Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Arias Montano. Repositorio Institucional de la Universidad de Huelva
Publicación Artículo científico (JournalArticle)

Sustainable asphalt mixes manufactured with reclaimed asphalt and modified-lignin-stabilized bitumen emulsions

  • Yuliestyan, Avido
  • Gavet, Thomas
  • Marsac, Paul
  • García Morales, Moisés|||0000-0003-4153-487X
  • Partal López, Pedro|||0000-0003-0141-0733
This work aims to develop asphalt mixes with 100 % reclaimed asphalt pavements (RAP) as source of aggregates and bitumen emulsions stabilized by amine-functionalized lignin. To that end, reduced-temperature asphalt technologies between 80 and 130 °C were assessed. Previously, processing parameters of emulsions were evaluated by droplet size distribution and rheology measurements. Furthermore, a study combining Pendant drop and Sessile drop (on a prototype polyethylene surface) tests showed that emulsion aqueous phase containing modified lignin would be able to wet the hydrophobic surface of RAP. Manufactured asphalt mixes were characterized according to French design method for hot mixes, including gyratory compaction, rutting resistance, complex modulus and fatigue resistance tests. The results obtained showed that reduced-temperature asphalt mixes could be successfully prepared to meet French design requirements, which would further minimize impact to environment. However, mix design has required a semi-quantitative approach for estimating ‘active’ RAP binder content, by balancing the manufacturing temperature and the fresh bitumen required.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emulsion Stabilization by Cationic Lignin Surfactants Derived from Bioethanol Production and Kraft Pulping Processes

  • Yuliestyan, Avido
  • Partal, Pedro
  • Navarro, Francisco J.
  • Martín-Sampedro, Raquel
  • Ibarra, David
  • Eugenio, María E.
14 Pág. Centro de Investigación Forestal (CIFOR), Oil-in-water bitumen emulsions stabilized by biobased surfactants such as lignin are in line with the current sustainable approaches of the asphalt industry involving bitumen emulsions for reduced temperature asphalt technologies. With this aim, three lignins, derived from the kraft pulping and bioethanol industries, were chemically modified via the Mannich reaction to be used as cationic emulsifiers. A comprehensive chemical characterization was conducted on raw lignin-rich products, showing that the kraft sample presents a higher lignin concentration and lower molecular weight. Instead, bioethanol-derived samples, with characteristics of non-woody lignins, present a high concentration of carbohydrate residues and ashes. Lignin amination was performed at pH = 10 and 13, using tetraethylene pentamine and formaldehyde as reagents at three different stoichiometric molar ratios. The emulsification ability of such cationic surfactants was firstly studied on prototype silicone oil-in-water emulsions, attending to their droplet size distribution and viscous behavior. Among the synthetized surfactants, cationic kraft lignin has shown the best emulsification performance, being used for the development of bitumen emulsions. In this regard, cationic kraft lignin has successfully stabilized oil-in-water emulsions containing 60% bitumen using small surfactant concentrations, between 0.25 and 0.75%, which was obtained at pH = 13 and reagent molar ratios between 1/7/7 and 1/28/28 (lignin/tetraethylene pentamine/formaldehyde)., This research is part of SUP&R ITN (FP7-PEOPLE-2013-ITN, Grant agreement 607524) and GreenAsphalt project (ref. 802C1800001) co-funded 80% by FEDER European Programme and 20% by Junta de Andalucía (Consejería de Economía, Conocimiento, Empresas y Unversidades/Agencia IDEA). The authors also wish to thank Comunidad de Madrid and MCIU/AEI/FEDER, UE via grant number SUSTEC-CM S2018/EMT-4348 and RTI2018-096080-B-C22, respectively. The contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting the interaction, exchange of knowledge and collaborations in the field of lignin valorization is gratefully acknowledged., Peer reviewed