Pasar al contenido principal

CONTACTOS SELECTIVOS EMERGENTES PARA CELULAS SOLARES DE SI SIN DOPADO FABRICADOS MEDIANTE PULVERIZACION DE ALTA PRESION

PID2020-116508RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Ti supersaturated Si by microwave annealing processes

  • Olea Ariza, Javier
  • González Díaz, Germán
  • Pastor Pastor, David
  • García Hemme, Eric
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • García Hernansanz, Rodrigo
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
  • Lee, Yao-Jen
  • Hong, Tzu-Chieh
  • Chao, Tien-Sheng
Microwave annealing (MWA) processes were used for the first time to obtain Ti supersaturated Si. High Ti doses were ion implanted on Si substrates and subsequently MWA processed to recrystallize the amorphous layer. The resulting layers were monocrystalline with a high density of defects. Ti depth profiles indicate that diffusion is avoided once recrystallization is produced. Finally, the electronic transport properties measurements point to a decoupling effect between the Si:Ti layer and the substrate. The implanted layer present also a shallow donor and very high Hall mobility.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Optical, Electrical, and Optoelectronic Characterization of Ti-Supersaturated Gallium Arsenide

  • Algaidy, Sari
  • Caudevilla Gutiérrez, Daniel
  • Godoy Pérez, Guillermo
  • Benítez Fernández, Rafael
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • García Hernansanz, Rodrigo
  • San Andrés Serrano, Enrique
  • García Hemme, Eric
  • Olea Ariza, Javier
  • Siegel, Jan
  • Gonzalo, José
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
Herein, a detailed investigation on the properties of supersaturated gallium arsenide (GaAs) using Ti+ implantation followed by nanosecond pulsed laser melting (PLM) is presented. The supersaturated samples are analyzed by means of electrical, optical, and optoelectronic characterization. The sheet resistance results obtained using van der Pauw configuration measurements do not show activation of the implanted Ti+ in semi-insulating GaAs after PLM. Absorptance measurements show a sub-bandgap absorption (up to 6.5% for λ = 1000 nm) of the supersaturated GaAs:Ti and the just PLM-processed GaAs, with the same laser melting fluence used (0.50 J/cm−2). The origin of this sub-bandgap absorption is analyzed. Optoelectronic measurements show a similar sub-bandgap photo-response related to the absorption analyzed. The photo-response measured below the bandgap originates from point defects introduced by the PLM process.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Hyperdoped silicon materials: from basic materials properties to sub-bandgap infrared photodetectors

  • Sher, Meng-Ju
  • García Hemme, Eric
Hyperdoping silicon, which introduces deep-level dopants into Si at concentrations near one atomic percent, drastically changes its optoelectronic properties. We review recent progress in the fundamental understanding of the material properties and state of the art sub-bandgap infrared photodetectors. Different hyperdoping techniques are reviewed and compared, namely ion implantation followed by pulsed laser melting (PLM) or other fast annealing methods and PLM of Si with a dopant precursor. We review data available in the literature for material properties related to the success of optoelectronic devices such as the charge carrier lifetime, mobility, and sub-bandgap light absorption of hyperdoped Si with different dopants. To maximize carrier generation and collection efficiency in a sub-bandgap photodetector, charge carrier lifetimes must be long enough to be transported through the hyperdoped layer, which should be on the order of light absorption depth. Lastly, the charge transport properties and photodetector responsivities of hyperdoped Si based photodiodes at room temperature and at cryogenic temperatures are compared. The charge carrier transport mechanisms at different temperature ranges and in different dopant systems are discussed. At room temperature, despite different dopant energetics and hyperdoped thicknesses, light detection exhibits similar spectral responsivities with a common cutoff around 0.5 eV, and at low temperatures, it extends further into the infrared range. The roles of the dopant energetics and process-induced defects are discussed. We highlight future material development directions for enhancing device performance.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Characterization of TiOx as electron selective contact using low-temperature oxidation process via high-pressure sputtering, Characterization of TiOx as electron selective contact using low-temperature oxidation process via high-pressure sputtering

  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • Benítez Fernández, Rafael
  • Godoy Pérez, Guillermo
  • Torres, I.
  • Barrio, R.
  • Rebohle, L.
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hernansanz, Rodrigo
  • Olea Ariza, Javier
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
  • García Hemme, Eric
  • San Andrés Serrano, Enrique
Docta Complutense
Publicación Artículo científico (JournalArticle)

Characterization of Cr implanted GaAs processed with ArF and Nd-YAG laser melting

  • Algaidy, Sari
  • Caudevilla Gutiérrez, Daniel
  • Benítez Fernández, Rafael
  • Duarte Cano, Sebastián
  • Pérez Zenteno, Francisco José
  • García Hernansanz, Rodrigo
  • San Andrés Serrano, Enrique
  • García Hemme, Eric
  • Olea Ariza, Javier
  • Siegel, Jan
  • Gonzalo, José
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
We present a detailed investigation on the properties of supersaturated GaAs using Cr implantation followed by nanosecond pulsed laser melting (PLM). A comparison between two different lasers was carried out (ArF and Nd:YAG). We have analyzed supersaturated samples by means of structural, electrical, optical, and optoelectronic techniques. Raman spectroscopy and Transmission electron microscopy results show a recovery of crystallinity after the PLM process. ToF-SIMS results reveal a Cr concentration above the solid solubility limit after the PLM process, featuring depth distribution depending on the type of laser used. The sheet resistance results obtained using van der Pauw configuration measurements show an activation of the implanted Cr in semi-insulating GaAs after PLM. Optical transmittance and Reflectance measurements show a sub-bandgap absorption (up to 10% for λ = 1250 nm) of the supersaturated GaAs:Cr related to the Cr incorporation, besides absorption induced by the PLM process itself. The origin of this sub-bandgap absorption has been analyzed by means of opto-electronic measurements revealing sub-bandgap photoresponsivity related to the absorption analyzed. The photoresponsivity measured below the bandgap originates from both the defects introduced by the PLM process and the states within the bandgap associated to the implanted Cr.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Proton irradiation effects on silicon heterojunction solar cells with MoOx selective contacts

  • Duarte Cano, Sebastián
  • Pérez Zenteno, Francisco José
  • Caudevilla Gutiérrez, Daniel
  • Olea Ariza, Javier
  • San Andrés Serrano, Enrique
  • Prado Millán, Álvaro Del
  • Benítez Fernández, Rafael
  • García Hemme, Eric
  • Rezaei, Mohammadreza
  • Clemente Barreira, Juan Antonio
  • Algaidy, S.
  • Torres, I.
  • Barrio, R.
  • Ros, E.
  • Puigdollers, J.
  • Ortega, P.
  • Voz, C.
  • García Hernansanz, Rodrigo
In this study, we investigate the effects of proton irradiation on silicon-based heterojunction and molybdenum oxide (MoOx) selective contact solar cells. The main idea is to study their potential application in small satellites for measurement and monitoring. The irradiation dose simulates the aggressive environment found in Low Earth Orbit (LEO), where many satellites currently use Group III-VI (GaInP/GaAs/Ge) solar cells due to their superior efficiency, albeit at a higher cost. The experimental approach includes fabrication, irradiation, and characterization methods. Our results show a decrease in fill factor (F.F.) and overall efficiency after irradiation, mainly caused by a decrease in shunt resistance and an increase in series resistance. In addition, open-circuit voltage (Voc) and short-circuit current (Isc) may be affected by displacement damage defects caused by the irradiation process within the active region or by the formation of new point defects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality single-crystalline epitaxial regrowth on pulsed laser melting of Ti implanted GaAs

  • Algaidy, S.
  • Caudevilla, D.
  • Perez-Zenteno, F.
  • García-Hernansanz, R.
  • García-Hemme, E.
  • Olea, J.
  • San Andrés, E.
  • Duarte-Cano, S.
  • Siegel, Jan
  • Gonzalo de los Reyes, J.
  • Pastor, D.
  • Prado, A. del
8 pags., 8 figs., We present a detailed investigation on the formation of supersaturated GaAs using Ti+ implantation followed by nanosecond Pulsed Laser Melting (PLM). We have synthesized high-crystal quality supersaturated GaAs layers with concentrations of Ti above the insulator to metal transition (Mott limit). The Ti-implanted concentration depth profiles after PLM obtained by Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) show a redistribution of Ti impurities within the first hundred nanometers and superficial concentration up to 1 × 1021 cm−3. Raman spectroscopy of these Ti supersaturated, and regrown GaAs samples shows a sharp crystalline peak and tensile strain due to the Ti lattice incorporation. Scanning Transmission Electron Microscopy (STEM) and high-resolution Transmission Electron Microscopy (TEM) images show a good GaAs crystallinity after the PLM process. Energy-Dispersive X-ray Spectroscopy (EDS) reveals an enhanced Ti signal inside bubble-like structures and an appearance of interface oxide layer with all processed samples., Authors would like to acknowledge C.A.I. de Tecnicas Físicas of the Universidad Complutense de Madrid for ion implantation, and the technical. This work was partially supported by the Project MADRIDPV2 (Grant No. P20138/EMT-4308) funded by the Comunidad Autonoma de Madrid with the support of FEDER funds, by the Spanish MINECO (Ministerio de Economía y Competitividad) under grants PID2020-116508RB-I00, PID2020-117498RB-I00 and RTI2018-096498-B-I00. One of the authors (S. Algaidy) would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. D.Caudevilla would also like to acknowledge a grant (PRE2018-083798), financed by MICINN and European Social Fund. F. Perez-Zenteno would like to acknowledge financial support Mexico grant program CONACyT under grant 786327. The authors would like to also acknowledge the services of CAI de Espectroscopia of UCM, (INA-LMA) de Universidad de Zaragoza and C.A.C.T.I de Universidad de Vigo for Raman, FIB-SEM and SIMS, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical, Electrical, and Optoelectronic Characterization of Ti-Supersaturated Gallium Arsenide

  • Algaidy, Sari
  • Caudevilla, Daniel
  • Godoy-Pérez, Guillermo
  • Benítez-Fernández, Rafael
  • Pérez-Zenteno, Francisco
  • Duarte-Cano, Sebastián
  • García-Hernansanz, Rodrigo
  • San Andrés, Enrique
  • García-Hemme, Eric
  • Olea, Javier
  • Siegel, Jan
  • Gonzalo de los Reyes, J.
  • Pastor, David
  • Prado, Álvaro del
9 pags., 6 figs., 1 tab., Herein, a detailed investigation on the properties of supersaturated gallium arsenide (GaAs) using Ti+ implantation followed by nanosecond pulsed laser melting (PLM) is presented. The supersaturated samples are analyzed by means of electrical, optical, and optoelectronic characterization. The sheet resistance results obtained using van der Pauw configuration measurements do not show activation of the implanted Ti+ in semi-insulating GaAs after PLM. Absorptance measurements show a sub-bandgap absorption (up to 6.5% for λ = 1000 nm) of the supersaturated GaAs:Ti and the just PLM-processed GaAs, with the same laser melting fluence used (0.50 J/cm−2). The origin of this sub-bandgap absorption is analyzed. Optoelectronic measurements show a similar sub-bandgap photo-response related to the absorption analyzed. The photo-response measured below the bandgap originates from point defects introduced by the PLM process., The authors would like to acknowledge the “CAI de Técnicas Físicas” of the Universidad Complutense de Madrid for the fabrication processes. Authors also acknowledge Servicio de Nanotecnología y Análisis deSuperficies del CACTI de la Universidad de Vigo for ToF–SIMS measure-ments. The authors acknowledge the use of instrumentation as well as thetechnical advice provided by the National Facility ELECMI ICTS, node“Laboratorio de Microscopías Avanzadas” at University of Zaragoza and ICTS–CNM from Madrid for the TEM images. This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research andInnovation) and the European Regional Development Fund (ERDF) undergrant nos. PID2020-116508RB-I00 and PID2020-117498RB-I00. The authorsalso acknowledge financial support via research grants HyperSolar (TED2021-130894B-C21/C22) funded by the Recovery and ResilienceFacility of the EU. D. Caudevilla would also acknowledge the grant no.PRE2018-083798, financed by MICINN and European Social Fund. F.Pérez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for predoctoral contract from UCM (call CT58/21-CT59/21). The authors would also like to acknowledge financial support from the Ministry of Education in the Kingdom of SaudiArabia. G. Godoy-Pérez and R. Benítez-Fernández acknowledge the research contracts under the Investigo Program (grant nos. CT19/23-INVM-35 andCT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of GaP:Ti photovoltaic devices

  • Olea, J.
  • Gonzalo de los Reyes, J.
  • Siegel, Jan
  • Braña, A. F.
  • Godoy-Pérez, G.
  • Benítez-Fernández, R.
  • Caudevilla, D.
  • Algaidy, S.
  • Pérez-Zenteno, F.
  • Duarte-Cano, S.
  • Prado, A. del
  • García-Hemme, E.
  • García-Hernansanz, R.
  • Pastor, D.
  • San-Andrés, E.
  • Mártil, I.
6 pages, 6 figures, 1 table, Supersaturated GaP is of interest for the photovoltaic field since optical transitions at energies below the bandgap (2.26 eV) could enhance the overall device efficiency up to theoretically 60%. We have previously demonstrated that Ti supersaturated GaP can be obtained by means of ion implantation and pulsed-laser melting with high structural quality and measured its below-bandgap photoconductivity. In this work we report the first results of a GaP:Ti based photovoltaic device. We have fabricated and measured photovoltaic devices with a GaP:Ti absorber layer showing enhanced external quantum efficiency at wavelengths above 550 nm. Also, we have measured the absorption coefficient (around 104 cm−1) and refractive index of this absorber layer. Finally, current-voltage curves in darkness were measured and analyzed using a two-diodes model, showing improvable characteristics. Ideas to enhance the properties of the devices are suggested., Authors would like to acknowledge the “CAI de Tecnicas Físicas” of the Universidad Complutense de Madrid for the fabrication processes and “Laboratorio de Caracterizaci´ on de Superficies” of CENIM for XPS measurements. This work was partially supported by the Project MADRID-PV2 (P2018/EMT-4308) funded by the Regional Government of Madrid with the support from FEDER Funds, by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants TEC2017-84378-R, PID2020-116508RB-I00 and PID2020-117498RB-I00. The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B–C21/C22) funded by the Recovery and Resilience Facility of the EU and ALPHOMENA (PID2021-123190OB-I00) funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF). D. Caudevilla would also acknowledge the grant PRE2018-083798, financed by MICINN and European Social Fund. F. Perez-Zenteno is also thankful for financial collaboration from the Mexican grants program CONACyT and for predoctoral contract from UCM (call CT58/21-CT59/ 21). The authors would also like to acknowledge financial support from Ministry of Education in the Kingdom of Saudi Arabia. G. Godoy-Perez and R. Benítez-Fernandez acknowledges the research contracts under the Investigo Program (CT19/23-INVM-35 and CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social. A. F. Bra˜ na gratefully acknowledges the financial support from rom Grant No. TED2021- 129624B–C43 funded by the Spanish International Research Agency MCIN/AEI/10.13039/501100011033 and by “NextGenerationEU”/ PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of Cr implanted GaAs processed with ArF and Nd-YAG laser melting

  • Algaidy, Sari
  • Caudevilla, Daniel
  • Benítez-Fernández, Rafael
  • Duarte-Cano, Sebastián
  • Pérez-Zenteno, Francisco
  • García-Hernansanz, Rodrigo
  • San Andres, Enrique
  • García-Hemme, Eric
  • Olea, Javier
  • Siegel, Jan
  • Gonzalo de los Reyes, J.
  • Pastor, David
  • Del Prado, Alvaro
14 pages, 9 figures, 2 tables . -- Special Issue on Ultra-doped Semiconductors for Electronic, Photonic and Spintronic Applications, We present a detailed investigation on the properties of supersaturated GaAs using Cr implantation followed by nanosecond pulsed laser melting (PLM). A comparison between two different lasers was carried out (ArF and Nd:YAG). We have analyzed supersaturated samples by means of structural, electrical, optical, and optoelectronic techniques. Raman spectroscopy and Transmission electron microscopy results show a recovery of crystallinity after the PLM process. ToF-SIMS results reveal a Cr concentration above the solid solubility limit after the PLM process, featuring depth distribution depending on the type of laser used. The sheet resistance results obtained using van der Pauw configuration measurements show an activation of the implanted Cr in semi-insulating GaAs after PLM. Optical transmittance and Reflectance measurements show a sub-bandgap absorption (up to 10% for λ = 1250 nm) of the supersaturated GaAs:Cr related to the Cr incorporation, besides absorption induced by the PLM process itself. The origin of this sub-bandgap absorption has been analyzed by means of opto-electronic measurements revealing sub-bandgap photoresponsivity related to the absorption analyzed. The photoresponsivity measured below the bandgap originates from both the defects introduced by the PLM process and the states within the bandgap associated to the implanted Cr., This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under Grants PID2020-116508RB-I00, PID2023-149369OBC21 and PID2023-148178OB-C21/C22. The authors also acknowledge financial support via research grants HyperSolar (TED2021-130894B-C21) funded by the Recovery and Resilience Facility of the EU. The authors would also like to acknowledge financial support from the Ministry of Education in the Kingdom of Saudi Arabia. F Pérez-Zenteno is also thankful for predoctoral contract from UCM (call CT58/21CT59/21). R Benítez-Fernández acknowledges the predoctoral contract from Comunidad Autónoma de Madrid (PIPF2023/ECO-30541). The authors would like to acknowledge the support of the regional government of Madrid through the Project 4EVERPV-CM (TEC-2024/ECO-72)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality fs-laser structured Si in air for optoelectronic applications

  • Benítez-Fernández, Rafael
  • Gómez-Muñoz, Gonzalo
  • García-Hemme, Eric
  • Roca–Giménez, Núria
  • Cabello, Fátima
  • García-Pardo, Marina
  • Gonzalo de los Reyes, José
  • Solís Céspedes, Javier
  • Prado, Álvaro del
  • García-Lechuga, Mario
  • Olea, Javier
  • Siegel, Jan
  • Pastor, David
10 pages, 10 figures, In this work, we describe a methodology to highly improve the quality of micro-structured silicon obtained by femtosecond-laser irradiation in ambient air atmosphere. Optimum femtosecond laser irradiation conditions have been selected to obtain a high aspect ratio spike morphology at the surface of silicon. Due to the aggressive fs-laser process, the crystalline structure of the material presents extended defects, which can be removed by rapid thermal annealing. Moreover, thermal annealing triggers diffusion of oxygen to the surface, which was incorporated from the air atmosphere into the bulk upon repetitive fs-laser irradiation. This oxygen binds with silicon atoms within the amorphous surface layer, giving rise to SiOx, obtaining irregular decorations at the surface of the spike structures. These decorations can be removed by a buffered hydrofluoric acid solution, which etches the silicon oxide but not the crystalline silicon. Using this strategy we have obtained a high crystalline quality with: high absorption of around 95 % in the wavelength region from 200 to 1100 nm, minimized defect-related absorption from 1100 to 2500 nm; a crystalline lattice free of defects and oxygen; and a high aspect-ratio micro-spike morphology formed by c-Si free of surface SiO<inf>x</inf> nano-decorations that can be useful to fabricate optoelectronic devices., This work has been supported by grant HyperSolar (TED2021130894B-C21 and TED2021-130894B-C22) funded by MICIU/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grant HyperSpec (PID2023-148178OB-C21 and PID2023‑148178OB-C22) funded by MICIU/AEI/10.13039/ 501100011033 and by ERDF/EU, grant MATRIX-CM ((TEC-2024/TEC- 85), funded by Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)). The support of the Regional Government of Madrid through the Project 4EVERPV-CM (TEC-2024/ECO-72) is acknowledged. This work was partially supported by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020- 116508RB-I00 and PID2020–117498RB-I00. R. Benítez-Fernandez acknowledges the predoctoral contract from Comunidad Autonoma de Madrid (PIPF-2023/ECO-30541). Authors want to acknowledge assistance from CAI de Tecnicas Químicas (Espectroscopía Raman y Correlacion) for the Raman measurements and CAI de Tecnicas Físicas (Implantaci on Ionica) from the Universidad Complutense de Madrid for the RTA processes. We also acknowledge ICTS-CNME (Madrid, Spain) for the SEM, TEM and STEM images, EDS and EDX characterization. Authors also acknowledge Servicio de Nanotecnología y Analisis de Superficies del CACTI de la Universidad de Vigo for ToF-SIMS measurements. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza, Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Inversion charge study in TMO hole-selective contact based solar cells

  • García Hernansanz, Rodrigo
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hemme, Eric
  • Olea Ariza, Javier
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
  • Ros, Eloy
  • Puigdollers, Joaquim
  • Ortega, Pablo
  • Voz, Cristobal
In this article, we study the effect of the inversion charge ( Q _inv ) in a solar cell based on the hole-selective characteristic of substoichiometric molybdenum oxide (MoO_x ) and vanadium oxide (VO_x ) deposited directly on n-type silicon. We measure the capacitance–voltage ( C – V ) curves of the solar cells at different frequencies and explain the results taking into account the variation of the space charge and the existence of Q_inv in the c-Si inverted region. The high-frequency capacitance measurements follow the Schottky metal–semiconductor theory, pointing to a low inversion charge influence in these measurements. However, for frequencies lower than 20 kHz, an increase in the capacitance is observed, which we relate to the contribution of the inversion charge. In addition, applying the metal–semiconductor theory to the high-frequency measurements, we have obtained the built-in voltage potential and show new evidence about the nature of the conduction process in this structure. This article provides a better understanding of the transition metal oxide/n-type crystalline silicon heterocontact.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Native Oxide Layer Role during Cryogenic-Temperature Ion Implantations in Germanium

  • Caudevilla Gutiérrez, Daniel
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • Algaidy, Sari
  • Benítez Fernández, Rafael
  • Godoy Pérez, Guillermo
  • Olea Ariza, Javier
  • San Andrés Serrano, Enrique
  • García Hernansanz, Rodrigo
  • Prado Millán, Álvaro Del
  • Martil De La Plaza, Ignacio
  • Pastor Pastor, David
  • García Hemme, Eric
Herein, the structural properties and chemical composition of Ge samples implanted with tellurium at cryogenic temperatures are analyzed, focusing on the role of the native oxide. For germanium, cryogenic-temperature implantation is a requirement to achieve hyperdoped impurity concentrations while simultaneously preventing surface porosity. In this work, the critical role of the thin native germanium oxide is demonstrated when performing ion implantations at temperatures close to the liquid nitrogen temperature. The structural and chemical composition of tellurium-implanted samples as a function of the implanted dose from 5 × 1014 to 5 × 1015 cm−2 is analyzed. After a laser melting process, the incorporated oxygen is diffused to the surface forming again a GeOx layer which retains a large fraction of the total implanted dose. These detrimental effects can be eliminated by a selective etching of the native oxide layer prior to the ion implantation process. These effects have been also observed when implanting on Si substrates. This work identifies key aspects for conducting implantations at cryogenic temperatures, that are otherwise negligible for ion implanting at room temperature.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Electronic transport properties of Ti-supersaturated Si processed by rapid thermal annealing or pulsed-laser melting

  • Olea Ariza, Javier
  • González Díaz, Germán
  • Pastor Pastor, David
  • García Hemme, Eric
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • García Hernansanz, Rodrigo
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
In the scope of supersaturated semiconductors for infrared detectors, we implanted Si samples with Ti at high doses and processed them by rapid thermal annealing (RTA) to recover the crystal quality. Also, for comparative purposes, some samples were processed by pulsed-laser melting. We measured the electronic transport properties at variable temperatures and analyzed the results. The results indicate that, for RTA samples, surface layers with a high Ti concentration have negligible conductivity due to defects. In contrast, the implantation tail region has measurable conductivity due to very high electron mobility. This region shows the activation of a very shallow donor and a deep donor level. While deep levels have been previously reported for Ti in Si, such a shallow level has never been measured, and we suggest that it originates from Ti-Si complexes. Finally, a decoupling effect between the implanted layer and the substrate seems to be present, and a bilayer model is applied to fit the measured properties. The fitted parameters follow the Meyer–Neldel rule. The role of the implantation tails in Si supersaturated with Ti is revealed in this work.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Indium tin oxide obtained by high pressure sputtering for emerging selective contacts in photovoltaic cells

  • Caudevilla Gutiérrez, Daniel
  • García Hemme, Eric
  • San Andrés Serrano, Enrique
  • Pérez Zenteno, Francisco José
  • Torres, I.
  • Barrio, R.
  • García Hernansanz, Rodrigo
  • Algaidy, Sari
  • Olea Ariza, Javier
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
This article studies the physical and electrical behavior of indium tin oxide layers (ITO) grown by an unconventional technique: High Pressure Sputtering (HPS), from a ceramic ITO target in a pure Ar atmosphere. This technique has the potential to reduce plasma induced damage to the samples. The aim is to obtain, at low temperature via HPS, good quality transparent conductive oxide layers for experimental photovoltaic cells with emerging selective contacts such as transition metal oxides, alkaline metal fluorides, etc. We found that the resistivity of the films was strongly dependent on Ar pressure. To obtain device-quality resistivity without intentional heating during deposition a pressure higher than 1.0 mbar was needed. These films deposited on glass were amorphous, presented a high electron mobility (up to 45 cm2V- 1s- 1) and a high carrier density (2.9 x 1020 cm-3 for the sample with the highest mobility). The optimum Ar pressure range was found at 1.5-2.3 mbar. However, the resistivity degraded with a moderate annealing temperature in air. Finally, the feasibility of the integration with photovoltaic cells was assessed by depositing on Si substrates passivated by a-Si:H. The film deposited at 1.5 mbar was uniform and amorphous, and the carrier lifetime obtained was 1.22 ms with an implied open circuit voltage of 719 mV after a 215 degrees C air anneal. The antireflective properties of HPS ITO were also demonstrated. These results show that ITO deposited by HPS is adequate for the research of solar cells with emerging selective contacts.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Transparent conductive aluminum-zinc oxide layers deposited by high pressure sputtering

  • Duarte-Cano, S.
  • Torrecilla, L.
  • Pérez Zenteno, Francisco José
  • Benítez Fernández, Rafael
  • García Hemme, Eric
  • Olea Ariza, Javier
  • Pastor Pastor, David
  • Prado Millán, Álvaro Del
  • Martil De La Plaza, Ignacio
  • San Andrés Serrano, Enrique
  • Caudevilla Gutiérrez, Daniel
  • Roca-Giménez, N.
  • García Hernansanz, Rodrigo
High-pressure sputtering (HPS) is an unconventional method used to deposit various materials, including transparent conductive oxides. This article sets out to investigate aluminum-doped zinc oxide (AZO), a material widely used in solar cells. The aim of this work is to examine the properties of AZO films deposited by HPS and evaluate this method as a viable alternative to conventional deposition techniques. To characterize the films, techniques such as grazing incidence X-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) were used to analyze their structure, composition, and surface morphology. Optical characterization showed high transparency in the visible range and optical band gap (Eg) values between 3.41 and 3.60 eV. Additionally, electrical properties were evaluated using the Hall effect and van der Pauw method measurements, revealing resistivities in the range of 5 & sdot;10- 3 Omega & sdot;cm. A direct correlation was observed between the increase in deposition pressure and the carrier concentration. We found that this increase in carrier concentration causes the observed rise in the band gap value, as a result of the Burstein-Moss effect. The results indicate that pressures in the 1.0-1.4 mbar range produce smooth films with high optical transparency and low electrical resistivity, associated with a high carrier concentration. However, at higher pressures (2.2 mbar) the films exhibit greater roughness and a decrease in carrier mobility, despite the increase in carrier concentration. The highest value of Haacke's figure of merit was obtained for the sample deposited at 1.4 mbar. The results obtained demonstrate that AZO deposited by HPS exhibits properties comparable to those obtained by other deposition methods, establishing it as a scalable and cost-effective alternative for next-generation solar cells.
Docta Complutense
Publicación Artículo científico (JournalArticle)

High-quality fs-laser structured Si in air for optoelectronic applications

  • Benítez Fernández, Rafael
  • Gomez-Munoz, Gonzalo
  • García Hemme, Eric
  • Roca Giménez, Nuria
  • Cabello, Fátima
  • García Pardo, Marina
  • Gonzalo, Jose
  • Solis, Javier
  • Prado Millán, Álvaro Del
  • GarciaLechuga, Mario
  • Olea Ariza, Javier
  • Siegel, Jan
  • Pastor Pastor, David
In this work, we describe a methodology to highly improve the quality of micro-structured silicon obtained by femtosecond-laser irradiation in ambient air atmosphere. Optimum femtosecond laser irradiation conditions have been selected to obtain a high aspect ratio spike morphology at the surface of silicon. Due to the aggressive fs-laser process, the crystalline structure of the material presents extended defects, which can be removed by rapid thermal annealing. Moreover, thermal annealing triggers diffusion of oxygen to the surface, which was incorporated from the air atmosphere into the bulk upon repetitive fs-laser irradiation. This oxygen binds with silicon atoms within the amorphous surface layer, giving rise to SiOx, obtaining irregular decorations at the surface of the spike structures. These decorations can be removed by a buffered hydrofluoric acid solution, which etches the silicon oxide but not the crystalline silicon. Using this strategy we have obtained a high crystalline quality with: high absorption of around 95 % in the wavelength region from 200 to 1100 nm, minimized defect-related absorption from 1100 to 2500 nm; a crystalline lattice free of defects and oxygen; and a high aspect-ratio micro-spike morphology formed by c-Si free of surface SiOx nano-decorations that can be useful to fabricate optoelectronic devices.