Pasar al contenido principal

NANOARQUITECTURAS HIBRIDAS COMPLEJAS PARA LA MULTIFUNCIONALIDAD Y SOLUCIONES SOSTENIBLES

PID2022-137889OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanism of the Low-Temperature Organic Removal from Imidazolium-Containing Zeolites by Ozone Treatment: Fluoride Retention in Double-4-Rings

  • Rei Gao, Zihao
  • Márquez-Álvarez, Carlos
  • Rodríguez-Gómez Balestra, Salvador
  • Yu, Huajian
  • Camblor, Miguel A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] For zeolites synthesized using imidazolium cations, the organic matter can be extracted at very low temperatures (100 °C) using ozone. This is possible for zeolites with 12-ring or larger pores but requires higher temperatures in medium-pore zeolites. The first chemical events in this process occur fast, even at room temperature, and imply the loss of aromaticity likely by the formation of an adduct between ozone and the imidazole ring through carbons C4 and C5. Subsequent rupture of the imidazole ring provides smaller and more flexible fragments that can desorb more readily. This process has been studied experimentally, mainly through infrared spectroscopy, and theoretically by density functional theory. Amazingly, fluoride anions occluded in the small double-four-ring units (d4r) during the synthesis remain inside the cage throughout the whole process when the temperature is not too high (¿150 °C). However, fluoride in larger cages in MFI ends up bonded to silicon in penta or hexacoordinated units, likely out of the cages, after ozone treatment at 150 °C. For several germanosilicate zeolites, the process allows their subsequent degermanation to yield stable high-silica zeolites. Quaternary ammonium cations require harsher conditions that eventually also extract fluoride from zeolite cages, including the d4r unit., Grants PID2019-105479RB-I00, PID2022-138481NB-I00, PID2022-137889OB-I00, TED2021-131223B-I00, PID2021-128141OB-C22, and FJC2018-035697-I were funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. M.A.C. thanks J. C. van der Waals for sharing unpublished information on his pioneering work. H.Y. is grateful to the China Scholarship Council (CSC) for a Ph.D. fellowship. S.R.G.B. also thanks the Consejeria de Universidades, Investigacion e Innovacion, Junta de Andalucia, for the POSTDOC_21_00069 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stable Silica-Based Zeolites with Three-Dimensional Systems of Extra-Large Pores

  • Yu, Huajian
  • Gao, Zihao Rei
  • Camblor, Miguel A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] Zeolites are microporous crystalline materials that find a very wide range of applications, which, however, are limited by the size and dimensionality of their pores. Stable silica zeolites with a three-dimensional (3D) system of extra-large pores (ELP, i.e., pores with minimum windows along the diffusion path consisting of more than 12 SiO4/2 tetrahedra, 12R) are in demand for processing larger molecules than zeolites can currently handle. However, they have challenged worldwide synthetic capabilities for more than eight decades. In this review we first present a brief history of the discovery of ELP zeolites. Next, we show that earlier successes of zeolites with 3D ELP were not actually zeolites, but rather interrupted structures with, in addition, a composition that severely detracted from their stability. Finally, we present three new fully connected stable silica-based 3D ELP zeolites ZEO-1, ZEO-3 and ZEO-5, discuss their preparation methods and stability as well as the clear advantage of their increased porosity in catalysis and adsorption processes involving large molecules. We will discuss peculiar characteristics of their preparation and present two new reaction types giving rise to zeolites (1D-to-3D topotactic condensation and interchain expansion), highlighting how new synthesis methods can provide materials that would otherwise be unfeasible., Financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, PID2021-128141OB-C22, TED2021-131223B-I00, MCIN/AEI/10.13039/501100011033), and Generalitat Valenciana (PROMETEO CIPROM/2021/007) are gratefully acknowledged. H.Y. is grateful to the China Scholarship Council for a PhD grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoarchitectonics of lignin-sepiolite bionanocomposite foams for application in environmental remediation

  • Jiménez-López, Brenda Azharel
  • Martín-Sampedro, Raquel
  • Leyva-Ramos, Roberto
  • Darder, Margarita
  • Aranda, Pilar
10 Pág., Innovative bionanocomposite foams based on precipitated Kraft lignin (Lig) and Kraft black liquor (BL) loaded with sepiolite (Sep) were prepared. BL/Sep bionanocomposites were synthesized by emulsion templating and Lig/Sep bionanocomposites were prepared by freeze-drying, resulting in stable and rigid foams. BL/Sep bionanocomposites displayed a closed cell structure, a specific area between 19 and 35 m2/g and macropores of varying sizes. The porosity in this technique is achieved by the mechanical agitation of the emulsion. On the other hand, freeze-dried Lig/Sep bionanocomposites showed open cell morphology with surface areas ranging from 1 to 4 m2/g and uniform macropores due to the ice-templating process. The presence of sepiolite in both types of bionanocomposite foams improved their stiffness, with Young's moduli ranging from 0.21 to 9.6 MPa. The capacity of the foams to adsorb metals, drugs and dyes was evaluated and it was found that the synthesized bionanocomposite foams exhibiting similar adsorption capacities as that reported for lignin. Sepiolite significantly improved the adsorption of Cu(II), Cd(II), acetaminophen (ACT), and methylene blue (MB) in BL/Sep bionanocomposites. Meanwhile, the Lig/Sep bionanocomposites demonstrated superior adsorption capacities for the Cr(VI) anion and aromatic ring compounds, including ACT and MB. In this respect, these lignin-sepiolite foams can be considered as promising materials for the removal of pollutants in aqueous solution., The authors thank the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00 and PID2022-137889OB-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00). B.A.J.L. thanks the CONAHCYT (México) for the Beca mixta program, scholarship No. 291276. We also thank the Interdisciplinary Platforms for Sustainable Plastics towards a Circular Economy (SusPlast), and for Sustainability and Circular Economy (SosEcoCir) of The Spanish National Research Council (CSIC). Finally, authors gratefully acknowledge the contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting the interaction, exchange of knowledge and collaborations in the field of lignin valorization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silica–Ti3C2Tx MXene Nanoarchitectures with Simultaneous Adsorption and Photothermal Properties

  • Ruiz-Hitzky, Eduardo
  • Ounis, Mabrouka
  • Younes, Mohamed Kadri
  • Pérez-Carvajal, Javier
Layered Ti3C2Tx MXene has been successfully intercalated and exfoliated with the simultaneous generation of a 3D silica network by treating its cationic surfactant intercalation compound (MXene-CTAB) with an alkoxysilane (TMOS), resulting in a MXene–silica nanoarchitecture, which has high porosity and specific surface area, together with the intrinsic properties of MXene (e.g., photothermal response). The ability of these innovative MXene silica materials to induce thermal activation reactions of previously adsorbed compounds is demonstrated here using NIR laser irradiation. For this purpose, the pinacol rearrangement reaction has been selected as a first model example, testing the effectiveness of NIR laser-assisted photothermal irradiation in these processes. This work shows that Ti3C2Tx-based nanoarchitectures open new avenues for applications that rely on the combined properties inherent to their integrated nanocomponents, which could be extended to the broader MXene family., The authors thank the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00 and PID2022-137889OB-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00). J.P.C. acknowledges financial support from RYC2022-037460-I Ramon y Cajal contract project funded by MCIN/AEI/10.13039/501100011033 and FSE+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure, and Phase Transformations of HPM-3: A Layered Precursor of the Neutral Aluminophosphate with JSN Topology

  • Yu, Huajian
  • Kim, Eun Jeong
  • Gao, Zihao Rei
  • Lee, Jeong Hwan
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Li, Jian
  • Márquez Álvarez, Carlos
  • Marler, Bernd
  • Hong, Suk Bong
  • Camblor, Miguel Ángel
The structure of HPM-3, a layered aluminophosphate prepared using 1,2,3-trimethylimidazolium (123TMI) as an organic structure-directing agent by the fluoride route, has been solved by continuous rotation electron diffraction (cRED), and Rietveld refined against synchrotron powder X-ray diffraction data. Charge balance of the occluded cation is achieved through F- anions and dangling Al(OP)3OH groups. Half of the Al is pentacoordinated in negatively charged Al(OP)4-F-Al(OP)4 pairs. The layers in HPM-3, denoted as jsn, are observed in the fully connected metalloaluminophosphate molecular sieves with JSN topology. Thus, HPM-3 can be a precursor to a JSN metal-free aluminophosphate if a topotactic condensation can be reached, which proved to be difficult but feasible. Treatments under different conditions resulted in a number of known (PST-27 and AlPO4-5 by a disruptive transformation) or new phases (through mild thermal treatments). Among the latter, a layered phase with a shorter interlayer space, denoted as HPM-3S, contains half the amount of organic as HPM-3. This is afforded by the capability of 123TMI compounds to sublimate at relatively low temperatures. HPM-3S still contains the same jsn layers. Therefore, the transformation of HPM-3 into HPM-3S is topotactic but without reaching condensation. Among the phases appearing under calcination conditions at relatively low temperature (<350 °C), we observed solids compatible with the JSN topology, but with poor crystallinity. This is attributed to a wrong alignment in HPM-3 of the dangling Al(OP)3OH and P(OAl)3═O that should connect adjacent layers in a topotactic condensation, which favors 1-dimensional stacking disorder by random shifts of layers during the thermal treatments. However, detemplation at a much lower temperature (175 °C) using O3 finally afforded an aluminophosphate molecular sieve with JSN topology with only moderate stacking disorder. This is just the third reported 2D-to-3D topotactic condensations in aluminophosphates. © 2024 American Chemical Society., Financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, TED2021-131223B–I00, PID2022-138481NB-I00, MCIN/AEI/10.13039/501100011033), the National Creative Research Initiative Program (2021R1A3A3088711) through the National Research Foundation of Korea, are gratefully acknowledged. We thank CSIC and MCIN for provision of synchrotron radiation facilities at the beamline BM25-SpLine at the ESRF (Grenoble, France). Continuous rotation electron diffraction data were collected at the Electron Microscopy Center, Department of Materials and Environmental Chemistry at Stockholm University with the supports of the Knut and Alice Wallenberg Foundation (grants 2003-0198 & 2012-0112) through the Fe -TEM and the 3DEM-NATUR Project, respectively. H.Y. is grateful to the China Scholarship Council for a PhD grant. S.R.G.B. acknowledges grant RYC2022-036070-I funded by MICIU/AEI/10.13039/501100011033 and by “ESF+”. Authors would like to thank the computing time provided by the Servicio de Supercomputación de la Universidad de Granada., Supporting information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioactive nanocellulose films by incorporation of enzymatically polymerized lignin nanoparticles

  • García-Fuentevilla, Luisa
  • Martín-Sampedro, Raquel
  • Darder, Margarita
  • Ibarra, David
  • Eugenio, María E.
In the search of new bioactive and biobased films, the use of lignin nanoparticles (LNP) and cellulose nanofibers (CNF) has gained potential relevance in the last years. In this context, an enzymatic and environmentally friendly pretreatment with laccases has been proposed in this work to modify the properties of the developed cellulose-lignin nanocomposite films. Thus, the laccase treatment successfully polymerized kraft lignin as indicated by the increase in weight average molecular weight (from 3621 to 5681 Da) and the reduction in phenolic content (from 552 to 324 mg GAE/g lignin). Moreover, this polymerization also caused a significant reduction in the size of the resulting LNP (6.8 ± 2.4 nm) compared to those obtained from untreated lignin (62 ± 22 nm). The incorporation of both untreated and treated LNP conferred antioxidant, antibacterial and UV-shielding capabilities to the final LNP-CNF films, observing higher antioxidant and UV-shielding values with polymerized LNP probably due to its tiny size and conjugated functional groups, respectively. Furthermore, films with 5 % LNP also showed better thermal stability, elongation at break, water vapor permeability and transparency, compared to CNF control films., This work was supported by the MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, [project PID2022-141965OB-C21 and PID2022-137889OB-I00]; MCIN/AEI/10.13039/501100011033 and the “European Union Next Generation EU/PRTR” [project TED 2021-132122B-C1]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulated Optoelectronic Properties of MOF/CNF Bionanocomposite Films for Bacterial Growth Control under Visible Light

  • Guerrero, Joab D.
  • Martín-Sampedro, Raquel
  • Cuadrado, Ramón
  • Llano, Iván
  • García-Frutos, Eva M.
  • Aranda, Pilar
  • Ibarra, David
  • Eugenio, María E.
  • Vázquez, Luis
  • Pérez-Carvajal, Javier
  • Darder, Margarita
The present work reports an experimental and theoretical investigation of tuning the optoelectronic properties of MIL-125-NH2 nanoparticles by grafting aromatic molecules. The postsynthetic modification of the MOF MIL-125-NH2 with 3,4-dihydroxybenzaldehyde (DBA) resulted in a 23% reduction in the bandgap energy, from 2.71 to 2.08 eV, while increasing the absorbance throughout the visible region of the spectrum, which could be attributed to stabilization due to enol-imine/keto-enamine tautomerism, as supported by DFT theoretical calculations. Pristine and grafted MOFs were assembled into cellulose nanofibers (CNF) for the preparation of functional CNF-based bionanocomposites. The mechanical properties of the films improved, with Young’s modulus increasing from 1.3 GPa in CNF to 7.5 GPa in the film with 20% MOF loading. The potential of the developed materials for photocatalytic antimicrobial therapy was evaluated against Staphylococcus aureus (S. aureus). In vitro tests showed that both bionanocomposite films with pristine and DBA-modified MOF remarkably reduced bacterial growth due to the photocatalytic action of the MOF under visible light. The inhibition values were around 58% and 72%, respectively, while minimal inhibition was observed under dark conditions. These initial results support the potential use of the developed bionanocomposite films as wound dressings., The authors acknowledge financial support from projects funded by AEI, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00, PID2022-137889OB-I00, and PID2022-141965OB-C21) and “ERDF A way of making Europe” (EU, projects PID2022-137889OB-I00 and PID2022-141965OB-C21), and projects TED2021-131223B–I00 and TED2021-132122B–C1 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”. J.P.-C. also acknowledges financial support from RYC2022-037460-I Ramon y Cajal contract, funded by AEI (MCIN/AEI/10.13039/501100011033). R.C. and J.P.-C. thankfully acknowledge RES resources provided by the Barcelona Supercomputing Center (BSC) in MareNostrum5 GPP to QHS-2024-2-0024. J.D.G. acknowledges the PhD fellowship CSIC PRE23_ICMM_111 (AEI, Spain). We also thank the Interdisciplinary Platforms for Sustainable Plastics towards a Circular Economy (SusPlast) and for Sustainability and Circular Economy (SosEcoCir) of the Spanish National Research Council (CSIC). The authors also acknowledge Dr A. Jacas for the design and construction of the irradiation device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An overloaded pure silica zeolite ISV synthesized using a phosphonium cation

  • Yu, Huajian
  • Balestra, Salvador R. G.
  • Gao, Zihao Rei
  • Camblor, Miguel Ángel
A pure silica zeolite with ISV structure was synthesized using the tricyclopentylmethylphosphonium (Cp3MP+) cation under fluoride media. Analysis of the organic content in the zeolite suggested the presence of more than four cations per unit cell, while fluoride anions were exclusively located in the four double four-membered rings of the structure. 29Si solid-state NMR demonstrated a significant concentration of Q3 Si species, i.e., S̲i̲(OSi)3(OH), in the structure, which afforded charge balance but contrasted with the most common observation of defect-free pure silica zeolites prepared in fluoride media at near-neutral pH. Calculations showed that improved stability was obtained in an overloaded (i.e., containing more Cp3MP+ than F- and three-channel crossings) defective zeolite. The calculated stabilization of ISV was larger with Cp3MP+ than with the cyclohexyl analog used to produce ZEO-1, a zeolite with an extra-large 3D pore system. Substitution of small amounts of Cp3MP+ by tetraethylammonium stopped crystallization instead of producing ISV/BEC intergrowths, despite calculations on the bare zeolites suggesting improved stability of the intergrowths. This rendered the observed difficulty in obtaining such intergrowths puzzling and likely dependent on a disruption of the host-guest assembly. Compared with prior ISV materials, this zeolite displayed a minimum amount of disorder, which, however, was sufficient to impede proper Rietveld refinement., Financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, TED2021-131223B-I00, MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Synchrotron powder X-ray diffraction data experiments were performed at the Materials Science Powder Diffraction beamline bl04 at the ALBA Spanish Synchrotron with the collaboration of the ALBA staff. H. Y. is grateful to the China Scholarship Council for a PhD grant. S. R. G. B. acknowledges grant RYC2022-036070-I funded by MICIU/AEI/10.13039/501100011033 and by “ESF+”. Authors would like to thank the computing time provided by the Servicio de Supercomputación de la Universidad de Granada., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An imidazolium dication affords a stable UWY-like zeolite and enables a subtle structure direction towards EMM-17

  • Yu, Huajian
  • Lu, Peng
  • Gao, Zihao Rei
  • Blanco Montes, Álvaro
  • Camblor, Miguel Ángel
Zeolites with interconnected medium (10Ring) and large (12R) pores, such as the UWY framework type, hold significant potential for catalysis but may suffer from instability due to a high germanium content required for their synthesis. Addressing this limitation, we report the synthesis of HPM-9, a novel UWY-like germanosilicate zeolite, utilizing 1,1'-(1,8-octanediyl)bis(3-methylimidazolium) (8BMI) as the organic structure-directing agent (OSDA) in fluoride media. HPM-9 achieves significantly lower germanium content (Gef = Ge/(Ge + Si) down to 0.14) compared to the original IM-20 (Gef = 0.3), resulting in markedly improved stability upon calcination and exposure to water. Structural analysis using synchrotron powder X-ray diffraction (SPXRD) suggested disorder and DIFFaX simulations revealed that HPM-9 exhibits minimal stacking faults along the a-axis, corresponding to an intergrowth with a polymorph where double four-membered rings (d4r) are partially replaced by single four-membered rings (s4r), likely driven by the reduced Ge content. Furthermore, decreasing the Ge content further (Gef ≤ 0.05) subtly shifts the structure direction towards EMM-17, a zeolite featuring interconnected 11R and 10R pores. 19F MAS NMR suggests the presence of d4r units in the synthesized EMM-17, and we propose a mechanism where the less stable d4r-containing polymorph C nucleates first, templating the subsequent growth of d4r-free polymorphs A and B by epitaxial intergrowth. Comparative studies with analogous OSDAs (7BMI and 9BMI) confirmed the optimal linker length of 8BMI for directing towards stable UWY structures. The enhanced stability of HPM-9 opens avenues for the practical application of UWY-type zeolites in catalysis., Financial support from the Spanish Ministry of Science and Innovation (PID2022-137889OB-I00, MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Synchrotron powder X-ray diffraction data experiments were performed at the MSPD (Materials Science Powder Diffraction) beamline bl04 at the ALBA Spanish Synchrotron with the collaboration of the ALBA staff, and we gratefully thank Dr Alexander Missyul. H. Y. and P. L. are grateful to the China Scholarship Council for a PhD grant and a joint PhD research, respectively. P. L. acknowledges the support by Qingdao New Energy Shandong Laboratory of International Cooperation Project (QNESL ICP 202305)., Data for this article, including PXRD, SPXRD, DIFFaX simulated PXRD and multinuclear MAS NMR are available at DIGITAL.CSIC at https://hdl.handle.net/10261/390152, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Direct hydrothermal synthesis of zeolites and beyond: Interchain expansion and topotactic condensation

  • Yu, Huajian
Tesis doctoral. (2025). Universidad Autónoma de Madrid. Programa de Doctorado en Química Aplicada. Cuevas Rodríguez, Jaime Fernando; tutor., [EN] For conventional hydrothermal synthesis, organic structure-directing agents (OSDA, see below), type and amount of T atoms (i.e., atoms participate as tetrahedra in the zeolite framework), HF contents, water contents, crystallization temperature and time have been investigated in silicates, germanosilicates, aluminosilicates and aluminophosphates syntheses. We have discovered and characterized zeolites HPM-9 (stable low Ge UWY-like structure) and HPM-18 (new structure) by direct synthesis. We also obtained three zeolite precursors (HPM-3, HPM-22 and HPM-23) that give rise to three zeolites (JSN, MTF and HEU, respectively) by topotactic condensation. We studied systematically the calcination parameters after the hydrothermal synthesis, including various temperatures and durations under two types of calcination (in air and N2), as well as a combination of ozone treatment followed by N2 calcination for HPM-3 topotactic condensation. These approaches were applied not only for detemplation but also to promote topotactic condensation. By Interchain expansion, we synthesized two interrupted zeolites ZEO-4A and ZEO-4B using two different silane reagents to silylate and connect ZEO-2 chain precursors and obtained fullyconnected 3D extra-large pore zeolite ZEO-5 (HZF) by topotactic condensation of ZEO-4A and ZEO-4B., [ES] Para la síntesis hidrotérmica convencional, se han investigado los agentes orgánicos directores de estructura (OSDA, véase más adelante), el tipo y la cantidad de átomos T (es decir, átomos que participan como tetraedros en la estructura de la zeolita), el contenido de HF, el contenido de agua, la temperatura y el tiempo de cristalización en síntesis de silicatos, germanosilicatos, aluminosilicatos y aluminofosfatos. Hemos descubierto y caracterizado las zeolitas HPM-9 (estructura estable de bajo contenido en Ge isomórfica a UWY) y HPM-18 (estructura nueva), obtenidas mediante síntesis directa. También hemos obtenido tres precursores de zeolita (HPM-3, HPM-22 y HPM-23) que dan lugar a tres zeolitas (JSN, MTF y HEU, respectivamente) mediante condensación topotáctica. Estudiamos sistematicamente los parametros de calcinacion despues de la sintesis hidrotermal, incluyendo varias temperaturas y duraciones en dos tipos de calcinación (en aire y N2), así como una combinación de tratamiento con ozono seguido de calcinación con N2 para la condensación topotáctica de HPM-3. Estos enfoques se aplicaron no solo para la destemplación, sino también para promover la condensación topotáctica. Para la expansión entre cadenas, sintetizamos dos zeolitas interrumpidas, ZEO-4A y ZEO-4B, utilizando dos reactivos de silano diferentes sobre el silicato en cadena ZEO-2, y obtuvimos la zeolita ZEO-5 (HZF), de poros extragrandes en 3D y totalmente conectada en 3D, mediante condensación topotáctica de ZEO-4A y ZEO-4B., China Scolarship Council y agencia MCIN/AEI/10.13039/501100011033 (PID2022-137889OB-I00, TED2021-131223B-I00, RYC2022-036070-I, PID2019-105479RB-I00, PID2019-107968RB-I00, PID2021-128141OB-C22) Generalitat Valenciana (PROMETEO CIPROM/2021/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Insights of 7-Azaindole Drugs and Their Intercalation in the Confined Space of Montmorillonite

  • Borrego-Sánchez, Ana
  • García-Frutos, Eva M.
  • Darder, Margarita
  • Sainz-Díaz, C. Ignacio
Two derivatives of the group of 7-azaindoles, 1-benzyl-3-(piperidin-1-ylmethyl)-1H-pyrrolo [2,3-b] pyridine, and 1-benzyl-5-methoxy-3-(piperidin-1-ylmethyl)-1H-pyrrolo [2,3-b] pyridine as mono-oxalate salts are studied in this work as potential neuroprotective drugs for the treatment of Alzheimer’s disease. Previously, we studied the use of a natural montmorillonite clay mineral as a candidate for a drug delivery system, finding that these drugs can be intercalated into the confined interlayer space of montmorillonite and subsequently released in a human medium for therapeutic use. However, some aspects of this study could not be explained. This work has studied this process at the atomic and molecular levels by using the Interface force field (FF). Initially, this methodology was validated in this work, reproducing the experimental crystal structure of these 7-azaindole drugs. Then, this FF was applied to calculate the intercalation of these drugs by cation exchange into montmorillonite according to the experimental results. Our calculations have reproduced this intercalation at the cation exchange capacity at the molecular level, finding that the experimental structure can only be justified with the intercalation of five drug molecules per 4 × 2 × 1 supercell of clay mineral inside the confined interlayer space. In addition, this intercalation does not produce a monolayer disposition postulated initially from experiments. On the contrary, our molecular dynamics simulations show that the intercalated molecules adopt a disordered disposition with a certain tendency to form a bilayer configuration in the confined interlayer space of montmorillonite. Besides, the spectroscopic infrared properties are useful for monitoring the preparation and encapsulation processes of pharmaceutical drugs. Then, these properties were studied experimentally and calculated theoretically. The calculated frequencies of the crystal structure of these 7-azaindole drugs allowed assignments of the experimental FT-IR spectra. This collaborative work with experimental and theoretical research enhances the knowledge for a promising drug delivery system for anti-Alzheimer therapy., A. B.-S. and C. I. S.-D. acknowledge the Andalusian research project P18-RT-3786, DYNALIFE COST action, and the European MSCA-SE-NANOTRIOSTEO 101182658 project. E.M.G.F. and M.D. acknowledge the project PID2022-137889OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER ‘una manera de hacer Europa’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic zeolite synthesis via a fluoride-deficient mixed approach

  • Tan, X.
  • Camblor, Miguel Ángel
  • Hong, S.B.
Here, we present a new fluoride-deficient synthesis approach to beta nanozeolites that results in synergistic effects of mineralizers on the crystallization kinetics, attained at intermediate fluoride and hydroxide concentrations (controlled by the ratio of hydrofluoric acid (HF) to organic structure-directing agent (OSDA) in hydroxide form). This approach represents an improved methodology as compared to the traditional hydroxide and fluoride routes, and it is likely transferable to other zeolites with different framework topologies. The method affords not only improved kinetics but also a control of the crystal size, reaching the nanoscale regime (≤100 nm) and framework defect concentration (≤3.5 per unit cell). Upon loading with Pd species, the resulting Pd/beta catalysts are active for wet methane combustion and their performance is dependent on the concentration of zeolite defects, crystal size, and zeolite Si/Al ratio. The 3.0 wt% Pd catalyst supported on Na+-post-exchanged 500 °C-calcined beta zeolite with a Si/Al ratio of 45 and a crystal size of ca. 75 nm, obtained at a synergistic mixture HF/OSDA ratio of 0.50, is the best among those studied: it shows a light-off temperature of 300 °C, together with excellent catalyst stability (over 90% methane conversion at 350 °C even after 100 h on stream), in the presence of 10% water vapor. This study provides an example where the performance of zeolite-supported metal catalysts can be significantly improved by controlling both the zeolite crystal size and defect concentration. This journal is © The Royal Society of Chemistry, 2025, We acknowledge nancial support from EcoPro HN and the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033 and PID2022-137889OB-I00). We thank D. Jo and S. Cha (KRICT) for Raman and OH-IR measurements and Pohang Accelerator Laboratory (PAL) for XAS beam time at 10C beamline. PAL is supported by MSIP and POSTECH., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unexpected phase selectivity in germanosilicate zeolite synthesis: discovery and structure of HPM-18, a novel stable d4r-containing structure

  • Yu, Huajian
  • Zhang, Zhenghan
  • Li, Jian
  • Balestra, Salvador R.G.
  • Gao, Zihao Rei
  • Camblor, Miguel Ángel
For pure-silica zeolites containing double 4-ring (d4r) units, it is generally expected that zeolite solid solutions can form across the full range of Si–Ge compositions. This is because d4r units, although strained in pure-silica compositions, are stabilized by Ge atoms at their corners. In this work, we show that using 1,3,4-trimethylimidazolium and fluoride as structure-directing agents, the phase selectivity of crystallization shifts from zeolite ITW at pure-silica compositions to a new zeolite, HPM-18, at a low Ge fraction (0.15). HPM-18 contains the same d4r density as ITW and the same T-site fraction belonging to d4r, but is significantly more porous and less dense, making this phase selectivity change unexpected. Interestingly, while the structure of HPM-18 is ordered at a low Ge fraction, increasing the Ge fraction introduces two-dimensional correlated disorder, and up to five different ordered polymorphs can be identified in the resulting intergrowth materials. We report synthesis, structural characterization and energy minimization calculations that explain these findings. An energy penalty for Si/Ge substitution in ITW explains the phase selectivity change, while reduced energy differences between HPM-18 polymorphs in GeO<inf>2</inf> compositions account for the increased disorder as the Ge fraction increases., Financial support from the Spanish Ministry of Science and Innovation (PID2022-137889OB-I00, TED2021-131223B-I00, and MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Synchrotron powder X-ray diffraction experiments were performed at the Materials Science Powder Diffraction beamline bl04 at the ALBA Spanish Synchrotron with the collaboration of the ALBA staff. H. Y. is grateful to the China Scholarship Council for a PhD grant. S. R. G. B. acknowledges grant RYC2022-036070-I funded by MICIU/AEI/10.13039/501100011033 and by “ESF+”. The authors would like to acknowledge the computing time provided by the Servicio de Supercomputación de la Universidad de Granada. We acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445 S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competition Between Protein and DNA for Binding to Natural Sepiolite Nanofibers

  • Adame Brooks, D.
  • Piétrement, O.
  • Dardillac, E.
  • Castro Smirnov, F.A.
  • Aranda, Pilar
  • Ruiz-Hitzky, Eduardo
  • Lopez, B.S.
Introduction: Sepiolite nanofibers, which are natural silicates belonging to the clay mineral family, could be promising potential nanocarriers for the nonviral transfer of biomolecules. The physicochemical characteristics of sepiolite make it capable of binding various types of biological molecules, including polysaccharides, lipids, proteins and viruses. Sepiolite nanofibers have also been shown to bind effectively to various types of DNA molecules through electrostatic interactions, hydrogen bonds, cationic bridges and van der Waals forces. In this study, we analyzed the adsorption of DNA and proteins to sepiolite by analyzing the competition among these biomolecules during the adsorption process. Methods: To determine the binding of sepiolite to proteins, we used BSA and a monoclonal antibody (mAb) against the CD4 membrane antigen as a model. The binding efficiency was measured by adsorption isotherms. Zeta potential measurements of the suspensions were performed using a Brookhaven NanoBrook 90 Plus PALS instrument. Results: We show here that the adsorption of proteins to sepiolite is increased in the presence of CaCl2 and is charge-dependent and that sepiolite can adsorb proteins even when their net charges are equal to those on its surface. Coating of sepiolite with DNA (Sep/ DNA bionanocomposites) reduces the absorption efficiency of both BSA and mAb, and this can be rescued by CaCl2. Conversely, preincubation of sepiolite with BSA or the mAb decreased the efficiency of DNA binding; Ca2+ restored the binding efficiency for BSA but not for the mAb. Changes in pH result in changes in the net charge of proteins, influencing the amount of protein adsorbed. Conclusion: Although various types of protein interactions with mineral clays have been described, our results confirm that electrostatic forces are among the primary interactions in the adsorption process. These results pave the way for the use of biohybrids as a new class of nanoplatform for gene transfer with potential clinical applications. © 2025 Adame Brooks et al., This work was supported by the Institut National du Cancer (PLBIO21-072), La Ligue Contre le Cancer, and ITMO Cancer (PCSI 2022). P.A. & E.R.-H. thank the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain) and “ERDF A way of making Europe” (EU) for financial support (project PID2022-137889OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amphotericin B intercalated in layered clays as effective antifungal systems against eumycetoma causative agents

  • Misol, Alexander
  • Sáez, Esther
  • Colom, María Francisca
  • Darder, Margarita
  • Aranda, Pilar
Eumycetoma and other subcutaneous mycosis are severe chronic infections with a high incidence in tropical and subtropical regions, whose current treatment has a low curation rate. In the search for more effective and affordable therapies, hybrid materials based on amphotericin B (AmB), an antifungal drug with a broad spectrum of action, appear promising for localized treatment at the site of infection. In this context, the immobilization of AmB in suitable nanocarriers would be helpful to minimize its adverse side effects and ensure a controlled release over time. For this purpose, montmorillonite (MMT), showing cation exchange capacity, and layered double hydroxides (LDH), with anion exchange capacity, are explored as possible supports, taking advantage of the amphoteric character of AmB. X-ray diffraction (XRD) confirms the intercalation of AmB in both the MMT-based and LDH-based hybrids. The protective effect of the inorganic layers on the encapsulated AmB avoiding its oxidation and agglomeration is also proven. A release study from the different supports is carried out in simulated wound fluid (SWF) and in Sabouraud Dextrose Broth (SDB) growth medium, showing a sustained release for at least 60 days. Furthermore, in vitro tests were carried out against two causative agents of eumycetoma, Aspergillus flavus and Subramaniula thielavioides species. These results confirmed the capacity of the two layered hybrids to inhibit the growth of both fungal strains, with the LDH-based hybrid showing a stronger growth inhibition effect on A. flavus., The authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S and the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00 and PID2022-137889OB-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00), as well as partial financial support by a grant for research projects linked to international development cooperation UMH-GVA (Spain), reference SOLCIF 2022/0005 (COD. 11-134-4-2023-0133)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unusual high fluorescence of a 7,7′-diazaisoindigo derivative: A photophysical study

  • Moral, Mónica
  • García, Rocío
  • Garzón, Andrés
  • García-Frutos, Eva M.
7,7′-Diazaisoindigos are π-conjugated compounds but with poor luminescence properties. Their poor luminescence is generally attributed to the twisting around the central C7–C7′ bond in the excited state which favors non-radiative decay. We have found an unusual high fluorescence quantum yield (ΦF ≈ 15 %) in a N,N‑Octyl-7,7′-diazaisoindigo derivative incorporating two triphenylamine (TPA) subunits at 5,5′-positions (called compound 12). There are very few examples of fluorescent 7,7′-diazaisoindigos have been reported and the emission mechanism is generally associated by the hindering of the rotation around the central C7–C7′ bond. Unexpectedly, 12 also experiences a twisting around the central C7–C7′ bond in the excited state but is highly emissive. The intense fluorescence emission of 12 was attributed to the coexistence of two TPA-7-azaoxindole subunits acting as two fluorophores into a single molecule. The fluorescence emission of 12 is also sensitive to the polarity of the solvent. The intramolecular charge transfer character of the excited state was studied combining spectroscopic and theoretical methods., E.M.G.F acknowledges to the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00, PID2022-137889OB-I00 and TED2021-131223B-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00). This work is supported by ‘Universidad de Castilla-La Mancha’ (project 2022-GRIN-34143) and by the ‘Junta de Comunidades de Castilla-La Mancha’ (project SBPLY/21/180501/000042)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent Synthesis Routes to Previously Inaccessible Zeolite Porosity: From Ultrasmall Pore to Ultraporous Materials

  • Shin, Jiho
  • Yu, Huajian
  • Jo, Donghui
  • Gao, Zihao Rei
  • Villaescusa, Luis A
  • Hong, Suk Bong
  • Camblor, Miguel Ángel
Published as part of ACS Applied Materials & Interfaces special issue “Harnessing the Power of Porosity: Future Trends and Applications”., The diverse porosity and properties of zeolites, together with their stability, drive applications from catalysis to adsorption. Conventional hydrothermal synthesis has yielded a large number of zeolite framework types, the vast majority of which are synthetic. However, this approach still has limitations, as exemplified by the large disparity between known and hypothetical but feasible framework types. This Perspective highlights recent unconventional synthesis routes that expand the range of attainable structures and porosities: ultrasmall open pores by zeolite reconstruction; unfeasible zeolites with tunable pores by assembly disassembly organization-reassembly; the embedded isoreticular RHO zeolite family synthesized using mixed inorganic cations; shape selective small and medium pore zeolites synthesized via an excess fluoride approach; and phosphonium-enabled ultraporous zeolites (<13.2 tetrahedral atoms/1000 Å3). Their associated applications include selective dehydration, CO2 capture, catalysis, and decontamination. Although challenges such as scalability, organic structure-directing agent cost and emissions persist, these unconventional chemistries offer important opportunities for further evolution of zeolite structures for environmental, energy and health-related applications., We acknowledge financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, PID2021-128141OB-C22 and PID2024-162542OB-I00 MCIN/AEI/10.13039/501100011033), the Consejería de Educación, Ciencia y Universidades, Comunidad de Madrid (SYG-2024-ECO-737, HALZEOCAT-CM), EcoPro HN, Shanxi Research Institute of Huairou Laboratory, and from the Korea Research Institute of Chemical Technology (KK2611-10 and KK2611-20). We also acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445 S., Peer reviewed