Pasar al contenido principal

HACIA MATERIALES CUANTICOS EMERGENTES EN INTERFASES DE OXIDOS COMPLEJOS

MAT2017-87134-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlation between Crystal Structure and Thermoelectric Properties of Sr1−xTi0.9Nb0.1O3−δ Ceramics

  • Prado-Gonjal, Jesús
  • López, C. A.
  • Pinacca, R. M.
  • Serrano-Sánchez, Federico
  • Nemes, N. M.
  • Dura, Oscar J.
  • Martínez, José L.
  • Fernández-Díaz, M. T.
  • Alonso, J. A.
© 2020 by the authors., Polycrystalline Sr1−xTi0.9Nb0.1O3−δ (x = 0, 0.1, 0.2) ceramics have been prepared by the solid state method and their structural and thermoelectric properties have been studied by neutron powder diffraction (NPD), thermal, and transport measurements. The structural analysis of Sr1-xTi0.9Nb0.1O3−δ (x = 0.1, 0.2) confirms the presence of a significant amount of oxygen vacancies, associated with the Sr-deficiency of the materials. The analysis of the anisotropic displacement parameters (ADPs) indicates a strong softening of the overall phonon modes for these samples, which is confirmed by the extremely low thermal conductivity value (κ ≈ 1.6 W m-1 K−1 at 823 K) found for Sr1−xTi0.9Nb0.1O3−δ (x = 0.1, 0.2). This approach of introducing A-site cation vacancies for decreasing the thermal conductivity seems more effective than the classical substitution of strontium by rare-earth elements in SrTiO3 and opens a new optimization scheme for the thermoelectric properties of oxides., This research was funded by the Spanish Ministry of Economy and Competitivity, grant numbers MAT2017-84496-R and MAT2017-87134-C2-2-R; the Community of Madrid and Complutense University of Madrid, grant number PR65/19-22459, ANPCyT; and UNSL, under grant numbers PICT2014-3576 and PROICO 2-2016., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructure stabilization by low-temperature dopant pinning in multiferroic BiFeO3-based thin films produced by aqueous chemical solution deposition

  • Gumiel, Carlos
  • Jardiel, Teresa
  • Calatayud, David G.
  • Vranken, Thomas
  • Van Bael, Marlies K.
  • Hardy, An
  • Calzada, M. L.
  • Jiménez, Ricardo
  • García-Hernández, Mar
  • Mompean, Federico J.
  • Caballero Cuesta, Amador
  • Peiteado, Marco
[EN] The metastability impediment which usually prevents the obtaining of a phase-pure BiFeO3 material can be dramatically stressed when taking the system to the thin film configuration. In order to preserve the stoichiometry, the films need to be processed at low temperatures and hence the solid-state diffusion processes which usually govern the microstructural evolution in bulk cannot be expected to also rule the development of the functional films. All these circumstances were presumed when exploring the possibilities of an aqueous solution–gel process plus spin-coating deposition method to reproduce, in thin film dimensions, the excellent multiferroic properties that have been previously observed with an optimized rare-earth and Ti4+-codoped BiFeO3 bulk composition. The experiments indicate high reliability for the tested methodology, allowing for the obtaining of homogeneous dense films at temperatures as low as 600 1C and with a tunable multiferroic response depending on the formulated rare-earth (Sm or Nd). Thorough structural characterization of the films reveals that despite the low temperature processing restrictions, effective microstructural control is achieved at the nanoscale, which is attributed to effective retention (pinning) of the dopants inside the perovskite structure of BiFeO3., his work was supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) under projects MAT2016-80182-R, MAT2017-87134-c2-2-R and partially by the project MAT2016-76851-R. It was also supported by the Research Foundation Flanders (FWO-Vlaanderen), project number G039414N. Dr T. Jardiel acknowledges the European Science Foundation (ESF) and the Ramon y Cajal Program of MICINN for the financial support. Work by Dr Calatayud was also supported by Fundación General CSIC (COMFUTURO Program). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Substantial thermal conductivity reduction in mischmetal skutterudites MmxCo4Sb12 prepared under high-pressure conditions, due to uneven distribution of the rare-earth elements

  • Gainza, Javier
  • Serrano-Sánchez, Federico
  • Prado-Gonjal, Jesús
  • Nemes, N. M.
  • Biskup, N.
  • Dura, Oscar J.
  • Martínez, José L.
  • Fauth, François
  • Alonso, J. A.
Thermoelectric mischmetal-filled MmxCo4Sb12 (Mm: natural cocktail of rare-earth elements, mostly Ce and La) skutterudites have been synthesized and sintered in one step under high-pressure conditions at 3.5 GPa in a piston–cylinder hydrostatic press. Synchrotron X-ray diffraction patterns display a splitting of the diffraction peaks ascribed to purely Ce-, and Mm-filled skutterudite phases, which have been analyzed and confirmed by high-resolution TEM and EELS. A total thermal conductivity (κ) of 1.51 W m−1 K−1 is measured at 773 K for Mm0.5Co4Sb12, below that of other filled skutterudites, which is promoted by the enhanced phonon scattering over a broad range of the phonon spectrum due to the inhomogeneous and nanoscale mischmetal inclusion. Compared to undoped CoSb3 skutterudite synthesized by conventional methods, κ is reduced by a factor of 3, while the power factor is also substantially enhanced., This work was supported by the Spanish Ministry of Science, Innovation and Universities through grants MAT2017-84496-R, MAT2017-87134-C2-2-R and MAT2015-66888-C3-3-R co financed by FEDER. JPG would also like to thank this Ministry for granting a “Juan de la Cierva” fellowship and to Community of Madrid for granting an “Atracción de Talento” fellowship (2017-T2/I ND-5597). Financial support from the ERC grant PoC2015-MAGTOOLS is also acknowledged. The authors wish to express their gratitude to ALBA technical staff for making the facilities available for the synchrotron X-ray diffraction experiment number 2017072260. Transmission electron microscopy studies were performed at the ICTS ELECMI node at Centro Nacional de Microscopía Electrónica (CNME) at the Universidad Complutense de Madrid (UCM)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical-Based Thickness Measurement of MoO3 Nanosheets

  • Puebla, Sergio
  • Mariscal, A.
  • Serna, Rosalía
  • Munuera, C.
  • Castellanos-Gómez, Andrés
10 pags., 5 figs. -- This article belongs to the Special Issue 2D Materials and Heterostructures with Application in Optoelectronics, Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO3 flakes on SiO2/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy images, one can make a first approximation of the thickness with an uncertainty of 3 nm. The second method is based on the fit of optical contrast spectra, acquired with micro-reflectance measurements, to a Fresnel law-based model that provides an accurate measurement of the flake thickness with +-2 nm of uncertainty., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n◦ 755655, ERC-StG 2017 project 2D-TOPSENSE), the European Commission, under the Graphene Flagship (Core 3, grant number 881603), the Spanish Ministry of Economy, Industry and Competitiveness through the grant MAT2017-87134-C2-2-R and partially funded by the Spanish Ministerio de Ciencia e Innovación through grant RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE). SP acknowledges the fellowship PRE2018-084818.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dimensionality-driven metal–insulator transition in spin–orbit-coupled IrO2

  • Arias-Egido, Eduardo
  • Laguna-Marco, M. A.
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Morellón, Luis
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Haskel, D.
  • Boada, Roberto
  • Díaz-Moreno, Sofía
This article is part of the themed collection: Recent Open Access Articles, A metal–insulator transition is observed in spin–orbit-coupled IrO2 thin films upon reduction of the film thickness. In the epitaxially grown samples, the critical thickness (t ∼ 1.5–2.2 nm) is found to depend on growth orientation (001), (100) or (110). Interestingly from the applied point of view, the insulating behavior is found even in polycrystalline ultrathin films. By analyzing the experimental electrical response with various theoretical models, we find good fits to the Efros–Shklovskii-VRH and the Arrhenius-type behaviors, which suggests an important role of electron correlations in determining the electrical properties of IrO2. Our magnetic measurements also point to a significant role of magnetic order. Altogether, our results would point to a mixed Slater- and Mott-type of insulator., This work was partially supported by the Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER, UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE), the Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033 and by the Aragon Regional Government (Projects No. E12-20R and E28-20R). E. A-E acknowledges the Spanish MINECO and the European Social Fund for an FPI (Formación de Personal Investigador, 2015) grant. R. B. acknowledges funding support from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 665919. This research used resources of the APS, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. We acknowledge Diamond Light Source for time on I20-Scanning under Proposal SP-17266. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation Horizon 2020. The authors acknowledge funding from the project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473) implemented within the European Union's Horizon 2020 Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superconducting density of states and band structure at the surface of the candidate topological superconductor Au2Pb

  • Martín-Vega, Francisco
  • Herrera, Edwin
  • Wu, Beilun
  • Barrena, Víctor
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Canfield, Paul C.
  • Black-Schaffer, Annica M.
  • Baldoví, José J.
  • Guillamón, Isabel
  • Suderow, Hermann
[EN] The electronic band structure of Au2Pb has a Dirac cone which gaps when undergoing a structural transition into a low temperature superconducting phase. This suggests that the superconducting phase (Tc = 1.1 K) might hold topological properties at the surface. Here we make Scanning Tunneling Microscopy experiments on the surface of superconducting Au2Pb. We measure the superconducting gap and find a sizable superconducting density of states at the Fermi level. We discuss possible origins for this finding in terms of superconductivity induced into surface states., This work was supported by the Spanish Research State Agency (Grants No. PID2020-114071RB-I00, No. FIS2017-84330-R, No. CEX2018-000805-M, No. RYC-2014-15093, and No. MAT2017-87134-C2-2-R), by the Comunidad de Madrid through program NANOFRONTMAG-CM (Grant No. S2013/MIT-2850), by the European Research Council PNICTEYES Grant Agreement No. 679080 and by the Swedish Research Council (Vetenskapsrådet Grant No. 2018-03488). F.M. and M.G.H. acknowledge European Union’s Horizon 2020 research and innovation program Grant Agreement No. 881603 Graphene Core3-Graphene-based disruptive technologies, EU FLAG-ERA through the project To2Dox, JTC-2019-009 and the Comunidad de Madrid through the project CAIRO-CM project, Y2020/NMT-6661.We acknowledge collaborations through EU program Cost CA16218 (Nanocohybri). J.J.B. acknowledges the Marie Curie Fellowship program (H2020 MSCA-IF2016-751047) and the Generalitat Valenciana (CDEIGENT/2019/022). Ames Laboratory is operated for the U.S. Department of Energy by Iowa State University under Contract No. DE-AC02-07CH11358. We acknowledge SEGAINVEX at UAM for design and construction of cryogenic equipment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data for Dimensionality-driven metal-insulator transition in spin-orbit-coupled IrO2

  • Laguna-Marco, M. A.
  • Arias-Egido, Eduardo
  • Piquer, Cristina
  • Jiménez-Cavero, Pilar
  • Lucas, Irene
  • Gallego, Fernando
  • Rivera-Calzada, Alberto
  • Cabero-Piris, Mariona
  • Santamaría, Jacobo
  • Fabbris, Gilberto
  • Boada, Roberto
  • Proyecto: PID2020-115159GB-I00
All the experiments have been carried out on thin films of IrO2, the thickness and crystallinity of the each film being specified in each file. X-ray reflectivity (XRR) and X-ray diffraction measurements (XRD) were performed by using Bruker D8 and Rigaku D/max-2500 diffractometers, respectively, by using the Ka radiation line of copper. The electrical resistivity was measured using the four points van der Pauw method by means of a Quantum Design PPMS-9T with no applied magnetic field and with a small electric current (0.1 mA). Magnetization measurements were carried out by using a commercial SQUID magnetometer from Quantum Design. Magnetization versus temperature data were collected from 5 to 350 K with a heating rate of 5 K/min at 1000 Oe. High-energy resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XANES) measurements were carried out at RT by using a beamline I20-Scanning at Diamond Light Source. More informacion can be found in https://doi.org/10.1107/S1600577518008974. X-ray magnetic circular dichroism (XMCD) measurements were carried out at beamline 4-ID-D of the Advanced Photon Source, Argonne National Laboratory. Measurements were done in a cryomagnet with the sample cooled with 4He vapor. A 500 micron thick diamond phase plate was used to generate circularly polarized X-rays and XMCD measurements were carried out in helicity-switching mode. Measurements were done in fluorescence mode using a grazing incidence geometry and an energy dispersive 4-element Si drift diode detector placed at 90 degrees relative to the incident beam direction. XMCD Data were collected at 10 K with the magnetic fields along and opposite the X-ray propagation direction to remove any artifacts of nonmagnetic origin., Spanish MINECO projects MAT2014-54425-R (MINECO/FEDER, UE), MAT2017-82970-C2-R (AEI/FEDER, UE), MAT2017-83468-R (AEI/FEDER,UE), MAT2017-87134-C02-01-R (AEI/FEDER, UE) and MAT2017-87134-C02-02-R (AEI/FEDER, UE); Spanish MICINN project PID2020-115159GB-I00 / AEI / 10.13039/501100011033; Aragon Regional Government (Projects No. E12-20R and E28-20R); European Union’s Horizon 2020 program Marie Sklodowska-Curie grant agreement no. 665919; European Union’s Horizon 2020 Programme project Quantox of QuantERA ERA-NET Cofund of Quantum Technologies (Grant Agreement No. 731473)., XRD_IrO2_001epitaxy.dat XRD_IrO2_100epitaxy.dat XRD_IrO2_110epitaxy.dat XRD_IrO2_110textured.dat AFM_2d2nm_thick_001epitaxy.tif STEM_5d7_nm_thick_001epitaxy.tif XAS_IrO2_001epitaxy_5d7nm.dat XAS_IrO2_001epitaxy_96nm.dat XAS_IrO2_100epitaxy_1d7nm.dat XAS_IrO2_100epitaxy_5d1nm.dat XAS_IrO2_100epitaxy_89nm.dat XAS_IrO2_110epitaxy_5d3nm.dat XAS_IrO2_110epitaxy_92d2nm.dat XAS_IrO2_polycrystalline_films resistivity_IrO2_ 001epitaxy.dat resistivity_IrO2_ 100epitaxy.dat resistivity_IrO2_ 110epitaxy.dat resistivity_IrO2_ 110texture.dat MvsT_IrO2_001epitaxy_1d5nmthick.dat MvsT_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_IrO2_100epitaxy_1d5nmthick.dat XAS_XMCD_powderIrO2.dat XRR_IrO2_5nmthick.dat XRR_IrO2_100nmthick.dat XAS_polycrystalline_vs_amorphous.dat rockingcurves_IrO2.dat RSM_IrO2_001epitaxy_5d7nm.dat RSM_IrO2_001epitaxy_96nm.dat RSM_IrO2_100epitaxy_5d1nm.dat RSM_IrO2_100epitaxy_89nm.dat, Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Substantial thermal conductivity reduction in mischmetal skutterudites Mm_xCo_4Sb_12 prepared under high-pressure conditions, due to uneven distribution of the rare-earth elements

  • Gainza, Javier
  • Serrano Sánchez, F.
  • Prado Gonjal, Jesús de la Paz
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Dura, O.J.
  • Martínez, J.L.
  • Fauth, F.
  • Alonso, J.A.
Thermoelectric mischmetal-filled Mm(x)Co(4)Sb(12) (Mm: natural cocktail of rare-earth elements, mostly Ce and La) skutterudites have been synthesized and sintered in one step under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. Synchrotron X-ray diffraction patterns display a splitting of the diffraction peaks ascribed to purely Ce-, and Mm-filled skutterudite phases, which have been analyzed and confirmed by high-resolution TEM and EELS. A total thermal conductivity () of 1.51 W m(-1) K-1 is measured at 773 K for Mm(0.5)Co(4)Sb(12), below that of other filled skutterudites, which is promoted by the enhanced phonon scattering over a broad range of the phonon spectrum due to the inhomogeneous and nanoscale mischmetal inclusion. Compared to undoped CoSb3 skutterudite synthesized by conventional methods, is reduced by a factor of 3, while the power factor is also substantially enhanced.