Pasar al contenido principal

EVAPORACION NATURAL ASISTIDA CON MATERIALES ABSORBENTES DE BAJO COSTE PARA EL TRATAMIENTO DE EFLUENTES CONCENTRADOS DE GESTION COMPLEJA

PID2020-119142RA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient single-step reactive compatibilization of hemp flour-reinforced PLA/TPS blends: Exploring eco-friendly alternatives and bio-based compatibilizers from maleinized hemp oil

  • Lerma-Canto, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] In a blend of poly(lactic acid) (PLA) and thermoplastic starch (TPS), a 15% load of hemp seed lignocellulosic filler (HF) was incorporated. Additionally, separate petrochemical-based compatibilizers, such as dicumyl peroxide (DCM) and benzoyl peroxide (LRL), as well as a bio-based compatibilizer, maleinized hemp seed oil (MHO), were introduced. Adding HF to the PLA/TPS blend reduced tensile mechanical properties due to the stress concentration phenomenon arising from the lack of interaction between components, yielding a more brittle material. This issue was mitigated by adding compatibilizers, notably the incorporation of MHO into the PLA/TPS/HF blend this increased elongation at break by enhancing compatibility among the blend components and providing a plasticizing effect. Moreover, regarding thermal properties, it was observed that the inclusion of HF led to a decrease in the glass transition temperature (Tg), cold crystallization temperature (Tcc), and melting temperature (Tm). Conversely, adding MHO to this blend increased all these values compared to the PLA/TPS/HF mixture, attributed to the plasticizing effect imparted by the modified oil. Additionally, following fracture in Charpy impact testing, the samples were subjected to field emission scanning electron microscopy (FESEM) analysis to examine the fractured surface of the various samples., This research work was funded by the Ministry of Science and Innovation through Retos de la Sociedad , project reference PID2020-119142RA-I00 and is part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/ 501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/ 094. Funded with Aid for First Research Projects (PAID-06- 22), Vice-rectorate for Research of the Universitat Politècnica de València (UPV). J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel compatibilizers and plasticizers developed from epoxidized and maleinized chia oil in composites based on PLA and chia seed flour

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] Novel compatibilizers and plasticizers derived from epoxidized chia seed oil (ECO) and maleinized chia seed oil (MCO) have been applied in composites based on poly(lactic acid) (PLA) and 15 wt% chia seed flour (CSF). Results obtained have been compared to conventional silane coupling agent, (3-glycidyloxypropyl) trimethoxysilane (GPS), and a petroleum-based compatibilizer, poly(styrene-co-glycidyl methacrylate) copolymer (Xibond, (R)). The compatibilization effect of green composites were assessed by FTIR. The addition of all four compatibilizers improved the ductile mechanical and thermal properties of the composites. The morphology analysis revealed an improvement of interfacial adhesion of the CSF particles into the PLA matrix. In particular, ECO and MCO composites showed a roughness with long filaments in their morphology which plays a crucial role in improving the ductile properties highly. The elongation at break was 10 and 8 times higher using ECO and MCO, respectively, compared to uncompatibilized composite. Moreover, the composites manufactured showed low values (<9%) in the water uptake assay and a negligible compostability delay. The use of novel compatibilizers based on modified vegetable oils could mean an interesting proposal to obtain an entirely environmentally friendly composite with a remarkable ductile property., This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/ 501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing rheological performance of unsaturated polyester resin with biobased reactive diluents: A comprehensive analysis of viscosity and thermomechanical properties

  • Grimalt, J.
  • Frattini, L.
  • Carreras, P.
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] Bio-based reactive diluents (RD) have been explored as alternative to styrene (STY) in unsaturated polyester resin (UPR). Among the different candidates, acrylated epoxidized soybean oil (AESO) and epoxidized linseed oil (ELO) stand out as triglyceride derivatives. Aditionally, methyl methacrylate (MMA), trimethylolpropane triacrylate (TMPTA) with acrylic functionality, limonene (LIM), and cinnamates (CINN), has been tested in different percentages. Firstly, their efficiency in viscosity reduction has been studied. Best results were obtained after the addition of MMA, LIM, and CINN at 5 wt%. These RD achieve a viscosity reduction of 48.9 %, 76.7 %, and 22.9 %, respectively, compared to the reference sample. The industrial utilization of CINN as RD is impeded by its reactivity, as has been evidenced by its prolonged reaction time (24 min) and low reaction enthalpy. The thermo-mechanical properties studied through flexural tests, Shore D hardness, Charpy¿s Impact test, and heat deflection temperature (HDT), show that the developed UPRs exhibit a decrease in resistant mechanical properties while doubling their ductility by using LIM and MMA as bio-based RD (1.88 and 2.15 kJ m¿ 2 , respectively). The HDT study results demonstrate a certain level of thermal stability when MMA is employed (56 ¿C), which is 15 % lower in the case of LIM. Therefore, it is observed that UPRs with bio-based RD exhibit balanced and improved thermo-mechanical properties in terms of ductility and strength, especially with the use of a 5 wt % of LIM and MMA., This work has been developed in the context of EOCENE project (Circular Economy in the Thermostable Composites Industry) supported by the Ministry of Science and Innovation of Spain through the Misiones Ciencia e Innovacion" ¿ program in its 2019 call. The program Misiones is managed by the Center for Industrial Technological Development (CDTI), and is co-founded with FEDER funds through the Plurirregional Operational Program of Spain 2014 2020 (POPE). On the other hand, the UPV would like to thank the funding received by Ministry of Science and Innovation of Spain through the Retos de la Sociedad . Project references: PID2020- 119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Epoxidized Brazil Nut Oil as a Promising Plasticizing Agent for PLA

  • Perez-Nakai, Aina
  • Lerma-Canto, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Ferri, J.M|||0000-0002-1269-4973
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] This work evaluates for the first time the potential of an environmentally friendly plasticizer derived from epoxidized Brazil nut oil (EBNO) for biopolymers, such as poly(lactic acid) (PLA). EBNO was used due to its high epoxy content, reaching an oxirane oxygen content of 4.22% after 8 h of epoxidation for a peroxide/oil ratio of 2:1. Melt extrusion was used to plasticize PLA formulations with different EBNO contents in the range of 0-10 phr. The effects of different amounts of EBNO in the PLA matrix were studied by performing mechanical, thermal, thermomechanical, and morphological characterizations. The tensile test demonstrated the feasibility of EBNO as a plasticizer for PLA by increasing the elongation at break by 70.9% for the plasticized PLA with 7.5 phr of EBNO content in comparison to the unplasticized PLA. The field-emission scanning electron microscopy (FESEM) of the fractured surfaces from the impact tests showed an increase in porosity and roughness in the areas with EBNO addition, which was characteristic of ductile failure. In addition, a disintegration test was performed, and no influence on the PLA biodegradation process was observed. The overall results demonstrate the ability of EBNO to compete with other commercial plasticizers in improving the ductile properties of PLA., This research work was funded by the Ministry of Science and Innovation, ¿Retos de la Sociedad¿, project references: PID2020-119142RA-I00. I.D.-C. would like to thank the Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and the Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Hacia una economía circular: revalorización de productos de la semilla de salvia hispanica L. en el sector de los biopolímeros

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
[ES] La producción masiva de plásticos ha generado graves problemas medioambientales, ya que su lenta degradación y alta persistencia en el medio ambiente causa la acumulación de residuos plásticos en los océanos y tierras. Como respuesta, se está llevando a cabo una búsqueda activa de alternativas más sostenibles, incluyendo biopolímeros, materiales compostables y biodegradables, polímeros reciclados y materiales biológicos. Se están desarrollando nuevas tecnologías para la producción de envases y productos que sean más sostenibles y reciclables, y se están promoviendo iniciativas de educación y concienciación para reducir el consumo y fomentar el reciclaje. La búsqueda de alternativas sostenibles es una prioridad urgente para abordar los impactos ambientales de los plásticos. La semilla de chía tiene un gran potencial en el campo de los biopolímeros debido a su alto contenido de ácidos grasos poliinsaturados (alrededor de un 30% en peso de la semilla) y cuya harina de chía está formada por proteínas, mucílago, carbohidratos y residuos lignocelulósicos principalmente. Estos componentes pueden ser utilizados para producir biopolímeros naturales y biodegradables, que pueden ser una alternativa más sostenible a los polímeros sintéticos tradicionales. La presente tesis doctoral evalúa la capacidad de emplear la semilla de chía como recurso renovable funcional en el campo de los biopolímeros. Tras un proceso de extracción se evalúa la posibilidad de modificar químicamente los ácidos grasos poliisaturados presentes en los ácidos grasos del aceite de chía. Por tanto, uno de los primeros objetivos marcados es la optimización de un proceso como la epoxidación del aceite de chía, no realizada en la comunidad científica hasta el momento. El desarrollo de este aceite de chía epoxidado (ECO) permite su posterior testado como plastificante de origen bio en biopolímeros intrínsecamente rígidos y frágiles como el PLA. Además, este mismo aceite epoxidado puede emplearse como compatibilizante entre moléculas apolares, como son las matrices poliméricas, y las cargas lignocelulósicas, como la propia harina de chía, introducidas para mitigar el impacto ambiental y aumentar la revalorización de subproductos de la semilla de chía. El empleo de ECO como compatibilizante se ha llevado a cabo con matrices basadas en PLA y biopolietileno (Bio-HDPE), desarrollando biopolímeros biodegradables y no biodegradables para diferentes sectores. También se ha desarrollado un aceite de chía maleinizado (MCO). La introducción de esta molécula de anhídrido maleico en el triglicérido le permite tener una elevada reactividad apta para el desarrollo de un nuevo bioplastificante, como se ha demostrado mediante la introducción en matrices de PLA, e incluso para su empleo como endurecedores de resinas de tipo epoxi. Se lleva a cabo por primera vez el desarrollo de una resina termoestable basada al 100 % en ECO como base de la resina epoxy y MCO como endurecedor bio. Finalmente, el aceite de chía también puede emplearse como materia prima para la obtención de glicolípidos con comportamiento de cristal líquido. Estos glicolípidos serán estudiados para conocer su potencial como surfactante en aplicaciones cosméticas o en aplicaciones energéticas para la conversión y almacenamiento de energía en presencia de compuestos que interaccionan con la luz solar. Por tanto, las investigaciones desarrolladas en la presente tesis doctoral han permitido explorar por primera vez el empleo de la semilla de chía como fuente de materia prima renovable para la obtención de compuestos activos aplicables al sector de los biopolímeros. Para ello se han desarrollado nuevos compatibilizantes y plastificantes mediante el desarrollo del ECO y del MCO, la revalorización de la harina de chía mediante su adición en matrices poliméricas desarrollando nuevos WPC y desarrollando, por primera vez, una resina termoestable originaria al 100% de la semilla de la chía., [CA] La producció massiva de plàstics ha generat greus problemes mediambientals, ja que la seua lenta degradació i alta persistència en el medi ambient causa l'acumulació de residus plàstics en els oceans i terres. Com a resposta, s'està duent a terme una cerca activa d'alternatives més sostenibles, incloent-hi biopolímers, materials compostables i biodegradables, polímers reciclats i materials biològics. S'estan desenvolupant noves tecnologies per a la producció d'envasos i productes que siguen més sostenibles i reciclables, i s'estan promovent iniciatives d'educació i conscienciació per a reduir el consum i fomentar el reciclatge. La cerca d'alternatives sostenibles és una prioritat urgent per a abordar els impactes ambientals dels plàstics. La llavor de xia té un gran potencial en el camp dels biopolímers a causa del seu alt contingut d'àcids grassos poliinsaturats (al voltant d'un 30% en pes de la llavor) i la farina de xia de la qual està formada per proteïnes, mucílag, carbohidrats i residus lignocelulósics principalment. Aquests components poden ser utilitzats per a produir biopolímers naturals i biodegradables, que poden ser una alternativa més sostenible als polímers sintètics tradicionals. La present tesi doctoral avalua la capacitat d'emprar la llavor de xia com a recurs renovable funcional en el camp dels biopolímers. Després d'un procés d'extracció s'avalua la possibilitat de modificar químicament els àcids grassos poliisaturats presents en els àcids grassos de l'oli de xia. Per tant, un dels primers objectius marcats és l'optimització d'un procés com l'epoxidació de l'oli de xia, no realitzada en la comunitat científica fins al moment. El desenvolupament d'aquest oli de xia epoxidado (ECO) permet el seu posterior testat com a plastificant d'origen bio en biopolímers intrínsecament rígids i fràgils com el PLA. A més, aquest mateix oli epoxidado pot emprar-se com compatibilizant entre molècules apolares, com són les matrius polimèriques, i les càrregues lignocelulósiques, com la pròpia farina de xia, introduïdes per a mitigar l'impacte ambiental i augmentar la revaloració de subproductes de la llavor de xia. L'ocupació d'ECO com compatibilizant s'ha dut a terme amb matrius basades en PLA i biopolietileno (Bio-HDPE), desenvolupant biopolímers biodegradables i no biodegradables per a diferents sectors. També s'ha desenvolupat un oli de xia maleinizado (MCO). La introducció d'aquesta molècula d'anhídrid maleic en el triglicèrid li permet tindre una elevada reactivitat apta per al desenvolupament d'un nou bioplastificant, com s'ha demostrat mitjançant la introducció en matrius de PLA, i fins i tot per al seu ús com a enduridors de resines de tipus epoxi. Es duu a terme per primera vegada el desenvolupament d'una resina termoestable basada al 100% en ECO com a base de la resina epoxi i MCO com a enduridor bio. Finalment, l'oli de xia també pot emprar-se com a matèria primera per a l'obtenció de glicolípids amb comportament de cristall líquid. Aquests glicolípids seran estudiats per a conéixer el seu potencial com a surfactant en aplicacions cosmètiques o en aplicacions energètiques per a la conversió i emmagatzematge d'energia en presència de compostos que interaccionen amb la llum solar. Per tant, les investigacions desenvolupades en la present tesi doctoral han permés explorar per primera vegada l'ús de la llavor de xia com a font de matèria primera renovable per a l'obtenció de compostos actius aplicables al sector dels biopolímers. Per a això s'han desenvolupat nous compatibilizants i plastificants mitjançant el desenvolupament del ECO i del MCO, la revaloració de la farina de xia mitjançant la seua addició en matrius polimèriques desenvolupant nous WPC i desenvolupant, per primera vegada, una resina termoestable originària al 100% de la llavor de la xia., [EN] The mass production of plastics has led to serious environmental problems, as their slow degradation and high persistence in the environment causes the accumulation of plastic waste in oceans and land. In response, there is an active search for more sustainable alternatives, including biopolymers, compostable and biodegradable materials, recycled polymers and bio-based materials. New technologies are being developed for the production of packaging and products that are more sustainable and recyclable, and education and awareness initiatives are being promoted to reduce consumption and encourage recycling. The search for sustainable alternatives is an urgent priority to address the environmental impacts of plastics. Chia seed has great potential in the field of biopolymers due to its high content of polyunsaturated fatty acids (around 30% by weight of the seed) and chia flour is mainly composed of proteins, mucilage, carbohydrates and lignocellulosic residues. These components can be used to produce natural and biodegradable biopolymers, which can be a more sustainable alternative to traditional synthetic polymers. This doctoral thesis evaluates the capacity of using chia seed as a functional renewable resource in the field of biopolymers. After an extraction process, the possibility of chemically modifying the polyunsaturated fatty acids present in the fatty acids of chia oil is evaluated. Therefore, one of the first objectives is the optimisation of a process such as the epoxidation of chia oil, which has not been carried out in the scientific community until now. The development of this epoxidised chia oil (ECO) allows its subsequent testing as a bio-based plasticiser in intrinsically rigid and fragile biopolymers such as PLA. Furthermore, this same epoxidised oil can be used as a compatibiliser between apolar molecules, such as polymeric matrices, and lignocellulosic fillers, such as chia flour itself, introduced to mitigate the environmental impact and increase the revaluation of chia seed by-products. The use of ECO as a compatibiliser has been carried out with PLA and biopolyethylene (Bio-HDPE) based matrices, developing biodegradable and non-biodegradable biopolymers for different sectors. A maleinised chia oil (MCO) has also been developed. The introduction of this maleic anhydride molecule in the triglyceride allows it to have a high reactivity suitable for the development of a new bioplasticiser, as has been demonstrated by introducing it into PLA matrices, and even for use as hardeners in epoxy-type resis. For the first time, the development of a thermosetting resin based 100% on ECO as the base of the epoxy resin and MCO as the bio hardener is carried out. Finally, chia oil can also be used as a raw material to obtain glycolipids with liquid crystal behaviour. These glycolipids will be studied for their potential as surfactants in cosmetic applications or in energy applications for energy conversion and storage in the presence of compounds that interact with sunlight. Therefore, the research carried out in this doctoral thesis has made it possible to explore for the first time the use of chia seeds as a source of renewable raw material for obtaining active compounds applicable to the biopolymer sector. To this end, new compatibilisers and plasticisers have been developed through the development of ECO and MCO, the revaluation of chia flour by adding it to polymeric matrices, developing new WPCs and developing, for the first time, a thermosetting resin made from 100% chia seed., This research work was funded by the Ministry of Science and Innovation-”Retos de la Sociedad”. Project reference: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019- SP20190013) and Generalitat Valenciana (GVA) and the European Social Found (ESF), for his FPI grant (ACIF/2020/233) and the mobility grant (CIBEFP/2021/53). The authors from INMA greatly appreciate financial support from projects of the Spanish Government PGC2018-093761-B-C31 [MCIU/AEI/FEDER, UE] and the Gobierno de Aragón/FEDER (research group E47_20R). Thanks are given to the nuclear magnetic resonance, mass spectrometry, and thermal analysis services of the INMA (Univ. Zaragoza-CSIC)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a novel epoxy resin based on epoxidized chia oil as matrix and maleinized chia oil as bio-renewable crosslinker

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Perez-Nakai, Aina
  • Torres-Roca, Elena
[EN] In this work novel thermosetting resins with high bio-based content have been developed derived from chia seed oil (CO). Epoxidized chia seed oil (ECO) was used as bio-based epoxy matrix with different mixtures of crosslinker agents, that is, methyl nadic anhydride (MNA) as petroleum-derived and maleinized chia seed oil (MCO) as bio-based crosslinker. The chemically modified oils from CO, that is, ECO and MCO, and MNA were analyzed by titration and FT-IR. Additional 1H NMR analysis was performed to characterize MCO structure. Two different behaviors were observed using the mixtures of crosslinkers. On one hand, MNA increases the rigidity with bio-based content of 54.2%. On the other hand, the addition of MCO provides higher ductility with bio-based content up to 98%. The same trend was observed by DMTA analysis. The novel cured resins were successfully crosslinked as demonstrated by the mechanical properties, FT-IR analyses, and gel content. Based on the results, it is concluded that MCO presents higher reactivity than MNA, decreasing curing time with possible energy saving at industrial level. In general, the results showed that adding the appropriate amount of MCO, green thermosetting resins with the desired thermal and mechanical properties can be manufactured with high bio-based content., Ministry of Science and Innovation,Grant/Award Number: PID2020-119142RA-I00; Universitat Politecnica de Valencia, Grant/Award Number: PAID-2019-SP20190013; Generalitat Valenciana,Grant/Award Number: ACIF/2020/233. This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Study and Mathematical Modeling of a Nanofiltration Membrane System for the Recovery of Polyphenols from Wine Lees

  • López-Borrell, Alexis
  • López Pérez, Maria Fernanda|||0000-0002-5815-9212
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
[EN] The winemaking process in Spain generates a significant amount of wastes such as wine lees. Currently, the nanofiltration process is a viable technique for the revalorization of compounds from wastes. In this aspect, this technique can be used for the recovery of compounds, such as polyphenols, as well as active principles widely used in industries, such as pharmaceuticals or cosmetics. Polyphenols are found in acceptable amounts in wine lees wastes and it is interesting to study the nanofiltration process viability to recover them. In order to study this possibility, it is necessary to determine the choice of the best membrane to use and the effect of operational parameters such as pressure, temperature, cross-flow rates, and concentration. In addition, it is important to be able to develop a mathematical model that can help in the future design of lees treatment plants. The treatment of red wine lees to concentrate polyphenols has been studied in a laboratory plant using different membranes (RO and NF) at different pressures (4.5, 9.5, and 14.5 bar), different temperatures (293, 303, and 308 K), and two concentrations (2100 and 1100 mg tyrosol eq center dot L-1). The results have been encouraging to consider nanofiltration as a viable technique for the treatment and revalorization of this waste. The most suitable membrane has been the NF270, in which 96% rejection rates have been obtained, with a flux of 30 L center dot h(-1)center dot m(-2). Moreover, in this study, the Spiegler-Kedem model (SKM) was used to calculate mass transfer constants and permeabilities. Suitable adjustments of these parameters were obtained to validate this mathematical model. For this reason, the SKM might be used in future studies to continue in the research work of the treatment of wine lees wastes., This research work was funded by the Ministry of Science and Innovation, "Retos de la Sociedad". Project reference: PID2020-119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epoxidized and Maleinized Hemp Oil to Develop Fully Bio-Based Epoxy Resin Based on Anhydride Hardeners

  • Lerma-Canto, Alejandro
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] The present work aims to develop thermosetting resins using epoxidized hemp oil (EHO) as a bio-based epoxy matrix and a mixture of methyl nadic anhydride (MNA) and maleinized hemp oil (MHO) in different ratios as hardeners. The results show that the mixture with only MNA as a hardener is characterized by high stiffness and brittleness. In addition, this material is characterized by a high curing time of around 170 min. On the other hand, as the MHO content in the resin increases, the mechanical strength properties decrease and the ductile properties increase. Therefore, it can be stated that the presence of MHO confers flexible properties to the mixtures. In this case, it was determined that the thermosetting resin with balanced properties and high bio-based content contains 25% MHO and 75% MNA. Specifically, this mixture obtained a 180% higher impact energy absorption and a 195% lower Young's modulus than the sample with 100% MNA. Also, it has been observed that this mixture has significantly shorter times than the mixture containing 100% MNA (around 78 min), which is of great concern at an industrial level. Therefore, thermosetting resins with different mechanical and thermal properties can be obtained by varying the MHO and MNA content., This research was funded by MCIN/AEI/ 10.13039/501100011033 through the PID-AEI Project (grants PID2020-119142RA-I00 and PID2021-123753NA-C33) and the TED-AEI Project (grants TED2021-129920A-C43 and TED2021-131762A-100) and, as appropriate, by ¿ERDF A way of making Europe¿, by the ¿European Union¿ or by the ¿European Union NextGenerationEU/PRTR¿. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing novel thermoset materials from Brazil nut oil: Curing, thermal and mechanical properties

  • Perez-Nakai, Aina
  • Lerma-Canto, Alejandro
  • Trejo-Machín, Acerina
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Ferri, J.M|||0000-0002-1269-4973
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] The present work describes, for the first time, the chemical modification and characterization of epoxy resins derived from Brazil nut oil (BNO). The development of a bio-based resin has been carried out by chemically modifying BNO, resulting in epoxidized Brazil nut oil (EBNO). Moreover, through a maleinization process, a crosslinker based on maleinized Brazil nut oil (MBNO) has been employed.Analysis using techniques like iodine value (IV) and oxirane oxygen content (Oo) indicate successful chemical modification. FTIR analysis confirms the presence of reactive functional groups in both EBNO and MBNO, which are responsible for resin crosslinking. Mechanical testing of the different bio-resins developed shows that, in the cured resins, flexural strength and modulus decrease with increasing MBNO content, indicating improved flexibility due to the introduction of MBNO as a crosslinker. Thermal analysis using differential scanning calorimetry (DSC) reveals exothermic peaks corresponding to resin curing appearing at progressively lower temperatures. Therefore, this study successfully modifies BNO and demonstrates its effectiveness as a precursor to develop bio-based epoxy resins. The resulting resins exhibit improved ductile and thermal properties, making them suitable for various applications requiring low mechanical stresses., This research work was funded by the Ministry of Science and Innovation Retos de la Sociedad . Project references: PID2020-119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical Characterization of Novel Epoxidized Vegetable Oil from Chia Seed Oil

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Lerma-Canto, Alejandro
[EN] In this study, a novel epoxidized vegetable oil (EVO) from chia seed oil (CSO) has been obtained, with the aim to be employed in a great variety of green products related to the polymeric industry, as plasticizers and compatibilizers. Previous to the epoxidation process characterization, the fatty acid (FA) composition of CSO was analyzed using gas chromatography (GC). Epoxidation of CSO has been performed using peracetic acid formed in situ with hydrogen peroxide and acetic acid, applying sulfuric acid as catalyst. The effects of key parameters as temperature (60, 70, and 75 degrees C), the molar ratio of hydrogen peroxide:double bond (H2O2:DB) (0.75:1.0 and 1.50:1.0), and reaction time (0-8 h) were evaluated to obtain the highest relative oxirane oxygen yield (Y-oo). The evaluation of the epoxidation process was carried out through iodine value (IV), oxirane oxygen content (O-o), epoxy equivalent weight (EEW), and selectivity (S). The main functional groups were identified by means of FTIR and H-1 NMR spectroscopy. Physical properties were compared in the different assays. The study of different parameters showed that the best epoxidation conditions were carried out at 75 degrees C and H2O2:DB (1.50:1), obtaining an O-o value of 8.26% and an EEW of 193 (g center dot eq(-1)). These high values, even higher than those obtained for commercial epoxidized oils such as soybean or linseed oil, show the potential of the chemical modification of chia seed oil to be used in the development of biopolymers., This research work was funded by the Ministry of Science and Innovation-"Retos de la Sociedad". Project reference: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Natural and Synthetic Fabrics for the Treatment of Complex Wastes

  • López-Borrell, Alexis
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Cardona, S. C.|||0000-0002-2882-3098
  • López Pérez, Maria Fernanda|||0000-0002-5815-9212
[EN] In the present study, nine fabrics have been tested for brackish water treatment with the aim of industrial application under the concept of zero liquid discharge (ZLD). Moisture content was determined, where it was observed that the lignocellulosic fabrics had a moisture content ranging from 2.5 to 8.5%. The wetting contact angle showed that the flax with polylactic acid (LPLA) was the most hydrophobic. The determination of the liquid absorption capacity showed that, of the synthetic fabrics, the one with the highest absorption, both in distilled water and in brackish water, was the polyester (PES) fabric with an absorption of 816% compared to its initial weight. In the natural fabrics, the highest absorption capacity was shown by the wet-laid without treatment (WL-WT) fabric for both distilled water and brackish water, although it required several cycles of operation to maintain this stable absorption. Exposure to brackish water improved the absorption capacity of all samples. Mechanical and thermal characterization showed that the synthetic fabrics were more resistant than the natural fabrics, although they may compete in terms of applicability. The capillarity study showed that the most hydrophilic fabrics completed the test the fastest. Finally, the composting degradation test showed that those fabrics with polylactic acid (PLA) content degraded faster in the first 14 days and thereafter the degradation of the lignocellulosic content showed a slower degradation until 112 days. The Bam fabric did not degrade during the course of the experiment., This research work was funded by the Ministry of Science and Innovation, "Retos de la Sociedad". Project reference: PID2020-119142RA-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vapor Pressure and Evaporation Studies of Saline Solutions on Natural and Synthetic Fabrics for Industrial Water Treatment

  • López-Borrell, Alexis
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Cardona, S. C.|||0000-0002-2882-3098
  • López Pérez, Maria Fernanda|||0000-0002-5815-9212
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] In the present paper, we have conducted a comprehensive analysis of vapor pressures of both saturated and unsaturated solutions, alongside a study of evaporation using synthetic and natural fabrics for industrial applications in brackish water treatment under zero liquid discharge (ZLD) philosophy. By determining the vapor pressures of saturated solutions, we obtained results consistent with those of other researchers, extending the range of tested temperatures from 1 to 50 ¿C and successfully fitting the parameters of an Antoine-type equation. Similarly, positive results were achieved for unsaturated solutions, where various parameters of different equations accounting for the salt concentration were estimated, simplifying the fitting procedure. Natural evaporation tests from water surfaces using saturated solutions revealed that salts with higher associated vapor pressures exhibit higher evaporation rates. On the other hand, hydrated salts retain water in their structure and are significantly affected by ambient humidity. Evaporation studies on natural and synthetic fabrics with saturated NaCl and CuSO4 ·5H2O solutions showed distinct behaviors. NaCl increased both the evaporation rate and salt deposition with each cycle. In contrast, CuSO4 ·5H2O reduced the absorption capacity by blocking the fabric¿s structure, decreasing the evaporation efficiency over successive cycles., This research work was funded by the Ministry of Science and Innovation, Retos de la Sociedad . Project reference: PID2020-119142RA-I00.