Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Gupta, Kapil|||0000-0002-4826-6620
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Pinto-Huguet, Ivan
  • Botifoll, Marc|||0000-0002-4876-6393
  • Li, Canhuang
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Zhou, Jin Yuan
  • Ponrouch, Alexandre|||0000-0002-8232-6324
  • Zhao, Ruirui|||0000-0002-6016-5275
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of LiS and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Post-Li batteries: promises and challenges

  • Ponrouch, Alexandre
  • Palacín, M. Rosa
Current societal challenges in terms of energy storage have prompted an intensification in the research aiming at unravelling new high energy density battery technologies. These would have the potential of having disruptive effects in the world transition towards a less carbon-dependent energy economy through transport, both by electrification and renewable energy integration. Aside from controversial debates on lithium supply, the development of new sustainable battery chemistries based on abundant elements is appealing, especially for large-scale stationary applications. Interesting alternatives are to use sodium, magnesium or calcium instead of lithium. While for the Na-ion case, fast progresses are expected as a result of chemical similarities with lithium and the cumulated Li-ion battery know-how over the years, for Ca and Mg the situation is radically different. On the one hand, the possibility to use Ca or Mg metal anodes would bring a breakthrough in terms of energy density; on the other, development of suitable electrolytes and cathodes with efficient multivalent ion migration are bottlenecks to overcome., Funding from the European Union’s Horizon 2020 research and innovation programme is acknowledged, both from the European Research Council (A. Ponrouch ERC-2016-STG, CAMBAT grant agreement no. 715087) and FETOPEN-1-2016-2017 (CARBAT, grant agreement no. 766617). Acknowledgements. Authors acknowledge ALISTORE-ERI members and NAIADES (H2020, 646433) partners for helpful discussions and are grateful to Fanny Barde (Toyota Motor Europe) and M. Elena Arroyo-de Dompablo for fruitful collaboration. Authors are grateful to Ministry of Science, Innovation and Universities for support through MAT2017-86616-R and ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multivalent rechargeable batteries

  • Ponrouch, Alexandre
  • Bitenc, Jan
  • Dominko, Robert
  • Lindahl, Niklas
  • Johansson, Patrik
  • Palacín, M. Rosa
Rechargeable battery technologies based on the use of metal anodes coupled to multivalent charge carrier ions (such as Mg2+, Ca2+ or Al3+) have the potential to deliver breakthroughs in energy density radically leap-frogging the current state-of-the-art Li-ion battery technology. However, both the use of metal anodes and the migration of multivalent ions, within the electrolyte and the electrodes, are technological bottlenecks which make these technologies, all at different degrees of maturity, not yet ready for practical applications. Moreover, the know-how gained during the many years of development of the Li-ion battery is not always transferable. This perspective paper reviews the current status of these multivalent battery technologies, describing issues and discussing possible routes to overcome them. Finally, a brief section about future perspectives is given., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methods and Protocols for reliable electrochemical testing in post Li batteries (Na, K, Mg and Ca)

  • Dugas, Romain
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
While less mature than Li-ion battery, technologies based on Na, K, Mg and Ca are attracting more and more attention from the battery community. New material (cathode, anode or electrolyte) testing for these post Li systems commonly involves the use of an electrochemical setup called half-cell in which metal counter and reference electrodes are used. Here we firstly describe the different issues that become critical when moving away from Li with respect to the cell hardware (cell design, current collector, separator, insulator) and the nature of counter and reference electrodes. Workarounds are given and a versatile setup is proposed to run reliable electrochemical tests for post Li battery materials in general, in a broad range of electrolyte compositions., Funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 715087) and doctoral cofund program H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397) is acknowledged. Financial support from the Spanish Ministry for Economy, Industry and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) is also acknowledged. R.D. acknowledges support of the Beatriu de Pinós postdoctoral programme of the Government of Catalonia’s Secretariat for Universities and Research of the Ministry of Economy and Knowledge (2017 BP 00187), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cation Solvation and Physico-Chemical Properties of Ca Battery Electrolytes

  • Forero Saboya, Juan
  • Marchante, Elena
  • Neves de Araújo, Rafael Barros
  • Monti, Damien
  • Johansson, Patrik
  • Ponrouch, Alexandre
Divalent cation based batteries are being considered as potential high energy density storage devices. The optimization of electrolytes for these technologies is, however, still largely lacking. Recent demonstration of the feasibility of Ca and Mg plating and stripping in the presence of a passivation layer or an artificial interphase has paved the way for more diverse electrolyte formulations. Here we exhaustively evaluate several Ca based electrolytes with different salts, solvents and concentrations, via measuring physico-chemical properties and using vibrational spectroscopy. Some comparisons with Mg and Li based electrolytes are made in order to highlight the unique properties of the Ca2+ cation. The Ca-salt solubility is found to be a major issue, calling for development of new highly dissociative salts. Nonetheless, reasonable salt solubility and dissociation was achieved using TFSI, BF4 and triflate anion based electrolytes and high permittivity solvents such as EC, PC, gBL and DMF. The local Ca2+ coordination is concentration dependent and rather complex, possibly involving bidentate coordination and participation of the nitrogen atom of DMF. The ionicity and the degree of ion-pair formation were both investigated and found to be strongly dependent on the nature of the cation, solvent donicity and salt concentration. The large ion-ion interaction energies of the contact ion-pairs, confirmed by DFT calculations, are expected to play a major role in the interfacial processes, and thus we here provide electrolyte design strategies to engineer the cation solvation and possibly improve the power performance of divalent battery systems., Funding from the European Union’s Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement No. 715087), FETOPEN-1-2016-2017 (CARBAT, grant agreement No. 766617), and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement No. 754397). A.P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496). P.J. acknowledges financial support from the Swedish Energy Agency (contract #37671-1, Next Generation Batteries) and Chalmers Battery Initiative, part of the profile Materials for Energy Applications jointly managed by the Areas of Advance Materials Science and Energy at the Chalmers University of Technology, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Achievements, Challenges, and Prospects of Calcium Batteries

  • Arroyo-de Dompablo, M. Elena
  • Ponrouch, Alexandre
  • Johansson, Patrik
  • Palacín, M. Rosa
This Review flows from past attempts to develop a (rechargeable) battery technology based on Ca via crucial breakthroughs to arrive at a comprehensive discussion of the current challenges at hand. The realization of a rechargeable Ca battery technology primarily requires identification and development of suitable electrodes and electrolytes, which is why we here cover the progress starting from the fundamental electrode/electrolyte requirements, concepts, materials, and compositions employed and finally a critical analysis of the state-of-theart, allowing us to conclude with the particular roadblocks still existing. As for crucial breakthroughs, reversible plating and stripping of calcium at the metal-anode interface was achieved only recently and for very specific electrolyte formulations. Therefore, while much of the current research aims at finding suitable cathodes to achieve proof-of-concept for a full Ca battery, the spectrum of electrolytes researched is also expanded. Compatibility of cell components is essential, and to ensure this, proper characterization is needed, which requires design of a multitude of reliable experimental setups and sometimes methodology development beyond that of other next generation battery technologies. Finally, we conclude with recommendations for future strategies to make best use of the current advances in materials science combined with computational design, electrochemistry, and battery engineering, all to propel the Ca battery technology to reality and ultimately reach its full potential for energy storage., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Funding from the European Union’s Horizon 2020 research and innovation programme H2020 FETOPEN-1-2016-2017 (CARBAT, grant agreement No. 766617) and ERC-2016-STG, (CAMBAT grant agreement No 715087) and are grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) P.J. acknowledges the financial support from the Swedish Energy Agency (contract #37671-1, Next Generation Batteries) and Chalmers Battery Initiative, part of the profile Materials for Energy Applications jointly managed by the Areas of Advance Materials Science and Energy at the Chalmers University of Technology., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ionic Liquid-Based Electrolytes for Calcium-Based Energy Storage Systems

  • Stettner, T.
  • Dugas, Romain
  • Ponrouch, Alexandre
  • Balducci, Andrea
In this work, aprotic and protic ionic liquid (IL)-based electrolytes designed for calcium-based energy storage systems are investigated. We have shown that these electrolytes display good transport properties and electrochemical stabilities comparable with those of IL-based electrolytes proposed for lithium and sodium-based systems. The use of these electrolytes in electrochemical double layer capacitors (EDLCs) leads to the realization of devices displaying good capacitances paired with a high reversibility and stability. Their use in combination with TiS2 cathode appears more problematic as the cation of the ILs is inserting in the layered structure of this material during the charge process. In this latter case a careful design of the cation appears necessary to guarantee selective insertion of Ca2+ and reversible charge-discharge process., AB and TS wish to thank the Friedrich Schiller University of Jena for the financial support. Funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (ERC-2016-STG, CAMBAT grant agreement No 715087) is acknowledged. RD acknowledges support of the Beatriu de Pinós postdoctoral programme of the Government of Catalonia's Secretariat for Universities and Research of the Ministry of Economy and Knowledge (2017 BP 00187). A. Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). We thank Dr. R. Verrelli for providing us with TiS2 electrodes and for helpful discussion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Steps Towards the Use of TiS2 Electrodes in Ca Batteries

  • Verrelli, Roberta
  • Black, Ashley P.
  • Dugas, Romain
  • Tchitchekova , Deyana S.
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
This paper is part of the JES Focus Issue on Challenges in Novel Electrolytes, Organic Materials, and Innovative Chemistries for Batteries in Honor of Michel Armand., A comparative study of the reduction of TiS2 in diverse electrolyte formulations involving Ca(BF4)2 and Ca(TFSI)2 salts was carried out at different temperatures (from 25 °C to 100 °C). While for the former salt intercalation of calcium is only observed at high temperatures, calcium intercalated phases are also observed for the latter even at room temperature. The nature of the electrolyte does also have an impact on the relative amounts of the phases formed. Since Ca(TFSI)2 based electrolytes do not enable calcium plating, cycling was attempted using activated carbon as counterelectrode, and the reversibility of the process was ascertained. Even if corrosion of stainless steel current collectors and side reactions do still prevent proper cyclability, the results achieved should contribute to the establishment of reliable and viable cell set-up and methodology for the unambiguous study of the intercalation process in multivalent battery systems., Funding from the European Union's Horizon 2020 research and innovation programme H2020 FETOPEN-1-2016-2017 (CARBAT, grant agreement No. 766617) and ERC-2016-STG, (CAMBAT grant agreement No 715087) is gratefully acknowledged. Authors are grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

On the road toward calcium-based batteries

  • Ponrouch, Alexandre
  • Palacín, M. Rosa
This article reviews the progress in the development of a possible battery technology based on calcium, which is an abundant element and has an interesting standard reduction potential. The main bottleneck has been to find electrolytes enabling reversible plating and stripping of calcium, which has been overcome recently. Ongoing efforts focus in optimizing them to enable effective operation of calcium anodes at room temperature and within a large redox potential operation window, despite the formation of a passivation layer at the electrolyte/anode interface. In parallel, researchers are looking for suitable cathode materials enabling reasonably fast insertion and de-insertion of Ca2+ ions, which need to be probed using diverse complementary characterization techniques to avoid biased interpretation of results derived from possible side reactions., Authors are grateful to Fanny Barde (Toyota Motor Europe) and M. Elena Arroyo-de Dompablo for fruitful collaboration and helpful discussions and the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). Funding from the European Union's Horizon 2020 research and innovation programme H2020 either from the European Research Council (A. Ponrouch ERC-2016-STG, CAMBAT grant agreement no. 715087) or FETOPEN-1-2016-2017 (CARBAT, grant agreement no. 766617) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the nature of the passivation layer enabling reversible calcium plating

  • Forero Saboya, Juan
  • Davoisne, Carine
  • Dedryvère, Rémi
  • Yousef, Ibraheem
  • Canepa, Pieremanuele
  • Ponrouch, Alexandre
As for other multivalent systems, the interface between the calcium (Ca) metal anode and the electrolyte is of paramount importance for reversible plating/stripping. Here, we combined experimental and theoretical approaches to unveil the potential solid electrolyte interphase (SEI) components enabling facile Ca plating. Borates compounds, in the form of cross-linked polymers are suggested as divalent conducting component. A pre-passivation protocol with such SEI is demonstrated and allows to broaden the possibility for electrolyte formulation. We also demonstrated a 10-fold increase in Ca plating kinetics by tuning the cation solvation structure in the electrolyte limiting the degree of contact ion pair., Funding from the European Union's Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement no. 715087) and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). A. Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) and to Prof. D. Lemordant (Tours University, France) for stimulating discussions. P. Canepa acknowledges funding from the National Research Foundation under his NRFF NRFF12-2020-0012 and the ANR-NRF NRF2019-NRF-ANR073 Na-MASTER. P. Canepa acknowledges the National Supercomputing Centre, Singapore (https://www.nscc.sg). This work has been done in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona. The FTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multivalent Mg2+-, Zn2+-, and Ca2+-Ion Intercalation Chemistry in a Disordered Layered Structure

  • Kang, Seongkoo
  • Reeves, Kyle G.
  • Koketsu, Toshinari
  • Ma, Jiwei
  • Borkiewicz, Olaf J.
  • Strasser, Peter
  • Ponrouch, Alexandre
  • Dambournet, Damien
The development of practical multivalent-ion batteries critically depends on the identification of suitable positive electrode materials. To gain a better understanding of the intercalation chemistry of multivalent ions, model frameworks can be used to study the distinct specificities of possible multivalent ions, thus expanding our knowledge on the emerging “beyond Li battery” technology. Here, we compare the intercalation chemistry of Mg2+, Zn2+, and Ca2+ ions in a disordered layered-type structure featuring water interlayers and cationic vacancies as possible host sites. The thermodynamics of cation-inserted reactions performed on the model structure indicated that these reactions are thermodynamically favorable with Zn2+ being the least stable ion. Galvanostatic measurements confirmed that the structure is inactive toward Zn2+ intercalation, while Mg2+ can be reversibly inserted (0.37 Mg2+ per formula unit) with minor changes in the atomic arrangement, as demonstrated by pair distribution function analysis. Moreover, we demonstrate that nonsolvated Mg2+ was intercalated in the structure. Finally, the intercalation of Ca2+ performed at 100 °C with Ca(BF4)2 in propylene carbonate induced the collapse of the layered structure releasing water molecules that contribute to the degradation of the electrolyte, as revealed by the presence of CaF2 at the electrode level. The decomposition of the structure led to the formation of an electrochemically active phase featuring a strong long-range disorder, yet a short-range order close to that found in perovskite structures, particularly with corner-shared TiO6 octahedra. We, hence, hypothesize that defective CaTiO3-based perovskite could be explored as viable cathode materials for rechargeable Ca-based batteries., The research leading to these results received funding from the French National Research Agency under Idex@Sorbonne University for the Future Investments Program (no. ANR-11-IDEX-0004-02). Funding from the European Union’s Horizon 2020 research is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement no. 715087). The work done at the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, was supported by the U.S. DOE under contract no. DE-AC02-06CH11357. A.P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). We thank IMPC FR2482 for SEM-FEG and TEM instrumentation funded by CNRS, Sorbonne Université and C’Nano projets of Region Ile-de-France., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A boron-based electrolyte additive for calcium electrodeposition

  • Forero Saboya, Juan
  • Bodin, Charlotte
  • Ponrouch, Alexandre
In recent years, several organic electrolytes have been reported allowing calcium metal electrodeposition. In all cases, some degree of passivation on the surface of the calcium electrode was reported. Following a recent report on borate-based passivation layer playing a crucial role for Ca plating in electrolyte solutions containing Ca(BF4)2, here we report the use of a boron-containing additive. The presence of this additive allows Ca plating and stripping using a Ca(TFSI)2 containing electrolyte, which otherwise lead to the formation of a fully Ca2+ blocking passivation layer., Funding from the European Union’s Horizon 2020 research and innovation program H2020 is acknowledged: European Research Council (ERC-2016-STG, CAMBAT grant agreement no. 715087) and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). A. Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). This work has been done in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona. Alistore-European Research Institute is gratefully acknowledged for financial support through the postdoc grant to C. Bodin., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interfaces and Interphases in Ca and Mg Batteries

  • Forero Saboya, Juan
  • Tchitchekova , Deyana S.
  • Johansson, Patrik
  • Palacín, M. Rosa
  • Ponrouch, Alexandre
The development of high energy density battery technologies based on divalent metals as the negative electrode is very appealing. Ca and Mg are especially interesting choices due to their combination of low standard reduction potential and natural abundance. One particular problem stalling the technological development of these batteries is the low efficiency of plating/stripping at the negative electrode, which relates to several factors that have not yet been looked at systematically; the nature/concentration of the electrolyte, which determines the mass transport of electro-active species (cation complexes) toward the electrode; the possible presence of passivation layers, which may hinder ionic transport and hence limit electrodeposition; and the mechanisms behind the charge transfer leading to nucleation/growth of the metal. Different electrolytes are investigated for Mg and Ca, with the presence/absence of chlorides in the formulation playing a crucial role in the cation desolvation. From a R&D point-of-view, proper characterization alongside modeling is crucial to understand the phenomena determining the mechanisms of the plating/stripping processes. The state-of-the-art is here presented together with a short perspective on the influence of the cation solvation also on the positive electrode and finally an attempt to define guidelines for future research in the field., J.D.F.-S. and D.S.T. contributed equally to this work. Funding from the European Union’s Horizon 2020 research and innovation programme ERC-2016-STG (CAMBAT Grant Agreement No. 715087) and H2020 FETOPEN-1-2016-2017 (CARBAT, Grant Agreement No. 766617) is gratefully acknowledged. ICMAB-CSIC members thank the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). J.D.F.-S. is grateful to 2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). J.D.F.-S. contributed to this work in the frame of the Doctoral Degree Program in Materials Science by the Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards a Simplified Electrochemical Method of Assessing Cations Transference Numbers of Electrolytes

  • Dugas, Romain 
  • Ponrouch, Alexandre
A simplified method is presented to extract the transport parameters of a liquid electrolyte solution from an experiment in a four-electrode cell. By observing that both polarisation and relaxation tend exponentially to a finite value with the same time constant, it becomes possible to precisely evaluate the limiting voltage attained upon polarisation though no steady state can be reached in practice, and use this input to evaluate the cation transference number as a function of the thermodynamic factor. This procedure simplifies the data analysis by avoiding complete fitting of the polarisation with a complicated numerical model. Such approach can favour the deployment of the four-electrode method to evaluate electrolyte transport parameters, which are crucial for the development of better performing batteries., Funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 715087). We thank the Spanish Agencia Estatal de Investigacion Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). R.D. acknowledges support of the Beatriu de Pinos postdoctoral programme of the Government of Catalonia's Secretariat for Universities and Research of the Ministry of Economy and Knowledge (2017 BP 00187). We thank Charles Delacourt and Mohammad Farkhondeh for useful discussion., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boron-Based Functional Additives Enable Solid Electrolyte Interphase Engineering in Calcium Metal Battery

  • Bodin, Charlotte
  • Forero Saboya, Juan
  • Jankowski, Piotr
  • Radan, Kristian
  • Foix, Dominique
  • Courrèges, Cécile
  • Yousef, Ibraheem
  • Dedryvère, Rémi
  • Davoisne, Carine
  • Lozinšek, Matic
  • Ponrouch, Alexandre
Calcium-metal batteries have received growing attention recently after several studies reporting successful metal plating and stripping with organic electrolytes. Given the low redox potential of metallic calcium, its surface is commonly covered by a passivation layer grown by the accumulation of electrolyte decomposition products. The presence of borate species in this layer has been shown to be a key parameter allowing for Ca2+ migration and favoring Ca electrodeposition. Here, boron-based additives are evaluated in order to tune the SEI composition, morphology, and properties. The decomposition of a BF3-based additive is studied at different potentiostatic steps and the resulting SEI layer was thoroughly characterized. SEI growth mechanism is proposed based on both experimental data and DFT calculations pointing at the formation of boron-crosslinked polymeric matrices. Several boron-based adducts are explored as SEI-forming additives for calcium-metal batteries paving the way to very rich chemistry leading to Ca2+ conducting SEI., Funding from the European Union's Horizon 2020 research and innovation program H2020 are acknowledged: European Research Council (ERC-2016-STG, CAMBAT, grant agreement no. 715087 and ERC-2020-STG, HiPeR−F, grant agreement no. 950625) and H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement no. 754397). A.P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S). D.F., C.C. and R.D. thank the French National Research Agency (STORE-EX Labex Project ANR-10-LABX-76-01) for financial support. K.R. and M.L. gratefully acknowledge the research funding by the Slovenian Research Agency (P1-0045, N1-0189). Alistore-European Research Institute is gratefully acknowledged for financial support through the postdoc grant to C.B. The SR-FTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. All DFT calculations were carried out at the Wroclaw Centre for Networking and Supercomputing within grant no. 346., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyimides as Promising Cathodes for Metal-Organic Batteries: A Comparison between Divalent (Ca2+, Mg2+) and Monovalent (Li+, Na+) Cations

  • Monti, Damien
  • Patil, Nagaraj
  • Black, Ashley P.
  • Raptis, Dionysios
  • Mavrandonakis, Andreas
  • Froudakis, George E.
  • Yousef, Ibraheem
  • Goujon, Nicolas
  • Mecerreyes, David
  • Marcilla, Rebeca
  • Ponrouch, Alexandre
Ca- and Mg-based batteries represent a more sustainable alternative to Li-ion batteries. However, multivalent cation technologies suffer from poor cation mass transport. In addition, the development of positive electrodes enabling reversible charge storage currently represents one of the major challenges. Organic positive electrodes, in addition to being the most sustainable and potentially low-cost candidates, compared with their inorganic counterparts, currently present the best electrochemical performances in Ca and Mg cells. Unfortunately, organic positive electrodes suffer from relatively low capacity retention upon cycling, the origin of which is not yet fully understood. Here, 1,4,5,8-naphthalenetetracarboxylic dianhydride-derived polyimide was tested in Li, Na, Mg, and Ca cells for the sake of comparison in terms of redox potential, gravimetric capacities, capacity retention, and rate capability. The redox mechanisms were also investigated by means of operando IR experiments, and a parameter affecting most figures of merit has been identified: the presence of contact ion-pairs in the electrolyte., Funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 715087) is gratefully acknowledged. ICMAB-CSIC members are grateful for funding through PTI+ TRANSENER+: “Alta Tecnología clave en la transición en el ciclo energético”, part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094 and thank the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel calcium fluorinated alkoxyaluminate salt as a next step towards Ca metal anode rechargeable batteries

  • Pavčnik, Tjaša
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
  • Robba, Ana
  • Dominko, Robert
  • Bitenc, Jan
Ca metal anode rechargeable batteries are seen as a sustainable high-energy density and high-voltage alternative to the current Li-ion battery technology due to the low redox potential of Ca metal and abundance of Ca. Electrolytes are key enablers on the path towards next-generation battery systems. Within this work, we synthesize a new calcium tetrakis(hexafluoroisopropyloxy) aluminate salt, Ca[Al(hfip)4]2, and benchmark it versus the state-of-the-art boron analogue Ca[B(hfip)4]2. The newly developed aluminate-based electrolyte exhibits improved performance in terms of conductivity, Ca plating/stripping efficiency, and oxidative stability as well as Ca battery cell performance. A marked improvement of 0.5 V higher oxidative stability can pave the path towards high-voltage Ca batteries. A critical issue of solvent quality during salt synthesis is identified as well as solvent decomposition at the Ca metal/electrolyte interface, which leads to passivation of the Ca metal anode. However, the new aluminate salt with preferable electrochemical properties over the existing boron analogue opens up a new area for future Ca battery research based on aluminium compounds., T. P., J. B. and R. D. would like to acknowledge support from Slovenian Research Agency through research programmes P2-0423, P2-0393 and research projects J2-4462, N2-0279. A. R. acknowledges funding from the same agency for research programme P1-0153. A. P. and J. F. S. acknowledge the funding from the European Union's Horizon 2020 research and innovation program (Grant No. 715087), and the H2020 Marie Skłodowska-Curie Action COFUND-2016 DOC-FAM (Grant No. 754397). A. P. is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqua-tri-fluorido-boron-1,3-dioxolan-2-one (1/2)

  • Radan, Kristian
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
  • Lozinšek, Matic
The crystal structure of the co-crystal of aqua-tri-fluorido-boron with two ethyl-ene carbonate (systematic name: 1,3-dioxolan-2-one) mol-ecules, BF3H2O·2OC(OCH2)2, was determined by low-temperature single-crystal X-ray diffraction. The co-crystal crystallizes in the ortho-rhom-bic space group P212121 with four formula units per unit cell. The asymmetric unit consists of an aqua-tri-fluorido-boron mol-ecule and two ethyl-ene carbonate mol-ecules, connected by O-H⋯O=C hydrogen bonds. This crystal structure is an inter-esting example of a superacidic BF3H2O species co-crystallized with an organic carbonate., Funding for this research was provided by: European Research Council (ERC) (StG HiPeR-F and StG CAMBAT) (grant agreement Nos. 950625 and 715087); Marie Skłodowska-Curie Actions (COFUND-2016 DOC-FAM) under the European Union’s Horizon 2020 research and innovation programme (grant No. 754397); Jozˇef Stefan Institute Director’s Fund; Slovenian Research Agency (grant No. N1-0189); Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (contract No. CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing
  • Huang, Chen
  • Usoltsev, Oleg
  • Black, Ashley P.
  • Gupta, Kapil
  • Spadaro, Maria Chiara
  • Pinto, Iván
  • Botifoll, Marc
  • Li, Canhuang
  • Herrero Martín, Javier
  • Zhou, Jinyuan
  • Ponrouch, Alexandre
  • Zhao, Ruirui
  • Balcells, Lluis
  • Zhang, Chao Yue
  • Cabot, Andreu
  • Arbiol, Jordi
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of Li2S and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g-1 at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm-2, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells., This study is part of the Advanced Materials program and In-CAEM project, supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. This work is in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICMAB-CSIC members thank the State Investigation Agency and Spanish Ministery of Science, Innovation and Universities through (PID2020-113805GB-I00) and OXISOT (PID2021-128410OB-I00). ICN2 acknowledges funding from grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.(71) This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 and European Union Next Generation EU/PRTR. IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 and ICMAB acknowledge the support from the Severo Ochoa Programme (MINECO, grant no. CEX2021-001214-S and CEX2023-001263-S). A.P. acknowledges the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant no. 715087)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Polyimides as Promising Cathodes for Metal-Organic Batteries, A Comparison between Divalent (Ca 2+, Mg 2+) and Monovalent (Li +, Na +) Cations

  • Monti, Damien|||0000-0002-8937-2518
  • Patil, Nagaraj|||0000-0002-2873-6824
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Raptis, Dionysios
  • Mavrandonakis, Andreas|||0000-0002-5053-8154
  • Froudakis, George E.|||0000-0002-6907-1822
  • Yousef, Ibraheem|||0000-0001-7818-8611
  • Goujon, Nicolas|||0000-0002-0555-2846
  • Mecerreyes, David|||0000-0002-0788-7156
  • Marcilla, Rebeca|||0000-0002-5660-6381
  • Ponrouch, Alexandre|||0000-0002-8232-6324
Ca- and Mg-based batteries represent a more sustainable alternative to Li-ion batteries. However, multivalent cation technologies suffer from poor cation mass transport. In addition, the development of positive electrodes enabling reversible charge storage currently represents one of the major challenges. Organic positive electrodes, in addition to being the most sustainable and potentially low-cost candidates, compared with their inorganic counterparts, currently present the best electrochemical performances in Ca and Mg cells. Unfortunately, organic positive electrodes suffer from relatively low capacity retention upon cycling, the origin of which is not yet fully understood. Here, 1,4,5,8-naphthalenetetracarboxylic dianhydride-derived polyimide was tested in Li, Na, Mg, and Ca cells for the sake of comparison in terms of redox potential, gravimetric capacities, capacity retention, and rate capability. The redox mechanisms were also investigated by means of operando IR experiments, and a parameter affecting most figures of merit has been identified: the presence of contact ion-pairs in the electrolyte.