Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dynamics of phase transformations in Si and Ge upon strong excitation with UV femtosecond laser pulses

  • Puerto, Daniel
  • Solis, Javier
  • Siegel, Jan
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
Femtosecond laser processing of semiconductors has evolved into a mature, high-precision fabrication technique, enabling a wide range of applications. While initially most studies have employed pulses at near infrared wavelengths, the interest in using UV laser pulses is constantly increasing due to the different excitation conditions as a consequence of the much shorter optical penetration depth, leading to an improved resolution. In this context, fundamental studies on the temporal dynamics of phase transformations triggered by such pulses are necessary in order to comprehend and eventually control the complex phase transformation pathways. Here, we report a detailed time-resolved study on the phase transformation dynamics of crystalline silicon and germanium upon irradiation with single 400 nm, 100 fs laser pulses in the moderate and high excitation regime. To this end, we have employed fs-resolved optical microscopy with a probe wavelength of 800 nm to study the reflectivity evolution of the irradiated surface over a temporal window ranging from 100 fs up to 20 ns. At moderate excitation fluence, the data reveals the entire sequence of laser-induced processes, starting from the generation of a free-electron plasma, non-thermal melting, ablation onset and expansion of a semi-transparent ablation layer with sharp interfaces. At excitation with peak fluences more than 30 times the ablation threshold, an anomalous transient high-reflectivity state is observed, which might be indicative of a recoil pressure-induced liquid–liquid phase transition. Moreover, 70 nm-thick amorphous surface layers are formed in both materials after irradiation at moderate fluences. Overall, our results provide relevant information on both, transformation dynamics and final state of both materials for fs-pulse excitation in the near-UV wavelength range.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-Time 3D Visualization of the Formation of Micrograting Structures Upon Direct Laser Interference Patterning of Ge

  • Alvarez-Alegría, Miguel
  • Ruiz de Galarreta, Carlota
  • Siegel, Jan
10 pags., 8 figs., 1 tab. -- Correction added on August 11th, 2023 after first online publication: The spelling of the second author’s last name was corrected from “de Ruiz de Galarreta” to “Ruiz de Galarreta” and the formatting of equations 4–6 was fixed., Direct Laser Interference Patterning (DLIP) is a versatile technique that enables the fabrication of periodic micro- to nanometric scale structures over large areas in a variety of materials. The periodically modulated excitation pattern can be exploited to trigger a range of complex processes, including heating, melting, ablation, and matter reorganization. In this work, a novel strategy is developed to combine deep-ultraviolet (UV) DLIP (λ = 193 nm, τ = 23 ns) and real-time optical reflectivity and diffraction techniques to unravel the formation dynamics of grating structures with periods down to Λ = 740 nm. Applied to crystalline Ge wafers, single-pulse topography modulation profiles with amplitudes up to 85 nm can be imprinted. Moreover, the dynamics of the melting and solidification processes, as well as the surface topography deformation, can be followed in real-time. Combined with a model, changes in topography over time with ns resolution can be obtained. The results unambiguously reveal that the formation process of the 3D structures can only be understood when taking both Marangoni convection and thermocapillary waves into account. The technique presented here has the potential to unravel the formation dynamics of a wide range of periodic structures in other materials., This work has been partly funded by the national research grant ULS_PSB (PID2020-112770RB-C21) from the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF), as well as by research grant HyperSolar (TED2021-130894B-C22) funded by the Recovery and Resilience Facility of the EU. C.R. acknowledges a Margarita Salas grant from the Universidad Autónoma de Madrid (CA1/RSUE/2021-00829) funded by the “Next Generation EU” program of the EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amorphization and Ablation of Crystalline Silicon Using Ultrafast Lasers: Dependencies on the Pulse Duration and Irradiation Wavelength

  • García-Lechuga, Mario
  • Casquero, Noemi
  • Siegel, Jan
  • Solís Céspedes, Javier
  • Clady, Raphael
  • Wang, Andong
  • Utéza, Olivier
  • Grojo, David
17 pags., 10 figs., 2 tabs., Using lasers to achieve controlled crystallographic phase changes in silicon with high spatial precision promises new manufacturing solutions in semiconductor technologies, including silicon photonics. Recent demonstrations of improved amorphization thicknesses position ultrafast lasers as an optimum tool to meet current challenges. Here, the literature on silicon transformations is reviewed and complemented with new experimental data. This includes amorphization and ablation response as a function of pulse duration (τ = 13.9 to 134 fs at λ = 800 nm) and laser wavelength (λ = 258 to 4000 nm with τ = 200 fs pulses). For pulse duration-dependent studies on Si(111), the amorphization fluence threshold decreases with shorter durations, emphasizing the significance of non-linear absorption in the range of considered conditions. For wavelength-dependent studies, the amorphization threshold increases sharply from λ = 258 to 1030 nm, followed by near-constant behavior up to λ = 3000 nm. Conversely, the ablation threshold fluence increases in these specified ranges. Differences in the obtained amorphization thicknesses on Si(111) and Si(100) are also discussed, identifying an anomalously large fluence range for amorphization at λ = 258 nm. Finally, the question of the lateral resolution, shown as independent of the interaction nonlinearity is addressed., This work was conducted using ASUR and LaMP facilities at LP3. It has been supported by the European Union’s H2020 program (Grant agree-ments Laserlab-Europe No 871124 [project CNRS-LP3002792 and CNRS-LP300258] and ERC No 871124), grant HyperSolar (TED2021−130894B-C22) funded by MCIN/AEI/10.13039/501100011033 by “European UnionNextGenerationEU/PRTR”, grant ULS_PSB (PID2020-112770RB-C21)funded by MCIN/AEI/10.13039/501100011033, .and grant ANR-23-CE08-0029-03 funded by French National Research Agency (ANR). It was also partially funded by the CSIC through the call for internationalization i-LINK2022 (project ILINK22056). N. Casquero acknowledges a pre-doctoral fel-lowship from the MICINN. The authors acknowledge F. Chacón (Institutode Óptica, CSIC) for AFM measurement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Versatile femtosecond laser interference patterning applied to high-precision nanostructuring of silicon

  • Solana-Ramírez, Irene
  • Chacón, Fernando
  • García-Lechuga, Mario
  • Siegel, Jan
10 pags., 9 figs., We present a high-precision nanostructuring technique based on beam interference from a commercial Ti:Sa femtosecond amplified laser (800 nm, 120 fs, 1 kHz, 1 mJ). Its potential and versatility is illustrated by applying the technique to the nanostructuring of silicon. Employing commercial and ad-hoc laser-fabricated diffractive optical elements together with standard optical components, periodic line gratings and spot arrays with tunable periods down to 650 nm can readily be fabricated. Moreover, fabrication of millimeter-size diffraction gratings via multipulse irradiation at processing speeds up to 0.5 mm/s is demonstrated. The variety of structures written in crystalline silicon feature amorphous fringes and dots with widths down to 300 nm. The corresponding complex topography profiles consist of surface elevations and depressions with sizes down to 120 nm that can be controlled by the laser fluence and fringe width, demonstrating the presence of several competing matter reorganization processes in the molten phase. The exceptional high-contrast ratio of the fringe intensity together with a near-Gaussian intensity envelope of the laser spot enable patterning with well-defined local fluences, paving the way for single-pulse fluence-dependent studies. The high-quality experimental data that can be obtained with this technique can prove critical for modelling attempts aimed at unravelling the underlying formation mechanisms of complex surface topographies in a wide range of materials. Furthermore, the technique presented here has outstanding potential for the rapid and versatile fabrication of high-precision metasurfaces., This work is part of the projects ULS_PSB (PID2020-112770RB-C21), HyperSolar (TED2021-130894B-C22) and ASSESS (TED2021-129666B- C22), and has been financed by MCIN/AEI/10.13039/501100011033 (Ministry of Science and Innovation/State Agency of Investigation), FEDER (European Regional Development Fund), as well as by the European Union NextGenerationEU/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of GaP:Ti photovoltaic devices

  • Olea, J.
  • Gonzalo de los Reyes, J.
  • Siegel, Jan
  • Braña, A. F.
  • Godoy-Pérez, G.
  • Benítez-Fernández, R.
  • Caudevilla, D.
  • Algaidy, S.
  • Pérez-Zenteno, F.
  • Duarte-Cano, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Pastor, D.
  • San-Andrés, E.
  • Mártil, I.
6 pages, 6 figures, 1 table, Supersaturated GaP is of interest for the photovoltaic field since optical transitions at energies below the bandgap (2.26 eV) could enhance the overall device efficiency up to theoretically 60%. We have previously demonstrated that Ti supersaturated GaP can be obtained by means of ion implantation and pulsed-laser melting with high structural quality and measured its below-bandgap photoconductivity. In this work we report the first results of a GaP:Ti based photovoltaic device. We have fabricated and measured photovoltaic devices with a GaP:Ti absorber layer showing enhanced external quantum efficiency at wavelengths above 550 nm. Also, we have measured the absorption coefficient (around 104 cm−1) and refractive index of this absorber layer. Finally, current-voltage curves in darkness were measured and analyzed using a two-diodes model, showing improvable characteristics. Ideas to enhance the properties of the devices are suggested., Authors would like to acknowledge the “CAI de Tecnicas Físicas” of the Universidad Complutense de Madrid for the fabrication processes and “Laboratorio de Caracterizaci´ on de Superficies” of CENIM for XPS measurements. This work was partially supported by the Project MADRID-PV2 (P2018/EMT-4308) funded by the Regional Government of Madrid with the support from FEDER Funds, by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants TEC2017-84378-R, PID2020-116508RB-I00 and PID2020-117498RB-I00. The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B–C21/C22) funded by the Recovery and Resilience Facility of the EU and ALPHOMENA (PID2021-123190OB-I00) funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF). D. Caudevilla would also acknowledge the grant PRE2018-083798, financed by MICINN and European Social Fund. F. Perez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for predoctoral contract from UCM (call CT58/21-CT59/ 21). The authors would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. G. Godoy-Perez and R. Benítez-Fernandez acknowledges the research contracts under the Investigo Program (CT19/23-INVM-35 and CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social. A. F. Bra˜ na gratefully acknowledges the financial support from rom Grant No. TED2021- 129624B–C43 funded by the Spanish International Research Agency MCIN/AEI/10.13039/501100011033 and by “NextGenerationEU”/ PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning spike-like morphologies in Silicon by sustainable fs-laser processing in air for enhanced light absorption

  • Gómez-Munoz, Gonzalo
  • Benítez-Fernández, Rafael
  • Godoy-Perez, Guillermo
  • Cabello, Fatima
  • García-Pardo, Marina
  • Caudevilla, Daniel
  • Gonzalo de los Reyes, J.
  • Solís Céspedes, Javier
  • García-Lechuga, Mario
  • Olea, Javier
  • Pastor, David
  • Siegel, Jan
11 pages, 6 figures, 2 tables, In this work, we demonstrate that ultrafast laser processing (1030 nm, 290 fs) of silicon in ambient air strongly improves the material's performance in terms of absorption, both in the visible and near infrared spectral range, which paves the way for further studies on increasing the sub-bandgap absorption after texturing, suggesting the material developed as a sustainable substitute for black silicon processed in greenhouse gases atmospheres. Our approach is based on the fabrication of spike-like morphologies in ambient air and the subsequent annealing of the material by pulsed laser melting or rapid thermal annealing to recover its crystalline phase. In particular, the influence of three main processing parameters (fluence, pulse number and repetition rate) on the properties of the spike-like structures has been investigated, each of them revealing the possibility of a direct control on the size, shape and period of the spikes, and achieving a total tuning range of the period from 4 μm to 14 μm for a single laser wavelength. Macroscopic areas have been fabricated using short processing times, yielding absorption values A > 94% over the UV–VIS-NIR spectral range (250 nm - 1100 nm) without hyperdoping, and A ≥ 20% for longer wavelengths up to 2500 nm, while preserving the electrical performance of pristine silicon., This work has been supported by grant HyperSolar (TED2021-130894B-C21 and TED2021-130894B-C22) funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, grant ULS_PSB (PID2020-112770RB-C21) funded by MICIU/AEI/10.13039/501100011033, and grant HyperPHIR (PID2020-117498RB-I00) funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation), the European Regional Development Fund (ERDF) and by the Spanish Ministry of Science and Innovation. G. Godoy-Pérez and R. Benítez-Fernández acknowledge the research contracts under the Investigo Program (CT19/23-INVM-35 and CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social. The authors would like to thank David Gomez at ICTP-CSIC for performing the 45° SEM measurements. Authors want to acknowledge assistance from CAI de Técnicas Químicas (Espectroscopía Raman y Correlación) and CAI de Técnicas Físicas (Implantación Iónica) from the Universidad Complutense de Madrid for Raman measurements and RTA. We also acknowledge ICTS-CNME (Madrid, Spain) for the SEM images and EDX characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of counter-propagating solidification fronts in silicon upon femtosecond laser induced amorphization

  • García-Lechuga, Mario
  • Sopeña, Pol
  • Grojo, David
  • Siegel, Jan
11 pages, 5 figures, 1 table, We have investigated the melting and solidification dynamics in crystalline silicon upon single-pulse fs laser irradiation at a wide range of laser wavelengths (UV-mid-IR), employing real-time reflectivity measurements with ns resolution. Combining the experimental data with a simple optical model, we show that for fs excitation of Si(111) at 3000 nm wavelength a counter-propagating solidification front is initiated at the surface that competes with a solidification front originated at the maximum melt depth, propagating toward the material surface. This is the first demonstration of a surface-initiated solidification process upon fs laser excitation. The relative contribution of the two propagating interfaces has been determined as a function of pulse fluence. This process is not observed for (100) orientation, although for both orientations an amorphous surface layer with a fluence-dependent thickness is obtained. The presence of a surface-initiated solidification process is also observed for 1030 nm irradiation wavelength and might be present at other wavelengths. The results contribute to the understanding of the solidification dynamics in ultrafast laser annealing processes and form the basis for improved control of the final material state, considering its crystalline structure and transformation depth., This work was conducted using LaMP facilities at LP3. It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (Project No. ILINK22056). It has been supported by the European Union’s H2020 program (Laserlab Grant No. 871124). This work is part of the projects HyperSolar (No. TED2021-130894B-C22) and HyperSpec (No. PID2023-148178OB-C22), financed by MCIN/ AEI/10.13039/501100011033 (Ministry of Science and Innovation/ State Agency of Investigation), and the European Union NextGenerationEU/PRTR, as well as it forms part of the national research grant (No. ANR-23-CE08-0029-03) from the French National Research Agency (ANR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

“Seeing” Periodic Structures Emerge: Ultrafast Bright- and Dark-Field Microscopy During Femtosecond Laser Interference Patterning of Silicon

  • Solana-Ramírez, Irene
  • Siegel, Jan
11 pages, 5 figures, Micro- and nanopatterning of materials using ultrafast lasers has evolved into a powerful technology for device fabrication, largely owed to its versatility and single-step performance compared to conventional lithography techniques. Yet, for the ultimate optimization of the fabricated patterns, it is necessary to comprehend the complex transformation pathways of the material at the extreme excitation intensities used. Here, a method is reported to investigate these pathways for laser interference patterning with femtosecond temporal and sub-micrometer spatial resolution over the entire transformation window up to the nanosecond regime. Specifically, an ultrafast bright-field pump-probe microscopy setup combined with a line patterning system is developed to imprint amorphous and ablative line-like structures with a 2.2 µm period in crystalline silicon using single 800 nm, 120 fs laser pulses. This system provides direct access to the dynamics of free electron generation, melting, amorphization, and ablation as a function of pulse fluence. By adding a dark-field modality, the complex dynamics of structural elevation can be resolved and quantified. The technique can be applied to any material with polished surfaces, thus offering direct access to in situ studies of their individual transformation dynamics during laser patterning., This work is part of the projects HyperSpec (Grant No. PID2023-148178OB-C22) funded by MCIN/AEI/10.13039/501100011033,HyperSolar (Grant No. TED2021-130894B-C22) funded by MCIN/AEI/10.13039/501100011033, and the European Union NextGen-erationEU/PRTR, as well MATRIX-CM (TEC-2024/TEC-85) funded bythe Consejería de Educación, Ciencia y Universidades (Comunidadde Madrid, Spain)). This research was also supported by the Spanish Ministry of Education, Science, and Universities via a doctoral grant tothe first author (FPU23/01300, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct laser interference patterning meets laser-induced periodic surface structures: hybrid dual periodic laser patterning of semiconductors

  • Solana, Irene
  • Aiartza, Eneko
  • Chacon, Fernando
  • Siegel, Jan
18 pages, 11 figures, 2 tables, The fabrication of micro- and nanometric structures in semiconductors with ultrashort laser pulses offers enormous potential due to their tunable morphological, electronic and optical properties. Two well-established methods for this purpose are patterning based on laser-induced periodic surface structures (LIPSS) and direct laser interference patterning (DLIP). As both techniques rely on different physical phenomena, a combination of both approaches is feasible, allowing a wide range of opportunities for high-precision laser patterning by superimposing LIPSS in a DLIP pattern. Here, we report the fabrication of hybrid nanostructures in silicon and germanium by multipulse femtosecond laser irradiation (λ = 800 nm, τ = 120 fs) in a versatile DLIP configuration. This configuration allows control of the fringe modulation depth (100%-0%), the DLIP pattern type (fringes or dots) and their period (5 µm-1.25 µm). For fringe patterning, linear laser polarization either parallel or perpendicular to the DLIP fringes is used, leading to single or dual LIPSS with different periods along both plane directions depending on the irradiation conditions. These results show that this strategy allows us to achieve highly tunable LIPSS periods, far beyond the conventional scaling of λ, λ/2 and λ/4. The results reported here explore a promising new pathway for the fabrication of functional surfaces with controllable periods in two dimensions for a wide range of potential applications in relevant fields such as photonics and coating technologies., This work is part of the projects HyperSolar (TED2021130894B-C22), HyperSpec (PID2023-148178OB-C22), MATRIX-CM (TEC-2024/TEC-85) and ASSESS (TED2021-129666B-C22), and has been financed by MCIN/AEI/10.13039/501100011033 (Ministry of Science and Innovation/State Agency of Investigation), Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)), FEDER (European Regional Development Fund), as well as by the European Union NextGenerationEU/PRTR. We acknowledge the service from the MiNa Laboratory at IMN. This research was supported by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant to the first author (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality fs-laser structured Si in air for optoelectronic applications

  • Benítez-Fernández, Rafael
  • Gómez-Muñoz, Gonzalo
  • García-Hemme, Eric
  • Roca–Giménez, Núria
  • Cabello, Fátima
  • García-Pardo, Marina
  • Gonzalo de los Reyes, José
  • Solís Céspedes, Javier
  • Prado, Álvaro del
  • García-Lechuga, Mario
  • Olea, Javier
  • Siegel, Jan
  • Pastor, David
10 pages, 10 figures, In this work, we describe a methodology to highly improve the quality of micro-structured silicon obtained by femtosecond-laser irradiation in ambient air atmosphere. Optimum femtosecond laser irradiation conditions have been selected to obtain a high aspect ratio spike morphology at the surface of silicon. Due to the aggressive fs-laser process, the crystalline structure of the material presents extended defects, which can be removed by rapid thermal annealing. Moreover, thermal annealing triggers diffusion of oxygen to the surface, which was incorporated from the air atmosphere into the bulk upon repetitive fs-laser irradiation. This oxygen binds with silicon atoms within the amorphous surface layer, giving rise to SiOx, obtaining irregular decorations at the surface of the spike structures. These decorations can be removed by a buffered hydrofluoric acid solution, which etches the silicon oxide but not the crystalline silicon. Using this strategy we have obtained a high crystalline quality with: high absorption of around 95 % in the wavelength region from 200 to 1100 nm, minimized defect-related absorption from 1100 to 2500 nm; a crystalline lattice free of defects and oxygen; and a high aspect-ratio micro-spike morphology formed by c-Si free of surface SiO<inf>x</inf> nano-decorations that can be useful to fabricate optoelectronic devices., This work has been supported by grant HyperSolar (TED2021130894B-C21 and TED2021-130894B-C22) funded by MICIU/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grant HyperSpec (PID2023-148178OB-C21 and PID2023‑148178OB-C22) funded by MICIU/AEI/10.13039/ 501100011033 and by ERDF/EU, grant MATRIX-CM ((TEC-2024/TEC- 85), funded by Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)). The support of the Regional Government of Madrid through the Project 4EVERPV-CM (TEC-2024/ECO-72) is acknowledged. This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020- 116508RB-I00 and PID2020–117498RB-I00. R. Benítez-Fernandez acknowledges the predoctoral contract from Comunidad Autonoma de Madrid (PIPF-2023/ECO-30541). Authors want to acknowledge assistance from CAI de Tecnicas Químicas (Espectroscopía Raman y Correlacion) for the Raman measurements and CAI de Tecnicas Físicas (Implantaci on Ionica) from the Universidad Complutense de Madrid for the RTA processes. We also acknowledge ICTS-CNME (Madrid, Spain) for the SEM, TEM and STEM images, EDS and EDX characterization. Authors also acknowledge Servicio de Nanotecnología y Analisis de Superficies del CACTI de la Universidad de Vigo for ToF-SIMS measurements. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza, Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

High-quality fs-laser structured Si in air for optoelectronic applications

  • Benítez Fernández, Rafael
  • Gomez-Munoz, Gonzalo
  • García Hemme, Eric
  • Roca Giménez, Nuria
  • Cabello, Fátima
  • García Pardo, Marina
  • Gonzalo, Jose
  • Solis, Javier
  • Prado Millán, Álvaro Del
  • GarciaLechuga, Mario
  • Olea Ariza, Javier
  • Siegel, Jan
  • Pastor Pastor, David
In this work, we describe a methodology to highly improve the quality of micro-structured silicon obtained by femtosecond-laser irradiation in ambient air atmosphere. Optimum femtosecond laser irradiation conditions have been selected to obtain a high aspect ratio spike morphology at the surface of silicon. Due to the aggressive fs-laser process, the crystalline structure of the material presents extended defects, which can be removed by rapid thermal annealing. Moreover, thermal annealing triggers diffusion of oxygen to the surface, which was incorporated from the air atmosphere into the bulk upon repetitive fs-laser irradiation. This oxygen binds with silicon atoms within the amorphous surface layer, giving rise to SiOx, obtaining irregular decorations at the surface of the spike structures. These decorations can be removed by a buffered hydrofluoric acid solution, which etches the silicon oxide but not the crystalline silicon. Using this strategy we have obtained a high crystalline quality with: high absorption of around 95 % in the wavelength region from 200 to 1100 nm, minimized defect-related absorption from 1100 to 2500 nm; a crystalline lattice free of defects and oxygen; and a high aspect-ratio micro-spike morphology formed by c-Si free of surface SiOx nano-decorations that can be useful to fabricate optoelectronic devices.