Pasar al contenido principal

OBTENCION, MODIFICACION Y CARACTERIZACION DE DIFERENTES LIGNINAS RESIDUALES PARA LA PRODUCCION DE NANOFIBRAS POR ELECTROSPINNING

RTI2018-096080-B-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario INSTITUTO NACIONAL DE INVESTIGACIÓN Y TECNOLOGÍA AGRARIA Y ALIMENTARIA - CSIC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of microfibrillated cellulose from fast-growing poplar and olive tree pruning by physical pretreatment

  • Ibarra, David
  • Martín-Sampedro, Raquel
  • Wicklein, Bernd
  • Fillat, Ursula
  • Eugenio, María E.
Centro de Investigación Forestal (CIFOR), Motivated by the negative impact of fossil fuel consumption on the environment, the need arises to produce materials and energy from renewable sources. Cellulose, the main biopolymer on Earth, plays a key role in this context, serving as a platform for the development of biofuels, chemicals and novel materials. Among the latter, micro-and nanocellulose have been receiving increasing attention in the last few years. Their many attractive properties, i.e., thermal stability, high mechanical resistance, barrier properties, lightweight, optical transparency and ease of chemical modification, allow their use in a wide range of applications, such as Paper or polymer reinforcement, Packag-ing, construction, membranes, bioplastics, bioengineering, optics and electronics. In view of the increasing demand for traditional wood pulp (e.g., obtained from eucalypt, birch, pine, spruce) for micro/nanocellulose production, dedicated crops and agricultural residues can be interesting as raw materials for this purpose. This work aims at achieving microfibrillated cellulose production from fast-growing poplar and olive tree pruning using physical pretreatment (PFI refining) before the microfibrillation stage. Both raw materials yielded microfibrillated cellulose with similar properties to that obtained from a commercial industrial eucalypt pulp, producing films with high mechanical properties and low wettability. According to these properties, different applications for cellulose microfibers suspensions and films are discussed., This research was funded by Comunidad de Madrid and MCIU/AEI/FEDER, EU via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. B.W. acknowledges financial support from MINECO (Spain) and FEDER (EU) (project MAT2015-71117-R) and from MICINN (Spain) for a JIN contract (PID2019-107022RJ-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Obtaining fermentable sugars from a highly productive elm clone using different pretreatments

  • Ibarra, David
  • Martín-Sampedro, Raquel
  • Jiménez-López Laura
  • Martín, Juan Antonio
  • Díaz, Manuel J.
  • Eugenio, María E.
21 Págs. This article belongs to the Special Issue Latest Progress in Lignocellulosic Bioethanol Production, The interest of supplying lignocellulosic materials for producing fermentable sugars has recently emerged in order to diminish the negative environmental effects of fossil fuels. In this study, the Ulmus minor clone Ademuz, characterized for its tolerance to Dutch elm disease and its rapid growth, was evaluated as a source of fermentable sugars. For that, different pretreatments, comprising autohydrolysis, dilute acid hydrolysis, acid catalyzed organosolv, and alkaline extraction, were evaluated at two levels of severity (pretreatment temperatures at 160◦ C and 180◦ C, except for alkaline extraction at 80◦ C and 160◦ C); and the resulting pretreated materials were enzymatically hydrolyzed for fermentable sugars production. The major extraction of lignin and hemicellulose was achieved during organosolv (48.9%, lignin; 77.9%, hemicellulose) and acid hydrolysis (39.2%, lignin; 95.0%, hemicellulose) at 180◦ C, resulting in the major enzymatic digestibility (67.7%, organosolv; 53.5% acid hydrolysis). Contrarily, under the most favorable conditions for autohydrolysis (180◦ C) and alkaline extraction (160◦ C), lower extraction of lignin and hemicellulose was produced (4.8%, lignin; 67.2%, hemicellulose, autohydrolysis; 22.6%, lignin; 33.1%, hemicellulose, alkaline extraction), leading to lower enzymatic digestibility (32.1%, autohydrolysis; 39.2%, alkaline extraction). Tak-ing into account the sugars produced during enzymatic hydrolysis of pretreated materials and the solubilized sugars from pretreatment liquors, the highest sugars (glucose and xylose) yield production (28.1%) per gram of biomass from U. minor clone Ademuz was achieved with acid catalyzed organosolv at 180◦ C., This research was funded by Comunidad de Madrid and MCIU/AEI/FEDER, UE via grant number SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. Raquel Martín Sampedro acknowledges an IJCI contract (IJCI-2016-28403)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the properties of nanocellulose-sepiolite hybrid nanopapers by varying the nanocellulose type and clay content

  • Martín-Sampedro, Raquel
  • Eugenio, María E.
  • Ibarra, David
  • Ruiz-Hitzky, Eduardo
  • Aranda, Pilar
  • Darder, Margarita
23 Pág., The development of nanocellulose-clay materials resulted of great relevance, as it opened up the applications of nanocellulose, but it still requires new approaches that could contribute to improve the preparation procedures and the features of this type of biohybrid materials. In this context, nanocellulose-sepiolite (NC-S) biocomposite foams and films have already been successfully tested for some applications. However, the influence of the nanocellulose properties on sepiolite-cellulose interactions, and consequently on the final properties and potential applications of NC-S biohybrid materials, has not been previously studied. To address this knowledge gap, four kinds of nanocelluloses produced from elm biomass (non-chemically pretreated lignocellulose and bleached cellulose nanofibers (LCNFs and CNFs, respectively), TEMPO-oxidized cellulose nanofibers (TOCNFs) and cellulose nanocrystals (CNCs)) were characterized and used to develop NC-S nanopapers. A stronger interaction was found between sepiolite and negatively charged nanocelluloses (TOCNFs and CNCs), improving their thermal stability and mechanical properties by increasing the sepiolite content. Furthermore, the type of nanocellulose and the sepiolite content could be adjusted to tune the flammability, water permeability and mechanical and optical properties of the NC-S nanopapers. Graphical abstract: [Figure not available: see fulltext.], This work was supported by the MCIN/AEI/https://doi.org/10.13039/501100011033 [Spain, project PID2019-105479RB-I00] and by MCIN/AEI/https://doi.org/10.13039/501100011033 and FEDER Una manera de hacer Europa [Spain & EU, projects MAT2015-71117-R and RTI2018-096080-B-C22]; Comunidad de Madrid [Spain, project SUSTEC-CM S2018/EMT-4348]; and MINECO [Spain, grant IJCI-2016-28403]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lignin-enriched residues from bioethanol production: Chemical characterization, isocyanate functionalization and oil structuring properties

  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Ibarra, David
  • Ballesteros, Ignacio
  • Franco, José Mariano
12 Pág., Lignin-enriched waste products from bioethanol production of agriculture residues were tested as structuring agents in castor oil once functionalized with hexamethylene diisocyanate. Cane bagasse, barley and wheat straw were processed through steam explosion, pre-saccharification and simultaneous saccharification and fermentation (PSSF). Alternatively, cane bagasse was submitted to steam explosion and enzymatic hydrolysis (EH). Several Nuclear Magnetic Resonance techniques were used to characterize both residues and NCO-functionalized counterparts. The β-O-4'/resinol/phenylcoumaran content and hydroxyphenyl/guaiacyl/syringyl distribution depend on biomass source, pretreatment, and enzymatic hydrolysis. Total hydroxyl content (from 1.23 for cane bagasse to 1.85 for wheat straw residues), aromatic/aliphatic hydroxyl ratio (0.78 for cane bagasse and 0.61 and 0.49 for barley and wheat straw residues, respectively) and S/G ratio (ranging from 0.25 to 0.86) influence the NCO-functionalization and oleogel rheological response. Oleogels obtained with barley straw residues exhibited the highest values of the storage modulus; around 2 × 105 Pa and 104 Pa for 25% and 20% contents, respectively. PSSF process showed weaker modification, leading to softer viscoelastic response compared to EH. These oleogels exhibited rheological properties similar to lubricating greases of different NLGI grades. Therefore, we herein show an integrative protocol for the valorization of lignin-enriched residues from bioethanol production as potential thickeners of lubricating greases., This work is part of two coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The financial support is gratefully acknowledged. A.M.B-L. also acknowledges the Ph.D. Research Grant FPU16/03697 from MECD (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emulsion Stabilization by Cationic Lignin Surfactants Derived from Bioethanol Production and Kraft Pulping Processes

  • Yuliestyan, Avido
  • Partal, Pedro
  • Navarro, Francisco J.
  • Martín-Sampedro, Raquel
  • Ibarra, David
  • Eugenio, María E.
14 Pág. Centro de Investigación Forestal (CIFOR), Oil-in-water bitumen emulsions stabilized by biobased surfactants such as lignin are in line with the current sustainable approaches of the asphalt industry involving bitumen emulsions for reduced temperature asphalt technologies. With this aim, three lignins, derived from the kraft pulping and bioethanol industries, were chemically modified via the Mannich reaction to be used as cationic emulsifiers. A comprehensive chemical characterization was conducted on raw lignin-rich products, showing that the kraft sample presents a higher lignin concentration and lower molecular weight. Instead, bioethanol-derived samples, with characteristics of non-woody lignins, present a high concentration of carbohydrate residues and ashes. Lignin amination was performed at pH = 10 and 13, using tetraethylene pentamine and formaldehyde as reagents at three different stoichiometric molar ratios. The emulsification ability of such cationic surfactants was firstly studied on prototype silicone oil-in-water emulsions, attending to their droplet size distribution and viscous behavior. Among the synthetized surfactants, cationic kraft lignin has shown the best emulsification performance, being used for the development of bitumen emulsions. In this regard, cationic kraft lignin has successfully stabilized oil-in-water emulsions containing 60% bitumen using small surfactant concentrations, between 0.25 and 0.75%, which was obtained at pH = 13 and reagent molar ratios between 1/7/7 and 1/28/28 (lignin/tetraethylene pentamine/formaldehyde)., This research is part of SUP&R ITN (FP7-PEOPLE-2013-ITN, Grant agreement 607524) and GreenAsphalt project (ref. 802C1800001) co-funded 80% by FEDER European Programme and 20% by Junta de Andalucía (Consejería de Economía, Conocimiento, Empresas y Unversidades/Agencia IDEA). The authors also wish to thank Comunidad de Madrid and MCIU/AEI/FEDER, UE via grant number SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. The contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting the interaction, exchange of knowledge and collaborations in the field of lignin valorization is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A sustainable methanol-based solvent exchange method to produce nanocellulose-based ecofriendly lubricants

  • Roman, Claudia
  • García-Morales, Moisés
  • Eugenio, María E.
  • Ibarra, David
  • Martín-Sampedro, Raquel
  • Delgado, Miguel A.
10 Pág.  Centro de Investigación Forestal (CIFOR)., A prospective methodology aimed to develop totally sustainable oleogels with potential application in lubrication is reported. Oleogels were prepared with cellulose nanofibrils from elm pulps in castor oil. Even at a concentration as low as 1.4 wt%, the oleogels showed rheological behaviors similar to a traditional lithium grease used as reference. In that sense, the high thickening power of cellulose nanofibers was remarked. Never-dried bleached and unbleached elm pulps were mechanically treated with PFI mill refiner and microfluidizer. Moreover, as an alternative way of producing cellulose nanofibrils, the never-dried bleached elm pulp was chemically oxidized using 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO). The three types of nanofibers were characterized and used in the production of oleogels. The great challenge was to remove the high amount of water retained by the nanofibrils during the nanofibrillation treatment before it was incorporated into the vegetable oil-based lubricant. Alternative strategies such as liophilization or drying failed because the nanofibers, with very high specific surface and strong capacity to interact among them by hydrogen bonding, underwent severe aggregation. Instead, the proposed methanol-based solvent exchange method enabled the transfer of the cellulose nanofibrils from the origin hydrogel to the vegetable oil with no detriment of both their aspect ratio and thickening capacity. Chemical considerations are provided with regard to such a solvent-mediated method, which yielded homogeneous and storage-stable oleogels. This work may attract the interest of lubricant manufacturers to produce nanocellulose-based eco-lubricating greases for industrial applications., This work is part of a Research Project sponsored by “Programa Operativo FEDER-Andalucía 2014–2020” (UHU-1255843). Also, part of this investigation is included in the Research Projects “RTI2018-096080-B-C21” and RTI2018-096080-B-C22 supported by the MCIU/AEI/ FEDER/UE, and SUSTEC-CM S2018/EMT-4348 by Comunidad de Madrid. Funding for open access charge: Universidad de Huelva/CBUA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Properties versus application requirements of solubilized lignins from an elm clone during different pre-treatments

  • Eugenio, María E.
  • Martín-Sampedro, Raquel
  • Santos, José I.
  • Wicklein, Bernd
  • Martín, Juan Antonio
  • Ibarra, David
13 Pág. Instituto de Ciencias Forestales (ICIFOR), Kraft pulping, organosolv process and acid hydrolysis were applied on an elm clone. The solubilized lignins were recovered and analyzed. Kraft pulping and acid hydrolysis led to lignins with higher phenolic OH content as result of extensive cleavage of β-O-4' linkages, as revealed by 13C solid state and 13C-1H heteronuclear single quantum coherence nuclear magnetic resonance. This depolymerization also yielded lower molecular weight lignins inferred by size exclusion chromatography. Contrarily, organosolv process gave rise to a lignin with a more preserved structure, maintaining a large number of β-O-4' linkages. Consequently, organosolv lignin presented lower phenolic OH content and higher molecular weight. Moreover, the high content of the labile native β-O-4' linkages in organosolv lignin resulted in a lower thermostability as compared to the kraft and acid lignins. On the other hand, the solubilized lignins from kraft and acid processes displayed an enrichment of S-units, whereas lignin from organosolv process was slightly enriched in G-units, containing all of them different native as well as pre-treatment derived units. These results could help to increase the inventory of lignin sources available for future lignin-based products, for which knowledge of the lignin properties versus application requirements is crucial., The authors wish to thank the Comunidad de Madrid and MCIU/AEI/FEDER, UE for funding this study via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. Raquel Martín-Sampedro acknowledges an IJCI contract (IJCI-2016-28403). BW acknowledges financial support (project MAT2015-71117-R from MINECO (Spain) and FEDER (EU); and PID2019-107022RJ-I00 from MICINN (Spain))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Populus alba L., an Autochthonous Species of Spain: A Source for Cellulose Nanofibers by Chemical Pretreatment

  • Ibarra, David
  • Martín-Sampedro, Raquel
  • Wicklein, Bernd
  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Valdehita Torija, Ana
  • Navas, José María
  • Eugenio, María E.
16 Pág., In order to identify new sustainable sources for producing cellulose nanofibers (CNFs), fast-growing poplar (Populus alba L.) wood was evaluated herein. For that purpose, bleached poplar kraft pulp was produced and submitted to TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical) mediated oxidation (TEMPO-ox) chemical pretreatment followed by microfluidization. The resulting CNFs were thoroughly characterized, including a rheological study at different pH values. Poplar CNFs showed properties comparable to eucalypt CNFs (reference material for CNFs production), showing high carboxylate content (1048 ± 128 µmol g−1), fibrillation yield (87.3% ± 8.1%), optical transmittance (83% at 700 nm) and thermal stability (up to more than 200 °C). Regarding the rheological study, whereas pH from 4 to 10 did not produce significant changes in rheological behavior, a reduction of pH down to 1 led to an order-of-magnitude increase on the viscoelastic functions. Therefore, poplar CNF shows potential in the pH-sensitive hydrogels application field. Finally, the possible ecotoxicity of poplar CNF was assessed. The decrease in cell viability was very low so that only concentrations causing a 10% cytotoxicity could be calculated for the assay detecting alterations in cell metabolism (10 µg mL−1) and plasma membrane integrity (60 µg mL−1)., This research was funded by Comunidad de Madrid and MCIU/AEI/FEDER, EU via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Different Kraft lignin sources for electrospun nanostructures production: Influence of chemical structure and composition

  • García-Fuentevilla, Luisa
  • Rubio-Valle, José F.
  • Martín-Sampedro, Raquel
  • Valencia, Concepción
  • Eugenio, María E.
  • Ibarra, David
14Pág., This work focuses on the structural features and physicochemical properties of different Kraft lignins and how they can influence the electrospinning process to obtain nanostructures. Structural features of Kraft lignins were characterized by nuclear magnetic resonance, size exclusion chromatography, fourier-transform infrared spectroscopy, and thermal analysis, whereas chemical composition was analyzed by standard method. The addition of cellulose acetate (CA) improves the electrospinning process of Kraft lignins (KL). Thus, solutions of KL/CA at 30 wt% with a KL:CA weight ratio of 70:30 were prepared and then physicochemical and rheologically characterized. The morphology of electrospun nanostructures depends on the intrinsic properties of the solutions and the chemical structure and composition of Kraft lignins. Then, surface tension, electrical conductivity and viscosity of eucalypt/CA and poplar/CA solutions were suitable to obtain electrospun nanostructures based on uniform cross-linked nanofibers with a few beaded fibers. It could be related with the higher purity and higher linear structure, phenolic content and S/G ratios of lignin samples. However, the higher values of electrical conductivity and viscosity of OTP/CA solutions resulted in electrospun nanostructure with micro-sized particles connected by thin fibers, due to a lower purity, S/G ratio and phenolic content and higher branched structure in OTP lignin., This work is part of two coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. The authors also wish to thank the Comunidad de Madrid and MCIU/AEI/FEDER, EU for funding this study via Projects SUSTEC-CM S2018/EMT-4348. The authors also acknowledge the pre-doctoral grants from José Fernando Rubio Valle (Ref. PRE2019-090632). The contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting interaction, exchange of knowledge and collaborations in the field of lignin valorization is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Laccase Detoxification on Bioethanol Production from Liquid Fraction of Steam-Pretreated Olive Tree Pruning

  • Ibarra, David
  • Eugenio, María E.
  • Alvira, Pablo
  • Ballesteros, Ignacio
  • Ballesteros, Mercedes
  • Negro, María José
14 Pág., During lignocellulosic bioethanol production, the whole slurry obtained by steam explosion is filtered, generating a water-insoluble fraction rich in cellulose which is used for saccharification and ethanol fermentation, as well as a liquid fraction containing solubilised glucose and xylose but also some inhibitory by-products (furan derivatives, weak acids and phenols), which limits its use for this purpose. Since utilization of this liquid fraction to ethanol is essential for an economically feasible cellulosic ethanol process, this work studied a laccase from Myceliophthora thermophila to detoxify the liquid fraction obtained from steam-pretreated olive tree pruning (OTP) and to overcome the effects of these inhibitors. Then, the fermentation of laccase-treated liquid fraction was evaluated on ethanol production by different Saccharomyces cerevisiae strains, including the Ethanol Red, with the capacity to ferment glucose but not xylose, and the xylose-fermenting recombinant strain F12. Laccase treatment reduced total phenols content by 87% from OTP liquid fraction, not affecting furan derivatives and weak acids concentration. Consequently, the fermentative behavior of both Ethanol Red and F12 strains was improved, and ethanol production and yields were increased. Moreover, F12 strain was capable of utilizing some xylose, which increased ethanol production (10.1 g/L) compared to Ethanol Red strain (8.6 g/L)., This research was funded by Comunidad de Madrid via Project SUSTEC‐CM S2018/EMT‐ 4348; Spanish MCINN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” via Project RTI2018‐096080‐B‐C22; and Spanish MCINN via Project TED2021‐132122B‐C21. In addition, part of the experimental work has been carried out in the framework of the project financed by Spanish MICINN (ENE2011-29112-C02-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-Catalyzed Polymerization of Kraft Lignin from Eucalyptus globulus: Comparison of Bacterial and Fungal Laccases Efficacy

  • García-Fuentevilla, Luisa
  • Domínguez, Gabriela
  • Martín-Sampedro, Raquel
  • Hernández, Manuel
  • Arias, María Enriqueta
  • Santos, José I.
  • Ibarra, David
  • Eugenio, María E.
  • Arias, María Enriqueta
20 Pág., Kraft lignin, a side-stream from the pulp and paper industry, can be modified by laccases for the synthesis of high added-value products. This work aims to study different laccase sources, including a bacterial laccase from Streptomyces ipomoeae (SiLA) and a fungal laccase from Myceliophthora thermophila (MtL), for kraft lignin polymerization. To study the influence of some variables in these processes, a central composite design (CCD) with two continuous variables (enzyme concentration and reaction time) and three levels for each variable was used. The prediction of the behavior of the output variables (phenolic content and molecular weight of lignins) were modelled by means of response surface methodology (RSM). Moreover, characterization of lignins was performed by Fourier-transform infrared (FTIR) spectroscopy and different nuclear magnetic resonance (NMR) spectroscopy techniques. In addition, antioxidant activity was also analyzed. Results showed that lignin polymerization (referring to polymerization as lower phenolic content and higher molecular weight) occurred by the action of both laccases. The enzyme concentration was the most influential variable in the lignin polymerization reaction within the range studied for SiLA laccase, while the most influential variable for MtL laccase was the reaction time. FTIR and NMR characterization analysis corroborated lignin polymerization results obtained from the RSM., This research was funded by Comunidad de Madrid via Project SUSTEC-CM S2018/EMT-4348; MICINN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” via Project RTI2018-096080-B-C22; and MICINN via Project TED2021-132122B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NMR Study on Laccase Polymerization of Kraft Lignin Using Different Enzymes Source

  • Ibarra, David
  • García-Fuentevilla, Luisa
  • Domínguez, Gabriela
  • Martín-Sampedro, Raquel
  • Hernández, Manuel
  • Arias, María Enriqueta
  • Santos, José I.
  • Eugenio, María E.
17 Pág., The usage of laccases is a sustainable and environmentally friendly approach to modifying the Kraft lignin structure for use in certain applications. However, the inherent structure of Kraft lignin, as well as that resulting from laccase modification, still presents challenges for fundamental comprehension and successful lignin valorization. In this study, bacterial and fungal laccases were employed to modify eucalypt Kraft lignin. To evaluate the type and range of the chemical and structural changes of laccase-treated lignins, different NMR techniques, including solution 1H and 2D NMR (heteronuclear single quantum correlation (HSQC)), and solid-state 13C NMR, were applied. Size exclusion chromatography and infrared spectroscopy were also used. Interestingly, HSQC analysis showed substantial changes in the oxygenated aliphatic region of lignins, showing an almost complete absence of signals corresponding to side-chains due to laccase depolymerization. Simultaneously, a significant loss of aromatic signals was observed by HSQC and 1H NMR, which was attributed to a deprotonation of the lignin benzenic rings due to polymerization/condensation by laccase reactions. Then, condensed structures, such as α-5', 5-5', and 4-O-5', were detected by HSQC and 13C NMR, supporting the increment in molecular weight, as well as the phenolic content reduction determined in lignins., This research was funded by Comunidad de Madrid via Project SUSTEC-CM S2018/EMT-4348; MCINN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” via Project RTI2018-096080-B-C22; and MCINN via Project TED2021-132122B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose Nanofibers from a Dutch Elm Disease-Resistant Ulmus minor Clone

  • Jiménez-López Laura
  • Eugenio, María E.
  • Ibarra, David
  • Darder, Margarita
  • Martín, Juan Antonio
  • Martín-Sampedro, Raquel
21 pág., The potential use of elm wood in lignocellulosic industries has been hindered by the Dutch elm disease (DED) pandemics, which have ravaged European and North American elm groves in the last century. However, the selection of DED-resistant cultivars paves the way for their use as feedstock in lignocellulosic biorefineries. Here, the production of cellulose nanofibers from the resistant Ulmus minor clone Ademuz was evaluated for the first time. Both mechanical (PFI refining) and chemical (TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation) pretreatments were assessed prior to microfluidization, observing not only easier fibrillation but also better optical and barrier properties for elm nanopapers compared to eucalyptus ones (used as reference). Furthermore, mechanically pretreated samples showed higher strength for elm nanopapers. Although lower nanofibrillation yields were obtained by mechanical pretreatment, nanofibers showed higher thermal, mechanical and barrier properties, compared to TEMPO-oxidized nanofibers. Furthermore, lignin-containing elm nanofibers presented the most promising characteristics, with slightly lower transparencies., This research was funded by FEDER (EU) and MINECO (Spain) (project MAT2015-71117-R), by FEDER (EU), AEI (Spain) and MICIU (Spain) (project RTI2018-096080-B-C22)) and by Comunidad de Madrid (Spain) (project SUSTEC-CM-S2018/EMT-4348). MINECO (Spain) also supported this work via contract IJCI-2016-28403., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose Pulp- and Castor Oil-Based Polyurethanes for Lubricating Applications: Influence of Streptomyces Action on Barley and Wheat Straws

  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Blánquez, Alba
  • Hernández, Manuel
  • Eugenio, María E.
  • Franco, José Mariano
15 Pág., The replacement of mineral oils and non-renewable gelling agents is an imperative requirement for the lubricant industry in the near future. In this framework, cellulose pulp and castor oil are proposed as sustainable substitutes for these components. Biological treatment has been explored and evaluated to enhance the dispersing and thickening properties of cellulose pulp in oil media. Streptomyces sp. MDG147 and MDG301 strains were employed to modify agricultural wheat and barley straw residues from which cellulose pulp was obtained afterwards. In addition, an environmentally friendly process for the production of cellulose-pulp-/castor-oil-based polyurethanes was applied, in which neither catalysts nor harmful solvents were used, resulting in chemical oleogels. These oleogels were rheologically and tribologically characterized to evaluate their performance as lubricating greases. The enzymatic activity pattern developed was dependent on the raw material, the strain type, and the temperature, influencing the cellulose pulp's composition, polymerization degree, and crystallinity. These modified characteristics tuned the rheological behavior of the different oleogels, providing a beneficial range of viscoelastic responses and viscosity values that were generally favored by the Streptomyces action. Furthermore, the friction coefficient and dimensions of wear scars measured in a tribological contact were comparable to, or even lower than, those found with commercial and other bio-based lubricating greases that have previously been studied., This work is part of two coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) sponsored by MICIU-FEDER. A.M.B.-L. has received a Ph.D. Research Grant from the Ministerio de Educación, Cultura y Deporte (FPU16/03697). We gratefully acknowledge the financial support, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kraft lignins from different poplar genotypes obtained by selective acid precipitation and their use for the production of electrospun nanostructures

  • Ibarra, David
  • García-Fuentevilla, Luisa
  • Rubio-Valle, José F.
  • Martín-Sampedro, Raquel
  • Valencia, Concepción
  • Eugenio, María E.
13 Pág., Kraft lignins from different poplar genotypes (Populus alba L. “PO-10-10-20” and Populus x canadensis “Ballotino”) were isolated by selective acid precipitation (pH 5 and 2.5), chemically and structurally characterized and used together with cellulose acetate (CA) for the manufacture of nanostructures by electrospinning. Generally, lignins showed a predominance of β-β´ resinols substructures (4.7–5.3 linkages per 100 aromatic units) followed by β-O-4´ (1.6–3.3 linkages per 100 aromatic units) and β-5´ phenylcoumarans (0.5–2.4 linkages per 100 aromatic units) and a high abundance of S lignin units (S/G 3.0–4.3). Moreover, lignins showed low molecular weight values (between 5.14 and 5.59 KDa) and high phenolic content (529.1 –644.5 mg GAE/g lignin). Regarding the electrospun nanostructures obtained from Kraft lignins/CA solutions, all of them presented uniform cross-linked nanofibers with a few beaded fibers according to the suitable range values of surface tension (29.18–29.71 mN/cm), electrical conductivity (131.2–158.9 μS/cm) and dynamic viscosity (0.28–0.32 Pa.s) that biopolymer solutions showed. Nevertheless, electrospun Kraft lignins/CA nanostructures with larger mean diameters were generated from lignins at pH 5, which displayed higher phenolic and β-O-4´ contents compared to lignins at pH 2.5. On the other hand, the type of poplar lignin genotype did not exert a significant influence on the mean fiber diameter., This work is part of two coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The authors also wish to thank the Comunidad de Madrid and MCIN/AEI/FEDER, EU for funding this study via Projects SUSTEC-CM S2018/EMT-4348 and TED2021-132122B-C21, respectively. The authors also acknowledge the pre-doctoral grants from José Fernando Rubio Valle (Ref. PRE2019-090632)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting enzymatic hydrolysis of steam-pretreated softwood by laccase and endo-β-mannanase enzymes from Streptomyces ipomoeae CECT 3341

  • Eugenio, María E.
  • Domínguez, Gabriela
  • Molina-Guijarro, José M.
  • Hernández, Manuel
  • Arias, María Enriqueta
  • Ibarra, David
23 Pág., Ligninases and hemicellulases are crucial as accessory enzymes to increase the enzymatic hydrolysis of lignocellulose, boosting sugars production from which biofuels and bioproducts could be obtained. In order to find new sources of these accessory enzymes, this study evaluates the potential of laccase and mannanase enzymes from Streptomyces ipomoeae for improving the conventional hydrolysis with commercial cellulases of steam-pretreated softwood. For that, different laccase treatment and mannanase supplementation strategies were performed. S. ipomoeae laccase increased both glucose and xylose production (17.8% and 9.3%, respectively), which was attributed to a removal of phenols of 29%. Moreover, the combination of laccase and alkaline extraction produced a lignin reduction of 16.2%, improving the glucose and xylose production by almost 41.3% and 44.9%, respectively. On the other hand, the supplementation of S. ipomoeae mannanase to the hydrolysis 24 h before the addition of cellulases increased the glucose (18.4%), xylose (12.3%), and mannose (47.2%) production., This research was funded by Comunidad de Madrid via Project SUSTEC‐CM S2018/EMT‐ 4348; Spanish MCINN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” via Project RTI2018‐096080‐B‐C22; and Spanish MCINN via Projects TED2021‐132122B‐C21 (LIGNUCELL) and PID2022-141965OB-C21 (SUS-BIO-FILM). María E. Eugenio and David Ibarra are grateful for the support of the Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy (SusPlast-CSIC), Madrid, Spain and Interdisciplinary Platform for Sustainability and Circular Economy (SosEcoCir-CSIC), Madrid, Spain; and Interdisciplinary Platform Horizonte Verde (CSIC), Madrid, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co-production of soluble sugars and lignin from short rotation white poplar and black locust crops

  • Jiménez-López Laura
  • Martín-Sampedro, Raquel
  • Eugenio, María E.
  • Santos, José I.
  • Sixto Blanco, Hortensia Concepción
  • Cañellas, Isabel
  • Ibarra, David
27 Pág., Co-production of sugars and lignin from short rotation white poplar and black locust crops is evaluated. Acid-catalyzed ethanol/water organosolv and dilute acid pretreatments are analyzed. Resulting pretreated materials are hydrolyzed enzymatically for sugar production, whereas solubilized lignins from pretreatment liquors are precipitated, analyzed by analytical standard, and characterized by FTIR spectroscopy, SEC chromatography, and solid-state 13C NMR. Organosolv produces in both materials a high delignification degree (46–50%) and a considerable hemicelluloses removal (62–67%), while acid hydrolysis is more efficient at removing hemicelluloses (86–90%), showing a delignification of 43% (white poplar) and 31% (black locust). Organosolv followed by enzymatic hydrolysis results in 37.8% (white poplar) and 38.2% (black locust) total sugars yields, whereas acid pretreatment and subsequent saccharification show higher sugars yields for white poplar (43.3%) and lower for black locust (29.1%). Regarding lignin samples, higher concentrations are recovered from organosolv liquors of both materials (67.8% and 44.9% yields for white poplar and black locust, respectively) compared to the quantities extracted from acid liquors of white poplar (4.6%) and black locust (6.8%). Organosolv lignins display a lower content of S units and phenols, and higher molecular weights. Contrary, acid lignins consist mainly of phenolic fragments with a higher content of S units and lower molecular weights., The authors wish to thank the Comunidad de Madrid and MICIU for funding this study via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. Raquel Martín Sampedro acknowledges an IJCI contract (IJCI-2016, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of lignin-enriched side-streams from different biomass conversion processes as thickeners in bio-lubricant formulations

  • Borrero-López, Antonio M.
  • Martín-Sampedro, Raquel
  • Ibarra, David
  • Valencia, Concepción
  • Eugenio, María E.
  • Franco, José Mariano
16 Pág., This study explores the suitability of residual lignin-containing fractions generated as side-streams in different conversion processes of eucalypt and pine woods as thickening agents in bio-lubricant formulations. These conversion processes included fermentable sugars extraction by autohydrolysis or steam explosion and kraft pulping. Structural properties of lignin fractions were characterized by FTIR, 1H and 13C NMR, two-dimensional NMR, TGA and SEC, whereas their compositions were analysed by standard analytical methods. On the other hand, chemical oleogels were prepared with NCO-functionalized residual lignin fractions, and characterized by means of rheological, tribological and AFM techniques. Hydrolysis lignin fractions exhibited a great content of carbohydrates, especially glucose (46.0-48.5%), xylose (4.3-15.6%) and lignin (32.5-39.9%) with a well-maintained structure, displaying the main inter-unit linkages and low phenolic content. By contrast, kraft lignin fractions presented a lower carbohydrate content, mainly xylose (3.4-4.3%), and higher content (44.9-67%) of severely degraded lignin, showing a dramatic reduction of inter-unit linkages, and thereby high phenolic content. The rheological response of NCO-functionalized lignin fractions-based oleogels is highly influenced by the composition and chemical structure of residual lignin fractions. Moreover, these oleogels presented suitable tribological properties with values of the friction coefficient lower than those typically exhibited by standard lubricating greases., This work is part of two coordinated research projects ( RTI2018-096080-B-C21 and RTI2018-096080-B-C22 ) sponsored by MICIU - FEDER and another sponsored by the Comunidad de Madrid ( SUSTEC-CM S2018/EMT-4348 ). One of the authors, A.M.B.-L., has received a Ph.D. Research Grant from the Ministerio de Educación, Cultura y Deporte ( FPU16/03697 ). We gratefully acknowledge their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laccases as versatile enzymes: from industrial uses to novel applications

  • Moreno, Antonio
  • Ibarra, David
  • Eugenio, María E.
  • Tomás-Pejó, E.
14 Pág., The application of enzymes offers an enormous potential in the improvement of existing industrial procedures and in the establishment of newprocesses for obtaining high-added value products. Enzymes provide cleaner andmore efficient industrial processes and contribute to the sustainability concept. In this sense, laccases are very versatile biocatalysts currently used in food, textile and pulp and paper sectors among others. During the last years, scientific efforts have been diverted to the exploitation of such interesting enzymes in novel fields like lignocellulosic biorefineries, biosensors or enzymatic biofuel cells. This review provides a general vision of the use of laccase enzymes describing their main characteristics and mode of action. Furthermore, their current uses in industrial processes are summarized and themost novel potential application of laccases are revealed. The increasing interest on laccases is also demonstrated by the research efforts on enzymeengineering as it is detailed in this review., The authors want to acknowledge the Spanish Ministry of Science and Innovation for the financial support provided through the grant RTI2018-096080-B-C22 and the Community of Madrid for the support offered in the framework of the project SUSTEC-CM (P2018/EMT-4348), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioethanol lignin-rich residue from olive stones for electrospun nanostructures development and castor oil structuring

  • Rubio-Valle, José F.
  • Martín-Alfonso, José Enrique
  • Eugenio, María E.
  • Ibarra, David
  • Oliva, José Miguel
  • Manzanares, Paloma
  • Valencia, Concepción
13 Pág., This work describes the chemical and structural characterization of a lignin-rich residue from the bioethanol production of olive stones and its use for nanostructures development by electrospinning and castor oil structuring. The olive stones were treated by sequential acid/steam explosion pretreatment, further pre-saccharification using a hydrolytic enzyme, and simultaneous saccharification and fermentation (PSSF). The chemical composition of olive stone lignin-rich residue (OSL) was evaluated by standard analytical methods, showing a high lignin content (81.3 %). Moreover, the structural properties were determined by Fourier-transform infrared spectroscopy, nuclear magnetic resonance, and size exclusion chromatography. OSL showed a predominance of β-β' resinol, followed by β-O-4' alkyl aryl ethers and β-5' phenylcoumaran substructures, high molecular weight, and low S/G ratio. Subsequently, electrospun nanostructures were obtained from solutions containing 20 wt% OSL and cellulose triacetate with variable weight ratios in N, N-Dimethylformamide/Acetone blends and characterized by scanning electron microscopy. Their morphologies were highly dependent on the rheological properties of polymeric solutions. Gel-like dispersions can be obtained by dispersing the electrospun OSL/CT bead nanofibers and uniform nanofiber mats in castor oil. The rheological properties were influenced by the membrane concentration and the OSL:CT weight ratio, as well as the morphology of the electrospun nanostructures., This work is a collaborative research of different projects: RTI2018-096080-B-C21 , RTI2018-096080-B-C22 , PID2021-125637OB-I00 , TED2021-132122B-C21 and ENE2017-85819-C2-2-R funded by MCIN /AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, SUSTEC-CM S2018/EMT-4348 project funded by Comunidad de Madrid . The authors gratefully acknowledge the aforementioned financial support. J.F.R.-V. additionally has received a Ph.D. Research Grant PRE2019-090632 from Spain's Ministry of Science and Innovation . The financial support is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and thermal analysis of lignin streams from Robinia pseudoacacia L. generated during organosolv and acid hydrolysis pre-treatments and subsequent enzymatic hydrolysis

  • Martín-Sampedro, Raquel
  • Santos, José I.
  • Eugenio, María E.
  • Wicklein, Bernd
  • Jiménez-López Laura
  • Ibarra, David
12 Pág., Lignin streams produced in biorefineries are commonly used to obtain energy. In order to increase the competitiveness of this industry, new lignin valorization routes are necessary, for which a depth characterization of this biological macromolecule is essential. In this context, this study analyzed lignin streams of Robinia pseudoacacia L. generated during organosolv and acid hydrolysis pre-treatments and during the subsequent enzymatic hydrolysis. These lignins included dissolved lignins from pre-treatment liquors and saccharification lignins from pre-treated materials. Chemical composition and structural features were analyzed by analytical standard methods and Fourier Transform Infrared spectroscopy (FTIR), size exclusion chromatography (SEC), 13C solid state nuclear magnetic resonance (13C NMR) and 1H-13C two-dimensional nuclear magnetic resonance (2D NMR); while thermal characterization included thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). In general, all studied lignins contained a predominance of β-O-4' aryl ether linkages, followed by resinol (β-β') and phenylcoumaran (β-5'), with a predominance of syringyl over guaiacyl and hydroxyphenyl units. Nevertheless, the dissolved lignins revealed a removal of linkages, especially β-O-4', leading to an enrichment of phenolic groups. Moreover, high thermal stability and good thermoplasticity were characteristics of these lignins. Contrary, the saccharification lignins exhibited a more intact structure, but with an important remaining carbohydrates content., The authors wish to thank the Comunidad de Madrid and MICINN for funding this study via Projects SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. Bernd Wicklein acknowledges an IJCI contract (IJCI-2015-23886) and Raquel Martín-Sampedro an IJCI contract (IJCI-2016-28403). Isabel Cañellas and Hortensia Sixto from Silviculture and Forest Management Department is greatly acknowledged for R. pseudoacacia L. supply., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of Lignin Residues from Bioethanol Production of Olive Stones as Green Chemical Thickener of Epoxidized Linseed Oil

  • Cortés-Triviño, Esperanza
  • Valencia, Concepción
  • Franco, José Mariano
  • Oliva, José Miguel
  • Manzanares, Paloma
  • Eugenio, María E.
  • Ibarra, David
18 Pág., This work focused on the characterization of lignin residues from bioethanol production of olive stones (OS) and the use of these residues to chemically thicken epoxidized linseed oil (ELO). OS were processed by an acid/steam explosion pretreatment, followed by pre-saccharification, using different enzyme dosages, and simultaneous saccharification and fermentation. The chemical composition of the OS lignin residues was analysed, revealing a high lignin content (66.6–69.5%), and lower quantities of glucan (17.4–19.3%) and xylan (2.8–2.9%). Whereas, the structural properties of OS lignin residues were characterized by Fourier-transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), thermogravimetric analysis and size exclusion chromatography (SEC). OS lignin residues displayed the main inter-unit linkages (β–β′ resinol (51.0–59.0%), followed by β-O-4′ alkyl aryl ethers (27.0–35.2%) and β-5′ phenylcoumaran (11.4–13.2%) substructures), high molecular weights (22,000–25900 Da), low S/G ratios (1.2–1.5) and phenolic groups content (48–55 mg GAE/g lignin). Moreover, OS lignin residues were dispersed in ELO to obtain thickened formulations, which were characterized by FTIR and NMR. Oil thickening was achieved by promoting the chemical crosslinking between lignocellulose hydroxyl groups and ELO epoxy groups, enabling the compatibilization of both components. Up to tenfold viscosity increment of the resulting thickened formulations in relation to ELO’s viscosity was observed. Besides, thickened formulations exhibited viscoelastic properties, evincing oil structuration to some extent. Graphical Abstract: (Figure presented.), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work is collaborative research which is part of different projects: coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) and project PID2022-141965OB-C21 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”, TED 2021-132122B-C1 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European UnionNextGenerationEU/PRTR”, ENE2017-85819-C2-2-R funded by MINECO, and SUSTEC-CM S2018/EMT-4348 project funded by Comunidad de Madrid. The authors gratefully acknowledge the aforementioned financial support., Peer reviewed