Pasar al contenido principal

SISTEMA INTEGRADO DE DESCARBONIZACION Y PRODUCCION DE ENERGIA BASADO EN PILAS DE COMBUSTIBLE DE METANOL DIRECTO PARA APLICACIONES NAVALES Y AEROESPACIALES

ENE2017-86711-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of chitin nanocrystals on the dielectric behaviour and conductivity of chitosan-based bionanocomposites

  • Salaberria, A.M.
  • Badia, J.D.
  • Fernandes, S.C.M.
  • Sáenz de Juano-Arbona, V.
  • Labidi, J.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A series of bionanocomposite films based on chitosan, reinforced with chitin nanocrystals, were developed, and assessed in terms of dielectric behaviour and conductivity by using an experimental methodology that allows avoiding the conductivity contribution and the exclusion of contact and interfacial polarization effects. The dielectric relaxations at low and high frequency and temperatures were modeled by Havriliak-Negami functions. Below the glass transition temperature (Tg), the gamma and beta relaxations were observed, which were related to intramolecular and non-cooperative segmental movements. At higher temperatures, an intermolecular and cooperative macromolecular movement, related to the glass transition, gave rise to alpha-relaxation. In addition, two over-Tg p(I) and p(II) relaxations were found, which were related to the displacement of dipoles in the disordered structure of bionanocomposites. The addition of chitin nanocrystals did not affect the apparent activation energy Ea of the gamma-relaxation. However, it decreased the Ea of the beta-relaxation and increased the free volume at temperatures in the vicinities of the alpha-relaxation. Finally, the electric conductivity of the bionanocomposites was lower than that of neat chitosan and chitin due to the interaction between the-OH and-NH2 groups that reduced the ionic mobility, along with the increase of free volume, with the subsequent separation of phases., The European Regional Development Funds and the Spanish Ministry of Science and Innovation for the concession of Research Projects ENE2014-53734-C2-1-R, UPOV13-3E-1947 and ENE2017-86711-C3-1-R are appreciated. Generalitat Valenciana is acknowledged for the project APOSTD14/041 for JD Badia and GRISOLIA/2002/003 for R. Teruel-Juanes. The authors are thankful for the financial support from the Department of Education of the Basque Government (IT1008-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of substrate and temperature on the biodegradation of polyester-based materials: Polylactide and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) as model cases

  • Gil-Castell, O.
  • Andres-Puche, R.
  • Dominguez, E.
  • Verdejo, E.
  • Monreal Mengual, Llucía|||0000-0001-5355-7564
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The extended use of polymers from renewable resources such as aliphatic polyesters or polyhydroxyalkanoates boosted the necessity to understand their behaviour in an end-of-life scenario. Although they can be degraded in reasonable shorter times than traditional polymers, understanding the degradation mechanisms under dissimilar conditions will contribute to further developments in this field. This work aimed to study the effect of temperature and substrate in the degradation of polylactide (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) in a simulated laboratory scale to ascertain their contribution, separately or in combination. For this purpose, nine parallel degradation assays were performed by means of the combination of mesophilic (25 °C), thermophilic (58 °C) and hyperthermophilic (80 °C) temperatures with enriched synthetic medium, compost and standardised soil substrates. Although the analysis of the surface morphology, the thermal properties and the thermo-oxidative stability revealed changes as a function of time, the evaluation of the molar mass allowed for a more precise determination of the degradation. In general, chain scission was perceived in all cases as a function of time. The effect of temperature was critical, significantly more important than the effect of the substrate, which showed a less significant contribution, especially in terms of molar mass reduction. While for the PLA, biodegradation at 58 °C and thermal degradation at 80 °C resulted in similar consequences, for the PHBH the hyperthermophilic temperature of 80 °C was the most severe condition, regardless of the substrate. From a technological perspective, it may be highlighted that biodegradation at 58 °C may be the most cost-effective condition due to the lower energy supply required and the valuable contribution of the microorganisms., The authors would like to thank the support of the Spanish Ministry of Science, Innovation and Universities, for the POLYDECARBOCELL project (ENE2017-86711-C3-1-R) and the Chilean Economic Development Agency (CORFO) for the project 13CEI2-21839.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functionalised Poly(Vinyl Alcohol)/Graphene Oxide as Polymer Composite Electrolyte Membranes

  • Gil Castell, Óscar
  • Cerveró, R.
  • Badia, J. D.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Crosslinked poly(vinyl alcohol) (PVA) based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells (DEFC). The membranes were functionalised by means of the addition of graphene oxide (GO) and sulfonated graphene oxide (SGO) and crosslinked with sulfosuccinic acid (SSA). The chemical structure was corroborated and suitable thermal properties were found. Although the addition of GO and SGO slightly decreased the proton conductivity of the membranes, a significant reduction of the ethanol solution swelling and crossover was encountered, more relevant for those functionalised with SGO. In general, the composite membranes were stable under simulated service conditions. The addition of GO and SGO particles permitted to buffer the loss and almost retain similar proton conductivity than prior to immersion. These membranes are alternative polyelectrolytes, which overcome current concerns of actual commercial membranes such as the high cost or the crossover phenomenon., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF). The Spanish Ministry of Economy, Industry and Competitiveness, is thanked for the research project POLYDECARBOCELL (ENE2017-86711-C3-1-R). The Spanish Ministry of Education, Culture and Sports is thanked for the FPU grant for O. Gil-Castell (FPU13/01916).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric spectroscopy of novel thiol-ene/epoxy thermosets obtained from allyl-modified hyperbranched poly(ethyleneimine) and diglycidylether of bisphenol A

  • Badia, J.D.
  • Acebo, C.
  • Gil-Castell, O.
  • Serra, A.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Dielectric Thermal Analysis (DETA) of a series of new thermoset obtained by click chemistry was performed. The new thermosets were obtained by a dual-curing process consisting in a first photochemical thiol-ene, followed by a thermal thiol-epoxy starting from an allyl-terminated hyperbranched poly(ethyleneimine) (HBPEI) and different proportions of diglycidylether of bisphenol A (DGEBA) and the corresponding stoichiometric proportions of pentaerythritol tetrakis (3-mercaptopropionate, PETMP). The dielectric behaviour was obtained experimentally supressing the conductive effects. Two sub-Tg intramolecular non-cooperative gamma and beta relaxations and an intermolecular cooperative alpha-relaxation were detected. The gamma-relaxation was ascribed to the dipole orientation of the terminal thiol groups. Two gamma relaxations gamma(epo) and gamma(ene) were observed, according to the influence of the surroundings. Only thermosets with a content of flexible HBPEI/PETMP domains higher than a 50% w/w showed the gamma(ene) relaxation at lower temperatures and higher frequencies. The beta-relaxation was a non-Johari-Goldstein relaxation, ascribed to the dipole transfer of the linear -CH2-O-(C=O)-CH2-CH2- groups of the thiol constrained in the glassy state. The alpha-relaxation was ascribed to the long-term segmental movements of the thermosets, occurring during the transition from the glassy to the rubbery stage. A synergic effect of reducing the rigidity and compactness of the thermosets by the reduction of aromatic moieties of the DGEBA/PETMP units, and the increase of the flexibility induced by the addition of HBPEI/PETMP units affected the macromolecular movement of the thermosets., European Regional Development Funds and the Spanish Ministry of Science, Innovation and Universities for ENE2017-86711-C3-1-R, MAT2017-82849-C2-1-R, ENE2014-53734-C2-1-R, UPOV13-3E-1947 and projects. Ministry of Education for the FPU13/01916) for O. Gil-Castell. Generalitat de Catalunya for the 2017-SGR-77 project. Generalitat Valenciana for the APOSTD14/041 for JD Badia and GRISOLIA/2012/003 for R. Teruel-Juanes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

  • Badia, J. D.
  • Echegoyen, Y.
  • Lagarón, J. M.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The influence of the addition of graphene nanoplatelets (GNPs) on the intra/inter ¿ molecular segmental motions of poly(ethylene-co-vinyl alcohol) (EVOH) was assessed by means of dielectric thermal analysis (DETA). The relaxation spectra were studied in terms of the dielectric permittivity (¿¿) and the dielectric loss tangent (tan ¿) at wide ranges of frequency (from 10¿2 to 107 Hz) and temperature (from -150 to 140 °C). Two relaxation zones were disthinguished. Below the glass transition temperature (Tg), two ß-relaxations were observed, which are characteristic local modes of mobility of the EVOH side groups, and related to the influence of the different surroundings of ethylene or vinyl alcohol units. At higher temperatures, the dielectric ¿-relaxation in the vicinities of the glass transition of EVOH was determined. The thermal activation of the ß-relaxations was explained by an Arrhenius model, and showed activation energies (Ea) around 55 and 80 kJ·mol¿1. The ¿-relaxation was explained by the Vogel-Fulcher-Tammann-Hesse (VFTH) model. The study of the segmental dynamics showed an increase in the dynamic fragility parameters with the addition of GNPs. The permittivity was increased at preferential concentrations of GNPs. In particular, the addition of GNPs up to 0.5 wt% increased the dielectric permittivity of the electrospun EVOH/GNPs nanocomposite fibers, specially at low frequencies., The authors would like to thank the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation, and Universities (MICIU) for the concession of the Research Projects ENE2017-86711-C3-1-R and RTI2018-097249-B-C21. The UPV authors would also like to thank the Chilean Economic Development Agency (CORFO) the economic support in the frame of the project 13CEI2-21839. This research was also funded by the EU H2020 YPACK (773872) and USABLE (BBI-JTI-2018-836884) projects. Torres-Giner is a recipient of a Juan de la Cierva-Incorporación contract (IJCI-2016-29675) from MICIU. Universitat Politècnica de València is acknowledged for the post-doctoral aid for R. Teruel-Juanes, under the PAID-10-19 SUB.1 SP20190049 scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ageing and seasonal effects on amorphous silicon photovoltaic modules in a Mediterranean climate

  • Mateo, C.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Segui-Chilet, Salvador|||0000-0002-2927-6938
[EN] This contribution presents afield study in which the long-term behaviour of two a-Si photovoltaic plants is studied. Two grid-connected a-Si:H photovoltaic plants located in Valencia (Spain) have been monitored during their first eight years of operation under real outdoor conditions. A per-unit approachand an STC normalisation have been made to analyse and compare photovoltaic plants with differences in electrical characteristics. An averaging process of the filtered and normalised data produces a monthly averaged value that is used to evaluate the ageing and seasonal effects experienced by the two photovoltaic plants. An analysis of the variations in the per unit output power finds that a seasonal effect is superimposed on the long-term stabilisation process. The study concludes that the long-term average stabilisation factor is equal to 1,35% per year, with a seasonal effect that shows a sinusoidal variation with an average amplitude of the sinusoidal oscillation equal to 2,71% per year. An estimation of the energy yield is performed considering the different ageing approaches presented in the study. Using the factors obtained from the experimental values, the ageing and seasonal effects are modelized, and a linear and an exponential expression is proposed to fit the long-term behaviour of both a-Si photovoltaic plants. Results obtained with the statistical analysis are compared with the experimental data and it is found that the exponential behaviour matches the experimental values., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF), the Spanish Ministry of Economy, Industry and Competitiveness, for the research project POLYDECARBOCELL (ENE2017-86711-C3-1-R) and the Generalitat Valenciana, Spain (PROMETEO/2020/077).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of plasticization and reprocessing effects on the segmental cooperativity of polylactide by dielectric thermal spectroscopy

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Badia, J.D.
  • Múgica, A.
  • Addiego, Frédéric
  • Müller, Alejandro J.
[EN] In the present study, the dielectric properties of both neat and plasticized polylactide submitted to repeated extrusion and injection processes to simulate recycling were analysed. The dielectric relaxation spectrum, consisting of 13 and ? relaxation, revealed the relevance of both acryl-PEG based plasticization and thermomechanical degradation induced by repeated extrusion and grinding-injection reprocessing cycles on polylactide (PLA). The 13-relaxation has its origin in the intramolecular local motions of pendant groups of the PLA backbone, while the ?-relaxation is representative of the intermolecular large-scale segmental motions of the PLA backbone. The addition of acryl-PEG to PLA (pPLA) induced an increment in the apparent activation energies and temperatures of the 13-relaxation due to the different nature of the acryl-pendant group in pPLA. Moreover, the crystallization rate of pPLA was much faster compared to that of neat PLA, which hindered the movements of the acryl-pendant group, thus requiring more energy to orient the dipoles. The plasticizing effect of acryl-PEG effectively aids the large-scale motions associated to the glass transition, which are the origin of the ?-relaxation. The effect of reprocessing in PLA is less relevant than the addition of the acryl-PEG plasticizer, in terms of dielectric behaviour. With increasing the number of processing cycles, the crystallization rate of PLA gradually increased, but the permittivity was still much lower than that of pPLA, for which crystallinity remained constant. Nonetheless, for the case of the ?-relaxation of pPLA, the rearrangements produced by chain scission induced an enhancement of the thermal activation of the orientation of the dipoles but reduced the dynamic fragility and increased the embrittlement of pPLA after reprocessing. These differences found in the relaxation spectrum and the molecular dynamics in the environment of the glass transition for PLA and pPLA, together with the embrittlement of pPLA after reprocessing, is what will determine the final use of one or the other recycled polymer., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research project POLYDECARBOCELL (ENE201786711C31R) . The authors would also like to thank the economic support of the Chilean Economic Development Agency (CORFO) in the frame of the project 13CEI221839. The UPV/EHU team acknowledges funding from the Basque Government through grant IT130919.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal kinetics for the energy valorisation of polylactide/sisal biocomposites

  • Moliner, C.
  • Badia, J.D.
  • Bosio, B.
  • Arato, E.
  • Kittikorn, T.
  • Stromberg, E.
  • Ek, M.
  • Karlsson, S.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The thermal stability and decomposition kinetics of PLA/sisal biocomposites was discussed to evaluate the suitability of their use in energy recovery processes such as pyrolysis and combustion. The influence of the addition of sisal up to 30%wt, the presence of coupling agent, and the atmosphere of operation, i.e. inert or oxidative was discussed by means of multi-rate linear non-isothermal thermogravimetric experiments. All biocomposites showed a mean high heating value of 15 MJ/kg indicating their suitability for energy recovery processes. The thermal requirements of PLA/sisal decomposition were assessed in terms of onset decomposition temperature and apparent activation energy. A minimum of 240 degrees C and 174 kJ mol(-1) in inert environment and 225 degrees C and 190 kJ mol(-1) in oxidative environment ensured the feasibility of the reactions regardless the composition of the PLA/sisal biocomposites. The atmosphere of work lead to a greater amount of residue in case of pyrolysis reactions that would need further treatment whereas an oxidative atmosphere resulted in nearly zero final waste stream. The similar kinetics obtained for all samples regardless the amount of sisal or use of coupling agent eases the operability of energy facilities aimed of turning these biowastes into new fuels., The Spanish Ministry of Economy and Competitiveness and European Regional Development Funds are acknowledged for the projects ENE2014-53734-C2-1-R, ENE2017-86711-C3-1-R (UPOV13-3E-1947). Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia. The financial support given by the Prince of Songkla University and KTH Royal Institute of Technology is gratefully acknowledged. Rossella Acerbo and Emanuele Righi are gratefully acknowledged for their activity in the framework of their Bachelor Theses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailored electrospun nanofibrous polycaprolactone/gelatin scaffolds into an acid hydrolytic solvent system

  • Gil-Castell, O.
  • Badia, J.D.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Blended nanofibrous scaffolds based on polycaprolactone (PCL) and gelatin (Ge) were successfully prepared. A formic/acetic acid (1:1) mixture was used to dissolve PCL/Ge blends from 100/0 to 20/80 %wt in steps of 10 %wt. The hydrolysis of the PCL diluted in the formic/acetic acid mixture was considered as a method for tailoring the surface morphology and physicochemical features of the nanofibrous PCL/Ge scaffolds as a function of the dissolution time. The fibre diameter remained in the nanoscale range for all the studied scaffolds, which is crucial to mimic the extra-cellular matrix size. The reduction of the intrinsic viscosity, molar mass and hydrodynamic radius found for the PCL molecules as a function of the dissolution time, consequently diminished the entanglement capability of the polymeric chains. Subsequently, the fibre diameter decreased as dissolution time increased, for all the studied compositions. While the crystallinity of the scaffolds with high PCL content increased as a function of the dissolution time, the scaffolds with high percentage of Ge showed the lowest crystallinity degree, which was ascribed to the hindering effect of the Ge diffused among the PCL segments. The wettability increased as a function of the Ge content due to the high hydrophilic behaviour of these molecules. It also increased as a function of the dissolution time, due to the more hydroxyl groups available in PCL segments to interact with water molecules. As a whole, the physicochemical assessment of the electrospun scaffolds revealed an effective tailoring procedure to obtain functionalised PCL/Ge scaffolds with specific properties as a function of the dissolution time before electrospinning., The Spanish Ministry of Economy and Competitiveness is acknowledged for the projects POLYCELL (ENE2014-53734-C2-1-R), POLYDECARBOCELL (ENE2017-86711-C3-1-R) and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant of O. Gil-Castell (FPU13/01916). Generalitat Valenciana is thanked for the APOSTD/2014/041 for J.D. Badia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Triblock SEBS/DVB crosslinked and sulfonated membranes: fuel cell performance and conductivity

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, Carmen
  • Gil-Castell, O.
  • Primaz, Carmem
[EN] A set of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) membranes with 10 or 25 wt.% divinyl-benzene (DVB) as a crosslinking agent were prepared and validated. Physicochemical characterization revealed suitable hydrolytic and thermal stability of photo-crosslinked membranes containing 25%wt. DVB and post-sulfonated. These compositions were evaluated in H2/O2 single cells, and electrical and proton conductivities were furtherly assessed. The membranes with the milder post-sulfonation showed greater proton conductivity than those with excessive sulfonation. In terms of electrical conductivity, a universal power law was applied, and the values obtained were low enough for being used as polyelectrolytes. At the analyzed temperatures, the charge transport process follows a long-range pathway or vehicular model. Finally, fuel cell performance revealed the best behavior for the membrane with 25 wt.% DVB, photo-crosslinked during 30 min and mild sulfonated, with a promising power density of 526 mW·cm-2. Overall, the results obtained highlight the promising fuel cell performance of these cost-effective triblock copolymer-based membranes and indicate that higher sulfonation does not necessarily imply better power density., Ministerio de Economía, Industria y Competitividad, Gobierno de España, Grant/Award Number: ENE2017-86711-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Dendritic Side Groups on the Mobility of Modified Poly(epichlorohydrin) Copolymers

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Graf, R.
  • Reina, J. A.
  • Giamberini, M.
[EN] The macromolecular dynamics of dendronized copolymer membranes (PECHs), obtained by chemical modification of poly(epichlorohydrin) with the dendron 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy] benzoate, was investigated. In response to a thermal treatment during membrane preparation, these copolymers show an ability to change their shape, achieve orientation, and slightly crystallize, which was also observed by CP-MAS NMR, XRD, and DSC. The phenomenon was deeply analyzed by dielectric thermal analysis. The dielectric spectra show the influence of several factors such as the number of dendritic side groups, the orientation, their self-assembling dendrons, and the molecular mobility. The dielectric spectra present a sub-Tg dielectric relaxation, labelled as gamma, associated with the mobility of the benzyloxy substituent of the dendritic group. This mobility is not related to the percentage of these lateral chains but is somewhat hindered by the orientation of the dendritic groups. Unlike other less complex polymers, the crystallization was dismantled before the appearance of the glass transition (alpha(Tg)). Only after that, clearing transition (alpha(Clear)) can be observed. The PECHs were flexible and offered a high free volume, despite presenting a high degree of modifications. However, the molecular mobility is not independent in each phase and the self-assembling dendrons can be eventually fine-tuned according to the percentage of grafted groups., This research was funded by the Spanish Ministry of Science, Innovation and Universities, grant POLYDECARBOCELL (ENE2017-86711-C3-1-R, ENE2017-86711-C3-3-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crosslinked sulfonated poly(vinyl alcohol)/graphene oxide electrospun nanofibers as polyelectrolytes

  • Gil-Castell, O.
  • Galindo-Alfaro, Diana
  • Sanchez-Ballester, S.
  • David Badia, José
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Taking advantage of the high functionalization capacity of poly(vinyl alcohol) (PVA), bead-free homogeneous nanofibrous mats were produced. The addition of functional groups by means of grafting strategies such as the sulfonation and the addition of nanoparticles such as graphene oxide (GO) were considered to bring new features to PVA. Two series of sulfonated and nonsulfonated composite nanofibers, with different compositions of GO, were prepared by electrospinning. The use of sulfosuccinic acid (SSA) allowed crosslinked and functionalized mats with controlled size and morphology to be obtained. The functionalization of the main chain of the PVA and the determination of the optimum composition of GO were analyzed in terms of the nanofibrous morphology, the chemical structure, the thermal properties, and conductivity. The crosslinking and the sulfonation treatment decreased the average fiber diameter of the nanofibers, which were electrical insulators regardless of the composition. The addition of small amounts of GO contributed to the retention of humidity, which significantly increased the proton conductivity. Although the single sulfonation of the polymer matrix produced a decrease in the proton conductivity, the combination of the sulfonation, the crosslinking, and the addition of GO enhanced the proton conductivity. The proposed nanofibers can be considered as good candidates for being exploited as valuable components for ionic polyelectrolyte membranes., This research was funded by the MINISTERIO DE ECONOMIA, INDUSTRIA Y COMPETITIVIDAD, grant number ENE2017-86711-C3-1-R and by the MINISTERIO DE EDUCACION, CULTURA Y DEPORTE, grant number FPU13/01916.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance of sulfonated poly(vinyl alcohol)/graphene oxide polyelectrolytes for direct methanol fuel cells

  • Gil-Castell, Óscar
  • Santiago, Óscar
  • Navarro, Emilio
  • Leo, Teresa J.
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The use nanotechnology along with the consideration of a functionalization and stabilization approach to the poly(vinyl alcohol) (PVA) was considered useful for the preparation of cost-effective polyelectrolyte membranes. A set of nanocomposite and crosslinked membranes based in PVA/SSA/GO were prepared and analyzed as polyelectrolytes in direct methanol fuel cells (DMFCs). The crosslinking and sulfonation by the use of sulfosuccinic acid (SSA) enhanced the stability and increased the proton conducting sites in the PVA structure. The presence of graphene oxide (GO) augmented the stability, remarkably decreased the methanol crossover and enhanced power density curves. An optimum value for proton conductivity was found for the 0.50%wt of GO proportion, which decreased to higher concentrations of GO. Given the power density curve dependency on both the proton conductivity and the crossover reduction, the performance of these membranes as polyelectrolytes in DMFCs is strictly related to the balance between both factors. Therefore, a proportion of GO of 0.75%wt may assure suitable proton conductivity 3 mS·cm-1 and high resistance to methanol permeability, reaching promising power density of 16 mW·cm-2 with lower hydration levels., The Spanish Ministry of Economy, Industry, and Competitiveness is acknowledged for the projects ENE2017-86711-C3-1-R, ENE2017-86711-C3-2-R, ENE2017-90932-REDT, and UPOV13-3E-1947. The Spanish Ministry of Education, Culture, and Sports is thanked for the predoctoral FPU grant for O. Gil-Castell (grant no. FPU13/01916).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crosslinked chitosan/poly(vinyl alcohol)-based polyelectrolytes for proton exchange membranes

  • Gil-Castell, O.
  • Arenga, Francesca
  • Salaberria, A. M.
  • Baschetti, M.G.
  • Labidi, J.
  • Badia, J.D.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The preparation polyelectrolytes based on crosslinked poly(vinyl alcohol) (PVA) and chitosan (CS) was considered as a feasible alternative to develop highly functionalised, cost-effective and eco-friendly membranes for proton exchange fuel cell technologies. CS/PVA-based membranes were combined with sulfosuccinic acid (SSA) as crosslinking and sulfonating agent, and glycerol (GL) to promote flexibility and favour their manageability. The chemical structure, the thermo-oxidative behaviour, the ethanol uptake, the electric, the proton conductivity, and the performance in direct ethanol fuel cell (DEFC) were assessed. In general, all the CS/PVA-based polyelectrolytes showed a synergetic increase of thermo-oxidative stability, appropriate absorption and diffusion of ethanol and good proton conductivity, suitable for the typical service conditions of fuel cells. The GL in the membranes reacted with SSA, reduced the ethanol absorption, diffusion coefficient and proton conductivity, but acted as a plasticiser that increased the ductile manageability of the polyelectrolytes to be mounted on the membrane-electrode assembly (MEA). Higher presence of CS and higher the proportion of GL in the polyelectrolyte, improved the material performance in the DEFC. In particular, the crosslinked polyelectrolyte 40CS/PVA/SSA/20GLwith a 40 %wt. of CS referred to PVA, and a 20 %wt. of GL referred to CS, showed a suitable behaviour in the DEFC test, with a maximum value of power density of 746 mW·cm-2., The Spanish Ministry of Economy, Industry and Competitiveness is acknowledged for the projects ENE2017-86711-C3-1-R and UPOV13-3E-1947. The Spanish Ministry of Education, Culture and Sports is thanked for the pre-doctoral FPU grant for O. Gil-Castell (FPU13/01916)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric analysis of photocrosslinked and post-sulfonated styrene-ethylene-butylene-styrene block copolymer based membranes

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, C.
  • García, O.
[EN] A series of UV photocrosslinked and post-sulfonated membranes based on blends of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) and divinylbenzene (DVB) were considered for the preparation of electrolytes for proton exchange membrane fuel cell (PEMFC) applications. Macromolecular dynamics of SEBS and SEBS-DVB membranes below and above the Tg, were analysed using dielectric thermal analysis (DETA). A sub-Tg intramolecular non-cooperative dielectric relaxation and two main relaxations, corresponding to the glass transitions of ethylene-butylene (EB) and styrene (S) blocks, were identified in the dielectric relaxation spectrum. The photocrosslinking and post-sulfonation processes affect to the entire dielectric relaxation spectrum, the apparent activation energy and the fragilities of both styrene (S) and ethylene-butylene (EB) blocks. Understanding the restrictions on the segmental mobility at low and high scale caused by both photocrosslinking and subsequent sulfonation is basic to provide an approach to ionic diffusivities. A correlation between relaxations processes and the performance of these membranes in H2/O2 - PEM single cells allows to estimate the behaviour of these membranes and to reengineer them, depending on the modification of the desired cell performance., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research projects POLYDECARBOCELL (ENE2017-86711-C3-1-R), REPICOMES (ENE2017-90932-REDT) and UPV-(PAID -10-19) SUB-1 grant for R. Teruel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance of Polyester-Based Electrospun Scaffolds under In Vitro Hydrolytic Conditions: From Short-Term to Long-Term Applications

  • Gil-Castell, O.
  • Badia, José David
  • Bou, Jordi
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The evaluation of the performance of polyesters under in vitro physiologic conditions is essential to design sca olds with an adequate lifespan for a given application. In this line, the degradation-durability patterns of poly(lactide-co-glycolide) (PLGA), polydioxanone (PDO), polycaprolactone (PCL) and polyhydroxybutyrate (PHB) sca olds were monitored and compared giving, as a result, a basis for the specific design of sca olds from short-term to long-term applications. For this purpose, they were immersed in ultra-pure water and phosphate bu er solution (PBS) at 37 C. The sca olds for short-time applications were PLGA and PDO, in which the molar mass diminished down to 20% in a 20¿30 days lifespan. While PDO developed crystallinity that prevented the geometry of the fibres, those of PLGA coalesced and collapsed. The sca olds for long-term applications were PCL and PHB, in which the molar mass followed a progressive decrease, reaching values of 10% for PCL and almost 50% for PHB after 650 days of immersion. This resistant pattern was mainly ascribed to the stability of the crystalline domains of the fibres, in which the diameters remained almost una ected. From the perspective of an adequate balance between the durability and degradation, this study may serve technologists as a reference point to design polyester-based sca olds for biomedical applications., This research was funded by MINISTERIO DE ECONOMIA, INDUSTRIA Y COMPETITIVIDAD, grant number ENE2017-86711-C3-1-R and by the MINISTERIO DE EDUCACION, CULTURA Y DEPORTE, grant number FPU13/01916.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Thermal characterization of agro-industrial waste for its use in energy valorization processes

  • Primaz, Carmem Tatiane
  • Gil-Castell, O.
  • Badia, J.D.
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The aim of this work is to define, develop and evaluate a methodology for an improved and more sustainable management of waste, in particular, agricultural residues, turning them into a new source of energy and added-value products. Specific attention is paid to the use of cotton seed (CS) for energy generation. The recovery of energy was carried out through the pyrolysis of this biomass in a fixed bed reactor. An initial definition of the main physico-chemical and thermal properties of the feed was performed. The design and operational parameters of the reactor were set according to the characteristics of the biomass. The thermo-chemical process of pyrolysis was simulated in the first stage by multi-rate linear non-isothermal thermogravimetric (TGA) experiments using argon (Ar) as carrier gas. The thermogravimetric analysis is a widely used technique to assess the thermal stability and decomposition kinetics of biomass. From the kinetic analysis, valuable parameters related to the thermo-chemical process were obtained, such as the activation energy and the pre-exponential factor, both highly dependent on the temperature of reaction. Furthermore, the composition of the raw material was also provided by thermal studies, through the quantification of the different processes of mass loss observed during the heating process. The results were obtained from the TGA measurements, by applying a kinetic methodology based on the combination of the Friedman, Flynn¿Wall¿Ozawa, Kissinger¿Akahira¿Sunose iso-conversional methods and the use of Master Plots permitted to describe mathematically the thermochemical reactions. These results will help define the further use of CS as feedstock in energy recovery processes., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation and Universities, for the research projects, POLYDECARBOCELL (ENE2017-86711-C3-1-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular Mobility in Oriented and Unoriented Membranes Based on Poly[2-(Aziridin-1-yl)ethanol]

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Bogdanowicz, Krzysztof Artur
  • Badia, José D.
  • Sáenz de Juano-Arbona, Victor
  • Graf, Robert
  • Reina, José A.
  • Giamberini, Marta
[EN] Unoriented and oriented membranes based on dendronized polymers and copolymers obtained by chemical modification of poly[2-(aziridin-1-yl) ethanol] (PAZE) with the dendron 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy]benzoate were considered. DSC, XRD, CP-MAS NMR and DETA, contribute to characterize the tendency to crystallize, the molecular mobility of the benzyloxy substituent, the dendritic liquid crystalline group and the clearing transition. The orientation of the mesogenic chain somewhat hindered this molecular motion, especially in the full substituted PAZE. The fragility, free volume and thermal expansion coefficients of these membranes near the glass transition are related to the orientation and the addition of the dendritic groups. PAZE-based membranes combine both order and mobility on a supramolecular and macroscopic level, controlled by the dendritic group and the thermal orientation, and open the possibility of preparing membranes with proper channel mobility that promotes selective ionic transport., This research was funded by Spanish Ministry of Science, Innovation and Universities, grant POLYDECARBOCELL (ENE2017-86711-C3-1-R, ENE2017-86711-C3-3-R). The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF). Universitat Politècnica de València is acknowledged for the post-doctoral aid for R.T.-J., under the PAID-10-19 SUB.1 SP20190049 scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Estudio de membranas compuestas basadas en los biopolímeros quitosano y lignina

  • Acosta Sabater, Marta
[ES] El quitosano es uno de los biopolímeros más profundamente estudiados y ha sido objeto de investigación en diversos campos de aplicación en los últimos años, como en la industria, la agricultura, la alimentación y la salud. El quitosano es un derivado desacetilado de la quitina, que principalmente se obtiene a partir de las cáscaras de desecho de crustáceos, tras ser consumidos como alimentos. Este material ofrece grandes posibilidades debido a su estructura molecular, que contiene grupos funcionales hidroxilo, amino y amida que permiten la interacción con otros materiales y amplias capacidades de modificación. En ese sentido, la combinación con otros materiales de origen renovable podría ofrecer nuevas alternativas en el ámbito de los biopolímeros. La lignina, otro biopolímero ampliamente disponible en la naturaleza, posee una gran cantidad de grupos funcionales capaces de interaccionar con los del quitosano para dar como resultado un material compuesto. La lignina es un biopolímero reticulado de elevado peso molecular que forma parte de la estructura de los tejidos de soporte de plantas vasculares y que aporta rigidez a la planta. En este estudio se propone la preparación y caracterización de membranas basadas en quitosano y lignina como una alternativa sostenible, y de bajo coste. Para ello, se realizará una amplia revisión bibliográfica de estos materiales para, seguidamente, preparar y caracterizar el comportamiento de estas membranas con un contenido de lignina que variará de 0,25 a 1,00% en porcentaje en peso. La preparación de las membranas se realizará mediante la técnica de disolución-vertido. La caracterización estará basada en el estudio de su estructura química, morfología microscópica, propiedades térmicas y estabilidad térmica, así como en el comportamiento de estabilidad hidrotérmica en función de la composición de lignina. Asimismo, se determinará su conductividad eléctrica y protónica para sugerir posibles aplicaciones en el campo de los bio-envases inteligentes o electrolitos en pilas de combustible., [CA] El quitosà és un dels biopolímers més profundament estudiats i ha estat objecte de recerca en diversos camps d'aplicació en els últims anys, com en la indústria, l'agricultura, l'alimentació i la salut. El quitosà és un derivat desacetilat de la quitina, que principalment s'obté a partir de les closques de rebuig de crustacis, després de ser consumits com aliments. Aquest material ofereix grans possibilitats per la seua estructura molecular, que conté grups funcionals hidroxil, amino i amida que permeten la interacció amb altres materials i amples de modificació. En aquest sentit, la combinació amb altres materials d'origen renovable podria oferir noves alternatives en l'àmbit dels biopolímers. La lignina, un altre biopolímer àmpliament disponible en la naturalesa, posseeix una gran quantitat de grups funcionals capaços d'interaccionar amb els del quitosà per donar com a resultat un material compost. La lignina és un biopolímer reticulat d'elevat pes molecular que forma part de l'estructura dels teixits de suport de plantes vasculars i que aporta rigidesa a la planta. En aquest estudi es proposa la preparació i caracterització de membranes basades en quitosà i lignina com una alternativa sostenible, i de baix cost. Per a això, es realitzarà una àmplia revisió bibliogràfica d'aquests materials per, tot seguit, preparar i caracteritzar el comportament d'aquestes membranes amb un contingut de lignina que variarà de 0,25 a 1,00% en percentatge en pes. La preparació de les membranes es realitzarà mitjançant la tècnica de dissolució-abocament. La caracterització estarà basada en l'estudi de la seua estructura química, morfologia microscòpica, propietats tèrmiques i estabilitat tèrmica, així com en el comportament d'estabilitat hidrotèrmica en funció de la composició de lignina. Així mateix, es determinarà la seua conductivitat elèctrica i protònica per suggerir possibles aplicacions en el camp dels bio-envasos intel·ligents o electròlits en piles de combustible., [EN] Chitosan is one of the most thoroughly studied biopolymers and has been the subject of research in recent years in various fields of application, such as industry, agriculture, food and health. Chitosan is a deacetylated derivative of chitin, which is mainly obtained from the waste shells of crustaceans, once they have been consumed as food. This material offers great possibilities due to its molecular structure, which contains hydroxyl, amino and amide functional groups that allow interaction with other materials and extensive modification capabilities. In this sense, the combination with other renewable materials could offer new alternatives in the field of biopolymers. Lignin, another widely available biopolymer in nature, possesses a large number of functional groups capable of interacting with those of chitosan to result in a composite material. Lignin is a high molecular weight cross-linked biopolymer that is part of the structure of plant support vascular tissues that provides rigidity to the plant. This study proposes the preparation and characterization of membranes based on chitosan and lignin as a sustainable, low-cost alternative biocomposite. For this purpose, an extensive bibliographic review of these materials will be carried out. Subsequently, membranes will be prepared and characterized with a lignin content that will vary from 0.25 to 1.00 %wt. The preparation of the membranes will be carried out by means of the solvent-casting technique. The characterization will be based on the study of its chemical structure, microscopic morphology, thermal properties and thermal stability, as well as on the hydrothermal stability as a function of the lignin composition. Likewise, the electrical and proton conductivity of the membranes will be determined to suggest feasible applications in the field of smart bio-packaging or electrolytes in fuel cells.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun Poly(ethylene-co-vinyl alcohol)/Graphene Nanoplatelets Composites of Interest in Intelligent Food Packaging Applications

  • Torres-Giner, Sergio|||0000-0001-9071-9542
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Echegoyen, Y.
  • Badia, Jose D.
  • Lagaron Cabello, José María
[EN] Graphene nanoplatelets (GNPs) were synthetized from graphite powder and, thereafter, embedded in poly(ethylene-co-vinyl alcohol) (EVOH) fibers by electrospinning in the 0.1-2 wt.-% range. The morphological, chemical, and thermal characterization performed on the electrospun nanocomposite fibers mats revealed that the GNPs were efficiently dispersed and rolled along the EVOH fibrilar matrix up to contents of 0.5 wt.-%. Additionally, the dielectric behavior of the nanocomposite fibers was evaluated as a function of the frequency range and GNPs content. The obtained results indicated that their dielectric constant rapidly decreased with the frequency increase and only increased at low GNPs loadings while the nanocomposite fiber mats became electrically conductive, with the maximum at 0.5 wt.-% GNPs content. Finally, the electrospun mats were subjected to a thermal post-treatment and dark films with a high contact transparency were obtained, suggesting that the nanocomposites can be used either in a nonwoven fibers form or in a continuous film form. This study demonstrates the potential of electrospinning as a promising technology to produce GNPs-containing materials with high electrical conductivity that can be of potential interest in intelligent packaging applications as "smart" labels or tags., This research was funded by the European Regional Development Funds (ERDF) and Ministry of Science, Innovation, and Universities (MICIU) project numbers ENE2014-53734-C2-1-R, ENE2017-86711-C3-1-R, UPOV13-3E-1947, and AGL2015-63855-C2-1-R. S.T.-G. acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675). J.D.B. and R.T.-J. also thank Generalitat Valenciana (GV) for their projects APOSTD14/041 and GRISOLIA/2012/003, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun Poly(ethylene-co-vinyl alcohol)/Graphene Nanoplatelets Composites of Interest in Intelligent Food Packaging Applications

  • Torres-Giner, Sergio
  • Echegoyen Sanz, Yolanda
  • Teruel-Juanes, Roberto
  • Badía, José D.
  • Ribes-Greus, Amparo
  • Lagarón Cabello, José María
Graphene nanoplatelets (GNPs) were synthetized from graphite powder and, thereafter, embedded in poly(ethylene-co-vinyl alcohol) (EVOH) fibers by electrospinning in the 0.1–2 wt.-% range. The morphological, chemical, and thermal characterization performed on the electrospun nanocomposite fibers mats revealed that the GNPs were efficiently dispersed and rolled along the EVOH fibrilar matrix up to contents of 0.5 wt.-%. Additionally, the dielectric behavior of the nanocomposite fibers was evaluated as a function of the frequency range and GNPs content. The obtained results indicated that their dielectric constant rapidly decreased with the frequency increase and only increased at low GNPs loadings while the nanocomposite fiber mats became electrically conductive, with the maximum at 0.5 wt.-% GNPs content. Finally, the electrospun mats were subjected to a thermal post-treatment and dark films with a high contact transparency were obtained, suggesting that the nanocomposites can be used either in a nonwoven fibers form or in a continuous film form. This study demonstrates the potential of electrospinning as a promising technology to produce GNPs-containing materials with high electrical conductivity that can be of potential interest in intelligent packaging applications as “smart” labels or tags., This research was funded by the European Regional Development Funds (ERDF) and Ministry of Science, Innovation, and Universities (MICIU) project numbers ENE2014-53734-C2-1-R, ENE2017-86711-C3-1-R, UPOV13-3E-1947, and AGL2015-63855-C2-1-R. Acknowledgments: S.T.-G. acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675). J.D.B. and R.T.-J. also thank Generalitat Valenciana (GV) for their projects APOSTD14/041 and GRISOLIA/2012/003, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiblock copolymers of sulfonated PSU/PPSU Poly(ether sulfone)s as solid electrolytes for proton exchange membrane fuel cells

  • Ureña, Nieves
  • Pérez-Prior, M. T.
  • Río, Carmen del
  • Várez, A.
  • Sanchez, J. Y.
  • Iojoiu, C.
  • Levenfeld, Belén
Sulfonated multiblock copolymers composed of Polysulfone (PSU) and Polyphenylsulfone (PPSU) poly(ether sulfone) segments (SPSU/SPPSU) are synthesized for the first time by polycondensation in a “one-pot two-step synthesis” of commercial monomers, followed by sulfonation reaction with trimethylsilyl chlorosulfonate (TMSCS). Both segments are responsible for proton conductivity, although the PSU block has greater affinity to be sulfonated. Even though no microphase separation is detected, the resulting ionomers exhibit good mechanical properties due to the non-sulfonated blocks remaining and to the high molecular weights of the ionomers. The chemical structure is confirmed by H-NMR, F-NMR and FTIR analysis. The degree of sulfonation (0.93–1.58) is determined from the IEC values and H-NMR spectra. In situ through-plane proton conductivity measured on the MEAs is 34.1 mS cm at 70 °C. A maximum power density of 400 mW cm , a current density of 1100 mA cm and outstanding thermo-mechanical stability, these proton-conducting membranes can therefore be implemented in PEMFC., This work was supported by mobility grant of IAAB from Universidad Carlos III de Madrid and the Projects from the regional government [Comunidad de Madrid through MATERYENER3CM S2013/MIT-2753 and S2013/MAE-2975 PILCONAER along with European Social Fund (ESF)]. In addition, funds from the Spanish Government, MINECO [MAT2016-78362-C4-3R and ENE2017- 86711-C3-1-R] are gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Layered Lanthanide Sulfophosphonates and Their Proton Conduction Properties in Membrane Electrode Assemblies

  • Bazaga-García, Montse
  • Salcedo, I.R.
  • Colodrero, Rosario M. P.
  • Xanthopoulos, K.
  • Villemin, D.
  • Stock, N.
  • López-González, Mar
  • Río, Carmen del
  • Losilla, E. R.
  • Cabeza, A.
  • Demadis, K. D.
  • Olivera-Pastor, P.
Metal phosphonates containing acidic groups exhibit a wide range of proton conduction properties, which may enhance the performance of membrane electrode assemblies (MEAs). In this work, focus is placed on proton conduction properties of coordination polymers derived from the combination of lanthanide ions with a phosphonate derivative of taurine (2-[bis(phosphonomethyl)amino]ethanesulfonic acid, HSP). High-throughput hydrothermal screening (140 °C) was used to reach optimal synthesis conditions and access pure crystalline phases. Seven compounds with the composition Ln[H(OPCH)-NH-(CH)-SO]·2HO were isolated and characterized, which crystallize in two different structures, monoclinic m-LaHSP and orthorhombic o-LnHSP (Ln = Pr, Nd, Sm, Eu, Gd, and Tb), with unit cell volumes of ∼1200 and ∼2500 Å, respectively. Their crystal structures, solved ab initio from X-ray powder diffraction data, correspond to different layered frameworks depending on the Ln cation size. In the orthorhombic series, o-LnHSP, the sulfonate group is noncoordinated and points toward the interlayer space, while for m-LaHSP, both phosphonate and sulfonate groups coordinate to the Ln centers. As a consequence, different H-bonding networks and proton transfer pathways are generated. Proton conductivity measurements have been carried out between 25 and 80 °C at 70-95% relative humidity. The Sm derivative exhibits a conductivity of ∼1 × 10 S·cm and activation energy characteristic of a Grotthuss-type mechanism for proton transfer. Preliminary MEA assays indicate that these layered lanthanide sulfophosphonates assist in maintaining the proton conductivity of Nafion membranes at least up to 90 °C and perform satisfactorily in single proton-exchange membrane fuel cells., The work at UMA was funded by MAT2016-77648-R research grant (Spain) and by Junta de Andalucía through the P12- FQM-1656 research project. M.B.-G. thanks UMA Research Plan for financial support. The work at CSIC-Madrid was funded by PROTONCELL ENE2017-86711-C3-1-R and REPICOMES ENE2017-90932-REDT and MAT2016-81001- P. The work at UoC was supported by grants from the Research Committee of the University of Crete, ELKE (grant no. KA 10329).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hybrid membranes with improved methanol crossover for DMFCs applications

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric analysis of photocrosslinked and post-sulfonated styrene-ethylene-butylene-styrene block copolymer based membranes

  • Teruel-Juanes, Roberto
  • Pascual-Jose, B.
  • Río, Carmen del
  • García Ballesteros, Olga
  • Ribes-Greus, Amparo
A series of UV photocrosslinked and post-sulfonated membranes based on blends of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) and divinylbenzene (DVB) were considered for the preparation of electrolytes for proton exchange membrane fuel cell (PEMFC) applications. Macromolecular dynamics of SEBS and SEBS-DVB membranes below and above the T, were analysed using dielectric thermal analysis (DETA). A sub-Tg intramolecular non-cooperative dielectric relaxation and two main relaxations, corresponding to the glass transitions of ethylene-butylene (EB) and styrene (S) blocks, were identified in the dielectric relaxation spectrum. The photocrosslinking and post-sulfonation processes affect to the entire dielectric relaxation spectrum, the apparent activation energy and the fragilities of both styrene (S) and ethylene-butylene (EB) blocks. Understanding the restrictions on the segmental mobility at low and high scale caused by both photocrosslinking and subsequent sulfonation is basic to provide an approach to ionic diffusivities. A correlation between relaxations processes and the performance of these membranes in H/O – PEM single cells allows to estimate the behaviour of these membranes and to reengineer them, depending on the modification of the desired cell performance., The authors would like to thank the support of the European Union is through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry and Competitiveness, for the research projects POLYDECARBOCELL (ENE2017-86711-C3-1-R), REPICOMES (ENE2017-90932-REDT) and UPV- (PAID -10-19) SUB-1 grant for R. Teruel.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

40SiO2–40P2O5–20ZrO2 sol-gel infiltrated sSEBS membranes with improved methanol crossover and cell performance for direct methanol fuel cell applications

  • Santiago, O.
  • Mosa Ruiz, Jadra
  • Navarro, Elena
  • Chinarro Martín, Eva
  • Aparicio, Mario
  • Leo, T. J.
  • Del Río, C.
Membranes commonly used in direct methanol fuel cell (DMFC) are expensive and show a great permeability to methanol which reduces fuel utilization and leads to mixed potential at the cathode. In this work, sulfonated styrene-ethylene-butylene-styrene (sSEBS) modified membranes with zirconia silica phosphate sol-gel phase are developed and studied in order to evaluate their potential use in DMFC applications. The synthesized hybrid membranes and sSEBS are subjected to an exhaustive physicochemical characterization by liquid uptake, ion exchange capacity, atomic force microscopy, X-ray photoelectron spectroscopy and dynamic mechanical and thermogravimetric analyses. Likewise, the potential use of the prepared membranes in DMFC is evaluated by means of electrochemical characterizations in single cell, determining the limiting methanol crossover current densities, proton conductivities and DMFC performances. The hybrid membranes show lower water and methanol uptakes, higher stiffness, water retention capability, upper power density and lower methanol crossover than sSEBS and Nafion 112., The authors would like to acknowledge Comunidad de Madrid and European Social Fund (ESF) through the Project S2013/MAE-2975 PILCONAER. The Spanish Ministry of Economy, Industry and Competitiveness is also thanked for the Research Projects MINECO ENE2013-49111-C2-1-R, ENE2014-53734-C2-2-R, ENE2017-86711-C3-1-R, ENE2017-86711-C3-2-R and ENE2017-90932-REDT
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of graphene nanoplatelets on the dielectric permittivity and segmental motions of electrospun poly(ethylene-co-vinyl alcohol) nanofibers

  • Badia, J. D.
  • Teruel Juanes, R.
  • Echegoyen, Yolanda
  • Torres Giner, Sergio
  • Lagarón Cabello, José María
  • Ribes-Greus, Amparo
The influence of the addition of graphene nanoplatelets (GNPs) on the intra/inter – molecular segmental motions of poly(ethylene-co-vinyl alcohol) (EVOH) was assessed by means of dielectric thermal analysis (DETA). The relaxation spectra were studied in terms of the dielectric permittivity (ε′) and the dielectric loss tangent (tan δ) at wide ranges of frequency (from 10−2 to 107 Hz) and temperature (from -150 to 140 °C). Two relaxation zones were disthinguished. Below the glass transition temperature (Tg), two β-relaxations were observed, which are characteristic local modes of mobility of the EVOH side groups, and related to the influence of the different surroundings of ethylene or vinyl alcohol units. At higher temperatures, the dielectric α-relaxation in the vicinities of the glass transition of EVOH was determined. The thermal activation of the β-relaxations was explained by an Arrhenius model, and showed activation energies (Ea) around 55 and 80 kJ·mol−1. The α-relaxation was explained by the Vogel-Fulcher-Tammann-Hesse (VFTH) model. The study of the segmental dynamics showed an increase in the dynamic fragility parameters with the addition of GNPs. The permittivity was increased at preferential concentrations of GNPs. In particular, the addition of GNPs up to 0.5 wt% increased the dielectric permittivity of the electrospun EVOH/GNPs nanocomposite fibers, specially at low frequencies., The authors would like to thank the European Regional Development Funds (ERDF) and the Spanish Ministry of Science, Innovation, and Universities (MICIU) for the concession of the Research Projects ENE2017-86711-C3-1-R and RTI2018-097249-B-C21. The UPV authors would also like to thank the Chilean Economic Development Agency (CORFO) the economic support in the frame of the project 13CEI2-21839. This research was also funded by the EU H2020 YPACK (773872) and USABLE (BBI-JTI-2018-836884) projects. Torres-Giner is a recipient of a Juan de la Cierva—Incorporación contract (IJCI-2016-29675) from MICIU. Universitat Politècnica de València is acknowledged for the post-doctoral aid for R. Teruel-Juanes, under the PAID-10-19 SUB.1 SP20190049 scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triblock SEBS/DVB crosslinked and sulfonated membranes: Fuel cell performance and conductivity

  • Teruel-Juanes, Roberto
  • Río, Carmen del
  • Gil-Castell, O.
  • Primaz, C.
  • Ribes-Greus, Amparo
A set of styrene-ethylene-butylene-styrene triblock copolymer (SEBS) membranes with 10 or 25 wt% divinyl-benzene (DVB) as a crosslinking agent were prepared and validated. Physicochemical characterization revealed suitable hydrolytic and thermal stability of photo-crosslinked membranes containing 25 wt% DVB and post-sulfonated. These compositions were evaluated in H/O single cells, and electrical and proton conductivities were furtherly assessed. The membranes with the milder post-sulfonation showed greater proton conductivity than those with excessive sulfonation. In terms of electrical conductivity, a universal power law was applied, and the values obtained were low enough for being used as polyelectrolytes. At the analyzed temperatures, the charge transport process follows a long-range pathway or vehicular model. Finally, fuel cell performance revealed the best behavior for the membrane with 25 wt% DVB, photo-crosslinked during 30 min and mild sulfonated, with a promising power density of 526 mW·cm. Overall, the results obtained highlight the promising fuel cell performance of these cost-effective triblock copolymer-based membranes and indicate that higher sulfonation does not necessarily imply better power density., Ministerio de Economía, Industria y Competitividad, Gobierno de España, Grant/Award Number: ENE2017-86711-C3-1-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase Transformation Dynamics in Sulfate-Loaded Lanthanide Triphosphonates. Proton Conductivity and Application as Fillers in PEMFCs

  • Salcedo, I. R.
  • Colodrero, Rosario M. P.
  • Bazaga-García, M.
  • López-González, Mar
  • Río, Carmen del
  • Xanthopoulos, K.
  • Demadis, K. D.
  • Hix, Gary B.
  • Furasova, A. D.
  • Choquesillo-Lazarte, Duane
  • Olivera-Pastor, P.
  • Cabeza, A.
Phase transformation dynamics and proton conduction properties are reported for cationic layer-featured coordination polymers derived from the combination of lanthanide ions (Ln3+) with nitrilo-tris(methylenephosphonic acid) (H6NMP) in the presence of sulfate ions. Two families of materials are isolated and structurally characterized, i.e., [Ln2(H4NMP)2(H2O)4](HSO4)2·nH2O (Ln = Pr, Nd, Sm, Eu, Gd, Tb, Er, Yb; n = 4-5, Series I) and [Ln(H5NMP)]SO4·2H2O (Ln = Pr, Nd, Eu, Gd, Tb; Series II). Eu/Tb bimetallic solid solutions are also prepared for photoluminescence studies. Members of families I and II display high proton conductivity (10-3 and 10-2 S·cm-1 at 80 °C and 95% relative humidity) and are studied as fillers for Nafion-based composite membranes in PEMFCs, under operating conditions. Composite membranes exhibit higher power and current densities than the pristine Nafion membrane working in the range of 70-90 °C and 100% relative humidity and with similar proton conductivity., Financial support through the following projects is acknowl- edged: UMA authors for MAT2016-77648-R (MICINN/ FEDER); PID2019-110249RB-I00 (MICINN/FEDER) and Junta de Andalucía (FQM113); UoC authors for The Special Account of Research, Program INNOVAMAT KA 10694; D.C.L. for PGC2018-102047-B-I00 (MICINN/FEDER); M.L.G. for PGC2018-095364-B-I00 (MICINN/FEDER); C.R. for ENE2017-86711-C3-1-R and ENE2017-90932- REDT (MICINN/FEDER). A.D.F. for the Russian Science Foundation (Grant No. 19-79-10241)