Pasar al contenido principal

FORMULACION DE OLEOGELES BIODEGRADABLES PARA DIVERSAS APLICACIONES INDUSTRIALES A PARTIR DE FRACCIONES LIGNOCELULOSICAS PRETRATADAS Y/O MODIFICADAS QUIMICAMENTE

CTQ2014-56038-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE HUELVA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Arias Montano. Repositorio Institucional de la Universidad de Huelva
Publicación Artículo científico (JournalArticle)

Tribological behaviour of novel chemically modified biopolymer-thickened lubricating greases investigated in a steel–steel rotating ball-on-three plates tribology cell

  • Gallego Calvo, Rocío|||0000-0002-5490-7359
  • Cidade, T.
  • Sánchez Martínez, Rubén|||0000-0002-2515-6883
  • Valencia Barragán, Concepción|||0000-0002-9197-4606
  • Franco Gómez, José María|||0000-0002-3165-394X
In this work, model renewable and biodegradable lubricating greases based on castor oil and chemically modified biopolymers (methylcellulose, chitin and cellulosic pulp) were tribologically characterized in a steel–steel ball-on-plates tribological cell coupled to a controlled-stress rheometer, and the results were compared to those provided by conventional lithium and calcium soap-based greases. Viscous flow, sliding velocity sweep and transient friction tests were carried out and resulting wear scars in the steel plates were evaluated by means of scanning electron microscopy (SEM). Different frictional responses were found depending on the thickener, especially at high temperature. Excepting for most severe conditions, wear is negligible when using chemically modified chitin and methylcellulose-based greases as lubricants.
Arias Montano. Repositorio Institucional de la Universidad de Huelva
Publicación Artículo científico (JournalArticle)

AFM and SEM assessment of lubricating grease microstructures : influence of sample preparation protocol, frictional working conditions and composition

  • Roman Fercheluc, Claudia
  • Valencia Barragán, Concepción|||0000-0002-9197-4606
  • Franco Gómez, José María|||0000-0002-3165-394X
  • Roman Fercheluc, Claudia|||0000-0002-7960-5832
The microstructure of lubricating greases greatly conditions their in-service performance. In that sense, optimal testing protocols are required in order to accomplish their correct morphological characterization. This study explores and compares the suitability of atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques for imaging six different commercial metallic soap-based greases and two novel biopolymer-based formulations. Pros and cons of both techniques and the effect of sample preparation protocol were analysed. The results revealed a wide variety of morphological characteristics depending on composition. Thus, the four anhydrous calcium-based greases demonstrated two clearly distinct microstructures (fibrous and granular) determined by the type of base oil employed. With regard to the lithium complex greases, the typically reported microstructure characterized by well-defined entangled and fibrous network was observed in both AFM and SEM techniques. As for the two biopolymer-based greases, fibre networks were also encountered. Besides this, selected greases were subjected to different tribological tests, and the effect of high-shear frictional working treatments on their microstructure was also analysed. As a result of the friction and internal wear, the AFM results evidenced microstructural changes which depended on grease composition. Overall, the combined use of AFM and SEM techniques was demonstrated to be a powerful approach to microstructurally characterize lubricating greases.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eco-Friendly Oleogels from Functionalized Kraft Lignin with Laccase SilA from Streptomyces ipomoeae: An Opportunity to Replace Commercial Lubricants

  • Domínguez, Gabriela
  • Blánquez, Alba
  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Eugenio, María E.
  • Arias, María Enriqueta
  • Rodríguez, Juana
  • Hernández, Manuel
Centro de Investigación Forestal (CIFOR), This work demonstrates the usefulness of SilA laccase from Streptomyces ipomoeae to functionalize Kraft lignin to be used as a thickener in the preparation of biodegradable oleogels for lubricating purposes. First, conditions for the enzymatic reaction were optimized by determining the polymerization degree of lignin along the incubation time. Next, using rheological characteristics as a response function, the Kraft lignin amount and incubation time were optimized to get the best characteristics of functionalized Kraft lignin to be used as a thickener in castor oil oleogels. In both cases, response surface methodology (RSM) with a factorial design 23 was applied. The results obtained demonstrated that Kraft lignin was oxidized by recombinant laccase from S. ipomoeae (SilA) increasing its reactivity and, as consequence, the molecular weight average. It was estimated that the highest polymerization occurred with a Kraft lignin concentration of 1.25 g/L and an incubation time of 24.0 min. Moreover, the maximum values of the "plateau modulus"for the oleogels within the limits of the studied region were reached with 66.6 g/L of Kraft lignin and a reaction time of 1.98 h. In conclusion, eco-friendly oleogels obtained in this work fulfil the industrial requirements concerning their rheological properties to be considered as an efficient and biodegradable alternative to traditional lubricants containing lithium as the thickener., We gratefully acknowledge the financial support given by the Spanish Ministry (MINECO) CTQ2014-56038- C3-1R and CTQ2014 56038-C3-2R., Peer reviewed, 6 Pág.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rheology and adhesion performance of adhesives formulated with lignins from agricultural waste straws subjected to solid-state fermentation

  • Borrero-López, Antonio M.
  • Valencia, Concepción
  • Domínguez, Gabriela
  • Eugenio, María E.
  • Franco, José Mariano
8 Pág. Instituto de Ciencias Forestales (ICIFOR), In this study, modified residual lignins from barley and wheat straws submitted to solid-state fermentation with diverse Streptomyces strains were targeted as binders in eco-friendly castor oil-based polyurethane adhesive formulations. The thermo-rheological and adhesion properties of these adhesives were examined and related to the solid-state fermentation yields. Viscoelastic properties were enhanced by lignin addition, and the Streptomyces action generally increased the values of the linear viscoelastic functions. Adhesion performance was dominated by lignin source and further Streptomyces activity and can be correlated with the resulting lignocellulosic composition. Wheat straw lignin-based polyurethane adhesives showed the best performance in metal-textile peeling tests, whereas barley straw lignin provided the best achievements in terms of shear strength in metal-metal and wood-wood joints. Overall, solid-state fermentation with Streptomyces demonstrated to be a suitable pretreatment to conveniently modify and improve residual lignin fractions for application as binders in environmental-friendly polyurethane adhesive formulations., This work was partially funded by two coordinated research MINECO-ERDF projects (CTQ2014-56038-C3-1R and CTQ2014-56038-C3-2R) and the ERDF-Junta de Andalucía 2014-2020 Operational Programme (project UHU-1252599). A.M.B-L. has received a Ph.D. Research Grant from the Ministerio de Educación, Cultura y Deporte (FPU16/03697). The authors gratefully acknowledge the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid-State Fermentation with Streptomyces as an Ecofriendly Route to Tune Lignin Properties and Its Use as a Binder in Adhesive Formulation

  • Blánquez, Alba
  • Borrero-López, Antonio M.
  • Domínguez, Gabriela
  • Valencia, Concepción
  • Molina-Guijarro, José M.
  • Eugenio, María E.
  • Ibarra, David
  • Hernández, Manuel
The herein work analyzes the compositional and structural modification of extracted lignins from both barley and wheat straws biologically pretreated with Streptomyces by solid-state fermentation with two different strains, MDG147 and MDG301. The results showed that the MDG301 strain promoted major lignin solubilization, especially for wheat straw and alkaline extraction, and simultaneously exhibited a higher hydrolytic enzymatic profile than MDG147. Furthermore, the substrates were submitted to soda pulping, and the chemical composition and structural characteristics of the extracted soda-lignins were analyzed by analytical standard methods, Fourier transform infrared spectroscopy, thermogravimetric analysis, and nuclear magnetic resonance. Generally, soda-lignins showed high purity, with the remaining carbohydrate content in agreement with enzymatic patterns. Moreover, Streptomyces strains produced structural modifications, including a major degradation of β-alkyl-aryl ether and C-C linkages of soda-lignins, as well as an enrichment of syringyl units. Furthermore, these modifications also increased the hydroxyl group content, increasing entanglement possibilities and H-bonding. The obtained soda-lignins were focused on as binders for the adhesive formulation, showing excellent adhesion results. Those adhesives based on lignin coming from barley straw exhibited the best performance in shear strength tests, whereas those extracted from wheat straw provided the maximum values in peeling essays., This work is part of two coordinated research projects (CTQ2014-56038-C3-1R and CTQ2014-56038-C3-2R) funded by MINECO. The authors also wish to thank the Comunidad de Madrid for funding this study via Project SUSTEC-CM S2018/EMT- 817 4348. A.M.B.-L. also thanks the Margarita Salas (SOL-RPU-59) grant received. We gratefully acknowledge the financial support., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Valorization of soda lignin from wheat straw solid-state fermentation: Production of oleogels.

  • Borrero López, Antonio María
  • Blánquez Moya, Alba|||0000-0001-9513-6098
  • Valencia Barragán, Concepción
  • Hernández Cutuli, Manuel Pascual|||0000-0002-1430-9952
  • Arias Fernández, María Enriqueta Juana
  • Eugenio Martín, María Eugenia
  • Fillat Latorre, Úrsula
  • Franco Gómez, José María
This work describes the solid-state fermentation(SSF) of wheat straw with Streptomyces sp. MDG147 and further soda-pulping process to obtain wheat straw soda lignins(WSLs). Subsequently, these WSLs were NCO-functionalized with 1,6-hexamethylene diisocyanate and then dispersed in castor oil to achieve stable oleogels. The WSLs were characterized using standard analytical methods, gel permeation chromatography, Fourier transform infrared spectroscopy,differential scanning calorimetry, and thermogravimetric analysis. Rheological properties of oleogels were determinedby means of small-amplitude oscillatory shear and viscous flow measurements. The enzymatic profile and production oflignin−carbohydrate complexes were recorded along the growth time of Streptomyces, whose life cycle was achieved after 7 days. NCO-functionalized WSL was able to chemically interact with castor oil via urethane bonding, providing oleogels with suitable rheological characteristics. Linear viscoelastic functions and viscosity values of oleogels were higher when wheat straw was submitted to SSF using Streptomyces, turning out in stronger oleogels., Ministerio de Economía, Industria y Competitividad