Pasar al contenido principal

DESARROLLO, VALIDACION Y COMPORTAMIENTO EN SERVICIO DE POLIELECTROLITOS PARA PILAS DE COMBUSTIBLE Y ELECTROLIZADORES REVERSIBLES DE METANOL (POLYELMETH)

PID2020-116322RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric properties OF 40SiO(2)-40P(2)O(5)-20ZrO(2) /sulfonated styrene-ethylene-butylene-styrene hybrid membranes for proton exchange membrane fuel cells

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • del Río, C.
  • Mosa, J.
[EN] The dielectric spectra of a series of hybrid membranes prepared with sulfonated styrene-ethylene-butylenestyrene (sSEBS) as the polymeric matrix, and zirconia-modified phosphosilicate (40SiO2-40P2O5-20ZrO2), as inorganic filler through direct infiltration, was analysed. All the membranes displayed characteristic sSEBS spectra, consisting of three molecular relaxations: A non-cooperative (beta) relaxation and two cooperatives (alpha EB, alpha PS) ones ascribed to the glass transition of the ethylene-butylene and the polystyrene blocks, respectively. As a result of the infiltration of the inorganic component (40SiO2-40P2O5-20ZrO2), the dielectric spectra were considerably modified. Accordingly, the formation of dynamic crosslinking (M-O-M ' bonds, with M = P, Si, Zr) difficulties the motion of the alpha EB process, thus shifting it towards higher temperatures. Moreover, a significant plasticisation effect was found at high temperatures, which facilitates the activation of the alpha PS process. Furthermore, the decreasing values of the fragility parameter, due to the infiltration of the inorganic filler, revealed that all hybrid membranes displayed an arrangement of molecular chains and a strong behaviour. Thus, higher resistance to sudden temperature changes is expected. The optimum infiltration time (tau inf) is between 10 and 20 min since it provides acceptable values of electric permittivity, and the induced dynamic crosslinking brings the glass transitions of both blocks closer. Consequently, a complete characterisation of the molecular mobility by studying the spectrum of dielectric relaxations enables to fine-tune the membranes for an optimum design focused on its application in a proton exchange membrane fuel cell (PEMFC)., Acknowledgments The authors would like to thank the support of the Spanish Ministry of Science and Innovation for the research projects POLYELMETH (PID2020-116322RB-C31) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric properties of chitosan membranes cross-linked with glutaraldehyde or genipin

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, N.
  • Labidi, J.
[EN] This study investigates the impact of covalent cross-linking using glutaraldehyde (GA) and the biobased alternative genipin (GP) on the dielectric and conductive properties of chitosan membranes. For protonation, the solvent-casted membranes were immersed in a 1.0 M sulfuric acid solution (S). The resulting property changes were assessed using Fourier-Transform Infrared (FTIR) spectroscopy, water uptake studies, Differential Scanning Calorimetry (DSC), and Dielectric Thermal Analysis (DETA). The genipin-cross-linked membrane demonstrated higher water uptake than the glutaraldehyde-cross-linked one, attributed to less effective cross-linking and greater free volume between polymer chains. The membranes immersed in the sulfuric acid solution exhibited reduced water uptake and swelling due to a denser structure formed by short ionic bridges. All the chitosan-based materials showed dielectric spectra containing the same relaxation mechanisms (ß-, ßwet-, ¿-relaxation, and MWS polarisation). Covalent cross-linking and sulfuric acid immersion increased the activation energy of the ß-relaxation, due to the formation of strong bonds that limit the mobility of glycosidic linkages. The covalent bonds restrict the segmental dynamics of the chitosan backbone, leading to an increase in the Vogel temperature of the associated ¿-relaxation, particularly with glutaraldehyde. The ßwet-relaxation temperature decreased following sulfuric acid solution treatment, due to greater retention of bound water resulting from the incorporation of charged sulfate groups., The authors would like to thank the support of the Spanish Ministry of Science and Innovation for the research project POLYELMETH (PID2020-116322RB-C31), the Spanish Ministry of Universities for the pre-doctoral FPU grant of M.H. Wolf (FPU21/00853), and the Basque Government for the grant of N. Izaguirre (PIF19-183).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Charge transfer mechanisms in 40SiO2-40P2O5-20ZrO2 /sulfonated styrene-ethylene-butylene-styrene hybrid membranes for low temperature fuel cells

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • CARMEN DEL RIO
  • J.Mosa
[EN] A series of hybrid membranes synthetized via sol-gel chemistry and direct infiltration method have been pre-pared, consisting of sulfonated styrene-ethylene-butylene-styrene block copolymer (sSEBS), as polymeric matrix, and a zirconia modified phosphosilicate (40SiO2-40P2O5-20ZrO2) as inorganic component. The infiltration procedure has been carried out by immersion of sSEBS membranes in a 40SiO2-40P2O5-20ZrO2 sol solution for 5, 10, 20, and 40 min. The hybrid infiltrated membranes (sSEBS-Zr) have been thermally characterized to further investigate their suitability as electrolytes for low temperature fuel cells. TGA thermograms showed that sSEBS-Zr were more thermally stable than sSEBS. DSC thermograms showed that the addition of inorganic component decreases the Tg of the polystyrene block in hybrid membranes sSEBS-Zr. DETA showed significant differences in the charge transfer mechanisms between low and high temperature regions. The through-plane proton con-ductivity analysis showed that the sSEBS-Zr infiltrated 10 min had a better proton conductive capacity at 333K, thus showing that longer infiltration times might induce excessive M-O-M ' bonds, causing competition for the available proton sites. These results indicated that the proposed methodology shows good agreement with experimental performance data in hydrogen PEMFCs. Nonetheless, when DMFCs are considered, minimizing the permeability of methanol enhances more the performance than increasing the proton conductivity., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry, and Competitiveness for the research projects REPICOMES (ENE2017-90932-REDT) and POLY-ELMETH (PID2020-116322RB-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric Analysis of Blended Polysulfone/Polyethylenimine Membrane Contactors for CO2 Capture

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Zare, Alireza
  • Giamberini, Marta
  • Reina, José Antonio
[EN] Polysulfone membranes, used as contactors for CO2 capture, are blended with two different hyperbranched polyethyleneimines modified with benzoyl chloride (Additive 1) and phenyl isocyanate (Additive 2) in different percentages. Fourier-transformed infrared spectra evidence the presence of urea and amide groups, whereas the field emission scanning electron microscopy images show differences in the microstructure of the blended membranes. Dielectric spectra determine the motions of the side and backbone chains, which can facilitate the diffusion of CO2. The spectra consist of six dielectric processes; three of them are due to the polysulfone (gamma(PSf), beta(PSf), and alpha(PSf)), whereas the rest are characteristic of the additive (gamma(HPEI), beta(HPEI), and alpha(HPEI)). The benzoyl chloride and phenyl isocyanate functional groups introduce variations in molecular mobility and modify the relaxations associated with the hyperbranched polyethyleneimine (HPEI). The additives also increase the conductivity of the blended membranes, which can compromise the performance of the membranes, specifically in the case of Additive 1. Ion hopping is found to be the prevailing charge transport mechanism while both relaxations, alpha(HPEI) and alpha(PSf), are actives. These results, together with the final morphology of the membranes, may explain the greater absorption capacity of the membranes prepared with the hyperbranched polyethyleneimine modified with Additive 2., The authors would like to thank the support of the Spanish Ministry of Science and Innovation for the research project POLYELMETH (Grant Nos. PID2020-116322RB-C31 and PID2020-116322RB-C32).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of hemicellulose and lignin on the fibrillation efficiency and properties of cellulose nanofibrils from native and oxidized Eucalyptus nitens and Pinus radiata pulps

  • Albornoz-Palma, Gregory Piero Horacio|||0000-0002-1194-976X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Henríquez-Gallegos, Sergio
  • Ortega-Sanhueza, Isidora
  • Pereira, Miguel
[EN] Comprehending how raw materials, pretreatments, and treatments affect the properties of cellulose nanofibrils (CNFs) is crucial for their use. This study aims to understand the effect that alkaline treatment has on the characteristics of pulps, the mechanical processes of CNF production, and the characteristics of CNFs from Pinus radiata and Eucalyptus nitens pulps with native and oxidized lignin. For this purpose, Pinus radiata and Eucalyptus nitens pulps with different lignin contents produced by oxidative pretreatment were used as raw material. From these, pulps with different hemicellulose and lignin contents were produced by alkaline treatment. Furthermore, CNFs were prepared by refining and homogenization processes. The chemical composition analysis of pulps containing native lignin, before and after alkaline treatment, revealed distinct behaviors of hemicellulose. In Pinus radiata pulp, hemicellulose remained insoluble under alkaline conditions. In contrast, the hemicellulose from Eucalyptus nitens pulp was partially soluble. Morphological characteristics of CNFs revealed that removing 41.8% of total hemicellulose by alkaline treatment promoted the mechanical fibrillation of Eucalyptus nitens pulp with native lignin, decreasing the average width by 30%. Furthermore, a very low lignin content in this species (~ 1.3%) hindered the mechanical fibrillation of fibers. Finally, the dielectric spectra of CNFs showed that the alkaline treatment increased the activation energies of the relaxations associated with the molecular motions of the hemicellulose and lignin groups, evidencing changes in their structures. These changes were related to the deacetylation of hemicellulose, and the deprotonation of hydroxy groups and the formation of carboxyl groups in lignin., The experimental activities carried out at the Universitat Politecnica de Valencia have been funded by the Spanish Ministry of Science and Innovation for the research Project POLYELMETH (PID2020-116322RB-C31) and Grant PAID-01-22 SUB. The experimental activities carried out at the Universidad de Concepcion have been funded by the Agencia Nacional de Investigacion y Desarrollo (ANID) under Grant No. FB210015 (CENAMAD).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Poly(thiourethane) Covalent Adaptable Network through Broadband Dielectric Spectroscopy

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • De la Flor, S.
  • Serra, A.
[EN] The dielectric spectra of the poly(thiourethane) network, HDI-S3, have been analyzed to know the nature and the cooperativity of each of the six dielectric processes observed. At low temperatures, ¿1, ¿2, and ß dielectric relaxations were attributed to noncooperative local motions in the glassy state, in which apparent activation energies are 30, 36, and 60 kJ·mol¿1, respectively. At higher temperatures, three dielectric relaxations are observed (¿Tg, ¿*, ¿). The ¿Tg relaxation is attributed to the glass transition, and it is overlapped with the ¿* relaxation. The molecular origin of ¿* relaxation is associated with the bond exchange reaction. Finally, the ¿ relaxation is ascribed to the heterogeneity of the sample although its origin is uncertain. The DC conductivity (¿DC) is found to be an appropriate variable to analyze the bond exchange reaction. Accordingly, the HDI-S3 has a molecular exchange mechanism of dissociative nature., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF) and the Spanish Ministry of Science and Innovation for the research projects POLYELMETH (PID2020-116322RB-C31) and MCIN/AEI/10.13039/201100011033, which financed the PID2020/115102RB-C21 project, and the Generalitat de Catalunya for the 2017-SGR-77. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.11) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Membranes for Cation Transport Based on Dendronized Poly(epichlorohydrin-co-ethylene oxide). Part 1: The Effect of Dendron Amount and Column Orientation on Copolymer Mobility

  • Zare, Alireza
  • De la Flor, Silvia
  • Montané, Xavier
  • Reina, José Antonio
  • Giamberini, Marta
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] Dendronized polyethers give rise to columnar LC structures which can successfully act as cation transport materials. Therefore, we prepared two different materials, based on Poly(epichlorohydrin-co-ethylene oxide) (PECH-co-EO) grafted with methyl 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy] benzoate, containing 20% or 40% modified units, respectively. The obtained polymers were characterized by differential scanning calorimetry (DSC), X-ray diffraction and optical microscopy between crossed polars (POM) and compared to the unmodified PECH-co-EO. In order to reach efficient transport properties, homeotropically oriented membranes were prepared by a fine-tuned thermal annealing treatment and were subsequently investigated by dynamic mechanical thermal analysis (DMTA) and dielectric thermal analysis (DETA). We found that the presence of the dendrons induces a main chain partial crystallization of the polyether chain and coherently increases the polymer Tg. This effect is more evident in the oriented membranes. As for copolymer orientation upon annealing, the cooling rate and the annealing temperature were the most crucial factors. DMTA and DETA confirmed that grafting with the dendron strongly hinders copolymer motions, but did not show great differences between unoriented and oriented membranes, regardless of the amount of dendrons., This research was funded by Ministerio de Ciencia e Innovacion, grant number PID2020116322RB-C32, PID2020-116322RB-C31 and PID2020-115102RB-C21. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 713679 and from the Universitat Rovira i Virgili (URV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric Properties in Oriented and Unoriented Membranes Based on Poly(Epichlorohydrin-co-Ethylene Oxide) Copolymers: Part III

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Zare, Alireza
  • De la Flor, Silvia
  • Reina, José Antonio
  • Giamberini, M.
[EN] The dielectric spectra and conductivity properties of neat poly(epichlorohydrin-co-ethylene oxide)(PECH-co-EO) copolymer and two modified copolymers with a 20% or 40% of dendron 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy] benzoate units were analysed. A process of thermal orientation was applied to the copolymers to fine-tune the molecular motion of the side chains and determine their validity for cation transport materials. The study was conducted using Dielectric Thermal Analysis (DETA). The spectra of the modified unoriented and oriented copolymers consisted of five dielectric relaxations (delta, gamma, beta, alpha(Tg), and alpha(melting)). The analysis of the relaxations processes shows that as the grafting with the dendron units increases, both the lateral and main chains have a greater difficulty moving. The thermal orientation induces in the main chain partial crystallization, including the polyether segments, and modifies the cooperative motion of the main chain associated with the glass transition (alpha(Tg)). A deep analysis of the electrical loss modulus revealed that the degree of modification only modifies the temperature peak of each relaxation, and this effect is more perceived if the dendron unit content is higher (40%). The thermal orientation process seems equal to the spectra of CP20-O and CP40-O to the point that the degree of modification does not matter. Nevertheless, the fragility index denotes the differences in the molecular motion between both copolymers (40% and 20%) due to the thermal orientation. The study of the electric conductivity showed that the ideal long-range pathways were being altered by neither the thermal orientation process nor the addition of dendrimers. The analysis of the through-plane proton conductivity confirmed that the oriented copolymer with the highest concentration of dendrimers was the best performer and the most suitable copolymer for proton transport materials., This research was funded by Ministerio de Ciencia e Innovacion, grant number PID2020115102RB-C21, PID2020-116322RB-C31, PID2020-116322RB-C32. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 713679 and from the Universitat Rovira i Virgili(URV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of kraft and organosolv lignin on cross-linked poly(vinyl alcohol)/chitosan-based membranes for energy applications

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Robles-Jimarez, Hector Ruben
  • Labidi, J.
[EN] Poly(vinyl alcohol)/chitosan (PVA/CS) composite membranes containing 20 wt%CS glycerol were prepared by solvent casting and cross-linked with 30 wt%PVA sulfosuccinic acid (SSA) via hot pressing. This study investigates the combined effects of the addition of 5 wt%CS kraft lignin (KL) or organosolv lignin (OL) and thermal cross-linking conditions (110 degrees C for 2 h or 120 degrees C for 3 h, at 25 kg & centerdot;cm-2) on the physicochemical and ion transport properties of the membranes. Although lignin is more hydrophobic than the PVA/CS blend, the incorporation of KL or OL disrupts the hydrogen-bonding network, leading to a less cohesive polymer structure and increased water uptake. Nevertheless, when the membrane undergoes cross-linking, lignin particles actively participate in forming a compact network that favours SSA retention, leading to higher gel content and enhanced resistance to swelling, thermal decomposition, and proton-transport-induced degradation, particularly under more severe conditions. In particular, the systems containing KL exhibit greater consumption of hydroxyl groups during cross-linking and a higher incorporation of sulfonic acid groups, thereby enhancing proton diffusion and proton conductivity. These findings demonstrate that integrating lignin coupled with a controlled thermal cross-linking is an effective strategy for tailoring PVA/CS composites for energy-related applications., Ministerio de Universidades, FPU21/00853, Ministerio de Ciencia e Innovacion, PID2020-116322RB-C31
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modified polyethyleneimine as additive for enhanced direct air capture via membrane contactors

  • Zare, Alireza
  • Boukalfa, Ahmed Khatib
  • Nogalska, Adrianna
  • Puga, Alberto
  • Cerruti, Pierfrancesco
  • Giamberini, Marta
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] This paper reports the preparation and characterization of asymmetric membranes for direct air capture (DAC) in polysulfone membrane contactors. In the previous studies it was found that blending the polysulfone with modified Lupasol G20 improved the polysulfone membrane performance; however, the hydrophobicity and stability of the additive require improvement for the application in gas/liquid system. In order to achieve this objective, in the current study, Lupasol G20 was grafted with phenyl isocyanate via urea linkages in a solvent-free and eco-friendly method. Membranes with different amount of the additive were prepared by phase inversion and characterized by several techniques in terms of morphology, porosity, wettability, and stability in aqueous KOH solution. Finally, CO2 solubility and mass transfer coefficient were determined and correlated with membranes¿ performance in the direct air capture device. In general, it was found that the presence of the additive greatly improved the characteristics of the membranes in terms of CO2 capture efficiency and robustness, outperforming the results obtained previously. The best results for were obtained with 5% additive content reaching 0.18 [mol/m2s]., This work is part of Grants PID2020 116322RB-C32 and PID2020 116322RB-C31 funded by the Spanish Research State Agency (Agencia Estatal de Investigacion, AEI/10.13039/501100011033). A.P. thanks the Spanish Ministry of Science and Innovation, the Spanish Research State Agency, (MCIN/AEI/10.13039/501100011033) and the European Social Fund for a Ramon y Cajal contract (RYC2017 22849). This project has received funding from the European Union s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 713679 and from the Universitat Rovira i Virgili (URV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular Mobility in Oriented and Unoriented Membranes Based on Poly[2-(Aziridin-1-yl)ethanol]

  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Bogdanowicz, Krzysztof Artur
  • Badia, José D.
  • Sáenz de Juano-Arbona, Victor
  • Graf, Robert
  • Reina, José A.
  • Giamberini, Marta
[EN] Unoriented and oriented membranes based on dendronized polymers and copolymers obtained by chemical modification of poly[2-(aziridin-1-yl) ethanol] (PAZE) with the dendron 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy]benzoate were considered. DSC, XRD, CP-MAS NMR and DETA, contribute to characterize the tendency to crystallize, the molecular mobility of the benzyloxy substituent, the dendritic liquid crystalline group and the clearing transition. The orientation of the mesogenic chain somewhat hindered this molecular motion, especially in the full substituted PAZE. The fragility, free volume and thermal expansion coefficients of these membranes near the glass transition are related to the orientation and the addition of the dendritic groups. PAZE-based membranes combine both order and mobility on a supramolecular and macroscopic level, controlled by the dendritic group and the thermal orientation, and open the possibility of preparing membranes with proper channel mobility that promotes selective ionic transport., This research was funded by Spanish Ministry of Science, Innovation and Universities, grant POLYDECARBOCELL (ENE2017-86711-C3-1-R, ENE2017-86711-C3-3-R). The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF). Universitat Politècnica de València is acknowledged for the post-doctoral aid for R.T.-J., under the PAID-10-19 SUB.1 SP20190049 scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric Characterization of Protonated Chitosan-Lignin Biocomposite Membranes: Influence of Chitosan and Lignin Types

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, Nagore
  • Labidi, Jalel
[EN] Biobased chitosan-lignin composite membranes with tailored dielectric and conductive properties were developed using chitosan of high (CSH) and low (CSL) molecular weight and degree of deacetylation, combined with kraft (KL) and organosolv lignin (OL) as fillers. The membranes were protonated by immersion in 1.0 M sulfuric acid. CSH composites exhibit stronger ionic interactions with sulfate groups compared to CSL composites, resulting in a dense structure that hinders water absorption and increases fragility. Chitosan interactions with sulfuric acid and lignin restrict the mobility of dielectric relaxations, with KL having a more pronounced effect than OL due to its smaller size and higher phenolic OH content. The membranes act as electrical insulators, exhibiting electron conductivities ranging from 10-15 to 10-8 S/cm between -10 and 170 degrees C, and proton conductivities between 2.9 x 10-3 and 4.4 x 10-3 S/cm at 60 degrees C. These properties make them promising candidates for use as biobased electrolytes in fuel cell applications., The authors would like to thank the support of the Spanish Ministry of Science and Innovation for the research project POLYELMETH (PID2020-116322RB-C31), the Spanish Ministry of Universities for the predoctoral FPU grant (FPU21/00853), and the Basque Government for the grant (PIF19-183).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge transfer mechanisms in 40SiO2-40P2O5-20ZrO2 /sulfonated styrene-ethylene-butylene-styrene hybrid membranes for low temperature fuel cells

  • Pascual-Jose, B.
  • Del Río, C.
  • Mosa, J.
  • Ribes-Greus, Amparo
A series of hybrid membranes synthetized via sol-gel chemistry and direct infiltration method have been prepared, consisting of sulfonated styrene-ethylene-butylene-styrene block copolymer (sSEBS), as polymeric matrix, and a zirconia modified phosphosilicate (40SiO2¿40P2O5¿20ZrO2) as inorganic component. The infiltration procedure has been carried out by immersion of sSEBS membranes in a 40SiO2¿40P2O5¿20ZrO2 sol solution for 5, 10, 20, and 40 min. The hybrid infiltrated membranes (sSEBS-Zr) have been thermally characterized to further investigate their suitability as electrolytes for low temperature fuel cells. TGA thermograms showed that sSEBS-Zr were more thermally stable than sSEBS. DSC thermograms showed that the addition of inorganic component decreases the Tg of the polystyrene block in hybrid membranes sSEBS-Zr. DETA showed significant differences in the charge transfer mechanisms between low and high temperature regions. The through-plane proton conductivity analysis showed that the sSEBS-Zr infiltrated 10 min had a better proton conductive capacity at 333K, thus showing that longer infiltration times might induce excessive M-O-M¿ bonds, causing competition for the available proton sites. These results indicated that the proposed methodology shows good agreement with experimental performance data in hydrogen PEMFCs. Nonetheless, when DMFCs are considered, minimizing the permeability of methanol enhances more the performance than increasing the proton conductivity., The authors would like to thank the support of the European Union through the European Regional Development Funds (ERDF) and the Spanish Ministry of Economy, Industry, and Competitiveness for the research projects REPICOMES (ENE2017-90932-REDT) and POLY- ELMETH (PID2020-116322RB-C31).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric properties OF 40SiO2–40P2O5–20ZrO2 /sulfonated styrene-ethylene-butylene-styrene hybrid membranes for proton exchange membrane fuel cells

  • Pascual-Jose, B.
  • Del Río, C.
  • Mosa Ruiz, Jadra
  • Ribes-Greus, Amparo
The dielectric spectra of a series of hybrid membranes prepared with sulfonated styrene-ethylene-butylene-styrene (sSEBS) as the polymeric matrix, and zirconia-modified phosphosilicate (40SiO–40PO–20ZrO), as inorganic filler through direct infiltration, was analysed. All the membranes displayed characteristic sSEBS spectra, consisting of three molecular relaxations: A non-cooperative (β) relaxation and two cooperatives (α α) ones ascribed to the glass transition of the ethylene-butylene and the polystyrene blocks, respectively. As a result of the infiltration of the inorganic component (40SiO–40PO–20ZrO), the dielectric spectra were considerably modified. Accordingly, the formation of dynamic crosslinking (M-O-M′ bonds, with M = P, Si, Zr) difficulties the motion of the α process, thus shifting it towards higher temperatures. Moreover, a significant plasticisation effect was found at high temperatures, which facilitates the activation of the α process. Furthermore, the decreasing values of the fragility parameter, due to the infiltration of the inorganic filler, revealed that all hybrid membranes displayed an arrangement of molecular chains and a strong behaviour. Thus, higher resistance to sudden temperature changes is expected. The optimum infiltration time (τ) is between 10 and 20 min since it provides acceptable values of electric permittivity, and the induced dynamic crosslinking brings the glass transitions of both blocks closer. Consequently, a complete characterisation of the molecular mobility by studying the spectrum of dielectric relaxations enables to fine-tune the membranes for an optimum design focused on its application in a proton exchange membrane fuel cell (PEMFC)., The authors would like to thank the support of the Spanish Ministry of Science and Innovation for the research projects POLYELMETH (PID2020-116322RB-C31), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of the dielectric properties and the charge transfer mechanisms of hybrid organic-inorganic proton-exchange membranes based on sulfonated styrene-ethylene-butylene-styrene

  • Pascual-Jose, B.
  • Ausina-Soler, C.
  • Mosa Ruiz, Jadra
  • Río, Carmen del
  • Ribes-Greus, A.
A series of hybrid sulfonated styrene–ethylene–butylene–styrene (sSEBS) block copolymer membranes was prepared by blending sSEBS solutions with different weight fractions (10, 20, 30, and 40 wt%) of a mixture formulated with a 70/30 ratio of two silane monomers, 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-glycidoxypropyltrimethoxysilane (GPTMS), which was labelled as MPTMS-GPTMS (MG). The resulting membranes were systematically investigated to gain a deeper understanding of their thermal properties, molecular dynamics, and electrical and proton conductivity. FTIR analysis confirmed that incorporation of the hybrid precursor modified the sSEBS structure by increasing the number of SiOSi linkages, thereby generating stable proton-conducting pathways. DSC measurements further demonstrated the MG hybrid precursor's hydrophilic character, resulting in a decrease in the glass transition temperature. Dielectric Spectroscopy revealed four relaxation processes attributable to the EB and PS blocks. All the results indicate that the addition of MG promoted the introduction of sulfonic acid groups via oxidation of thiol groups, exerted a plasticising effect and thereby enhanced proton transport with decreased electrical conductivity. However, excessive MG loading was found to negatively affect molecular dynamics by reducing free volume, thereby reducing proton conductivity. Among the membranes studied, the composition containing 10–20 wt% MG exhibited the best balance of properties, achieving proton and electrical conductivity values suitable for practical application as polymer electrolytes in proton-exchange membrane fuel cells (PEMFCs)., The authors would like to thank the support of the Spanish Ministry of Science and Innovation and Comunidad de Madrid for the research projects POLYELMETH (PID2020-116322RB-C31) and SOLENER-CM (TEC-2024/ECO-31), respectively. The authors also thank Universitat Politècnica de València for the grant PAID-10-23 SUB.1., Peer reviewed