Pasar al contenido principal

INTEGRACION DE NUEVOS CONTACTOS SELECTIVOS Y CAPAS ACTIVAS EN DISPOSITIVOS DE NUEVA GENERACION PARA APLICACIONES DE ENERGIA RENOVABLE

PID2022-138434OB-C51

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Proton irradiation effects on silicon heterojunction solar cells with MoOx selective contacts

  • Duarte Cano, Sebastián
  • Pérez Zenteno, Francisco José
  • Caudevilla Gutiérrez, Daniel
  • Olea Ariza, Javier
  • San Andrés Serrano, Enrique
  • del Prado Millán, Alvaro
  • Benítez Fernández, Rafael
  • Garcia Hemme, Eric
  • Rezaei, Mohammadreza
  • Clemente Barreira, Juan Antonio
  • Algaidy, Sari
  • Torres Almarza, Ignacio
  • Barrio Martin, Rocío
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • García Hernansanz, Rodrigo
In this study, we investigate the effects of proton irradiation on silicon-based heterojunction and molybdenum oxide (MoOx) selective contact solar cells. The main idea is to study their potential application in small satellites for measurement and monitoring. The irradiation dose simulates the aggressive environment found in Low Earth Orbit (LEO), where many satellites currently use Group III-VI (GaInP/GaAs/Ge) solar cells due to their superior efficiency, albeit at a higher cost. The experimental approach includes fabrication, irradiation, and characterization methods. Our results show a decrease in fill factor (F.F.) and overall efficiency after irradiation, mainly caused by a decrease in shunt resistance and an increase in series resistance. In addition, open-circuit voltage (Voc) and short-circuit current (Isc) may be affected by displacement damage defects caused by the irradiation process within the active region or by the formation of new point defects., The authors would like to acknowledge the “CAI de Técnicas Físicas” of the Universidad Complutense de Madrid, ICTS – Centro Nacional de Microscopia Electrónica, to "Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas" CIEMAT, Centro Nacional de Aceleradores (CNA), Institute of Nuclear Physics of the Czech Academy of Sciences (CAS) in Prague, and finally to RADNEXT TA04-43 for the support in resources and management of entities in the process of solar cell radiation with ASCUAS project. This activity has received funding from the European Union's 2020 research and innovation program under grant agreement No 101008126, corresponding to the RADNEXT project. This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020-116508RB-I00, PID2020-117498RB-I00, PID2020-112916 GB-100 and PID2022-138434OB-C51.The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B-C21) and TransEL (TED2021-129758B-C32) funded by the Recovery and Resilience Facility of the EU. F. Pérez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for a predoctoral contract from UCM (call CT58/21-CT59/21). Sary Algaidy would also like to acknowledge financial support from the Ministry of Education in the Kingdom of Saudi Arabia. R. Benítez-Fernández acknowledge the research contract under the Investigo Program (CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Interdigitated MgO/Au front selective contacts for enhanced photocatalytic systems based on TiO2 as light-absorber

  • Segura Blanch, Oriol
  • Ros Costals, Eloi
  • Agrelo Lestón, Asier|||0000-0002-4744-7278
  • Maggi, Edoardo
  • Calvo Barrio, Lorenzo
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
Selective charge extraction is a central limitation in heterogeneous photocatalysis, where short carrier diffusion lengths and interfacial recombination strongly restrict efficiency. Here we translate the photovoltaic concept of selective contacts to photocatalytic systems by designing interdigitated front architectures on a planar TiO2 absorber. Magnesium–magnesium oxide (Mg–MgOx) is used as an electron-selective layer, while gold nanoparticles act simultaneously as hole-selective contacts, plasmonic enhancers, and charge-transfer mediators toward gas-phase reactants. Interdigitated Mg–MgOx/Au patterns with controlled coverage and perimeter were fabricated on sol–gel anatase TiO2 films and tested for hydrogen production from ethanol–water vapor mixtures under UV illumination. While Au nanoparticles alone strongly enhance activity through efficient hole extraction and plasmonic effects, the addition of Mg–MgOx enables selective electron collection. However, performance is not governed by Mg–MgOx coverage alone. Samples with similar Mg–MgOx area fractions but different geometries show markedly different hydrogen production rates. To rationalize this behavior, we introduce a dimensionless geometric parameter η, defined as the normalized ratio between selective-contact perimeter and coverage. Hydrogen production follows a Langmuir–Hinshelwood-type kinetic model when expressed as a function of η, demonstrating that interfacial length, rather than area alone, controls the number of photogenerated carriers that reach adsorbed reactants before recombining. Highly interdigitated samples show up to a twofold increase in hydrogen production compared to non-patterned TiO2/Au references, despite having comparable material composition., This project received funding from the European Union’s H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain projects number PID2023-148976OBC41/C44 (CURIO-CITY) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program), PID2022-140226OB-C31C32 (INNO-PV), PID2022-138434OB-C51 (SCALING), MICIN/FEDER PID2024-156765OB-C21, PCI2024-155100-2 (ENPOWER, CETPPartnership Program 2023), funded by MCIN/AEI/10.13039/ 501100011033/FEDER, and CNS2023-14817 (SELECTRON) funded by MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR. Some of the authors from UPC belong to the Micro and Nanotechnologies for Solar Energy Group (MNT-Solar) Consolidated Research Group of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. E.S. is grateful to ICREA Academia program. J.L is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). E.R. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d’Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022., Peer Reviewed, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of atomic layer deposition temperature on electrical and optical properties of ZnO:Al films

  • Masmitjà Rusiñol, Gerard|||0000-0001-9541-7586
  • Estarlich Gil, Pau|||0000-0002-2308-6594
  • López Rodríguez, Gema|||0000-0003-4806-5180
  • Martín García, Isidro|||0000-0001-8833-9057
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Placidi, Marcel Jose|||0000-0001-5684-9669
  • Torrens Dinarès, Arnau
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Vasquez, Pia
  • Muñoz, Delfina
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
This work highlights the impact of growth temperature on electrical and optical properties of Al-doped ZnO (AZO) films deposited by atomic layer deposition (ALD) technique. The ALD process and super-cycle sequence have been optimized, identifying their influence on film resistivity. By using this optimum ALD procedure, the optical and electrical properties of AZO films have been widely analyzed considering the deposition temperature. Results show promising values with film resistivity in the range of 1 m¿cm and average optical absorption below 2% for 50 nm thick AZO layers. Hall effect, X-ray diffraction and ellipsometry measurements point out that these excellent values are related to their high carrier concentration and mobility, crystalline phase and optical band gap resulting in ALD AZO films with very good properties to be applied in photovoltaic devices as transparent conductive oxide electrode, This work has been supported by the Spanish government under projects PID2019-109215RB-C41 (SCALED), PID2020-115719RB-C21 (GETPV), TED2021-131778B–C22 (TROPIC) and TED2021-129758B–C32 (TransEl) funded by MCIN/AEI/10.13039/501100011033. TROPIC and TransEl projects have also support from the European Union “NextGenerationEU”/PRTR program. This work has been developing under the FOTOCER project's guidelines, which is partially funded by CDTI and MICIN Spanish government through the European Union NextGeneration/PRTR program. G. M. acknowledges financial support of the Grant – UPC Margarita Salas 2021, of the Spanish Ministry of Universities and the European Unión – NextGenerationEU. The authors wish to express their thanks to Ivan Caño for his help about XRD measurements included in the supplementary information and carried out at the Centre de Recerca en Ciència i Enginyeria Multiescala de Barcelona (CRCEMB).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fully atomic layer deposited transparent carrier-selective contacts for bifacial Cd-free Cu2ZnSnSe4 thin-film solar cells

  • Almache Hernández, Rosa
  • Masmitjà Rusiñol, Gerard|||0000-0001-9541-7586
  • Pusay, Benjamín
  • Ros Costals, Eloi|||0000-0002-1952-6614
  • Tiwari, Kunal Jogendra|||0000-0002-1126-2634
  • Vidal Fuentes, Pedro
  • Izquierdo Roca, Víctor
  • Saucedo Silva, Edgardo Ademar|||0000-0003-2123-6162
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Puigdollers i González, Joaquim|||0000-0002-1834-2565
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
Thin-film solar cells based on kesterite (Cu2ZnSnSe4) material are a promising alternative for photovoltaic devices due to their composition consisting of earth abundant elements, ease of production at a relatively low temperatures and excellent optical absorption properties. Additionally, this absorber compound allows a tuneable bandgap energy in the 1 to 1.5 eV window range, which makes it an attractive candidate either as a top or a bottom solar cell in tandem technologies combined with transparent carrier-selective contacts. However, conventional kesterite devices use a toxic CdS layer as an electron-selective contact, resulting in the difficult-to-dispose chemical waste. This work explores the use of a stack of ZnO and Al-doped ZnO (AZO) films deposited by ALD to replace the CdS-based contacts in kesterite devices. The inclusion of a polyethylenimine (PEI) interlayer as dipole to enhance the overall electrical contact performance is also discussed. The transparent back contact is formed by an ALD V2Ox thin layer over a FTO conductive electrode. Fabricated kesterite solar cells exhibit remarkable photocurrent density values of 35 mAcm-2, open-circuit voltage around 260 mV and efficiencies up to 3.5% using front illumination. The aforementioned photovoltaic parameters yield to 5.3 mAcm-2, 160 mV and 0.3% respectively under back illumination, demonstrating the bifaciality of the proposed structure., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fully atomic layer deposited transparent carrier-selective contacts for bifacial Cd-free Cu2ZnSnSe4 thin-film solar cells

  • Almache Hernández, Rosa
  • Masmitjà Rusiñol, Gerard
  • Pusay, Benjamín
  • Ros Costals, Eloi
  • Tiwari, Kunal Jogendra
  • Vidal Fuentes, Pedro
  • Izquierdo Roca, Víctor
  • Saucedo Silva, Edgardo Ademar
  • Voz Sánchez, Cristóbal
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
Thin-film solar cells based on kesterite (Cu2ZnSnSe4) material are a promising alternative for photovoltaic devices due to their composition consisting of earth abundant elements, ease of production at a relatively low temperatures and excellent optical absorption properties. Additionally, this absorber compound allows a tuneable bandgap energy in the 1 to 1.5 eV window range, which makes it an attractive candidate either as a top or a bottom solar cell in tandem technologies combined with transparent carrier-selective contacts. However, conventional kesterite devices use a toxic CdS layer as an electron-selective contact, resulting in the difficult-to-dispose chemical waste. This work explores the use of a stack of ZnO and Al-doped ZnO (AZO) films deposited by ALD to replace the CdS-based contacts in kesterite devices. The inclusion of a polyethylenimine (PEI) interlayer as dipole to enhance the overall electrical contact performance is also discussed. The transparent back contact is formed by an ALD V2Ox thin layer over a FTO conductive electrode. Fabricated kesterite solar cells exhibit remarkable photocurrent density values of 35 mAcm-2, open-circuit voltage around 260 mV and efficiencies up to 3.5% using front illumination. The aforementioned photovoltaic parameters yield to 5.3 mAcm-2, 160 mV and 0.3% respectively under back illumination, demonstrating the bifaciality of the proposed structure., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Proton irradiation effects on silicon heterojunction solar cells with MoOx selective contacts

  • Duarte Cano, Sebastián
  • Pérez Zenteno, Francisco José
  • Caudevilla Gutiérrez, Daniel
  • Olea Ariza, Javier
  • San Andrés Serrano, Enrique
  • del Prado Millán, Alvaro
  • Benítez Fernández, Rafael
  • Garcia Hemme, Eric
  • Rezaei, Mohammadreza
  • Clemente Barreira, Juan Antonio
  • Algaidy, Sari
  • Torres Almarza, Ignacio
  • Barrio Martin, Rocío
  • Ros Costals, Eloi
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
  • Voz Sánchez, Cristóbal
  • García Hernansanz, Rodrigo
In this study, we investigate the effects of proton irradiation on silicon-based heterojunction and molybdenum oxide (MoOx) selective contact solar cells. The main idea is to study their potential application in small satellites for measurement and monitoring. The irradiation dose simulates the aggressive environment found in Low Earth Orbit (LEO), where many satellites currently use Group III-VI (GaInP/GaAs/Ge) solar cells due to their superior efficiency, albeit at a higher cost. The experimental approach includes fabrication, irradiation, and characterization methods. Our results show a decrease in fill factor (F.F.) and overall efficiency after irradiation, mainly caused by a decrease in shunt resistance and an increase in series resistance. In addition, open-circuit voltage (Voc) and short-circuit current (Isc) may be affected by displacement damage defects caused by the irradiation process within the active region or by the formation of new point defects., The authors would like to acknowledge the “CAI de Técnicas Físicas” of the Universidad Complutense de Madrid, ICTS – Centro Nacional de Microscopia Electrónica, to "Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas" CIEMAT, Centro Nacional de Aceleradores (CNA), Institute of Nuclear Physics of the Czech Academy of Sciences (CAS) in Prague, and finally to RADNEXT TA04-43 for the support in resources and management of entities in the process of solar cell radiation with ASCUAS project. This activity has received funding from the European Union's 2020 research and innovation program under grant agreement No 101008126, corresponding to the RADNEXT project. This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020-116508RB-I00, PID2020-117498RB-I00, PID2020-112916 GB-100 and PID2022-138434OB-C51.The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B-C21) and TransEL (TED2021-129758B-C32) funded by the Recovery and Resilience Facility of the EU. F. Pérez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for a predoctoral contract from UCM (call CT58/21-CT59/21). Sary Algaidy would also like to acknowledge financial support from the Ministry of Education in the Kingdom of Saudi Arabia. R. Benítez-Fernández acknowledge the research contract under the Investigo Program (CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of atomic layer deposition temperature on electrical and optical properties of ZnO:Al films

  • Masmitjà Rusiñol, Gerard
  • Estarlich Gil, Pau
  • López Rodríguez, Gema
  • Martín García, Isidro
  • Voz Sánchez, Cristóbal
  • Placidi, Marcel Jose
  • Torrens Dinarès, Arnau
  • Saucedo Silva, Edgardo Ademar
  • Vasquez, Pia
  • Muñoz, Delfina
  • Puigdollers i González, Joaquim
  • Ortega Villasclaras, Pablo Rafael
This work highlights the impact of growth temperature on electrical and optical properties of Al-doped ZnO (AZO) films deposited by atomic layer deposition (ALD) technique. The ALD process and super-cycle sequence have been optimized, identifying their influence on film resistivity. By using this optimum ALD procedure, the optical and electrical properties of AZO films have been widely analyzed considering the deposition temperature. Results show promising values with film resistivity in the range of 1 m¿cm and average optical absorption below 2% for 50 nm thick AZO layers. Hall effect, X-ray diffraction and ellipsometry measurements point out that these excellent values are related to their high carrier concentration and mobility, crystalline phase and optical band gap resulting in ALD AZO films with very good properties to be applied in photovoltaic devices as transparent conductive oxide electrode, This work has been supported by the Spanish government under projects PID2019-109215RB-C41 (SCALED), PID2020-115719RB-C21 (GETPV), TED2021-131778B–C22 (TROPIC) and TED2021-129758B–C32 (TransEl) funded by MCIN/AEI/10.13039/501100011033. TROPIC and TransEl projects have also support from the European Union “NextGenerationEU”/PRTR program. This work has been developing under the FOTOCER project's guidelines, which is partially funded by CDTI and MICIN Spanish government through the European Union NextGeneration/PRTR program. G. M. acknowledges financial support of the Grant – UPC Margarita Salas 2021, of the Spanish Ministry of Universities and the European Unión – NextGenerationEU. The authors wish to express their thanks to Ivan Caño for his help about XRD measurements included in the supplementary information and carried out at the Centre de Recerca en Ciència i Enginyeria Multiescala de Barcelona (CRCEMB)., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Interdigitated MgO/Au front selective contacts for enhanced photocatalytic systems based on TiO2 as light-absorber

  • Segura Blanch, Oriol
  • Ros Costals, Eloi
  • Agrelo Lestón, Asier
  • Maggi, Edoardo
  • Calvo Barrio, Lorenzo
  • Llorca Piqué, Jordi
  • Soler Turu, Lluís
  • Placidi, Marcel Jose
  • Voz Sánchez, Cristóbal
  • Saucedo Silva, Edgardo Ademar
  • Puigdollers i González, Joaquim
Selective charge extraction is a central limitation in heterogeneous photocatalysis, where short carrier diffusion lengths and interfacial recombination strongly restrict efficiency. Here we translate the photovoltaic concept of selective contacts to photocatalytic systems by designing interdigitated front architectures on a planar TiO2 absorber. Magnesium–magnesium oxide (Mg–MgOx) is used as an electron-selective layer, while gold nanoparticles act simultaneously as hole-selective contacts, plasmonic enhancers, and charge-transfer mediators toward gas-phase reactants. Interdigitated Mg–MgOx/Au patterns with controlled coverage and perimeter were fabricated on sol–gel anatase TiO2 films and tested for hydrogen production from ethanol–water vapor mixtures under UV illumination. While Au nanoparticles alone strongly enhance activity through efficient hole extraction and plasmonic effects, the addition of Mg–MgOx enables selective electron collection. However, performance is not governed by Mg–MgOx coverage alone. Samples with similar Mg–MgOx area fractions but different geometries show markedly different hydrogen production rates. To rationalize this behavior, we introduce a dimensionless geometric parameter η, defined as the normalized ratio between selective-contact perimeter and coverage. Hydrogen production follows a Langmuir–Hinshelwood-type kinetic model when expressed as a function of η, demonstrating that interfacial length, rather than area alone, controls the number of photogenerated carriers that reach adsorbed reactants before recombining. Highly interdigitated samples show up to a twofold increase in hydrogen production compared to non-patterned TiO2/Au references, despite having comparable material composition., This project received funding from the European Union’s H2020 ERC-Consolidator programme under grant agreement number no. 866018 (SENSATE), and by the Science and Innovation Ministry of Spain projects number PID2023-148976OBC41/C44 (CURIO-CITY) and PCI2023-145971-2 (ACT-FAST, CET-Partnership 2023 program), PID2022-140226OB-C31C32 (INNO-PV), PID2022-138434OB-C51 (SCALING), MICIN/FEDER PID2024-156765OB-C21, PCI2024-155100-2 (ENPOWER, CETPPartnership Program 2023), funded by MCIN/AEI/10.13039/ 501100011033/FEDER, and CNS2023-14817 (SELECTRON) funded by MCIN/AEI/10.13039/501100011033/NextGenerationEU/PRTR. Some of the authors from UPC belong to the Micro and Nanotechnologies for Solar Energy Group (MNT-Solar) Consolidated Research Group of the ‘‘Generalitat de Catalunya’’ (2021 SGR 01286). This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MICIU/AEI/10.13039/501100011033. O.S.B. is grateful to the Science and Innovation Ministry of Spain for the FPI fellowship no. PREP2023-001768. E.S. is grateful to ICREA Academia program. J.L is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya). E.R. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d’Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022., Peer Reviewed, 7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el conjunt de fonts d’energia, 7 - Energia Assequible i No Contaminant, Postprint (published version)