Pasar al contenido principal

ESPUMAS AVANZADAS PARA PRODUCCION DE ENERGIA SOSTENIBLE Y CONCEPTOS DE AISLAMIENTO INTELIGENTE

PID2019-107022RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of microfibrillated cellulose from fast-growing poplar and olive tree pruning by physical pretreatment

  • Ibarra, David
  • Martín-Sampedro, Raquel
  • Wicklein, Bernd
  • Fillat, Ursula
  • Eugenio, María E.
Centro de Investigación Forestal (CIFOR), Motivated by the negative impact of fossil fuel consumption on the environment, the need arises to produce materials and energy from renewable sources. Cellulose, the main biopolymer on Earth, plays a key role in this context, serving as a platform for the development of biofuels, chemicals and novel materials. Among the latter, micro-and nanocellulose have been receiving increasing attention in the last few years. Their many attractive properties, i.e., thermal stability, high mechanical resistance, barrier properties, lightweight, optical transparency and ease of chemical modification, allow their use in a wide range of applications, such as Paper or polymer reinforcement, Packag-ing, construction, membranes, bioplastics, bioengineering, optics and electronics. In view of the increasing demand for traditional wood pulp (e.g., obtained from eucalypt, birch, pine, spruce) for micro/nanocellulose production, dedicated crops and agricultural residues can be interesting as raw materials for this purpose. This work aims at achieving microfibrillated cellulose production from fast-growing poplar and olive tree pruning using physical pretreatment (PFI refining) before the microfibrillation stage. Both raw materials yielded microfibrillated cellulose with similar properties to that obtained from a commercial industrial eucalypt pulp, producing films with high mechanical properties and low wettability. According to these properties, different applications for cellulose microfibers suspensions and films are discussed., This research was funded by Comunidad de Madrid and MCIU/AEI/FEDER, EU via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. B.W. acknowledges financial support from MINECO (Spain) and FEDER (EU) (project MAT2015-71117-R) and from MICINN (Spain) for a JIN contract (PID2019-107022RJ-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrophobic composite foams based on nanocellulose-sepiolite for oil sorption applications

  • Sanguanwong, Amaret
  • Flood, Adrian E
  • Ogawa, Makoto
  • Martín-Sampedro, Raquel
  • Darder, Margarita
  • Wicklein, Bernd
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
Centro de Investigación Forestal (CIFOR), TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl)-oxidized cellulose nanofibers (CNF) were assembled to fibrous clay sepiolite (SEP) by means of a high shear homogenizer and an ultrasound treatment followed by lyophilization using three different methods: normal freezing, directional freezing, and a sequential combination of both methods. Methyltrimethoxysilane (MTMS) was grafted to the foam surface by the vapor deposition method to introduce hydrophobicity to the resulting materials. Both the SEP addition (for the normal and directional freezing methods) and the refreezing preparation procedure enhanced the compressive strength of the foams, showing compressive moduli in the range from 28 to 103 kPa for foams loaded with 20% w/w sepiolite. Mercury intrusion porosimetry shows that the average pore diameters were in the range of 30-45 µm depending on the freezing method. This large porosity leads to materials with very low apparent density, around 6 mg/cm3, and very high porosity >99.5%. In addition, water contact angle measurement and Fourier-transform infrared spectroscopy (FTIR) were applied to confirm the foam hydrophobicity, which is suitable for use as an oil sorbent. The sorption ability of these composite foams has been tested using olive and motor oils as models of organophilic liquid adsorbates, observing a maximum sorption capacity of 138 and 90 g/g, respectively., This work was supported by Vidyasirimedhi Institute of Science and Technology (VISTEC), and funds (projects: MAT2015-71117-R and PID2019-105479RB-I00) from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU). R. M.-S. acknowledges the MINECO (Spain) for a “Juan de la Cierva-Incorporación” contract (IJCI-2016-28403) and B.W. thanks the AEI for a JIN project (PID2019-107022RJ-I00). Authors thank the Agencia Estatal CSIC (Spain) for supporting the Open Access publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Properties versus application requirements of solubilized lignins from an elm clone during different pre-treatments

  • Eugenio, María E.
  • Martín-Sampedro, Raquel
  • Santos, José I.
  • Wicklein, Bernd
  • Martín, Juan Antonio
  • Ibarra, David
13 Pág. Instituto de Ciencias Forestales (ICIFOR), Kraft pulping, organosolv process and acid hydrolysis were applied on an elm clone. The solubilized lignins were recovered and analyzed. Kraft pulping and acid hydrolysis led to lignins with higher phenolic OH content as result of extensive cleavage of β-O-4' linkages, as revealed by 13C solid state and 13C-1H heteronuclear single quantum coherence nuclear magnetic resonance. This depolymerization also yielded lower molecular weight lignins inferred by size exclusion chromatography. Contrarily, organosolv process gave rise to a lignin with a more preserved structure, maintaining a large number of β-O-4' linkages. Consequently, organosolv lignin presented lower phenolic OH content and higher molecular weight. Moreover, the high content of the labile native β-O-4' linkages in organosolv lignin resulted in a lower thermostability as compared to the kraft and acid lignins. On the other hand, the solubilized lignins from kraft and acid processes displayed an enrichment of S-units, whereas lignin from organosolv process was slightly enriched in G-units, containing all of them different native as well as pre-treatment derived units. These results could help to increase the inventory of lignin sources available for future lignin-based products, for which knowledge of the lignin properties versus application requirements is crucial., The authors wish to thank the Comunidad de Madrid and MCIU/AEI/FEDER, UE for funding this study via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. Raquel Martín-Sampedro acknowledges an IJCI contract (IJCI-2016-28403). BW acknowledges financial support (project MAT2015-71117-R from MINECO (Spain) and FEDER (EU); and PID2019-107022RJ-I00 from MICINN (Spain))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced Cellulose–Nanocarbon Composite Films for High-Performance Triboelectric and Piezoelectric Nanogenerators

  • González, Jaime
  • Ghaffarinejad, Ali
  • Ivanov, Maxim
  • Ferreira, Paula
  • Vilarinho, Paula M.
  • Borrás, Ana
  • Amorín, Harvey
  • Wicklein, Bernd
Natural polymers such as cellulose have interesting tribo- and piezoelectric properties for paper-based energy harvesters, but their low performance in providing sufficient output power is still an impediment to a wider deployment for IoT and other low-power applications. In this study, different types of celluloses were combined with nanosized carbon fillers to investigate their effect on the enhancement of the electrical properties in the final nanogenerator devices. Cellulose pulp (CP), microcrystalline cellulose (MCC) and cellulose nanofibers (CNFs) were blended with carbon black (CB), carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs). The microstructure of the nanocomposite films was characterized by scanning electron and probe microscopies, and the electrical properties were measured macroscopically and at the local scale by piezoresponse force microscopy. The highest generated output voltage in triboelectric mode was obtained from MCC films with CNTs and CB, while the highest piezoelectric voltage was produced in CNF-CNT films. The obtained electrical responses were discussed in relation to the material properties. Analysis of the microscopic response shows that pulp has a higher local piezoelectric d33 coefficient (145 pC/N) than CNF (14 pC/N), while the macroscopic response is greatly influenced by the excitation mode and the effective orientation of the crystals relative to the mechanical stress. The increased electricity produced from cellulose nanocomposites may lead to more efficient and biodegradable nanogenerators., This research was supported through the grants PID2019-107022RJ-I00, RYC2021-034164-I and PID2021-122708OB-C33, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, is acknowledged. AB and AG thank the ERC StG 3Dscavengers (grant agreement number 851929). MI, PF, and PV thank project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 and LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the antioxidant and antibacterial properties of lignin by physicochemical modification during sequential acid precipitation from Kraft black liquor

  • Eugenio, María E.
  • García-Fuentevilla, Luisa
  • Martín-Sampedro, Raquel
  • Santos, José I.
  • Wicklein, Bernd
  • Ibarra, David
23 Pág., Turning lignin from black liquor waste into value-added bioactive agents is one of the possible routes for improving the sustainability and profitability of lignocellulosic industry. However, due to chemical and structural variability of lignin, it is necessary to isolate specific lignin fractions from black liquor with the purpose to achieve samples with unique chemical and structural characteristics and therefore, specific biological activities. In this study, poplar lignin fractions isolated from Kraft black liquor by sequential acid precipitation at pH´s 7.5, 5 and 2.5 (denoted as P-7.5, P-5 and P-2.5) were characterized according to their physicochemical, antioxidant and antibacterial properties. In general, lignin fractions displayed a wide elimination of lateral chains (aryl-β ether and C–C) and, therefore a high phenolic content and low molecular weight, as the pH sequential precipitation was decreased from 7.5 to 2.5. Moreover, thermal analysis revealed that the P-7.5 lignin fraction showed higher thermal stability than P-2.5 and P-5. In terms of antioxidant activity, the P-7.5 lignin fraction, with a higher S/G ratio and a less oxidized structure compared to P-5 and P-2.5, exhibited higher antioxidant activity. In addition, lower antibacterial effect was observed for all lignin fractions against Escherichia coli compared to that obtained against Staphylococcus aureus. Among them, the P-2.5 and P-5 fractions, with higher phenolic content and lower molecular weight values than P-7.5, showed a greater antibacterial effect against S. aureus., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors wish to thank the project TED 2021-132122B-C1 funded by MCIN/AEI/10.13039/501100011033 and by the “European UnionNextGenerationEU/PRTR” and the project PID2022-141965OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” to support this study. BW acknowledges the grant PID2019-107022RJ-I00 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na-S batteries

  • Tabuyo-Martínez, Marina
  • Wicklein, Bernd
  • Aranda, Pilar
Rechargeable batteries are a major element in the transition to renewable energie systems, but the current lithium-ion battery technology may face limitations in the future concerning the availability of raw materials and socio-economic insecurities. Sodium-sulfur (Na-S) batteries are a promising alternative energy storage device for small- to large-scale applications driven by more favorable environmental and economic perspectives. However, scientific and technological problems are still hindering a commercial breakthrough of these batteries. This review discusses strategies to remedy some of the current drawbacks such as the polysulfide shuttle effect, catastrophic volume expansion, Na dendrite growth, and slow reaction kinetics by nanostructuring both the sulfur cathode and the Na anode. Moreover, a survey of recent patents on room temperature (RT) Na-S batteries revealed that nanostructured sulfur and sodium electrodes are still in the minority, which suggests that much investigation and innovation is needed until RT Na-S batteries can be commercialized. © 2021 Tabuyo-Martinez et al.; licensee Beilstein-Institut. License and terms: see end of document. All Rights Reserved., Financial support from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU) is acknowledged (MAT2015-71117-R and PID2019-105479RB-I00 projects). BW also thanks the MICINN for a JIN contract (PID2019-107022RJ-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructure-property relationships in composites of 8YSZ ceramics and in situ graphitized nanocellulose

  • Hudelja, Polona
  • Schmidt, Rainer
  • Amorín, Harvey
  • Drev, Sandra
  • Iveković, Aljaž
  • Abram, Anže
  • Kocjan, Andraž
  • Wicklein, Bernd
Ceramic matrix composites (CMC) of 8 mol.% yttria-stabilized zirconia (8YSZ) mixed with natural fiber nanocellulose (0.75, 1, 2 wt%) were prepared by spark plasma sintering (SPS). Nanocellulose markedly improved the densification of the 8YSZ ceramic matrix and induced significant grain size refinement. It was demonstrated that in situ graphitization of nanocellulose during the SPS processing resulted in 6 nm thin turbostratic graphite layers homogeneously covering the 8YSZ ceramic grains. The dielectric properties were analyzed by electrical impedance spectroscopy suggesting a low percolation threshold near or below ≈ 1.6 vol% graphite, above which mixed ionic-electronic conduction dominates. The CMCs are stable under reducing conditions (5%H2/Ar atmosphere) at least until 800 °C with a high conductivity of σdc = 0.17 S∙cm−1 even at 900 °C (8YSZ-2%CNF). These features make the 8YSZ-nanocellulose CMCs promising candidates for application in medium- to high-temperature electrochemical devices. © 2022, PH thanks the JECS Trust for funding a mobility stay project in 2020 (Contract 2019231). The Slovenian Research Agency is acknowledged for funding through research program P2-0087. RS acknowledges funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Spanish MINECO (Grant PID2020-118078RB-I00). Financial support from the Agencia Estatal de Investigación (AEI, Spain) and the FEDER Program (EU) is acknowledged (MAT2015-71117-R). BW thanks the MICINN for a JIN contract (PID2019-107022RJ-I00). HA thanks the MICINN for funding through project MAT2017-88788-R., Supplementary data associated with this article can be found in the online version at doi:10.1016/j.jeurceramsoc.2022.04.041, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Ti3C2Tx-alginate foams for energy harvesting and fire warning

  • Wicklein, Bernd
  • Yoo, Hyunjoon
  • Valurouthu, Geetha
  • Kim, Ji-Seok
  • Khan, Mannan
  • Mahato, Manmatha
  • Carosio, Federico
  • Gogotsi, Yury
  • Oh, Il-Kwon
Foams that combine seemingly opposite properties, such as high thermal insulation and electrical conductivity, are highly sought after for modern-day advanced applications. However, achieving a balance of these properties necessitates careful tuning of material compositions. Here, we prepared ice-templated Ti3C2Tx-alginate composite foams and investigated the role of Ti3C2Tx MXene in triboelectric energy production, thermal insulation, and flame retardancy. Our results show that adding 5 wt% Ti3C2Tx enhances the triboelectric output of 6 mm thick foams (380 V, 7.7 μA, 43 mW m-2) by 110%. Despite incorporating electrically conducting Ti3C2Tx, these macroporous composite foams have a thermal conductivity of only 62 mW m-1 K-1, while they also show flame-retardant properties, exhibiting self-extinguishing behavior. Finally, we demonstrate these composite foams for constructing smart fire alarm systems as they respond to small changes in electrical resistance induced by fire. Our findings prove that Ti3C2Tx is a versatile filler for biopolymer foams, introducing complementary functionalities that can be exploited in energy and safety applications., This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (2022H1D3A2A01082141). BW acknowledges the grants PID2019-107022RJ-I00 and RYC2021-034164-I, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. YG acknowledges The Charles T. and Ruth M. Bach Endowment, Drexel University., Peer reviewed