Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Fast successive self-nucleation and annealing (SSA) thermal fractionation protocol for the characterization of polyolefin blends from mechanical recycling

  • Góra, Magdalena
  • Tranchida, Davide
  • Albrecht, Albert
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
The sorting stage of mechanical recycling of post-consumer polyolefins has severe challenges. Polypropylene (PP) is often contaminated with polyethylene (PE) and vice versa. To meet quality requirements, characterization of the recycled pellets is needed. To address this problem, fast characterization generating a statistical assessment of the content of the various batches from recycling is required. This investigation shows that the use of fast scanning rates (in a conventional Differential Scanning Calorimeter) in the successive self-nucleation and annealing (SSA) protocol can reduce the thermal fractionation time, without losing resolution power, as long as the increase in heating/cooling rate is compensated by reducing sample mass. Using a “coupled SSA protocol” for polypropylene and polyethylene fractions at a rate of 10 °C/min, the measurement time is approximately 420 min. Implementing mass compensation, faster heating rates (i.e., 30 °C/min) and using a single-fraction protocol, sufficient to determine the content of PP and high-density PE, reduced the time of the measurement to 75 min. Examples of fractionations of commercial post-consumer and post-industrial recycled polyolefin blends conducted at a faster rate are provided. The derived polyolefin content is compared with the standard temperature rising elution fractionation analysis to assess the validity of the proposed method., The authors acknowledge the financial support from the REPOL project; this project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 860221. Furthermore, the authors would like to thank Enrico Carmeli for training M.G. and Vitor Barroso for supervision in the early stage of this study.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Effect of compatibilizer addition on the surface nucleation of dispersed polyethylene droplets in a self-nucleated polypropylene matrix

  • Coba Daza, Jorge Sebastián
  • Carmeli, Enrico
  • Otaegi Tena, Itziar
  • Aramburu Ocáriz, Nora
  • Guerrica Echevarría Estanga, Gonzalo María
  • Kahlen, Sussane
  • Cavallo, Dario
  • Tranchida, Davide
  • Müller Sánchez, Alejandro Jesús
A significant portion of the global plastics market encompasses the production of polyolefin materials and especially polypropylene (PP) and polyethylene (PE), as commodity polymers with a wide range of applications. However, the increase in the generation of unsustainable plastic waste requires a close technological look-up to address this challenge adequately. In this context, mechanical recycling is part of the strategies expected to contribute to the solution. Nevertheless, the melt blending process presents a challenge due to the immiscibility between PP and PE. Therefore, compatibilization strategies are meant to solve the problem effectively. In this paper, we employ a commercial ethylene-ran-methyl acrylate random copolymer as a compatibilizer for PP/PE blends. With the addition of the compatibilizer, it was possible to obtain a 44% reduction in PE domain size, while ductility increased by around similar to 40% with respect to uncompatibilized blends. Interesting results were obtained concerning the crystallization behavior of the blends. The overall isothermal crystallization kinetics of the different blend components was studied, and a synergistic nucleation effect of the PP and the compatibilizer toward the PE phase was found. For the first time, the effect of the compatibilizer on the surface nucleation of PE in a self-nucleated PP matrix phase is reported. An enhancement in the crystallization rate of PE was found when the self-nucleation protocol was applied to the polypropylene matrix phase for neat and compatibilized blends. The nucleation efficiency was in the range of 120-124%, indicating a supernucleation behavior. The induced crystallization at the interface by the self-nucleated polypropylene is the reason for such high nucleation efficiencies. Surprisingly, a higher amount of compatibilizer decreases the overall crystallization rate of PE droplets. The compatibilizer segregates at the interface between both polymers, reducing the surface nucleation of the PE droplets on the PP matrix phase. The results presented in this paper lead the way toward improving the use of post-consumer recycled materials., All of the sources of funding for the work described in this publication are acknowledged below: This work has received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No 860221 under the name of the REPOL project.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Surface-enhanced nucleation in immiscible polypropylene and polyethylene blends: The effect of polyethylene chain regularity

  • Góra, Magdalena
  • Coba Daza, Jorge Sebastián
  • Carmeli, Enrico
  • Tranchida, Davide
  • Albrecht, Andreas
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
In blends where polyethylene (PE) is the minor component dispersed in an isotactic-polypropylene (PP) matrix, an enhancement of the crystallization rate of PE was found when the crystallization temperature of the matrix phase is increased by means of a self-nucleation protocol. Such an effect is interpreted as the result of the epitaxial nucleation of PE droplet domains at the interface with the PP matrix (Macromolecules, 2021, 54, 19, 9100–9112). This study extends the findings on immiscible blends of a PP matrix and various industrially produced PE grades as the dispersed phase. Eight different PEs with varying molecular architecture, and thus density and melting temperatures, were mixed with PP in a 20/80 PE/PP weight ratio. The possible existence of surface nucleation was probed by applying a self-nucleation thermal protocol to the PP matrix and recording the concomitant variation of PE crystallization temperature (Tc). Different behaviours are observed for various PEs. In particular, those with relatively high density display a clear increase in crystallization temperature, over 3.0 °C, when the Tc of the matrix is increased (i.e., as PP lamellar thickness increased), indicating an efficient surface nucleation mechanism. Metallocene-made LLDPE also shows a small increase, about 1.7 °C, while PEs with lower densities, below 927 kg/m3, metallocene PEs or LDPE display no meaningful change in Tc with matrix self-nucleation. It was demonstrated that a threshold value of chain regularity is required to trigger the surface nucleation of PE on PP. Only polymers with a density above approximately 920 kg/m3 and melting temperatures exceeding about 115 °C can efficiently nucleate onto the PP substrate. It is postulated that the presence of a high amount of branches or comonomers along the PE chains hinders the epitaxial matching between PE and PP., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 860221. AJM acknowledges funding from the Basque Government through grant IT1503-22.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Recent Applications of the Successive Self-nucleation and Annealing (SSA) Thermal Fractionation Technique, Recent applications of the Successive Self-nucleation and Annealing thermal fractionation technique

  • Pérez Camargo, Ricardo Arpad
  • Cavallo, Dario
  • Müller Sánchez, Alejandro Jesús
Successive Self-nucleation and Annealing (SSA) is a thermal fractionation technique that is performed by Differential Scanning Calorimetry (DSC). The combination of non-isothermal and isothermal steps applied during SSA achieves efficient molecular segregation during polymer crystallization. Such molecular segregation magnifies the effect of defects in polymer chain crystallization, thereby providing information on chain structure. The technique was created and implemented by Müller and co-workers in 1997, becoming a powerful resource for studying ethylene/α-olefin copolymers. The different variables to design the SSA protocol: fractionation window, fractionation time, scanning rate, sample mass, and the first self-nucleation temperature to be applied (Ts, ideal), have been previously reviewed, together with the different applications of SSA. SSA versatility, simplicity (when properly applied), and short times to produce results have allowed its use to study novel and more complex polymeric systems. This review article explores the most recent applications of SSA of the past decade. First, the principles of the technique are briefly explained, covering all the relevant variables. Next, we have selected different cases that show how SSA is employed in various novel fields, such as studying intermolecular interactions and topological effects in homopolymers; supernucleation and antinucleation effects in nanocomposites, including the pre-freezing phenomenon; crystallization modes in random copolymers; solid-solid transitions; miscibility, co-crystallization and composition in blends; evaluation of polymer synthesis variables; and the novel information that could be gained by using fast scanning chip-based calorimetry. Finally, we offer a perspective on SSA, a technique that has become a powerful method for studying the distribution of defects affecting crystallization in semi-crystalline polymers., This work has received funding from the Basque Government through grant IT1503-22 and from MICINN (PID2020-113045GB-C21). We would also like to acknowledge the financial support from the BIODEST and the REPOL projects; these projects have received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreements No. 778092 and No. 860221. It has also been supported by the National Natural Science Foundation of China (51820105005, 52050410327).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Understanding polymer nucleation by studying droplets crystallization in immiscible polymer blends

  • Fenni, Seif Eddine
  • Müller Sánchez, Alejandro Jesús
  • Cavallo, Dario
This Feature Article reviews our recent work on the nucleation and crystallization of finely dispersed semicrystalline polymeric droplets in immiscible matrices. Droplets dispersions can be used as a toolbox to investigate polymer nucleation. Studying the overall crystallization kinetics of the droplets can be a way to separate the contributions of nucleation and growth rates depending on the sample. To characterize the relative importance of nucleation versus growth, we have defined a dimensionless parameter named the “Turnbull number”. This number equals the ratio of the time needed for a crystal to grow inside the average droplet volume, divided by the required time for nucleation to occur in the same droplet. We show examples for Turnbull numbers close to unity, where the overall crystallization kinetics of the droplets is dominated by crystal growth, and a sigmoidal (second or third order) kinetics is obtained. On the other hand, when the overall crystallization of the droplets is controlled by nucleation, very low Turnbull numbers are obtained (e.g., 0.1–0.01) with concomitant first-order kinetics. We also show how the nucleation step in the droplets can be skipped through the strategic use of self-nucleation. In the case of double crystalline polymer blends, the self-nucleation of the matrix can be used to study the surface nucleation of the droplets at the interface. The role of interfacial roughness in promoting droplet nucleation is also addressed, together with the addition of heterogeneous nucleating agents. Considering all the body of information, we demonstrate that studying the overall kinetics of different droplet dispersions can contribute to the fundamental understanding of polymer nucleation., This work has received funding from the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST and the REPOL projects; these projects have received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreements No. 778092and No. 860221.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Unlocking Superior Properties in Polypropylene/Polyethylene Terephthalate (PP/PET) Blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

  • Coba Daza, Jorge Sebastián
  • Otaegi Tena, Itziar
  • Aramburu Ocáriz, Nora
  • Guerrica Echevarría Estanga, Gonzalo María
  • Irusta Maritxalar, María Lourdes
  • González Vives, Alba
  • Neubauer, Lena
  • Ramer, Georg
  • Lendl, Bernhard
  • Hubner, Gerhard
  • Cavallo, Dario
  • Tranchida, Davide Domenico
  • Müller Sánchez, Alejandro Jesús
The increasing global plastic production has created an urgent demand for energy-efficient processes to transform mixed plastic waste into value-added products via upcycling. Compatibilization of polypropylene (PP) and poly(ethylene terephthalate) (PET), two used semi-crystalline polymers in industry, is investigated in this study. We evaluate the effectiveness of an ethylene-butylene-acrylate terpolymer (PTW) at different contents in a 70/30 PP/PET blend, examining the resulting physico-chemical characteristics. Adding PTW as compatibilizer significantly reduces the droplet size in the PP/PET blend, improving rheological and mechanical properties. Remarkably, the blend containing 1.5 % PTW exhibits maximum enhancement in mechanical properties. To understand deeply the chemical compatibilization mechanism, Fourier transform infrared spectroscopy (FTIR-ATR), Atomic Force Microscopy combined with infrared spectroscopy (AFM-IR), and Proton Nuclear Magnetic Resonance Spectroscopy (1H NMR) techniques were employed. The compatibilizer was located at the interphase, and the chemical reaction using AFM-IR and 1H NMR was tracked. These advanced techniques prove the chemical compatibilization mechanism in PP/PET blends with PTW. These findings contribute to understanding the compatibilization processes, offering valuable guidance for developing efficient upcycling processes for mixed plastic waste., This work has received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No 860221 under the name of the REPOL project. The authors thank SGIker (UPV/EHU/ERDF, EU) for the technical and human support and the funding from the Basque Government through grant IT1503-22. The authors would also like to thank Walter Schaffer, Helmut Rinnerthaler, and Mahdi Abbasi from Borealis for sharing their expertise in polyolefin characterization. GR and BL acknowledge financial support through the COMET Centre CHASE, funded within the COMET Competence Centers for Excellent Technologies program by the BMK, the BMDW, and the Federal Provinces of Upper Austria and Vienna. The Austrian Research Promotion Agency (FFG) manages the COMET program. GR and LN acknowledge funding from the European Union's Horizon 2020 research and innovation program under Grant no. 953234 (Tumor-LN-oC), and GR acknowledges financial support under Grant no. 8619858 (PeroCUBE).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Temperature modulated DSC for composition analysis of recycled polyolefin blends

  • Scoppio, Andromeda
  • Cavallo, Dario
  • Müller Sánchez, Alejandro Jesús
  • Tranchida, Davide
Post-consumer plastic waste contains blends of numerous types of polyethylene (PE) and isotactic polypropylene (i-PP), whose recycling is challenging due to the complexity of this waste stream. A comprehensive knowledge of the composition of these recyclates is essential to understand the structure-property relationship of these systems and therefore upcycle them for high-value applications. To this aim, we used Temperature Modulated DSC (TMDSC) to develop a quantitative method to evaluate PE and Low-density PE (LDPE) content in recycled polyolefin blends. TM-DSC was carried out on 29 virgin PE materials, spanning densities between 960 and 862 kg/m3, characterizing a wide range of PE microstructures. Moreover, several PE/i-PP model blends were prepared by selecting LDPE, High-density PE (HDPE) and Linear Low-density PE (LLDPE) materials to blend them with i-PP of three types: homopolymer (PP-H), block copolymer (PP-B) and random copolymer (PP-R), mimicking the composition of real recyclates. Results from the TM-DSC analysis of these blends allowed us to establish methods for quantifying the amount of overall PE content and also the LDPE fraction within recyclates. The developed methods were applied to real post-consumer recycled grades, and results were compared with the ones obtained from Cross-Fractionation Chromatography (CFC) analysis and Nuclear Magnetic Resonance (NMR) spectroscopy, displaying good agreement between the latter and the TM-DSC method., We acknowledge the financial support from the REPOL project; this project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 860221. The authors wish to thank Tamara Carmeli and all the Thermal Analysis group for the help with the TM-DSC measurements, Karin Kemper for the help with procuring the materials, Andreas Albrecht for the CFC measurements, and Gerhard Hubner for the NMR measurements.