Pasar al contenido principal

OBTENCION DE NANOESTRUCTURAS BASADAS EN CELULOSA CON PROPIEDADES BIOACTIVAS PARA SU APLICACION EN EL EMBALAJE (SUS-BIO-FILM)

PID2022-141965OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting enzymatic hydrolysis of steam-pretreated softwood by laccase and endo-β-mannanase enzymes from Streptomyces ipomoeae CECT 3341

  • Eugenio, María E.
  • Domínguez, Gabriela
  • Molina-Guijarro, José M.
  • Hernández, Manuel
  • Arias, María Enriqueta
  • Ibarra, David
23 Pág., Ligninases and hemicellulases are crucial as accessory enzymes to increase the enzymatic hydrolysis of lignocellulose, boosting sugars production from which biofuels and bioproducts could be obtained. In order to find new sources of these accessory enzymes, this study evaluates the potential of laccase and mannanase enzymes from Streptomyces ipomoeae for improving the conventional hydrolysis with commercial cellulases of steam-pretreated softwood. For that, different laccase treatment and mannanase supplementation strategies were performed. S. ipomoeae laccase increased both glucose and xylose production (17.8% and 9.3%, respectively), which was attributed to a removal of phenols of 29%. Moreover, the combination of laccase and alkaline extraction produced a lignin reduction of 16.2%, improving the glucose and xylose production by almost 41.3% and 44.9%, respectively. On the other hand, the supplementation of S. ipomoeae mannanase to the hydrolysis 24 h before the addition of cellulases increased the glucose (18.4%), xylose (12.3%), and mannose (47.2%) production., This research was funded by Comunidad de Madrid via Project SUSTEC‐CM S2018/EMT‐ 4348; Spanish MCINN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” via Project RTI2018‐096080‐B‐C22; and Spanish MCINN via Projects TED2021‐132122B‐C21 (LIGNUCELL) and PID2022-141965OB-C21 (SUS-BIO-FILM). María E. Eugenio and David Ibarra are grateful for the support of the Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy (SusPlast-CSIC), Madrid, Spain and Interdisciplinary Platform for Sustainability and Circular Economy (SosEcoCir-CSIC), Madrid, Spain; and Interdisciplinary Platform Horizonte Verde (CSIC), Madrid, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of Lignin Residues from Bioethanol Production of Olive Stones as Green Chemical Thickener of Epoxidized Linseed Oil

  • Cortés-Triviño, Esperanza
  • Valencia, Concepción
  • Franco, José Mariano
  • Oliva, José Miguel
  • Manzanares, Paloma
  • Eugenio, María E.
  • Ibarra, David
18 Pág., This work focused on the characterization of lignin residues from bioethanol production of olive stones (OS) and the use of these residues to chemically thicken epoxidized linseed oil (ELO). OS were processed by an acid/steam explosion pretreatment, followed by pre-saccharification, using different enzyme dosages, and simultaneous saccharification and fermentation. The chemical composition of the OS lignin residues was analysed, revealing a high lignin content (66.6–69.5%), and lower quantities of glucan (17.4–19.3%) and xylan (2.8–2.9%). Whereas, the structural properties of OS lignin residues were characterized by Fourier-transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), thermogravimetric analysis and size exclusion chromatography (SEC). OS lignin residues displayed the main inter-unit linkages (β–β′ resinol (51.0–59.0%), followed by β-O-4′ alkyl aryl ethers (27.0–35.2%) and β-5′ phenylcoumaran (11.4–13.2%) substructures), high molecular weights (22,000–25900 Da), low S/G ratios (1.2–1.5) and phenolic groups content (48–55 mg GAE/g lignin). Moreover, OS lignin residues were dispersed in ELO to obtain thickened formulations, which were characterized by FTIR and NMR. Oil thickening was achieved by promoting the chemical crosslinking between lignocellulose hydroxyl groups and ELO epoxy groups, enabling the compatibilization of both components. Up to tenfold viscosity increment of the resulting thickened formulations in relation to ELO’s viscosity was observed. Besides, thickened formulations exhibited viscoelastic properties, evincing oil structuration to some extent. Graphical Abstract: (Figure presented.), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work is collaborative research which is part of different projects: coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) and project PID2022-141965OB-C21 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”, TED 2021-132122B-C1 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European UnionNextGenerationEU/PRTR”, ENE2017-85819-C2-2-R funded by MINECO, and SUSTEC-CM S2018/EMT-4348 project funded by Comunidad de Madrid. The authors gratefully acknowledge the aforementioned financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioactive nanocellulose films by incorporation of enzymatically polymerized lignin nanoparticles

  • García-Fuentevilla, Luisa
  • Martín-Sampedro, Raquel
  • Darder, Margarita
  • Ibarra, David
  • Eugenio, María E.
In the search of new bioactive and biobased films, the use of lignin nanoparticles (LNP) and cellulose nanofibers (CNF) has gained potential relevance in the last years. In this context, an enzymatic and environmentally friendly pretreatment with laccases has been proposed in this work to modify the properties of the developed cellulose-lignin nanocomposite films. Thus, the laccase treatment successfully polymerized kraft lignin as indicated by the increase in weight average molecular weight (from 3621 to 5681 Da) and the reduction in phenolic content (from 552 to 324 mg GAE/g lignin). Moreover, this polymerization also caused a significant reduction in the size of the resulting LNP (6.8 ± 2.4 nm) compared to those obtained from untreated lignin (62 ± 22 nm). The incorporation of both untreated and treated LNP conferred antioxidant, antibacterial and UV-shielding capabilities to the final LNP-CNF films, observing higher antioxidant and UV-shielding values with polymerized LNP probably due to its tiny size and conjugated functional groups, respectively. Furthermore, films with 5 % LNP also showed better thermal stability, elongation at break, water vapor permeability and transparency, compared to CNF control films., This work was supported by the MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, [project PID2022-141965OB-C21 and PID2022-137889OB-I00]; MCIN/AEI/10.13039/501100011033 and the “European Union Next Generation EU/PRTR” [project TED 2021-132122B-C1]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-assisted green solvents extraction as a sustainable approach to obtain antioxidants and enhance advanced bioethanol production from steam-exploded biomass

  • Cañadas, Raquel
  • Martín-Sampedro, Raquel
  • González-Miquel, María
  • González, Emilio J.
  • Ballesteros, Ignacio
  • Eugenio, María E.
  • Ibarra, David
Achieving sustainable and economically viable bioethanol production from lignocellulosic biomass relies on efficient pre-treatments, e.g., steam explosion. However, these can generate inhibitors that hinder enzymatic hydrolysis and fermentation stages. To overcome this challenge, we explored an integrated approach combining physical extraction (microwave irradiation) with chemical solvents (green solvents) to enhance bioethanol production from steam-exploded eucalypt wood. Green solvents, such as bio-based and eutectic solvents, were essential for extracting phenolic inhibitors that can be revalorized as antioxidants. Notably, ethyl lactate emerged as the most effective extraction agent in a microwave-assisted extraction process at 100 °C for 6 min, followed by a distilled water washing step. A certain delignification effect was also observed. After separate hydrolysis and fermentation process of the extracted sample, a maximum bioethanol production of 15.7 ± 0.3 g/L was achieved compared to 12.7 ± 0.0 g/L for the control sample. In addition, the samples were characterised through chemical composition and FTIR analysis. Overall, this study marks a significant advancement in producing environmentally friendly biofuels by integrating innovative extraction techniques with green solvents. This opens new possibilities for second-generation biofuels. At the same time, valuable by-products like antioxidants contribute to the broader goal of making bioethanol production economically feasible., This work is collaborative research which is part of different projects: coordinated research projects (PID2022-141965OB-C21 and PID2022-141965OB-C22) funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”, TED 2021-132122B-C1 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the “European UnionNextGenerationEU/PRTR”; as well as the SUSTEC-CM S2018/EMT-4348 project and the AgroSUSTEC-CM TEC-2024/BIO-27 project funded by Comunidad de Madrid. The authors gratefully acknowledge the aforementioned financial support Raquel Martín-Sampedro, María E. Eugenio and David Ibarra are grateful for the support of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy-Spanish National Research Council (SusPlast-CSIC), Madrid, Spain and Interdisciplinary Platform for Sustainability and Circular Economy (SosEcoCir-CSIC). The authors from UPM acknowledge Comunidad Autónoma de Madrid (Spain) for funding under the Multiannual Agreement with Universidad Politécnica de Madrid in the line Excellence Programme for University Professors, in the context of the V PRICIT (Regional Programme of Research and Technological Innovation)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applicability of a laccase from the eucalypt wood endophytic fungus Hormonema sp. CECT-13092 for advanced bioethanol production

  • García-Fuentevilla, Luisa
  • Eugenio, María E.
  • Martín-Sampedro, Raquel
  • Ibarra, David
This work studies, for the first time, the potential of a laccase from the endophyte fungus Hormonema sp. CECT-13092, compared to a laccase from the saprophyte fungus Trametes villosa, for delignification and detoxification of steam-exploded eucalypt to improve subsequent bioethanol production. Regarding laccase delignification, the use of Hormonema sp. and T. villosa laccases did not show evidence of delignification of steam-exploded material, and rather low glucose and xylose recoveries were obtained during saccharification assays of laccase-treated samples compared with their respective controls. With regard to laccase detoxification, the reduction of the total phenolic inhibitors content presents in steam-exploded material by both laccases (phenols removal of 47 % and 60 % by Hormonema sp. and T. villosa laccases, respectively), triggered the fermentation by Saccharomyces cerevisiae of laccase-treated samples when 0.2 g L-1 of inoculum was used during a simultaneous saccharification and fermentation (SSF) process. Moreover, when the inoculum was increased from 0.2 to 1.0 g L-1, both laccases shortened the yeast lag phase during the SSF process. Then, faster glucose consumption and ethanol production rates (ethanol productivity values of 0.25 and 0.28 g L-1 h-1 for T. villosa and Hormonema sp. laccases, respectively, compared to 0.02 g L-1 h-1 for control samples) were noticed. This fact proves the high potential of this new entophytic fungal laccase for bioethanol production enhancement, comparable to commercial laccases., The authors wish to thank the projects PID2022–141965OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and TED 2021-132122B-C1, funded by MCIN/AEI/10.13039/501100011033 and by the “European UnionNextGenerationEU/PRTR”, to support this study. The project TEC-2024/BIO-27 (AgroSUSTEC-CM), funded by Comunidad de Madrid, is also grateful., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A sustainable valorization approach of Kraft black liquor from Robinia pseudoacacia L.: lignin precipitation followed by green solvents extraction of phenols from delignified liquor

  • Sánchez-Monedero, A.
  • Cañadas, Raquel
  • Martín-Sampedro, Raquel
  • Santos, José Ignacio
  • Eugenio, María E.
  • Ibarra, David
13 páginas.- 6 figuras.- 2 tablas..- referencias.- Supplementary data to this article can be found online at https://doi.org/10.1016/j.jenvman.2025.126515, Kraft black liquor is considered a renewable feedstock for value-added compounds such as lignin and phenols, which should be valorized rather than incinerated for energy production. Herein, Robinia pseudoacacia L. was subjected to Kraft pulping and the resulting black liquor was recovered for lignin and phenols extraction. The liquor was acidified to isolate lignin and the residual aqueous phase from lignin precipitation was subjected to liquid-liquid extraction. For latter, two bio-based solvents (2-methyltetrahydrofuran (2-MeTHF) and cyclopentyl methyl ether (CPME)) and ethyl acetate (EA) as a conventional organic solvent were used. The chemical composition of lignin was evaluated by standard method, whereas its structural characteristics were analyzed by Nuclear Magnetic Resonance (NMR) and Fourier-Transform Infrared (FTIR) spectroscopy, and Size Exclusion Chromatography (SEC). The phenols extraction efficiency of solvents was determined by UV-Vis spectrometry, using Folin-Ciocalteu assay, and subsequently, phenols were tentatively identified and quantified by HPLC-DAD chromatography. The antioxidant activity of lignin and phenolic extracts were characterized by DPPH scavenging tests. Recovered lignin (85 %) displayed a significant degradation of lateral chains and, therefore, a high phenolic content and low molecular weight. Based on these characteristics, a lignin with antioxidant activity was recovered. Concerning phenols extraction from delignified liquor, 2-MeTHF displayed the highest extraction capacity (78 %), followed by EA (52 %) and CPME (33 %). The organic extracts showed antioxidant activity, following a comparable tendency to that of the total phenolic content values (2-MeTHF > EA > CPME). Among the different phenols identified, highlights the flavonoids dihydrorobinetin and robinetin, with potential to be employed in different sectors., The authors wish to thank the project TED 2021-132122B-C1 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union-NextGenerationEU/PRTR" and the project PID2022-141965OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" to support this study. AgroSUSTEC-CM (TEC-2024/BIO-27) project, funded by Comunidad de Madrid, is also grateful. Authors are also grateful for the support of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast-CSIC), Madrid, Spain; Interdisciplinary Platform for Sustainability and Circular Economy (SosEcoCir-CSIC), Madrid, Spain; Interdisciplinary Platform Horizonte Verde (CSIC), Madrid, Spain; and RED LIGNOCEL (RED2024-153800-T) funded by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulated Optoelectronic Properties of MOF/CNF Bionanocomposite Films for Bacterial Growth Control under Visible Light

  • Guerrero, Joab D.
  • Martín-Sampedro, Raquel
  • Cuadrado, Ramón
  • Llano, Iván
  • García-Frutos, Eva M.
  • Aranda, Pilar
  • Ibarra, David
  • Eugenio, María E.
  • Vázquez, Luis
  • Pérez-Carvajal, Javier
  • Darder, Margarita
The present work reports an experimental and theoretical investigation of tuning the optoelectronic properties of MIL-125-NH2 nanoparticles by grafting aromatic molecules. The postsynthetic modification of the MOF MIL-125-NH2 with 3,4-dihydroxybenzaldehyde (DBA) resulted in a 23% reduction in the bandgap energy, from 2.71 to 2.08 eV, while increasing the absorbance throughout the visible region of the spectrum, which could be attributed to stabilization due to enol-imine/keto-enamine tautomerism, as supported by DFT theoretical calculations. Pristine and grafted MOFs were assembled into cellulose nanofibers (CNF) for the preparation of functional CNF-based bionanocomposites. The mechanical properties of the films improved, with Young’s modulus increasing from 1.3 GPa in CNF to 7.5 GPa in the film with 20% MOF loading. The potential of the developed materials for photocatalytic antimicrobial therapy was evaluated against Staphylococcus aureus (S. aureus). In vitro tests showed that both bionanocomposite films with pristine and DBA-modified MOF remarkably reduced bacterial growth due to the photocatalytic action of the MOF under visible light. The inhibition values were around 58% and 72%, respectively, while minimal inhibition was observed under dark conditions. These initial results support the potential use of the developed bionanocomposite films as wound dressings., The authors acknowledge financial support from projects funded by AEI, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00, PID2022-137889OB-I00, and PID2022-141965OB-C21) and “ERDF A way of making Europe” (EU, projects PID2022-137889OB-I00 and PID2022-141965OB-C21), and projects TED2021-131223B–I00 and TED2021-132122B–C1 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”. J.P.-C. also acknowledges financial support from RYC2022-037460-I Ramon y Cajal contract, funded by AEI (MCIN/AEI/10.13039/501100011033). R.C. and J.P.-C. thankfully acknowledge RES resources provided by the Barcelona Supercomputing Center (BSC) in MareNostrum5 GPP to QHS-2024-2-0024. J.D.G. acknowledges the PhD fellowship CSIC PRE23_ICMM_111 (AEI, Spain). We also thank the Interdisciplinary Platforms for Sustainable Plastics towards a Circular Economy (SusPlast) and for Sustainability and Circular Economy (SosEcoCir) of the Spanish National Research Council (CSIC). The authors also acknowledge Dr A. Jacas for the design and construction of the irradiation device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The use of kraft lignin to enhance nanocellulose film properties

  • Martín-Sampedro, Raquel
  • Ovejero-Pérez, Antonio
  • Oliet, Mercedes
  • Alonso, Virginia
  • Rodríguez, Francisco
  • Ibarra, David
  • Eugenio, María E.
Artículo presentado en el Congreso Faraday Discussion on "Frontiers in physical chemistry for lignin valorisation" celebrado en Londres del 10 al 12 de septiembre de 2025, organizado por la Royal Society of Chemistry (RSC)., The urgent need to replace petroleum-based plastics with renewable and biodegradable alternatives has driven interest in biopolymers from lignocellulosic biomass as sustainable solutions. Among these, nanocellulose stands out as a versatile product capable of forming strong, transparent, and flexible films. However, these films lack active properties like antioxidant capacity and UV-shielding, essential for applications such as food packaging. To address this, incorporating lignin, a byproduct of lignocellulosic biorefineries and pulp industries, offers a promising route to enhance the functionality of nanocellulose films. This study aimed to enhance the properties of nanocellulose films by incorporating isolated kraft lignin. Nanocellulose (TOCNF) was produced from Eucalyptus globulus bleached kraft pulp using TEMPO-mediated oxidation followed by microfluidization. Kraft lignin was isolated from black liquor via acid precipitation. Two protocols for adding lignin to the TOCNF suspension were evaluated: one involved mixing TOCNF (0.3%) with a 0.3% aqueous lignin suspension, while the other used lignin diluted in an acetone:water (9:1) solution to form lignin nanoparticles (LNP) through solvent shift while mixing with the aqueous TOCNF suspension also at the 0.3% concentration. Films were prepared with lignin concentrations of 2.5%, 5%, 10%, and 20% for each protocol. The films were characterized using FTIR spectroscopy and SEM microscopy. Moreover, their antioxidant and antimicrobial capacities as well as their water vapor permeability (WVP) were assessed. Incorporating lignin into the TOCNF suspension enhanced the barrier properties of the films, particularly when lignin was introduced as LNP, achieving a WVP reduction from 1.6·10⁻¹¹ gm⁻¹s⁻¹Pa⁻¹ for pure TOCNF to 1.3–0.9·10⁻¹¹ gm⁻¹s⁻¹Pa⁻¹ for TOCNF with LNP. However, adding bulk lignin at a high concentration (20%) negatively affected WVP, increasing it to 2.0·10⁻¹¹ gm⁻¹s⁻¹Pa⁻¹. Antioxidant capacity correlated with lignin content, showing greater enhancement when lignin was present as nanoparticles (34.7 mg Trolox equivalent/g film at 20% LNP) compared to bulk lignin (26.4 mg Trolox equivalent/g film at 20%). Regarding antimicrobial capacity, the same tendency was observed, showing a LogR of 4.99 when bulk lignin was used at 20% compared to LogR 7.94 when LNP was employed at 20%, both against Staphylococcus aureus.These results indicate that forming LNP in situ within the TOCNF suspension is a more effective approach to optimize the properties of nanocellulose films., The pressing need to replace petroleum-based plastics with renewable and biodegradable alternatives has sparked growing interest in biopolymers derived from lignocellulosic biomass as sustainable solutions. Among these, nanocellulose stands out as a versatile product capable of forming strong, transparent, and flexible films. However, these films lack active properties like antioxidant, antibacterial and UV-shielding capacity, essential for applications such as food packaging. To address this, incorporating lignin, a byproduct of lignocellulosic biorefineries, offers a promising route to enhance the functionality of nanocellulose films. In line with this idea, this work studies the incorporation of kraft lignin into nanocellulose films by two different protocols: the first protocol involves directly mixing a cellulose nanofiber (CNF) suspension with an aqueous lignin suspension; the second protocol uses lignin dissolved in acetone : water (9 : 1) which is transformed into lignin nanoparticles (LNPs) via solvent shifting when mixed with the aqueous CNF suspension. The resulting suspensions of CNFs and lignin were subsequently used to produce casting films. It was found that incorporating lignin into the CNF film not only conferred UV-shielding capacity, but also enhanced barrier properties without compromising the mechanical properties, particularly when lignin was introduced as LNPs (even at 10–20% LNP content). However, adding bulk lignin at a high concentration (20%) negatively affected water vapor permeability and mechanical properties. Antioxidant and antibacterial capacities correlated with lignin content, showing greater enhancement when lignin was present as nanoparticles compared to bulk lignin. These results indicate that forming LNPs in situ within the CNF suspension is a more effective approach to optimize the properties of nanocellulose films. Thus, the obtained films presented good active properties with mechanical properties comparable to those of traditional plastics, but significantly lower barrier properties., This work was supported by the MICIN/AEI/10.13039/501100011033 (Spain) and “ERDF A way of making Europe” [PID2022-141965OB-C21]; the MCIN/AEI/10.13039/501100011033 and the “European Union Next Generation EU/PRTR” [TED 2021-132122B-C21]; and the Comunidad de Madrid (Spain) [SUSTEC-CM S2018/EMT-4348 and TEC2024-BIO-27]. The authors are also grateful for the support of the following Interdisciplinary Platforms: Sustainable Plastics towards a Circular Economy (SusPlast-CSIC), Sustainability and Circular Economy (SosEcoCir-CSIC) and Horizonte Verde (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into structure and bioactive potential of solvent-extracted lignins from enzymatic hydrolysis residues

  • Eugenio, María E.
  • García-Fuentevilla, Luisa
  • Chamizo, Lucía
  • Martín-Sampedro, Raquel
  • Santos, José I.
  • Ibarra, David
To enhance the competitiveness of biorefineries based on sugars production, the interest in the valorization of hydrolysis lignin residue is becoming increasingly essential. Nevertheless, hydrolysis lignin residue (Hyd-Lig) faces limitations in its valorization—for instance, as bioactive agent due to different factors, including poor solubility, carbohydrates contamination, and chemical and structural variability. In this study, alkaline and organosolv (acetone, dioxane or methanol) approaches were evaluated for extraction of lignin from a hydrolysis residue generated during steam explosion and subsequent saccharification of poplar. The extracted lignins were characterized according to purity, chemical, and structural features by analytical standard methods and FTIR, SEC, 13C and 1H–13C NMR. Antioxidant (Trolox Equivalent Antioxidant Capacity, TEAC) and antibacterial (against Staphylococcus aureus) properties were also evaluated. The extracted lignin recovery yield using alkaline conditions (Alk-Lig) was 39.1 %, whereas using acetone (Ace-Lig), dioxane (Dio-Lig), and methanol (Met-Lig) were 24.1 %, 19.1 % and 13.1 %, respectively. Compared to Hyd-Lig, with a total lignin content of 63.9 %, extracted lignins displayed a higher purity (total lignin of 93.9–95.9 %). In addition, extracted lignins displayed a removal of lateral chains (aryl-β ether) and, therefore presented a higher phenolic content (around of 210–238 mg GAE/g lignin) compared to Hyd-Lig sample (42 mg GAE/g lignin). Then, the solubility of extracted lignins was improved, and higher antioxidant (TEAC values between 0.055 and 0.155) and antibacterial activities (Log R values between 0.5 and 1.2), compared to Hyd-Lig sample (TEAC and Log R of 0.022 and 0.02, respectively), were obtained. This work shows the necessity of extracting lignin from hydrolysis residues to enhance its applicability as bioactive agent and enable its potential valorization., The authors wish to thank the project TED 2021–132122B-C21 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR” and the project PID2022–141965OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” to support this study. AgroSUSTEC-CM (TEC-2024/BIO-27) project, funded by Comunidad de Madrid, is also grateful. Authors are also grateful for the support of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast-CSIC), Madrid, Spain; Interdisciplinary Platform for Sustainability and Circular Economy (SosEcoCir-CSIC), Madrid, Spain; Interdisciplinary Platform Horizonte Verde (CSIC), Madrid, Spain; and RED LIGNOCEL (RED2024–153800-T) funded by MICIU/AEI/10.13039/501100011033. The contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting interaction, exchange of knowledge and collaborations in the field of lignin valorization is also gratefully acknowledged., Peer reviewed