Pasar al contenido principal

Estructura y dinámica de materiales poliméricos

IJCI-2017-31600

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadband dielectric spectroscopy to validate architectural features in Type-A polymers: Revisiting the poly(glycidyl phenyl ether) case

  • Martínez-Tong, Daniel E.
  • Ochs, Jordan
  • Barroso-Bujans, Fabienne
  • Alegría, Ángel
Broadband dielectric spectroscopy (BDS) is a powerful technique that allows studying the molecular dynamics of materials containing polar entities. Among a vast set of different applications, BDS can be used as a complementary tool in polymer synthesis. In this work, we will show how BDS can be used to validate architectural features in Type-A polymers, those having a net dipole moment component along the chain contour. Specifically, we will focus on the evaluation of the dielectric relaxation of poly(glycidyl phenyl ether) (PGPE) samples designed and synthesized with a variety of topologies and regio-orders: linear regio-regular chains synthesized from monofunctional and bifunctional initiators, macrocyclic regio-regular chains, and linear and macrocyclic regio-irregular chains. Our study highlights the impact of using BDS as a complementary characterization technique for providing topological details of polymers, which are otherwise not possible with many traditional techniques (e.g., NMR and mass spectrometry)., We gratefully acknowledge support from projects IT-1175-19 and PIBA 2018 1 0034 of the Basque Government, and project PGC2018-094548-B-I00 (MICINN-Spain and FEDERUE). D. E. M. acknowledges the Spanish Government “Ministerio de Ciencia, Innovacion y Universidades” for the “Juan de la Cierva – Incorporaci´on” grant (IJCI-2017-31600).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cure-Dependent Morphology of Acrylic/Alkyd Hybrid Latex Films via Nanomechanical Mapping

  • Limousin, Elodie
  • Martínez-Tong, Daniel E.
  • Ballard, Nicholas
  • Asua, José M.
Acrylic/alkyd hybrid latexes offer the potential to obtain hard films from waterborne polymer dispersions without using coalescing agents. However, despite being widely used commercially, the curing process of the alkyd resin used in such formulations, and its influence on the final film morphology, remain poorly understood. In this work, we explore the curing process and its influence on film morphology in alkyd/acrylic hybrid latexes by nanomechanical mapping of the film during curing. It is shown that, although acrylic domains aid oxygen diffusion and facilitate curing, the rate of curing was substantially lower in the interior. Nevertheless, homogeneous curing was achieved at long times. The role of primary and secondary catalysts in the process is also explored, finding that the variation of the rate of curing of the alkyd plays an influential role in the development of film structure due to phase migration of the two polymers as curing progresses. It is hoped this work goes some way to unraveling the mystery behind the curing process in acrylic/alkyd hybrid latex films., N.B. acknowledges the financial support obtained through the Post-Doctoral fellowship Juan de la Cierva− Incorporacion (No. IJCI-2016-28442), from the Ministry of ́ Economy and Competitiveness of Spain. D.E.M. acknowledges the financial support obtained through the Post-Doctoral fellowship Juan de la Cierva−Incorporacion (No. IJCI-2017- ́ 31600), from the Ministry of Economy and Competitiveness of Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of environmental humidity on the ionic transport of poly(ethylene oxide) thin films, investigated by local dielectric spectroscopy

  • Markus, Paul
  • Martínez-Tong, Daniel E.
  • Papastavrou, Georg
  • Alegría, Ángel
The effect of humidity on the ionic transport in the amorphous phase of poly(ethylene oxide) thin films has been studied by local dielectric spectroscopy. We explored a controlled humidity range between 15% RH and 50% RH. AFM-based local dielectric imaging allowed the thin film topography and the corresponding dielectric contrast maps to be obtained simultaneously. No humidity effect on the film topography was observed whereas large variation of the dielectric signal could be detected. In addition, we observed a clear dielectric contrast in different locations on the thin film surface. At selected regions with high contrast in the dielectric maps, we performed nanoDielectric Spectroscopy (nDS) measurements covering the frequency range from 5 Hz to 100 kHz. By modeling these spectroscopy results, we quantified the conductivity of the amorphous phase of the semicrystalline poly(ethylene oxide) films. The crystalline fraction of the PEO thin films was extracted and found to be about 36%, independently of humidity. However, the average conductivity increased by a factor of 25 from 2 × 10−10 to 5 × 10−9 S cm−1, by changing environmental humidity in the explored % RH range., This work was supported by the European Union: EUSMI, H2020-INFRAIA-2016-1, PROJECT 731019. A. A. acknowledges funding from Spanish Government “Ministerio de Ciencia, Innovacion y Universidades” (PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)), and Basque Government (IT-1175-19). D. E. M. acknowledges financial support via the “Juan de la Cierva – Incorporación” grant (IJCI-2017-31600, MCIU – Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling the dynamic development of the curing process and film morphology of films cast from waterborne acrylic-alkyd hybrids

  • Limousin, Elodie
  • González, Edurne
  • Martínez-Tong, Daniel E.
  • Ballard, Nicholas
  • Asua, José M.
The drying of waterborne acrylic-alkyd hybrids is a complicated process, involving both curing of the alkyd phase and evolution of the overall morphology of the film. Understanding this drying process is of great importance in practical application of these hybrids, where the physical properties of the film are dictated by the film microstructure. Here, a mathematical model for the curing of coatings cast from acrylic-alkyd hybrid waterborne dispersions is developed. The model provides the dynamic development of the crosslinking density through the film. Furthermore, it also provides the evolution of the morphology of the coating in term of the size distribution of alkyd domains. The model is compared with experimental data from literature and used to predict the effect of variables such as primary catalyst concentration and acrylic polymer content on curing., D.E.M. acknowledges financial by a “Juan de la Cierva – Incorporación” postdoctoral grant (IJCI-2017-31600, MCIU, Spain). The authors would like to acknowledge the financial support provided by the Basque Government (IT99-16) and the Industrial Liaison Program in Polymerization in Dispersed Media (3 M, Akzo Nobel, Allnex, Arkema, Asian Paints, BASF, DSM, Inovyn, Stahl, Solvay, Synthomer, Vinavil and Wacker)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wrinkling poly(trimethylene 2,5-furanoate) free-standing films: Nanostructure formation and physical properties

  • Soccio, Michelina
  • Lotti, Nadia
  • Munari, Andrea
  • Rebollar, Esther
  • Martínez-Tong, Daniel E.
Polymer nanostructures were developed on fully bio-based poly(trimethylene furanoate) (PTF) films, by using the technique of Laser Induced Periodic Surface Structures (LIPSS). We found that irradiation times between 1 and 8 min allowed the formation of periodic and nanometric ripples, when using an UV pulsed laser source at a fluence of 8 mJ/cm2. The wrinkled surfaces were studied by a combined macro- and nanoscale approach. We evaluated possible physicochemical changes taking place on the polymer surface after irradiation by infrared spectroscopy, contact angle measurements and atomic force microscopy. The macroscopic properties of PTF showed almost no changes after nanostructure formation, differently from the results previously found for the terephthalic counterparts, as poly(ethylene terephthalate), PET, and poly(trimethylene terephthalate), PTT. At the nanoscale, the surface mechanical properties of the nanostructured PTF were found to be improved, as evidenced by force spectroscopy measurements. In particular, stiffer surfaces characterized by an increased Young's modulus were measured for the nanostructured sample., This work has been supported by Ministry of Science, Innovation and Universities (MCIU, Spain) under the project CTQ2016-75880-P. D.E.M. acknowledges the financial support obtained through the Post-Doctoral fellowship “Juan de la Cierva – Incorporación” (IJCI-2017-31600, MCIU, Spain). E.R. thanks MCIU for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(alkylene 2,5-furanoate)s thin films: Morphology, crystallinity and nanomechanical properties

  • Robles-Hernández, Beatriz
  • Soccio, Michelina
  • Castrillo, Iker
  • Guidotti, Giulia
  • Lotti, Nadia
  • Alegría, Ángel
  • Martínez-Tong, Daniel E.
Poly(alkylene 2,5-furanoate)s are considered as the most attractive and interesting alternatives to replace oil-based terephthalic polymers. These furan-based polyesters can be synthesized using fully bio-based synthetic strategies, allowing to reduce the environmental impact of plastics. At the same time, these polymers have shown outstanding thermal, mechanical and gas-barrier properties. All these results envisage their industrial use in the near future. Now, considering the downscaling of the products' size towards the nanometer scale, we present a study of the morphology and nanomechanical properties of poly(alkylene 2,5-furanoate) thin films. Using Atomic Force Microscopy, we report the development of nanostructures upon crystallization, following different thermal treatments, for thin films with thicknesses below 200 nm. Moreover, we studied the impact of crystal growth in the nanomechanical properties of these materials. We found that the polymer thin films preserve their excellent mechanical response even in the confined geometry, as proved by the Young's moduli values close to the GPa, accompanied by high surface stiffness, and low indentation depths. The poly(alkylene 2,5-furanoate) thin films were found to have nanomechanical properties comparable to those of oil-based terephthalic polymers, a further evidence that in the future they could replace traditional polymers in several applications., D. E. M acknowledges financial support from “Ministerio de Ciencia, Innovación y Universidades” (MCIU), via a “Juan de la Cierva – Incorporación” grant (IJCI-2017-31600). B. R. and A. A. acknowledge funding from Basque Government (IT-1175-19). G. G., M. S. and N. L. acknowledge the Italian Ministry of University and Research. This publication is part of the framework COST Action FUR4Sustain, CA18220, supported by COST (European Cooperation in Science and Technology).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadband dielectric spectroscopy study of biobased poly(alkylene 2,5-furanoate)s’ molecular dynamics

  • Soccio, Michelina
  • Martínez-Tong, Daniel E.
  • Guidotti, Giulia
  • Robles-Hernández, Beatriz
  • Munari, Andrea
  • Lotti, Nadia
  • Alegría, Ángel
This article belongs to the Special Issue Synthesis, Characterization and Simulation of Soft Matter with EUSMI., Poly(2,5-alkylene furanoate)s are bio-based, smart, and innovative polymers that are considered the most promising materials to replace oil-based plastics. These polymers can be synthesized using ecofriendly approaches, starting from renewable sources, and result into final products with properties comparable and even better than those presented by their terephthalic counterparts. In this work, we present the molecular dynamics of four 100% bio-based poly(alkylene 2,5-furanoate)s, using broadband dielectric spectroscopy measurements that covered a wide temperature and frequency range. We unveiled complex local relaxations, characterized by the simultaneous presence of two components, which were dependent on thermal treatment. The segmental relaxation showed relaxation times and strengths depending on the glycolic subunit length, which were furthermore confirmed by high-frequency experiments in the molten region of the polymers. Our results allowed determining structure–property relations that are able to provide further understanding about the excellent barrier properties of poly(alkylene 2,5-furanoate)s. In addition, we provide results of high industrial interest during polymer processing for possible industrial applications of poly(alkylene furanoate)s., This research was funded by the European Union: EUSMI, H2020-INFRAIA-2016-1, PROJECT 731019, via proposals E171100043 and E171100040. The APC was funded by EUSMI. B.R.-H. and A.A. acknowledge funding from Basque Government (IT-1175-19). D.E.M.-T. acknowledges financial support via the postdoctoral fellowship “Juan de la Cierva–Incorporación” grant (IJCI-2017-31600, MCIU–Spain). G.G., M.S. and N.L. and A.M. acknowledge financial support via the framework COST Action FUR4Sustain, CA18220, supported by COST (European Cooperation in Science and Technology)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of nanostructure development from the molecular dynamics of poly(pentamethylene 2,5-furanoate)

  • Martínez-Tong, Daniel E.
  • Soccio, Michelina
  • Robles-Hernández, Beatriz
  • Guidotti, Giulia
  • Gazzano, Massimo
  • Lotti, Nadia
  • Alegría, Ángel
We report on the molecular origin of poly(pentamethylene 2,5-furanoate)’s particular physical properties. From the structural point of view, we found that this polymer can develop crystallinity when stored under room conditions for months. On the other hand, we used broadband dielectric spectroscopy measurements to analyze in great detail the local and segmental molecular dynamics of the material subjected to several thermal treatments. In this way, we evidenced that the molecular dynamics are sensitive to thermal history over a broad temperature range. This behavior has been attributed to possible interchain interactions detected via infrared spectroscopy and rheology measurements in the noncrystallized polymer., A.A. acknowledges funding from Spanish Government ‘‘Ministerio de Ciencia, Innovacion y Universidades’’ (PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)). A.A. and B.R.-H. acknowledge funding by Basque Government (IT-1175-19). D.E.M.-T. acknowledges the financial support obtained by the MCIU fellowship “Juan de la Cierva—Incorporación” (IJCI-2017-31600). This research was funded by the European Union: EUSMI, H2020-INFRAIA-2016-1, PROJECT 731019, via proposals E171100043 and E171100040. Authors acknowledge Dr. Elodie Limousin assistance for preparation of PPeF cross-sections. The authors thank Dr. Amaia Iturrospe for assistance in X-ray scattering measurements and Dr. Silvia Arrese-Igor for assistance in FTIR measurements. This publication is based upon work from Cost Action FUR4Sustain, supported by COST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triggering forces at the nanoscale: Technologies for single-chain mechanical activation and manipulation

  • Martínez-Tong, Daniel E.
  • Pomposo, José A.
  • Verde-Sesto, Ester
Over the past decades, polymer mechanochemistry has focused on the development and application of advanced force application methods to better understand the mechanochemical response of mechanophores. In this regard, techniques such as ultrasonication and single-molecule force spectroscopy (SMFS) are used to activate and detect up to thousands of chemical events within a polymer single chain, allowing the researchers to probe the mechanochemical reactivity of these stress-responsive motifs. Here, the most recent contributions of the single-molecule force spectroscopy technique to this field are presented, putting emphasis on the fundamental parameters of the technique for triggering specific force responses and on the description of force–extension curves measured for single- and multi-mechanophore polymers. Moreover, new contributions of microscopy-based techniques in the field of polymer mechanochemistry, as well as the potential application of single-chain nanoparticles as mechanoresponsive materials, are highlighted., J.A.P and E.V.-S gratefully acknowledge funding by Gipuzkoako Foru Aldundia-Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2019 (Grant No. 2019-CIEN-000050-01); Basque Government (Grant No. IT-1175-19); and MCIU/AEI/FEDER, UE (Grant No. PGC2018-094548-B-I00). E.V.-S acknowledges the Materials Physics Center-MPC for her postdoctoral grant. D.E.M.-T. acknowledges the financial support obtained by the MCIU fellowship “Juan de la Cierva—Incorporación” (IJCI-2017-31600)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cationic polymerization of β-pinene using B(C6F5)3 as a Lewis acid for the synthesis of tackifiers in pressure sensitive adhesives

  • Destephen, Aurélie
  • González de San Román, Estíbaliz
  • Martínez-Tong, Daniel E.
  • Ballard, Nicholas
β-pinene is a well-known bio-based monomer that can be polymerized via cationic polymerization to give low molecular weight resins that find use commercially as tackifiers. However, the controlled synthesis of these polymers by cationic polymerization is challenging due to the reactivity of commonly used Lewis acid catalysts and the propagating carbocationic species with water. Here, the cationic polymerization of β-pinene under mild conditions using the water stable Lewis acid tris(pentafluorophenyl)borane is demonstrated. It is shown that when combined with a suitable alcohol initiator the molecular weight of the polymer can be tuned while the kinetics are largely controlled by the concentration of tris(pentafluorophenyl)borane. The final poly(β-pinene) is shown to perform well as a tackifier in the formation of pressure sensitive adhesives based on polystyrene-b-polyisoprene-b-polystyrene triblock copolymers., N.B. acknowledges the financial support obtained from the Basque government (PI2017-59). The authors thank for technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). D.E.M.-T. acknowledges financial support from “Ministerio de Ciencia, Innovación y Universidades” (MCIU), via a “Juan de la Cierva – Incorporación” grant (IJCI-2017-31600)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication and nanoscale properties of PEDOT:PSS conducting polymer nanospheres

  • Sanviti, Matteo
  • Alegría, Ángel
  • Martínez-Tong, Daniel E.
Electrically conducting nanospheres of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) with tailored size were prepared using a solvent displacement technique. To fabricate these nanostructures, dried PEDOT:PSS was dissolved in ethylene glycol (EG) and the solution was precipitated in deionized water. The proposed fabrication route allowed obtaining a water-based dispersion of PEDOT:PSS nanospheres with good optical properties. To determine the physical properties of the nanospheres, we followed a nanoscale approach, using atomic force microscopy. Our nanoscale mechanical and electrical investigations showed that the nanospheres retained good physical and conductivity properties, compared to the commercial product. Moreover, the local studies indicated that the reprecipitation process and the spherical shape lead to a different arrangement of the PSS and PEDOT phases., M. S., A. A. and D. E. M.-T. acknowledge the Grants IT-1175-19 and IT-1566-22 from Eusko Jaurlaritza (Basque Government). D. E. M.-T. acknowledges the financial support obtained from the MCIU fellowship “Juan de la Cierva—Incorporación” (IJCI-2017-31600)., Peer reviewed