Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanism of the Low-Temperature Organic Removal from Imidazolium-Containing Zeolites by Ozone Treatment: Fluoride Retention in Double-4-Rings

  • Rei Gao, Zihao
  • Márquez-Álvarez, Carlos
  • Rodríguez-Gómez Balestra, Salvador
  • Yu, Huajian
  • Camblor, Miguel A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] For zeolites synthesized using imidazolium cations, the organic matter can be extracted at very low temperatures (100 °C) using ozone. This is possible for zeolites with 12-ring or larger pores but requires higher temperatures in medium-pore zeolites. The first chemical events in this process occur fast, even at room temperature, and imply the loss of aromaticity likely by the formation of an adduct between ozone and the imidazole ring through carbons C4 and C5. Subsequent rupture of the imidazole ring provides smaller and more flexible fragments that can desorb more readily. This process has been studied experimentally, mainly through infrared spectroscopy, and theoretically by density functional theory. Amazingly, fluoride anions occluded in the small double-four-ring units (d4r) during the synthesis remain inside the cage throughout the whole process when the temperature is not too high (¿150 °C). However, fluoride in larger cages in MFI ends up bonded to silicon in penta or hexacoordinated units, likely out of the cages, after ozone treatment at 150 °C. For several germanosilicate zeolites, the process allows their subsequent degermanation to yield stable high-silica zeolites. Quaternary ammonium cations require harsher conditions that eventually also extract fluoride from zeolite cages, including the d4r unit., Grants PID2019-105479RB-I00, PID2022-138481NB-I00, PID2022-137889OB-I00, TED2021-131223B-I00, PID2021-128141OB-C22, and FJC2018-035697-I were funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. M.A.C. thanks J. C. van der Waals for sharing unpublished information on his pioneering work. H.Y. is grateful to the China Scholarship Council (CSC) for a Ph.D. fellowship. S.R.G.B. also thanks the Consejeria de Universidades, Investigacion e Innovacion, Junta de Andalucia, for the POSTDOC_21_00069 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stable Silica-Based Zeolites with Three-Dimensional Systems of Extra-Large Pores

  • Yu, Huajian
  • Gao, Zihao Rei
  • Camblor, Miguel A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] Zeolites are microporous crystalline materials that find a very wide range of applications, which, however, are limited by the size and dimensionality of their pores. Stable silica zeolites with a three-dimensional (3D) system of extra-large pores (ELP, i.e., pores with minimum windows along the diffusion path consisting of more than 12 SiO4/2 tetrahedra, 12R) are in demand for processing larger molecules than zeolites can currently handle. However, they have challenged worldwide synthetic capabilities for more than eight decades. In this review we first present a brief history of the discovery of ELP zeolites. Next, we show that earlier successes of zeolites with 3D ELP were not actually zeolites, but rather interrupted structures with, in addition, a composition that severely detracted from their stability. Finally, we present three new fully connected stable silica-based 3D ELP zeolites ZEO-1, ZEO-3 and ZEO-5, discuss their preparation methods and stability as well as the clear advantage of their increased porosity in catalysis and adsorption processes involving large molecules. We will discuss peculiar characteristics of their preparation and present two new reaction types giving rise to zeolites (1D-to-3D topotactic condensation and interchain expansion), highlighting how new synthesis methods can provide materials that would otherwise be unfeasible., Financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, PID2021-128141OB-C22, TED2021-131223B-I00, MCIN/AEI/10.13039/501100011033), and Generalitat Valenciana (PROMETEO CIPROM/2021/007) are gratefully acknowledged. H.Y. is grateful to the China Scholarship Council for a PhD grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

2-Isopropyl-1,3-dimethylimidazolium as a versatile structure-directing agent in the synthesis of zeolites

  • Yu, HJ
  • Rojas, A
  • Gao, Zihao
  • Gómez-Hortigüela, L.
  • Li, JA
  • Paillaud, JL
  • Camblor, Miguel A.
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
[EN] Organic structure directing agents with low specificity offer opportunities for zeolite discovery by tweaking other structure-directing factors., The authors thank the Spanish Research Agency, MCIN/AEI/10.13039/501100011033, and the European Union for funding (Projects PID2019-105479RB-I00, PID2019-107968RB-I00, and PID2021-128141OB-C22, FEDER and TED2021-131223B-I00, "NextGenerationEU"/PRTR). H. Y. is grateful to the China Scholarship Council (CSC) for a PhD fellowship. L. A. V. also thanks the Generalitat Valenciana (PROMETEO CIPROM/2021/007).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2-Isopropyl-1,3-dimethylimidazolium as a versatile structure-directing agent in the synthesis of zeolites

  • Yu, Huajian
  • Rojas, Álex
  • Gao, Zihao Rei
  • Gómez-Hortigüela Sainz, Luis
  • Villaescusa, Luis A.
  • Li, Jian
  • Paillaud, Jean-Louis
  • Camblor, Miguel Ángel
[EN] An organic cation lacking specificity in its structure-directing action offers the possibility, through the screening of other structure-directing parameters, to synthesize a variety of zeolites. In this work we show that the organic structure-directing agent 2-isopropyl-1,3-dimethylimidazolium (2iPr13DMI) can produce up to seven different zeolite phases depending on water concentration, the presence of inorganic impurities, crystallization temperature and time, and germanium molar fraction. The obtained phases are very different in terms of pore system, connectivity of the zeolite structure and structural units. At the pure SiO2 side, ZSM-12 and SSZ-35 dominate, with ZSM-12 being favored by the presence of potassium impurities and by less concentrated conditions. The introduction of Ge at low levels favors SSZ-35 over ZSM-12 and as the Ge fraction increases it successively affords CSV, -CLO and two distinct UOS zeolites, HPM-11 and HPM-6. These two zeolites have the same topology but distinct chemical compositions and display powder X-ray diffraction patterns that are much different from each other and from that of as-synthesized IM-16 (UOS reference material). They also show different symmetry at 96 K. Rietveld refinements of the three as-made UOS materials mentioned are provided. HPM-6 and HPM-11 are produced in distinct, non-adjacent crystallization fields. The frequent cocrystallization of the chiral STW zeolite, however, did not afford its synthesis as a pure phase. Molecular mechanics simulations of the location of the organic cation and host–guest interactions fail to explain the observed trends, but also considering the intrinsic stability of the zeolites and the effect of germanium help to rationalize the results. The study is completed by DFT calculations of the NMR chemical shifts of 13C in UOS (helping to understand splittings in the spectrum) and 19F in CSV (supporting the location of fluoride inside the new [4452], which is an incomplete double 4-ring)., The authors thank the Spanish Research Agency, MCIN/AEI/10.13039/501100011033, and the European Union for funding (Projects PID2019-105479RB-I00, PID2019-107968RB-I00, and PID2021-128141OB-C22, FEDER and TED2021-131223B-I00, “NextGenerationEU”/PRTR). H. Y. is grateful to the China Scholarship Council (CSC) for a PhD fellowship. L. A. V. also thanks the Generalitat Valenciana (PROMETEO CIPROM/2021/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

[Dataset] Interchain Expanded Extra-Large Pore Zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel Ángel
Source data for the article entitle "Interchain Expanded Extra-Large Pore Zeolites", Nature 2024, including the detailed structural and physicochemical and chemical characterization of those zeolites, [EN] 1. Description of methods used for collection/generation of data: Diffraction (electron, synchrotron X-ray, neutron). Infrared spectroscopy multinuclear MAS NMR gas adsorption electron paramagnetic resonance DFT calculations Catalytic reaction 2. Methods for processing the data: Those needed depending on the type of data (SHELX, Rietveld refinement, fast Fourier Transform...). Please, check the paper., Spanish Ministry of Science Innovation, PID2019-105479RB-I00, TED2021-131223B-I00 projects, and RYC2018-024561-I and FJC2018-035697-I National Natural Science Foundation of China, 22371121, 22288101, 21920102005, 21835002, 22271115 and 52270111 National Key Research and Development Program of China, 2022YFA1503600, 2021YFA1501202, 2021YFA1501401 the 111 project, B17020 Fundamental Research Funds for the Central Universities of China, 020514380306 Consejería de Universidades, Investigación e Innovación, Junta de Andalucía, POSTDOC_21_00069 Knut and Alice Wallenberg Foundation, KAW, 2012-0112 European Union’s Horizon 2020 research and innovation program, 823717-ESTEEM3 regional government of Aragon, DGA E13_20R China Spallation Neutron Source, P1823060200002, Fig-2.xlsx; Ex-Fig1.xlsx; Ex-Fig. 3.xlsx; Ex-Fig. 6.xlsx; Ex-Fig. 7.xlsx; Ex-Fig. 8.xlsx; Fig-S8.xlsx; Fig-S9.xlss; Fig-S10.xlsx Fig-S11.xlsx Fig-S12.xlsx Fig-S13.xlsx Fig-S14.xlsx Fig-S15.xlsx Fig-S16a.csv Fig-S16b.csv Fig-S17.csv Fig-S18.xlsx; Fig-S19.csv; Fig-S20.xlsx; Fig-S21.xlsx; Fig-S22a.csv; Fig-S22b.csv; Fig-S23.xlsx; Fig-S24.xlsx; Fig-S25.xlsx, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interchain-expanded extra-large-pore zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel Ángel
Stable aluminosilicate zeolites with extra-large pores that are open through rings of more than 12 tetrahedra could be used to process molecules larger than those currently manageable in zeolite materials. However, until very recently1-3, they proved elusive. In analogy to the interlayer expansion of layered zeolite precursors4,5, we report a strategy that yields thermally and hydrothermally stable silicates by expansion of a one-dimensional silicate chain with an intercalated silylating agent that separates and connects the chains. As a result, zeolites with extra-large pores delimited by 20, 16 and 16 Si tetrahedra along the three crystallographic directions are obtained. The as-made interchain-expanded zeolite contains dangling Si-CH3 groups that, by calcination, connect to each other, resulting in a true, fully connected (except possible defects) three-dimensional zeolite framework with a very low density. Additionally, it features triple four-ring units not seen before in any type of zeolite. The silicate expansion-condensation approach we report may be amenable to further extra-large-pore zeolite formation. Ti can be introduced in this zeolite, leading to a catalyst that is active in liquid-phase alkene oxidations involving bulky molecules, which shows promise in the industrially relevant clean production of propylene oxide using cumene hydroperoxide as an oxidant., Financial support from the Spanish Ministry of Science Innovation (PID2019-105479RB-I00 and TED2021-131223B-I00 Projects, MCIN/AEI/10.13039/501100011033 and grants RYC2018-024561-I and FJC2018-035697-I); the National Natural Science Foundation of China (grants 22371121, 22288101, 21920102005, 21835002, 22271115 and 52270111); the National Key Research and Development Program of China (grants 2022YFA1503600, 2021YFA1501202 and 2021YFA1501401); the 111 Project (grant B17020); the Fundamental Research Funds for the Central Universities of China (grant 020514380306); and the Consejería de Universidades, Investigación e Innovación, Junta de Andalucía (grant POSTDOC_21_00069) is gratefully acknowledged. Continuous rotation electron diffraction data were collected at the Electron Microscopy Center, Department of Materials and Environmental Chemistry at Stockholm University with the support of the Knut and Alice Wallenberg Foundation (grant 2012-0112) through the 3DEM-NATUR Project. We acknowledge the use of instrumentation provided by the National Facility ELECMI (Integrated Infrastructure for Electron Microscopy of Materials) ICTS (Instalación Científico Técnica Singular) node Laboratorio de Microscopías Avanzadas at the University of Zaragoza. Additional funding from the European Union’s Horizon 2020 Research and Innovation Program (grant 823717-ESTEEM3) and the Regional Government of Aragon (grant DGA E13_20R) is also acknowledged. H.Y. is grateful to the China Scholarship Council for a PhD grant. Synchrotron powder X-ray diffraction data experiments were performed at the MSPD (Materials Science Powder Diffraction) beamline bl04 at the ALBA Spanish Synchrotron with the collaboration of the ALBA staff. We thank C3UPO (Centro de Cálculo Científico de la Universidad Pablo de Olavide) for providing high-performance computing facilities and L.-H. He for help with the powder neutron diffractions data collection performed at the general purpose powder diffractometer of China Spallation Neutron Source, Dongguan, China (Project General Purpose Powder Diffractometer, P1823060200002)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure, and Phase Transformations of HPM-3: A Layered Precursor of the Neutral Aluminophosphate with JSN Topology

  • Yu, Huajian
  • Kim, Eun Jeong
  • Gao, Zihao Rei
  • Lee, Jeong Hwan
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Li, Jian
  • Márquez Álvarez, Carlos
  • Marler, Bernd
  • Hong, Suk Bong
  • Camblor, Miguel Ángel
The structure of HPM-3, a layered aluminophosphate prepared using 1,2,3-trimethylimidazolium (123TMI) as an organic structure-directing agent by the fluoride route, has been solved by continuous rotation electron diffraction (cRED), and Rietveld refined against synchrotron powder X-ray diffraction data. Charge balance of the occluded cation is achieved through F- anions and dangling Al(OP)3OH groups. Half of the Al is pentacoordinated in negatively charged Al(OP)4-F-Al(OP)4 pairs. The layers in HPM-3, denoted as jsn, are observed in the fully connected metalloaluminophosphate molecular sieves with JSN topology. Thus, HPM-3 can be a precursor to a JSN metal-free aluminophosphate if a topotactic condensation can be reached, which proved to be difficult but feasible. Treatments under different conditions resulted in a number of known (PST-27 and AlPO4-5 by a disruptive transformation) or new phases (through mild thermal treatments). Among the latter, a layered phase with a shorter interlayer space, denoted as HPM-3S, contains half the amount of organic as HPM-3. This is afforded by the capability of 123TMI compounds to sublimate at relatively low temperatures. HPM-3S still contains the same jsn layers. Therefore, the transformation of HPM-3 into HPM-3S is topotactic but without reaching condensation. Among the phases appearing under calcination conditions at relatively low temperature (<350 °C), we observed solids compatible with the JSN topology, but with poor crystallinity. This is attributed to a wrong alignment in HPM-3 of the dangling Al(OP)3OH and P(OAl)3═O that should connect adjacent layers in a topotactic condensation, which favors 1-dimensional stacking disorder by random shifts of layers during the thermal treatments. However, detemplation at a much lower temperature (175 °C) using O3 finally afforded an aluminophosphate molecular sieve with JSN topology with only moderate stacking disorder. This is just the third reported 2D-to-3D topotactic condensations in aluminophosphates. © 2024 American Chemical Society., Financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, TED2021-131223B–I00, PID2022-138481NB-I00, MCIN/AEI/10.13039/501100011033), the National Creative Research Initiative Program (2021R1A3A3088711) through the National Research Foundation of Korea, are gratefully acknowledged. We thank CSIC and MCIN for provision of synchrotron radiation facilities at the beamline BM25-SpLine at the ESRF (Grenoble, France). Continuous rotation electron diffraction data were collected at the Electron Microscopy Center, Department of Materials and Environmental Chemistry at Stockholm University with the supports of the Knut and Alice Wallenberg Foundation (grants 2003-0198 & 2012-0112) through the Fe -TEM and the 3DEM-NATUR Project, respectively. H.Y. is grateful to the China Scholarship Council for a PhD grant. S.R.G.B. acknowledges grant RYC2022-036070-I funded by MICIU/AEI/10.13039/501100011033 and by “ESF+”. Authors would like to thank the computing time provided by the Servicio de Supercomputación de la Universidad de Granada., Supporting information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulated Optoelectronic Properties of MOF/CNF Bionanocomposite Films for Bacterial Growth Control under Visible Light

  • Guerrero, Joab D.
  • Martín-Sampedro, Raquel
  • Cuadrado, Ramón
  • Llano, Iván
  • García-Frutos, Eva M.
  • Aranda, Pilar
  • Ibarra, David
  • Eugenio, María E.
  • Vázquez, Luis
  • Pérez-Carvajal, Javier
  • Darder, Margarita
The present work reports an experimental and theoretical investigation of tuning the optoelectronic properties of MIL-125-NH2 nanoparticles by grafting aromatic molecules. The postsynthetic modification of the MOF MIL-125-NH2 with 3,4-dihydroxybenzaldehyde (DBA) resulted in a 23% reduction in the bandgap energy, from 2.71 to 2.08 eV, while increasing the absorbance throughout the visible region of the spectrum, which could be attributed to stabilization due to enol-imine/keto-enamine tautomerism, as supported by DFT theoretical calculations. Pristine and grafted MOFs were assembled into cellulose nanofibers (CNF) for the preparation of functional CNF-based bionanocomposites. The mechanical properties of the films improved, with Young’s modulus increasing from 1.3 GPa in CNF to 7.5 GPa in the film with 20% MOF loading. The potential of the developed materials for photocatalytic antimicrobial therapy was evaluated against Staphylococcus aureus (S. aureus). In vitro tests showed that both bionanocomposite films with pristine and DBA-modified MOF remarkably reduced bacterial growth due to the photocatalytic action of the MOF under visible light. The inhibition values were around 58% and 72%, respectively, while minimal inhibition was observed under dark conditions. These initial results support the potential use of the developed bionanocomposite films as wound dressings., The authors acknowledge financial support from projects funded by AEI, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00, PID2022-137889OB-I00, and PID2022-141965OB-C21) and “ERDF A way of making Europe” (EU, projects PID2022-137889OB-I00 and PID2022-141965OB-C21), and projects TED2021-131223B–I00 and TED2021-132122B–C1 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”. J.P.-C. also acknowledges financial support from RYC2022-037460-I Ramon y Cajal contract, funded by AEI (MCIN/AEI/10.13039/501100011033). R.C. and J.P.-C. thankfully acknowledge RES resources provided by the Barcelona Supercomputing Center (BSC) in MareNostrum5 GPP to QHS-2024-2-0024. J.D.G. acknowledges the PhD fellowship CSIC PRE23_ICMM_111 (AEI, Spain). We also thank the Interdisciplinary Platforms for Sustainable Plastics towards a Circular Economy (SusPlast) and for Sustainability and Circular Economy (SosEcoCir) of the Spanish National Research Council (CSIC). The authors also acknowledge Dr A. Jacas for the design and construction of the irradiation device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An overloaded pure silica zeolite ISV synthesized using a phosphonium cation

  • Yu, Huajian
  • Balestra, Salvador R. G.
  • Gao, Zihao Rei
  • Camblor, Miguel Ángel
A pure silica zeolite with ISV structure was synthesized using the tricyclopentylmethylphosphonium (Cp3MP+) cation under fluoride media. Analysis of the organic content in the zeolite suggested the presence of more than four cations per unit cell, while fluoride anions were exclusively located in the four double four-membered rings of the structure. 29Si solid-state NMR demonstrated a significant concentration of Q3 Si species, i.e., S̲i̲(OSi)3(OH), in the structure, which afforded charge balance but contrasted with the most common observation of defect-free pure silica zeolites prepared in fluoride media at near-neutral pH. Calculations showed that improved stability was obtained in an overloaded (i.e., containing more Cp3MP+ than F- and three-channel crossings) defective zeolite. The calculated stabilization of ISV was larger with Cp3MP+ than with the cyclohexyl analog used to produce ZEO-1, a zeolite with an extra-large 3D pore system. Substitution of small amounts of Cp3MP+ by tetraethylammonium stopped crystallization instead of producing ISV/BEC intergrowths, despite calculations on the bare zeolites suggesting improved stability of the intergrowths. This rendered the observed difficulty in obtaining such intergrowths puzzling and likely dependent on a disruption of the host-guest assembly. Compared with prior ISV materials, this zeolite displayed a minimum amount of disorder, which, however, was sufficient to impede proper Rietveld refinement., Financial support from the Spanish Ministry of Science Innovation (PID2022-137889OB-I00, TED2021-131223B-I00, MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Synchrotron powder X-ray diffraction data experiments were performed at the Materials Science Powder Diffraction beamline bl04 at the ALBA Spanish Synchrotron with the collaboration of the ALBA staff. H. Y. is grateful to the China Scholarship Council for a PhD grant. S. R. G. B. acknowledges grant RYC2022-036070-I funded by MICIU/AEI/10.13039/501100011033 and by “ESF+”. Authors would like to thank the computing time provided by the Servicio de Supercomputación de la Universidad de Granada., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Direct hydrothermal synthesis of zeolites and beyond: Interchain expansion and topotactic condensation

  • Yu, Huajian
Tesis doctoral. (2025). Universidad Autónoma de Madrid. Programa de Doctorado en Química Aplicada. Cuevas Rodríguez, Jaime Fernando; tutor., [EN] For conventional hydrothermal synthesis, organic structure-directing agents (OSDA, see below), type and amount of T atoms (i.e., atoms participate as tetrahedra in the zeolite framework), HF contents, water contents, crystallization temperature and time have been investigated in silicates, germanosilicates, aluminosilicates and aluminophosphates syntheses. We have discovered and characterized zeolites HPM-9 (stable low Ge UWY-like structure) and HPM-18 (new structure) by direct synthesis. We also obtained three zeolite precursors (HPM-3, HPM-22 and HPM-23) that give rise to three zeolites (JSN, MTF and HEU, respectively) by topotactic condensation. We studied systematically the calcination parameters after the hydrothermal synthesis, including various temperatures and durations under two types of calcination (in air and N2), as well as a combination of ozone treatment followed by N2 calcination for HPM-3 topotactic condensation. These approaches were applied not only for detemplation but also to promote topotactic condensation. By Interchain expansion, we synthesized two interrupted zeolites ZEO-4A and ZEO-4B using two different silane reagents to silylate and connect ZEO-2 chain precursors and obtained fullyconnected 3D extra-large pore zeolite ZEO-5 (HZF) by topotactic condensation of ZEO-4A and ZEO-4B., [ES] Para la síntesis hidrotérmica convencional, se han investigado los agentes orgánicos directores de estructura (OSDA, véase más adelante), el tipo y la cantidad de átomos T (es decir, átomos que participan como tetraedros en la estructura de la zeolita), el contenido de HF, el contenido de agua, la temperatura y el tiempo de cristalización en síntesis de silicatos, germanosilicatos, aluminosilicatos y aluminofosfatos. Hemos descubierto y caracterizado las zeolitas HPM-9 (estructura estable de bajo contenido en Ge isomórfica a UWY) y HPM-18 (estructura nueva), obtenidas mediante síntesis directa. También hemos obtenido tres precursores de zeolita (HPM-3, HPM-22 y HPM-23) que dan lugar a tres zeolitas (JSN, MTF y HEU, respectivamente) mediante condensación topotáctica. Estudiamos sistematicamente los parametros de calcinacion despues de la sintesis hidrotermal, incluyendo varias temperaturas y duraciones en dos tipos de calcinación (en aire y N2), así como una combinación de tratamiento con ozono seguido de calcinación con N2 para la condensación topotáctica de HPM-3. Estos enfoques se aplicaron no solo para la destemplación, sino también para promover la condensación topotáctica. Para la expansión entre cadenas, sintetizamos dos zeolitas interrumpidas, ZEO-4A y ZEO-4B, utilizando dos reactivos de silano diferentes sobre el silicato en cadena ZEO-2, y obtuvimos la zeolita ZEO-5 (HZF), de poros extragrandes en 3D y totalmente conectada en 3D, mediante condensación topotáctica de ZEO-4A y ZEO-4B., China Scolarship Council y agencia MCIN/AEI/10.13039/501100011033 (PID2022-137889OB-I00, TED2021-131223B-I00, RYC2022-036070-I, PID2019-105479RB-I00, PID2019-107968RB-I00, PID2021-128141OB-C22) Generalitat Valenciana (PROMETEO CIPROM/2021/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unusual high fluorescence of a 7,7′-diazaisoindigo derivative: A photophysical study

  • Moral, Mónica
  • García, Rocío
  • Garzón, Andrés
  • García-Frutos, Eva M.
7,7′-Diazaisoindigos are π-conjugated compounds but with poor luminescence properties. Their poor luminescence is generally attributed to the twisting around the central C7–C7′ bond in the excited state which favors non-radiative decay. We have found an unusual high fluorescence quantum yield (ΦF ≈ 15 %) in a N,N‑Octyl-7,7′-diazaisoindigo derivative incorporating two triphenylamine (TPA) subunits at 5,5′-positions (called compound 12). There are very few examples of fluorescent 7,7′-diazaisoindigos have been reported and the emission mechanism is generally associated by the hindering of the rotation around the central C7–C7′ bond. Unexpectedly, 12 also experiences a twisting around the central C7–C7′ bond in the excited state but is highly emissive. The intense fluorescence emission of 12 was attributed to the coexistence of two TPA-7-azaoxindole subunits acting as two fluorophores into a single molecule. The fluorescence emission of 12 is also sensitive to the polarity of the solvent. The intramolecular charge transfer character of the excited state was studied combining spectroscopic and theoretical methods., E.M.G.F acknowledges to the Agencia Estatal de Investigación, MCIN/AEI/10.13039/501100011033 (Spain, projects PID2019-105479RB-I00, PID2022-137889OB-I00 and TED2021-131223B-I00) and “ERDF A way of making Europe” (EU, project PID2022-137889OB-I00). This work is supported by ‘Universidad de Castilla-La Mancha’ (project 2022-GRIN-34143) and by the ‘Junta de Comunidades de Castilla-La Mancha’ (project SBPLY/21/180501/000042)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interchain-expanded extra-large-pore zeolites

  • Gao, Zihao Rei
  • Yu, Huajian
  • Chen, Fei-Jian
  • Mayoral, Álvaro
  • Niu, Zijian
  • Niu, Ziwen
  • Li, Xintong
  • Deng, Hua
  • Márquez-Álvarez, Carlos
  • He, Hong
  • Xu, Shutao
  • Zhou, Yida
  • Xu, Jun
  • Xu, Hao
  • Fan, Wei
  • Balestra, Salvador R. G.
  • Ma, Chao
  • Hao, Jiazheng
  • Li, Jian
  • Wu, Peng
  • Yu, Jihong
  • Camblor, Miguel A.
Stable aluminosilicate zeolites with extra-large pores that are open through rings of more than 12 tetrahedra could be used to process molecules larger than those currently manageable in zeolite materials. However, until very recently1,2,3, they proved elusive. In analogy to the interlayer expansion of layered zeolite precursors4,5, we report a strategy that yields thermally and hydrothermally stable silicates by expansion of a one-dimensional silicate chain with an intercalated silylating agent that separates and connects the chains. As a result, zeolites with extra-large pores delimited by 20, 16 and 16 Si tetrahedra along the three crystallographic directions are obtained. The as-made interchain-expanded zeolite contains dangling Si–CH3 groups that, by calcination, connect to each other, resulting in a true, fully connected (except possible defects) three-dimensional zeolite framework with a very low density. Additionally, it features triple four-ring units not seen before in any type of zeolite. The silicate expansion–condensation approach we report may be amenable to further extra-large-pore zeolite formation. Ti can be introduced in this zeolite, leading to a catalyst that is active in liquid-phase alkene oxidations involving bulky molecules, which shows promise in the industrially relevant clean production of propylene oxide using cumene hydroperoxide as an oxidant