Pasar al contenido principal

INGENIERIA DE NANOPARTICULAS EN CELULAS MEDIANTE PROCESOS EN FLUJO: UN ENFOQUE CIRCULAR PARA LA CATALISIS BIOROTOGONAL Y APLICACIONES TERAPEUTICAS

PID2024-160339OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An à la carte synthesis approach for chemically linking Au, Pt, and Pd nanoparticles to few-layer 2H-MoS2

  • Quirós‐Ovies, Ramiro
  • Bonet-Aleta, Javier
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
The data that support the findings of this study are available on request from the corresponding author. The data are not publicly available due to privacy or ethical restrictions., The combination of 2D materials and metallic nanoparticles (NPs) enables the creation of hybrid systems with enhanced properties, such as improved light absorption via plasmon resonance or the introduction of active catalytic sites. However, effectively interfacing 2D materials with NPs remains challenging. This work presents a novel and efficient à la carte synthesis approach that enables the tailored chemical linkage of noble metal NPs—gold (Au), platinum (Pt), and palladium (Pd)— to ultrathin 2H-MoS2 sheets using orthogonal maleimide-based linkers. Specifically, alkyne-, carboxylic acid-, and phenyl bromide-terminated maleimides are employed to anchor Au, Pt, and Pd NPs, respectively. This modular strategy allows precise control over the surface chemistry, leading to uniform decoration with sub-2 nm NPs and robust attachment to the MoS2 substrate. This chemical linkage is expected to enhance the interaction between the MoS2 and the NPs while also improving the mechanical stability of the hybrid material. These combined effects make the system particularly promising for applications requiring both strong interfacial coupling and durability, such as electrocatalysis, sensing, and flexible electronic devices., V.S. acknowledge funding from project PID2024-160339OB-I00, PID2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish Ministry of Science and Innovation (CEX2020-001039-S). INMA, CSIC-Universidad de Zaragoza, researchers acknowledge sup-port from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033). Authors acknowledge Sergio Aina the XPS analysis. Authors also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) ‘Una manera de hacer Europa’, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A rationally designed polypeptide-based hybrid platform for targeted intranasal brain drug delivery

  • Conejos-Sánchez, Inmaculada
  • Sebastián, Víctor
  • Vicent, María J.
I. Conejos-Sánchez et al., Data will be made available on request., Intranasal administration represents a safe and non-invasive route for drug delivery to the brain; however, clinical translation remains limited due to anatomical and physiological barriers. We present a modular hybrid biomaterial platform (NanoInBrain) that bypasses the blood-brain barrier via the olfactory route and enables central nervous system (CNS) drug delivery. The platform integrates a rationally designed polypeptide-based nanocarrier with a depot-forming hydrogel vehicle - a hyaluronic acid-poly-L-glutamate crosspolymer (HA-CP, Yalic®) - adapted from dermatological applications to enhance nasal mucosal retention and brain uptake. We engineered the nanocarrier system using star-shaped poly-L-glutamate (StPGA) architectures and systematically tuned physicochemical properties to optimize mucosal interaction and CNS diffusion. We introduced mucoadhesive and mucodiffusive functionalities via C-terminal odorranalectin (OL) conjugation, which improved nasal epithelium permeation through receptor-mediated mechanisms. Redox-responsive disulfide crosslinking (StPGA-CL-SS) further enhanced mucosal transport by enabling thiol-mediated anchoring to mucin glycoproteins, outperforming inert click-crosslinked variants. Ex vivo Franz diffusion studies and a nasal-mucosa-on-chip model demonstrated robust permeation, with in vivo imaging confirming brain distribution and intracellular uptake in neurons and microglia. Incorporation of HA-CP prolonged nasal residence (∼4 h) and increased total brain accumulation while being well-tolerated. This new platform combines architectural tunability, bioresponsive surface chemistry, and depot-mediated delivery in a scalable, biocompatible nose-to-brain delivery system with potential for treating neurological disorders., This work was supported by the European Research Council (grant ERC-CoG-2014-648831 ″MyNano” and ERC-PoC- 2022-POC1 ″POLYBRAINT”) to M.J.V.); Health Foundation La Caixa Research Project NanoGBA (HR22-00602) and Caixa Impulse NanoERT (CI24-20222); the Spanish Ministry of Science, Innovation, and Universities (SAF2016-80427-R, PID2019-108806RB-I00 to M.J.V.; RTC-2017-6465-1, C.F-L Grant PTQ2018-010251 and D.M − B, Grant Industrial PhD DI-14-06926); the MINECO/FEDER, UE; European Regional Development Fund (ERDF) included in the ERDF operational program of Comunidad Valenciana 2014-2020; the Valencian Council for Education, Culture, University and Employment (CIPROM/2023/053) to J.M.G-V and V.H-P; the Valencian Innovation Agency (AVI) (L.T-C INNTAL31/19/005) and the Generalitat Valenciana (I.D-P, Grant VALi+d ACIF-2016-021 and BEFPI/2018/055). I.C-S. is funded by AEEC Junior Grant (Ref INVES211323CONE), and L.I.T.-S. has a predoctoral contract by the Valencian Council for Education, Universities and Employment (ACIF2021/420). VS acknowledges funding from project PID2024-160339OB-I00, PID2021-127847OB-I00, ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unlocking the potential of bacterial membrane vesicles: Advances in isolation techniques and biomedical applications

  • Canalejo-Marco, Gonzalo
  • Arruebo, Manuel
  • Sebastián, Víctor
Bacterial membrane vesicles (MVs) are nanosized, lipid bilayer-enclosed structures released by both Gram-positive (commonly referred as MVS, bacterial membrane vesicles) and Gram-negative bacteria (commonly referred as OMVs, outer membrane vesicles and outer-inner membrane vesicles (OIMVs)). They carry proteins, lipids, nucleic acids, and metabolites, playing key roles in intercellular communication, host–pathogen interactions, and immune modulation. Owing to these properties, MVs are attracting growing interest as versatile tools for vaccine development, drug delivery, and diagnostic applications. However, their translation remains constrained by low production yields, potential toxicity, and the lack of standardized isolation and characterization methods. This review summarizes current knowledge on MV composition and biogenesis, with a particular focus on emerging strategies for their isolation and engineering, and highlights their biomedical potential while outlining the challenges that must be overcome to enable future clinical applications., Authors acknowledge the funding from “Beca Leonardo a Investigadores y Creadores culturales 2021 de la Fundación BBVA” and from the Spanish Ministry of Science and Innovation and Universities (grant numbers PID2021–127847OB-I00, PID2023–146091OB-I00 and PID2024–160339OB-I00). Researchers acknowledge support from the 'Severo Ochoa' Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023–001286-S MICIU/AEI /10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchically porous carbons from almond residues via hydrothermal pretreatment and mild K2CO3 activation for aqueous zinc hybrid supercapacitors

  • Shaj, Densa A.
  • Alvira, Darío
  • Antorán, Daniel
  • Sebastián, Víctor
  • Manyà, Joan J.
Agricultural residues offer a scalable feedstock for sustainable carbon electrodes, yet achieving high electrochemical performance in aqueous zinc-ion hybrid supercapacitors (ZHSCs) often relies on harsh activating agents and low carbon yields. Here, almond-tree pruning residues (AT) and almond shells (AS) are converted into porous carbons via hydrothermal pretreatment (HTC) followed by mild K2CO3 activation, enabling hierarchical porosity while limiting excessive burnoff. The HTC-assisted route markedly enhances N2-accessible surface area and mesopore volume, improving electrolyte accessibility and ion-transport pathways, while the presence of oxygen-containing groups contributes to favorable interfacial interactions in aqueous media. AT-derived carbons consistently outperform AS counterparts, highlighting the strong influence of precursor architecture on activation efficiency and pore connectivity. In a two-electrode aqueous ZHSC configuration (Zn metal anode; porous carbon cathode), the best performing AT-derived electrode delivered a specific capacity of 142 mAh g-1 at 0.1 A g-1 with 91% capacity retention after 10,000 cycles at 10 A g-1. Electrolyte chemistry plays a key role in durability: zinc trifluoromethanesulfonate (ZTFS) provides higher capacity retention and improved reversibility than ZnSO4, consistent with a more uniform Zn deposition and the formation of a less crystalline, fluorine-containing interphase, as evidenced by post-mortem analyses. Electrochemical impedance spectroscopy and galvanostatic intermittent titration techniques further support faster interfacial kinetics and more favorable transport in the best-performing carbon, in line with its balanced hierarchical porosity and surface chemistry. The device achieves an energy density of 87.8 Wh kg-1 at 62.3 W kg-1 and retains 37.9 Wh kg-1 at 13.6 kW kg-1, matching or surpassing many biomass-derived ZHSC cathodes prepared using more corrosive chemicals. Overall, this work demonstrates a greener, yield-efficient pathway to high-performance carbon cathodes for aqueous zinc-based hybrid energy storage., This work is part of the eNargiZinc project, funded by the European Union’s Horizon Europe programme (Marie Skłodowska-Curie actions) under the Grant Agreement No. 101120311. The authors also acknowledge funding from the Aragon Government (T22_23R). V. S. acknowledges support from the Spanish Ministry of Science and Innovation (grant PID2021-127847OB-I00 and PID2024-160339OB-I00), CIBER-BBN, ELECMI, and NANBIOSIS ICTS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Macrophage-mediated in vivo intracellular crystallization of aluminum oxyhydroxide adjuvant in vaccine-induced granulomas

  • Pérez, Estela
  • Navarro, Marta
  • Ibarra, Alfonso
  • Blas, Ignacio de
  • Perez, Marta
  • Luján, Lluís
  • Sebastián, Víctor
Aluminum (Al) in the form of γ-aluminum oxyhydroxide (γ-AlOOH) nanoparticles has been used as a vaccine adjuvant for nearly a century. At injection sites, animals and humans develop granulomatous inflammation, in which macrophages may contain intracellular crystalline-like structures, so-called crystalloid bodies (CBs), morphologically distinct from the injected adjuvant. This raised the hypothesis that CBs may originate from the in vivo crystallization of γ-AlOOH within macrophages. To test this, six sheep received two subcutaneous doses of a γ-AlOOH-adjuvanted viral vaccine, while six controls received the same antigen without an adjuvant. All injection sites (AlOOH: n = 12; controls: n = 12) were examined by hematoxylin and eosin, modified aluminum hematoxylin, and lumogallion fluorescence. Al and CBs occurred exclusively in AlOOH-vaccinated tissues. The adjuvant stock and vaccine formulations were characterized ex situ using a combination of structural and imaging techniques. Four granulomas containing CBs, collected 133 days postinjection, were further examined using in situ imaging and crystallographic approaches. No crystalline structures resembling CBs were identified in the injected products; only γ-AlOOH nanoparticles were present. In post-mortem granulomas, macrophages contained Al-positive vacuoles filled with nanoparticle aggregates compatible with γ-AlOOH, often adjacent to CBs. Crystallographic analyses demonstrated that CBs were highly ordered γ-Al2O3 microcrystals, and advanced SEM-EDS with elemental mapping similarly distinguished γ-AlOOH nanoparticles and CBs as separate phases. These findings support an in vivo formation of γ-Al2O3 microcrystals from γ-AlOOH nanoparticles within macrophages under physiological conditions. To our knowledge, these findings provide evidence consistent with Al crystallization within mammalian cells and suggest that macrophage phagolysosomal conditions may represent a previously unrecognized biomimetic pathway for γ-Al2O3 formation. This finding may offer a biological model for the development of green and low-energy synthesis strategies for γ-Al2O3, with potential industrial applications as well as relevance to immunotoxicology, pathology, and cell biology in the context of vaccine adjuvants., This study was funded by the Ministry of Science, Innovation and Universities (grants RTI2018−096172−B-C33, PID2024−160339OB-I00, and PID2021−127847OB-I00). E.P. was supported by the Ministry of Science, Innovation and Universities (FPU19/00553). Additional support was provided by the Institute of Nanoscience and Materials of Aragon (INMA) through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023−001286-S), funded by MICIU/AEI (10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidic-assisted coating of nanoparticles by membranes from extracellular vesicles

  • Alonso-Campos, Pablo
  • Balas, Francisco
  • Hueso, José L.
  • Sebastián, Víctor
  • Sancho‐Albero, María
  • Santamaría, Jesús
Extracellular vesicle (EV)-based nanotherapies represent a promising alternative in cancer nanomedicine thanks to their targeting properties. However, two major issues remain when combining nanoparticles (NPs) with EVs: (1) safety concerns of cancer-derived EVs related to their oncogenic nature and (2) lack of robust, reproducible, and efficient strategies for NPs coating with EVs membranes. To overcome these main challenges, in this study, we have combined a microfluidic platform to direct the reassembly of previously isolated EVs-derived membranes from lung cancer cells onto fluorescent silica NPs (FSNs). These FSNs leverage the versatile surface functionalization of silica NPs together with intrinsic fluorescent properties for precise intracellular tracking of our hybrids, avoiding membrane-labeling fluorescent probes. While preserving the tumor-targeting properties of natural lung cancer-derived EVs, the proposed microfluidic strategy offers superior handling and manipulation of the process to guarantee (1) homogeneous EV-like coating (6.3 nm thick), (2) high reproducibility, (3) efficient coating yields (87.8% of the NPs were coated), and (4) selective tumor-targeting properties (8.0- and 4.3-fold increases for parental A549 tumoral cells compared to HeLa and fibroblasts at 4 h, respectively). This technology enables the fabrication of biomimetic hybrid core–shell structures with high precision and stability in a continuous process that is more amenable to scaling up., The authors thank the Spanish Government, University, Innovation and Science Ministry (CONCERT project). PAC thanks the Spanish Government for a FPU PhD research fellowship. VS acknowledges funding from project PID2024160339OB-I00 and PID2021-127847OB-I00 MCIN/AEI/ 10.13039/501100011033. MS-A thanks the AECC for postdoctoral research fellowship funding (POSTD234966SANC), “Ayuda a Talento AECC 2023,” and for a Ramón y Cajal Fellowship (RYC2024-050017-I). The group thanks the Spanish National Research Council (CSIC) (Beca JAE Intro 2024). We thank “Centro de Excelencia Severo Ochoa” (CEX2023-001286 S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microfluidic reactors for the synthesis of inorganic and hybrid nanoparticles for drug delivery

  • Sebastián, Víctor
Inorganic nanoparticles (NPs) have played a central role in the development of nanomedicine, offering unique physicochemical properties that enable imaging, therapy, and multifunctional drug delivery. Despite extensive progress, the clinical translation of nanomedicines remains limited, largely due to challenges associated with reproducibility, scalability, toxicity, and, critically, inefficient delivery to target tissues. In this context, microfluidic technologies have emerged as a powerful platform to address many of these limitations by enabling continuous, highly controlled, and reproducible NP synthesis under well-defined flow conditions. This review provides a comprehensive overview of recent advances in the continuous-flow microfluidic synthesis of inorganic NPs for drug delivery applications. Key microfluidic parameters governing NP formation are discussed, including mixing regimes, residence time, flow configuration, and scale-up, and analyze how these factors influence size, dispersity, composition, and functional performance. Particular attention is devoted to plasmonic NPs, non-metallic magnetic NPs, and other relevant inorganic systems such as quantum dots and silica NPs, highlighting both achievements and remaining challenges in their microfluidic production. Beyond purely inorganic NPs, the review examines the growing field of hybrid organic–inorganic NPs, where inorganic cores are integrated with polymers, lipids, or biomimetic components to combine synthetic functionality with biological performance. These hybrid architectures represent a promising strategy to overcome key barriers in drug delivery, including immune clearance, poor targeting efficiency, and limited therapeutic index, while posing additional synthetic and integration challenges that microfluidics is uniquely positioned to address. Finally, current bottlenecks and future perspectives for microfluidic nanomanufacturing are discussed, including productivity, multistep process integration, in-line purification, and automation. Microfluidic platforms, especially when combined with hybrid and bioinspired NP design, are positioned as enabling technologies to bridge the gap between advanced NP engineering and clinically translatable nanomedicines., The author acknowledges funding from project PID2024-160339OB-I00, PID2021-127847OB-I00 MCIN/AEI/10.13039/501100011033 and Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Translating hybrid CuS-indocyanine green-polymer nanoparticle production into flow: Multistage synthesis, purification, and photodynamic biocidal activity

  • Ruiz-Bozal, Pablo
  • Abengochea-Quílez, Lucia
  • Bescos, Isabel
  • Herrero, Pablo
  • Yus, Cristina
  • Arruebo, Manuel
  • Sebastián, Víctor
Data will be made available on request., Hybrid polymeric nanoparticles encapsulating indocyanine green (ICG) and decorated with copper sulfide (Cu₂–ₓS) were synthesized using semi-continuous micro- and millifluidic reactors (RS-PLGA-ICG@μCuS and RS-PLGA-ICG@mCuS, respectively). By leveraging both components as NIR-active photosensitizers, these nanoparticles were developed for enhanced antimicrobial photodynamic therapy. Continuous microfluidic processing enabled higher ICG loading than batch synthesis while maintaining tight control over particle size, ζ-potential, and copper content. Computational fluid dynamics modelling of the micromixer revealed the critical role of flow patterns and local shear stresses in achieving homogeneous nanoprecipitation. Continuous downstream processing was implemented using hollow-fiber tangential flow filtration, enabling solvent removal and nanoparticle conditioning under flow. A millifluidic reactor was further introduced as a scale-out strategy, increasing production throughput while preserving reproducibility of nanoparticle properties., Photodynamic performance was assessed using DHR 123 and SOSG probes, confirming efficient reactive oxygen species generation, predominantly via type I pathways, with 50 ppm ICG identified as the optimal concentration. Both micro- and millifluidic formulations showed reproducible activity. Bactericidal assays demonstrated significant efficacy against planktonic and biofilm-forming Staphylococcus aureus ATCC 25923, achieving higher log reductions than batch-produced nanoparticles due to improved photosensitizer encapsulation. Cytotoxicity studies with human dermal fibroblasts confirmed viability above ISO 10993-5 thresholds (>70%), with continuous-flow formulations exhibiting reduced copper-related toxicity., The semi-continuous strategy developed represents a scalable and intensified platform for manufacturing multifunctional antibacterial nanovectors with enhanced performance and biocompatibility., V.S acknowledges support from the Spanish Ministry of Science and Innovation (grant (PID2021-127847OB-I00, PDC2022-133866-I00 and PID2024-160339OB-I00), CIBER-BBN, ELECMI and NANBIOSIS ICTSs. Additional support was provided by the Institute of Nanoscience and Materials of Aragon (INMA) through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023-001286-S), funded by MICIU/AEI (10.13039/501100011033). This work was also financially supported by MICIN/AEI (PDI2021-1261132NB-100 and PID2023-146091OB-I00)., CEX2023-001286-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A smartphone-assisted approach to formaldehyde detection using diethanolamine-grafted carbon nanoparticles

  • Santonocito, Rossella
  • Russo, Lorenzo
  • Sebastián, Víctor
  • Ferlazzo, Angelo
  • Gulino, Antonino
  • Petroselli, Manuel
  • Ruffino, Roberta
  • Li Destri, Giovanni
  • Pappalardo, Andrea
  • Tuccitto, Nunzio
  • Cavallaro, Alessia
  • Trusso Sfrazzetto, Giuseppe
Formaldehyde (FA) is a well-known indoor pollutant and human carcinogen, making the development of field-deployable sensors for its monitoring crucial for public safety. Herein, we report a facile strategy to synthesize carbon nanoparticles functionalized with diethanolamine (CNPs-DEA) as FA sensors. The strategic surface functionalization dictates a specific spatial arrangement that is key to efficient and cooperative interaction with the analyte. In water solution, the probe exhibits a LOD of 46 ppb with a binding constant (log β) value of 4.31 ± 0.01. By immobilizing the CNPs on polyamide membranes, we engineered a solid-state strip test integrated with a 3D-printed smartphone readout platform. This setup delivers an ultralow detection threshold (1 ppb) for gaseous FA and, crucially, maintains robust performance under saturated humidity conditions, overcoming a major limitation of conventional carbon-based sensors. The practical utility of the device was validated by quantifying FA in commercial paint samples. Combining operational simplicity, low cost, and high sensitivity, this platform represents a robust early warning tool for air quality monitoring, bridging the gap between sophisticated laboratory instrumentation and accessible real-world applications., G.T.S., G.L.D., N.T. thank the ERMES project, funded under European Union’s Horizon Europe EIC Pathfinder Open programme, grant agreement No. 101185661. V.S. acknowledges funding from project PID2024-160339OB-I00, PID2021-127847OB-I00 MCIN/AEI/10.13039/501100011033 and Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. These analyses were performed in LMA-ELECMI and Nanbiosis ICTSs. M.P. thanks Corrado Bacchiocchi at the University of Camerino for the technical support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Extracellular vesicles as nanoparticle delivery vectors in cancer therapy

  • Sancho‐Albero, María
  • Martín-Pardillos, Ana
  • Hueso, José L.
  • Sebastián, Víctor
  • Santamaría, Jesús
Three decades after the approval of the first cancer nanomedicine, low (<1%) tumor delivery remains the central unsolved challenge in nanoparticle (NP)-based therapy. This barrier has prompted a research shift toward biologically derived delivery systems able to reduce immune clearance while preserving tumor-homing capabilities. In particular, extracellular vesicles (EVs) seem obvious candidates on account of their intrinsic biocompatibility, cell-specific tropism, and biological functionality. In this mini-review, we critically analyze EVs as nanoparticle delivery vectors in cancer therapy. We describe current EV engineering approaches, including loading methodologies, surface modification strategies, and the development of artificial or biomimetic EVs, highlighting technical, scalability, and characterization challenges. We also summarize key in vitro and in vivo results, addressing encapsulation strategy, biodistribution, and therapeutic outcomes. From this discussion, we outline research needs that must be addressed to develop EV–NP hybrids as tools to overcome the delivery challenge in cancer., Authors are thankful for the support from the Spanish Ministry of Science, Innovation and Universities from the Spanish Government (grants PID2023-148732NB-I00 and PID2024-160339OB-I00), the European Research Council (ERC-Advanced Grant ROMEO number 101201543), and Severo Ochoa Excellence Program: CEX2023-001286-S. M.S.-A. acknowledges the Spanish Ministry of Science, Innovation and Universities from the Spanish Government a Ramón y Cajal Fellowship (RYC2024-050017-I)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unlocking the potential of bacterial membrane vesicles: Advances in isolation techniques and biomedical applications

  • Canalejo-Marco, Gonzalo
  • Arruebo, Manuel
  • Sebastian, Victor
Bacterial membrane vesicles (MVs) are nanosized, lipid bilayer-enclosed structures released by both Gram-positive (commonly referred as MVS, bacterial membrane vesicles) and Gram-negative bacteria (commonly referred as OMVs, outer membrane vesicles and outer-inner membrane vesicles (OIMVs)). They carry proteins, lipids, nucleic acids, and metabolites, playing key roles in intercellular communication, host–pathogen interactions, and immune modulation. Owing to these properties, MVs are attracting growing interest as versatile tools for vaccine development, drug delivery, and diagnostic applications. However, their translation remains constrained by low production yields, potential toxicity, and the lack of standardized isolation and characterization methods. This review summarizes current knowledge on MV composition and biogenesis, with a particular focus on emerging strategies for their isolation and engineering, and highlights their biomedical potential while outlining the challenges that must be overcome to enable future clinical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidic-Assisted Coating of Nanoparticles by Membranes from Extracellular Vesicles

  • Alonso-Campos, Pablo
  • Balas, Francisco
  • Hueso, Jose L.
  • Sebastián, Víctor
  • Sancho-Albero, María
  • Santamaría, Jesus
Extracellular vesicle (EV)-based nanotherapies represent a promising alternative in cancer nanomedicine thanks to their targeting properties. However, two major issues remain when combining nanoparticles (NPs) with EVs: (1) safety concerns of cancer-derived EVs related to their oncogenic nature and (2) lack of robust, reproducible, and efficient strategies for NPs coating with EVs membranes. To overcome these main challenges, in this study, we have combined a microfluidic platform to direct the reassembly of previously isolated EVs-derived membranes from lung cancer cells onto fluorescent silica NPs (FSNs). These FSNs leverage the versatile surface functionalization of silica NPs together with intrinsic fluorescent properties for precise intracellular tracking of our hybrids, avoiding membrane-labeling fluorescent probes. While preserving the tumor-targeting properties of natural lung cancer-derived EVs, the proposed microfluidic strategy offers superior handling and manipulation of the process to guarantee (1) homogeneous EV-like coating (6.3 nm thick), (2) high reproducibility, (3) efficient coating yields (87.8% of the NPs were coated), and (4) selective tumor-targeting properties (8.0- and 4.3-fold increases for parental A549 tumoral cells compared to HeLa and fibroblasts at 4 h, respectively). This technology enables the fabrication of biomimetic hybrid core−shell structures with high precision and stability in a continuous process that is more amenable to scaling up.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Microfluidic reactors for the synthesis of inorganic and hybrid nanoparticles for drug delivery

  • Sebastián, Víctor
Inorganic nanoparticles (NPs) have played a central role in the development of nanomedicine, offering unique physicochemical properties that enable imaging, therapy, and multifunctional drug delivery. Despite extensive progress, the clinical translation of nanomedicines remains limited, largely due to challenges associated with reproducibility, scalability, toxicity, and, critically, inefficient delivery to target tissues. In this context, microfluidic technologies have emerged as a powerful platform to address many of these limitations by enabling continuous, highly controlled, and reproducible NP synthesis under well-defined flow conditions. This review provides a comprehensive overview of recent advances in the continuous-flow microfluidic synthesis of inorganic NPs for drug delivery applications. Key microfluidic parameters governing NP formation are discussed, including mixing regimes, residence time, flow configuration, and scale-up, and analyze how these factors influence size, dispersity, composition, and functional performance. Particular attention is devoted to plasmonic NPs, non-metallic magnetic NPs, and other relevant inorganic systems such as quantum dots and silica NPs, highlighting both achievements and remaining challenges in their microfluidic production. Beyond purely inorganic NPs, the review examines the growing field of hybrid organic–inorganic NPs, where inorganic cores are integrated with polymers, lipids, or biomimetic components to combine synthetic functionality with biological performance. These hybrid architectures represent a promising strategy to overcome key barriers in drug delivery, including immune clearance, poor targeting efficiency, and limited therapeutic index, while posing additional synthetic and integration challenges that microfluidics is uniquely positioned to address. Finally, current bottlenecks and future perspectives for microfluidic nanomanufacturing are discussed, including productivity, multistep process integration, in-line purification, and automation. Microfluidic platforms, especially when combined with hybrid and bioinspired NP design, are positioned as enabling technologies to bridge the gap between advanced NP engineering and clinically translatable nanomedicines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Translating hybrid CuS-indocyanine green-polymer nanoparticle production into flow: Multistage synthesis, purification, and photodynamic biocidal activity

  • Ruiz-Bozal, Pablo
  • Abengochea, Lucia
  • Bescos, Isabel
  • Herrero, Paola
  • Yus, Cristina
  • Arruebo, Manuel
  • Sebastian, Victor
Hybrid polymeric nanoparticles encapsulating indocyanine green (ICG) and decorated with copper sulfide (Cu₂–ₓS) were synthesized using semi-continuous micro- and millifluidic reactors (RS-PLGA-ICG@μCuS and RS-PLGA-ICG@mCuS, respectively). By leveraging both components as NIR-active photosensitizers, these nanoparticles were developed for enhanced antimicrobial photodynamic therapy. Continuous microfluidic processing enabled higher ICG loading than batch synthesis while maintaining tight control over particle size, ζ-potential, and copper content. Computational fluid dynamics modelling of the micromixer revealed the critical role of flow patterns and local shear stresses in achieving homogeneous nanoprecipitation. Continuous downstream processing was implemented using hollow-fiber tangential flow filtration, enabling solvent removal and nanoparticle conditioning under flow. A millifluidic reactor was further introduced as a scale-out strategy, increasing production throughput while preserving reproducibility of nanoparticle properties. Photodynamic performance was assessed using DHR 123 and SOSG probes, confirming efficient reactive oxygen species generation, predominantly via type I pathways, with 50 ppm ICG identified as the optimal concentration. Both micro- and millifluidic formulations showed reproducible activity. Bactericidal assays demonstrated significant efficacy against planktonic and biofilm-forming Staphylococcus aureus ATCC 25923, achieving higher log reductions than batch-produced nanoparticles due to improved photosensitizer encapsulation. Cytotoxicity studies with human dermal fibroblasts confirmed viability above ISO 10993-5 thresholds (>70%), with continuous-flow formulations exhibiting reduced copper-related toxicity. The semi-continuous strategy developed represents a scalable and intensified platform for manufacturing multifunctional antibacterial nanovectors with enhanced performance and biocompatibility.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Macrophage-Mediated In Vivo Intracellular Crystallization of Aluminum Oxyhydroxide Adjuvant in Vaccine-Induced Granulomas

  • Pérez, Estela
  • Navarro, Marta
  • Ibarra, Alfonso
  • de Blas, Ignacio
  • Pérez, Marta
  • Luján, Lluís
  • Sebastián, Víctor
Aluminum (Al) in the form of γ-aluminum oxyhydroxide (γ-AlOOH) nanoparticles has been used as a vaccine adjuvant for nearly a century. At injection sites, animals and humans develop granulomatous inflammation, in which macrophages may contain intracellular crystalline-like structures, so-called crystalloid bodies (CBs), morphologically distinct from the injected adjuvant. This raised the hypothesis that CBs may originate from the in vivo crystallization of γ-AlOOH within macrophages. To test this, six sheep received two subcutaneous doses of a γ-AlOOH-adjuvanted viral vaccine, while six controls received the same antigen without an adjuvant. All injection sites (AlOOH: n = 12; controls: n = 12) were examined by hematoxylin and eosin, modified aluminum hematoxylin, and lumogallion fluorescence. Al and CBs occurred exclusively in AlOOH-vaccinated tissues. The adjuvant stock and vaccine formulations were characterized ex situ using a combination of structural and imaging techniques. Four granulomas containing CBs, collected 133 days postinjection, were further examined using in situ imaging and crystallographic approaches. No crystalline structures resembling CBs were identified in the injected products; only γ-AlOOH nanoparticles were present. In post-mortem granulomas, macrophages contained Al-positive vacuoles filled with nanoparticle aggregates compatible with γ-AlOOH, often adjacent to CBs. Crystallographic analyses demonstrated that CBs were highly ordered γ-Al2O3 microcrystals, and advanced SEM-EDS with elemental mapping similarly distinguished γ-AlOOH nanoparticles and CBs as separate phases. These findings support an in vivo formation of γ-Al2O3 microcrystals from γ-AlOOH nanoparticles within macrophages under physiological conditions. To our knowledge, these findings provide evidence consistent with Al crystallization within mammalian cells and suggest that macrophage phagolysosomal conditions may represent a previously unrecognized biomimetic pathway for γ-Al2O3 formation. This finding may offer a biological model for the development of green and low-energy synthesis strategies for γ-Al2O3, with potential industrial applications as well as relevance to immunotoxicology, pathology, and cell biology in the context of vaccine adjuvants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Extracellular Vesicles as Nanoparticle Delivery Vectors in Cancer Therapy

  • Sancho-Albero, Maria
  • Martín-Pardillos, Ana
  • Hueso, Jose L.
  • Sebastián, Víctor
  • Santamaria, Jesús
Three decades after the approval of the first cancer nanomedicine, low (<1%) tumor delivery remains the central unsolved challenge in nanoparticle (NP)-based therapy. This barrier has prompted a research shift toward biologically derived delivery systems able to reduce immune clearance while preserving tumor-homing capabilities. In particular, extracellular vesicles (EVs) seem obvious candidates on account of their intrinsic biocompatibility, cell-specific tropism, and biological functionality. In this mini-review, we critically analyze EVs as nanoparticle delivery vectors in cancer therapy. We describe current EV engineering approaches, including loading methodologies, surface modification strategies, and the development of artificial or biomimetic EVs, highlighting technical, scalability, and characterization challenges. We also summarize key in vitro and in vivo results, addressing encapsulation strategy, biodistribution, and therapeutic outcomes. From this discussion, we outline research needs that must be addressed to develop EV–NP hybrids as tools to overcome the delivery challenge in cancer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Smartphone-Assisted Approach to Formaldehyde Detection Using Diethanolamine-Grafted Carbon Nanoparticles

  • Santonocito, Rossella
  • Russo, Lorenzo
  • Sebastian, Victor
  • Ferlazzo, Angelo
  • Gulino, Antonino
  • Petroselli, Manuel
  • Ruffino, Roberta
  • Li Destri, Giovanni
  • Pappalardo, Andrea
  • Tuccitto, Nunzio
  • Cavallaro, Alessia
  • Trusso Sfrazzetto, Giuseppe
Formaldehyde (FA) is a well-known indoor pollutant and human carcinogen, making the development of field-deployable sensors for its monitoring crucial for public safety. Herein, we report a facile strategy to synthesize carbon nanoparticles functionalized with diethanolamine (CNPs-DEA) as FA sensors. The strategic surface functionalization dictates a specific spatial arrangement that is key to efficient and cooperative interaction with the analyte. In water solution, the probe exhibits a LOD of 46 ppb with a binding constant (log β) value of 4.31 ± 0.01. By immobilizing the CNPs on polyamide membranes, we engineered a solid-state strip test integrated with a 3D-printed smartphone readout platform. This setup delivers an ultralow detection threshold (1 ppb) for gaseous FA and, crucially, maintains robust performance under saturated humidity conditions, overcoming a major limitation of conventional carbon-based sensors. The practical utility of the device was validated by quantifying FA in commercial paint samples. Combining operational simplicity, low cost, and high sensitivity, this platform represents a robust early warning tool for air quality monitoring, bridging the gap between sophisticated laboratory instrumentation and accessible real-world applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing PLGA nanosphere synthesis in a continuous ultrasonic microreactor: A design of experiments and machine learning joint approach

  • Chen, Huiyu
  • Bassim, Oussama
  • Udepurkar, Aniket Pradip
  • Sebastián Cabeza, Victor
  • Kuhn, Simon
Nanospheres hold strong promise as drug-delivery carriers but face challenges in precisely achieving target particle sizes required for specific biomedical applications. Here, we present a novel strategy that leverages the synergy between Design of Experiments (DoE) and Machine Learning (ML) to optimize and predict poly(lactic-co-glycolic acid) (PLGA) nanosphere synthesis in a continuous ultrasonic microreactor. DoE screening and optimization were first performed to maximize information gain while minimizing experimental runs, generating 41 statistically designed experiments for ML model training. Hyperparameters of five traditional ML models and one deep learning model were then systematically optimized using this dataset. To independently evaluate model performance, 12 additional experiments were conducted to assess predictive accuracy and computational efficiency. Among all models, k-nearest neighbours achieved the highest accuracy (R-sq = 0.92) with the shortest computation time. Overall, this work demonstrates an efficient DoE-ML framework for rapid, accurate, and data-driven tuning of nanosphere size for nanomedicine applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sensing of human stress biomarkers using BODIPY-functionalized carbon nanoparticles

  • Cavallaro, Alessia
  • Spinello, Michael
  • Sebastián, Víctor
  • Ferlazzo, Angelo
  • Gulino, Antonino
  • Ruffino, Roberta
  • Destri, Giovanni Li
  • Pappalardo, Andrea
  • Tuccitto, Nunzio
  • Sfrazzetto, Giuseppe Trusso
  • Santonocito, Rossella
Stress affects many aspects of human functioning, and its effects on cognition are particularly relevant in high performance scenarios such as military operations and space missions. Dopamine, noradrenaline, and cortisol are key biomarkers associated with stress, anxiety, depression, and cardiovascular disease, yet their qualitative and quantitative detection usually requires lengthy laboratory analyses and lacks a single, selective one-pot method. In this work, we developed a fluorescent nanosensor based on carbon nanoparticles functionalized with a BODIPY-based fluorophore (CNPs-Ar-BDPy) for the detection and discrimination of dopamine, noradrenaline, and cortisol in aqueous solution. The sensing platform exploits the carbon nanoparticle core as a structural scaffold and the BODIPY moiety as a recognition site, enabling specific interactions with catecholamines and cortisol through hydrogen bonding between the BODIPY fluorine atoms and the OH and C=O groups of the analytes. The CNPs-Ar-BDPy were synthesized, functionalized, and fully characterized by UV Vis and fluorescence spectroscopy, and their sensing performance was evaluated in aqueous media using fluorescent titration and FT-IR. Selectivity was further assessed using multivariate analysis by PLS-DA, demonstrating effective discrimination among the three biomarkers. In addition, the role of the covalent linkage between the carbon nanoparticle core and the BODIPY unit was investigated, and the obtained apparent affinity constants were compared with those of analogous nanoprobes featuring a non-rigid, non-preorganized spacer. The rigid aryl linked BODIPY proved to enhance binding by about two orders of magnitude, highlighting the importance of structural preorganization and fluorescence continuity across the core fluorophore interface. The proposed nanosensor thus represents a promising tool for rapid, selective monitoring of stress related biomarkers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and mechanistic insights on the CO2 hydrogenation to ethanol over KRhFe supported catalysts: a study of support effect

  • Latsiou, Angeliki I.
  • Charisiou, Nikolaos D.
  • Frontistis, Zacharias
  • Naikwadi, Dhanaji
  • Bansode, Atul
  • Mariani, Pietro
  • Orsilli, Jacopo
  • D’Arienzo, Massimiliano
  • Sebastián, Víctor
  • Marshall, Ali
  • Potter, Matthew E.
  • Goula, Maria A.
The effect of the support on the CO2 hydrogenation to ethanol reaction over KRhFe catalysts supported on different oxides (SiO2, Al2O3, TiO2, TiO2-ZrO2, and SiO2-Al2O3) was investigated through a multi-technique approach combining catalytic tests with extensive physicochemical characterisation, including XAS and operando DRIFTS-MS. H2-TPR, TEM and XAS analyses revealed that non-reducible supports, such as SiO2 and Al2O3, stabilise partially oxidised, well-dispersed Rh and Fe species, while maintaining moderate Rh–Fe interactions. In contrast, reducible supports like TiO2 and TiO2-ZrO2 facilitate the reduction of RhOx and FeOx species. This translates into markedly different catalytic behaviours: SiO2 and Al2O3-supported catalysts exhibited enhanced selectivity towards ethanol, whereas TiO2 and TiO2-ZrO2-supported catalysts showed higher CO2 conversion, predominantly yielding CO and CH4. Operando DRIFTS-MS results further revealed plausible support-dependent surface intermediates and reaction pathways. The SiO2-supported catalyst appears to mainly follow a CO-mediated pathway, while the Al2O3-supported catalyst exhibited intense formate-related features, suggesting the participation of formate/methoxy intermediates in oxygenate formation. In contrast, TiO2 promoted RWGS and methanation reactions, limiting C–C coupling. Finally, the incorporation of ZrO2 into the support (TiO2-ZrO2) improved the formation of oxygenates compared to TiO2 alone, likely due to enhanced stabilisation of adsorbed CO species and their coupling with methoxy intermediates. Overall, these results underscore the critical role of metal–support interactions in governing the selectivity between C1 products and oxygenates during high-pressure CO2 hydrogenation.