Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biodegradable Mono and Multilayer Materials with Antimicrobial Capacity Based on Circular Bioeconomy of Application Interest in Food Packaging

  • Figueroa López, Kelly Johana
[ES] El envasado activo es una de las tecnologías emergentes más relevantes de la industria alimentaria. Su objetivo es interactuar con el espacio de cabeza del envase para controlar las reacciones enzimáticas, químicas, físicas y microbiológicas que deterioran los alimentos por medio de la absorción o liberación. La actual tesis doctoral trata originalmente del desarrollo y la caracterización de estructuras de envasado de alimentos activas y biodegradables mono y multicapa basadas en materiales de polihidroxialcanoatos (PHA) electroestirados derivados de estrategias de bioeconomía circular. Con el fin de dotar con propiedades activas los materiales de envasado, se incorporaron a los PHA aceites esenciales, extractos naturales, nanopartículas metálicas o combinaciones de los mismos mediante electrospinning de soluciones. Las fibras resultantes de PHA por electrospinning se recocieron para obtener monocapas continuas que, posteriormente, se combinaron con películas de polímeros biodegradables fundidas, sopladas o fundidas con disolventes y/o con revestimientos de barrera de nanocristales de celulosa bacteriana (CNC) para desarrollar novedosos sistemas multicapa con propiedades antimicrobianas y de barrera. Estos sistemas multicapas basados en PHA presentaron un buen rendimiento térmico y mecánico, así como altas propiedades de barrera a los vapores y gases. Las películas activas también mostraron mejores propiedades antioxidantes y una alta actividad antimicrobiana contra las bacterias transmitidas por los alimentos tanto en sistemas abiertos como, lo que es más importante, en sistemas cerrados, que pueden imitar las condiciones de envasado en casos reales. Por lo tanto, los materiales y prototipos desarrollados en este trabajo pueden ser muy prometedores como materiales de envasado, para constituir bandejas, flow packs y tapas, siendo completamente renovables y también biodegradables, con una potencial capacidad de aumentar tanto la calidad, como la seguridad de los productos alimenticios en el nuevo contexto de la Bioeconomía Circular., [CA] L'envasament actiu és una de les tecnologies emergents més rellevants de la indústria alimentària. El seu objectiu és interactuar amb l'espai de cap de l'envàs per controlar les reaccions enzimàtiques, químiques, físiques i microbiològiques que deterioren els aliments per mitjà de l'absorció o alliberament. L'actual tesi doctoral tracta originalment de el desenvolupament i la caracterització d'estructures d'envasat d'aliments actives i biodegradables mono i multicapa basades en materials de polihidroxialcanoatos (PHA) electroestirados derivats d'estratègies de bioeconomia circular. Per tal de dotar amb propietats actives dels materials d'envasat, es van incorporar als PHA olis essencials, extractes naturals, nanopartícules metàl·liques o combinacions dels mateixos mitjançant electrospinning de solucions. Les fibres resultants de PHA per electrospinning es recocieron per obtenir monocapes contínues que, posteriorment, es van combinar amb pel·lícules de polímers biodegradables foses, bufades o foses amb dissolvents i / o amb revestiments de barrera de nanocristalls de cel·lulosa bacteriana (CNC) per desenvolupar nous sistemes multicapa amb propietats antimicrobianes i de barrera. Aquests sistemes multicapes basats en PHA van presentar un bon rendiment tèrmic i mecànic, així com altes propietats de barrera als vapors i gasos. Les pel·lícules actives també van mostrar millors propietats antioxidants i una alta activitat antimicrobiana contra bacteris transmeses pels aliments tant en sistemes oberts com, el que és més important, en sistemes tancats, que poden imitar les condicions d'envasament en casos reals. Per tant, els materials i prototips desenvolupats poden ser molt prometedors com materials d'envasat, per constituir safates, flow packs i tapes, sent completament renovables i també biodegradables, amb la capacitat potencial final d'augmentar tant la qualitat, com la seguretat de els productes alimentaris en el nou context de l'Bioeconomia Circular., [EN] Active packaging is one of the most relevant emerging technologies in the food industry. It aims to interact with the packaging headspace to control the enzymatic, chemical, physical, and microbiological reactions that deteriorate food through scavenging or releasing means. The current PhD thesis originally deals with the development and characterization of mono and multilayer active and biodegradable food packaging structures based on electrospun polyhydroxyalkanoates (PHA) materials derived from circular bioeconomy strategies. In order to provide the packaging materials with active properties, essential oils, natural extracts, metallic nanoparticles or combinations thereof were incorporated into PHA by solution electrospinning. The resultant electrospun PHA mats were annealed to obtain continuous monolayers that were, thereafter, combined with cast-extruded, blown or solvent-casted biodegradable polymer films and/or barrier coatings of bacterial cellulose nanocrystals (CNCs) to develop novel multilayer systems with antimicrobial and barrier properties. These PHA-based multilayers systems presented good thermal and mechanical performance as well as high barrier properties to vapors and gases. The active films also showed improved antioxidant properties and high antimicrobial activity against food-borne bacteria in both open and, more importantly, closed systems, which can mimic real case use packaging conditions. Therefore, the here-developed materials and prototypes can be very promising as packaging materials, to constitute trays, flow packs and lids, being completely renewable and also biodegradable, with the final potential capacity to increase both quality and safety of food products in the new Circular Bioeconomy context., Al programa Santiago Grisolía de la Generalitat Valenciana (0001426013N810001A201) por concederme la beca Predoctoral. Al proyecto EU H2020 YPACK “High Performance Polyhydroxyalkanoates Based Packaging to Minimise Food Waste” (Grant agreement 773872) de la Comisión Europea. Al proyecto RTI2018-097249-B-C21 financiado por el Ministerio de Ciencia e Innovación de España. A la Unidad Asociada IATA-UJI en “Polymer Technology”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Monolayers Containing Eugenol and Their Application in Multilayer Antimicrobial Food Packaging

  • Figueroa-López, Kelly J.
  • Cabedo, Luis
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this research, different contents of eugenol in the 2.5-25 wt.% range were first incorporated into ultrathin fibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by electrospinning and then subjected to annealing to obtain antimicrobial monolayers. The most optimal concentration of eugenol in the PHBV monolayer was 15 wt.% since it showed high electrospinnability and thermal stability and also yielded the highest bacterial reduction against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). This eugenol-containing monolayer was then selected to be applied as an interlayer between a structural layer made of a cast-extruded poly(3-hydroxybutyrate) (PHB) sheet and a commercial PHBV film as the food contact layer. The whole system was, thereafter, annealed at 160°C for 10 s to develop a novel multilayer active packaging material. The resultant multilayer showed high hydrophobicity, strong adhesion and mechanical resistance, and improved barrier properties against water vapor and limonene vapors. The antimicrobial activity of the multilayer structure was also evaluated in both open and closed systems for up to 15 days, showing significant reductions (R ¿ 1 and < 3) for the two strains of food-borne bacteria. Higher inhibition values were particularly attained against S. aureus due to the higher activity of eugenol against the cell membrane of Gram positive (G+) bacteria. The multilayer also provided the highest antimicrobial activity for the closed system, which better resembles the actual packaging and it was related to the headspace accumulation of the volatile compounds. Hence, the here-developed multilayer fully based on polyhydroxyalkanoates (PHAs) shows a great deal of potential for antimicrobial packaging applications using biodegradable materials to increase both quality and safety of food products., This research was funded by the Spanish Ministry of Science and Innovation (MICI) through the RTI2018-097249-B-C21 program number and the H2020 EU project YPACK (reference number 773872). KF-L is a recipient of a Santiago Grisolía (Ref. 0001426013N810001A201) research contract of the Valencian Government (GVA) whereas ST-G holds a Juan de la Cierva¿ Incorporación contract (IJCI-2016-29675) from MICI. The authors would also like to thank the Unidad Asociada IATA-UJI Plastics Technology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrospun Active Biopapers of Food Waste Derived Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with Short-Term and Long-Term Antimicrobial Performance

  • Figueroa-López, Kelly J.
  • Enescu, Daniela
  • Cabedo, Luis
  • Cerqueira, Miguel A.
  • Pastrana, Lorenzo M.
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This research reports about the development by electrospinning of fiber-based films made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from fermented fruit waste, so-called bio-papers, with enhanced antimicrobial performance. To this end, different combinations of oregano essential oil (OEO) and zinc oxide nanoparticles (ZnONPs) were added to PHBV solutions and electrospun into mats that were, thereafter, converted into homogeneous and continuous films of similar to 130 mu m. The morphology, optical, thermal, mechanical properties, crystallinity, and migration into food simulants of the resultant PHBV-based bio-papers were evaluated and their antimicrobial properties were assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in both open and closed systems. It was observed that the antimicrobial activity decreased after 15 days due to the release of the volatile compounds, whereas the bio-papers filled with ZnONPs showed high antimicrobial activity for up to 48 days. The electrospun PHBV biopapers containing 2.5 wt% OEO + 2.25 wt% ZnONPs successfully provided the most optimal activity for short and long periods against both bacteria, K.J.F.-L. is a recipient of a Santiago Grisolia research contract (0001426013N810001A201) of Generalitat Valenciana (GVA). S.T.-G. acknowledges MICI for his Juan de la Cierva-Incorporacion contract (IJCI-2016-29675) and the European Commission for the financial support received through his Marie Skodowska-Curie action (MSCA) at Decorgel - Produtos Alimentares S.A. in collaboration with the INL within the frame of the FODIAC project. The authors would also like to thank the Unidad Asociada IATA-UJI in "Plastics Technology."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antibacterial and Barrier Properties of Gelatin Coated by Electrospun Polycaprolactone Ultrathin Fibers Containing Black Pepper Oleoresin of Interest in Active Food Biopackaging Applications

  • Figueroa-López, Kelly Johana
  • Castro-Mayorga, Jinneth Lorena
  • Andrade-Mahecha, Maragarita María
  • Cabedo, Luis
  • Lagaron, José María
[EN] The present study evaluated the effect of using electrospun polycaprolactone (PCL) as a barrier coating and black pepper oleoresin (OR) as a natural extract on the morphology, thermal, mechanical, antimicrobial, oxygen, and water vapor barrier properties of solvent cast gelatin (GEL). The antimicrobial activity of the developed multilayer system obtained by the so-called electrospinning coating technique was also evaluated against Staphylococcus aureus strains for 10 days. The results showed that the multilayer system containing PCL and OR increased the thermal resistance, elongated the GEL film, and significantly diminished its permeance to water vapor. Active multilayer systems stored in hermetically closed bottles increased their antimicrobial activity after 10 days by inhibiting the growth of Staphylococcus aureus. This study demonstrates that addition of electrospun PCL ultrathin fibers and OR improved the properties of GEL films, which promoted its potential use in active food packaging applications., The authors would like to thank the Unidad Asociada IATA-UJI "Plastics Technology", the Spanish Ministry of Economy and Competitiveness (MINECO) project AGL2015-63855-C2-1-R, and the H2020 EU project YPACK (reference number 773872) for funding. Kelly J. Figueroa-Lopez is a recipient of a Grisolia (Ref. 0001426013N810001A201) research contract of the Valencian Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of electrospun active films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by the incorporation of cyclodextrin inclusion complexes containing oregano essential oil

  • Figueroa-Lopez, K.J.
  • Enescu, D.
  • Cabedo, L.
  • Cerqueira, M.A.
  • Pastrana, L.
  • Fuciños, P.
  • Lagaron, J.M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] This paper reports the development of biodegradable active packaging films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by the incorporation of alpha- and gamma-cyclodextrins (alpha-CD and gamma-CDs) containing oregano essential oil (OEO). Herein, both the kneading method (KM) and freeze-drying method (FDM) were first explored for the preparation of alpha-CD:OEO and gamma-CD:OEO inclusion complexes at host:guest ratios of 80:20 wt/wt and 85:15 wt/wt, respectively. The results showed that KM was the most efficient method for the encapsulation of OEO in the CDs cavity in terms of simplicity and rapidity, while it was also yielded the inclusion complexes with the highest antimicrobial and antioxidant performance. The alpha-CD:OEO and gamma-CD:OEO inclusion complexes obtained by KM were thereafter incorporated at 10, 15, 20, 25, and 30 wt% into PHBV fibres by electrospinning and annealed at 160 degrees C to produce contact transparent films. It was observed that the optimal concentration of alpha-CD:OEO and gamma-CD:OEO inclusion complexes for homogeneous and continuous film formation was attained at contents of 15 and 25 wt%, respectively. Higher antimicrobial and antioxidant activities were obtained for the gamma-CD:OEO inclusion complexes due to the greater encapsulation efficiency of OEO in gamma-CD, resulting in PHBV films with good performance for up to 15 days. This aspect, together with their improved thermal stability and mechanical strength, give interesting applications to these biopolymer films in the design of active-releasing packaging materials to maintain the physical, chemical, and microbiological characteristics of food products., The authors would like to thank the Unidad Asociada IATA-UJI "Plastics Technology" and the Spanish Ministry of Science and Innovation (MICI) project RTI 2018-097249-B-C21 and the H2020 EU project YPACK (reference number 773872) for funding. Kelly J. Figueroa-Lopez and S. Torres-Giner are recipients of a Grisolia scholarship (Ref. 0001426013N810001A201) of the Valencian Government (GVA) and a Juan de la Cierva-Incorporaci.on contract (IJCI-2016-29675) from MICI, respectively.