Pasar al contenido principal

DE RESIDUOS AGRICOLAS A BIOPLASTICOS AVANZADOS USANDO CATALIZADORES BASADOS EN METALES ABUNDANTES

RTI2018-094840-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(glycidyl methacrylate) macromolecular assemblies as biocompatible nanocarrier for the antimicrobial lysozyme

  • Palenzuela, Miguel
  • Valenzuela, Laura
  • Amariei, G.
  • Vega, Juan Francisco
  • Mosquera, Marta E. G.
  • Rosal, Roberto
The antimicrobial lysozyme (Lys) was electrostatically incorporated to negatively charged crosslinked poly(glycidyl methacrylate) (c-PGMA) macromolecular assemblies. The resulting material was characterized by AFM, infrared spectra, water contact angle measurements and the staining with the primary amino specific dye fluorescamine. c-PGMA nanoparticles were successfully loaded with Lys reaching ratios of 27.3 ± 4.0 and 22.5 ± 1.7 mg Lys/g polymer for c-PGMA suspensions and functionalized glass substrates, respectively. Lys-loaded c-PGMA caused clear inhibition zones on S. aureus and E. coli in comparison to neat c-PGMA. c-PGMA functionalized surfaces were intrinsically resistant to colonization, but the incorporation of Lys added resistance to bacterial attachment and allowed keeping surfaces clean of bacterial cells for both strains. A relatively rapid release (24 h) of Lys was observed at physiological pH (7.4). In addition, c-PGMA functionalized substrates could be reloaded several times without losing capacity. c-PGMA macromolecular assemblies did not display cytotoxicity to human dermal fibroblasts as shown in 24 h MTT assays. This work demonstrated that c-PGMA assemblies display durable antibacterial activity, biocompatibility, and full reloading capacity with antimicrobial peptides. c-PGMA functionalized materials have potential application as nanocarriers for anti-infective uses., The authors acknowledge the funding provided by the Spanish Government (RTI2018-094840-B-C31) and the University of Alcala (CCG19/CC-037). LV thanks for FPU grant FPU17/03096 (Spanish Ministry of Education). GA thanks the University of Alcala for her postdoctoral fellowship. MP thanks the University of Alcala for his predoctoral fellowship. We thank ICTS “NANBIOSIS” for the Confocal Microscopy Service and TEM-Biophym Service (V. Souza-Egipsy) at the IEM-CSIC for the use of the facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stereospecific synthesis of chiral titanium complexes bearing a bifunctionalized cyclopentadienyl-terpenoid ligand derived from α-pinene

  • Reviejo, I.
  • Vinueza, Joan
  • Ramos, Javier
  • Mosquera, Marta E. G.
  • Tabernero, Vanessa
  • Jiménez, Gerardo
11 pags., 6 figs., 6 schs., The reaction of the complexes [Ti(η5- C5H3R′SiMe2Cl)Cl3] (R′ = H, SiMe3 ) with the terpenoid preligand C7H6Me3(OH)(NCH2CH2NH2) affords the stereospecific synthesis of the constrained-geometry chiral titanium complexes [Ti{(η5-C5H3R′SiMe2N(CH2)2NC7H6Me3O)- κ3N,N′,O}Cl] (R′ = H, 1; R′ = SiMe3 2), bearing a new cyclopentadienyl-terpenoid ligand derived from α-pinene. The corresponding alkyl derivatives [Ti{(η5-C5H4SiMe2N- (CH2)2NC7H6Me3O)-κ3N,N′,O}R] (R = Me, 4; R = nBu, 5) have been prepared by treatment with suitable alkylating reagents. The reactivity of the methyl complex 4 with different protonic reagents such as alcohols and thiols proceeds via protonation of the amido nitrogen to stereospecifically give the corresponding strain-free alkoxide- and thiolate-methyl compounds [Ti{(η5- C5H4SiMe2NH(CH2)2NC7H6Me3O)-κO}Me(XR)] (X = O, R = iPr, 6; X = S, R = Et, 7; R = p-MeC6H4, 8). The reversibility of this protonation reaction is observed in the case of the thiolate compounds, which are thermically converted, via methane release, into the corresponding constrained-geometry thiolate derivatives [Ti{(η5-C5H4SiMe2N(CH2)2NC7H6Me3O)-κ3N,N′,O}(SR)] (R = Et, 9; R = C6H4-p-Me, 10). However, the analogous alkoxide-methyl compound 6 does not undergo a similar transformation. To gain further insights into the results reached in the reactions of 4 with alcohols and thiols and to understand the different behavior of the strain-free alkoxide- and thiolate-methyl complexes with regard to the thermal decomposition, calculations using DFT methods have been performed., Ministerio de Ciencia, Innovacion y Universidades (project RTI2018−094840−B-C31) and Universidad de Alcalá (project UAH-AE-2017−2)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rheology of Poly(glycidyl methacrylate) Macromolecular Nano Assemblies

  • Cardil, Andrés
  • Palenzuela, Miguel
  • Vega, Juan Francisco
  • Mosquera, Marta E. G.
A recently reported combined polymerization process of glycidyl methacrylate, mediated by homometallic and heterobimetallic aluminium complexes, naturally produces nano-sized macromolecular assemblies. In this work, the morphological features and the rheological properties of these novel nanoassemblies are studied. The hydrodynamic sizes of the nanoparticles in the solution range from 10 to 40 nm (in numbers), but on a flat surface they adopt a characteristic thin disk shape. The dynamic moduli have been determined in a broad range of temperatures, and the time—temperature superposition applied to obtain master curves of the whole viscoelastic response from the glassy to the terminal regions. The fragility values obtained from the temperature dependence are of m ~40, typical of van de Waals liquids, suggesting a very effective packing of the macromolecular assemblies. The rheological master curves feature a characteristic viscoelastic relaxation with the absence of elastic intermediate plateau, indicating that the systems behaved as un-entangled polymers. The analysis of the linear viscoelastic fingerprint reveals a Zimm-like dynamics at intermediate frequencies typical of unentangled systems. This behaviour resembles that observed in highly functionalized stars, dendrimers, soft colloids and microgels., Financial support from Spanish Government (RTI2018-094840-B-C31 and AEI PID2019-107710GB-I00), the Alcalá University, Spain (CCG19/CC-037) and Madrid Regional Government (EPU-INV/2020/001) are gratefully acknowledged. M.P. thanks the Universidad de Alcalá for a Pre-doctoral Fellowship., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Terpenes and Terpenoids: Building Blocks to Produce Biopolymers

  • Tabernero Magro, María Vanessa|||0000-0003-1054-1663
  • Jiménez Pindado, Gerardo Javier|||0000-0002-7057-4750
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Vinueza Vaca, Joan Martín|||0000-0002-0885-6394
  • García-Estrada, Carlos
  • Kosalková, Katarina
  • Sola Landa, Alberto
  • Monje, Belén
  • Acosta, Carolina
  • Alonso, Rafael
  • Valera, Miguel Angel
Polymers are essential materials in our daily life. The synthesis of value-added polymers is mainly performed from fossil fuel-derived monomers. However, the adoption of the circular economy model based on the bioeconomy will reduce the dependence on fossil fuels. In this context, biorefineries have emerged to convert biomass into bioenergy and produce high value-added products, including molecules that can be further used as building blocks for the synthesis of biopolymers and bioplastics. The achievement of catalytic systems able to polymerize the natural monomer counterparts, such as terpenes or terpenoids, is still a challenge in the development of polymers with good mechanical, thermal, and chemical properties. This review describes the most common types of bioplastics and biopolymers and focuses specifically on the polymerization of terpenes and terpenoids, which represent a source of promising monomers to create bio-based polymers and copolymers, Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá