Pasar al contenido principal

ANDAMIOS BIOHIBRIDOS ASOCIADOS CON APATITOS NANOCRISTALINOS Y COCRISTALES FARMACEUTICOS PARA INGENIERIA DE TEJIDOS

PGC2018-102047-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic and luminescent properties of isostructural 2d coordination polymers based on 2-pyrimidinecarboxylate and lanthanide ions

  • García-García, Amalia
  • Zabala-Lekuona, A.
  • Goñi-Cárdenas, A.
  • Cepeda, Javier
  • Seco, José M.
  • Salinas-Castillo, Alfonso
  • Choquesillo-Lazarte, Duane
  • Rodríguez-Diéguez, Antonio
A couple of isostructural coordination polymers with the general formula [Ln (pymca) (AcO) ] have been obtained from reactions between pyrimidine-2-carboxylate (pymca) ligand and rare-earth ions (Ln = Dy (1), Nd (2)). These two-dimensional compounds have been characterized and the crystal structures have been solved by single-crystal X-ray diffraction technique, resulting in layers along the bc plane based on pymca and acetate anions that act as bridging ligands between metal atoms. Given that pymca and acetate anions possess carboxylate and hetero-nitrogen groups, it is possible to build a coordination polymer whose metal centers have a nine coordination. Furthermore, static and dynamic magnetic measurements of compound 1 reveal the lack of single molecule-magnet (SMM) behavior in this system due to the following two effects: (i) the ligand field does not stabilize magnetic ground states well separated from excited states, and (ii) anisotropy axes are not collinear, according to results with Magellan software. On another level, luminescent properties of compounds 1 and 2 are attributed to singlet π-π* transitions centered on pymca ligand as corroborated by time-dependent density functional theory (TD-DFT) calculations., Financial support was given by Junta de Andalucía(FQM-394),Red Guipuzcoana de Ciencia, Tecnología e Innovación (OF218/2018), University of the Basque Country (GIU 17/13), Gobierno Vasco/Eusko Jaurlaritza (IT1005-16), and the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER, UE) (PGC2018-102052-A-C22, PGC2018-102052-B-C21, and PGC2018-102047-B-I00). The authors thank for technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). A.Z.-L. is grateful to the Government of the Basque Country for the predoctoral fellowship. The authors thank SGIker of UPV/EHU for technical and human support, and European funding (ERDF and ESF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoluminescence and in vitro cytotoxicity analysis in a novel mononuclear Zn(II) coordination compound based on bumetanide

  • García-García, Amalia
  • Echenique-Errandonea, Estitxu
  • Cepeda, Javier
  • Choquesillo-Lazarte, Duane
  • Seco, José M.
  • Salinas-Castillo, Alfonso
  • Sánchez-Moreno, Manuel
  • Méndez-Arriaga, José M.
  • Rodríguez-Diéguez, Antonio
A novel coordination compound based on Zn(II) and bumetanide (Hbum) of general formulae [Zn(bum)(HO)]·2HO has been synthesized and fully characterized by elemental analyses and single crystal X-ray diffraction. The results indicate that compound 1 possesses a monomeric structure in which the main intermolecular interactions stabilizing the structure are hydrogen bonds. Due to the fully filled d orbitals of Zn(II), this coordination compound could be an ideal candidate to show strong emission. That is the reason why, photoluminescence properties have been studied showing that this compound presents ligand derived emission ruled by ligand-centred π-π* electronic transitions. Additionally, because of the well-recognised therapeutic properties of bumetanide, antiparasitic efficacy against three leishmania spp. strains has been studied for the corresponding ligand and coordination compound., This work has been funded by Junta de Andalucía (FQM-394), the Spanish Ministry of Economy and Competitiveness (MCIU/AEI/FEDER, UE) (PGC2018-102052-A-C22, PGC2018-102052-B-C21 and PGC2018-102047-B-I00), Red Guipuzcoana de Ciencia, Tecnología e Innovación (OF188/2017), University of the Basque Country (GIU 17/13). E.E. is grateful to the Government of the Basque Country for the predoctoral fellowship. The authors thank for technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rational design of an unusual 2D-MOF based on Cu(i) and 4-hydroxypyrimidine-5-carbonitrile as linker with conductive capabilities: A theoretical approach based on high-pressure XRD

  • García-Valdivia, Antonio A.
  • Romero, Francisco J.
  • Cepeda, Javier
  • Morales, Diego P.
  • Casati, Nicola
  • Mota, A. J.
  • Zotti, Linda A.
  • Palacios, Juan J.
  • Choquesillo-Lazarte, Duane
  • Salmerón, Francisco J.
  • Rivadeneyra, A.
  • Rodríguez-Diéguez, Antonio
Herein, we present, for the first time, a 2D-MOF based on copper and 4-hydroxypyrimidine-5-carbonitrile as the linker. Each MOF layer is perfectly flat and neutral, as is the case for graphene. High pressure X-ray diffraction measurements reveal that this layered structure can be modulated between 3.01 to 2.78 Å interlayer separation, with an evident piezochromism and varying conductive properties. An analysis of the band structure indicates that this material is conductive along different directions depending on the application of pressure or H doping. These results pave the way for the development of novel layered materials with tunable and efficient properties for pressure-based sensors. This journal is, This work has been supported by the European Union (Grant Agreement No. 604391 Graphene Flagship), the Swiss National Science Foundation (200020_162861), the Spanish MICINN (CEX2018-000805-M and projects CTQ2015-69163-CO2-R1, PGC2018-102052-B-C21, PGC2018-102052-A-C22, PGC2018-102047-B-I00, FIS2016-80434-P and PID2019-109539GB-C43), Junta de Andalućıa (FQM-394), and Comunidad Autónoma de Madrid through the Nanomag COST-CM Program (No. S2018/NMT-4321). J. J. P. thanks the Fundación Ramón Areces (XVIII Concurso Nacional para la Adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia, 2016). LAZ acknowledges financial support from University of Seville through the VI PPIT-US program. W. P. was funded by the CNPq Fellowship Programme (Pós-doutorado júnior) under Grant No. 405107/2017-0. J. J. P. acknowledges the computer resources and assistance provided by the Centro de Computación Científica of the Universidad Autónoma de Madrid and the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2019-2-0007). Finally, we also thank the CSIRC-ALHAMBRA computing centre.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interconvertible Hydrochlorothiazide–Caffeine Multicomponent Pharmaceutical Materials: A Solvent Issue

  • Verdugo-Escamilla, Cristóbal
  • Alarcón-Payer, Carolina
  • Frontera, Antonio
  • Acebedo-Martínez, Francisco Javier
  • Domínguez, A.
  • Gómez-Morales, Jaime
  • Choquesillo-Lazarte, Duane
The design of new multicomponent pharmaceutical materials that involve different active pharmaceutical ingredients (APIs), e.g., drug-drug cocrystals, is a novel and interesting approach to address new therapeutic challenges. In this work, the hydrochlorothiazide-caffeine (HCT–CAF) codrug and its methanol solvate have been synthesized by mechanochemical methods and thoroughly characterized in the solid state by powder and single crystal X-ray diffraction, respectively, as well as differential scanning calorimetry, thermogravimetric analyses and infrared spectroscopy. In addition, solubility and stability studies have also been performed looking for improved physicochemical properties of the codrug. Interestingly, the two reported structures show great similarity, which allows conversion between them. The desolvated HCT–CAF cocrystal shows great stability at 24 h and an enhancement of solubility with respect to the reference HCT API. Furthermore, the contribution of intermolecular forces on the improved physicochemical properties was evaluated by computational methods showing strong and diverse H-bond and π–π stacking interactions., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia, Innovación y Universidades (MICIU) and co-funded with FEDER, UE, Project No. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE). A.F. thanks MICIU/AEI from SPAIN, project number CTQ2017-85821-R, FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strasseriolides A−D, A Family of Antiplasmodial Macrolides Isolated from the Fungus Strasseria geniculata CF-247251

  • Annang, Frederick
  • Pérez-Moreno, Guiomar
  • González-Menendez, Víctor
  • Lacret, Rodney
  • Pérez-Victoria, Ignacio
  • Martín, Jesús
  • Cantizani, Juan
  • Pedro, Nuria de
  • Choquesillo-Lazarte, Duane
  • Ruiz-Pérez, Luis Miguel
  • González-Pacanowska, Dolores
  • Genilloud, Olga
  • Vicente, Francisca
  • Reyes, Fernando
A novel family of four potent antimalarial macrolides, strasseriolides A−D (1−4), has been isolated from cultures of Strasseria geniculata CF-247251, a fungal strain obtained from plant tissues. The structures of these compounds, including their absolute configurations, were elucidated by HRMS, NMR spectroscopy, and X-ray single-crystal diffraction. The four compounds gave respective IC values of 9.810, 0.013, 0.123, and 0.128 μM against Plasmodium falciparum 3D7 parasites with no significant cytotoxicity against the HepG2 cell line., This work was funded by the European Commission FP7 Marie Curie Initial Training Network “ParaMet” [grant agreement 290080], the Instituto de Salud Carlos III-Subdirección General de Redes y Centros de Investigación Cooperativa-Red de Investigación Cooperativa en Enfermedades Tropicales (RICET: RD16/0027/0014, RD16/0027/0015, and RD12/0018/0005), and the Plan Nacional (SAF2016-79957-R). The polarimeter, HPLC, IR, NMR equipment, and plate reader used in this work were purchased via grants for scientific and technological infrastructures from the Ministerio de Ciencia e Innovación [Grants Nos. PCT-010000-2010-4 (NMR), INP-2011-0016-PCT-010000 ACT6 (polarimeter, HPLC, and IR), and PCT-01000-ACT7, 2011-13 (plate reader)]. D.Ch.-L. acknowledges funding by project No. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, Structural Features, and Hydrogen Adsorption Properties of Three New Flexible Sulfur-Containing Metal-Organic Frameworks

  • Montes-Andrés, Helena
  • Leo, Pedro
  • Orcajo, Gisela
  • Rodríguez-Diéguez, Antonio
  • Choquesillo-Lazarte, Duane
  • Martos, Carmen
  • Botas, Juan A.
  • Calleja, Guillermo
Three novel flexible sulfur-containing MOF materials named Co-URJC-5, Cu-URJC-6 and Zn-URJC-7, based on the 5,5′-thiodiisophthalic acid linker have been synthesized through solvothermal methods and characterized by different physicochemical techniques. Hydrogen adsorption analysis at room temperature reveals that these compounds display a gate-opening type adsorption mechanism at low pressures, attributed to the flexible nature of the H4TBTC ligand. This behavior is even more noticeable for Cu-URJC-6, since the layer arrangement by π-πstacking interactions between the aromatic layers could contribute to the flexibility of the structure. These results can be considered as a representative example to elucidate how MOF structures are built using flexible ligands and more significantly as a promising route for designing materials with selective gas sorption properties., This work has been supported by the Regional Government of Madrid (project ACES2030-CM, S2018/EMT-4319) and the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (projects PGC2018-099296-B-I00, PGC2018-102052-B-C21, PGC2018-102047-B-I00) and Helena Montes’ grant (FPI BES-2016-076433)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystallization, Luminescence and Cytocompatibility of Hexagonal Calcium Doped Terbium Phosphate Hydrate Nanoparticles

  • Gómez-Morales, Jaime
  • Fernández Penas, Raquel
  • Romero-Castillo, Ismael
  • Verdugo-Escamilla, Cristóbal
  • Choquesillo-Lazarte, Duane
  • D’Urso, Annarita
  • Prat, Maria
  • Fernández-Sánchez, Jorge F.
© 2021 by the authors., Luminescent lanthanide-containing biocompatible nanosystems represent promising candidates as nanoplatforms for bioimaging applications. Herein, citrate-functionalized calcium-doped terbium phosphate hydrate nanophosphors of the rhabdophane type were prepared at different synthesis times and different Ca2+/Tb3+ ratios by a bioinspired crystallization method consisting of thermal decomplexing of Ca2+/Tb3+/citrate/phosphate/carbonate solutions. Nanoparticles were characterized by XRD, TEM, SEM, HR-TEM, FTIR, Raman, Thermogravimetry, inductively coupled plasma spectroscopy, thermoanalysis, dynamic light scattering, electrophoretic mobility, and fluorescence spectroscopy. They displayed ill-defined isometric morphologies with sizes ≤50 nm, hydration number n ~ 0.9, tailored Ca2+ content (0.42–8.11 wt%), and long luminescent lifetimes (800–2600 µs). Their relative luminescence intensities in solid state are neither affected by Ca2+, citrate content, nor by maturation time for Ca2+ doping concentration in solution below 0.07 M Ca2+. Only at this doping concentration does the maturation time strongly affect this property, decreasing it. In aqueous suspensions, neither pH nor ionic strength nor temperature affect their luminescence properties. All the nanoparticles displayed high cytocompatibility on two human carcinoma cell lines and cell viability correlated positively with the amount of doping Ca2+. Thus, these nanocrystals represent promising new luminescent nanoprobes for potential biomedical applications and, if coupled with targeting and therapeutic moieties, they could be effective tools for theranostics., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia, Innovación y Universidades (MICIU) and co-funded with FEDER, UE, Project No. PGC2018- 102047-B-I00 (MCIU/AEI/FEDER, UE). J.F.F.-S. acknowledges the Spanish Ministerio de Economía y Competitividad Project No. CTQ2017-88079-P for support. M.P. acknowledges the Progetto di Ricerca Fondi di Ateneo per la Ricerca—FAR 2017 “Development of innovative biological materials for the functional regeneration of cardiac tissue models”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization and comparison of statistical tools for the prediction of multicomponent forms of a molecule: The antiretroviral nevirapine as a case study

  • Nunes Costa, R
  • Choquesillo-Lazarte, Duane
  • Cuffini, Silvia L.
  • Pidcock, Elna
  • Infantes, Lourdes
15 pags., 6 figs., 4 tabs., In the pharmaceutical area, to obtain structures with desired properties, one can design and perform a screening of multicomponent forms of a drug. However, there is an infinite number of molecules that can be used as co-formers. Aiming to avoid spending time and money in failed experiments, scientists are always trying to optimize the selection of co-formers with high probability to co-crystallize with the drug. Here, the authors propose the use of statistical tools from the Cambridge Crystallographic Data Centre (CCDC) to select the co-formers to be used in a pharmaceutical screening of new crystal forms of the antiretroviral drug nevirapine (NVP). The H-bond propensity (HBP), coordination values (CV), and molecular complementarity (MC) tools were optimized for multicomponent analysis and a dataset of 450 molecules was ranked by a consensus ranking. The results were compared with CosmoQuick co-crystal prediction results and they were also compared to experimental data to validate the methodology. As a result of the experimental screening, three new co-crystals-NVP-benzoic acid, NVP-3-hydroxybenzoic acid, and NVP-gentisic acid-were achieved and the structures are reported. Since each tool assesses a different aspect of supramolecular chemistry, a consensus ranking can be considered a helpful strategy for selecting co-formers. At the same time, this type of work proves to be useful for understanding the target molecule and analyzing which tool may exhibit more significance in co-former selection., This work was conducted during scholarship supported by the Consejo Superior de Investigaciones Científicas (CSIC) (COOPA20094) and Red de Cristalografía y Cristalización “Factoría de Cristalización” (FIS2015-71928-REDC, MCIU). R. N. Costa would like to thank the support offered by CCDC during her stay in Cambridge as well as Richard Sykes for his support in the development of Python API scripts. This study was also financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES) – Finance Code 001. D. Ch.-L. acknowledges funding by project no. PGC2018-102047- B-I00 (MCIU/AEI/FEDER, UE). R. N. Costa thanks CAPES for the Ph.D. scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadening the scope of high structural dimensionality nanomaterials using pyridine-based curcuminoids

  • Rodríguez Cid, Laura
  • Qian, Wenjie
  • Iribarra Araya, Joseline
  • Etcheverry Berríos, Álvaro
  • Martínez Olmos, Eulalia
  • Choquesillo-Lazarte, Duane
  • Sañudo, Eva Carolina
  • Roubeau, Olivier
  • López Periago, Ana M.
  • González Campo, Arántzazu
  • Giner Planas, José
  • Soler, Mònica
  • Domingo Pascual, M. Concepción
  • Aliaga Alcalde, Nuria
We present a new heteroditopic ligand (3pyCCMoid) that contains the typical skeleton of a curcuminoid (CCMoid) decorated with two 3-pyridyl groups. The coordination of 3pyCCMoid with ZnII centres results in a set of novel coordination polymers (CPs) that display different architectures and dimensionalities (from 1D to 3D). Our work analyses how synthetic methods and slight changes in the reaction conditions affect the formation of the final materials. Great efforts have been devoted toward understanding the coordination entities that provide high dimensional systems, with emphasis on the characterization of 2D materials, including analyses of different types of substrates, stability and exfoliation in water. Here, we foresee the great use of CCMoids in the field of CPs and emphasize 3pyCCMoid as a new-born linker., This work has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 R&D programme (ERC-724981). We also acknowledge the Spanish Government, Ministerio de Ciencia e Innovación (projects CTQ2017-83632, CTQ2015-68370-P, PGC2018-098630-B-I00, MAT2016-77852-C2-1-R, CTQ2016-75150-R, PGC2018-098630-B-I00, PGC2018-102047-B-I00 and Ramon y Cajal grant RYC-2017-22910) and the Generalitat de Catalunya for the grant 2017SGR1277. The work at the University of Chile was supported by ANID, Fondecyt Regular Project 1201962 and 1161775 (M. S.). C. D., N. A.-A., A. L.-P., A. G.-C., and L. R.-C. acknowledge the financial support through the “Severo Ochoa” program for Centres of Excellence in R&D (SEV-2015-0496) under the FUNMAT-FIP-2016 fellowship. Some of the experiments were performed at the XALOC46 and NCD-SWEET beamlines of the ALBA synchrotron with the support of ALBA staff and at the Advanced Light Source (ALS) synchrotron. The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under contract no. DE-AC02-05CH11231. This work (L. R.-C.) has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two isostructural URJC-4 materials: From hydrogen physisorption to heterogeneous reductive amination through hydrogen molecule activation at low pressure

  • Montes-Andrés, Helena
  • Leo, Pedro
  • Muñoz, Antonio
  • Rodríguez-Diéguez, Antonio
  • Orcajo, Gisela
  • Choquesillo-Lazarte, Duane
  • Martos, Carmen
  • Martínez, Fernando
  • Botas, Juan A.
  • Calleja, Guillermo
Herein, two novel isostructural metal-organic frameworks (MOFs) M-URJC-4 (M = Co, Ni; URJC = "Universidad Rey Juan Carlos") with open metal sites, permanent microposity, and large surface areas and pore volumes have been developed. These novel MOFs, with polyhedral morphology, crystallize in the monoclinic P21/c space group, exhibiting a three-dimensional structure with microporous channels along the c axis. Initially, they were fully characterized and tested in hydrogen (H2) adsorption at different conditions of temperature and pressure. The physisorption capacities of both materials surpassed the gravimetric H2 uptake shown by most MOF materials under the same conditions. On the basis of the outstanding adsorption properties, the Ni-URJC-4 material was used as a catalyst in a one-pot reductive amination reaction using various carbonyl compounds and primary amines. A possible chemical pathway to obtain secondary amines was proposed via imine formation, and remarkable performances were accomplished. This work evidences the dual ability of M-URJC-4 materials to be used as a H2 adsorbent and a catalyst in reductive amination reactions, activating molecular H2 at low pressures for the reduction of C=N double bonds and providing reference structural features for the design of new versatile heterogeneous materials for industrial application., This work has been supported by the Regional Government of Madrid (Projects ACES2030-CM and S2018/EMT-4319), theSpanish Ministry of Science and Innovation, and the Spanish State Research Agency [Projects PGC2018-099296-B-I00,PGC2018-102052-B-C21, and PGC2018-102047-B-I00 andGrant FPI BES-2016-076433 (to H.M.-A.)].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interpenetrated luminescent metal–organic frameworks based on 1H-Indazole-5-carboxylic acid

  • Garcı́a-Valdivia, Antonio A.
  • Pérez-Mendoza, Manuel
  • Choquesillo-Lazarte, Duane
  • Cepeda, Javier
  • Fernández, Belén
  • Souto, Manuel
  • González-Tejero, Marcos
  • García, José A.
  • Mínguez Espallargas, Guillermo
  • Rodrı́guez-Diéguez, Antonio
Herein we report the formation and characterization of two novel Zn-based multifunctional metal–organic frameworks (MOFs) based on 1H-indazole-5-carboxylic acid and bipyridine-like linkers, synthesized by soft solvothermal routes. These materials possess isoreticular 2-fold interpenetrated three-dimensional structures that afford a flexible character and allow porosity modulation of the MOFs as confirmed by CO2 sorption measurements. Apart from this attractive structural feature, the MOFs exhibit fascinating luminescent properties involving both luminescence thermometry and long-lasting phosphorescence., Financial support was given by Junta de Andalucı́a (Spain)(Project Number FQM-394 and FQM-1484), Red Guipuzcoana de Ciencia, Tecnologı́a e Innovación (OF218/2018),University of the Basque Country (GIU 17/13), GobiernoVasco/Eusko Jaurlaritza (IT1005-16), the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER,UE) (PGC2018-102052-A-C22, PGC2018-102047-B-I00, CTQ2017-89528-P cofinanced by FEDER and Excellence Unit Marı́a de Maeztu MDM-2015-0538 granted to ICMol), the Generalitat Valenciana(PROMETEU/2019/066), and the European Union (ERC-2016-CoG 724681-S-CAGE). G.M.E. and M.S. thank MICINN for a Ramón y Cajal and a Juan de la Cierva-Formación fellowship, respectively. The authors thank thetechnical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self‐assembled type I collagen‐apatite fibers with varying mineralization extent and luminescent terbium promote Osteogenic Differentiation of Mesenchymal Stem Cells

  • Romero-Castillo, Ismael
  • López-Ruiz, Elena
  • Fernández Sánchez, Jorge Fernando
  • Marchal-Corrales, Juan Antonio
  • Gómez‐Morales, Jaime
[EN] This work explores in depth the simultaneous self‐assembly and mineralization of type I collagen by a base‐acid neutralization technique to prepare biomimetic collagen‐apatite fibrils with varying mineralization extent and doped with luminescent bactericidal Tb3+ ions. Two variants of the method are tested: base‐acid titration, a solution of Ca(OH)2 is added dropwise to a stirred solution containing type I collagen dispersed in H3PO4; and direct mixing, the Ca(OH)2 solution is added by fast dripping onto the acidic solution. Only the direct mixing variant yielded an effective control of calcium phosphate polymorphism. Luminescence spectroscopy reveals the long luminescence lifetime and high relative luminescence intensity of the Tb3+‐doped materials, while two‐photon confocal fluorescence microscopy shows the characteristic green fluorescence light when using excitation wavelength of 458 nm, which is not harmful to bone tissue. Cytotoxicity/viability tests reveal that direct mixing samples show higher cell proliferation than titration samples. Additionally, osteogenic differentiation essays show that all mineralized fibrils promote the osteogenic differentiation, but the effect is more pronounced when using samples prepared by direct mixing, and more notably when using the Tb3+‐doped mineralized fibrils. Based on these findings it is concluded that the new nanocomposite is an ideal candidate for bone regenerative therapy., This work was funded by the Ministerio de Ciencia, Innovación y Universidades, co‐funded by FEDER (Project Nos. PGC2018‐102047‐B‐I00 and RTC‐2016‐5451‐1) and by Fundación Mutua Madrileña (Project No. FMM‐AP17196‐2019). The authors also acknowledge technicians of VPSEM, TEM, and confocal microscopy of CIC of University of Granada for their valuable support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the architectures and luminescence properties of Cu(I) compounds of phenyl and carboranyl pyrazoles: the impact of 2D versus 3D aromatic moieties in the ligand backbone

  • Soldevila Sanmartín, Joan
  • Ruiz, Eliseo
  • Choquesillo-Lazarte, Duane
  • Light, Mark E.
  • Viñas, Clara
  • Teixidor, Francesc
  • Núñez Aguilera, Rosario
  • Pons, Josefina
  • Giner Planas, José
Incorporation of one or two o-carborane moieties at the backbone of the pyrazole ring was achieved by lithiation and nucleophilic addition onto the corresponding 3,5-dimethyl-1-(2-toluene-p-sulfonyloxyethyl)pyrazole. Two monosubstituted carboranyl pyrazoles (L2 and L3) and one disubstituted carboranyl pyrazole (L4) were synthesized and fully characterized. All new compounds, and the corresponding monosubstituted phenylderivative (L1) behave as N-type ligands upon coordination with CuI to afford different polynuclear Cu(I) compounds 1–4. Compounds 1–4 were fully characterized and their molecular structures were determined by X-ray diffraction. It is noteworthy that whereas the pyrazolylphenyl ligand L1, without o-carborane, provides a 1D coordination polymer (1), ligands containing carborane, L2–L3, affords 0D coordination compounds 2 and 3, and disubstituted carboranyl pyrazole ligand L4 gives rise to a 3D coordination polymer. The photoluminescence behaviour of compounds 1–4 has been investigated in the solid state and by TDDFT calculations for molecular compounds 2 and 3. Complex 2 exhibits blue emission with a maximum at 483 nm and a high fluorescence quantum yield of 66.5%. According to TDDFT calculations the emission occurs from LUMO to HOMO−1 and HOMO−2 and deexcitation could be described as cluster-centred excited state of d–s transition in origin. This result contradicts previous studies of scarce tri-coordinated rhombohedral Cu(I) clusters, where it was assumed the origin of their emissions is (X + M)LCT in nature by analogy with tetra-coordinated rhombohedral Cu(I) clusters. Complex 3 exhibits very weak emission (ΦF of 5%) in the green region with a maximum at 517 nm, which according to TDDFT is through a 3CC state. Calculations also show that, upon excitation, 3 suffers a notable distortion resulting in the total cleavage of the Cu4I4 framework. This cleavage could be the cause of the relatively large Stokes shift observed for 3. To the best of our knowledge, this is the first time that such behaviour is observed for this type of octahedral compounds. Additionally, the 1D polymer 1 exhibits weak fluorescence emission in the orange range with a maximum at 609 nm and a remarkable Stokes shift, whereas the 3D polymer 4 exhibits a similar emission to compound 2, with a moderate quantum yield (ΦF of 13.7%)., This work was financially supported by MICINN (PID2019-106832RB-I00, PGC2018-093863-B-C21), MICINN through the Severo Ochoa Program for Centers of Excellence for the FUNFUTURE (CEX2019-000917-S and MDM-2017-0767 projects) and the Generalitat de Catalunya (2017/SGR/1720 and SGR2017-1289). D. Ch.-L. acknowledges funding by project no. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE). J. Soldevila-Sanmartín is enrolled in the UAB PhD program and acknowledges the PIF pre-doctoral Fellowship from the UAB for his pre-doctoral grant (no. 19032/2). E. R. acknowledges computer resources, technical expertise and assistance provided by the CSUC. We thank Prof. D. Ruiz and Dr C. Roscini for the quantum yield measurements. The present publication is dedicated to Prof. Elena Shubina on the occasion of her 70th birthday., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dicopper(Ii)-edta chelate as a bicephalic receptor model for a synthetic adenine nucleoside

  • García-Rubiño, María Eugenia
  • Matilla-Hernández, A.
  • Frontera, Antonio
  • Lezama, Luis
  • Niclós-Gutiérrez, Juan
  • Choquesillo-Lazarte, Duane
In the extensive field of metal ions, their interactions with nucleic acids, and their constituents, the main aim of this work is to develop a metal chelate suitable to recognize two molecules of an adenine nucleoside. For this purpose, the dinuclear chelate Cu (µ-EDTA) (ethylenediaminetetraacetate(4-) ion (EDTA)) is chosen as a bicephalic receptor model for N9-(2-hydroxyethyl)adenine (9heade). A one-pot synthesis is reported to obtain the compound [Cu(µ-EDTA)(9heade)(HO)]·3HO, which has been characterized by single-crystal X-ray diffraction and various spectral, thermal, and magnetic methods. The complex unit is a centro-symmetric molecule, where each Cu (II) center is chelated by a half-EDTA, and is further surrounded by an N7-dentate 9heade nucleoside and two non-equivalent trans-O-aqua molecules. The metal chelate-nucleoside molecular recognition is referred to as an efficient cooperation between the Cu-N7(9heade) coordination bond and a (9heade)N6-H···O(carboxyl, EDTA) interligand interaction. Theoretical calculations are also made to account for the relevance of this interaction. The extreme weakness with which each water molecule binds to the metal center disturbs the thermal stability and the infrared (FT-IR) and electron spin resonance (ESR) spectra of the compound., This research was funded by Agencia Estatal de Investigación, Ministerio de Ciencia, Innovación y Universidades (MICIU) from Spain, and was co-funded by FEDER-EU (project nos. PGC2018-102047-B-I00 and CTQ2017-85821-R), Junta de Andalucía (research group FQM-283), and University of Granada (project ref. PPJIA2019-03).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Furosemide/non-steroidal anti-inflammatory drug–drug pharmaceutical solids: Novel opportunities in drug formulation

  • Acebedo-Martínez, Francisco Javier
  • Alarcón-Payer, Carolina
  • Rodríguez-Domingo, Lucía
  • Domínguez-Martín, Alicia
  • Gómez-Morales, Jaime
  • Choquesillo-Lazarte, Duane
The design of drug–drug multicomponent pharmaceutical solids is one the latest drug development approaches in the pharmaceutical industry. Its purpose is to modulate the physicochemical properties of active pharmaceutical ingredients (APIs), most of them already existing in the market, achieving improved bioavailability properties, especially on oral administration drugs. In this work, our efforts are focused on the mechanochemical synthesis and thorough solid-state characterization of two drug–drug cocrystals involving furosemide and two different non-steroidal anti-inflammatory drugs (NSAIDs) commonly prescribed together: ethenzamide and piroxicam. Besides powder and single crystal X-ray diffraction, infrared spectroscopy and thermal analysis, stability, and solubility tests were performed on the new solid materials. The aim of this work was evaluating the physicochemical properties of such APIs in the new formulation, which revealed a solubility improvement regarding the NSAIDs but not in furosemide. Further studies need to be carried out to evaluate the drug–drug interaction in the novel multicomponent solids, looking for potential novel therapeutic alternatives., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia, Innovación y Universidades (MICIU) and co-funded with FEDER, UE, Project No. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE) and Project No. B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vapour diffusion sitting drop method to induce nucleation of calcium phosphate on exfoliated graphene and graphene oxide flakes

  • Acebedo-Martínez, Francisco Javier
  • Fernández Penas, Raquel
  • Verdugo-Escamilla, Cristóbal
  • Choquesillo-Lazarte, Duane
  • Gómez-Morales, Jaime
The preparation of graphene/apatite and graphene oxide/apatite hybrid nanocomposites has recently attracted great attention in the biomaterial community. The sitting drop vapor diffusion technique has been assessed as a preparative method for such nanocomposites in this work. The technique has been employed to induce heterogeneous nucleation and growth of calcium phosphate in the presence of exfoliated graphene and commercial graphene oxide flakes, both labeled with LAlanine. Exfoliated multilayered graphene flakes were produced by sonication-assisted liquidphase exfoliation of graphite. In both composites, the apatite nanocrystals displayed similar size and shape, but different labile and B-type carbonation contributions. Graphene and graphene oxide flakes also influenced the carbonation degree of the apatite, which was almost half that measured for the apatite blank, as well as the aggregation state of their composites. In this regard, those composites with graphene oxide formed larger aggregates because of their wider size distribution, with a high-volume percentage of nanosheets (of about 4 nm length). Overall, the method is very useful to prepare small amounts of nanocomposite with high reproducibility., This research was funded by Spanish Research Agency of the Spanish Ministry of Science and Innovation, cofounded with FEDER (UE): “Bioscaffold project” grant number PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase Transformation Dynamics in Sulfate-Loaded Lanthanide Triphosphonates. Proton Conductivity and Application as Fillers in PEMFCs

  • Salcedo, I. R.
  • Colodrero, Rosario M. P.
  • Bazaga-García, M.
  • López-González, Mar
  • Río, Carmen del
  • Xanthopoulos, K.
  • Demadis, K. D.
  • Hix, Gary B.
  • Furasova, A. D.
  • Choquesillo-Lazarte, Duane
  • Olivera-Pastor, P.
  • Cabeza, A.
Phase transformation dynamics and proton conduction properties are reported for cationic layer-featured coordination polymers derived from the combination of lanthanide ions (Ln3+) with nitrilo-tris(methylenephosphonic acid) (H6NMP) in the presence of sulfate ions. Two families of materials are isolated and structurally characterized, i.e., [Ln2(H4NMP)2(H2O)4](HSO4)2·nH2O (Ln = Pr, Nd, Sm, Eu, Gd, Tb, Er, Yb; n = 4-5, Series I) and [Ln(H5NMP)]SO4·2H2O (Ln = Pr, Nd, Eu, Gd, Tb; Series II). Eu/Tb bimetallic solid solutions are also prepared for photoluminescence studies. Members of families I and II display high proton conductivity (10-3 and 10-2 S·cm-1 at 80 °C and 95% relative humidity) and are studied as fillers for Nafion-based composite membranes in PEMFCs, under operating conditions. Composite membranes exhibit higher power and current densities than the pristine Nafion membrane working in the range of 70-90 °C and 100% relative humidity and with similar proton conductivity., Financial support through the following projects is acknowl- edged: UMA authors for MAT2016-77648-R (MICINN/ FEDER); PID2019-110249RB-I00 (MICINN/FEDER) and Junta de Andalucía (FQM113); UoC authors for The Special Account of Research, Program INNOVAMAT KA 10694; D.C.L. for PGC2018-102047-B-I00 (MICINN/FEDER); M.L.G. for PGC2018-095364-B-I00 (MICINN/FEDER); C.R. for ENE2017-86711-C3-1-R and ENE2017-90932- REDT (MICINN/FEDER). A.D.F. for the Russian Science Foundation (Grant No. 19-79-10241)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Calcium and strontium coordination polymers as controlled delivery systems of the anti-osteoporosis drug risedronate and the augmenting effect of solubilizers

  • Vassaki, Maria
  • Kotoula, Christina
  • Turhanen, Petri
  • Choquesillo-Lazarte, Duane
  • Demadis, Konstantinos D.
Bisphosphonates (BPs) constitute a class of drugs used for the treatment of calcium-and bone-related disorders, including osteoporosis, Paget’s disease, etc. The presence of the anionic phosphonate groups endows them with the ability to act as ligands to metal ions. As a result, the synthesis of complexes or coordination polymers of various structural motifs can be accomplished. In this work, the 3rd generation BP drug risedronate (RIS) was combined with biologically acceptable alkaline earth metal ions (e.g., Ca and Sr) in an effort to synthesize new materials. These metal– RIS compounds can operate as controlled delivery systems (CDSs) when exposed to appropriate experimental conditions, such as the low pH of the human stomach. CDS networks containing Ca or Sr and RIS were physicochemically and structurally characterized and were evaluated for their ability to release the free RIS drug during an acid-driven hydrolysis process. Due to the low solubility of RIS at low pH, cationic additives (linear polyethyleneimine and amine-terminated polyaminoamide dendrimer) were utilized as drug solubilizers. Based on the drug release results of this study, there was an attempt to correlate the drug release efficiency with the structural features of these CDSs., The research work at UoC was supported by the Hellenic Foundation for Research and Innovation (HFRI) under the HFRI PhD Fellowship grant (Fellowship Number: 258) to M.V.D. Ch.-L.acknowledges funding by project no. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rational design of carborane-based Cu2-paddle wheel coordination polymers for increased hydrolytic stability

  • Li, Zhen
  • Choquesillo Lazarte, Duane
  • Fraile, Julio
  • Viñas, Clara
  • Teixidor, Francesc
  • Giner Planas, José
A new unsymmetric carborane-based dicarboxylic linker provided a 1D Cu2-paddle wheel coordination polymer (2) with much higher hydrolytic stability than the corresponding 2D Cu2-paddle wheel polymer (1), obtained from a related more symmetrical carborane-based linker. Both 1 and 2 were used as efficient heterogeneous catalysts for a model aza-Michael reaction but only 2 can be reused several times without significant degradation in catalytic activity., This work was financially supported by MICINN (PID2019-106832RB-I00), MICINN through the Severo Ochoa Program for Centers of Excellence for the FUNFUTURE (CEX2019-000917-S project) and the Generalitat de Catalunya (2017/SGR/1720). D. Ch.-L. acknowledges funding by project no. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE). Zhen Li is enrolled in the UAB PhD program and acknowledges the China Scholarship Council (CSC) for his PhD grant (201808310071)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel polymorphic cocrystals of the non-steroidal anti-inflammatory drug niflumic acid: Expanding the pharmaceutical landscape

  • Acebedo-Martínez, Francisco Javier
  • Alarcón-Payer, Carolina
  • Frontera, Antonio
  • Barbas, Rafael
  • Prohens, Rafel
  • Di Crisci, Milena
  • Domínguez-Martín, Alicia
  • Gómez-Morales, Jaime
  • Choquesillo-Lazarte, Duane
Any time the pharmaceutical industry develops a new drug, potential polymorphic events must be thoroughly described, because in a crystalline pharmaceutical solid, different arrangements of the same active pharmaceutical ingredient can yield to very different physicochemical properties that might be crucial for its efficacy, such as dissolution, solubility, or stability. Polymorphism in cocrystal formulation cannot be neglected, either. In this work, two different cocrystal polymorphs of the non-steroidal anti-inflammatory drug niflumic acid and caffeine are reported. They have been synthesized by mechanochemical methods and thoroughly characterized in solid-state by powder and single crystal X-ray diffraction respectively, as well as other techniques such as thermal analyses, infrared spectroscopy and computational methods. Both theoretical and experimental results are in agreement, confirming a conformational polymorphism. The polymorph NIF–CAF Form I exhibits improved solubility and dissolution rate compared to NIF–CAF Form II, although Form II is significantly more stable than Form I. The conditions needed to obtain these polymorphs and their transition have been carefully characterized, revealing an intricate system., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia, Innovación y Universidades (MICIU) and co-funded with FEDER, UE, project no. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE) and project B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain). AF thanks MCIU/AEI of Spain (project PID2020-115637GB-I00, FEDER, UE funds) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Furosemide/non-steroidal anti-inflammatory drug–drug pharmaceutical solids: Novel opportunities in drug formulation

  • Acebedo-Martínez, Francisco Javier
  • Alarcón-Payer, Carolina
  • Rodríguez-Domingo, Lucía
  • Domínguez-Martín, Alicia
  • Gómez-Morales, Jaime
  • Choquesillo-Lazarte, Duane
The design of drug–drug multicomponent pharmaceutical solids is one the latest drug development approaches in the pharmaceutical industry. Its purpose is to modulate the physicochemical properties of active pharmaceutical ingredients (APIs), most of them already existing in the market, achieving improved bioavailability properties, especially on oral administration drugs. In this work, our efforts are focused on the mechanochemical synthesis and thorough solid-state characterization of two drug–drug cocrystals involving furosemide and two different non-steroidal anti-inflammatory drugs (NSAIDs) commonly prescribed together: ethenzamide and piroxicam. Besides powder and single crystal X-ray diffraction, infrared spectroscopy and thermal analysis, stability, and solubility tests were performed on the new solid materials. The aim of this work was evaluating the physicochemical properties of such APIs in the new formulation, which revealed a solubility improvement regarding the NSAIDs but not in furosemide. Further studies need to be carried out to evaluate the drug–drug interaction in the novel multicomponent solids, looking for potential novel therapeutic alternatives., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia, Innovación y Universidades (MICIU) and co-funded with FEDER, UE, Project No. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE) and Project No. B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-Assembled type I collagen-apatite fibers with varying mineralization extent and luminescent terbium promote osteogenic differentiation of mesenchymal stem cells

  • Romero-Castillo, Ismael
  • López-Ruiz, Elena
  • Fernández-Sánchez, Jorge F.
  • Marchal-Corrales, Juan Antonio
  • Gómez-Morales, Jaime
This work explores in depth the simultaneous self¿assembly and mineralization of type I collagen by a base¿acid neutralization technique to prepare biomimetic collagen¿apatite fibrils with varying mineralization extent and doped with luminescent bactericidal Tb3+ ions. Two variants of the method are tested: base¿acid titration, a solution of Ca(OH)2 is added dropwise to a stirred solution containing type I collagen dispersed in H3PO4; and direct mixing, the Ca(OH)2 solution is added by fast dripping onto the acidic solution. Only the direct mixing variant yielded an effective control of calcium phosphate polymorphism. Luminescence spectroscopy reveals the long luminescence lifetime and high relative luminescence intensity of the Tb3+¿doped materials, while two¿photon confocal fluorescence microscopy shows the characteristic green fluorescence light when using excitation wavelength of 458 nm, which is not harmful to bone tissue. Cytotoxicity/viability tests reveal that direct mixing samples show higher cell proliferation than titration samples. Additionally, osteogenic differentiation essays show that all mineralized fibrils promote the osteogenic differentiation, but the effect is more pronounced when using samples prepared by direct mixing, and more notably when using the Tb3+¿doped mineralized fibrils. Based on these findings it is concluded that the new nanocomposite is an ideal candidate for bone regenerative therapy., This work was funded by the Ministerio de Ciencia, Innovación y Universidades, co‐funded by FEDER (Project Nos. PGC2018‐102047‐B‐I00 and RTC‐2016‐5451‐1) and by Fundación Mutua Madrileña (Project No. FMM‐AP17196‐2019). The authors also acknowledge technicians of VPSEM, TEM, and confocal microscopy of CIC of University of Granada for their valuable support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and surface studies of luminescent Ca/Eu phosphate nanomaterials: From the bulk to surface features

  • Ivanchenko, Pavlo
  • Escolano-Casado, Guillermo
  • Mino, Lorenzo
  • Dassi, Luca
  • Fernández-Sánchez, Jorge F.
  • Martra, Gianmario
  • Gómez-Morales, Jaime
Three luminescent Eu-containing phosphate materials (Ca-doped europium phosphate monohydrate, Eu-doped carbonated-apatite, and europium phosphate monohydrate) were prepared and analyzed on the level of bulk structure and surface properties and compared to the biomimetic non-luminescent counterpart hydroxyapatite. Europium-containing phosphate materials exhibited nanosized dimensions but different luminescence emissions and luminescence lifetimes depending on their crystalline structures (i.e., lanthanide phosphate or apatites) and chemical composition. The introduction of Eu in the crystal lattice leads to a notable decrease in the overall Lewis acidity of the surface cationic sites detected by CO probing. Further, the mixed Eu/Ca-containing materials surfaces were found to be very similar to the reference hydroxyapatite in terms of water adsorption energy, while the pure europium phosphate resulted to have the notably higher energy values of direct interaction of water molecules with the surface cations with no detected propagation of this effect towards water overlayers., This work was supported by projects PGC2018-102047-B-I00 (MCIN/AEI/FEDER, UE) (Spain) and PCI2020-112108 funded by MCIN/AEI/10.13039 /501100011033 (Spain) and the European Union "NextGenerationEU"/PRTR". PCI2020-112108 is part of the ERA-NET Cofund BlueBio Programme supported by the European Union.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multicomponent pharmaceutical solids

  • Choquesillo-Lazarte, Duane
  • Domínguez-Martín, Alicia
Multicomponent pharmaceutical solids is a hot topic that brings together the knowledge of crystal engineering and the need to achieve novel and effective drugs at lower costs for the pharmaceutical industry. Both the U.S. Food and Drug Administration and the European Medicines Agency encourage the use of pharmaceutical cocrystals for drug development, which is tightly regulated with appropriate guidelines. Indeed, in the past years, several cocrystal formulations have been approved and commercialized, for instance, Depakote® (2002), Suglat® (2014), Entresto® (2015), Steglatro® (2018), and Seglentis® (2021)., Grant number PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE) and B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Copper(II)-Thiodiacetate (tda) Chelate as Efficient Receptor of N9-(2-Hydroxyethyl)Adenine (9heade): Synthesis, Molecular and Crystal Structures, Physical Properties and DFT Calculations of [Cu(tda)(9heade)(H2O)]·2H2O

  • Rosales-Martínez, Carmen
  • Matilla-Hernández, A.
  • Choquesillo-Lazarte, Duane
  • Frontera, Antonio
  • Castiñeiras, Alfonso
  • Niclós-Gutiérrez, Juan
Considering that Cu(tda) chelate (tda: dithioacetate) is a receptor for adenine and related 6-aminopurines, this study reports on the synthesis, molecular and crystal structures, thermal stability, spectral properties and DFT calculations related to [Cu(tda)(9heade)(H2O)]·2H2O (1) [9heade: N9-(2-hydroxyethyl)adenine]. Concerning the molecular recognition of (metal chelate)-(adenine synthetic nucleoside), 1 represents an unprecedented metal binding pattern (MBP) for 9heade. However, unprecedentedly, the Cu(tda)-9heade molecular recognition in 1 is essentially featured in the Cu-N1(9heade) bond, without any N6-H⋯O(carboxyl tda) interligand interaction. Nevertheless, N1 being the most basic donor for N9-substituted adenines, this Cu-N1 bond is now assisted by an O2–water-mediated interaction (N6-H⋯O2 and O2⋯Cu weak contact). Also, in the crystal packing, the O-H(ol) of 9heade interacts with its own adenine moiety as a result of an O3–water-mediated interaction (O(ol)-H⋯O3 plus O3-H36⋯π(adenine moiety)). Both water-mediated interactions seem to be responsible for serious alterations in the physical properties of crystalline or grounded samples. Density functional theory calculations were used to evaluate the interactions energetically. Moreover, the quantum theory of atoms-in-molecules (QTAIM), in combination with the noncovalent interaction plot (NCIPlot), was used to analyze the interactions and rationalize the existence and relative importance of hydrogen bonding, chalcogen bonding and π-stacking interactions. The novelty of this work resides in the discovery of a novel binding mode for N9-(2-hydroxyethyl)adenine. Moreover, the investigation of the important role of water in the solid state of 1 is also relevant, along with the chalcogen bonding interactions demonstrated by the density functional theory (DFT) study., This research was funded by MICIU/AEI of Spain project PID2020-115637GB-I00 FEDER, MICINN of Spain project PGC2018-102047-B-I00, Project B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain). Funds and instrumental support of research group FQM-283 (Junta de Andalucía, Spain) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

H(N3)dap (Hdap = 2,6-Diaminopurine) Recognition by Cu2(EGTA): Structure, Physical Properties, and Density Functional Theory Calculations of [Cu4(μ-EGTA)2(μ-H(N3)dap)2(H2O)2]·7H2O

  • Mousavi, Homa
  • García-Rubiño, María Eugenia
  • Choquesillo-Lazarte, Duane
  • Castiñeiras, Alfonso
  • Lezama, Luis
  • Frontera, Antonio
  • Niclós-Gutiérrez, Juan
Reactions in water between the Cu2(µ-EGTA) chelate (EGTA = ethylene-bis(oxyethyleneimino)tetraacetate(4-) ion) and Hdap in molar ratios 1:1 and 1:2 yield only blue crystals of the ternary compound [Cu4(μ-EGTA)2(μ-H(N3)dap)2(H2O)2]·7H2O (1), which has been studied via single-crystal X-ray diffraction and various physical methods (thermal stability, spectral and magnetic properties), as well as DFT theoretical calculations. In the crystal, uncoordinated water is disordered. The tetranuclear complex molecule also has some irrelevant disorder in an EGTA-ethylene moiety. In the complex molecule, both bridging organic molecules act as binucleating ligands. There are two distorted five- and two six-coordinated Cu(II) centers. Each half of EGTA acts as a tripodal tetradentate Cu(II) chelator, with a mer-NO2 + O(ether, distal) conformation. Hdap exhibits the tautomer H(N3)dap, with the dissociable H-atom on its less basic N-heterocyclic atom. These features favor the efficient cooperation between Cu-N7 or Cu-N9 bonds with appropriate O-EGTA atoms, as N6-H···O or N3-H···O interligand interactions, respectively. The bridging role of both organics determines the tetranuclear dimensionality of the complex. In this crystal, such molecules associate in zig-zag chains built by alternating π–π interactions between the five- or six-atom rings of Hdap ligands of adjacent molecules. DFT theoretical calculations (using two different theoretical models and characterized by the quantum theory of “atoms in molecules”) reveal the importance of these π–π interactions between Hdap ligands, as well as those corresponding to the referred hydrogen bonds in the contributed tetranuclear molecule., This research was funded by MICIU/AEI of Spain project PID2020-115637GB-I00 FEDER, MICINN of Spain project PGC2018-102047-B-I00, Project B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain). Funds and instrumental support of research group FQM-283 (Junta de Andalucía, Spain) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal Transformation of Eggshell Calcium Carbonate into Apatite Micro-Nanoparticles: Cytocompatibility and Osteoinductive Properties

  • Torres-Mansilla, Adriana
  • Álvarez-Lloret, Pedro
  • Fernández-Penas, Raquel
  • D’Urso, Annarita
  • Baldión, Paula Alejandra
  • Oltolina, Francesca
  • Follenzi, Antonia
  • Gómez-Morales, Jaime
The eggshell is a biomineral consisting of CaCO3 in the form of calcite phase and a pervading organic matrix (1–3.5 wt.%). Transforming eggshell calcite particles into calcium phosphate (apatite) micro-nanoparticles opens the door to repurposing the eggshell waste as materials with potential biomedical applications, fulfilling the principles of the circular economy. Previous methods to obtain these particles consisted mainly of two steps, the first one involving the calcination of the eggshell. In this research, direct transformation by a one-pot hydrothermal method ranging from 100–200 °C was studied, using suspensions with a stoichiometric P/CaCO3 ratio, K2HPO4 as P reagent, and eggshells particles (Ø < 50 μm) both untreated and treated with NaClO to remove surface organic matter. In the untreated group, the complete conversion was achieved at 160 °C, and most particles displayed a hexagonal plate morphology, eventually with a central hole. In the treated group, this replacement occurred at 180 °C, yielding granular (spherulitic) apatite nanoparticles. The eggshell particles and apatite micro-nanoparticles were cytocompatible when incubated with MG-63 human osteosarcoma cells and m17.ASC murine mesenchymal stem cells and promoted the osteogenic differentiation of m17.ASC cells. The study results are useful for designing and fabricating biocompatible microstructured materials with osteoinductive properties for applications in bone tissue engineering and dentistry., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia e Innovación y Universidades (MCIU), Bioscaffold project, ref. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE). The Ministry of Science, Technology, and Innovation of Colombia provided support for A.T-M´s participation. P.Á.-L. acknowledge support from MCIN project PCI2019–111931-2 and the European Regional Development Fund–ERDF)—Next Generation/EU program. J.G.-M. acknowledges PCI2020-112108 funded by MCI/AEI/10.13039/501100011033 (Spain) and the European Union “NextGeneration/PRTR”. PCI2020-112108 is part of the CASEAWA project of the ERA-NET Cofund BlueBio Programme, supported by the European Union (H2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Apatite-coated outer layer eggshell membrane: A novel osteoinductive biohybrid composite for guided bone/tissue regeneration

  • Torres-Mansilla, Adriana
  • Álvarez-Lloret, Pedro
  • Voltes-Martínez, Ana
  • López-Ruiz, Elena
  • Baldión, Paula Alejandra
  • Marchal-Corrales, Juan Antonio
  • Gómez-Morales, Jaime
Hybrid biomimetic materials aim to replicate the organic-inorganic constructs of mineralized tissues. During eggshell formation, the outer surface of the eggshell membrane (ESM) promotes calcium carbonate nucleation, while the inner one prevents mineralization toward the egg white and yolk. In the current study, the outer surface of the ESM acted as a heteronucleant in calcium phosphate precipitation by the vapor diffusion sitting drop method, while the inner one remained unmineralized. The aim was to fabricate a 2D biomaterial with dual functions, osteoinductive on one side and protective against cell invasion on the other side. The microstructural, physicochemical, morphological, and mechanical properties of the mineralized ESM were characterized by XRD, TGA, XPS, FTIR/Raman, HR-SEM, and mechanical testing techniques. The cytocompatibility and osteoinductive ability were assessed by biological assays of cell viability, proliferation, and osteogenic differentiation on human mesenchymal stromal cells (hMSCs). Results indicate that the outer surface of the ESM induces the heterogeneous precipitation of carbonate-apatite phase depicting biomimetic features. In addition, the apatite/ESM shows a much higher cytocompatibility than the pristine ESM and promotes the osteogenic differentiation of hMSCs more efficiently. Overall, the apatite/ESM composite exhibits compositional, crystalline, mechanical, and biological properties that resemble those of mineralized tissues, rendering it an approachable and novel material especially useful in guided tissue/bone regeneration., This work was supported by Ministerio de Ciencia de Innovación (MCI) (Ministry of Science and Innovation, Spain) project PGC2018-102047-B-I00 (MCIU/AEI/FEDER/UE), Fundación Mutua Madrileña, Grant/Award Number: FMM-AP17196-2019, the Instituto de Salud Carlos III, ERDF funds (DTS21/00098), the Consejería de Economía y Universidad, Junta de Andalucía (PYC20 RE 015 UGR; P20_00208 of 2020) and the European Regional Development Fund (ERDF) - Next Generation/EU program and AYUD/2022/33525 (FICYT).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Tetranuclear Ni(II)-Cubane Cluster Molecule Build by Four µ3-O-Methanolate (MeO) Ligands, Externally Cohesive by Four Unprecedented Bridging µ2-N7,O6-Acyclovirate (acv-H) Anions

  • Belmont-Sánchez, Jeannette Carolina
  • Choquesillo-Lazarte, Duane
  • Navarrete-Casas, R.
  • Frontera, Antonio
  • Castiñeiras, Alfonso
  • Niclós-Gutiérrez, Juan
  • Matilla-Hernández, Antonio
Metal ion interactions with nuclei acids and their constituents represent a multi-faceted and growing research field. This contribution deals with molecular recognition between synthetic purine 17 nucleosides and first-row transition metal complexes, with O- and/or N-amino chelators which are able to 18 engage in intra-molecular N-H···(N or O) and O-H···(N or O) interligand interactions. Crystals of these complexes can also display inter-molecular aromatic π-stacking and/or other non-conventional interactions. In this manuscript, we used 2-(2-aminoethoxy)ethanol (2aee) as a potential N,O(e),O(ol)-chelator for nickel(II). However, unexpectedly, the reaction between NiCl, acyclovir (acv), and 2aee in methanol afforded parallelepiped apple-green crystals of [Ni(acv-H)(MeO)(HO)]·8HO, (1) a tetranuclear molecule with an equimolar Ni(II):µ-methanolate(1-):µ-N7,O6-acyclovirate(1-) (acv-H) ratio. The µ-N7,O6-(acv-H) metal-binding pattern (MBP) is unprecedented in terms of both its anionic and bridging roles. The single-crystal X-ray diffraction structure as well as thermogravimetric analysis and the (FT-IR +Vis-UV) spectra of 1 are reported. Theoretical density functional theory (DFT) calculations are used to analyse the antiparallel π-stacking interactions that govern the formation of self-assembled dimers in the solid state., his research was funded by MICINN of Spain (project PGC2018-102047-B-I00), MICIU/AEI of Spain (project PID2020-115637GB-I00, FEDER), Project B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain) and the Research groups FQM-283 and FQM-243 (Junta de Andalucía, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eggshell Membrane as a Biomaterial for Bone Regeneration

  • Torres-Mansilla, Adriana
  • Hincke, Maxwell
  • Voltes-Martínez, Ana
  • López-Ruiz, Elena
  • Baldión, Paula Alejandra
  • Marchal-Corrales, Juan Antonio
  • Álvarez-Lloret, Pedro
  • Gómez-Morales, Jaime
This article belongs to the Special Issue Polymers for Tissue Engineering and Biofabrication., The physicochemical features of the avian eggshell membrane play an essential role in the process of calcium carbonate deposition during shell mineralization, giving rise to a porous mineralized tissue with remarkable mechanical properties and biological functions. The membrane could be useful by itself or as a bi-dimensional scaffold to build future bone-regenerative materials. This review focuses on the biological, physical, and mechanical properties of the eggshell membrane that could be useful for that purpose. Due to its low cost and wide availability as a waste byproduct of the egg processing industry, repurposing the eggshell membrane for bone bio-material manufacturing fulfills the principles of a circular economy. In addition, eggshell membrane particles have has the potential to be used as bio-ink for 3D printing of tailored implantable scaffolds. Herein, a literature review was conducted to ascertain the degree to which the properties of the eggshell membrane satisfy the requirements for the development of bone scaffolds. In principle, it is biocompatible and non-cytotoxic, and induces proliferation and differentiation of different cell types. Moreover, when implanted in animal models, it elicits a mild inflammatory response and displays characteristics of stability and biodegradability. Furthermore, the eggshell membrane possesses a mechanical viscoelastic behavior comparable to other collagen-based systems. Overall, the biological, physical, and mechanical features of the eggshell membrane, which can be further tuned and improved, make this natural polymer suitable as a basic component for developing new bone graft materials., his work was supported by Ministerio de Ciencia de Innovación (MCINN) (Ministry of Science and Innovation, Spain) project PGC2018-102047-B-I00 (MCIU/AEI/FEDER/UE), Fundación Mutua Madrileña, Grant/Award Number: FMM-AP17196-2019, the Instituto de Salud Carlos III, ERDF funds (DTS21/00098), the Consejería de Economía y Universidad, Junta de Andalucía (PYC20 RE 015 UGR; P20_00208 of 2020) and the European Regional Development Fund (ERDF)–Next Generation/EU program and grant AYUD/2022/33525 (FICYT). M.H.’s participation was supported by the Canadian Natural Sciences and Engineering Research Council (NSERC, Discovery program: RGPIN-2022-04803). This publication is part of Grant ref. PID2022-142886NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” by the “European Union.” The Ministerio de Ciencia Tecnología e Innovación (Ministry of Science, Technology, and Innovation, Colombia) provided support for A.T-M´s participation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Drug-Inclusive Inorganic–Organic Hybrid Systems for the Controlled Release of the Osteoporosis Drug Zoledronate

  • Vassaki, Maria
  • Lazarou, Savvina
  • Turhanen, Petri
  • Choquesillo-Lazarte, Duane
  • Demadis, K. D.
Bisphosphonates (BPs) are common pharmaceutical treatments used for calcium- and bone-related disorders, the principal one being osteoporosis. Their antiresorptive action is related to their high affinity for hydroxyapatite, the main inorganic substituent of bone. On the other hand, the phosphonate groups on their backbone make them excellent ligands for metal ions. The combination of these properties finds potential application in the utilization of such systems as controlled drug release systems (CRSs). In this work, the third generation BP drug zoledronate (ZOL) was combined with alkaline earth metal ions (e.g., Sr and Ba) in an effort to synthesize new materials. These metal–ZOL compounds can operate as CRSs when exposed to appropriate experimental conditions, such as the low pH of the human stomach, thus releasing the active drug ZOL. CRS networks containing Sr or Ba and ZOL were physicochemically and structurally characterized and were evaluated for their ability to release the free ZOL drug during an acid-driven hydrolysis process. Various release and kinetic parameters were determined, such as initial rates and release plateau values. Based on the drug release results of this study, there was an attempt to correlate the ZOL release efficiency with the structural features of these CRSs., The research work was supported by the Hellenic Foundation for Research and Innovation (HFRI) under the HFRI PhD Fellowship grant (Fellowship Number: 258) to M.V. D.C.-L. acknowledges funding by project no. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploiting the Multifunctionality of M2+/Imidazole-Etidronates for Proton Conductivity (Zn2+) and Electrocatalysis (Co2+, Ni2+) toward the HER, OER, and ORR

  • Vílchez-Cózar, Álvaro
  • Armakola, Eirini
  • Gjika, Maria
  • Visa, Aurelia
  • Bazaga-García, Montse
  • Olivera-Pastor, Pascual
  • Choquesillo-Lazarte, Duane
  • Marrero-López, David
  • Cabeza, Aurelio
  • Colodrero, Rosario M. P.
  • Demadis, Konstantinos D.
This work deals with the synthesis and characterization of one-dimensional (1D) imidazole-containing etidronates, [M(ETID)(Im)]·nHO (M = Co and Ni; n = 0, 1, 3) and [Zn(ETID)(HO)](Im), as well as the corresponding Co/Ni solid solutions, to evaluate their properties as multipurpose materials for energy conversion processes. Depending on the water content, metal ions in the isostructural Co and Ni derivatives are octahedrally coordinated (n = 3) or consist of octahedral together with dimeric trigonal bipyramidal (n = 1) or square pyramidal (n = 0) environments. The imidazole molecule acts as a ligand (Co, Ni derivatives) or charge-compensating protonated species (Zn derivative). For the latter, the proton conductivity is determined to be ∼6 × 10 S·cm at 80 °C and 95% relative humidity (RH). By pyrolyzing in 5%H-Ar at 700-850 °C, core-shell electrocatalysts consisting of Co-, Ni-phosphides or Co/Ni-phosphide solid solution particles embedded in a N-doped carbon graphitic matrix are obtained, which exhibit improved catalytic performances compared to the non-N-doped carbon materials. Co phosphides consist of CoP and CoP in variable proportions according to the used precursor and pyrolytic conditions. However, the Ni phosphide is composed of NiP exclusively at high temperatures. Exploration of the electrochemical activity of these metal phosphides toward the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER) reveals that the anhydrous Co(ETID)(Im) pyrolyzed at 800 °C (CoP/CoP = 80/20 wt %) is the most active trifunctional electrocatalyst, with good integrated capabilities as an anode for overall water splitting (cell voltage of 1.61 V) and potential application in Zn-air batteries. This solid also displays a moderate activity for the HER with an overpotential of 156 mV and a Tafel slope of 79.7 mV·dec in 0.5 M HSO. Ni- and Co/Ni-phosphide solid solutions show lower electrochemical performances, which are correlated with the formation of less active crystalline phases., A.V.-C. thanks MICIU for PRE2020-094459 student grant; M.B.-G. thanks PAIDI2020-DOC_00272 research grant (Junta de Andalucia, Spain) and R.M.P.C. thanks University of Malaga under Plan Propio de Investigación for financial support. Funding for open access charge: Universidad de Málaga/CBUA. The work at UMA was funded by PID2019-110249RB-I00 (MICIU/AEI, Spain) and PY20-00416 (Junta de Andalucia, Spain/FEDER) research projects. D.C.-L. acknowledges funding by project no. PGC2018-102047-B-I00 (MICIU/AEI/FEDER, UE). The work at UoC was funded by the Special Account of Research, Program Innovative Materials and Applications INNOVAMAT, KA 10694.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lidocaine Pharmaceutical Multicomponent Forms: A Story about the Role of Chloride Ions on Their Stability

  • Verdugo-Escamilla, Cristóbal
  • Alarcón-Payer, Carolina
  • Acebedo-Martínez, Francisco Javier
  • Fernández-Penas, Raquel
  • Domínguez-Martín, Alicia
  • Choquesillo-Lazarte, Duane
In this investigation, three new crystal forms of lidocaine, and another three of lidocaine hydrochloride with hydroquinone, resorcinol, and pyrogallol were synthetised. All the new forms were characterised using multiple techniques, PXRD, SC-XRD, DSC, and FTIR. The stability of the forms was studied, and, for the more stable forms, i.e., (lidhcl) forms, the solubility was determined through FTIR analysis. The new crystalline forms obtained with (lidhcl) and the three conformers showed an interesting steric stabilisation mechanism of the oxidation of hydroxybenzenes and showed good physicochemical properties with respect to (lidhcl), constituting a mechanism of modulation of the physicochemical properties., This research was funded by the Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia, Innovación, y Universidades (MICIU) and co-funded by FEDER, UE, Project PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE) and Project B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Luminescent Citrate-Functionalized Terbium-Substituted Carbonated Apatite Nanomaterials: Structural Aspects, Sensitized Luminescence, Cytocompatibility, and Cell Uptake Imaging

  • Gómez-Morales, Jaime
  • Fernández-Penas, Raquel
  • Acebedo-Martínez, Francisco Javier
  • Romero-Castillo, Ismael
  • Verdugo-Escamilla, Cristóbal
  • Choquesillo-Lazarte, Duane
  • Esposti, Lorenzo Degli
  • Jiménez-Martínez, Yaiza
  • Fernández-Sánchez, Jorge F.
  • Iafisco, Michele
  • Boulaiz, Houria
This work explores the preparation of luminescent and biomimetic Tb-doped citrate-functionalized carbonated apatite nanoparticles. These nanoparticles were synthesized employing a citrate-based thermal decomplexing precipitation method, testing a nominal Tb doping concentration between 0.001 M to 0.020 M, and a maturation time from 4 h to 7 days. This approach allowed to prepare apatite nanoparticles as a single hydroxyapatite phase when the used Tb concentrations were (i) ≤ 0.005 M at all maturation times or (ii) = 0.010 M with 4 h of matura-tion. At higher Tb concentrations, amorphous TbPO·nH O formed at short maturation times, while materials consisting of a mixture of carbonated apatite prisms, TbPO·H O (rhabdophane) nanocrystals, and an amorphous phase formed at longer times. The Tb content of the samples reached a maximum of 21.71 wt%. The relative luminescence intensity revealed an almost linear de-pendence with Tb up to a maximum of 850 units. Neither pH, nor ionic strength, nor temperature significantly affected the luminescence properties. All precipitates were cytocompatible against A375, MCF7, and HeLa carcinogenic cells, and also against healthy fibroblast cells. Moreover, the luminescence properties of these nanoparticles allowed to visualize their intracellular cytoplasmic uptake at 12 h of treatment through flow cytometry and fluorescence confocal microscopy (green fluorescence) when incubated with A375 cells. This demonstrates for the first time the potential of these materials as nanophosphors for living cell imaging compatible with flow cytometry and fluorescence confocal microscopy without the need to introduce an additional fluorescence dye. Overall, our results demonstrated that Tb-doped citrate-functionalized apatite nanoparticles are excellent candidates for bioimaging applications., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia e Innovación y Universidades (MCIU), Bioscaffold project, ref. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE), and FEDER Operational Program 2020/Junta de Andalucía-Consejería de Economía y Conocimiento/Project (B-CTS-562-UGR20). JGM, RFP, CVE, IR, FJAM and DCL belong to the Thematic network “CrysFact, ref. RED2018-102574-T (MCIU/AEI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Metformin–Citric Acid Pharmaceutical Molecular Salt: Improving Metformin Physicochemical Properties

  • Verdugo-Escamilla, Cristóbal
  • Alarcón-Payer, Carolina
  • Acebedo-Martínez, Francisco Javier
  • Domínguez-Martín, Alicia
  • Choquesillo-Lazarte, Duane
Crystal engineering and, more specifically, the development of multicomponent materials has become an effective technique to rationally modify important physicochemical properties of solids, such as solubility and thermal stability. In this work, in order to overcome some of the problems that metformin has as a pharmaceutical, a new metformin base salt with citric acid (MTF–CIT) has been developed, which improves the thermal stability and solubility (two-fold) compared to metformin base (MTF). A complete characterization of the new crystalline form through PXRD, DSC, SCXRD, and FT–IR was conducted to ensure the purity of the new phase and provide a comprehensive view of its physicochemical behavior, thus correlating the improvement in stability and solubility with the crystal structure. The MTF–CIT salt crystallizes in the monoclinic P2/c1 spacegroup with z′ = 1. Intermolecular interactions found in MTF–CIT structure and simulated crystal morphology suggest a steric protection effect on the metformin ion that leads to the enhancement of stability in several orders of magnitude compared with MTF, as well as an improvement in solubility due to the exposition of polar groups in the biggest facets, making this new multicomponent salt a promising pharmaceutical solid., This research was funded by Project PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE) and Project B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain). F.J.A.-M. wants to acknowledge an FPI grant (Ref. PRE2019-088832). C.V.-E. acknowledges Project PTA2020-019483-I funded by the Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia e Innovación.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards the Development of Novel Diclofenac Multicomponent Pharmaceutical Solids

  • Acebedo-Martínez, Francisco Javier
  • Alarcón-Payer, Carolina
  • Barrales-Ruiz, Helena María
  • Niclós-Gutiérrez, Juan
  • Domínguez-Martín, Alicia
  • Choquesillo-Lazarte, Duane
Multicomponent pharmaceutical materials offer new opportunities to address drug physicochemical issues and to obtain improved drug formulation, especially on oral administration drugs. This work reports three new multicomponent pharmaceutical crystals of the non-steroidal anti-inflammatory drug diclofenac and the nucleobases adenine, cytosine, and isocytosine. They have been synthesized by mechanochemical methods and been characterized in-depth in solid-state by powder and single crystal X-ray diffraction, as well as other techniques such as thermal analyses and infrared spectroscopy. Stability and solubility tests were also performed on these materials. This work aimed to evaluate the physicochemical properties of these solid forms, which revealed thermal stability improvement. Dissociation of the new phases was observed in water, though. This fact is consistent with the reported observed layered structures and BFDH morphology calculations., This research was funded by Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia, Innovación y Universidades (MICIU) and co-funded with FEDER, UE, project no. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE) and project B-FQM-478-UGR20 (FEDER-Universidad de Granada, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomolecule-functionalized exfoliated-graphene and graphene oxide as heteronucleants of nanocrystalline apatites to make hybrid nanocomposites with tailored mechanical, luminescent, and biological properties

  • Acebedo-Martínez, Francisco Javier
  • Baldión, Paula Alejandra
  • Oltolina, Francesca
  • Follenzi, Antonia
  • Falini, Giuseppe
  • Fernández-Sánchez, Jorge Fernando
  • Choquesillo Lazarte, Duane
  • Gómez-Morales, Jaime
Nanocrystalline apatite (Ap), known for its exceptional biological properties, faces limitations in hard tissue engineering due to its poor mechanical properties. To overcome this limitation, we investigated the preparation of nanocomposites through heterogeneous nucleation of calcium phosphate on exfoliated graphene (G) and graphene oxide (GO) flakes, selected for their outstanding mechanical properties. The flakes were treated (functionalized) with amino acids of varying isoelectric points—namely L-Arginine (Arg), L-Alanine (Aln) and L-Aspartic acid (Asp)— as well as citrate (Cit) molecules. Furthermore, Tb3+ was incorporated into the formulations to introduce luminescence and further enrich the functionality of the composite. The synthesis was conducted using the sitting drop vapor diffusion method. Functionalized GO/Ap nanocomposites significantly improved roughness, adhesion forces and elastic modulus compared to Ap and G-based particles. GO-Asp-Ap-Tb nanocomposites exhibited the highest roughness (163.8 ± 116.2 nm), while G-Cit-Ap had the lowest (6.8 ± 5.6 nm). In terms of adhesion force, GO-Cit-Ap-Tb reached the highest value (31.06 ± 13.3 nN), while G-Arg-Ap had the lowest (3.7 ± 1.8 nN) compared to Ap (13.6 ± 3.2 nN). For the elastic modulus, GO-Aln-Ap-Tb demonstrated the greatest stiffness (3489 ± 101.01 MPa) compared to Ap (30.2 ± 6.5 MPa), while G-Aln-Ap-Tb showed the lowest (17.2 ± 8.4 MPa). Concerning their luminescence, regardless of G/Ap and GO/Ap, the relative luminescence intensities depended on the biomolecule used and decreased in the order Arg > Aln > Asp and Cit. Furthermore, G/Ap and GO/Ap nanocomposites demonstrated good biocompatibility on murine mesenchymal stem cells at low concentrations, showing cell viabilities exceeding 80 % at 0.1 μg/mL. This research offers a novel approach to enhancing the mechanical properties of apatites while preserving their good biocompatibility properties and introducing new functionalities (i.e. luminescence) in the composites, thereby expanding their range of applications in hard tissue engineering., Spanish Agencia Estatal de Investigación of the Ministerio de Ciencia e Innovación y Universidades (MCIU), Bioscaffold project, ref. PGC2018-102047-B-I00 (MCIU/AEI/FEDER, UE), funded this research. FJAM acknowledge FPIgrant (Ref. PRE2019-088832) funded by the Spanish Agencia Estatal de Investigación of the MCIU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Bifunctional apatite-mineralized outer-layer eggshell membranes for guided bone regeneration

  • Gómez-Morales, Jaime
  • Álvarez-Lloret, Pedro
  • Torres-Mansilla, Adriana
  • Voltes, Ana
  • Fernández-Penas, Raquel
  • López-Ruiz, Elena
  • Baldión, Paula Alejandra
  • Marchal, Juan Antonio
Comunicación oral presentada en GE3C 2026: XXXII Simposio del Grupo Especializado de Cristalografía y Crecimiento Cristalino, celebrado en Jaca del 13 al 16 de enero 2026, The eggshell membrane (ESM) is a biopolymeric network composed of crosslinked collagens I, V, and X (about 10% of total protein content), glycosaminoglycans, egg white proteins, and eggshell matrix proteins (where collagens form the core of the fibers). The ESM is arranged as a triple-layer structure formed by an outer layer, in close contact with the calcareous shell, the inner layer, intertwined with fibers in the outer layer–, and the layer in contact with the egg white known as the limiting membrane [1]. ESM naturally promotes the nucleation of CaCO3 on the outer layer to form the shell while it acts as a barrier to prevent inward mineralization toward the egg white and yolk [2]. Thus, the outer layer of the membrane can be a suitable heteronucleant surface for the controlled synthesis of calcium phosphate. Here, we report the controlled precipitation of nanocrystalline calcium phosphate (apatite) by the sitting drop vapor diffusion technique. Results show that the outer surface of ESM promotes the nucleation while the limiting membrane does not. The physicochemical and crystallographic characteristics of the mineral coating, populated with AB-type CO3-apatite nanocrystals, depicted biomimetic bonelike features. Biological tests performed on human mesenchymal stromal cells (hMSCs) demonstrated enhanced biocompatibility compared to ESM unmineralized, as well as the ability to induce osteogenic differentiation of hMSCs and produce collagen I. Mechanical properties of the ESM are comparable to those of commercial membranes, in particular the tensile strength and elastic modulus, which were enhanced with the increase in mineral content [3]. The apatite-coated outer-layer ESM, endowed with osteoinductive and barrier functions on opposite sides, proved to be an excellent bifunctional membrane candidate for guided bone regeneration (GBR), a widely used technique in dentistry that aids in regenerating bone/tissue after removing a tooth, before placing a dental implant [4]. Current research within the framework of the GBRMat project focuses on doping the apatitic layer with metallic ions to provide the mineralized ESMs with new functionalities, i.e. Mg2+, Sr2+ (osteogenic), Cu2+, Ag+ (antibacterial), Eu3+ and Tb3+ (luminescent), and also on integrating pharmaceutical cocrystals of non-steroidal anti-inflammatories and antimicrobial drugs. This innovative approach aims to repurpose and valorize ESMs, which are significant waste products from the food industry, transforming them into a promising biomaterial for guided bone regeneration., We acknowledge project “Multifunctional apatites and pharmaceutical cocrystals associated with materials for guided bone regeneration (GBRMat) ref. PGC2018-102047-BI00 (MCIU/AEI/FEDER/UE)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Broadening the scope of high structural dimensionality nanomaterials using pyridine-based curcuminoids

  • Rodríguez-Cid L.
  • Qian W.
  • Iribarra-Araya J.
  • Etcheverry-Berríos Á.
  • Martínez-Olmos E.
  • Choquesillo-Lazarte D.
  • Sañudo E.C.
  • Roubeau O.
  • López-Periago A.M.
  • González-Campo A.
  • Planas J.G.
  • Soler M.
  • Domingo C.
  • Aliaga-Alcalde N.
We present a new heteroditopic ligand (3pyCCMoid) that contains the typical skeleton of a curcuminoid (CCMoid) decorated with two 3-pyridyl groups. The coordination of 3pyCCMoid with ZnII centres results in a set of novel coordination polymers (CPs) that display different architectures and dimensionalities (from 1D to 3D). Our work analyses how synthetic methods and slight changes in the reaction conditions affect the formation of the final materials. Great efforts have been devoted toward understanding the coordination entities that provide high dimensional systems, with emphasis on the characterization of 2D materials, including analyses of different types of substrates, stability and exfoliation in water. Here, we foresee the great use of CCMoids in the field of CPs and emphasize 3pyCCMoid as a new-born linker.