Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric properties of chitosan membranes cross-linked with glutaraldehyde or genipin

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, N.
  • Labidi, J.
[EN] This study investigates the impact of covalent cross-linking using glutaraldehyde (GA) and the biobased alternative genipin (GP) on the dielectric and conductive properties of chitosan membranes. For protonation, the solvent-casted membranes were immersed in a 1.0 M sulfuric acid solution (S). The resulting property changes were assessed using Fourier-Transform Infrared (FTIR) spectroscopy, water uptake studies, Differential Scanning Calorimetry (DSC), and Dielectric Thermal Analysis (DETA). The genipin-cross-linked membrane demonstrated higher water uptake than the glutaraldehyde-cross-linked one, attributed to less effective cross-linking and greater free volume between polymer chains. The membranes immersed in the sulfuric acid solution exhibited reduced water uptake and swelling due to a denser structure formed by short ionic bridges. All the chitosan-based materials showed dielectric spectra containing the same relaxation mechanisms (ß-, ßwet-, ¿-relaxation, and MWS polarisation). Covalent cross-linking and sulfuric acid immersion increased the activation energy of the ß-relaxation, due to the formation of strong bonds that limit the mobility of glycosidic linkages. The covalent bonds restrict the segmental dynamics of the chitosan backbone, leading to an increase in the Vogel temperature of the associated ¿-relaxation, particularly with glutaraldehyde. The ßwet-relaxation temperature decreased following sulfuric acid solution treatment, due to greater retention of bound water resulting from the incorporation of charged sulfate groups., The authors would like to thank the support of the Spanish Ministry of Science and Innovation for the research project POLYELMETH (PID2020-116322RB-C31), the Spanish Ministry of Universities for the pre-doctoral FPU grant of M.H. Wolf (FPU21/00853), and the Basque Government for the grant of N. Izaguirre (PIF19-183).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric characterisation of chitosan-based composite membranes containing fractionated kraft and organosolv lignin

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • B. Pascual-Jose|||0000-0001-7562-916X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, Nagore
  • Labidi, J.
[EN] Chitosan-based composite membranes with fractionated kraft and organosolv lignin were prepared by solvent casting. A small lignin fraction (1%) was added to the neat chitosan to obtain a good distribution. The influence of lignin extraction with ethyl acetate and consequently ethanol on the dielectric and conductive properties of the composites was investigated by dielectric thermal analysis (DETA). Overall, the chitosan-lignin composites exhibit three relaxation mechanisms (ß, ßwet, and ¿) and two conductivity phenomena (¿ and MWS). FTIR analysis showed that the composites with organosolv lignin fractions have fewer hydroxyl groups than those with kraft lignin, which decreases slightly further for both after ethanol extraction. The lignin fractions with lower molecular weight and higher OH content show stronger interactions with chitosan, due to hydrogen bonding. These interactions affect the thermal activation and cooperativity of the ß-, ßwet, and ¿-relaxation. Furthermore, the kraft lignin fractions with many polar groups are very compatible with the chitosan matrix, resulting in a more compact structure and higher fragility. The membranes CS OLEA and CS KLE have a lower electron conductivity and a higher proton conductivity. Thus, they have promising conductivity properties for fuel cell applications., This study forms part of the Advanced Materials programme and was supported by the Spanish Ministry of Science and Innovation with funding from the European Union NextGenerationEU (PRTR-C17.11) and by the Generalitat Valenciana as project INNOMAT-H2 (MFA/2022/041). The authors also thank the Spanish Ministry of Universities for the pre-doctoral FPU grant of M.H. Wolf (FPU21/00853), the Basque Government for the grant of N. Izaguirre (PIF19-183) and the Universitat Polit`ecnica de Val`encia for the PAID-10-19 SUB.1 grant of R.Teruel-Juanes (SP20190049). The authors are also grateful to Karel Beirnaert for experimental assistance in material characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Conductivity of Chitosan Composite Membranes With Fractionated Kraft and Organosolv Lignin

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, Nagore
  • Labidi, Jalel
[EN] Different bio-based chitosan composites containing kraft or organosolv lignin were subjected to successive solvent extractions (ethyl acetate followed by ethanol) and then modified by immersion in a sulfuric acid solution to obtain membranes with suitable conductive properties. The materials were characterized by Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), oxidative-stability testing, water-uptake measurements, electron and proton conductivity, and H₂/O₂ fuel-cell performance, enabling correlations between composite structure and properties. Sulfuric-acid treatment introduced sulfate groups that promote ionic interactions between polymer chains, improving resistance to radical oxidative degradation. The dry modified biocomposites exhibited very low electronic conductivity (10⁻¹⁴–10⁻¹⁰ S·cm⁻¹) over the −10 to 60 °C range, indicating potential as electrical insulators. Acid modification also disrupted crystallinity and increased hydrophilicity, leading to higher water uptake. Consequently, proton transport was enhanced, resulting in increased proton conductivity and higher power output in an H₂/O₂ fuel cell. Composites containing organosolv lignin fractions showed stronger affinity for sulfate groups and, accordingly, higher oxidative stability, greater water uptake, and improved proton conductivity compared with kraft-lignin-based composites., This work was supported by Ministerio de Ciencia, Innovación y Universidades, PRTR- C17.11. Conselleria d'Educació, Investigació, Cultura iEsport, MFA/2022/041. Ministerio de Ciencia, Innovación y Universidades, FPU21/00853. Eusko Jaurlaritza, PIF19-183
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric Characterization of Protonated Chitosan-Lignin Biocomposite Membranes: Influence of Chitosan and Lignin Types

  • Wolf, Mark Henning|||0000-0003-3033-6616
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • Izaguirre, Nagore
  • Labidi, Jalel
[EN] Biobased chitosan-lignin composite membranes with tailored dielectric and conductive properties were developed using chitosan of high (CSH) and low (CSL) molecular weight and degree of deacetylation, combined with kraft (KL) and organosolv lignin (OL) as fillers. The membranes were protonated by immersion in 1.0 M sulfuric acid. CSH composites exhibit stronger ionic interactions with sulfate groups compared to CSL composites, resulting in a dense structure that hinders water absorption and increases fragility. Chitosan interactions with sulfuric acid and lignin restrict the mobility of dielectric relaxations, with KL having a more pronounced effect than OL due to its smaller size and higher phenolic OH content. The membranes act as electrical insulators, exhibiting electron conductivities ranging from 10-15 to 10-8 S/cm between -10 and 170 degrees C, and proton conductivities between 2.9 x 10-3 and 4.4 x 10-3 S/cm at 60 degrees C. These properties make them promising candidates for use as biobased electrolytes in fuel cell applications., The authors would like to thank the support of the Spanish Ministry of Science and Innovation for the research project POLYELMETH (PID2020-116322RB-C31), the Spanish Ministry of Universities for the predoctoral FPU grant (FPU21/00853), and the Basque Government for the grant (PIF19-183).