Pasar al contenido principal

Optoelectronica en materiales bidimensionales

FJCI-2017-32919

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct transformation of crystalline MoO3 into few-layers MoS2

  • Carrascoso Plana, Félix
  • Sanchez-Santolino, Gabriel
  • Hsu, Chun-wei
  • Nemes, N. M.
  • Torres-Pardo, Almudena
  • Gant, Patricia
  • Mompean, Federico J.
  • Kalantar-Zadeh, Kourosh
  • Alonso, J. A.
  • García-Hernández, Mar
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
We fabricated large-area atomically thin MoS2 layers through the direct transformation of crystalline molybdenum trioxide (MoO3) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10–20 nm single-crystal domain size) with areas of up to 300 × 300 µm2, 2–4 layers in thickness and show a marked p-type behavior. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements., ACG acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n° 755655, ERC-StG 2017 project 2D-TOPSENSE) and from the EU Graphene Flagship funding (Grant Graphene Core 2, 785219). JAA thanks the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) for funding the project MAT2017-84496-R. RF acknowledges support from MINECO through a “Juan de la Cierva: formación” fellowship (2017 FJCI-2017-32919). GSS acknowledges financial support from MINECO (Juan de la Cierva 2015 program, FJCI-2015-25427)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic buckling of few-layer black phosphorus

  • Vaquero-Garzón, Luis
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
When a two-dimensional material, adhered onto a compliant substrate, is subjected to compression it can undergo a buckling instability yielding to a periodic rippling. Interestingly, when black phosphorus (bP) flakes are compressed along the zig-zag crystal direction, the flake buckles forming ripples with a 40% longer period than that obtained when the compression is applied along the armchair direction. This anisotropic buckling stems from the puckered honeycomb crystal structure of bP and a quantitative analysis of the ripple period allows the determination of the Youngs's modulus of few-layer bP along the armchair direction (E = 35.1 ± 6.3 GPa) and the zig-zag direction (E = 93.3 ± 21.8 GPa)., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement no.755655, ERC-StG 2017 project 2D-TOPSENSE). RF acknowledges support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva Formación fellowship (2017 FJCI-2017-32919). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of traps in the photocurrent generation mechanism in thin InSe photodetectors

  • Zhao, Qinghua
  • Wang, Wei
  • Carrascoso Plana, Félix
  • Jie, Wanqi
  • Wang, Tao
  • Castellanos-Gómez, Andrés
  • Frisenda, Riccardo
Due to the excellent electrical transport properties and optoelectronic performance, thin indium selenide (InSe) has recently attracted attention in the field of 2D semiconducting materials. However, the mechanism behind the photocurrent generation in thin InSe photodetectors remains elusive. Here, we present a set of experiments aimed at explaining the strong scattering in the photoresponsivity values reported in the literature for thin InSe photodetectors. By performing optoelectronic measurements on thin InSe-based photodetectors operated under different environmental conditions we find that the photoresponsivity, the response time and the photocurrent power dependency are strongly correlated in this material. This observation indicates that the photogating effect plays an imporant role in thin InSe flakes, and it is the dominant mechanism in the ultra-high photoresponsivity of pristine InSe devices. In addition, when exposing the pristine InSe photodetectors to the ambient environment we observe a fast and irreversible change in the photoresponse, with a decrease in the photoresponsivity accompanied by an increase of the operating speed. We attribute this photodetector performance change (upon atmospheric exposure) to the decrease in the density of the traps present in InSe, due to the passivation of selenium vacancies by atmospheric oxygen species. This passivation is accompanied by a downward shift of the InSe Fermi level and by a decrease of the Fermi level pinning, which leads to an increase of the Schottky barrier between Au and InSe. Our study reveals the important role of traps induced by defects in tailoring the properties of devices based on 2D materials and offers a controllable route to design and functionalize thin InSe photodetectors to realize devices with either ultrahigh photoresposivity or fast operation speed., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no 755655, ERC-StG 2017 project 2D-TOPSENSE). EU Graphene Flagship funding (Grant Graphene Core 2, 785219) is acknowledged. RF acknowledges support from the Netherlands Organization for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515 and from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship (2017 FJCI-2017-32919). QHZ acknowledges the grant from China Scholarship Council (CSC) under No. 201700290035. TW acknowledges support from the National Natural Science Foundation of China: 51672216, We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superlattices based on van der Waals 2D materials

  • Kyoung Ryu, Yu
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
Two-dimensional (2D) materials exhibit a number of improved mechanical, optical, and electronic properties compared to their bulk counterparts. The absence of dangling bonds in the cleaved surfaces of these materials allows combining different 2D materials into van der Waals heterostructures to fabricate p-n junctions, photodetectors, and 2D-2D ohmic contacts that show unexpected performances. These intriguing results are regularly summarized in comprehensive reviews. A strategy to tailor their properties even further and to observe novel quantum phenomena consists in the fabrication of superlattices whose unit cell is formed either by two dissimilar 2D materials or by a 2D material subjected to a periodic perturbation, each component contributing with different characteristics. Furthermore, in a 2D material-based superlattice, the interlayer interaction between the layers mediated by van der Waals forces constitutes a key parameter to tune the global properties of the superlattice. The above-mentioned factors reflect the potential to devise countless combinations of van der Waals 2D material-based superlattices. In the present feature article, we explain in detail the state-of-the-art of 2D material-based superlattices and describe the different methods to fabricate them, classified as vertical stacking, intercalation with atoms or molecules, moiré patterning, strain engineering and lithographic design. We also aim to highlight some of the specific applications of each type of superlattices., This project has received funding from the European Research Council (ERC) under European Union's Horizon 2020 research and innovation programme (grant agreement no 755655, ERC-StG 2017 project 2D-TOPSENSE). R. F. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship 2017 FJCI-2017-32919. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

InSe: A two-dimensional semiconductor with superior flexibility

  • Zhao, Qinghua
  • Frisenda, Riccardo
  • Wang, Tao
  • Castellanos-Gómez, Andrés
Two-dimensional indium selenide (InSe) has attracted extensive attention recently due to its record-high charge carrier mobility and photoresponsivity in the fields of electronics and optoelectronics. Nevertheless, the mechanical properties of this material in the ultra-thin regime have not been investigated yet. Here, we present our efforts to determine the Young's modulus of thin InSe (∼1-2 layers to ∼34 layers) flakes experimentally by using a buckling-based methodology. We find that the Young's modulus has a value of 23.1 ± 5.2 GPa, one of the lowest values reported to date for crystalline two-dimensional materials. This superior flexibility can be very attractive for different applications, such as strain engineering and flexible electronics., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE). EU Graphene Flagship funding (Grant Graphene Core 2, 785219) is acknowledged. RF acknowledges support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship (2017 FJCI-2017-32919). QHZ acknowledges the grant from the China Scholarship Council (CSC) under no. 201700290035. TW acknowledges support from the National Natural Science Foundation of China: 51672216., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-broad spectral photo-response in FePS3 air-stable devices

  • Ramos, María
  • Carrascoso Plana, Félix
  • Frisenda, Riccardo
  • Gant, Patricia
  • Mañas Valero, Samuel
  • Esteras, Dorye L.
  • Baldoví, José J.
  • Coronado, Eugenio
  • Castellanos-Gómez, Andrés
  • Calvo, M. Reyes
Van der Waals materials with narrow energy gaps and efficient response over a broadband optical spectral range are key to widen the energy window of nanoscale optoelectronic devices. Here, we characterize FePS as an appealing narrow-gap p-type semiconductor with an efficient broadband photo-response, a high refractive index, and a remarkable resilience against air and light exposure. To enable fast prototyping, we provide a straightforward guideline to determine the thickness of few-layered FePS nanosheets extracted from the optical transmission characteristics of several flakes. The analysis of the electrical photo-response of FePS devices as a function of the excitation energy confirms a narrow gap suitable for near IR detection (1.23 eV) and, more interestingly, reveals a broad spectral responsivity up to the ultraviolet region. The experimental estimate for the gap energy is corroborated by ab-initio calculations. An analysis of photocurrent as a function of gate voltage and incident power reveals a photo-response dominated by photogating effects. Finally, aging studies of FePS nanosheets under ambient conditions show a limited reactivity of the outermost layers of flakes in long exposures to air., The present work has received funding from the European Union’s Horizon 2020 research and innovation program through the European Research Council grants ERC-2017-StG-755655 2D-TOPSENSE, ERC-2018-AdG-788222 MOL-2D, under the Graphene Flagship through projects GrapheneCore2 (grant nr. 785219), and GrapheneCore3 (grant nr. 881603) and through the COST Action CA15128 MOLSPIN. The authors also acknowledge funding from the Spanish Government through the Unit of Excellence “María de Maeztu” MDM-2015-0538, through projects MAT2017- 88377-C2-2-R (AEI/FEDER), MAT2017-88377, MAT2017-89528 (AEI/FEDER), and R.F.’sJuan de la Cierva-formación fellowship FJCI-2017-32919. This work has been supported by the Generalitat Valenciana, through grants CIDEGENT/2018/004, CIDEGENT/2018/005, CDEIGENT/2019/022, the Prometeo Program of Excellence, and M.R.’s APOSTD/2020/249 fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalable and low-cost fabrication of flexible WS2 photodetectors on polycarbonate

  • Quereda, Jorge
  • Kuriakose, Sruthi
  • Munuera, C.
  • Mompean, Federico J.
  • Al-Enizi, Abdullah M.
  • Nafady, Ayman
  • Diez, Enrique
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
We present a low-cost and easy-to-implement technique to fabricate large-area WS photodetector devices onto transparent and flexible polycarbonate substrates. The method relies on the deposition of large-area (in the cm scale) thin films (~30 nm thick) of WS by a recently introduced abrasion-induced method. Interdigitated electrical contacts are then deposited by thermal evaporation through a shadow mask. The photodetectors present well-balanced performances with an good trade-off between responsivity (up to 144 mA/W at a source-drain voltage of 10 V and illumination power of 1 μW) and response time (down to ~70 µs) and a detectivity value of 10 Jones. We found that the devices perform very reversibly upon several illumination and straining cycles and we found a moderate device-to-device variation., This work received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE), the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. A.C.-G., A.M.A.-E., and A.N. extend their sincere appreciation to the Distinguished Scientist Fellowship Program (DSFP) at King Saud University for funding of this work. R.F. acknowledges the support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Juan de la Cierva-formación fellowship 2017 FJCI-2017-32919. J.Q. and E.D. acknowledge financial support from the Agencia Estatal de Investigación of Spain (Grants PID2019-106820RB, RTI2018-097180-B-100, and PGC2018-097018-BI00) and the Junta de Castilla y León (Grants SA256P18 and SA121P20), including funding by ERDF/FEDER. J.Q. acknowledges financial support from Universidad Complutense de Madrid and European Commision (MSCA COFUND UNA4CAREER grant. Project number 4129252) and from MICINN (Spain) through the program Juan de la Cierva-Incorporación.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biaxial versus uniaxial strain tuning of single-layer MoS2

  • Carrascoso Plana, Félix
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
Strain engineering has arisen as a powerful technique to tune the electronic and optical properties of two-dimensional semiconductors like molybdenum disulfide (MoS2). Although several theoretical works predicted that biaxial strain would be more effective than uniaxial strain to tune the band structure of MoS2, a direct experimental verification is still missing in the literature. Here we implemented a simple experimental setup that allows to apply biaxial strain through the bending of a cruciform polymer substrate. We used the setup to study the effect of biaxial strain on the differential reflectance spectra of 12 single-layer MoS2 flakes finding a redshift of the excitonic features at a rate between −40 meV/% and −110 meV/% of biaxial tension. We also directly compare the effect of biaxial and uniaxial strain on the same single-layer MoS2 finding that the biaxial strain gauge factor is 2.3 times larger than the uniaxial strain one. © 2021 Chongqing University, This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n 755655, ERC-StG 2017 project 2D-TOPSENSE). R.F. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship 2017 FJCI2017-32919., Supplementary data to this article can be found online at https ://doi.org/10.1016/j.nanoms.2021.03.001, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of traps in the photocurrent generation mechanism in thin InSe photodetectors

  • Zhao, Qinghua
  • Wang, Wei
  • Carrascoso Plana, Félix
  • Jie, Wanqi
  • Wang, Tao
  • Castellanos-Gómez, Andrés
  • Frisenda, Riccardo
Due to the excellent electrical transport properties and optoelectronic performance, thin indium selenide (InSe) has recently attracted attention in the field of 2D semiconducting materials. However, the mechanism behind the photocurrent generation in thin InSe photodetectors remains elusive. Here, we present a set of experiments aimed at explaining the strong scattering in the photoresponsivity values reported in the literature for thin InSe photodetectors. By performing optoelectronic measurements on thin InSe-based photodetectors operated under different environmental conditions we find that the photoresponsivity, the response time and the photocurrent power dependency are strongly correlated in this material. This observation indicates that the photogating effect plays an imporant role in thin InSe flakes, and it is the dominant mechanism in the ultra-high photoresponsivity of pristine InSe devices. In addition, when exposing the pristine InSe photodetectors to the ambient environment we observe a fast and irreversible change in the photoresponse, with a decrease in the photoresponsivity accompanied by an increase of the operating speed. We attribute this photodetector performance change (upon atmospheric exposure) to the decrease in the density of the traps present in InSe, due to the passivation of selenium vacancies by atmospheric oxygen species. This passivation is accompanied by a downward shift of the InSe Fermi level and by a decrease of the Fermi level pinning, which leads to an increase of the Schottky barrier between Au and InSe. Our study reveals the important role of traps induced by defects in tailoring the properties of devices based on 2D materials and offers a controllable route to design and functionalize thin InSe photodetectors to realize devices with either ultrahigh photoresposivity or fast operation speed. © 2019 The Royal Society of Chemistry., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no 755655, ERC-StG 2017 project 2D-TOPSENSE). EU Graphene Flagship funding (Grant Graphene Core 2, 785219) is acknowledged. RF acknowledges support from the Netherlands Organization for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515 and from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formacio´n fellowship (2017 FJCI-2017-32919). QHZ acknowledges the grant from China Scholarship Council (CSC) under No. 201700290035. TW acknowledges support from the National Natural Science Foundation of China: 51672216., Supplementary material, Peer reviewed