Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel compatibilizers and plasticizers developed from epoxidized and maleinized chia oil in composites based on PLA and chia seed flour

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] Novel compatibilizers and plasticizers derived from epoxidized chia seed oil (ECO) and maleinized chia seed oil (MCO) have been applied in composites based on poly(lactic acid) (PLA) and 15 wt% chia seed flour (CSF). Results obtained have been compared to conventional silane coupling agent, (3-glycidyloxypropyl) trimethoxysilane (GPS), and a petroleum-based compatibilizer, poly(styrene-co-glycidyl methacrylate) copolymer (Xibond, (R)). The compatibilization effect of green composites were assessed by FTIR. The addition of all four compatibilizers improved the ductile mechanical and thermal properties of the composites. The morphology analysis revealed an improvement of interfacial adhesion of the CSF particles into the PLA matrix. In particular, ECO and MCO composites showed a roughness with long filaments in their morphology which plays a crucial role in improving the ductile properties highly. The elongation at break was 10 and 8 times higher using ECO and MCO, respectively, compared to uncompatibilized composite. Moreover, the composites manufactured showed low values (<9%) in the water uptake assay and a negligible compostability delay. The use of novel compatibilizers based on modified vegetable oils could mean an interesting proposal to obtain an entirely environmentally friendly composite with a remarkable ductile property., This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/ 501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-responsive bent-core liquid crystals as candidates for energy conversion and storage

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Zulkhairi, Iman
  • Pintre, Inmaculada
  • Kamalul Aripin, Nurul Fadhilah
  • Ros, Blanca
  • Martinez-Felipe, Alfonso
[EN] We have assessed the potential of light-responsive bent-core liquid crystals as candidate materials for energy conversion and storage applications. Samples comprise two chromophore bent-core compounds containing either one (IP33) or two (IP31) azobenzene groups, and their 5% (molar) mixtures with one non-chromophore bent-core compound (NG75), which was also measured as a reference material. The pristine compounds and their mixtures were introduced in thin transparent Indium Tin Oxide (ITO) cells, and were characterised by polarised optical microscopy, UV-visible spectrophotometry, impedance spectroscopy, and ferroelectric analysis, under different conditions of electrical fields and UV irradiation. All materials display smectic C polar phases (SmCP) except IP31, which forms columnar phases (Col), and IP33, IP31 and their mixtures exhibit light-responsiveness when irradiated at 365 nm due to reversible trans-to-cis photoisomerisation of the azobenzene units. All the bent-core based materials exhibit, at least, two dielectric relaxations, associated with different modes of molecular reorientation under weak alternating electrical fields (1 Vrms), as well as ferroelectric response that leads to permanent polarisation under the application of strong alternating fields (B75 kV cm¿1) at frequencies associated with the Goldstone-mode (1 Hz). Samples show considerable conductivity values and relaxor behaviour for liquid crystals, which can be tuned by application of UV light. In addition, we have induced in IP31 isothermal phase transitions from columnar to smectic phases (via the isotropic melt), by a combination of light and electrical stimuli. Our results confirm the potential of these bent-core compounds as light-harvesters for energy applications., IDC would like to thank the Universitat Politecnica de Valencia (UPV), for the FPI grant (PAID-2019-SP20190013), the Generalitat Valenciana (GVA) and the European Social Fund (ESF), for the FPI grant (ACIF/2020/233) and the mobility grant (CIBEFP/2021/53). NFKA would like to thank Universiti Teknologi MARA (UiTM) for sponsoring her academic sabbatical leave and allowing her to work on this project. AMF would like to thank the Carnegie Trust for the Universities of Scotland, for the Research Incentive Grant RIG008586, the Royal Society and Specac Ltd., for the Research Grant RGS\R1\201397, the Royal Society of Chemistry for the award of a mobility grant (M19-0000), and the Scottish Government and the Royal Society of Edinburgh for the award of a SAPHIRE project. The authors from INMA greatly appreciate financial support from projects of the Spanish Government PGC2018-093761-B-C31 [MCIU/AEI/FEDER, UE] and the Gobierno de Aragon/FEDER (research group E47_20R). Thanks are given to the nuclear magnetic resonance, mass spectrometry, and thermal analysis services of the INMA (Univ. Zaragoza-CSIC)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a novel epoxy resin based on epoxidized chia oil as matrix and maleinized chia oil as bio-renewable crosslinker

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Perez-Nakai, Aina
  • Torres-Roca, Elena
[EN] In this work novel thermosetting resins with high bio-based content have been developed derived from chia seed oil (CO). Epoxidized chia seed oil (ECO) was used as bio-based epoxy matrix with different mixtures of crosslinker agents, that is, methyl nadic anhydride (MNA) as petroleum-derived and maleinized chia seed oil (MCO) as bio-based crosslinker. The chemically modified oils from CO, that is, ECO and MCO, and MNA were analyzed by titration and FT-IR. Additional 1H NMR analysis was performed to characterize MCO structure. Two different behaviors were observed using the mixtures of crosslinkers. On one hand, MNA increases the rigidity with bio-based content of 54.2%. On the other hand, the addition of MCO provides higher ductility with bio-based content up to 98%. The same trend was observed by DMTA analysis. The novel cured resins were successfully crosslinked as demonstrated by the mechanical properties, FT-IR analyses, and gel content. Based on the results, it is concluded that MCO presents higher reactivity than MNA, decreasing curing time with possible energy saving at industrial level. In general, the results showed that adding the appropriate amount of MCO, green thermosetting resins with the desired thermal and mechanical properties can be manufactured with high bio-based content., Ministry of Science and Innovation,Grant/Award Number: PID2020-119142RA-I00; Universitat Politecnica de Valencia, Grant/Award Number: PAID-2019-SP20190013; Generalitat Valenciana,Grant/Award Number: ACIF/2020/233. This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical Characterization of Novel Epoxidized Vegetable Oil from Chia Seed Oil

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Lerma-Canto, Alejandro
[EN] In this study, a novel epoxidized vegetable oil (EVO) from chia seed oil (CSO) has been obtained, with the aim to be employed in a great variety of green products related to the polymeric industry, as plasticizers and compatibilizers. Previous to the epoxidation process characterization, the fatty acid (FA) composition of CSO was analyzed using gas chromatography (GC). Epoxidation of CSO has been performed using peracetic acid formed in situ with hydrogen peroxide and acetic acid, applying sulfuric acid as catalyst. The effects of key parameters as temperature (60, 70, and 75 degrees C), the molar ratio of hydrogen peroxide:double bond (H2O2:DB) (0.75:1.0 and 1.50:1.0), and reaction time (0-8 h) were evaluated to obtain the highest relative oxirane oxygen yield (Y-oo). The evaluation of the epoxidation process was carried out through iodine value (IV), oxirane oxygen content (O-o), epoxy equivalent weight (EEW), and selectivity (S). The main functional groups were identified by means of FTIR and H-1 NMR spectroscopy. Physical properties were compared in the different assays. The study of different parameters showed that the best epoxidation conditions were carried out at 75 degrees C and H2O2:DB (1.50:1), obtaining an O-o value of 8.26% and an EEW of 193 (g center dot eq(-1)). These high values, even higher than those obtained for commercial epoxidized oils such as soybean or linseed oil, show the potential of the chemical modification of chia seed oil to be used in the development of biopolymers., This research work was funded by the Ministry of Science and Innovation-"Retos de la Sociedad". Project reference: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).