Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel compatibilizers and plasticizers developed from epoxidized and maleinized chia oil in composites based on PLA and chia seed flour

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] Novel compatibilizers and plasticizers derived from epoxidized chia seed oil (ECO) and maleinized chia seed oil (MCO) have been applied in composites based on poly(lactic acid) (PLA) and 15 wt% chia seed flour (CSF). Results obtained have been compared to conventional silane coupling agent, (3-glycidyloxypropyl) trimethoxysilane (GPS), and a petroleum-based compatibilizer, poly(styrene-co-glycidyl methacrylate) copolymer (Xibond, (R)). The compatibilization effect of green composites were assessed by FTIR. The addition of all four compatibilizers improved the ductile mechanical and thermal properties of the composites. The morphology analysis revealed an improvement of interfacial adhesion of the CSF particles into the PLA matrix. In particular, ECO and MCO composites showed a roughness with long filaments in their morphology which plays a crucial role in improving the ductile properties highly. The elongation at break was 10 and 8 times higher using ECO and MCO, respectively, compared to uncompatibilized composite. Moreover, the composites manufactured showed low values (<9%) in the water uptake assay and a negligible compostability delay. The use of novel compatibilizers based on modified vegetable oils could mean an interesting proposal to obtain an entirely environmentally friendly composite with a remarkable ductile property., This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). J. Gomez-Caturla wants to thank Generalitat Valenciana-GVA, for his FPI grant (ACIF/2021/185) and grant FPU20/01732 funded by MCIN/AEI/10.13039/ 501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Epoxidized Brazil Nut Oil as a Promising Plasticizing Agent for PLA

  • Perez-Nakai, Aina
  • Lerma-Canto, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Ferri, J.M|||0000-0002-1269-4973
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] This work evaluates for the first time the potential of an environmentally friendly plasticizer derived from epoxidized Brazil nut oil (EBNO) for biopolymers, such as poly(lactic acid) (PLA). EBNO was used due to its high epoxy content, reaching an oxirane oxygen content of 4.22% after 8 h of epoxidation for a peroxide/oil ratio of 2:1. Melt extrusion was used to plasticize PLA formulations with different EBNO contents in the range of 0-10 phr. The effects of different amounts of EBNO in the PLA matrix were studied by performing mechanical, thermal, thermomechanical, and morphological characterizations. The tensile test demonstrated the feasibility of EBNO as a plasticizer for PLA by increasing the elongation at break by 70.9% for the plasticized PLA with 7.5 phr of EBNO content in comparison to the unplasticized PLA. The field-emission scanning electron microscopy (FESEM) of the fractured surfaces from the impact tests showed an increase in porosity and roughness in the areas with EBNO addition, which was characteristic of ductile failure. In addition, a disintegration test was performed, and no influence on the PLA biodegradation process was observed. The overall results demonstrate the ability of EBNO to compete with other commercial plasticizers in improving the ductile properties of PLA., This research work was funded by the Ministry of Science and Innovation, ¿Retos de la Sociedad¿, project references: PID2020-119142RA-I00. I.D.-C. would like to thank the Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and the Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Contribution to a Circular Economy Model: From LignocellulosicWastes from the Extraction of Vegetable Oils to the Development of a New Composite

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Perez-Nakai, Aina
  • Lerma-Cantó, Alejandro
[EN] The present works focuses on the development of a novel fully bio-based composite using a bio-based high-density polyethylene (Bio-HDPE) obtained from sugar cane as matrix and a by-product of extraction of chia seed oil (CO) as filler, with the objective of achieving a circular economy model. The research aims to revalorize an ever-increasing waste stream produced by the growing interest in vegetable oils. From the technical point of view, the chia seed flour (CSF) was chemically modified using a silane treatment. This treatment provides a better interfacial adhesion as was evidenced by the mechanical and thermal properties as well as field emission scanning electron microscopy (FESEM). The effect of silane treatment on water uptake and disintegration rate was also studied. On the other hand, in a second stage, an optimization of the percentage of treated CSF used as filler was carried out by a complete series of mechanical, thermal, morphological, colour, water absorption and disintegration tests with the aim to evaluate the new composite developed using chia by-products. It is noteworthy as the disintegration rate increased with the addition of CSF filler, which leads to obtain a partially biodegradable wood plastic composite (WPC) and therefore, becoming more environmentally friendly., I. D-C wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Hacia una economía circular: revalorización de productos de la semilla de salvia hispanica L. en el sector de los biopolímeros

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
[ES] La producción masiva de plásticos ha generado graves problemas medioambientales, ya que su lenta degradación y alta persistencia en el medio ambiente causa la acumulación de residuos plásticos en los océanos y tierras. Como respuesta, se está llevando a cabo una búsqueda activa de alternativas más sostenibles, incluyendo biopolímeros, materiales compostables y biodegradables, polímeros reciclados y materiales biológicos. Se están desarrollando nuevas tecnologías para la producción de envases y productos que sean más sostenibles y reciclables, y se están promoviendo iniciativas de educación y concienciación para reducir el consumo y fomentar el reciclaje. La búsqueda de alternativas sostenibles es una prioridad urgente para abordar los impactos ambientales de los plásticos. La semilla de chía tiene un gran potencial en el campo de los biopolímeros debido a su alto contenido de ácidos grasos poliinsaturados (alrededor de un 30% en peso de la semilla) y cuya harina de chía está formada por proteínas, mucílago, carbohidratos y residuos lignocelulósicos principalmente. Estos componentes pueden ser utilizados para producir biopolímeros naturales y biodegradables, que pueden ser una alternativa más sostenible a los polímeros sintéticos tradicionales. La presente tesis doctoral evalúa la capacidad de emplear la semilla de chía como recurso renovable funcional en el campo de los biopolímeros. Tras un proceso de extracción se evalúa la posibilidad de modificar químicamente los ácidos grasos poliisaturados presentes en los ácidos grasos del aceite de chía. Por tanto, uno de los primeros objetivos marcados es la optimización de un proceso como la epoxidación del aceite de chía, no realizada en la comunidad científica hasta el momento. El desarrollo de este aceite de chía epoxidado (ECO) permite su posterior testado como plastificante de origen bio en biopolímeros intrínsecamente rígidos y frágiles como el PLA. Además, este mismo aceite epoxidado puede emplearse como compatibilizante entre moléculas apolares, como son las matrices poliméricas, y las cargas lignocelulósicas, como la propia harina de chía, introducidas para mitigar el impacto ambiental y aumentar la revalorización de subproductos de la semilla de chía. El empleo de ECO como compatibilizante se ha llevado a cabo con matrices basadas en PLA y biopolietileno (Bio-HDPE), desarrollando biopolímeros biodegradables y no biodegradables para diferentes sectores. También se ha desarrollado un aceite de chía maleinizado (MCO). La introducción de esta molécula de anhídrido maleico en el triglicérido le permite tener una elevada reactividad apta para el desarrollo de un nuevo bioplastificante, como se ha demostrado mediante la introducción en matrices de PLA, e incluso para su empleo como endurecedores de resinas de tipo epoxi. Se lleva a cabo por primera vez el desarrollo de una resina termoestable basada al 100 % en ECO como base de la resina epoxy y MCO como endurecedor bio. Finalmente, el aceite de chía también puede emplearse como materia prima para la obtención de glicolípidos con comportamiento de cristal líquido. Estos glicolípidos serán estudiados para conocer su potencial como surfactante en aplicaciones cosméticas o en aplicaciones energéticas para la conversión y almacenamiento de energía en presencia de compuestos que interaccionan con la luz solar. Por tanto, las investigaciones desarrolladas en la presente tesis doctoral han permitido explorar por primera vez el empleo de la semilla de chía como fuente de materia prima renovable para la obtención de compuestos activos aplicables al sector de los biopolímeros. Para ello se han desarrollado nuevos compatibilizantes y plastificantes mediante el desarrollo del ECO y del MCO, la revalorización de la harina de chía mediante su adición en matrices poliméricas desarrollando nuevos WPC y desarrollando, por primera vez, una resina termoestable originaria al 100% de la semilla de la chía., [CA] La producció massiva de plàstics ha generat greus problemes mediambientals, ja que la seua lenta degradació i alta persistència en el medi ambient causa l'acumulació de residus plàstics en els oceans i terres. Com a resposta, s'està duent a terme una cerca activa d'alternatives més sostenibles, incloent-hi biopolímers, materials compostables i biodegradables, polímers reciclats i materials biològics. S'estan desenvolupant noves tecnologies per a la producció d'envasos i productes que siguen més sostenibles i reciclables, i s'estan promovent iniciatives d'educació i conscienciació per a reduir el consum i fomentar el reciclatge. La cerca d'alternatives sostenibles és una prioritat urgent per a abordar els impactes ambientals dels plàstics. La llavor de xia té un gran potencial en el camp dels biopolímers a causa del seu alt contingut d'àcids grassos poliinsaturats (al voltant d'un 30% en pes de la llavor) i la farina de xia de la qual està formada per proteïnes, mucílag, carbohidrats i residus lignocelulósics principalment. Aquests components poden ser utilitzats per a produir biopolímers naturals i biodegradables, que poden ser una alternativa més sostenible als polímers sintètics tradicionals. La present tesi doctoral avalua la capacitat d'emprar la llavor de xia com a recurs renovable funcional en el camp dels biopolímers. Després d'un procés d'extracció s'avalua la possibilitat de modificar químicament els àcids grassos poliisaturats presents en els àcids grassos de l'oli de xia. Per tant, un dels primers objectius marcats és l'optimització d'un procés com l'epoxidació de l'oli de xia, no realitzada en la comunitat científica fins al moment. El desenvolupament d'aquest oli de xia epoxidado (ECO) permet el seu posterior testat com a plastificant d'origen bio en biopolímers intrínsecament rígids i fràgils com el PLA. A més, aquest mateix oli epoxidado pot emprar-se com compatibilizant entre molècules apolares, com són les matrius polimèriques, i les càrregues lignocelulósiques, com la pròpia farina de xia, introduïdes per a mitigar l'impacte ambiental i augmentar la revaloració de subproductes de la llavor de xia. L'ocupació d'ECO com compatibilizant s'ha dut a terme amb matrius basades en PLA i biopolietileno (Bio-HDPE), desenvolupant biopolímers biodegradables i no biodegradables per a diferents sectors. També s'ha desenvolupat un oli de xia maleinizado (MCO). La introducció d'aquesta molècula d'anhídrid maleic en el triglicèrid li permet tindre una elevada reactivitat apta per al desenvolupament d'un nou bioplastificant, com s'ha demostrat mitjançant la introducció en matrius de PLA, i fins i tot per al seu ús com a enduridors de resines de tipus epoxi. Es duu a terme per primera vegada el desenvolupament d'una resina termoestable basada al 100% en ECO com a base de la resina epoxi i MCO com a enduridor bio. Finalment, l'oli de xia també pot emprar-se com a matèria primera per a l'obtenció de glicolípids amb comportament de cristall líquid. Aquests glicolípids seran estudiats per a conéixer el seu potencial com a surfactant en aplicacions cosmètiques o en aplicacions energètiques per a la conversió i emmagatzematge d'energia en presència de compostos que interaccionen amb la llum solar. Per tant, les investigacions desenvolupades en la present tesi doctoral han permés explorar per primera vegada l'ús de la llavor de xia com a font de matèria primera renovable per a l'obtenció de compostos actius aplicables al sector dels biopolímers. Per a això s'han desenvolupat nous compatibilizants i plastificants mitjançant el desenvolupament del ECO i del MCO, la revaloració de la farina de xia mitjançant la seua addició en matrius polimèriques desenvolupant nous WPC i desenvolupant, per primera vegada, una resina termoestable originària al 100% de la llavor de la xia., [EN] The mass production of plastics has led to serious environmental problems, as their slow degradation and high persistence in the environment causes the accumulation of plastic waste in oceans and land. In response, there is an active search for more sustainable alternatives, including biopolymers, compostable and biodegradable materials, recycled polymers and bio-based materials. New technologies are being developed for the production of packaging and products that are more sustainable and recyclable, and education and awareness initiatives are being promoted to reduce consumption and encourage recycling. The search for sustainable alternatives is an urgent priority to address the environmental impacts of plastics. Chia seed has great potential in the field of biopolymers due to its high content of polyunsaturated fatty acids (around 30% by weight of the seed) and chia flour is mainly composed of proteins, mucilage, carbohydrates and lignocellulosic residues. These components can be used to produce natural and biodegradable biopolymers, which can be a more sustainable alternative to traditional synthetic polymers. This doctoral thesis evaluates the capacity of using chia seed as a functional renewable resource in the field of biopolymers. After an extraction process, the possibility of chemically modifying the polyunsaturated fatty acids present in the fatty acids of chia oil is evaluated. Therefore, one of the first objectives is the optimisation of a process such as the epoxidation of chia oil, which has not been carried out in the scientific community until now. The development of this epoxidised chia oil (ECO) allows its subsequent testing as a bio-based plasticiser in intrinsically rigid and fragile biopolymers such as PLA. Furthermore, this same epoxidised oil can be used as a compatibiliser between apolar molecules, such as polymeric matrices, and lignocellulosic fillers, such as chia flour itself, introduced to mitigate the environmental impact and increase the revaluation of chia seed by-products. The use of ECO as a compatibiliser has been carried out with PLA and biopolyethylene (Bio-HDPE) based matrices, developing biodegradable and non-biodegradable biopolymers for different sectors. A maleinised chia oil (MCO) has also been developed. The introduction of this maleic anhydride molecule in the triglyceride allows it to have a high reactivity suitable for the development of a new bioplasticiser, as has been demonstrated by introducing it into PLA matrices, and even for use as hardeners in epoxy-type resis. For the first time, the development of a thermosetting resin based 100% on ECO as the base of the epoxy resin and MCO as the bio hardener is carried out. Finally, chia oil can also be used as a raw material to obtain glycolipids with liquid crystal behaviour. These glycolipids will be studied for their potential as surfactants in cosmetic applications or in energy applications for energy conversion and storage in the presence of compounds that interact with sunlight. Therefore, the research carried out in this doctoral thesis has made it possible to explore for the first time the use of chia seeds as a source of renewable raw material for obtaining active compounds applicable to the biopolymer sector. To this end, new compatibilisers and plasticisers have been developed through the development of ECO and MCO, the revaluation of chia flour by adding it to polymeric matrices, developing new WPCs and developing, for the first time, a thermosetting resin made from 100% chia seed., This research work was funded by the Ministry of Science and Innovation-”Retos de la Sociedad”. Project reference: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019- SP20190013) and Generalitat Valenciana (GVA) and the European Social Found (ESF), for his FPI grant (ACIF/2020/233) and the mobility grant (CIBEFP/2021/53). The authors from INMA greatly appreciate financial support from projects of the Spanish Government PGC2018-093761-B-C31 [MCIU/AEI/FEDER, UE] and the Gobierno de Aragón/FEDER (research group E47_20R). Thanks are given to the nuclear magnetic resonance, mass spectrometry, and thermal analysis services of the INMA (Univ. Zaragoza-CSIC)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-responsive bent-core liquid crystals as candidates for energy conversion and storage

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Zulkhairi, Iman
  • Pintre, Inmaculada
  • Kamalul Aripin, Nurul Fadhilah
  • Ros, Blanca
  • Martinez-Felipe, Alfonso
[EN] We have assessed the potential of light-responsive bent-core liquid crystals as candidate materials for energy conversion and storage applications. Samples comprise two chromophore bent-core compounds containing either one (IP33) or two (IP31) azobenzene groups, and their 5% (molar) mixtures with one non-chromophore bent-core compound (NG75), which was also measured as a reference material. The pristine compounds and their mixtures were introduced in thin transparent Indium Tin Oxide (ITO) cells, and were characterised by polarised optical microscopy, UV-visible spectrophotometry, impedance spectroscopy, and ferroelectric analysis, under different conditions of electrical fields and UV irradiation. All materials display smectic C polar phases (SmCP) except IP31, which forms columnar phases (Col), and IP33, IP31 and their mixtures exhibit light-responsiveness when irradiated at 365 nm due to reversible trans-to-cis photoisomerisation of the azobenzene units. All the bent-core based materials exhibit, at least, two dielectric relaxations, associated with different modes of molecular reorientation under weak alternating electrical fields (1 Vrms), as well as ferroelectric response that leads to permanent polarisation under the application of strong alternating fields (B75 kV cm¿1) at frequencies associated with the Goldstone-mode (1 Hz). Samples show considerable conductivity values and relaxor behaviour for liquid crystals, which can be tuned by application of UV light. In addition, we have induced in IP31 isothermal phase transitions from columnar to smectic phases (via the isotropic melt), by a combination of light and electrical stimuli. Our results confirm the potential of these bent-core compounds as light-harvesters for energy applications., IDC would like to thank the Universitat Politecnica de Valencia (UPV), for the FPI grant (PAID-2019-SP20190013), the Generalitat Valenciana (GVA) and the European Social Fund (ESF), for the FPI grant (ACIF/2020/233) and the mobility grant (CIBEFP/2021/53). NFKA would like to thank Universiti Teknologi MARA (UiTM) for sponsoring her academic sabbatical leave and allowing her to work on this project. AMF would like to thank the Carnegie Trust for the Universities of Scotland, for the Research Incentive Grant RIG008586, the Royal Society and Specac Ltd., for the Research Grant RGS\R1\201397, the Royal Society of Chemistry for the award of a mobility grant (M19-0000), and the Scottish Government and the Royal Society of Edinburgh for the award of a SAPHIRE project. The authors from INMA greatly appreciate financial support from projects of the Spanish Government PGC2018-093761-B-C31 [MCIU/AEI/FEDER, UE] and the Gobierno de Aragon/FEDER (research group E47_20R). Thanks are given to the nuclear magnetic resonance, mass spectrometry, and thermal analysis services of the INMA (Univ. Zaragoza-CSIC)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a novel epoxy resin based on epoxidized chia oil as matrix and maleinized chia oil as bio-renewable crosslinker

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Perez-Nakai, Aina
  • Torres-Roca, Elena
[EN] In this work novel thermosetting resins with high bio-based content have been developed derived from chia seed oil (CO). Epoxidized chia seed oil (ECO) was used as bio-based epoxy matrix with different mixtures of crosslinker agents, that is, methyl nadic anhydride (MNA) as petroleum-derived and maleinized chia seed oil (MCO) as bio-based crosslinker. The chemically modified oils from CO, that is, ECO and MCO, and MNA were analyzed by titration and FT-IR. Additional 1H NMR analysis was performed to characterize MCO structure. Two different behaviors were observed using the mixtures of crosslinkers. On one hand, MNA increases the rigidity with bio-based content of 54.2%. On the other hand, the addition of MCO provides higher ductility with bio-based content up to 98%. The same trend was observed by DMTA analysis. The novel cured resins were successfully crosslinked as demonstrated by the mechanical properties, FT-IR analyses, and gel content. Based on the results, it is concluded that MCO presents higher reactivity than MNA, decreasing curing time with possible energy saving at industrial level. In general, the results showed that adding the appropriate amount of MCO, green thermosetting resins with the desired thermal and mechanical properties can be manufactured with high bio-based content., Ministry of Science and Innovation,Grant/Award Number: PID2020-119142RA-I00; Universitat Politecnica de Valencia, Grant/Award Number: PAID-2019-SP20190013; Generalitat Valenciana,Grant/Award Number: ACIF/2020/233. This research work was funded by the Ministry of Science and Innovation-¿Retos de la Sociedad¿. Project references: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana-GVA (ACIF/2020/233). Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the dielectric and ferroelectric response of mixtures containing bent-core liquid crystals through light-irradiation and composition

  • Liebsch, Jasmin
  • Strachan, Rebecca
  • Suthaharan, Sivanujan
  • Auria-Soro, Carlota
  • San-Millan, Andres
  • Walker, Rebecca
  • Chilukuri, Bhaskar
  • Ros, M. Blanca
  • Martinez-Felipe, Alfonso
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
[EN] We report the mesomorphic behaviour, dielectric and ferroelectric properties, and computational modelling of binary mixtures containing two bent-core liquid crystals: the so-called NG75-COO (3,4- Bis[4-(4-n-tetradecyloxybenzoyloxy)benzoyloxy]biphenyl), which forms smectic phases, and IP31- AzB (3,4 ' - Bis[4-(4-n-tetradecyloxyphenylazo)benzoyloxy]biphenyl), which forms columnar phases. The phase diagram, assessed by polarised optical microscopy, shows that the binary mixtures retain the mesophase behaviour of the major component, whilst the equimolar mixture displays smectic-type phases. Dielectric and ferroelectric analyses were carried out on samples containing 10%, 50%, and 90% of IP31-AzB (molar %), and we also investigated structure-property correlations by differential functional theory. The NG75-COO/IP31-AzB mixtures undergo strong dielectric and ferroelectric response due to the presence of highly polarisable groups in the bent-core components, particularly at the ester groups. All the mixtures under study exhibit light-responsiveness induced by reversible E-to-Z photoisomerization (trans-to-cis) of the azobenzene group in IP31-AzB, together with an increase in the molecular dipole moment. The potential to tune the phase behaviour of the mixtures, as well as their dielectric and ferroelectric responses, are investigated by light irradiation under different conditions of intensity and temperature., IDC would like to thank the Universitat Politecnica de Valencia (UPV) , for the FPI grant (PAID-2019-SP20190013) , the Generalitat Valenciana (GVA) and the European Social Fund (ESF) , for the FPI grant (ACIF/2020/233) and the mobility grant (CIBEFP/2022/45) . AMF would like to thank the Carnegie Trust for the Universities of Scotland, for the Research Incentive Grant RIG008586, the Royal Society and Specac Ltd., for the Research Grant RGS\R1\201397, the Royal Society of Chemistry for the award of a mobility grant (M19- 0000) , the Scottish Government and the Royal Society of Edinburgh for the award of a SAPHIRE project, NHS Scotland for the 20/016 R & D Endowments Award, and the University of Aberdeen for the CF10801-10 and CF10723-44 pump priming grants. The authors from INMA greatly appreciate financial support from projects of the Spanish Government PID2021-122882NB-I00 [MCIU/AEI/FEDER, UE] and the Gobierno de Aragon/FEDER (research group E47_23R) ; and C.A-S for the FPI Fellowship PRE2019-090773. Thanks are given to the nuclear magnetic resonance, mass spectrometry, and thermal analysis services of CEQMA (Univ. Zaragoza-CSIC) . BC is grateful to the National Science Foundation for supporting this work under grant no. CHE- 2306317. BC also thanks Illinois State University (ISU) for their financial support through University research grant (URG) . Computational work is performed using resources from High Performance Computing (HPC) at Illinois State University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epoxidized and Maleinized Hemp Oil to Develop Fully Bio-Based Epoxy Resin Based on Anhydride Hardeners

  • Lerma-Canto, Alejandro
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] The present work aims to develop thermosetting resins using epoxidized hemp oil (EHO) as a bio-based epoxy matrix and a mixture of methyl nadic anhydride (MNA) and maleinized hemp oil (MHO) in different ratios as hardeners. The results show that the mixture with only MNA as a hardener is characterized by high stiffness and brittleness. In addition, this material is characterized by a high curing time of around 170 min. On the other hand, as the MHO content in the resin increases, the mechanical strength properties decrease and the ductile properties increase. Therefore, it can be stated that the presence of MHO confers flexible properties to the mixtures. In this case, it was determined that the thermosetting resin with balanced properties and high bio-based content contains 25% MHO and 75% MNA. Specifically, this mixture obtained a 180% higher impact energy absorption and a 195% lower Young's modulus than the sample with 100% MNA. Also, it has been observed that this mixture has significantly shorter times than the mixture containing 100% MNA (around 78 min), which is of great concern at an industrial level. Therefore, thermosetting resins with different mechanical and thermal properties can be obtained by varying the MHO and MNA content., This research was funded by MCIN/AEI/ 10.13039/501100011033 through the PID-AEI Project (grants PID2020-119142RA-I00 and PID2021-123753NA-C33) and the TED-AEI Project (grants TED2021-129920A-C43 and TED2021-131762A-100) and, as appropriate, by ¿ERDF A way of making Europe¿, by the ¿European Union¿ or by the ¿European Union NextGenerationEU/PRTR¿. Dominguez-Candela wants to thank Universitat Politècnica de València for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physicochemical Characterization of Novel Epoxidized Vegetable Oil from Chia Seed Oil

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Lerma-Canto, Alejandro
[EN] In this study, a novel epoxidized vegetable oil (EVO) from chia seed oil (CSO) has been obtained, with the aim to be employed in a great variety of green products related to the polymeric industry, as plasticizers and compatibilizers. Previous to the epoxidation process characterization, the fatty acid (FA) composition of CSO was analyzed using gas chromatography (GC). Epoxidation of CSO has been performed using peracetic acid formed in situ with hydrogen peroxide and acetic acid, applying sulfuric acid as catalyst. The effects of key parameters as temperature (60, 70, and 75 degrees C), the molar ratio of hydrogen peroxide:double bond (H2O2:DB) (0.75:1.0 and 1.50:1.0), and reaction time (0-8 h) were evaluated to obtain the highest relative oxirane oxygen yield (Y-oo). The evaluation of the epoxidation process was carried out through iodine value (IV), oxirane oxygen content (O-o), epoxy equivalent weight (EEW), and selectivity (S). The main functional groups were identified by means of FTIR and H-1 NMR spectroscopy. Physical properties were compared in the different assays. The study of different parameters showed that the best epoxidation conditions were carried out at 75 degrees C and H2O2:DB (1.50:1), obtaining an O-o value of 8.26% and an EEW of 193 (g center dot eq(-1)). These high values, even higher than those obtained for commercial epoxidized oils such as soybean or linseed oil, show the potential of the chemical modification of chia seed oil to be used in the development of biopolymers., This research work was funded by the Ministry of Science and Innovation-"Retos de la Sociedad". Project reference: PID2020-119142RA-I00. I. Dominguez-Candela wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Study of the Properties of Plasticized Polylactic Acid with Maleinized Hemp Seed Oil and a Novel Maleinized Brazil Nut Seed Oil

  • Perez-Nakai, Aina
  • Lerma-Cantó, Alejandro
  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ferri, J.M|||0000-0002-1269-4973
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] In this study, for the first time, Brazil nut seed oil was chemically modified with maleic anhydride to obtain maleinized Brazil nut seed oil (MBNO). The same process was developed to obtain maleinized hemp seed oil (MHO). The use of MBNO and MHO was studied as bio-based plasticizers by incorporating them with different contents ranging from 0 to 10 phr in a polylactic acid (PLA) matrix. By means of mechanical, thermal and thermomechanical characterization techniques, the properties of the different formulations were studied to evaluate the plasticizing effect of the MBNO and MHO. With the addition of both plasticizers, a significant increase in ductile properties was observed, reaching an increase in elongation at break of 643% with 7.5 phr MBNO and 771% with 10 phr MHO compared to neat PLA. In addition, it has been observed that the mechanical resistant properties do not decrease, since the oils enhance the crystallization of PLA by increasing the free volume between its chains and counteracting the effect. Finally, a disintegration test was carried out under thermophilic conditions at 58 degrees C for 27 days, demonstrating that the incorporation of MHO and MBNO does not significantly affect the biodegradability of neat PLA., I.D.-C. wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233). J.M.F. thanks the postdoc contract (APOSTD/2019/122) Generalitat Valenciana (2019-2021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual Plasticizer/Thermal Stabilizer Effect of Epoxidized Chia Seed Oil (Salvia hispanica L.) to Improve Ductility and Thermal Properties of Poly(Lactic Acid)

  • Domínguez-Candela, Iván|||0000-0003-3288-1079
  • Ferri, J.M|||0000-0002-1269-4973
  • Cardona, S. C.|||0000-0002-2882-3098
  • Lora-García, Jaime|||0000-0003-1699-5404
  • Fombuena, Vicent|||0000-0001-7266-6205
[EN] The use of a new bio-based plasticizer derived from epoxidized chia seed oil (ECO) was applied in a poly(lactic acid) (PLA) matrix. ECO was used due to its high epoxy content (6.7%), which led to an improved chemical interaction with PLA. Melt extrusion was used to plasticize PLA with different ECO content in the 0-10 wt.% range. Mechanical, morphological, and thermal characterization was carried out to evaluate the effect of ECO percentage. Besides, disintegration and migration tests were studied to assess the future application in packaging industry. Ductile properties improve by 700% in elongation at break with 10 wt.% ECO content. Field emission scanning electron microscopy (FESEM) showed a phase separation with ECO content equal or higher than 7.5 wt.%. Thermal stabilization was improved 14 degrees C as ECO content increased. All plasticized PLA was disintegrated under composting conditions, not observing a delay up to 5 wt.% ECO. Migration tests pointed out a very low migration, less than 0.11 wt.%, which is to interest to the packaging industry., I.D.-C. wants to thank Universitat Politecnica de Valencia for his FPI grant (PAID-2019-SP20190013) and Generalitat Valenciana (GVA) for his FPI grant (ACIF/2020/233). J.M.F. thanks the postdoc contract (APOSTD/2019/122) Generalitat Valenciana (2019-2021).