Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 119
Encontrada(s) 2 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Hydraulic Strategies Modulate Forest Productivity Responses to Hotter Droughts

  • Tijerín‐Triviño, Julián
  • Serra‐Maluquer, Xavier
  • García‐Valdés, Raúl
  • Zavala, Miguel Ángel
  • García, Mariano
  • Astigarraga, Julen
  • Cruz Alonso, Verónica
  • Rebollo Orozco, Pedro
  • Gazol, Antonio
  • Rodes‐Blanco, Marina
  • Tanase, Mihai Andrei
  • Ruiz‐Benito, Paloma
Climate change, characterized by an increase in extreme climatic events, poses a significant threat to forest productivity worldwide, potentially compromising its critical role in regulating the global carbon cycle. The response of forest productivity to compound events, such as hotter droughts, can be strongly modulated by functional traits. Forests dominated by acquisitive tree species (prioritizing resource acquisition) may be more vulnerable than forests dominated by conservative species (prioritizing efficiency and stress tolerance). Meanwhile, functional diversity could enhance ecosystem resistance. Although projections indicate that hotter droughts will increasingly hamper forest productivity, most studies focus solely on drought intensity, neglecting duration and frequency. To assess the effects of hotter droughts, we analyzed how their intensity, frequency, and duration influence forest productivity over time, and evaluated the role of functional identity and diversity in modulating forest responses. We analyzed forest productivity from 1985 to 2018 in a Mediterranean region of central Spain using generalized linear mixed models. Our estimates were based on biomass data resulting from integrating LiDAR, multispectral imagery, and forest inventory records from 748 plots. Our results indicated that the negative effects of the increased vapor pressure deficit and drought dimensions on forest productivity have intensified over time. Under extreme drought conditions, forests with higher functional diversity and dominated by moderately conservative species experienced smaller declines in productivity, whereas forests dominated by highly conservative species showed increasingly negative responses. This result may reflect repeated drought effects resulting in long stomatal closure periods and carbon starvation. Our findings highlight the increasing and negative impact of hotter droughts over time on Mediterranean forests. Altogether, the stabilizing role of functional diversity and identity in drought tolerance traits, such as cavitation resistance, should be considered in models addressing long-term climate change impacts on forest mitigation potential.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Forest structural diversity modulates tree growth synchrony in response to climate change

  • Astigarraga, Julen
  • Calatayud, Joaquín
  • Ruiz-Benito, Paloma
  • Madrigal-González, Jaime
  • Tijerín-Triviño, Julián
  • Zavala, Miguel A.
  • Andivia Muñoz, Enrique
  • Herrero, Asier
Following centuries of deforestation, many industrialized countries have experienced an increase in forest area and biomass due to changes in land- and forest-use since the mid-20th century. At the same time, the impacts of climate change on forests are aggravating, but the interplay between past land- and forest-use (i.e. land- and forest-use legacies) and climate change in tree growth remains elusive. Tree growth synchrony, defined as the coincident increase in annual tree growth between different tree individuals over time, represents a comprehensive ecological measure of the level of environmental stress faced by forests, and consequently, can assess forest vulnerability to global change. Here using network theory and generalized linear mixed models, we tested whether tree size heterogeneity, resulting from different land- and forest-use legacies (i.e. recently-established, long-established, recently-pruned pollards and old-pruned pollards), modulated tree growth synchrony in response to heatwaves frequency synchrony between 1970 and 2020. We analyzed tree growth data from European beech (Fagus sylvatica L.) stands with different histories of forest management at the species’ low-latitude margin. We found increased tree growth synchrony under more frequent heatwaves and late spring frosts, and reduced precipitation. Interestingly, tree growth synchrony in response to heatwave frequency was modulated by tree size heterogeneity, with the highest synchrony observed in stands with low tree size heterogeneity, mainly found in recently-established forests. Conversely, stands with high tree size heterogeneity did not show important changes in synchrony with increasing heatwaves frequency. Our results highlight the importance of maintaining structurally diverse forests to mitigate the negative effects of climate change on forest productivity, and thereby, increase forest resilience to future forest climate risks.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Proteomic analysis of endothelial cells and extracellular vesicles in response to indoxyl sulfate: Mechanisms of endothelial dysfunction in chronic kidney disease

  • Figuer, Andrea
  • Santos, Fátima M.
  • Ciordia, Sergio
  • Valera Arévalo, Gemma
  • Martín Jouve, Beatriz
  • Hernández-Fonseca, Juan Pablo
  • Bodega, Guillermo
  • Ceprián, Noemí
  • Ramírez, Rafael
  • Carracedo Añón, Julia María
  • Alique, Matilde
Aims Cardiovascular pathology is the main cause of death in chronic kidney disease (CKD) patients. CKD is associated with the accumulation of uremic toxins in the bloodstream, and indoxyl sulfate (IS) is one of the most abundant uremic toxins found in the blood of CKD patients. We conducted an in vitro study to assess the mechanisms underlying the IS-induced endothelial dysfunction that could lead to cardiovascular diseases. We also studied their extracellular vesicles (EVs) owing to their capacity to act as messengers that transmit signals through their cargo. Main methods EVs were characterized by nanoparticle tracking analysis, transmission electron microscopy, flow cytometry, and tetraspanin expression. Cell lysates and isolated EVs were analyzed using liquid chromatography coupled with mass spectrometry, followed by Gene Set Enrichment Analysis to identify the altered pathways. Key findings Proteomic analysis of endothelial cells revealed that IS causes an increase in proteins related to adipogenesis, inflammation, and xenobiotic metabolism and a decrease in proliferation. Extracellular matrix elements, as well as proteins associated with myogenesis, response to UV irradiation, and inflammation, were found to be downregulated in IS-treated EVs. Fatty acid metabolism was also found to be increased along with adipogenesis and inflammation observed in cells. Significance The treatment of endothelial cells with IS increased the expression of proteins related to adipogenesis, inflammation, and xenobiotic metabolism and was less associated with proliferation. Furthermore, EVs from cells treated with IS may mediate endothelial dysfunction, since they present fewer extracellular matrix elements, myogenesis, inflammatory factors, and proteins downregulated in response to UV radiation.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Mechanistic insight of lysozyme transport through the outer bacteria membrane with dendronized silver nanoparticles for peptidoglycan degradation

  • Skrzyniarz, Kinga
  • Sánchez-Nieves Fernández, Javier|||0000-0003-0410-2285
  • Mata de la Mata, Francisco Javier de la|||0000-0003-0418-3935
  • Lysek-Gladysinska, Malgorzata
  • Lach, Karolina
  • Ciepluch, Karol
Drug resistance has become a global problem, prompting the entire scientific world to seek alternative methods of dealing with resistant pathogens. Among the many alternatives to antibiotics, two appear to be the most promising: membrane permeabilizers and enzymes that destroy bacterial cell walls. Therefore, in this study, we provide insight into the mechanism of lysozyme transport strategies using two types of carbosilane dendronized silver nanoparticles (DendAgNPs), non-polyethylene glycol (PEG)-modified (DendAgNPs) and PEGylated (PEG-DendAgNPs), for outer membrane permeabilization and peptidoglycan degradation. Remarkably, studies have shown that DendAgNPs can build up on the surface of a bacterial cell, destroying the outer membrane, and thereby allowing lysozymes to penetrate inside the bacteria and destroy the cell wall. PEG-DendAgNPs, on the other hand, have a completely different mechanism of action. PEG chains containing a complex lysozyme resulted in bacterial aggregation and an increase in the local enzyme concentration near the bacterial membrane, thereby inhibiting bacterial growth. This is due to the accumulation of the enzyme in one place on the surface of the bacteria and penetration into it through slight damage of the membrane due to interactions of NPs with the membrane. The results of this study will help propel more effective antimicrobial protein nanocarriers., Jan Kochanowski University, Ministerio de Ciencia e Innovación, Comunidad de Madrid, Centro de Investigación Biomédica en Red
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Antimicrobial activity of cationic carbosilane dendrimers against clinical strains of extended-spectrum beta-lactamase producing-Escherichia coli and their biofilms

  • Hernando Gozalo, Marcos|||0000-0003-2838-7270
  • Aguilera Correa, John Jairo
  • Ciepluch, Karol
  • Lach, Karolina
  • Rescalvo Casas, Carlos|||0000-0003-3745-6661
  • Seijas Pereda, Laura
  • Cuadros González, Juan|||0000-0003-4098-4377
  • Gómez Ramírez, Rafael|||0000-0001-6448-2414
  • Pérez Tanoira, Ramón|||0000-0002-9816-3208
  • Sánchez-Nieves Fernández, Javier|||0000-0003-0410-2285
12 p., Antimicrobial resistance (AMR) is a significance public health concern with serious health and socioeconomic consequences. Therefore, multidrug-resistant strains such as extended-spectrum beta-lactamase (ESBL) producing-Enterobacterales are becoming increasingly common and there are few antibiotic options to treat them. Consequently, it is urgent to find new therapeutic compounds, and cationic dendrimers, such as carbosilane (CBS) derivatives, with peripheral ammonium groups are possible candidates for this purpose. The aim of this study was to establish the antimicrobial and biological properties of different cationic CBS dendrimers and dendrons against multiresistant clinical strains of ESBL-producing Escherichia coli. All seven compounds tested were found to be effective in vitro against planktonic forms. The most active compounds inhibited the formation of bacterial biofilms but lacked activity against pre-formed biofilms. These dendrimers differed in their mode of action depending on the structure and the cationic groups, which was analysed by studies with interaction of membrane models. In addition, these four dendritic systems mentioned above showed a good therapeutic margin in the haemolysis assays in vitro and they lacked haemagglutinating properties. In conclusion, some of the compounds tested could be candidates as potential topical antimicrobials or disinfectants against ESBL-producing enterobacteria infections., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Centro de Investigación Biomédica en Red de Bioingeniería, Biomateriales y Nanomedicina, Centro de Investigación Biomédica en Red de Enfermedades Infecciosas, Instituto de Salud Carlos III, Unión Europea, Fundación para la Investigación Biomédica del Hospital Universitario Príncipe de Asturias, National Science Centre (Polonia)
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Copolymerization of beta-butyrolactones into functionalized polyhydroxyalkanoates using aluminum catalysts: influence of the initiator in the ring-opening polymerization mechanism

  • Palenzuela Cebrián, Miguel|||0000-0002-1003-6803
  • Mula Herrero, Esther
  • Blanco, Carlos
  • Sessini , Valentina|||0000-0003-1205-4586
  • Shakaroun, Rama M.
  • Li, Hui
  • Guillaume, Sophie M.
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
14 p., Within bioplastics, natural poly(3-hydroxybutyrate) (PHB) stands out as fully biocompatible and biodegradable, even in marine environments; however, its high isotacticity and crystallinity limits its mechanical properties and hence its applications. PHB can also be synthesized with different tacticities via a catalytic ring-opening polymerization (ROP) of rac-?-butyrolactone (BBL), paving the way to PHB with better thermomechanical and processability properties. In this work, the catalyst family is extended based on aluminum phenoxy-imine methyl catalyst [AlMeL2], that reveals efficient in the ROP of BBL, to the halogeno analogous complex [AlClL2]. As well, the impact on the ROP mechanism of different initiators is further explored with a particular focus in dimethylaminopyridine (DMAP), a hardly studied initiator for the ROP of BBL. A thorough mechanistic study is performed that evidences the presence of two concomitant DMAP-mediated mechanisms, that lead to either a DMAP or a crotonate end-capping group. Besides, in order to increase the possibilities of PHB post-polymerization functionalization, the introduction of a side-chain functionality is explored, establishing the copolymerization of BBL with ?-allyloxymethylene propiolactone (BPLOAll), resulting in well-defined P(BBL-co-BPLOAll) copolymers., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Surface Engineering of Nanomaterials with Polymers, Biomolecules, and Small Ligands for Nanomedicine

  • Díez Pascual, Ana María|||0000-0001-7405-2354
Nanomedicine is a speedily growing area of medical research that is focused on developing nanomaterials for the prevention, diagnosis, and treatment of diseases. Nanomaterials with unique physicochemical properties have recently attracted a lot of attention since they offer a lot of potential in biomedical research. Novel generations of engineered nanostructures, also known as designed and functionalized nanomaterials, have opened up new possibilities in the applications of biomedical approaches such as biological imaging, biomolecular sensing, medical devices, drug delivery, and therapy. Polymers, natural biomolecules, or synthetic ligands can interact physically or chemically with nanomaterials to functionalize them for targeted uses. This paper reviews current research in nanotechnology, with a focus on nanomaterial functionalization for medical applications. Firstly, a brief overview of the different types of nanomaterials and the strategies for their surface functionalization is offered. Secondly, different types of functionalized nanomaterials are reviewed. Then, their potential cytotoxicity and cost-effectiveness are discussed. Finally, their use in diverse fields is examined in detail, including cancer treatment, tissue engineering, drug/gene delivery, and medical implants.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Antibiofilm activity of cationic carbosilane BD132 dendron and its synergistic effect with anphotericin B against Candida spp.

  • Gómez Casanova, Natalia|||0000-0002-6983-1895
  • Copa Patiño, José Luis|||0000-0002-2162-3907
  • Gómez Ramírez, Rafael|||0000-0001-6448-2414
  • Sánchez-Nieves Fernández, Javier|||0000-0003-0410-2285
  • Heredero Bermejo, Irene|||0000-0001-6984-1965
8 p., The BD132 is a cationic carbosilane dendron containing peripheral ammonium groups, which impairs antimicrobial properties, and the chaperone 4-phenylbutyrate, with anti-inflammatory and antibacterial properties. Its in vitro activity was evaluated against biofilm formation and against established biofilms in Candida albicans and Nakaseomyces glabratus (former named Candida glabrata). In addition, the BD132 dendron was used in combination with amphotericin B against both species. Its cytotoxicity was evaluated using HeLa cells. Our data showed that BD132 dendron was an excellent compound that prevented biofilm formation. The Minimum Biofilm Inhibitory Concentration was 16 mg/L for N. glabratus and 32 mg/L for C. albicans, both concentrations were not cytotoxic. Furthermore, in the studies against established biofilms, the dendron was effective eradicating them. Experiments showed that the combination of the dendron with amphotericin B improved the activity of both by reducing the effective concentration of both compounds required to obtain the same results as when used individually. Therefore, the BD132 dendron is a very interesting compound that exhibits low cytotoxicity at active concentrations that prevent the formation of biofilms of these microorganisms. In addition, these results suggest that the BD132 dendron may have great benefits in the development of antifungal agents., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Instituto de Salud Carlos III
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Multimodal estimation of Sine Dwell vibrational responses from aeroelastic Flutter Flight Tests

  • Abou Kebeh, Sami
  • Gil Pita, Roberto|||0000-0002-1790-3834
  • Rosa Zurera, Manuel|||0000-0002-3073-3278
Aircraft envelope expansion during new underwing stores installation is a challenging problem, mainly related to the aeroelastic flutter phenomenon. Aeroelastic models are usually very hard to model, and therefore flight tests are usually required to validate the aeroelastic model predictions, which given the catastrophic consequences of reaching the flutter point pose an important problem. This constraint favors using short time excitations like Sine Dwell to perform the flight tests, so that the aircraft stays close to the flutter point as little time as possible, but short time data implies a poor spectrum resolution and therefore leads to inaccurate and non repetitive results. The present paper will address the problem related to processing Sine Dwell signals from aeroelastic Flutter Flight Tests, characterized by very short data length (less than 5 s) and low frequency (less than 10 Hz) and used to identify the natural modes associated with the structure. In particular, a new robust technique, the PRESTO algorithm, will be presented and compared to a Matching Pursuit estimation based on LaplaceWavelet. Both techniques have demonstrated to be very accurate and robust procedures on very short time (Sine Dwell) signals, with the particularity that the Laplace Wavelet estimation has already been validated over F-18 real Flutter Flight Test data as described in different papers. However, the PRESTO algorithm improves the performance and accuracy of the LaplaceWavelet processing while keeping its robustness, both on real and simulated data., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

LbL Nano-Assemblies: A Versatile Tool for Biomedical and Healthcare Applications

  • Díez Pascual, Ana María|||0000-0001-7405-2354
  • Rahdar, Abbas
Polyelectrolytes (PEs) have been the aim of many research studies over the past years. PE films are prepared by the simple and versatile layer-by-layer (LbL) approach using alternating assemblies of polymer pairs involving a polyanion and a polycation. The adsorption of the alternating PE multiple layers is driven by different forces (i.e., electrostatic interactions, H-bonding, charge transfer interactions, hydrophobic forces, etc.), which enable an accurate control over the physical properties of the film (i.e., thickness at the nanoscale and morphology). These PE nano-assemblies have a wide range of biomedical and healthcare applications, including drug delivery, protein delivery, tissue engineering, wound healing, and so forth. This review provides a concise overview of the most outstanding research on the design and fabrication of PE nanofilms. Their nanostructures, molecular interactions with biomolecules, and applications in the biomedical field are briefly discussed. Finally, the perspectives of further research directions in the development of LbL nano-assemblies for healthcare and medical applications are highlighted.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Assessment of the Refractive Index and Extinction Coefficient of Graphene-Poly(3-hexylthiophene) Nanocomposites

  • Velasco Davoise, Lara|||0000-0002-6608-5938
  • Peña Capilla, Rafael|||0000-0002-7554-2029
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Poly(3-hexylthiophene) (P3HT) is one of the most attractive polymeric donor materials used in organic solar cells because of its high electrical conductivity and solubility in various solvents. However, its carrier mobility is low when compared to that of inorganic semiconductors; hence, the incorporation of appropriate nanomaterials to improve its electrical mobility and optical properties are pursued. In this work, a review of the changes in electrical conductivity, bandgap, hole collection properties and carrier mobility of P3HT when adding graphene (G) is presented. The main aim is to assess how the addition of different G contents influences the optical constants: refractive index (n) and extinction coefficient (k). The values of n and k as a function of the wavelength for six P3HT/G nanocomposites with G loadings in the range of 0.1-5 wt% have been fitted to two different models, Forouhi Bloomer and Cauchy, showing very good agreement between the experimental and the theoretical values. Furthermore, a rule of mixtures was successfully applied to calculate n using mass fraction instead of volume fraction, with errors lower than 6% for all the nanocomposites studied.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Optimization of electrocoagulation process for treatment of rice mill effluent using response surface methodology

  • Anuf, Ronaldo
  • Sankar Sivasankarapillai, Vishnu
  • Maran, Prakash
  • Kumar, Rajesh
  • Dhanusuraman, Ragupathy
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
The present work explores the impact of electro coagulation (EC) method on the treatment of waste from rice mill industries using two different electrode materials (Iron (Fe) and Aluminum (Al)). The influence of different parameters such as inter-electrode distance (4-7 cm), effluent pH (6-8), current density (10-30 mA/cm2) and treatment time (20-40 min) on the reduction of chemical oxygen demand (COD), total dissolved solids (TDS) and total soluble solids (TSS) of rice mill effluent (RME) was evaluated through batch experimental runs using BoxBehnken design. Results reveal that the percentage removal of COD, TDS and TSS increased up to an interelectrode distance of 6 cm, pH of 7, current density of 20 mA/cm2 and treatment time of 30 min and then decreased for both electrodes. In addition, mathematical models were developed for both electrodes in order to predict the experimental data. A numerical optimization method was applied to find out the optimal operating parameters to treat RME, and the percentage removal of COD, TDS and TSS was found to be 94.79, 96.62 and 88.76 %, using the Al electrode, as well as 76.63, 78.51 and 72.03 %, for the Fe electrode, respectively. The comparison of the results attained demonstrate that the Al electrode is more suitable to treat RME than Fe using EC method., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Surface functionalization of graphene oxide with tannic acid: Covalent vs non-covalent approaches

  • Sainz Urruela, Carlos|||0000-0003-3228-2324
  • Vera López, María Soledad|||0000-0001-8626-0556
  • San Andrés Lledó, María Paz|||0000-0002-1500-4528
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Graphene oxide (GO) is gaining a lot of interest in material science, biomedicine and biotechnology due to its outstanding physical properties, combined with its surface functionalization capacity, processability in aqueous media and biocompatibility. However, van der Waals forces among GO layers result in aggre-gation, yet its dispersion, large-scale production, and reinforcing efficiency remain challenging. Herein, simple and environmentally friendly methods via covalent and non-covalent routes have been developed to exfoliate and prepare surface-functionalized GO nanosheets with tannic acid (TA), a biological macro-molecule with antioxidant activity. Four esterification strategies were tested: direct, carbodiimide acti-vated, oxalyl chloride acylation and via an acid-functionalized GO intermediate. The resulting samples have been extensively characterized to get knowledge on the GO-TA interactions and the degree of graft-ing, as well as their surface topography, level of hydrophilicity, solubility/dispersibility, thermal and antibacterial properties. The covalent grafting of TA renders the GO surface more hydrophobic, resulting in improved dispersion in organic solvents. Besides, TA acts as a crosslinker between the GO nanosheets, leading to higher thermal resistance. A synergistic effect of both GO and TA on inhibiting bacterial growth has also been found. The esterification via carbodiimide leads to the highest grafting degree, the best thermal stability and the most effective antibacterial activity. This work not only highlights the great potential of TA for both exfoliation and surface functionalization of GO, but also extends its applications in biomedicine and for the development of green nanocomposites. (c) 2022 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Bio-based poly(ethylene brassylate) as a sustainable high-performance thermoplastic: Insights into its crystalline morphology, mechanical properties and rheology

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Sotillo, Alberto
  • Souza Egipsy, Virginia
  • Vega, Juan F
  • Sessini , Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
14 p., High-molecular-weight poly(ethylene brassylate) (PEB), a biobased and biodegradable polyester, was synthesized via ring-opening polymerization of ethylene brassylate using a highly active sodium phenoxide catalyst. Reaction conditions were optimized to achieve full monomer conversion and molecular weights up to 600 kDa. A comprehensive characterization has been performed that evidence the strong influence of the molecular weight in the thermal, mechanical, and rheological properties. Differential scanning calorimetry and WAXS confirmed a semicrystalline structure with multiple melting peaks and decreasing crystallinity as molecular weight increased. Mechanical testing revealed a transition from polyethylene-like behavior to a highly ductile, high-strain response in high-Mw samples, characterized by exceptional extensibility profile. Rheological analysis provided evidence of long-chain branching in polymers prepared without coinitiator, significantly affecting the viscoelastic response and extensional flow. These findings highlight PEB as a promising sustainable alternative to conventional polyolefins, combining favorable thermal stability, tunable mechanical properties, and processability for advanced applications such as packaging, 3D printing, and shape-memory materials., Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional, Unión Europea, CSIC, Consejo Superior de Investigaciones Científicas, Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Enhancing Polyphenol Delivery and Efficacy Using Functionalized Gold Nanoparticles: Antioxidant and Antibacterial Properties

  • Bouaouz Idrissi, Siham|||0000-0002-0640-9822
  • Chávez Peraza, Miriam|||0000-0002-5512-7485
  • Peña González, Cornelia E.
  • Rojas Tizón, José Daniel|||0000-0002-4404-4668
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
  • Ortega Lopez, Paula|||0000-0003-0377-5429
  • Mata de la Mata, Francisco Javier de la|||0000-0003-0418-3935
Research into the use of nanoparticles to enhance the delivery and efficacy of polyphenols is a topic of growing interest in the fields of nanotechnology, pharmacology and food science. Nanoparticles, due to their small size and high surface area, can improve the stability, solubility and bioavailability of polyphenols. Combining polyphenols with other bioactive compounds within nanoparticles can create synergistic effects, enhancing their overall therapeutic potential. In this work, we present a new polyethylene glycol (PEG) capping ligand modified with caffeic acid (CA), HS-PEG-CA and two types of gold nanoparticles: (i) coated with a PEG-thiol derivative functionalized with CA (HS-PEG-CA) (homofuncionalized NP) and (ii) HS-PEG-CA cationic carbosilane dendrons with antibacterial properties (heterofuncionalized NP). The antioxidant capacity of the CA, in three systems, has been studied by different techniques such as FRAP, DDPH and cyclic voltammetry, demonstrating that it is preserved when it is supported on the NP and increases when it is part of the PEG ligand. In addition, heterofuntionalized NP showed activity against S. aureus and HS-PEG2K-CA ligand can effectively anchor to gold substrates., Ministerio de Ciencia e Innovación, Junta de Comunidades de Castilla-La Mancha, Comunidad de Madrid, Universidad de Alcalá, Instituto de Salud Carlos III
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Historic land use modifies impacts of climate and isolation in rear edge european beech (Fagus sylvatica L.) populations

  • Rhoades, Jazz
  • Vilà Cabrera, Albert
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
  • Bullock, James M.
  • Jump, Alistair S.
  • Chapman, Daniel
14 p., Legacies of human land use have the potential to impact demographic responses to climate. However, few studies have investigated the interactive effects of land use legacies and climate change on tree demography. The demographic performance of rear edge populations in particular is an important determinant of a species' long-term persistence. In this study, we investigated whether human land use legacies affect demographic responses to climate and population isolation in rear edge European beech populations (Fagus sylvatica L.) at the temperate-Mediterranean transition zone in the NE Iberian Peninsula. We utilised data from the Spanish Forest Inventory and generalised linear mixed models to compare the potential interactions across four different demographic rates (tree growth, survival probability, new adult recruitment and sapling recruitment). We found that the demographic rates were affected by the combination of land use legacies, climate and population isolation in different ways, which could potentially lead to complex shifts in future population dynamics under climate change. We identified that intense historic management either magnified negative relationships between tree demography and climate or population isolation, or reduced demographic performance in favourable climates to levels observed in unfavourable climates. Through either form of interaction, we found that intense historic forest management had a negative impact on tree demography, which has the potential to compromise future carbon stocks and long-term population viability. Overall, we show that disentangling human and environmental factors can enable us to better understand heterogeneous demographic performance across the rear edge of species distributions., University of Stirling, Natural Environment Research Council (NERC, UK), Scottish Alliance for Geoscience, Environment and Society (Scotland), UK Centre for Ecology & Hydrology (UKCEH, UK), Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Imagining emotions in storyworlds: physiological narrated perception and emotional mental imagery

  • Martínez, María-Ángeles|||0000-0001-6473-1249
Research into narrative experiencing acknowledges the role played by mental imagery in readers’ emotional responses and feelings of embodiment. In narratives, mental imagery is frequently evoked through narrated perception, or the textual presentation of sensory perception, as in “The silence in the house was complete”. Narrated perception spans the five senses – sight, hearing, smell, touch, and taste; however, little attention has been paid to the narrated description of characters’ basic physiological processes, that is, those connected to the invisible systems – respiratory, digestive, cardio-vascular, muscular – and their relevance to the mental construction of narrative emotions. This study explores the presentation of fictional characters’ physiological processes as a prompt for readers’ embodied experience of storyworlds through the metonymic activation of self-relevant emotion schemata. To this purpose, the presentation of characters’ internal physiological processes in two fictional samples of similar length – Rosemary Timperley’s 1955 ghost story “Harry” and chapter one in Ewan McEwan’s 2002 novel Atonement – is analysed. The findings suggests that these descriptions enrich the imagined nature of narrative emotions through underspecification, and increase opportunities for perceived self-relevance and engagement., Agencia Estatal de Investigación, Comunidad de Madrid. Dirección General de Patrimonio Histórico
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Graphene-Based Polymer Composites for Flexible Electronic Applications

  • Díez Pascual, Ana María|||0000-0001-7405-2354
  • Rahdar, Abbas
Graphene-based nanomaterials have gained a lot of interest over the last years in flexible electronics due to their exceptional electrical, mechanical, and optoelectronic properties, as well as their potential of surface modification. Their flexibility and processability make them suitable for electronic devices that require bending, folding, and stretching, which cannot be fulfilled by conventional electronics. These nanomaterials can be assembled with various types of organic materials, including polymers, and biomolecules, to generate a variety of nanocomposites with greater stretchability and healability, higher stiffness, electrical conductivity, and exceptional thermal stability for flexible lighting and display technologies. This article summarizes the main characteristics and synthesis methods of graphene, its oxidized form graphene oxide (GO), and reduced GO derivative, as well as their corresponding polymeric composites, and provides a brief overview about some recent examples of these nanocomposites in flexible electronic applications, including electrodes for solar cells and supercapacitors, electronic textiles, and transistors.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Playing with biological selectivity: Antimicrobial peptides and bacteriophages-based optical biosensors for pathogenic bacteria detection

  • Cuntín Abal, Carmen|||0000-0001-5713-0971
  • Jurado Sánchez, Beatriz|||0000-0002-6584-1949
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
Bacteria monitoring is of paramount significance for healthcare systems worldwide and to assess food or water quality monitoring. In this review, advances during the last 10 years in optical biosensors based on antimicrobial peptides and bacteriophages for bacteria detection are described. Such probes possess high stability which allows for chemical and other modification for highly directed selectivity towards specific bacteria and strain differentiation. The main applications described ranged from clinical diagnosis to food/water quality monitoring as potential vehicles for potential bacterial infections in humans. A brief overview of the advantages and drawbacks of each biosensor for the targeted applications is also given. The high stability and potential for tailored functionalization of antimicrobial peptides and bacteriophages hold considerable promise for the development of the next generation of optical biosensors., Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Forensic approach for distinguishing species and sex of multispecies bloodstains in soil and sand by vibrational spectroscopy

  • Cano Trujillo, Cristina Pilar|||0000-0002-9587-4514
  • Montalvo García, Gemma|||0000-0002-5640-8908
  • García Ruiz, Carmen|||0000-0001-5925-3449
  • Toledo González, Victor Antonio|||0000-0001-9446-5543
12 p., Bloodstains found at a crime scene must be accurately identified to correctly interpret the forensic context and events. Bloodstains (human or animal) sometimes appear on complex substrates such as sand or soil, which complicates their collection and analysis. Traditional presumptive tests for human blood may yield false positives in the presence of animal blood. This limitation, together with the need to preserve small stains, has motivated the use of non-destructive analytical techniques, such as vibrational spectroscopy. The aim of this work was to explore the combined use of ATR-FTIR, Raman microspectroscopy, and chemometrics for detecting and identifying human, dog, and cat bloodstains on sand and soil. ATR-FTIR and Raman spectral data were used to construct orthogonal partial least squares-discriminant analysis (OPLS-DA) models to assist in differentiation. In general, ATR-FTIR spectra combined with OPLS-DA demonstrated superior species discrimination capabilities compared with Raman spectra. Sex discrimination was further investigated using both datasets. However, the discriminatory performance of Raman spectroscopy was limited. These results highlight the potential of vibrational spectroscopy combined with chemometrics as a non-destructive approach for differentiating multispecies bloodstains on complex substrates. However, given the small number of donors included in this study, the findings should be considered preliminary, and further studies with larger sample sets are needed to confirm and extend these observations., University Institute of Research in Police Sciences, Unión Europea, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Neural networks for operational SYM-H forecasting using attention and SWICS plasma features

  • Collado Villaverde, Armando
  • Muñoz Martínez, Pablo|||0000-0003-0581-5383
  • Cid Tortuero, Consuelo|||0000-0002-2863-3745
In this work, we present an Artificial Neural Network for operational forecasting of the SYM-H geomagnetic index up to 2 hr ahead using the Interplanetary Magnetic Field, the solar wind plasma features and previous SYM-H values. Former works that forecast the SYM-H index use data measured by ACE, in particular from the MAG and SWEPAM instruments. However, the plasma data present a high amount of missing samples. This issue has been addressed in the literature, often using linear interpolation, which leads to a non-accurate data reconstruction, specially when the features are missing during the most intense periods of a geomagnetic storm. To overcome that issue, we use ACE's Solar Wind Ion Composition Spectrometer (SWICS) data to fill the missing plasma features. To validate this technique, we compare the results of our forecasting model trained using plasma features in two ways: only using SWEPAM and performing linear interpolation and using SWICS to fill the missing values in SWEPAM. Then, both models are evaluated in an operational scenario, when only SWEPAM data are available and interpolation can only be performed if the missing values are surrounded by valid measurements. In both cases, our model outperforms the current literature forecasting the SYM-H one and 2 hr ahead, yielding the best results when the training has been done using the data completed using SWICS measurements., European Space Agency, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fabrication and in vitro evaluation of chitosan-gelatin based aceclofenac loaded scaffold

  • Khan Tareen, Fahad
  • Ullah Khan, Atif
  • Farhan Ali Khan, Muhammad
  • Ullah Shah, Kifayat
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Scaffold development is a nascent field in drug development. The scaffolds mimic the innate microenvironment of the body. The goal of this study was to formulate a biocompatible and biodegradable scaffold, loaded with an analgesic drug, aceclofenac (Ace). The bioscaffold is aimed to have optimum mechanical strength and rheology, with drug released in a sustained manner. It was prepared via chemical cross-linking method: a chitosan (CS) solution was prepared and loaded with Ace; gelatin (GEL) was added and the mixture was cross-linked to get a hydrogel. 20 formulations were prepared to optimize different parameters including the stirring speed, drug injection rate and crosslinker volume. The optimal formulation was selected based on the viscosity, drug solubility, homogeneity, porosity and swelling index. A very high porosity and swelling index were attained. In vitro release data showed sustained drug delivery, with effective release at physiological and slightly acidic pH. SEM analysis revealed a homogeneous microstructure with highly interconnected pores within an extended polymer matrix. FT-IR spectra confirmed the absence of polymer-drug interactions, XRD provided evidences for efficient drug entrapment within the scaffold. Rheological analysis corroborated the scaffold injectability. Mathematical models were applied to in-vitro data, and the best fit was attained with Korsmeyer-Peppas., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Potential anti-adhesion activity of novel carbosilane zwitterionic dendrimers against eukaryotic and prokaryotic pathogenic microorganisms

  • Gómez Casanova, Natalia|||0000-0002-6983-1895
  • Martín-Serrano Ortiz, Ángela|||0000-0002-2908-8910
  • Heredero Bermejo, Irene|||0000-0001-6984-1965
  • Sánchez-Nieves Fernández, Javier|||0000-0003-0410-2285
  • Copa Patiño, José Luis|||0000-0002-2162-3907
  • Mata de la Mata, Francisco Javier de la|||0000-0003-0418-3935
The development of biofilms on different surfaces continues to be a major public health problem. The antimicrobial resistance and the difficulty of finding drugs capable of combating these established biofilms generates the urgent need to find compounds that prevent cells from settling and establishing of these complex communities of microorganisms. Zwitterionic modification of nanomaterials allows the formation of a hydration layer, and this highly hydrophilic surface provides antifouling properties as well as a good biocompatibility by preventing non-specific interactions. Thus, they are appropriate candidates to prevent microbial adhesion to different surfaces and, in consequence, avoid biofilm formation. For this reason, we have incorporated zwitterionic moieties in multivalent systems, as are carbosilane dendrimers. Characterization of these systems was performed using nuclear magnetic resonance and mass spectrometry. It has been analysed if the new molecules have capacity to inhibit the biofilm formation in Candida albicans, Staphylococcus aureus and Pseudomonas aeruginosa. The results showed that they were more effective against S. aureus, observing a biofilm reduction of 81.5% treating with 32 mg/L of G2SiZWsf dendrimer and by 72.5% using 32 mg/L of the G3SiZWsf dendrimer. Finally, the absence of cytotoxicity was verified by haemolysis and cytotoxicity studies in human cells lines., Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Spain, Ministerio de Economía, Comercio y Empresa, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Introducing the ReaLISED dataset for sound event classification

  • Mohíno Herranz, María Inmaculada|||0000-0002-5144-3472
  • García Gómez, Joaquín
  • Aguilar Ortega, Miguel|||0000-0002-4661-7917
  • Utrilla Manso, Manuel|||0000-0003-2930-6049
  • Gil Pita, Roberto|||0000-0002-1790-3834
  • Rosa Zurera, Manuel|||0000-0002-3073-3278
This paper presents the Real-Life Indoor Sound Event Dataset (ReaLISED), a new database which has been developed to contribute to the scientific advance by providing a large amount of real labeled indoor audio event recordings. They offer the scientific community the possibility of testing Sound Event Classification (SEC) algorithms. The full set is made up of 2479 sound clips of 18 different events, which were recorded following a precise recording process described along the proposal. This, together with a described way of testing the similarity of new audio, makes the dataset scalable and opens up the door to its future growth, if desired by the researchers. The full set presents a good balance in terms of the number of recordings of each type of event, which is a desirable characteristic of any dataset. Conversely, the main limitation of the provided data is that all the audio is recorded in indoor environments, which was the aim behind this development. To test the quality of the dataset, both the intraclass and the interclass similarities were evaluated. The first has been studied through the calculation of the intraclass Pearson correlation coefficient and further discard of redundant audio, while the second one has been evaluated with the creation, training and testing of different classifiers: linear and quadratic discriminants, k-Nearest Neighbors (kNN), Support Vector Machines (SVM), Multilayer Perceptron (MLP), and Deep Neural Networks (DNN). Firstly, experiments were carried out over the entire dataset, and later over three different groups (impulsive sounds, non-impulsive sounds, and appliances) composed of six classes according to the results from the entire dataset. This clustering shows the usefulness of following a two-step classification process., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A greener process for poly-L-lactic acid production and chemical upcycling under mild conditions using highly active alkali-metal based catalysts

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Gaeta, Licia
  • Palenzuela Cebrián, Miguel|||0000-0002-1003-6803
  • Sessini , Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
12 p., Non-toxic potassium and sodium metal compounds have been prepared with a bulky aryloxide ligand MOR (1,2), as well, their counterparts containing a crown ether bonded to the alkali metal (3, 4), and fully characterized. The activity of compounds 1?4 as catalysts for the ring-opening polymerization (ROP) process of LLA have been studied, showing that they are extremely active and able to polymerize LLA within a few minutes under mild conditions, achieving PLLA with high molecular weight, similar to the commercial ones. For derivatives 3 and 4, the crown ether coordination to the alkali metal affects the nuclearity of the compounds and consequently its activity, giving a more controlled polymerization. As well the use of BnOH as co-initiator allowed a better control over the polymerization. Detailed studies of the polymerization mechanism have been performed, which confirmed an anionic mechanism in absence of a co-initiator. Furthermore, the nature of the mechanisms provokes the epimerization of the lactide and the existence of D-isomers in the PLLA. Since the percentage of Disomer content in the polymeric chain as well as its distribution can strongly change the properties of PLLA a detailed analysis has been performed. As expected, the different isotacticity leads to a strong variation on the thermal properties. We have also compared the mechanical properties of the different synthetized PLLA, and we clearly observed that the epimerization reactions lead to an increase of the PLLA flexibility compared with commercial PLAs. Furthermore, the alkali metal compounds prepared not only polymerize, as well in the presence of an alcohol they can depolymerized PLLA within 15 min to give alkyl lactates, allowing the easy upcycling of commercial PLLAs., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Role of α and δ' phases in the piezoelectric response of in situ poled electrospun ferroelectric polyamide 11 fibers

  • Leonés Gil, Adrián Luis
  • Pascual González, Cristina
  • Amorín, Harvey
  • Fernández Blázquez, Juan P.
  • Algueró, Miguel
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
15 p., In situ poling of amine dipoles in ferroelectric polyamide 11 (PA11) fibers directly obtained from electrospinning is demonstrated. The combined effect of thermal treatments and mechanical stretching on the crystalline phases and the crystals orientation in the electrospun fibers has been studied. The electrospun PA11 fibers exhibited oriented alpha and & ouml;' phases with Hermans orientation factor, fc, of 0.40 and 0.42, both contributing to the piezoelectric response under transverse mechanical stress (d31 of 0.17 pC/N). Enhanced piezoelectric response was obtained when the PA11 sample was stretched at 15 % of strain ratio, that corresponds to its yield point. Once PA11 transits from elastic to plastic regime, an increase in the degree of crystallinity is observed (Xc of 24.9 %), along with a transition from the triclinic phase (alpha) to the pseudo-hexagonal phase (& ouml;'). The piezoelectric response was significantly increased once the material exceeded its yield point, at which a large piezoelectric coefficient d33 of 0.37 pC/N had resulted. Thermal treatment at 100 degrees C of PA11 fibers also resulted in preferential crystallographic orientation alpha and of & ouml;' phase (fc of 0.47 and 0.44), which is favoured by both mechanical stretching and heat treatment. These findings reveal the strong correlation between the mechanical and thermal treatment, crystalline phases and piezoelectric performance of in situ poled electrospun PA11 fibers., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Five years of EVClub-from journal club to worldwide discussion hub

  • Alique Aguilar, Matilde|||0000-0002-7912-1133
  • Driedonks, Tom
  • Torrecilhas, Ana Claudia
  • Witwer, Kenneth W.
5 p., Instituto de Salud Carlos III, Universidad de Alcalá, Fondos Europeos de Desarrollo Regional, Fundação de Amparo à Pesquisa do Estado de São Paulo, Conselho Nacional de Desenvolvimento Científico e Tecnológico, US National Institutes of Health, Allen Frontiers Foundation, Richman Family Precision Medicine Center
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Interplanetary signatures during the 1972 early August solar storms

  • Cid Tortuero, Consuelo|||0000-0002-2863-3745
  • Saiz Villanueva, María Elena|||0000-0001-7878-9476
  • Flores Soriano, Manuel|||0000-0003-2958-5949
  • Knipp, Delores J.
In 1972, early August, a series of interplanetary shocks were observed in the heliosphere from 0.8 to 2.2 au. These shocks were attributed to a series of brilliant flares and plasma clouds since at that time coronal mass ejections (CMEs) and their interplanetary counterparts (ICMEs) were unknown to the scientific community. This paper aims to reinterpret the interplanetary data in light of the current understanding about interplanetary transients and to track the evolution of the ICMEs, taking advantage of the alignment of Pioneers 9 and 10 spacecraft. For this purpose, we reanalyze in situ data from these two Pioneers and also from Heos, Prognoz 1 and 2, and Explorer 41 spacecraft searching for ICMEs and high-speed streams. Then we assemble the interplanetary transients and solar activity and analyze the propagation of the ejections through the heliosphere. The evolution of four ICMEs and a high-speed stream from a low-latitude coronal hole is followed using the multipoint in situ observations. The first three ICMEs show clear signatures of ICME–ICME interaction in the interplanetary medium, suggesting the first observations of an ICME which developed into an ICME-in-the-sheath. For a non-perturbed ICME event, we obtain the evolution parameter, ζ, related to the local expansion of ICMEs, getting similar values for Pioneer 9 (ζ = 0.80) and Pioneer 10 (ζ = 0.78). These results support previous findings of ζ being independent of the heliocentric distance and the magnetic field strength decreasing as r−2ζ., Agencia Estatal de Investigación, Universidad de Alcalá, Air Force Office of Scientific Research, National Science Foundation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Age group classification and gender recognition from speech with temporal convolutional neural networks

  • Sánchez Hevia, Héctor Adrián|||0000-0002-1519-0447
  • Gil Pita, Roberto|||0000-0002-1790-3834
  • Utrilla Manso, Manuel|||0000-0003-2930-6049
  • Rosa Zurera, Manuel|||0000-0002-3073-3278
This paper analyses the performance of different types of Deep Neural Networks to jointly estimate age and identify gender from speech, to be applied in Interactive Voice Response systems available in call centres. Deep Neural Networks are used, because they have recently demonstrated discriminative and representation capabilities in a wide range of applications, including speech processing problems based on feature extraction and selection. Networks with different sizes are analysed to obtain information on how performance depends on the network architecture and the number of free parameters. The speech corpus used for the experiments is Mozilla?s Common Voice dataset, an open and crowdsourced speech corpus. The results are really good for gender classification, independently of the type of neural network, but improve with the network size. Regarding the classification by age groups, the combination of convolutional neural networks and temporal neural networks seems to be the best option among the analysed, and again, the larger the size of the network, the better the results. The results are promising for use in IVR systems, with the best systems achieving a gender identification error of less than 2% and a classification error by age group of less than 20%., Ministerio de Economía, Industria y Competitividad, Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Mapping forest canopy fuel parameters at European scale using spaceborne LiDAR and satellite data

  • Aragoneses de la Rubia, Elena|||0000-0003-2651-7561
  • García Alonso, Mariano|||0000-0001-6260-5791
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
  • Chuvieco Salinero, Emilio|||0000-0001-5618-4759
Spatially explicit data on forest canopy fuel parameters provide critical information for wildfire propagation modelling, emission estimations and risk assessment. LiDAR observations enable accurate retrieval of the vertical structure of vegetation, which makes them an excellent alternative for characterising forest fuel structures. In most cases, fuel parameterisation has been based on Airborne Laser Scanning (ALS) observations, which are costly and best suited for local research. Spaceborne LiDAR acquisitions overcome the limited spatiotemporal coverage of airborne systems, as they can cover much wider geographical areas. However, they do not provide continuous geographical data, requiring spatial interpolation methods to obtain wall-to-wall information. We developed a two-step, easily replicable methodology to estimate forest canopy fuel parameters for the entire European territory, based on data from the Global Ecosystem Dynamics Investigation (GEDI) sensor, onboard the International Space Station (ISS). First, we simulated GEDI pseudo-waveforms from discrete ALS data about forest plots. We then used metrics derived from the GEDI pseudo-waveforms to estimate mean canopy height (Hm), canopy cover (CC) and canopy base height (CBH), for which we used national forest inventory data as reference. The RH80 metric had the strongest correlation with Hm for all fuel types (r = 0.96?0.97, Bias = ?0.16-0.30 m, RMSE = 1.53?2.52 m, rRMSE = 13.23?19.75%). A strong correlation was also observed between ALS-CC and GEDI-CC (r = 0.94, Bias = ?0.02, RMSE = 0.09, rRMSE = 16.26%), whereas weaker correlations were obtained for CBH estimations based on forest inventory data (r = 0.46, Bias = 0 m, RMSE = 0.89 m, rRMSE = 39.80%). The second stage was to generate wall-to-wall maps for the continent of Europe of canopy fuel parameters at a resolution of 1 km using a spatial interpolation of GEDI-based estimates for within-fuel polygons covered by GEDI footprints. GEDI observations were not available for some of the polygons (mainly Northern latitudes, above 51.6°N). In these cases, the parameters were estimated using random forest regression models based on multispectral and SAR imagery and biophysical variables. Errors were higher than from direct GEDI retrievals, but still within the range of previous results (r = 0.72?0.82, Bias = ?0.18-0.29 m, RMSE = 3.63?4.18 m and rRMSE = 28.43?30.66% for Hm; r = 0.82?0.91, Bias = 0, RMSE = 0.07?0.09 and rRMSE = 10.65?14.42% for CC; r = 0.62?0.75, Bias = 0.01?0.02 m, RMSE = 0.60?0.74 m and rRMSE = 19.16?22.93% for CBH). Uncertainty maps for the estimated parameters were provided at the grid level, for which purpose we considered the propagation of individual errors for each step in the methodology. The final outputs, which are publicly available (https://doi.org/10.21950/KTALA8), provide a wall-to-wall estimation for the continent of Europe of three critical parameters for modelling crown fire propagation potential and demonstrate the capacity of GEDI observations to improve the characterisation of fuel models., Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Efficient multichannel detection of impulsive audio events for wireless networks

  • Sánchez Hevia, Héctor Adrián|||0000-0002-1519-0447
  • Gil Pita, Roberto|||0000-0002-1790-3834
  • Rosa Zurera, Manuel|||0000-0002-3073-3278
Impulsive audio events such as gunshots, explosions or glass shattering, are commonly associated with security threats, thus they are of particular interest for automated acoustic surveillance. Even though impulsive audio events are greatly influenced by their propagation path, little work has been done in multichannel detection, and most precedents available in the literature deal with single-channel detection systems. Unfortunately, the spatial dependence of impulsive sound recordings proves as a problem for robust performance under real conditions. It is possible, however, to take advantage of the spatial diversity provided by a wireless sensor network to counteract this problem. In this paper, we show how an ensemble of spatially diverse detectors can greatly improve the performance of the system. We propose an efficient multichannel detection system of impulsive audio events intended for lowcost Wireless Acoustic Sensor Networks. Our proposal is based on a low complexity classification algorithm and an efficient method to include temporal context into the feature vector. The obtained results show that the proposed detection system is capable of achieving a more than adequate performance without incurring large computational loads., Ministerio de Economía, Industria y Competitividad, Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Differential aridity-induced variations in ecosystem multifunctionality between Iberian Pinus and Quercus Mediterranean forests

  • Crespo Bastias, Cristina
  • Rodríguez Castilla, Ginés
  • Salazar Zarzosa, Pablo
  • Díaz Herraiz, Aurelio
  • González Herranz, Nuria
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
  • Barrón López de la Torre, Vidal
  • Quero Pérez, José Luis
  • Villar Montero, Rafael
14 p., Forests deliver multiple ecosystem functions and services (i.e. multifunctionality) of great importance to society. However, such multifunctionality capacity is threatened by global warming, especially in Mediterranean forests, which are at high risk of desertification according to climate projections. Certain studies suggest that rising aridity could drastically reduce ecosystem multifunctionality. Yet, the application of this pattern to forests remains uncertain due to their inherent structural complexity and the critical influence of species identity, which make the aridity-multifunctionality relationship not straightforward. Here, we studied 56 plots dominated by four key Mediterranean tree species from Pinus and Quercus genus (Pinus halepensis Mill., Pinus pinaster Ait., Quercus faginea Lam., Quercus ilex L.) along aridity gradients. In each plot, we measured ten ecosystem functions (EFs) such as primary productivity, forest regeneration, biodiversity, decomposition, and nutrient cycling. From these EFs, we assessed shifts in both single-EF and multifunctionality (calculated from averaging and multivariate approaches) across aridity gradients. Our findings indicated that while Pinus forests significatively suffer a multifunctionality loss with increasing aridity, Quercus-dominated forests showed fluctuations in multifunctionality across aridity levels. Forest productivity emerged as a key driver shaping the negative multifunctionality-aridity relationship in Pinus forests. However, the effect of primary productivity was not always synergistic with other ecosystem functions as it has been often assumed and its exclusion from the multifunctionality index calculation did not change the overall pattern of a decrease of ecosystem multifunctionality with aridity. Moreover, a notable loss of ecosystem functional covariation (i.e. interactions between EFs) was found with aridity, more pronounced in Pinus than in Quercus. The contrasting aridity-driven responses in multifunctionality and their EFs interactions between Pinus vs. Quercus forests highlight the fact that distinct management strategies will have to be employed to face climate change and ensure the capacity of these fragile forests to provide essential ecosystem services., Junta de Andalucía, Ministerio de Ciencia e Innovación, Universidad de Córdoba, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Conflicting narratives: the otherness within expressionist approaches to the Golem vs Cynthia Ozick's affirmation of the myth's Jewishness

  • Fernández Gil, María Jesús|||0000-0001-8813-6401
Gustav Meyrink's novel "Der Golem" (1915), which was accompanied by illustrations by Hugo Steiner-Prag, and Paul Wegener's silent expressionist film (1920) garnered so much critical and audience attention for their treatment of the golem that they soon became a paradigm for future versions of the legendary Jewish clay man. Cynthia Ozick can be counted among the group of writers that have participated in the recent cultural resurgence of this figure. While it seems unlikely that "Puttermesser and Xanthippe" (1997) is a direct response to early twentieth-century approaches to the golem, it is possible to argue that the golemic creature fashioned by this Jewish-American writer offers a counternarrative to these works, where the golem's clearly demarcated cultural and ethnic origins were subverted. More specifically, her ultimate goal is to restore the myth's Jewishness. The conclusion is that the original myth is selectively transformed in all cases to make it fit a specific historical and sociocultural framework., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Advanced Carbon-Based Polymeric Nanocomposites for Forensic Analysis

  • Díez Pascual, Ana María|||0000-0001-7405-2354
  • Lechuga Cruz, Daniel
  • Lomas Redondo, Alba
Nanotechnology is a powerful tool and fast-growing research area in many novel arenas, ranging from biomedicine to engineering and energy storage. Nanotechnology has great potential to make a significant positive contribution in forensic science, which deals with the identification and investigation of crimes, finding relationships between pieces of evidence and perpetrators. Nano-forensics is related to the development of nanosensors for crime investigations and inspection of terrorist activity by analyzing the presence of illicit drugs, explosives, toxic gases, biological agents, and so forth. In this regard, carbon nanomaterials have huge potential for next-generation nanosensors due to their outstanding properties, including strength combined with flexibility, large specific surface area, high electrical conductivity, and little noise. Moreover, their combination with polymers can provide nanocomposites with novel and enhanced performance owed to synergy between the composite components. This review concisely recapitulates up-to-date advances in the development of polymer composites incorporating carbon-based nanomaterials for forensic science. The properties of the different carbon nanomaterials, several methods used to analyze functional polymeric nanocomposites, and their applications in forensic investigation are discussed. Furthermore, present challenges and forthcoming outlooks on the design of new polymer/carbon nanomaterial composites for crime prevention are highlighted., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Transcultural engagement with Holocaust memory in Spain: a one-way process?

  • Fernández Gil, María Jesús|||0000-0001-8813-6401
  • Palomares Martín, Nagore
The Holocaust, whose symbolic value transcends the event"s spatial and temporal boundaries, is a paradigmatic example of the ways in which translation can critically contribute to bolstering the transcultural, transgenerational, transmedia and transdisciplinary dimensions of memory. It is precisely through translation that the Holocaust has become a global milestone to look back on. The English translation of Anne Frank's diary, published in 1952, is a notorious example of such processes. Spain was among the European countries which accessed Anne Frank's story through the translation of the Americanised play and film versions of the diary in the late 1950s. In this case, the span of time between the publication of the originals and their respective Spanish translations was very short, whereas the time lag concerning the translation of other canonical works of Holocaust literature into Spanish has traditionally been fairly long. This paper seeks to demonstrate that the rates of translated texts on the Holocaust published in Spain and the degree of involvement in Holocaust commemoration are directly interrelated. The ultimate goal is to determine whether the transcultural negotiations surrounding Holocaust memory in Spain are a two-way or a one-way process., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Hydroxyapatite modified poly(acrylic acid)/polyethylene glycol sustainable drug delivery nanocomposite prepared via double emulsion with bitter almond oil

  • Aslani, Ali
  • Pourmadadi, Mehrab
  • Abdous, Majid
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
A sustainable hydrogel-based drug delivery system for pH -sensitive delivery of doxorubicin (DOX) as a model drug has been developed for the first time to address some complications of chemotherapy. The biobased nanocomposite comprising hydroxyapatite (HAP) nanoparticles loaded in a biodegradable poly(acrylic acid) (PAA)/polyethylene glycol (PEG) hydrogel network was prepared via double emulsion method using bitter almond oil and span 80 surfactant. Double emulsions can expand the release of drugs for a longer period as well as increase their bioavailability in tumor tissues. Multiple analyses were conducted to assess the structure of the developed nanocarriers and their therapeutic efficiency. XRD and FTIR corroborated the successful synthesis of the nanocarriers and gave insight into their crystalline nature and molecular interactions between the components. DLS revealed the monodispersity of the nanocarriers, with an average size of 418 nm. TEM and SEM showed their spherical and porous morphology and zeta potential measurements indicated an average surface charge of -34.5 mV, thus corroborating their excellent stability and suitability for long time storage. The drug loading and entrapment efficiencies (46% and 87.5%, respectively) were higher than those reported previously for similar nanocarriers. An effective and sustained drug release profile was observed at pH 5.4. MMT assay and flow cytometric analyses showed that the developed hydrogel nanocomposite has satisfactory cytotoxicity compared to free DOX., Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Tunable molecular weight poly(3-hydroxybutyrate) via aluminium catalysis: from plasticizers to ultra-flexible matrices

  • Mula Herrero, Esther
  • Sessini , Valentina|||0000-0003-1205-4586
  • Ishaq, Muhammad
  • Santoriello, Giuseppe
  • Falivene, Laura
  • Caporaso, Lucia
  • Paolucci, Marina
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
12 p., Ring-opening polymerization (ROP) of beta-butyrolactone (beta-BL) represents a promising route toward sustainable poly(3-hydroxybutyrate) (P3HB) materials with tunable properties. In this work, we report a detailed study of the beta-BL polymerization catalyzed by an aluminium complex [AlMeL2]. Our results demonstrate a precise control over molecular weight through modulation of the reaction conditions. High molecular weight (M-w > 50 kDa) and low molecular weight (M-w < 2 kDa) P3HB were selectively synthesized, enabling their use as polymer matrices and plasticizing agents, respectively. Density functional theory (DFT) calculations unveiled the polymerization mechanism. It reveals a ligand-assisted initiation pathway involving proton transfer to the imine functionality, followed by ring opening and formation of an active aluminium-alkoxide species. End-group analysis confirms the O-alkyl cleavage mechanism that leads to crotonate-terminated chains. Bulk polymerization under solvent-free conditions afforded high molecular weight, highly flexible polymers (M-w up to 200 kDa), highlighting a more sustainable synthetic approach. Thermal analysis shows that high molecular weight P3HB exhibits glass transition temperatures comparable to bacterial analogues, while remaining amorphous highly elastic and processable. Low molecular weight P3HB displays a significantly lower T-g (-28 degrees C), confirming its effectiveness as highly compatible plasticizer for bacterial P3HB. This dual-application strategy highlights the potential of the [AlMeL2] catalyst to produce tailored P3HB materials for diverse applications, ranging from flexible polymer matrices to plasticizers., Agencia Estatal de Investigación, Comunidad de Madrid, Universidad de Alcalá, Fondo Europeo de Desarrollo Regional, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Two-dimensional graphitic carbon nitride (g-C3N4) nanosheets and their derivatives for diagnosis and detection applications

  • Pourmadadi, Mehrab
  • Rajabzadeh-Khosroshahi, Maryam
  • Saeidi Tabar, Fatemeh
  • Samadia, Amirmasoud
  • Yazdian, Fatemeh
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
The early diagnosis of certain fatal diseases is vital for preventing severe consequences and contributes to a more effective treatment. Despite numerous conventional methods to realize this goal, employing nanobiosensors is a novel approach that provides a fast and precise detection. Recently, nanomaterials have been widely applied as biosensors with distinctive features. Graphite phase carbon nitride (g-C3N4) is a two-dimensional (2D) carbon-based nanostructure that has received attention in biosensing. Biocompatibility, biodegradability, semiconductivity, high photoluminescence yield, low-cost synthesis, easy production process, antimicrobial activity, and high stability are prominent properties that have rendered g-C3N4 a promising candidate to be used in electrochemical, optical, and other kinds of biosensors. This review presents the g-C3N4 unique features, synthesis methods, and g-C3N4-based nanomaterials. In addition, recent relevant studies on using g-C3N4 in biosensors in regard to improving treatment pathways are reviewed., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Application of Deep Learning to Identify Flutter Flight Testing Signals Parameters and Analysis of Real F-18 Flutter Flight Test Data

  • Abou Kebeh, Sami
  • Gil Pita, Roberto|||0000-0002-1790-3834
  • Rosa Zurera, Manuel|||0000-0002-3073-3278
Aircraft envelope expansion during the installation of new underwing stores presents significant challenges, particularly due to the aeroelastic flutter phenomenon. Accurate modeling of aeroelastic behavior often necessitates flight testing, which poses risks due to the potential catastrophic consequences of reaching the flutter point. Traditional methods, like frequency sweeps, are effective but require prolonged exposure to flutter conditions, making them less suitable for transonic flight validations. This paper introduces a robust deep learning approach to process sine dwell signals from aeroelastic flutter flight tests, characterized by short data lengths (less than 5 s) and low frequencies (less than 10 Hz). We explore the preliminary viability of different deep learning networks and compare their performances to existing methods such as the PRESTO algorithm and Laplace Wavelet Matching Pursuit estimation. Deep learning algorithms demonstrate substantial accuracy and robustness, providing reliable parameter identification for flutter analysis while significantly reducing the time spent near flutter conditions. Although the results with the networks trained show less accuracy than the PRESTO algorithm, they are more accurate than the LaplaceWavelet estimation, and the results are promising enough to justify extended investigation on this area. This approach is validated using both synthetic data and real F-18 flight test signals, which highlights its potential for real-time analysis and broader applicability in aeroelastic testing., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Detection of intra-beat waves on ambulatory ECG using manifolds: an explainable deep learning approach

  • Plaza Seco, Carmen|||0000-0002-4714-1789
  • Barner, Kenneth E.
  • Holgado Cuadrado, Roberto
  • Melgarejo Meseguer, Francisco Manuel
  • Rojo Álvarez, José Luis
  • Blanco Velasco, Manuel|||0000-0001-6593-1517
The development of wearable technologies for acquiring bioelectrical signals is expanding, increasing the demand for algorithms to analyze large clinical datasets. Accurate intra-beat waveform detection in ECG analysis is critical for assisting cardiologists in diagnosing cardiac diseases. We present a novel deep-learning detector capable of detecting specific intra-beat waves without the need for heartbeat identification, addressing a key limitation in current approaches. The model is trained to directly detect one of three key waveforms: P, QRS, or T. This approach is well-suited for applications such as identifying the T wave for repolarization alternans or ischemia. We employ a rigorous patient separation methodology and use a gold standard with expert manual labels from two public databases: QTDB and LUDB. The model utilizes a simple autoencoder (AE) architecture, offering interpretability insights by visualizing decision-making in a latent space. During the model design stage, the system achieves F1-scores of 0.93, 0.97, and 0.93 for P, QRS, and T wave identification. In real-world ambulatory environments, the in-line detector performs at 0.94, 0.98, and 0.96 for each wave. This work uses manifold learning for ECG intra-wave detection with simple, explainable models based on the applied machine learning principles. It outperforms state-of-the-art methods and provides valuable insights into the decision-making process, making it particularly well-suited for real-world applications, offering both accuracy and interpretability in ambulatory ECG analysis., Universidad de Alcalá, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Mid-latitude double H-spikes: their properties and signatures in different geomagnetic indices

  • Saiz Villanueva, María Elena|||0000-0001-7878-9476
  • Guerrero Ortega, Antonio|||0000-0002-7056-7753
  • Cid Tortuero, Consuelo|||0000-0002-2863-3745
Proper assessment of geomagnetic disturbances is a key aspect of space weather as technology is often impacted by space weather activity without previous warnings or proper forecasts. Double H-spikes are a form of longitudinal asymmetry observed at midlatitudes. They are geomagnetic disturbances occurring simultaneously on the dayside and nightside as a negative/positive H-spike, which go unnoticed through common geomagnetic indices. This work presents the results of a systematic search for double H-spikes occurred over a 23-year period and analyzes characteristics of the double H-spikes such as the occurrence dependence on the solar cycle, season, intensity and phase of the geomagnetic storm. Our outcomes indicate that double H-spikes are a global phenomenon closely related with the substorm phenomenon and the ground magnetic disturbances observed at mid-latitude are remote effects of field-aligned currents (FACs). FACs would be the part of the substorm current wedge developed from the expansion onset of intense substorms whose effects have wide longitudinal extend as they are observed on the dayside and the nightside. Also mid-latitude global SYM and ASY indices are affected by FACs during those periods. Time derivatives of the SuperMAG SMR12 and SMR00 sector indices allow us to conclude that double H-spikes, as short-time high-intensity magnetic disturbances, pose a potential risk to damage ground-technological systems at midlatitudes., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Machine learning for property prediction and optimization of polymeric nanocomposites: a state-of-the-art

  • Champa Bujaico, Elizabeth
  • García Díaz, María del Pilar|||0000-0002-5361-6947
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Recently, the field of polymer nanocomposites has been an area of high scientific and industrial attention due to noteworthy improvements attained in these materials, arising from the synergetic combination of properties of a polymeric matrix and an organic or inorganic nanomaterial. The enhanced performance of those materials typically involves superior mechanical strength, toughness and stiffness, electrical and thermal conductivity, better flame retardancy and a higher barrier to moisture and gases. Nanocomposites can also display unique design possibilities, which provide exceptional advantages in developing multifunctional materials with desired properties for specific applications. On the other hand, machine learning (ML) has been recognized as a powerful predictive tool for data-driven multi-physical modelling, leading to unprecedented insights and an exploration of the system's properties beyond the capability of traditional computational and experimental analyses. This article aims to provide a brief overview of the most important findings related to the application of ML for the rational design of polymeric nanocomposites. Prediction, optimization, feature identification and uncertainty quantification are presented along with different ML algorithms used in the field of polymeric nanocomposites for property prediction, and selected examples are discussed. Finally, conclusions and future perspectives are highlighted.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A Novel Generalized Beamforming Layer Set for Deep Learning Based Acoustic Cavitation Detection

  • Zhu Zhou, Fang Fang|||0000-0003-2797-6073
  • Tejera Berengue, Diana|||0000-0002-7724-2476
  • Corral García, Gonzalo
  • Gil Pita, Roberto|||0000-0002-1790-3834
  • Rosa Zurera, Manuel|||0000-0002-3073-3278
  • Utrilla Manso, Manuel|||0000-0003-2930-6049
Cavitation is a major issue in hydraulic machinery, causing mechanical damage, efficiency loss and potential system failure. Early detection of cavitation is crucial for predictive maintenance, yet conventional monitoring methods based on pressure and vibration sensors often lack real-time accuracy. In this study, we proposea deep learning-based approach for cavitation detection by integrating trainable beamforming techniques into a trimmed YAMNet architecture. Our method improves computational efficiency by reducing the depth of YAMNet while incorporating spatial filtering layers with learnable parameters. Specifically, we introduce the Standard Beamforming Layer Set, which embeds domain knowledge into the spatial filtering process to enhance the extraction of cavitation-related features. Additionally, we propose the Generalized Beamforming Layer Set, which extends conventional beamforming by incorporating multiple summation elements, increasing noise robustness and detection reliability in complex industrial environments. The system is trained and evaluated using a real-world cavitation noise database recorded in an operational hydraulic system. Experimental results show that a trimmed YAMNet model with beamforming integration significantly improves detection accuracy while reducing computational cost. The proposed Generalized Beamforming Layer Set approach outperforms traditional beamforming methods, achieving a relative improvement of 33.90% over the baseline single-microphone setup without beamforming. These results highlight the effectiveness of integrating adaptive beamforming with deep learning for real-time acoustic monitoring, opening the way for more efficient and robust cavitation detection systems in industrial environments., Spanish Ministry of Science and Innovation, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Building HKUST-1 metal organic frameworks on a board of Cu tubular micromotors with adaptive propulsive capabilities

  • Solano Rodríguez, Enrique
  • Jurado Sánchez, Beatriz|||0000-0002-6584-1949
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
9 p., Herein we present one step simplified synthesis of tubular Cu micromotors based on Hong Kong University of Science and Technology (HKUST-1) metal organic frameworks (MOFs). Tubular Cu/Pt, Cu/Ni and Cu/Ni/Pt micromotors prepared via template electrodeposition are smartly used as nucleation spots for the synthesis of HKUST-1 MOFs by incubating with the specific ligand, benzene-1,3,5-tricarboxylic acid, without any harsh conditions. The inner engines impart the micromotors with adaptive propulsion mechanisms for future applications: magnetic, catalytic, and hybrid magnetic and catalytic modes, reaching speeds of up to 275 mu m s-1. Furthermore, stability studies reveal a delayed degradation of the HKUST-1 MOFs in the micromotors as compared with the free MOFs. The synthesis rationale and delayed stability of the HKUST-1 MOFs in water has been exploited for compound encapsulation and controlled release, as illustrated using fluorescein as the model molecule. This approach has unlocked a new range of possibilities for future applications, offering a promising platform for the development of functional micromotors with improved capabilities., Ministerio de Ciencia, Innovación y Universidades, Fondos Europeos de Desarrollo Regional, Unión Europea, Comunidad de Madrid, Junta de Comunidades de Castilla-La Mancha, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Novel Carboxymethyl cellulose-based hydrogel with core-shell Fe3O4@SiO2 nanoparticles for quercetin delivery

  • Mahdi Eshaghi, Mohammad
  • Pourmadadi, Mehrab
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
A nanocomposite composed of carboxymethyl cellulose (CMC) and core&#8211;shell nanoparticles of Fe3O4@SiO2 was prepared as a pH-responsive nanocarrier for quercetin (QC) delivery. The nanoparticles were further entrapped in a water-in-oil-in-water emulsion system for a sustained release profile. The CMC/Fe3O4@SiO2/QC nanoparticles were characterized using dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), a field emission scanning electron microscope (FE-SEM), and a vibrating sample magnetometer (VSM) to obtain insights into their size, stability, functional groups/chemical bonds, crystalline structure, morphology, and magnetic properties, respectively. The entrapment and loading efficiency were slightly improved after the incorporation of Fe3O4@SiO2 NPs within the hydrogel network. The dialysis method was applied for drug release studies. It was found that the amount of QC released increased with the decrease in pH from 7.4 to 5.4, while the sustained-release pattern was preserved. The A549 cell line was chosen to assess the anticancer activity of the CMC/Fe3O4@SiO2/QC nanoemulsion and its components for lung cancer treatment via an MTT assay. The L929 cell line was used in the MTT assay to determine the possible side effects of the nanoemulsion. Moreover, a flow cytometry test was performed to measure the level of apoptosis and necrosis. Based on the obtained results, CMC/Fe3O4@SiO2 can be regarded as a novel promising system for cancer therapy
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Role of iron oxide (Fe2O3) nanocomposites in advanced biomedical applications: a state-of-the-art review

  • Rahmani, Erfan
  • Shamsabadipour, Amin
  • Ahmadi, Mohammadjavad
  • Radhar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Nanomaterials have demonstrated a wide range of applications and recently, novel biomedical studies are devoted to improving the functionality and effectivity of traditional and unmodified systems, either drug carriers and common scaffolds for tissue engineering or advanced hydrogels for wound healing purposes. In this regard, metal oxide nanoparticles show great potential as versatile tools in biomedical science. In particular, iron oxide nanoparticles with different shape and sizes hold outstanding physiochemical characteristics, such as high specific area and porous structure that make them idoneous nanomaterials to be used in diverse aspects of medicine and biological systems. Moreover, due to the high thermal stability and mechanical strength of Fe2O3, they have been combined with several polymers and employed for various nano-treatments for specific human diseases. This review is focused on summarizing the applications of Fe2O3-based nanocomposites in the biomedical field, including nanocarriers for drug delivery, tissue engineering, and wound healing. Additionally, their structure, magnetic properties, biocompatibility, and toxicity will be discussed.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Functional traits and propagule pressure explain changes in the distribution and demography of non-native trees in Spain

  • Lara Romero, Carlos
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
  • Castro Díez, María del Pilar|||0000-0002-4841-5198
Questions Non-native tree species (NNT) may bring about economic benefits, but also threats to ecosystems, mostly if they show expansive trends. Location A set of 12,000 permanent plots of the second (1986?1996), third (1997?2007) and fourth (2008?2017) Spanish Forest Inventory. Methods We quantified changes over time (1986?2017) of the NNT present in forests of peninsular Spain and we assessed how NNT?s traits, propagule pressure and human perception of NNT explain changes in distribution and demography of NNT. We quantified changes in four demographic parameters of every NNT: changes in the occupancy of species (number of plots where the species are present), annual changes in tree density and basal area, and tree growth. To explain the observed species trends, we selected functional traits related to the resource acquisition strategy, and key human drivers. Results Most of the NNT expanded their occupancy in the study area and increased their density, basal area, and tree growth through time. Increases in tree density and growth were greater in NNT with greater tolerance for low water potentials, with low specific leaf area, and with high propagule pressure. Increases in basal area were greater with high height of the NNT. Conclusions The overall increase in occupancy suggests that there is room for expansion of NNT in Spain. This knowledge will help to predict the dynamics of NNT already present in Spain and identify risks for forest biodiversity., Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Polyvinyl pyrrolidone/starch/hydroxyapatite nanocomposite: A promising approach for controlled release of doxorubicin in cancer therapy

  • Borji, Bahar Kazem
  • Pourmadadi, Mehrab
  • Tajiki, Alireza
  • Abdous, Majid
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Doxorubicin (DOX) is an effective and widely used cancer chemotherapy drug, though its use is extremely dangerous due to side effects such as cardiotoxicity resulting from high doses. Herein, a sustainable and biocompatible starch/polyvinyl pyrrolidone/hydroxyapatite nanocomposite was prepared and loaded with DOX by water-in-oil-in water (W/O/W) emulsification method. Fourier-transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) confirmed the successful synthesis of the nanocomposite and indicated strong interactions between its components. Scanning electron microscopy (SEM) images revealed the quasi-spherical shape of the nanocomposite and dynamic light scattering (DLS) showed an average particle size of 258 nm. The zeta potential at pH 5.4 was -37.28 mV, corroborating its colloidal stability. Doxorubicin release in the ex vivo environment was investigated at pH 5.4 and 7.4, mimicking tumour and physiological conditions, respectively, and the results showed no initial burst release and a faster release kinetics in the acidic environment owed to the repulsive forces among protonated oxygenated groups of the drug and the polymers. The W/O/W improved entrapment efficiency and enabled a gradual DOX release, thus increasing the drug stability. The cell biocompatibility and anticancer activity of the drug-loaded nanocomposite were proved by MTT analysis on breast cancer fibroblast cells (7-MCF). The synthesized nanocomposite shows great potential as an effective nanocarrier of anticancer drugs for controlled release in the acidic environment of the tumour., Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Application of graphene-related materials in organic solar cells

  • Velasco Davoise, Lara|||0000-0002-6608-5938
  • Díez Pascual, Ana María|||0000-0001-7405-2354
  • Peña Capilla, Rafael|||0000-0002-7554-2029
Graphene-related materials (GRMs) such as graphene quantum dots (GQDs), graphene oxide (GO), reduced graphene oxide (rGO), graphene nanoribbons (GNRs), and so forth have recently emerged as photovoltaic (PV) materials due to their nanodimensional structure and outstanding properties such as high electrical and thermal conductivity, large specific surface, and unique combination of mechanical strength and flexibility. They can be a crucial part of transparent electrodes, hole/electron transport materials, and active layers in organic solar cells (OSCs). Besides their role in charge extraction and transport, GRMs act as device protectors against environmental degradation through their compact bidimensional structure and offer good durability. This review briefly presents the synthesis methods of GRMs and describes the current progress in GRM-based OSCs. PV parameters (short circuit current, open circuit voltage, power conversion efficiency, and fill factor) are summarized and comparatively discussed for the different structures. The efficiency recently surpassed 15% for an OSC incorporating polymer-modified graphene as a transparent electrode. The long-term stability of OSCs incorporating GRMs is also discussed. Finally, conclusions and the outlook for future investigation into GRM-based devices for PVs are presented.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Combining a land parcel cellular automata (LP-CA) model with participatory approaches in the simulation of disruptive future scenarios of urban land use change

  • Molinero Parejo, Ramón|||0000-0001-7406-8604
  • Aguilera Benavente, Francisco Israel|||0000-0001-5710-2057
  • Gómez Delgado, Montserrat|||0000-0001-6021-4340
  • Shurupov, Nikolai|||0000-0001-8005-9763
Urban development is a process that becomes increasingly complex as the city evolves and in which unexpected events can happen which may alter the envisaged trend over time. To anticipate and examine the sudden emergence of processes that are difficult to predict over long-term future timelines, prospective methodologies are required to manage and implement disruptive narrative storylines in future scenario planning. In this research, a method that combines Land Parcel Cellular Automata (LP-CA) and participatory approaches was developed in order to generate land use trajectories that are spatially consistent with disruptive narrative storylines. The urban-industrial corridor of Henares (Spain), which has undergone important urban transformations in recent decades, was chosen as the study area to test the model. In a preliminary validation of the LP-CA model, a Figure of Merit (FOM) value of 0.2817 indicated satisfactory performance. The results demonstrated the usefulness of the participatory scenario-building and the workshop in supporting the configuration of the model parameters and the spatial representation of complex urban dynamics. In conclusion, this methodology can be used to generate simulations of urban land use change in disruptive future scenarios and to spatially observe the propagation of the uncertainty associated with future events across different urban land uses., This work was supported by the Spanish Ministry of Science, Innovation and Universities and the European Social Fund [grant number PRE2018–084663]; the Spanish Ministry of Economy and Competitiveness [TRANSURBAN Project CSO2017–86914-C2–1-P]; and the “Estímulo a la Excelencia para Profesores Universitarios Permanentes” research programme funded by the University of Alcal´a and the Regional Government of Madrid [grant number EPU-INV/2020/009].
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Oxidative stress score as an indicator of pathophysiological mechanisms underlying cardiovascular disease in kidney transplant recipients

  • Valera Arévalo, Gemma|||0000-0002-7912-1133
  • Jara Caro, Paula
  • Rodríguez San Pedro, María del Mar
  • Yuste, Claudia
  • Ortiz Díaz, María Gabriela
  • Alique Aguilar, Matilde|||0000-0002-7912-1133
  • Ramírez Carracedo, Rafael
  • Guerra-Pérez, Natalia
  • Carracedo Añón, Julia María
  • Morales, Enrique
17 p., Chronic kidney disease is closely associated with an increased risk of cardiovascular disease. Although kidney transplantation represents the treatment of choice for patients with end-stage chronic kidney disease, it is also linked to significant cardiovascular risk. This study aimed to evaluate the relationship between cardiovascular pathology and oxidative status in kidney transplant recipients, while also assessing the influence of disease etiology and humoral immune response on oxidative imbalance. A cross-sectional analysis was conducted in individuals with advanced chronic kidney disease (n = 36) and kidney transplant recipients (n = 40). A total of 18 healthy subjects were included. The enzymatic activities of xanthine oxidase, superoxide dismutase, and glutathione peroxidase, and levels of lipid peroxidation products, oxidized glutathione, and reduced glutathione were measured using spectrophotometry in plasma and mononuclear and polymorphonuclear leukocytes isolated using Ficoll density gradients. Individual oxidative status was evaluated using OXYSCORE. Kidney transplantation was associated with a higher incidence of cardiovascular disease (p < 0.01) and increased levels of both prooxidant (p < 0.01) and antioxidant parameters (p < 0.01). Elevated OXYSCORE values were observed particularly in patients with nephroangiosclerosis, diabetic kidney disease, polycystic kidney disease (p < 0.05), and cardiovascular comorbidities (p < 0.001). Additionally, the presence of anti-graft antibodies correlated with higher oxidative scores. These findings suggest that OXYSCORE may serve as a potential indicator of cardiovascular damage in kidney transplant recipients., Instituto de Salud Carlos III, Fondos Europeos de Desarrollo Regional, Unión Europea, Universidad de Alcalá, Ministerio de Universidades
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

PMMA-based nanocomposites for odontology applications: a state-of-the-art

  • Díez Pascual, Ana María|||0000-0001-7405-2354
Polymethyl methacrylate (PMMA), a well-known polymer of the methacrylate family, is extensively used in biomedicine, particularly in odontological applications including artificial teeth, dentures and denture bases, obturators, provisional or permanent crowns, and so forth. The exceptional PMMA properties, including aesthetics, inexpensiveness, simple manipulation, low density, and adjustable mechanical properties, make it a perfect candidate in the field of dentistry. However, it presents some deficiencies, including weakness regarding hydrolytic degradation, poor fracture toughness, and a lack of antibacterial activity. To further enhance its properties and solve these drawbacks, different approaches can be performed, including the incorporation of nanofillers. In this regard, different types of metallic nanoparticles, metal oxide nanofillers, and carbon-based nanomaterials have been recently integrated into PMMA matrices with the aim to reduce water absorption and improve their performance, namely their thermal and flexural properties. In this review, recent studies regarding the development of PMMA-based nanocomposites for odontology applications are summarized and future perspectives are highlighted.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Immobilization of Alcalase on Silica Supports Modified with Carbosilane and PAMAM Dendrimers

  • Sánchez Milla, María
  • Hernández Corroto, Ester|||0000-0002-6001-3634
  • Sánchez-Nieves Fernández, Javier|||0000-0003-0410-2285
  • Gómez Ramírez, Rafael|||0000-0001-6448-2414
  • Marina Alegre, María Luisa|||0000-0002-5583-1624
  • García López, María Concepción|||0000-0002-3383-6176
  • Mata de la Mata, Francisco Javier de la|||0000-0003-0418-3935
Enzyme immobilization is a powerful strategy for enzyme stabilization and recyclability. Materials covered with multipoint molecules are very attractive for this goal, since the number of active moieties to attach the enzyme increases with respect to monofunctional linkers. This work evaluates different dendrimers supported on silica to immobilize a protease enzyme, Alcalase. Five different dendrimers were employed: two carbosilane (CBS) dendrimers of different generations (SiO2-G(0)Si-NH2 and SiO2-G(1)Si-NH2), a CBS dendrimer with a polyphenoxo core (SiO2-G(1)O(3)-NH2), and two commercial polyamidoamine (PAMAM) dendrimers of different generations (SiO2-G(0)PAMAM-NH2 and SiO2-G(1)PAMAM-NH2). The results were compared with a silica support modified with a monofunctional molecule (2-aminoethanethiol). The effect of the dendrimer generation, the immobilization conditions (immobilization time, Alcalase/SiO2 ratio, and presence of Ca2+ ions), and the digestion conditions (temperature, time, amount of support, and stirring speed) on Alcalase activity has been evaluated. Enzyme immobilization and its activity were highly affected by the kind of dendrimer and its generation, observing the most favorable behavior with SiO2-G(0)PAMAM-NH2. The enzyme immobilized on this support was used in two consecutive digestions and, unlike CBS supports, it did not retain peptides released in the digestion., Networking Research Center on Bioengineering, Biomaterials and Nanomedicine, Ministerio de Economía y Competitividad, Comunidad de Madrid, Instituto Ramón y Cajal de Investigación Sanitaria
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Amorín, Harvey
  • Jiménez, Ricardo
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
10 p., Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower Disomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 ?C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea, Fondo Europeo de Desarrollo Regional
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Visible-light mediated functionalization in Phe-containing peptides upon a debenzylative amination process

  • Morales Ortega, Guillermo|||0009-0008-7786-2801
  • Pérez Cubero, Iván
  • Gómez-Bengoa, Enrique
  • Correa, Arkaitz
  • Carreras Pérez Aradros, Javier|||0000-0002-1521-6758
7 p., An efficient protocol for the modification of phenylalanine-containing peptides is developed. The tandem debenzylation- amination process in N-terminal phenylalanine short peptides with N-iodoimides proceeds under visible-light irradiation and metal-free conditions. This method broadens the available chemical toolbox for the modification of Phe and allows the incorporation of N-containing heterocycles into peptide settings., Ministerio de Ciencia, Innovación y Universidades, Instituto de Salud Carlos III, Unión Europea, Gobierno Vasco, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Evaluation and Optimization of Prolonged Release Mucoadhesive Tablets of Dexamethasone for Wound Healing: In Vitro-In Vivo Profiling in Healthy Volunteers

  • Ul Ain Javed, Qurrat
  • Ali Syed, Muhammad
  • Arshad, Rabia
  • Rahdar, Abbas
  • Irfan, Muhammad
  • Atif Raza, Syed
  • Shahnaz, Gul
  • Hanif, Sana
  • Díez Pascual, Ana María|||0000-0001-7405-2354
The aim of the projected study was to design and develop a novel strategy for evaluating the mucoadhesive potential of polymeric tablets of dexamethasone (DXM) for local delivery against wounds. Therefore, formulations (Q1-Q7) were synthesized via direct compression method by varying the concentrations of polymers, i.e., ethyl cellulose (EC) and agar extract (AG). Moreover, the mucoadhesive polymeric tablets were characterized via physicochemical, in vitro, ex vivo and in vivo experiments. However, physicochemical characteristics such as FTIR showed no interaction with different polymeric combination. Surface pH of all formulations was normal to slightly alkaline. Highest hydration of up to 6.22% and swelling index was comprehended with maximum concentration of AG (50% of total tablet weight). Whereas, ex vivo and in vivo residence time and mucoadhesion were attributed to the increased concentrations of polymers. Moreover, Q7, (optimized formulation), containing 10% of EC and 40% of AG, exhibited maximum release of DXM (100%) over 8 h, along with sufficient mucoadhesive strength up to 11.73 g, following first-order kinetics having r(2) value of 0.9778. Hemostatic effects and epithelialization for triggering and promoting wound healing were highly pronounced in cases of Q7. Furthermore, in vivo residence time was 7.84 h followed by salivary drug concentration (4.2 mu g/mL). However, mucoadhesive buccal tablets showed stability for 6 months, thus following the standardization (ICH-Iva) stability zone. In summary, DXM mucoadhesive tablets seem to be an ideal candidate for eradication of wound infections via local targeted delivery., A
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Biopolymer Composites: Synthesis, properties and Applications

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Machine Learning approach for TWA detection relying on ensemble data design

  • Gutiérrez Fernández - Calvillo, Miriam
  • Goya Esteban, Rebeca
  • Cruz Roldán, Fernando|||0000-0001-6843-5199
  • Hernández Madrid, Antonio
  • Blanco Velasco, Manuel|||0000-0001-6593-1517
Background and objective: T-wave alternans (TWA) is a fluctuation of the ST–T complex of the surface electrocardiogram (ECG) on an every–other–beat basis. It has been shown to be clinically helpful for sudden cardiac death stratification, though the lack of a gold standard to benchmark detection methods limits its application and impairs the development of alternative techniques. In this work, a novel approach based on machine learning for TWA detection is proposed. Additionally, a complete experimental setup is presented for TWA detection methods benchmarking. Methods: The proposed experimental setup is based on the use of open-source databases to enable experiment replication and the use of real ECG signals with added TWA episodes. Also, intra-patient overfitting and class imbalance have been carefully avoided. The Spectral Method (SM), the Modified Moving Average Method (MMA), and the Time Domain Method (TM) are used to obtain input features to the Machine Learning (ML) algorithms, namely, K Nearest Neighbor, Decision Trees, Random Forest, Support Vector Machine and Multi-Layer Perceptron. Results: There were not found large differences in the performance of the different ML algorithms. Decision Trees showed the best overall performance (accuracy 0.88 ± 0.04, precision 0.89 ± 0.05, Recall 0.90± 0.05, F1 score 0.89± 0.03). Compared to the SM (accuracy 0.79, precision 0.93, Recall 0.64, F1 score 0.76) there was an improvement in every metric except for the precision. Conclusions: In this work, a realistic database to test the presence of TWA using ML algorithms was assembled. The ML algorithms overall outperformed the SM used as a gold standard. Learning from data to identify alternans elicits a substantial detection growth at the expense of a small increment of the false alarm., Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Aging discrimination of multispecies bloodstains on realistic forensic substrates using vibrational spectroscopy and chemometric models

  • Cano Trujillo, Cristina Pilar|||0000-0002-9587-4514
  • Toledo González, Victor Antonio|||0000-0001-9446-5543
  • Ortega Ojeda, Fernando Ernesto
  • Montalvo García, Gemma|||0000-0002-5640-8908
  • García Ruiz, Carmen|||0000-0001-5925-3449
10 p., Bloodstains found at crime scenes, mainly in violent cases, can have various origins. Human bloodstains are usually the most relevant; however, the large number of domestic animals currently living in homes can also lead to the presence of animal bloodstains at crime scenes, especially when the committed crime has involved an animal. Determining when the bloodstain was deposited, whether human or animal, is essential for reconstructing the events. The use of non-destructive analysis techniques that allow the integrity of the evidence to be maintained for subsequent analyses is becoming increasingly important. Thus, this study seeks to examine and compare the use of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and Raman spectroscopy, together with chemometrics, for the estimation of the age of human, dog, and cat bloodstains when they are found deposited on complex substrates such as sand and soil. No visual changes were observed in the bloodstain spectral bands over time, especially when deposited on the complex substrates. Thus, orthogonal partial least squares-discriminant analysis (OPLS-DA) models were created to classify bloodstains according to their time since deposition (age). It was possible to distinguish the bloodstains according to their different age, regardless of the donor?s species and on the complex substrates considered in this study, both with ATR-FTIR and Raman. These are promising results for investigating real forensic situations, such as bloodstains found in burials., University Institute of Research in Police Sciences, European Commission, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Construction of Aptamer-Based Nanobiosensor for Breast Cancer Biomarkers Detection Utilizing g-C3N4/Magnetic Nano-Structure

  • Pourmadadi, Mehrab
  • Yazdian, Fatemeh
  • Ghorbanian, Sohrabali
  • Khandel, Elham
  • Rashedi, Hamid
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
An electrochemical aptasensor has been developed to determine breast cancer biomarkers (CA 15-3). Aptamer chains were immobilized on the surface of the electrode by g-C3N4/Fe3O4 nanoparticles, which increased the conductivity and active surface area of the electrode. X-ray diffraction analysis (XRD), Fourier-transformed infrared spectroscopy (FTIR), and transmission electron microscopy (TEM) measurements have been carried out to characterize the nanomaterials. Cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy have been used to characterize the developed electrode. The results demonstrate that the modified electrode has better selectivity for CA 15-3 compared to other biological molecules. It has a good electrochemical response to CA 15-3 with a detection limit of 0.2 UmL(-1) and a linear response between 1 and 9 UmL(-1). It has been used as a label-free sensor in potassium ferrocyanide medium and as methylene blue-labeled in phosphate buffer medium. This electrode was successfully applied to analyze the serum of diseased and healthy individuals, which corroborates its high potential for biosensing applications, especially for the diagnosis of breast cancer.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Mannosylated preactivated hyaluronic acid-based nanostructures for bacterial infection treatment

  • Arshad, Rabia
  • Salman, Muhammad
  • Malik, Abdul
  • Alkholief, Musaed
  • Tabish, Tanveer A.
  • Moghadam, Ali Abbasi
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Salmonella Typhi is an intracellular bacterium causing a variety of enteric diseases, being typhoid fever the most common. Current modalities for treating S. typhi infection are subjected to multi-drug resistance. Herein, a novel macrophage targeting approach was developed via coating bioinspired mannosylated preactivated hyaluronic acid (Man-PTHA) ligands on a self-nanoemulsifying drug delivery system (SNEDDS) loaded with the anti-bacterial drug ciprofloxacin (CIP). The shake flask method was used to determine the drug solubility in the different excipients (oil, surfactants and co-surfactants). Man-PTHA were characterized by physicochemical, in vitro, and in vivo parameters. The mean droplet size was 257 nm, with a PDI of 0.37 and zeta potential of ?15 mV. In 72 h, 85 % of the drug was released in a sustained manner, and the entrapment efficiency was 95 %. Outstanding biocompatibility, mucoadhesion, muco-penetration, anti-bacterial action and hemocompatibility were observed. Intra-macrophage survival of S. typhi was minimal (1 %) with maximum nanoparticle uptake, as shown by their higher fluorescence intensity. Serum biochemistry evaluation showed no significant changes or toxicity, and histopathological evaluation confirmed the entero-protective nature of the bioinspired polymers. Overall, results confirm that Man-PTHA SNEDDS can be employed as novel and effective delivery systems for the therapeutic management of S. typhi infection., Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Formulation of double nanoemulsions based on pH-sensitive poly acrylic acid/agarose/ZnO for quercetin controlled release

  • Ahmadi, Hamed
  • Pourmadadi, Mehrab
  • Abdous, Majid
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Quercetin (QC) is a promising cancer drug, though its poor solubility and quick release reduce its bioavailability, thus limiting its current applications. In this research, a new hydrogel nanocomposite comprising zinc oxide nanoparticles (ZnONPs), agarose, and polyacrylic acid (PAA), was designed to load QC. Spherical nanocarriers were prepared via environmentally friendly and simple double emulsion approach by injecting PAA/Aga/ZnONPs coated by SPAN 80 surfactant to a hydrophobic olive oil phase. The nanoemulsions were characterized by different techniques to assess the impact of ZnONPs on PAA/Aga pH-sensitive hydrogel as a novel platform for direct administration of QC. FTIR and XRD analysis confirmed the presence of all the nanocomposite components in the final formulation. FE-SEM images revealed the spherical shape and surface homogeneity of the nanocarriers, and zeta potential measurements corroborated their colloidal stability. The addition of ZnONPS increased the drug loading from 41.25% to 47.50% and the encapsulation efficiency from 83.0% to 87.25%. A slower drug release was observed at pH 7.4 for periods of time shorter than 96 h, corroborating the pH-sensitivity of the nanoemulsions. Drug release data at pH 5.4 fitted well to the First-order equation, while at pH 7.4 were better described by the Korsmeyer Peppas model. The reduction in MCF7 living cells in the presence of PAA/Aga/ZnONPs compared to PAA/Aga and the control sample indicates the in vitro cytotoxicity of ZnONPs. The number of late apoptotic cells in PAA/Aga/ZnONPs/QC (37.55%) was higher than that of the other formulations (ZnONPs, PAA/Aga and PAA/Aga/ZnONPs), which may be due to the controlled and slow release of QC from PAA/Aga/ZnONPs/QC. Therefore, these green, biocompatible and biodegradable nanoemulsions show great potential as nanocarriers for QC loading and sustained release against breast cancer., Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Isotropic and Anisotropic Complex Refractive Index of PEDOT:PSS

  • Velasco Davoise, Lara|||0000-0002-6608-5938
  • Peña Capilla, Rafael|||0000-0002-7554-2029
  • Díez Pascual, Ana María|||0000-0001-7405-2354
In this work, the complex refractive indexes of seven PEDOT:PSS samples, three with isotropic behavior and four with optical anisotropy, were determined. For the anisotropic samples, the ordinary and extraordinary components of the refractive index were described. The effect of the film thickness, measurement technique and preparation method on the extinction coefficient (k) and refractive index (n) of each sample was also discussed. Important differences (up to 20% in the average n) were found among the samples investigated. In most anisotropic films, the mean value of the extraordinary component was between 7 and 10% higher than that of the ordinary. In the three isotropic films, the average k rose when the film thickness increased. Moreover, the different sets of refractive index data were fitted to three different models: the original Forouhi?Bloomer model, the Liu (2007) model and the revised version of the Forouhi?Bloomer model (2019). In general, Liu?s model gave better results, with small errors in n and k (<7.81 and 4.68%, respectively, in all the cases). However, this model had seven fitting parameters, which led to significantly longer computation time than the other two models. The influence of the differences in the measurement of the complex refractive index on the simulation of the optical properties of PEDOT:PSS multilayers was discussed. The results showed that n must be known precisely to accurately calculate the light absorption in a multilayer, without ignoring the isotropic or anisotropic behavior of the material or the influence of the layer thickness on its optical properties. This study aids in the development of simulation and optimization tools that allow understanding the optical properties of PEDOT:PSS films for their potential applications in organic optoelectronic devices, such as organic solar cells., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Characterization of noise in long-term ECG monitoring with machine learning based on clinical criteria

  • Holgado Cuadrado, Roberto
  • Plaza Seco, Carmen|||0000-0002-4714-1789
  • Lovisolo, Lisandro
  • Blanco Velasco, Manuel|||0000-0001-6593-1517
Noise and artifacts affect strongly the quality of the electrocardiogram (ECG) in long-term ECG monitoring (LTM), making some of its parts impractical for diagnosis. The clinical severity of noise defines a qualitative quality score according to the manner clinicians make the interpretation of the ECG, in contrast to assess noise from a quantitative standpoint. So clinical noise refers to a scale of different levels of qualitative severity of noise which aims at elucidating which ECG fragments are valid to achieve diagnosis from a clinical point of view, unlike the traditional approach, which assesses noise in terms of quantitative severity. This work proposes the use of machine learning (ML) techniques to categorize different qualitative noise severity using a database annotated according to a clinical noise taxonomy as gold standard. A comparative study is carried out using five representative ML methods, namely, K neareast neighbors, decision trees, support vector machine, single-layer perceptron, and random forest. The models are fed by signal quality indexes characterizing the waveform in time and frequency domains, as well as from a statistical viewpoint, to distinguish between clinically valid ECG segments from invalid ones. A solid methodology to prevent overfitting to both the dataset and the patient is developed, taking into account balance of classes, patient separation, and patient rotation in the test set. All the proposed learning systems have demonstrated good classification performance, attaining a recall, precision, and F1 score up to 0.78, 0.80, and 0.77, respectively, in the test set by a single-layer perceptron approach. These systems provide a classification solution for assessing the clinical quality of the ECG taken from LTM recordings., Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Novel chitosan/γ-alumina/carbon quantum dot hydrogel nanocarrier for targeted drug delivery

  • Hossein Karami, Mohammad
  • Pourmadadi, Mehrab
  • Abdous, Majid
  • Reza Kalaee, Mohammad
  • Moradi, Omid
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Curcumin (CUR) is among the most natural and effective antitumor drugs for cancer treatment. These drugs have low solubility and short half-lives that reduce their effectiveness in drug release systems. Herein, a hydrogel nanocarrier containing chitosan (CS), alumina (gamma-Al2O3), and carbon quantum dots (CQDs) was prepared by the water-in-oil-in-water (W/O/W) double nanoemulsion method. DLS revealed a nanocarrier size of 227 nm, with a zeta potential of &#8722;37.8 mV, which corroborates its stability. FE-SEM showed its quasi-spherical shape, FT-IR and XRD confirmed the presence of all the components in the nanocomposite and gave information about the intermolecular interactions between them and the crystalline nature of the nanocarrier, respectively. The drug loading (48 %) and entrapment efficiency (86 %) were higher than those reported previously for other CUR nanocarriers. The drug release profile revealed a controlled and stable release, and a pH-sensitive behavior, with faster CUR release in an acid environment. The breast cancer cell line was examined by cytotoxicity and cell apoptosis analyses. The results showed that the slow release over time and the programmed cell death were due to interactions between CUR and the nanocarrier. Considering the results obtained herein, CS/gammaAl2O3/CQDs/CUR can be considered as a promising new nanosystem for tumor treatment., Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Biotemplated Photocatalytic Micromotors for Effective Inhibition of Bacterial Growth

  • Cuntín Abal, Carmen|||0000-0001-5713-0971
  • Chávez Peraza, Miriam|||0000-0002-5512-7485
  • Jurado Sánchez, Beatriz|||0000-0002-6584-1949
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
Bacterial infections represent a major threat that can cause millions of deaths worldwide, where bacterial species can colonize and grow into highly resistant biofilms. Autonomous micromotor propulsion can improve the overall efficiency of bacterial growth inhibition versus other static processes, leading to novel methods for bacterial treatment. Here, biotemplated magnetic and photocatalytic micromotors are synthesized using E. coli and S. aureus as bacterial templates with different morphological features, such as shape and size, to obtain reproducible micromotors, followed by decoration with Fe3O4 nanoparticles for magnetic guidance into biofilms. Then, photoactive BiOCl crystals are grown on the micromotor surface for in situ photocatalytic generation of reactive oxygen species (ROS) for efficient bacterial growth inhibition. Thanks to their high photostability, E. coli@Fe3O4@BiOCl micromotors enabled controlled and efficient ROS production under sterilization conditions by using 375 nm light to trigger an oxygen vacancy generation mechanism within a biocompatible, tailored 3D-printed electrochemical cell. The (photo)electrochemical ROS generation correlated well with highly efficient bacterial growth inhibition, demonstrating the potential application of the collective dynamics of these multifunctional biotemplate-based micromotors. The concepts described here are promising for the development of future strategies against resistant bacteria by understanding the underlying processes behind them., Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid, Junta de Comunidades de Castilla la Mancha, Universidad de Alcalá, European Union
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Tokenized carbon credits in voluntary carbon markets: the case of KlimaDAO

  • Ballesteros Rodríguez, Alberto|||0000-0001-6357-8916
  • Lucio Fernández, Juan José de|||0000-0002-9335-6000
  • Sicilia Urbán, Miguel Ángel|||0000-0003-3067-4180
The voluntary carbon market offers a flexible and cost-effective way to reduce greenhouse gas emissions, which has led to increased interest in these markets. Within the decentralized finance ecosystem, Decentralized Autonomous Organizations leverage the tokenization of carbon credits to enhance efficiency and transparency. KlimaDAO, established in August 2021, aims to accelerate the adoption of carbon markets by integrating blockchain technology to facilitate transparent, secure, and accessible carbon trading. This study analyzes the evolution of KlimaDAO by evaluating its market capitalization, token prices, staking participation, carbon credit retirements, market participation, and concentration. The analysis reveals that while KlimaDAO initially achieved significant engagement and activity, it now faces challenges associated with market maturity and participant retention. Finally, the study highlights the importance of standardization and regulatory frameworks to enhance interoperability, transparency, and legitimacy within the tokenized carbon market., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Mapping disruptive long-term scenarios using a participatory approach

  • Molinero Parejo, Ramón|||0000-0001-7406-8604
  • Aguilera Benavente, Francisco Israel|||0000-0001-5710-2057
  • Gómez Delgado, Montserrat|||0000-0001-6021-4340
  • Soria Lara, Julio Alberto
Although mapping long-term scenarios can be considered crucial in decision-making, its inclusion in planning processes remains a challenge. This paper aims to gain insights into this by showing a participatory mapping method that creates a dialogue and interaction space between stakeholders and experts. The research was based on three 2050 visions, taking as a case study the eastern sector of the metropolitan area of Madrid, Spain. The method consisted of conducting a participatory mapping workshop involving urban planners, transport engineers, environmental consultants, and property developers. Those experts mapped transformations in urban land use for each 2050 scenario. The results evidenced differences between the three 2050 scenarios, highlighting the usefulness of the participatory mapping workshop to represent the amount and nature of growth in urban land use and organisation of the transport network., This work was supported by the Spanish Ministry of Science, Innovation and Universities and European Social Found, under grant State Programme for the Promotion of Talent and its Employability in R&D (PRE2018-084663). The work was also supported by Spanish Ministry of Economy and Competitiveness under grant TRANSURBAN project (CSO2017-86914-C2-1-P) and the research program ‘Estímulo a la Excelencia para Profesores Universitarios Permanentes’ funded by University of Alcalá and the Community of Madrid (EPU-INV/2020/009).
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Curcumin Sustained Release with a Hybrid Chitosan-Silk Fibroin Nanofiber Containing Silver Nanoparticles as a Novel Highly Efficient Antibacterial Wound Dressing

  • Heydari Foroushani, Parisa
  • Rahmani, Erfan
  • Vossoughi, Manouchehr
  • Pourmadadi, Mehrab
  • Radhar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Drug loading in electrospun nanofibers has gained a lot of attention as a novel method for direct drug release in an injury site to accelerate wound healing. The present study deals with the fabrication of silk fibroin (SF)-chitosan (CS)-silver (Ag)-curcumin (CUR) nanofibers using the electrospinning method, which facilitates the pH-responsive release of CUR, accelerates wound healing, and improves mechanical properties. Response surface methodology (RSM) was used to investigate the effect of the solution parameters on the nanofiber diameter and morphology. The nanofibers were characterized via Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential, and Dynamic Light Scattering (DLS). CS concentration plays a crucial role in the physical and mechanical properties of the nanofibers. Drug loading and entrapment efficiencies improved from 13 to 44% and 43 to 82%, respectively, after the incorporation of Ag nanoparticles. The application of CS hydrogel enabled a pH-responsive release of CUR under acid conditions. The Minimum Inhibitory Concentration (MIC) assay on E. coli and S. aureus bacteria showed that nanofibers with lower CS concentration cause stronger inhibitory effects on bacterial growth. The nanofibers do not have any toxic effect on cell culture, as revealed by in vitro wound healing test on NIH 3T3 fibroblasts.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Development of chitosan based β-carotene mucoadhesive formulation for skin cancer treatment

  • Azhar, Farah
  • Naureen, Humaira
  • Shahnaz, Gul
  • Hassan Kiani, Maria
  • Kumar Manna, Manoj
  • Mujtaba Babar, Mustafeez
  • Rajadas, Jayakumar
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Mucopermeating nanoformulations can enhance mucosal penetration of poorly soluble drugs at their target site. In this work, thiolated chitosan (TCS)-lithocholic acid (LA) nanomicelles loaded with beta-carotene, a safe phytochemical with anticancer properties, were designed to improve the pharmaceutical and pharmacological drug profile. The TCS-LA nanomicelles were characterized by FTIR to confirm the presence of the thiol group that favors skin adhesion, and to corroborate the conjugation of hydrophobic LA with hydrophilic CS to form an amphiphilic polymer derivative. Their crystalline nature and thermal behavior were investigated by XRD and DSC analyses, respectively. According to DLS and TEM, their average size was <300 nm, and their surface charge was +27.0 mV. beta-carotene entrapment and loading efficiencies were 64 % and 58 %, respectively. In vitro mucoadhesion and ex vivo mucopenetration analyses further corroborated the potential of the nanoformulation to deliver the drug in a sustained manner under conditions mimicking cancer micro-environment. Anticancer studies in mice demonstrated that the loaded nanomicelles delayed skin cancer growth, as revealed by both morphological and biochemical parameters. Based on the results obtained herein, it can be concluded that drug-loaded TCS-LA is a novel, stable, effective and safe mucoadhesive formulation of beta-carotene for the potential treatment of skin cancer., Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

pH-responsive polyacrylic acid (PAA)-carboxymethyl cellulose (CMC) hydrogel incorporating halloysite nanotubes (HNT) for controlled curcumin delivery

  • Pourmadadi, Mehrab
  • Darvishan, Sepehr
  • Yazdian, Fatemeh
  • Abdous, Majid
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
A pH-sensitive nanocomposite based on halloysite nanotubes (HNT) coated with polyacrylic acid (PAA)/carboxymethyl cellulose (CMC) hydrogel was synthesized for controlled delivery of curcumin (CUR) to MCF-7 cancer cells. Hazelnut oil was added to minimize the nanocomposite size and increase its uniformity via water/oil/water (W/O/W) double emulsion method. Likewise, Span 80 surfactant was incorporated to produce a nanoniosomal emulsion that increased the stability and retention of CUR as an anticancer drug. The molecular interactions between the nanocomposite components, its crystalline structure, surface morphology, size distribution and surface charge were analyzed through Fourier transformed infrared (FT-IR) spectroscopy, field emission-scanning electron microscope (FE-SEM), X-ray diffraction (XRD), dynamic light scattering (DLS) and zeta potential measurements, respectively. The resulting drug delivery system showed a 45% drug loading and an 87% encapsulation efficiency, which are amongst the highest values reported up to date for CUR nanocarriers. The zeta potential of the nanocomposite was about 36 mV, indicating good stability. A sustained drug release was observed, with 61% and 96% CUR released at pH 7.4 and 5.4 after 96 h, respectively, which confirms the pH-sensitivity of the developed nanocarrier. MTT assay demonstrated the strong toxicity of the nanocomposites against MCF-7 cancer cells. Also, 46% of cell death rate in the apoptotic phase was observed by flow cytometry. The results obtained herein support the great potential of PAA/CMC/HNT/CUR hydrogel nanocomposites as smart drug delivery vehicles for breast cancer treatment., Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Classifying and bounding geomagnetic storms based on the SYM-H and ASY-H indices

  • Collado Villaverde, Armando
  • Muñoz Martínez, Pablo|||0000-0003-0581-5383
  • Cid Tortuero, Consuelo|||0000-0002-2863-3745
Geomagnetic storms, which are significant disturbances in Earth’s magnetic field, pose a natural hazard with potentially harmful effects on technological and electrical systems. Various indices such as Kp, Dst, and the newer SYM-H and ASY-H are used to measure storm intensity. However, there is no consensus among researchers regarding storm classification based on intensity and asymmetry for the SYM-H and ASY-H indices, as existing classifications mainly rely on the Dst and Kp indices. This study proposes a classification method based on the cumulative distribution function of the SYM-H and ASY-H indices, applying industry-wide percentiles to determine storm classes. Using percentiles and a superposed epoch analysis, storms are objectively classified based on intensity and occurrence probability. This classification approach has applications in storm forecasting and risk assessment., European Space Agency, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

QbD-based fabrication of biomimetic hydroxyapatite embedded gelatin nanoparticles for localized drug delivery against deteriorated arthritic joint architecture

  • Qurat Ul Ain, Bukhari
  • Zeeshan, Mahira
  • Mazhar, Danish
  • Afzal, Iqra
  • Ullah, Hameed
  • Ali, Hussain
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Biomaterials such as nanohydroxyapatite and gelatin are widely explored to improve damaged joint architecture associated with rheumatoid arthritis (RA). Besides joint damage, RA is associated with inflammation of joints and cartilage, which potentiates the need for both bone nucleation and therapeutic intervention. For such purpose, a modified nanoprecipitation method is used herein to fabricate tofacitinib (Tofa)-loaded nanohydroxyapatite (nHA) embedded gelatin (GLT) nanoparticles (NPs) (Tofa-nHA-GLT NPs). The quality by design (QbD) approach is chosen to assess the key parameters that determine the efficiency of the NPs, and are further optimized via Box-Behnken design of experiment. The particle size, polydispersity, zeta potential, and encapsulation efficiency (EE) of the prepared NPs are found to be 269 nm, 0.18, -20.5 mV, and 90.7%, respectively. Furthermore, the NPs have improved stability, skin permeability, and a sustained drug release pattern at pH 6.5 (arthritic joint pH). Moreover, rhodamine-B loaded nHA-GLT NPs demonstrates considerably higher cellular uptake by the murine-derived macrophages than free rhodamine-B solution. In vitro, cell-based experiments confirm the good cell biocompatibility with insignificant toxicity. Thus, QbD-based approach has successfully led to the development of Tofa-nHA-GLT NPs with the potential to target inflamed arthritic joint. A research study is designed to fabricate Tofacitinib loaded nanohydroxyapatite embedded gelatin nanoparticles (Tofa-nHA-GLT NPs) to target Rheumatoid Arthritis (RA) and its related bone deformities. The result outcomes show a successful development of desired NPs, with optimal size, morphology, significant cellular uptake and biocompatibility with potential to treat RA and related bone deformities.image, Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Check-all-that-apply and storyworld possible selves: what consumer research methods can do for the study of narrative engagement

  • Martínez Martínez, María Ángeles|||0000-0001-6473-1249
  • Orden Martín, David|||0000-0001-5403-8467
  • Fernández Fernández, Encarnación
The empirical study of literary experiences affords the opportunity to investigate the extent to which the interpretations of literary critics may coincide with the meaning construction operations of flesh-and-blood readers. The present study explores the analytical potential of a statistics-based Check-all-that-apply (CATA) methodology, traditionally used in consumer research, in the study of real reader response. To this purpose, an online questionnaire designed along CATA lines is used to investigate the emergence of storyworld possible selves during narrative interaction with the graphic short story "City" (Wasco, 2015). The findings are compared to those of two previous studies of this short story, one literary (Herman & Vervaeck, 2019) and the other empirical (Martínez & Herman, 2020), and suggest that a CATA methodology can enlighten aspects of readerly response not previously addressed, particularly regarding the idiosyncratic construction of the main character in ways relevant to individual readers" construction of themselves., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Bacteria capture with magnetic nanoparticles modified with cationic carbosilane dendritic systems

  • Quintana Sánchez, Sara|||0000-0003-3184-716X
  • Barrios Gumiel, Andrea
  • Sánchez-Nieves Fernández, Javier|||0000-0003-0410-2285
  • Copa Patiño, José Luis|||0000-0002-2162-3907
  • Mata de la Mata, Francisco Javier de la|||0000-0003-0418-3935
  • Gómez Ramírez, Rafael|||0000-0001-6448-2414
Bacteria elimination from water sources is key to obtain drinkable water. Hence, the design of systems with ability to interact with bacteria and remove them from water is an attractive proposal. A diversity of polycationic macromolecules has shown bactericide properties, due to interactions with bacteria membranes. In this work, we have grafted cationic carbosilane (CBS) dendrons and dendrimers on the surface of iron oxide magnetic nanoparticles (MNP), leading to NP (ca. 10 nm) that interact with bacteria by covering bacteria membrane. Application of an external magnetic field removes MNP from solution sweeping bacteria attached to them. The interaction of the MNP with Gram-positive S. aureus bacteria is more sensible to the size of dendritic system covering the MNP, whereas interaction with Gramnegative E. coli bacteria is more sensible to the density of cationic groups. Over 500 ppm of NPM, MNP covered with dendrons captured over 90% of both type of bacteria, whereas MNP covered with dendrimers were only able to capture S. aureus bacteria (over 90%) but not E. coli bacteria. Modified MNP were characterized by transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), Z potential and dynamic light scattering (DLS). Interaction with bacteria was analyzed by UV, TEM and scanning electron microscopy (SEM). Moreover, the possibility to recycle cationic dendronized MNP was explored., Ministerio de Economía, Industria y Competitividad, Comunidad de Madrid, Instituto Ramón y Cajal de Investigación Sanitaria
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Machine learning based detection of T-wave alternans in real ambulatory conditions

  • Pascual Sánchez, Lidia|||0000-0001-6042-6300
  • Goya Esteban, Rebeca
  • Cruz Roldán, Fernando|||0000-0001-6843-5199
  • Hernández Madrid, Antonio
  • Blanco Velasco, Manuel|||0000-0001-6593-1517
Background and objective T-wave alternans (TWA) is a fluctuation in the repolarization morphology of the ECG. It is associated with cardiac instability and sudden cardiac death risk. Diverse methods have been proposed for TWA analysis. However, TWA detection in ambulatory settings remains a challenge due to the absence of standardized evaluation metrics and detection thresholds. Methods In this work we use traditional TWA analysis signal processing-based methods for feature extraction, and two machine learning (ML) methods, namely, K–nearest–neighbor (KNN) and random forest (RF), for TWA detection, addressing hyper–parameter tuning and feature selection. The final goal is the detection in ambulatory recordings of short, non-sustained and sparse TWA events. Results We train ML methods to detect a wide variety of alternant voltage from 20 to 100 μV, i.e., ranging from non–visible micro–alternans to TWA of higher amplitudes, to recognize a wide range in concordance to risk stratification. In classification, RF outperforms significantly the recall in comparison with the signal processing methods, at the expense of a small lost in precision. Despite ambulatory detection stands for an imbalanced category context, the trained ML systems always outperform signal processing methods. Conclusions We propose a comprehensive integration of multiple variables inspired by TWA signal processing methods to fed learning-based methods. ML models consistently outperform the best signal processing methods, yielding superior recall scores., Universidad de Alcalá, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Forest structural diversity modulates tree growth synchrony in response to climate change

  • Astigarraga Urcelay, Julen|||0000-0001-9520-3713
  • Calatayud Ortega, Joaquín Manuel
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
  • Madrigal González, Jaime
  • Tijerín Triviño, Julián|||0000-0001-9576-4780
  • Zavala Gironés, Miguel Ángel de|||0000-0003-1456-0132
  • Andivia Muñoz, Enrique|||0000-0002-9096-3294
  • Herrero Méndez, Asier|||0000-0003-2932-5194
9 p., Following centuries of deforestation, many industrialized countries have experienced an increase in forest area and biomass due to changes in land- and forest-use since the mid-20th century. At the same time, the impacts of climate change on forests are aggravating, but the interplay between past land- and forest-use (i.e. land- and forest-use legacies) and climate change in tree growth remains elusive. Tree growth synchrony, defined as the coincident increase in annual tree growth between different tree individuals over time, represents a comprehensive ecological measure of the level of environmental stress faced by forests, and consequently, can assess forest vulnerability to global change. Here using network theory and generalized linear mixed models, we tested whether tree size heterogeneity, resulting from different land- and forest-use legacies (i.e. recently-established, long-established, recently-pruned pollards and old-pruned pollards), modulated tree growth synchrony in response to heatwaves frequency synchrony between 1970 and 2020. We analyzed tree growth data from European beech (Fagus sylvatica L.) stands with different histories of forest management at the species? low-latitude margin. We found increased tree growth synchrony under more frequent heatwaves and late spring frosts, and reduced precipitation. Interestingly, tree growth synchrony in response to heatwave frequency was modulated by tree size heterogeneity, with the highest synchrony observed in stands with low tree size heterogeneity, mainly found in recently-established forests. Conversely, stands with high tree size heterogeneity did not show important changes in synchrony with increasing heatwaves frequency. Our results highlight the importance of maintaining structurally diverse forests to mitigate the negative effects of climate change on forest productivity, and thereby, increase forest resilience to future forest climate risks., Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI), Gobierno Vasco, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of chiral bidentate bis(N-heterocyclic carbene)-carboxylate palladium and nickel complexes

  • Sanchez, Adrián
  • Sanz Garrido, Jorge|||0000-0002-1077-4056
  • Carrasco, Carlos J.
  • Montilla, Francisco
  • Álvarez, Eleuterio
  • González Arellano, María Del Camino|||0000-0003-3393-2130
  • Flores Serrano, Juan Carlos|||0000-0001-6356-555X
  • Galindo, Agustin
7 p., Complexes [Pd{(S)-NHCMes,R}(2)] (R = Me, 2a; Pr-i, 2b; Bu-i, 2c) and [Pd{(R)-NHCMes,Me}(2)] (2a') were prepared by reaction of the corresponding imidazolium precursor [Im(Mes,R)] (namely (S)-2-alkyl(3-mesityl-1H-imidazol-3-ium-1-yl)acetate, 1a-c, and (R)-2-methyl(3-mesityl-1H-imidazol-3-ium-1-yl)acetate, 1a'), with Ag2O and sub-sequent interaction with Pd(OAc)(2), under appropriate conditions. Alternatively, complexes 2 were also obtained by treating compounds [Im(Mes,R)], 1, with an in-situ prepared lithium diisopropylamide solution and then reaction with [Pd(OAc)(2)]. On the other hand, the nickel complex [Ni{(S)-NHCMes,iPr}(2)], 3b, was synthesized by the interaction of the complex [NiCp2] (Cp = eta(5)-C5H5) with [Im(Mes,iPr)], 1b, in THF. If this reaction was carried out in acetonitrile, a mixture of complex 3b and the cyclopentadienyl monocarbene complex [NiCp{(S)-NHCMes,iPr}], 4b, was obtained. Similarly to 2b, compound 3b was also prepared by the in-situ formation of the carbene [(S)- NHCMes,iPr](-) and then reaction with [NiBr2(dme)] (dme = 1,2-dimethoxyethane). Complexes 2, 3 and 4 were obtained with good yields and fully characterized by analytical (HR-ESI and microanalysis), spectroscopic (IR, H-1 and C-13 NMR and polarimetry) and X-ray methods (2c). In the solid state, 2c is a square planar complex con-taining two [(S)-NHCMes,iBu](-) ligands coordinated in a kappa(2)-C,O fashion, where the carbene and carboxylate donors have the expected trans configuration. The existence of two possible conformers of complexes 2 and 3 was analyzed using DFT methods., Ministerio de Ciencia e Innovación, Universidad de Alcalá, Comunidad de Madrid, Junta de Andalucía, European Social Fund
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

PVA-PVP-montmorillonite nanocomposite for efficient delivery of doxorubicin to breast cancer cells

  • Amini, Javid
  • Pourmadadi, Mehrab
  • Yazdian, Fatemeh
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Breast cancer is a significant issue for women globally, and conventional cancer treatments have limitations in controlling the disease. Thus, it is crucial to design effective platforms for precise, tailored and targeted drug delivery. For such purpose, novel polyvinyl alcohol-polyvinylpyrrolidone-montmorillonite (PVA-PVP-MMT) nanocomposite with ratio of 1:2:1 (w/v%) has been designed herein for the delivery of doxorubicin (Dox) as a model drug to MCF-7 breast cancer cells. The nanocomposite has been characterized by different analytical techniques, including FT-IR, XRD, DLS, and FE-SEM. DLS and zeta potential measurements revealed an average hydrodynamic diameter of 402 nm and a nanocarrier surface charge of 42 mV, respectively. According to FESEM analysis, its size ranges from 200 nm to 340 nm and it shows semi -spherical and step -like morphologies. Drug release data revealed a pH -sensitive delivery (22 % and 37 % for pH 7.4 and 5.4 within 6 h, respectively) and in a controlled manner (about 50 % within 48 h). Biomedical tests, including MTT and apoptosis, were carried out to study the cancer cell suppression efficiency of PVA-PVP-Dox-MMT. The MTT assay indicated 42 % cytotoxicity after 24 h of treatment with the nanocarrier, and the flow cytometry demonstrated 40 % apoptosis. The results of this study support that the developed PVA-PVP-Dox-MMT nanocarrier is an effective drug delivery platform and a very promising candidate for cancer treatment., Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Enhancing resilience of boreal forests through management under global change: a review

  • Triviño, María
  • Potterf, María
  • Tijerín Triviño, Julián|||0000-0001-9576-4780
  • Ruiz Benito, Paloma|||0000-0002-2781-5870
  • Burgas, Daniel
  • Eyvindson, Kyle
  • Blattert, Clemens
  • Mönkkönen, Mikko
  • Duflot, Remi
Purpose of Review Boreal forests provide a wide range of ecosystem services that are important to society. The boreal biome is experiencing the highest rates of warming on the planet and increasing demand for forest products. Here, we review how changes in climate and its associated extreme events (e.g., windstorms) are putting at risk the capacity of these forests to continue providing ecosystem services. We further analyze the role of forest management to increase forest resilience to the combined effects of climate change and extreme events. Recent Findings Enhancing forest resilience recently gained a lot of interest from theoretical perspective. Yet, it remains unclear how to translate the theoretical knowledge into practice and how to operationalize boreal forest management to maintain forest ecosystem services and functions under changing global conditions. We identify and summarize the main management approaches (natural disturbance emulation, landscape functional zoning, functional complex network, and climate-smart forestry) that can promote forest resilience. Summary We review the concept of resilience in forest sciences, how extreme events may put boreal forests at risk, and how management can alleviate or promote such risks. We found that the combined effects of increased temperatures and extreme events are having negative impacts on forests. Then, we discuss how the main management approaches could enhance forest resilience and multifunctionality (simultaneous provision of high levels of multiple ecosystem services and species habitats). Finally, we identify the complementary strengths of individual approaches and report challenges on how to implement them in practice., Universidad de Alcalá, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Una aproximación al avance de las herramientas basadas en inteligencia artificial generativa para la evaluación lingüística de idiomas: un análisis DAFO, Uma abordagem para o avanço de ferramentas baseadas na inteligência artificial gerativa para avaliação linguística de línguas: uma análise SWOT, An approach to the advance of tools based on generative artificial intelligence for language assessment: a SWOT analysis

  • García Laborda, Jesús|||0000-0003-0125-4611
  • Magal Royo, Teresa
  • Fernández Álvarez, Miguel
Este artículo analiza la integración de la Inteligencia Artificial (IA) Generativa en la evaluación lingüística de idiomas. Utilizando un enfoque mixto, se revisa literatura especializada y se recopilan datos a través de encuestas y entrevistas con profesionales educativos, para comprender las tendencias y desafíos de estas herramientas. Los resultados indican que, aunque las aplicaciones de IA son eficientes y adaptables a necesidades individuales, enfrentan retos significativos, incluyendo cuestiones éticas y resistencia al cambio por parte de docentes y estudiantes. Finalmente, se concluye la necesidad de una planificación estratégica y cuidadosa para incorporar eficazmente la IA en la educación lingüística, mejorando las metodologías de enseñanza y evaluación., Este artigo analisa a integração da Inteligência Artificial (IA) Generativa na avaliação linguística de idiomas. Utilizando uma abordagem mista, revisa-se a literatura especializada e coletam-se dados por meio de pesquisas e entrevistas com profissionais da educação, para compreender as tendências e desafios dessas ferramentas. Os resultados indicam que, embora as aplicações de IA sejam eficientes e adaptáveis às necessidades individuais, enfrentam desafios significativos, incluindo questões éticas e resistênciaà mudança por parte de professores e estudantes. Finalmente, conclui-se a necessidade de um planejamento estratégico e cuidadoso para incorporar eficazmente a IA na educação linguística, melhorando as metodologias de ensino e avaliação., This article examines the integration of Generative Artificial Intelligence (AI) in language assessment. Employing a mixed approach, it reviews specialized literature and collects data through surveys and interviews with educational professionals, to understand the trends and challenges of these tools. The results indicate that while AI applications are efficient and adaptable to individual needs,they face significant challenges, including ethical issues and resistance to change by teachers and students. Finally, it concludes the necessity of strategic and careful planning to effectively incorporate AI in language education, improving teaching andassessment methodologies., Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Dispersive Solid Phase Extraction of Melatonin with Graphene/Clay Mixtures and Fluorescence Analysis in Surfactant Aqueous Solutions

  • Gutiérrez Fernández, Lucía|||0000-0003-1500-8593
  • Díez Pascual, Ana María|||0000-0001-7405-2354
  • San Andrés Lledó, María Paz|||0000-0002-1500-4528
In this work, the dispersive solid phase extraction (dSPE) of melatonin using graphene (G) mixtures with sepiolite (SEP) and bentonite (BEN) clays as sorbents combined with fluorescence detection has been investigated. The retention was found to be quantitative for both G/SEP and G/BEN 4/96 and 10/90 w/w mixtures. G/clay 4/96 w/w mixtures were selected to study the desorption process since the retention was weaker, thus leading to easier desorption. MeOH and aqueous solutions of the nonionic surfactant Brij L23 were tested as desorbents. For both clays and an initial sample volume of 25 mL, a percentage of melatonin recovery close to 100% was obtained using 10 or 25 mL of MeOH as desorbent. Further, using a G/SEP mixture, 25 mL as the initial sample volume and 5 mL of MeOH or 60 mM Brij L23 solution as the desorbent, recoveries of 98.3% and 90% were attained, respectively. The whole method was applied to herbal tea samples containing melatonin, and the percentage of agreement with the labeled value was 86.5%. It was also applied to herbal samples without melatonin by spiking them with two concentrations of this compound, leading to recoveries of 100 and 102%., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

pH-sensitive polyacrylic acid /Fe3O4@SiO2 hydrogel nanocomposite modified with agarose for controlled release of quercetin

  • Mohammadi, Zahra Sadat
  • Pourmadadi, Mehrab
  • Abdous, Majid
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
  • Jafari, Seyed Hassan
Cancer has consistently been a significant global concern as the leading second cause of death. Improving the performance of chemical methods using a drug delivery system is an alternative approach to cancer treatment. In this study, the delivery of an anti-cancer drug, quercetin (QC), was investigated by placing it in a pH-sensitive hydrogel nanocomposite made of polyacrylic acid (PAA), agarose, and Fe3O4@SiO2 particles. Then, the drug release control was improved by the double emulsion method. Spherical nanoparticles with a smooth surface morphology were observed in the images obtained through field-emission scanning electron microscopy (FESEM), their average size was determined to be 193 nm using dynamic light scattering (DLS) method, and they exhibited a zeta potential of 38 mV. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses provided evidence of the interactions and chemical bonds in the hydrogel structure. The magnetic properties of the nanocarrier were studied by vibrating-sample magnetometry (VSM). The amount of drug loaded in the PAA-Agarose/Fe3O4@SiO2 increased to 86 %, while the encapsulation efficiency increased to 48 %. Drug release kinetics at physiological (7.4) and acidic (5.4) pH were best fitted with the Korsmeyer-Peppas model, indicating a non-Fickian diffusion mechanism. The U-87 MG glioma cell line was evaluated for toxicity through cytotoxicity assay (MTT) and flow cytometry. A higher percentage of apoptosis was found in PAA-Agarose/ Fe3O4@SiO2-QC compared to the free QC system. The findings corroborate that the approach developed herein is highly effective for pH-responsive drug delivery in cancer treatment applications., Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Identifying and characterising urban land use transformation processes using cadastral parcel geometries : a case study of Spanish cities

  • Shurupov, Nikolai|||0000-0001-8005-9763
  • Aguilera Benavente, Francisco Israel|||0000-0001-5710-2057
Cadastral vector data has become particularly important in urban studies due to its ability to accurately represent different urban realities, such as vulnerability assessment, densification processes and the development of simulation models. This paper proposes a framework for analysing changes in cadastral parcels in Spanish cities, identifying transformation process involving geometric and land use changes. Land use maps were obtained for two dates, one in 2022 and another in 2024, covering 48 Spanish cities and consisting of six categories: single-family residential, multi-family residential, industrial, commercial and office, others and undeveloped. The framework combines thematic and spatial analyses, intersection operations, graph construction, and geometric characterisation of changes through different spatial metrics of parcels. The results revealed three main processes affecting cadastral parcels: Aggregating, Subdividing and Non-impactful. These processes mainly affected on undeveloped land with varying geometric characteristics. Large parcels with complex shapes were transformed into simple and elongated parcels through Subdividing processes, while average-sized parcels with simple shapes were transformed into compact, more complex parcels through Aggregating processes. These results provide insights into how urban spaces are evolving not only in terms of land use change, but also through transformations in parcel geometry. This opens several future research lines grounded on the monitoring of cadastral data, such as urban densification studies, policy impact assessment and urban growth simulation models coupled with parcel transformation algorithms., Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

  • Sargazi, Saman
  • Fatima, Iqra
  • Hassan Kiani, Maria
  • Mohammadzadeh, Vahideh
  • Arshad, Rabia
  • Bilal, Muhammad
  • Radhar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nano -biosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associ-ated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharma-ceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence tech-nology, material chemistry, coordination polymers, and related research areas.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of HDI-Modified GO on the Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene):Poly(Styrenesulfonate) Nanocomposite Films

  • Luceño Sánchez, José Antonio
  • Charas, Ana
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Composite films based on conducting polymers and carbon nanomaterials have attracted much attention for applications in various devices, such as chemical sensors, light-emitting diodes (LEDs), organic solar cells (OSCs), among others. Graphene oxide (GO) is an ideal filler for polymeric matrices due to its unique properties. However, GO needs to be functionalized to improve its solubility in common solvents and enable the processing by low-cost solution deposition methods. In this work, hexamethylene diisocyanate (HDI)-modified GO and its nanocomposites with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) were developed, and their morphology, thermal, electrical, thermoelectrical and mechanical performance were characterized. The influence of the HDI functionalization degree and concentration on the nanocomposite properties were assessed. The HDI-GO increased the crystallinity, lamella stacking and interchain coupling of PEDOT:PSS chains. A strong improvement in electrical conductivity, thermal stability, Young's modulus and tensile strength was found, showing an optimum combination at 2 wt% loading. Drop and spin casting techniques were applied onto different substrates, and the results from deposition tests were analyzed by atomic force microscopy (AFM) and UV-vis spectroscopy. A number of parameters influencing the depositions process, namely solvent nature, sonication conditions and ozone plasma treatment, have been explored. This study paves the way for further research on conducting polymer/modified GO nanocomposites to optimize their composition and properties (i.e., transparency) for use in devices such as OSCs., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of graphene oxide on the properties of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate)

  • Díez Pascual, Ana María|||0000-0001-7405-2354
The main shortcomings of polyhydroxybutyrate (PHB), which is a biodegradable and biocompatible polymer used for biomedical and food packaging applications, are its low thermal stability, poor impact resistance and lack of antibacterial activity. This issue can be improved by blending with other biodegradable polymers such as polyhydroxyhexanoate to form poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx), which is a copolymer with better impact strength and lower melting point. However, PHBHHx shows reduced stiffness than PHB and poorer barrier properties against moisture and gases, which is a drawback for use in the food industry. In this regard, novel biodegradable PHBHHx/graphene oxide (GO) nanocomposites have been prepared via a simple, cheap and environmentally friendly solvent casting method to enhance the mechanical properties and antimicrobial activity. The morphology, mechanical, thermal, barrier and antibacterial properties of the nanocomposites were assessed via several characterization methods to show the enhancement in the biopolymer properties. The stiffness and strength of the biopolymer were enhanced up to 40% and 28%, respectively, related to the strong matrix-nanofiller interfacial adhesion attained via hydrogen bonding interactions. Moreover, the nanocomposites showed superior thermal stability (as far as 40 degrees C), lower water uptake (up to 70%) and better gas and vapour barrier properties (about 45 and 35% reduction) than neat PHBHHx. They also displayed strong biocide action against Gram positive and Gram negative bacteria. These bio-based nanocomposites with antimicrobial activity offer new perspectives for the replacement of traditional petroleum-based synthetic polymers currently used for food packaging., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Environmentally friendly synthesis of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)/SnO2 nanocomposites

  • Díez Pascual, Ana María|||0000-0001-7405-2354
Conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is widely used for practical applications such as energy conversion and storage devices owing to its good flexibility, processability, high electrical conductivity, and superior optical transparency, among others. However, its hygroscopic character, short durability, and poor thermoelectric performance compared to inorganic counterparts has greatly limited its high-tech applications. In this work, PEDOT:PSS/SnO2 nanocomposites have been prepared via a simple, low cost, environmentally friendly method without the use of organic solvents or compatibilizing agents. Their morphology, thermal, thermoelectrical, optical, and mechanical properties have been characterized. Electron microscopy analysis revealed a uniform dispersion of the SnO2 nanoparticles, and the Raman spectra revealed the existence of very strong SnO2-PEDOT:PSS interactions. The stiffness and strength of the matrix gradually increased with increasing SnO2 content, up to 120% and 65%, respectively. Moreover, the nanocomposites showed superior thermal stability (as far as 70 degrees C), improved electrical conductivity (up to 140%), and higher Seebeck coefficient (about 80% increase) than neat PEDOT:PSS. On the other hand, hardly any change in optical transparency was observed. These sustainable nanocomposites show considerably improved performance compared to commercial PEDOT:PSS, and can be highly useful for applications in energy storage, flexible electronics, thermoelectric devices, and related fields., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A New Method for Current-Voltage Curve Prediction in Photovoltaic Modules

  • Peña Capilla, Rafael|||0000-0002-7554-2029
  • Díez Pascual, Ana María|||0000-0001-7405-2354
  • García Díaz, María del Pilar|||0000-0002-5361-6947
  • Velasco Davoise, Lara|||0000-0002-6608-5938
In this work, a new method for obtaining the current-voltage curve for crystalline silicon and thin-film flat panels is presented. It is based on the single-diode model, with a variable shunt resistance and series resistance. New expressions for the shunt resistance and open circuit voltage as a function of the temperature and irradiance are deduced. Besides, a procedure to translate the series resistance to arbitrary conditions is proposed. The diode ideality factor and shunt resistance are obtained by optimization. The rest of the parameters that appear in the current-voltage curve are obtained from the module measurements by means of theoretical expressions. The procedure for obtaining the current-voltage curve under arbitrary operating conditions is also described. The results obtained with the developed model are compared with experimental measurements in cadmium telluride and amorphous silicon modules, and with results published in the literature for other technologies. The model faithfully reproduces the experimental values. For all the modules, the root mean square error for the maximum power is lower than 2% (below 1.5% in most cases). These errors are lower than those reported in the literature for other models. In particular, the results are significantly more exact in the case of thin-film modules., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Antibacterial Activity of Polymer Nanocomposites Incorporating Graphene and Its Derivatives: A State of Art

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Development of Graphene-Based Polymeric Nanocomposites: A Brief Overview

  • Díez Pascual, Ana María|||0000-0001-7405-2354
Graphene (G) and its derivatives, such as graphene oxide (GO) and reduced GO (rGO), have outstanding electrical, mechanical, thermal, optical, and electrochemical properties, owed to their 2D structure and large specific surface area. Further, their combination with polymers leads to novel nanocomposites with enhanced structural and functional properties due to synergistic effects. Such nanocomposites are becoming increasingly useful in a wide variety of fields ranging from biomedicine to the electronics and energy storage applications. In this review, a brief introduction on the aforementioned G derivatives is presented, and different strategies to develop polymeric nanocomposites are described. Several functionalization methods including covalent and non-covalent approaches to increase their interaction with polymers are summarized, and selected examples are provided. Further, applications of this type of nanocomposites in the field of energy are discussed, including lithium-ion batteries, supercapacitors, transparent conductive electrodes, counter electrodes of dye-sensitized solar cells, and active layers of organic solar cells. Finally, the challenges and future outlook for G-based polymeric nanocomposites are discussed., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with ZnO nanoparticles for food packaging

  • Díez Pascual, Ana María|||0000-0001-7405-2354
El poli (3-hidroxibutirato) (PHB) es un biopoliéster biodegradable sintetizado mediante fermentación bacteriana a partir de recursos renovables que ha recibido gran atención en los últimos años para aplicaciones de envasado de medicamentos y alimentos. Sin embargo, presenta varias deficiencias, como una ventana de procesamiento estrecha y una alta cristalinidad, lo que conduce a una fragilidad y una baja resistencia al impacto. Para resolver estos inconvenientes, las unidades de hidroxibutirato se pueden copolimerizar con otros monómeros, como se ha hecho en este trabajo, con la incorporacion de nanoparticulas de ZnO. Se investigaron sus propiedades morfológicas, mecánicas, térmicas, de barrera y antibacterianas mediante microscopía electrónica de transmisión, pruebas de resistencia a la tracción y al impacto, análisis termogravimétrico, mediciones de permeabilidad al vapor de agua y oxígeno, así como pruebas antibacterianas., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

State of the art in the antibacterial and antiviral applications of carbon-based polymeric nanocomposites

  • Díez Pascual, Ana María|||0000-0001-7405-2354
The development of novel approaches to prevent bacterial infection is essential for enhancing everyday life. Carbon nanomaterials display exceptional optical, thermal, and mechanical properties combined with antibacterial ones, which make them suitable for diverse fields, including biomedical and food applications. Nonetheless, their practical applications as antimicrobial agents have not been fully explored yet, owing to their relatively poor dispersibility, expensiveness, and scalability changes. To solve these issues, they can be integrated within polymeric matrices, which also exhibit antimicrobial activity in some cases. This review describes the state of the art in the antibacterial applications of polymeric nanocomposites reinforced with 0D fullerenes, 1D carbon nanotubes (CNTs), and 2D graphene (G) and its derivatives such as graphene oxide (GO) and reduced graphene oxide (rGO). Given that a large number of such nanocomposites are available, only the most illustrative examples are described, and their mechanisms of antimicrobial activity are discussed. Finally, some applications of these antimicrobial polymeric nanocomposites are reviewed., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A multifunctional polymeric micelle for targeted delivery of paclitaxel by the inhibition of the P-glycoprotein transporters

  • Razzaq, Sobia
  • Rauf, Aisha
  • Raza, Abida
  • Akhtar, Sohail
  • Díez Pascual, Ana María|||0000-0001-7405-2354
P-glycoprotein (P-gP) efflux-mediated multidrug resistance is a fundamental aspect of chemotherapeutic failure in oncology. The current study aims to deliver paclitaxel (PTX) specifically at the target site with improved in vivo efficacy of poorly permeable PTX against solid tumors. Multifunctional polymeric micelles as targeted delivery have been devised for loading and release of PTX. Mucoadhesion, permeation enhancement, oral pharmacokinetics, biodistribution, and toxicological studies were carried out to fully elucidate the therapeutic outcomes of the polymeric micelles. Ex vivo permeation studies indicated a 7.89-fold enhancement in the permeation of PTX with mucopermeating papain functionalized thiolated redox micelles (PT-R-Ms) compared to the pure PTX. Moreover, PT-R-Ms exhibited a higher percentage of apoptotic cells (42.9 & PLUSMN; 0.07%) compared to pure PTX. Biodistribution studies revealed that fluorotagged PT-RMs accumulated in excised tumors and organs. The higher fluorescence intensity indicated the mucopermeation of micelles across the intestine. The orally administered PT-R-Ms efficiently overcome intestinal barriers and inhibit the P-gP efflux pump, resulting in increased bioavailability of PTX (up to 8-fold) in comparison to pure PTX. The enhanced anti-tumor efficacy and reduced toxic effects are key aspects of efficient cancer therapy. This study demonstrates that the use of mucopermeating PT-R-Ms is an encouraging approach to overwhelm the permeation barrier in cancer treatment., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Active Targeted of Nanoparticles for Delivery of Poly(ADP ribose) Polymerase (PARP) Inhibitors: A Preliminary Review

  • Sargazi, Saman
  • Rahdar, Abbas
  • Barani, Mahmood
  • Pandey, Sadanand
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Nanotechnology has revolutionized novel drug delivery strategies through establishing nanoscale drug carriers, such as niosomes, liposomes, nanomicelles, dendrimers, polymeric micelles, and nanoparticles (NPs). Owing to their desirable cancer-targeting efficacy and controlled release, these nanotherapeutic modalities are broadly used in clinics to improve the efficacy of small-molecule inhibitors. Poly(ADP-ribose) polymerase (PARP) family members engage in various intracellular processes, including DNA repair, gene transcription, signal transduction, cell cycle regulation, cell division, and antioxidant response. PARP inhibitors are synthetic small-molecules that have emerged as one of the most successful innovative strategies for targeted therapy in cancer cells harboring mutations in DNA repair genes. Despite these advances, drug resistance and unwanted side effects are two significant drawbacks to using PARP inhibitors in the clinic. Recently, the development of practical nanotechnology-based drug delivery systems has tremendously improved the efficacy of PARP inhibitors. NPs can specifically accumulate in the leaky vasculature of the tumor and cancer cells and release the chemotherapeutic moiety in the tumor microenvironment. On the contrary, NPs are usually unable to permeate across the body's normal organs and tissues; hence the toxicity is zero to none. NPs can modify the release of encapsulated drugs based on the composition of the coating substance. Delivering PARP inhibitors without modulation often leads to the toxic effect; therefore, a delivery vehicle is essential to encapsulate them. Various nanocarriers have been exploited to deliver PARP inhibitors in different cancers. Through this review, we hope to cast light on the most innovative advances in applying PARP inhibitors for therapeutic purposes., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Novel Perspectives towards RNA-Based Nano-Theranostic Approaches for Cancer Management

  • Arshad, Rabia
  • Fatima, Iqra
  • Sargazi, Saman
  • Rahdar, Abbas
  • Karamzadeh-Jahromi, Milad
  • Pandey, Sadanand
  • Díez Pascual, Ana María|||0000-0001-7405-2354
In the fight against cancer, early diagnosis is critical for effective treatment. Traditional cancer diagnostic technologies, on the other hand, have limitations that make early detection difficult. Therefore, multi-functionalized nanoparticles (NPs) and nano-biosensors have revolutionized the era of cancer diagnosis and treatment for targeted action via attaching specified and biocompatible ligands to target the tissues, which are highly over-expressed in certain types of cancers. Advancements in multi-functionalized NPs can be achieved via modifying molecular genetics to develop personalized and targeted treatments based on RNA interference. Modification in RNA therapies utilized small RNA subunits in the form of small interfering RNAs (siRNA) for overexpressing the specific genes of, most commonly, breast, colon, gastric, cervical, and hepatocellular cancer. RNA-conjugated nanomaterials appear to be the gold standard for preventing various malignant tumors through focused diagnosis and delivering to a specific tissue, resulting in cancer cells going into programmed death. The latest advances in RNA nanotechnology applications for cancer diagnosis and treatment are summarized in this review, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Amino Acids, Peptides, and Proteins: Implications for Nanotechnological Applications in Biosensing and Drug/Gene Delivery

  • Er, Simge
  • Laraib, Ushna
  • Arshad, Rabia
  • Sargazi, Saman
  • Rahdar, Abbas
  • Díez Pascual, Ana María|||0000-0001-7405-2354
Over various scientific fields in biochemistry, amino acids have been highlighted in research works. Protein, peptide- and amino acid-based drug delivery systems have proficiently transformed nanotechnology via immense flexibility in their features for attaching various drug molecules and biodegradable polymers. In this regard, novel nanostructures including carbon nanotubes, electrospun carbon nanofibers, gold nanoislands, and metal-based nanoparticles have been introduced as nanosensors for accurate detection of these organic compounds. These nanostructures can bind the biological receptor to the sensor surface and increase the surface area of the working electrode, significantly enhancing the biosensor performance. Interestingly, protein-based nanocarriers have also emerged as useful drug and gene delivery platforms. This is important since, despite recent advancements, there are still biological barriers and other obstacles limiting gene and drug delivery efficacy. Currently available strategies for gene therapy are not cost-effective, and they do not deliver the genetic cargo effectively to target sites. With rapid advancements in nanotechnology, novel gene delivery systems are introduced as nonviral vectors such as protein, peptide, and amino acid-based nanostructures. These nano-based delivery platforms can be tailored into functional transformation using proteins and peptides ligands based nanocarriers, usually overexpressed in the specified diseases. The purpose of this review is to shed light on traditional and nanotechnology-based methods to detect amino acids, peptides, and proteins. Furthermore, new insights into the potential of amino protein-based nanoassemblies for targeted drug delivery or gene transfer are presented., Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Analysis performance of wavelet OFDM in mobility platforms

  • Pinto Benel, Freddy Albert
  • Blanco Velasco, Manuel|||0000-0001-6593-1517
  • Cruz Roldán, Fernando|||0000-0001-6843-5199
Wavelet orthogonal frequency division multiplexing (OFDM) is one of the medium access techniques recommended by the IEEE 1901 working group for broadband communications over electrical networks, and is under consideration for IoT applications. This standard provides a flexible architecture supporting integrated access, smart grid, building, in-home, and mobility platform (vehicle) applications. Wavelet OFDM is a filter bank multicarrier system based on the extended lapped transform, in which the transmitting and receiving filters are obtained from a waveform provided by the standard. In this paper, we explore system performance when other waveforms are employed, studying the trade-off between stopband attenuation and transition band width. Furthermore, an alternative and more efficient way of obtaining the theoretical expressions of the achievable data rate is shown, assuming realistic power line communication noise other than additive white Gaussian noise. To demonstrate the capabilities of wavelet OFDM, the results of simulation of the symbol error rate and the data rate in several systems in platform scenarios (in-vehicle and in-aircraft) are shown., Universidad de Alcalá