Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lignin-enriched residues from bioethanol production: Chemical characterization, isocyanate functionalization and oil structuring properties

  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Ibarra, David
  • Ballesteros, Ignacio
  • Franco, José Mariano
12 Pág., Lignin-enriched waste products from bioethanol production of agriculture residues were tested as structuring agents in castor oil once functionalized with hexamethylene diisocyanate. Cane bagasse, barley and wheat straw were processed through steam explosion, pre-saccharification and simultaneous saccharification and fermentation (PSSF). Alternatively, cane bagasse was submitted to steam explosion and enzymatic hydrolysis (EH). Several Nuclear Magnetic Resonance techniques were used to characterize both residues and NCO-functionalized counterparts. The β-O-4'/resinol/phenylcoumaran content and hydroxyphenyl/guaiacyl/syringyl distribution depend on biomass source, pretreatment, and enzymatic hydrolysis. Total hydroxyl content (from 1.23 for cane bagasse to 1.85 for wheat straw residues), aromatic/aliphatic hydroxyl ratio (0.78 for cane bagasse and 0.61 and 0.49 for barley and wheat straw residues, respectively) and S/G ratio (ranging from 0.25 to 0.86) influence the NCO-functionalization and oleogel rheological response. Oleogels obtained with barley straw residues exhibited the highest values of the storage modulus; around 2 × 105 Pa and 104 Pa for 25% and 20% contents, respectively. PSSF process showed weaker modification, leading to softer viscoelastic response compared to EH. These oleogels exhibited rheological properties similar to lubricating greases of different NLGI grades. Therefore, we herein show an integrative protocol for the valorization of lignin-enriched residues from bioethanol production as potential thickeners of lubricating greases., This work is part of two coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The financial support is gratefully acknowledged. A.M.B-L. also acknowledges the Ph.D. Research Grant FPU16/03697 from MECD (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rheology and adhesion performance of adhesives formulated with lignins from agricultural waste straws subjected to solid-state fermentation

  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Domínguez, Gabriela
  • Eugenio, María E.
  • Franco, José Mariano
8 Pág. Instituto de Ciencias Forestales (ICIFOR), In this study, modified residual lignins from barley and wheat straws submitted to solid-state fermentation with diverse Streptomyces strains were targeted as binders in eco-friendly castor oil-based polyurethane adhesive formulations. The thermo-rheological and adhesion properties of these adhesives were examined and related to the solid-state fermentation yields. Viscoelastic properties were enhanced by lignin addition, and the Streptomyces action generally increased the values of the linear viscoelastic functions. Adhesion performance was dominated by lignin source and further Streptomyces activity and can be correlated with the resulting lignocellulosic composition. Wheat straw lignin-based polyurethane adhesives showed the best performance in metal-textile peeling tests, whereas barley straw lignin provided the best achievements in terms of shear strength in metal-metal and wood-wood joints. Overall, solid-state fermentation with Streptomyces demonstrated to be a suitable pretreatment to conveniently modify and improve residual lignin fractions for application as binders in environmental-friendly polyurethane adhesive formulations., This work was partially funded by two coordinated research MINECO-ERDF projects (CTQ2014-56038-C3-1R and CTQ2014-56038-C3-2R) and the ERDF-Junta de Andalucía 2014-2020 Operational Programme (project UHU-1252599). A.M.B-L. has received a Ph.D. Research Grant from the Ministerio de Educación, Cultura y Deporte (FPU16/03697). The authors gratefully acknowledge the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose Pulp- and Castor Oil-Based Polyurethanes for Lubricating Applications: Influence of Streptomyces Action on Barley and Wheat Straws

  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Blánquez, Alba
  • Hernández, Manuel
  • Eugenio, María E.
  • Franco, José Mariano
15 Pág., The replacement of mineral oils and non-renewable gelling agents is an imperative requirement for the lubricant industry in the near future. In this framework, cellulose pulp and castor oil are proposed as sustainable substitutes for these components. Biological treatment has been explored and evaluated to enhance the dispersing and thickening properties of cellulose pulp in oil media. Streptomyces sp. MDG147 and MDG301 strains were employed to modify agricultural wheat and barley straw residues from which cellulose pulp was obtained afterwards. In addition, an environmentally friendly process for the production of cellulose-pulp-/castor-oil-based polyurethanes was applied, in which neither catalysts nor harmful solvents were used, resulting in chemical oleogels. These oleogels were rheologically and tribologically characterized to evaluate their performance as lubricating greases. The enzymatic activity pattern developed was dependent on the raw material, the strain type, and the temperature, influencing the cellulose pulp's composition, polymerization degree, and crystallinity. These modified characteristics tuned the rheological behavior of the different oleogels, providing a beneficial range of viscoelastic responses and viscosity values that were generally favored by the Streptomyces action. Furthermore, the friction coefficient and dimensions of wear scars measured in a tribological contact were comparable to, or even lower than, those found with commercial and other bio-based lubricating greases that have previously been studied., This work is part of two coordinated research projects (RTI2018-096080-B-C21 and RTI2018-096080-B-C22) sponsored by MICIU-FEDER. A.M.B.-L. has received a Ph.D. Research Grant from the Ministerio de Educación, Cultura y Deporte (FPU16/03697). We gratefully acknowledge the financial support, Peer reviewed