Pasar al contenido principal

SISTEMAS CATALITICOS ESTRUCTURADOS A PARTIR DE IMPRESIONES 3D PARA EL HIDROTRATAMIENTO DE ACEITES Y GRASAS NO COMESTIBLES

ENE2016-74889-C4-3-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transition Metal Phosphides for the Catalytic Hydrodeoxygenation of Waste Oils into Green Diesel

  • Álvarez Galván, María Consuelo
  • Campos Martín, José Miguel
  • García Fierro, José Luis
Recently, catalysts based on transition metal phosphides (TMPs) have attracted increasing interest for their use in hydrodeoxygenation (HDO) processes destined to synthesize biofuels (green or renewable diesel) from waste vegetable oils and fats (known as hydrotreated vegetable oils (HVO)), or from bio-oils. This fossil-free diesel product is produced completely from renewable raw materials with exceptional quality. These efficient HDO catalysts present electronic properties similar to noble metals, are cost-efficient, and are more stable and resistant to the presence of water than other classical catalytic formulations used for hydrotreatment reactions based on transition metal sulfides, but they do not require the continuous supply of a sulfide source. TMPs develop a bifunctional character (metallic and acidic) and present tunable catalytic properties related to the metal type, phosphorous-metal ratio, support nature, texture properties, and so on. Here, the recent progress in TMP-based catalysts for HDO of waste oils is reviewed. First, the use of TMPs in catalysis is addressed; then, the general aspects of green diesel (from bio-oils or from waste vegetable oils and fats) production by HDO of nonedible oil compounds are presented; and, finally, we attempt to describe the main advances in the development of catalysts based on TMPs for HDO, with an emphasis on the influence of the nature of active phases and effects of phosphorous, promoters, and preparation methods on reactivity., This research was funded by Agencia Estatal de Investigación (Spain) grant number ENE2016-74889-C4-3-R and the APC was funded by the same grant., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal phosphide catalysts for the hydrotreatment of non-edible vegetable oils

  • Álvarez Galván, María Consuelo
  • Blanco Brieva, Gema
  • Capel Sánchez, María del Carmen
  • Morales-delaRosa, Silvia
  • Campos Martín, José Miguel
  • García Fierro, José Luis
[EN] Silica-supported catalysts of nickel, cobalt, iron, molybdenum, and tungsten metal phosphides (NiP/SiO, CoP/SiO, FeP/SiO, MoP/SiO, and WP/SiO) with a metal-loading of 15 wt%, were synthesized by reduction of the corresponding phosphite precursors. The catalysts were characterized by N adsorption–desorption, X-ray diffraction (XRD), CO pulse chemisorption, NH temperature programmed desorption (NH-TPD), and X-ray photoelectron spectroscopy (XPS). The activity of these catalysts was measured at 573 K, a liquid flow of 0.3 mL min, a pressure of 2.0 MPa and a H/liquid ratio of 300 in a three-phase, trickle-bed reactor in the hydrotreatment of methyl laurate. The MoP/SiO catalyst was found to exhibit the best catalytic performance based on its higher active phase dispersion as measured by XRD, CO chemisorption and XPS analyses, along with its moderate acidity, which is higher with respect to the other studied catalysts. The reaction conditions using the MoP/SiO catalyst, the most active and selective to C and C hydrocarbons, were optimized. Optimal results can be obtained under the following conditions: 573 K, 2.0 MPa, and a liquid flow of 0.3 mL min. Moreover, long-run experiments showed that the MoP/SiO catalyst exhibits stable catalytic behavior for at least 96 h., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through projects: ENE2013-47826-C4-2-Rand ENE2016-74889-C4-3-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of bimetallic characteristics on the performance of MoCoP and MoFeP catalysts for methyl laurate hydrodeoxygenation

  • García-Pérez, Diana
  • Álvarez Galván, María Consuelo
  • Capel Sánchez, María del Carmen
  • Blanco Brieva, Gema
  • Morales-delaRosa, Silvia
  • Campos Martín, José Miguel
  • García Fierro, José Luis
To study the influence of bimetallic characteristics on activity and selectivity, SiO2-supported monometallic (CoP, FeP and MoP) and bimetallic (MoxCo1-xP and MoxFe1-xP (x = 0.5)) phosphides were investigated for the deoxygenation of methyl laurate to C11-C12 hydrocarbons. Here, we aimed to modulate the catalytic properties using different metal compositions with equimolar amounts of total metal phosphide. The catalysts were characterized by X-ray diffraction, N2 adsorption-desorption at -196 °C, transmission electron microscopy, CO chemisorption, NH3 temperature-programmed desorption and X-ray photoelectron spectroscopy; the conversion of methyl laurate, selectivity for hydrocarbons and C11/C12 ratio were related to the composition and physicochemical properties of the catalysts. The conversion (maximum of 85 % for MoP and minimum of 8 % for FeP) is mainly influenced by phosphide dispersion, which, in turn, is associated with acidity, and the same trend was found for both parameters (MoP/SiO2> MoCoP/SiO2 > MoFeP/SiO2 > FeP/SiO2 > CoP/SiO2). The yield of hydrocarbon formation follows the trend MoP/SiO2 > MoCoP/SiO2 > CoP/SiO2 > MoFeP/SiO2 > FeP/SiO2, with synergy between Mo and Co in the MoCoP catalyst. The C11/C12 ratio is influenced by the metal phosphide nature; the results indicate that Mo-based catalysts favor a hydrogenation (dehydration) pathway (C12 selectivity, 91 % in MoP/SiO2) and that Co-based catalysts favor oxygen elimination by decarbonylation/decarboxylation (C11 selectivity 75 % in CoP/SiO2). The activity results show synergy between Mo and Co in bimetallic phosphides by a kind of interaction that yields an enhancement in the catalytic activity of the MoCoP/SiO2 catalyst with respect to the sum of contributions from individual MoP/SiO2 and CoP/SiO2., The Agencia Estatal de Investigación (AEI) (Spain) supported this work through the project: ENE2016-74889-C4-3-R. DGP acknowledges her contract (BES-2017-079679) to AEI (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of W loading, support type, and preparation method on the performance of zirconia or alumina-supported Pt catalysts for n-dodecane hydroisomerization

  • García-Pérez, Diana
  • Blanco Brieva, Gema
  • Álvarez Galván, María Consuelo
  • Campos Martín, José Miguel
[EN] Catalysts based on zirconia and alumina-supported tungsten oxides (3–18 wt% W) with a small loading of platinum (0.3 wt% Pt) were selected to study the influence of W loading, support type, and preparation methods on the hydroisomerization of n-dodecane. The alumina- and zirconia-supported catalysts show different catalytic properties that play an important role in n-dodecane conversion. Specific surface area and acidity of the alumina-supported catalysts are clearly higher than those of zirconia-supported counterparts. The 15 wt% W loaded catalysts were found to exhibit the best catalytic performance for the hydroisomerization of n-dodecane for both zirconia and alumina (67% of n-C conversion and 87% of i-C selectivity) based catalysts. Catalysts prepared by a single-step wet impregnation method were more active in the hydroisomerization of n-dodecane than catalysts prepared via several consecutive steps., The Agencia Estatal de Investigación (AEI) (Spain) supported this work through the project ENE2016-74889-C4-3-R. DGP acknowledges her contract (BES-2017-079679) to AEI (Spain). We acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of nickel loading on the hydroisomerization of n-dodecane with nickel-tungsten oxide-alumina supported catalysts

  • García-Pérez, Diana
  • López-García, Andrés
  • Reñones, Patricia
  • Álvarez Galván, María Consuelo
  • Campos Martín, José Miguel
[EN] Heterogeneous catalysts based on alumina-supported tungsten oxides (15 wt% W) with different loadings of nickel (0.5, 1, 2, 4, 6, 8 and 10 wt% Ni) were selected to study the influence of Ni loading on the hydroisomerization of n-dodecane. The catalysts were prepared by applying the wetness impregnation method on the supports to introduce W and Ni. The characterization techniques applied for determining physicochemical properties of the catalysts were N adsorption-desorption at 77 K (textural properties), X-ray diffraction (structure and crystalline phases), H-TPR (redox properties), FTIR, NH-TPD (acid sites analyses) and XPS (chemical surface analysis). The catalytic properties of such catalysts were found to be crucial in the n-dodecane conversion. The NH-TPD profiles indicate that the medium acid sites are the main sites responsible for the reaction performance. The formation of bulky crystal structures of nickel species in the high nickel loading catalyst (10 wt% Ni) was confirmed by XRD and XPS results, resulting in the largest cracking activity. The conversion of n-dodecane and selectivity to i-C+branched C tend to increase with Ni loading until the catalyst contains 6 wt% Ni (28% n-C conversion and 94% of branched C selectivity). The lower selectivity at high nickel loading is due to metal-based cracking reaction. An optimum balance between metal and acid centers is needed to achieve a compromise between conversion and selectivity, avoiding or minimizing cracking reactions., The support of MICIN/AEI (Spain) through project ENE2016-74889-C4-3-R is acknowledged. DGP acknowledges MICIN/AEI for her contract (BES-2017-079679) (Spain). This research is part of the CSIC program for the Spanish Recovery, Transformation, and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by Regulation (EU) 2020/2094 (TRE2021-03-012). We acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic Properties of Efficient Catalysts Based on La-Doped Ceria-Supported Nickel Nanoparticles for rWGS Reaction. Influence of Ni Loading

  • Álvarez Galván, María Consuelo
  • Martínez, José L.
  • Capel Sánchez, María del Carmen
  • Pascual, Laura
  • Alonso, J. A.
[EN] The influence of Ni loading on CeLaO-supported Ni catalysts for CO reduction with hydrogen (reverse water gas shift reaction) is studied. The samples are prepared by solution combustion synthesis (SCS), leading to materials with high thermal resistance, purity, and crystallinity, consisting of metallic nickel nanoparticles supported on La-doped ceria. The study of the ferromagnetic Curie temperature (T) and magnetization cycles suggest that the Ni nanoparticles are superparamagnetic, exhibiting magnetic order at room temperature, with T strongly dependent on the particle size; this spans from 1.9, up to 80 nm. The structural study from synchrotron X-ray diffraction data and Raman spectroscopy clearly show the presence of oxygen vacancies in the fluorite crystal structure of the CeLaO matrix, which increase in the spent catalysts by forming a greater proportion of Ce compared with their fresh counterparts. This is confirmed from the Raman spectra, showing an increase in the relative intensity of the band placed between 520 and 610 cm. All the catalysts show very high reaction rate per unit mass of catalyst; the CO conversion after 6 h for the catalyst with 10% Ni molar (Ni/CeLa) is 57% (2.4 moles CO·h·g catalyst), very close to the thermodynamic equilibrium (59.3%)., Financial support given by the Spanish Ministry of Economy and Competitiveness (ENE2016-74889-C4-3-R). J.A.A. and J.L.M. acknowledge financial support given by the Spanish Ministry of Economy and Competitiveness (MAT2017-84496-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Obtención de biocombustibles por hidrotratamiento de lípidos no comestibles

  • García-Pérez, Diana
El objetivo principal de la tesis doctoral es el estudio del proceso de hidrotratamiento de residuos de biomasa como los aceites vegetales y/o grasas animales que no compiten con el consumo de alimentos, utilizando compuestos modelo para la producción de combustibles sostenibles de tipo diésel (diésel verde o renovable). La utilización de estos combustibles renovables está enfocada al sector aéreo y marítimo. El sector del transporte terrestre tiende cada vez más al uso de la energía eléctrica o al hidrógeno, sin embargo, la electrificación en el sector aéreo y marítimo es mucho más compleja debido a problemas de peso y densidad energética, por lo que su implantación a corto y medio plazo no es factible. Por eso, estos sectores seguirán usando biocombustibles como fuente de energía alternativa durante un periodo de tiempo considerable, lo cual justifica seguir estudiando estos procesos., Para su realización se ha contado con la financiación del antiguo Ministerio de Economía y Competitividad (MINECO) a través del proyecto ENE2016- 74889-C4-3-R que llevaba asociado la concesión de un contrato para la Formación de Personal Investigador (FPI) BES-2017-079679. Actualmente el ministerio competente es el Ministerio de Ciencia, Innovación y Universidades., (I) En el primer capítulo se contextualiza la situación energética y climática mundial, que dan sentido a esta investigación. También se incluye una revisión del estado del arte sobre los catalizadores utilizados en las reacciones de hidrodesoxigenación e hidroisomerización, que constituyen el proceso de hidrotratamiento y se explican los motivos del estudio de combustibles renovables a partir de grasas y aceites usados. (II) En el segundo capítulo se exponen los objetivos establecidos en este trabajo de investigación. (III) En el tercer capítulo se describen los materiales y procedimientos experimentales aplicados en la síntesis de los catalizadores, el fundamento teórico y el procedimiento experimental de las técnicas de caracterización fisicoquímica aplicadas, así como el procedimiento y reactor utilizados para llevar a cabo las medidas de la actividad catalítica de los catalizadores preparados. (IV - V) Los capítulos cuarto y quinto constituyen el bloque de los principales resultados experimentales obtenidos en esta tesis doctoral. En concreto el capítulo cuarto está compuesto por dos publicaciones referentes al proceso de hidrodesoxigenación estudiado (una ya publicada y otra enviada a una revista). El capítulo quinto está compuesto por tres publicaciones referentes al proceso de hidroisomerización estudiado. (VI) En el capítulo sexto se resumen las principales conclusiones extraídas de este trabajo de investigación. Finalmente, Finalmente, se incluyen dos anexos que incluyen: I) Acrónimos y II) Contribuciones a congresos derivados de la tesis doctoral. García-Pérez, D., Alvarez-Galvan, M. C., Capel-Sanchez, M. D. C., Blanco-Brieva, G., Morales-delaRosa, S., Campos-Martin, J. M., & Fierro, J. L. G. (2021). Influence of bimetallic characteristics on the performance of MoCoP and MoFeP catalysts for methyl laurate hydrodeoxygenation. Catalysis Today, 367, 43-50. http://hdl.handle.net/10261/232112 García-Pérez, D., Alvarez-Galvan, M. C., Campos-Martin, J. M., & Fierro, J. L. (2021). Influence of the reduction temperature and the nature of the support on the performance of zirconia and alumina-supported pt catalysts for n-dodecane hydroisomerization. Catalysts, 11(1), 88. http://hdl.handle.net/10261/227887, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Obtención de biocombustibles por hidrotratamiento de lípidos no comestibles

  • García-Pérez, Diana
El objetivo principal de la tesis doctoral es el estudio del proceso de hidrotratamiento de residuos de biomasa como los aceites vegetales y/o grasas animales que no compiten con el consumo de alimentos, utilizando compuestos modelo para la producción de combustibles sostenibles de tipo diésel (diésel verde o renovable). La utilización de estos combustibles renovables está enfocada al sector aéreo y marítimo. El sector del transporte terrestre tiende cada vez más al uso de la energía eléctrica o al hidrógeno, sin embargo, la electrificación en el sector aéreo y marítimo es mucho más compleja debido a problemas de peso y densidad energética, por lo que su implantación a corto y medio plazo no es factible. Por eso, estos sectores seguirán usando biocombustibles como fuente de energía alternativa durante un periodo de tiempo considerable, lo cual justifica seguir estudiando estos procesos., Para su realización se ha contado con la financiación del antiguo Ministerio de Economía y Competitividad (MINECO) a través del proyecto ENE2016- 74889-C4-3-R que llevaba asociado la concesión de un contrato para la Formación de Personal Investigador (FPI) BES-2017-079679. Actualmente el ministerio competente es el Ministerio de Ciencia, Innovación y Universidades., (I) En el primer capítulo se contextualiza la situación energética y climática mundial, que dan sentido a esta investigación. También se incluye una revisión del estado del arte sobre los catalizadores utilizados en las reacciones de hidrodesoxigenación e hidroisomerización, que constituyen el proceso de hidrotratamiento y se explican los motivos del estudio de combustibles renovables a partir de grasas y aceites usados. (II) En el segundo capítulo se exponen los objetivos establecidos en este trabajo de investigación. (III) En el tercer capítulo se describen los materiales y procedimientos experimentales aplicados en la síntesis de los catalizadores, el fundamento teórico y el procedimiento experimental de las técnicas de caracterización fisicoquímica aplicadas, así como el procedimiento y reactor utilizados para llevar a cabo las medidas de la actividad catalítica de los catalizadores preparados. (IV - V) Los capítulos cuarto y quinto constituyen el bloque de los principales resultados experimentales obtenidos en esta tesis doctoral. En concreto el capítulo cuarto está compuesto por dos publicaciones referentes al proceso de hidrodesoxigenación estudiado (una ya publicada y otra enviada a una revista). El capítulo quinto está compuesto por tres publicaciones referentes al proceso de hidroisomerización estudiado. (VI) En el capítulo sexto se resumen las principales conclusiones extraídas de este trabajo de investigación. Finalmente, Finalmente, se incluyen dos anexos que incluyen: I) Acrónimos y II) Contribuciones a congresos derivados de la tesis doctoral.