Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A new shape-conformable battery concept: The 3D printed injectable battery filled with semi-solid electrodes

  • Borlaf, Mario
  • Moreno, Rodrigo
  • Ventosa, Edgar
[EN] Shape-conformable batteries are of high interest for a variety of portable electronics. In this work, a new manufacturing concept for cost-effective shape-conformable batteries based on the combination of additive manufacturing (AM) technology and semi-solid electrodes (SSEs) is proposed. The manufacturing process consists in two steps. Firstly, the electrochemical cell is printed by stereolithography-based technique (SLA) and subsequently assembled. In a second step, flowable SSEs are injected into the cells by a double injection mechanism to introduce both SSEs in parallel. While syringe outlets, cell inlets and shape of the cell are found to play an important role in the injection process, formulation of the SSEs are observed to influence the rheological and electrochemical properties. For the proof of concept, a battery having the shape of the logo of our university is fabricated using Zn-based and MnO2-based SSEs achieving high utilization rate (>150 mAh ) and acceptable cycle stability (0.45% h−1) and thus showing the feasibility of the proposed shape-conformable injectable battery. The manufacturing process is finally extended to other battery chemistries leading to improved cycling stability and confirming the versatility of the manufacturing concept., The authors acknowledge the financial support by “Fundación la Caixa”, under agreement LCF/PR/PR18/51130007. The authors also acknowledge the financial support by the Spanish Ministry of Science and Innovation and NextGenerationEU (TED2021-131651B–C21) and Ramón y Cajal award (Ministry of Science and Innovation and European Social Funds, RYC2018-026086-I). This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU/PRTR., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Semi-solid electrodes based on injectable hydrogel electrolytes for shape-conformable batteries

  • Borlaf Pinar, Mario
  • Picchio, Matias L.
  • Luque, Gisela Carina
  • Criado-Gonzalez, Miryam
  • Guzmán-Gonzalez, Gregorio
  • Perez Antolin, Daniel
  • Lingua, Gabriele
  • Mecerreyes, David
  • Ventosa Arbaizar, Edgar
The development of new battery concepts, chemistries and fabrication processes is driven by the bloom of emerging applications in a variety of fields ranging from the Internet of Things to Smart Healthcare. Shape factor-free and shape-conformable power sources are highly desired for integration with complex-shape electronic devices. Herein, a new fabrication process for shape-conformable batteries is explored. Battery cells having targeted shapes are fabricated and assisted by 3D printing. Then, flowable semi-solid electrodes are used to fill in the prefabricated parts of the battery cell. The use of injectable hydrogel electrolytes enables semi-solid electrodes to possess special rheological properties as they are flowable during the fabrication process, while gelation of the electrolytes ensures their immobility during battery operation. Herein, poly(vinyl alcohol):gallic acid gels are investigated for aqueous Zn–LiFePO4 batteries. After evaluation of the effect of electrode formulation on the rheological properties as well as the ionic and electronic properties, simple-shape and UBU-shape batteries were fabricated using the best formulation. The prototype achieved areal capacities above 3 mA h cm−2, utilization rate between 150 and 180 mA h g−1 (LFP), and capacity fading of 0.2% h−1. While the prototype demonstrated the feasibility of the proposed fabrication process, improvements are still required. Shrinking of gel electrolytes and parasitic electrochemical reactions associated with the battery chemistry and the operation conditions are identified as the main challenges to be addressed for improving the performance., The authors acknowledge the financial support by the Spanish Ministry of Science and Innovation and NextGenerationEU (TED2021-131651B-C21 and TED2021-131651B-C22) and Ramón y Cajal award (Ministry of Science and Innovation and European Social Funds, RYC2018-026086-I). This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU/PRTR (C17. I1). The Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) support under the grant agreement No 823989 “IONBIKE” is also greatly acknowledged.