Pasar al contenido principal

NANOFOTONICA CON MICROOPTICA: OPTICA RESONANTE PARA SISTEMAS MICROOPTICOS

PID2019-105918GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Optical Sensing Using Hybrid Multilayer Grating Metasurfaces with Customized Spectral Response

  • Hamdy Mohamed Elshorbagy, Mahmoud
  • Cuadrado Conde, Alexander
  • Alda Serrano, Javier
Customized metasurfaces allow for controlling optical responses in photonic and optoelectronic devices over a broad band. For sensing applications, the spectral response of an optical device can be narrowed to a few nanometers, which enhances its capabilities to detect environmental changes that shift the spectral transmission or reflection. These nanophotonic elements are key for the new generation of plasmonic optical sensors with custom responses and custom modes of operation. In our design, the metallic top electrode of a hydrogenated amorphous silicon thin-film solar cell is combined with a metasurface fabricated as a hybrid dielectric multilayer grating. This arrangement generates a plasmonic resonance on top of the active layer of the cell, which enhances the optoelectronic response of the system over a very narrow spectral band. Then, the solar cell becomes a sensor with a response that is highly dependent on the optical properties of the medium on top of it. The maximum sensitivity and figure of merit (FOM) are SB = 36,707 (mA/W)/RIU and ≈167 RIU−1, respectively, for the 560 nm wavelength using TE polarization. The optical response and the high sensing performance of this device make it suitable for detecting very tiny changes in gas media. This is of great importance for monitoring air quality and thecomposition of gases in closed atmospheres.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward white light emission from plasmonic-luminescent hybrid nanostructures

  • Gómez-Rodríguez, Pilar
  • Soria, Esther
  • Jin, Yu
  • Caño, Andrés
  • Llorente, Irene
  • Cuadrado, Alexander
  • Mariscal, A.
  • Petford-Long, Amanda K.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
13 pags., 6 figs., 2 tabs., We study the light emission of plasmonic-luminescent hybrid nanostructures consisting of Ag nanoparticles (NPs) embedded in europium oxide (EuOX). The Ag NPs present a bidimensional organization in the nanostructures and they optically behave as oblate spheroids. The photoluminescence (PL) spectral response of the nanostructures evolves from a narrow red emission characteristic of Eu3+ ions in absence of Ag NPs to a broad blue-green emission band associated with Eu2+ ions when the layer of Ag NPs is present. This behavior is not related to a change in the Eu2+/Eu3+ ratio, which is verified by compositional analysis. Instead, a detailed investigation of the PL emission of the nanostructures suggests that the coupling of the Ag NPs to the Eu2+ ions present in the EuOX layer, which manifests itself in an efficient sensitization of these ions, enhances their broad visible emission. In particular, the longitudinal mode of the Ag NPs surface plasmon is considered to be responsible for the efficient energy transfer for the non-normal incidence excitation PL configuration used. Finally, the use of a capping amorphous Al2O3 layer allows improving the robustness of hybrid nanostructures and further enhances their PL emission. These findings provide a new path to actively control the selective excitation of Eu2+ and Eu3+ ions via a controlled coupling with the surface plasmon resonance modes of the Ag NPs and points to these nanostructures as promising building blocks for the development of integrable white light sources., This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants RTI 2018-096498-B-I00 and PID2019-105918GB-I00, the CSIC (LINKA2044 I-Link+ and PIE-202050E195 projects) and the Autonomous Community of Madrid (UV4VIR.COV20-01244-CM project). The work of P. Gomez-Rodriguez was supported by the Autonomous Community of Madrid and the European Social Fund (Contract E-28-2019-0767805). A. K. Petford-Long and Yu Jin were supported by the National Science Foundation (Collaborative Grant #DMR 1600837), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward white light emission from plasmonic- luminescent hybrid nanostructures

  • Gómez-Rodríguez, Pilar
  • Soria, Esther
  • Jin, Yu
  • Caño, Andrés
  • Llorente, Irene
  • Cuadrado, Alexander
  • Mariscal, A.
  • Petford-Long, Amanda K.
  • Serna, Rosalía
  • Gonzalo de los Reyes, J.
13 pags., 6 figs., 2 tabs., We study the light emission of plasmonic- luminescent hybrid nanostructures consisting of Ag nanoparticles (NPs) embedded in europium oxide (EuOx). The Ag NPs present a bidimensional organization in the nanostructures and they optically behave as oblate spheroids. The photoluminescence (PL) spectral response of the nanostructures evolves from a narrow red emission characteristic of Eu3+ ions in absence of Ag NPs to a broad blue-green emission band associated with Eu2+ ions when the layer of Ag NPs is present. This behavior is not related to a change in the Eu2+/Eu3+ ratio, which is verified by compositional analysis. Instead, a detailed investigation of the PL emission of the nanostructures suggests that the coupling of the Ag NPs to the Eu2+ ions present in the EuOx layer, which manifests itself in an ef!cient sensitization of these ions, enhances their broad visible emission. In particular, the longitudinal mode of the Ag NPs surface plasmon is considered to be responsible for the ef!cient energy transfer for the non-normal incidence excitation PL con!guration used. Finally, the use of a capping amor- phous Al2O3 layer allows improving the robustness of hybrid nanostructures and further enhances their PL emission. These !ndings provide a new path to actively control the selective excitation of Eu2+ and Eu3+ ions via a controlled coupling with the surface plasmon resonance modes of the Ag NPs and points to these nanostructures as promising building blocks for the development of inte- grable white light sources., This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants RTI 2018-096498-B-I00 and PID2019-105918GB-I00, the CSIC (LINKA2044 I-Link+ and PIE-202050E195 projects) and the Autonomous Community of Madrid (UV4VIR.COV20-01244-CM project). The work of P. Gomez-Rodriguez was supported by the Autonomous Community of Madrid and the European Social Fund (Contract E-28-2019-0767805). A. K. Petford-Long and Yu Jin were supported by the National Science Foundation (Collaborative Grant #DMR 1600837).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and numerical analysis of metallic Ronchi diffraction gratings acting as reflective beam-splitter

  • Torcal-Milla, Francisco Jose
  • Sanchez-Brea, Luis Miguel
Objective In this work, a reflective beam-splitter based on a metallic Ronchi diffraction grating normally illuminated is designed and analysed. This kind of beam-splitter could have potential applications in photonics and optical technologies in which robustness is necessary since it may be manufactured over malleable metallic substrates. Methods The main idea under the design is as simple as obligating the zero-th diffraction order to be null. Firstly, scalar approach is performed, showing an approximation to the parameters of the grating necessary to cancel zero-th diffraction order. After that, a more rigorous approach such as Rigorous Coupled Waves Analysis (TE and TM polarization) is used to evaluate the proposed diffraction gratings as reflective beam-splitters. Results Beam-splitting is demonstrated for TE and TM polarization with slightly different dimensional parameters of the diffraction grating. Besides, we show how physical height of the grating grooves that allows cancelling zero-th diffraction order for a certain illumination wavelength depends on the metals used to manufacture the grating and its period. The dependence of the grooves height on the period is exponentially decreasing. To complete the analysis, we demonstrate how for a given grating period, the grooves height also depends on the illumination wavelength.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fourier series diffractive lens with extended depth of focus

  • Soria-Garcia, Angela
  • Sanchez-Brea, Luis Miguel
  • del Hoyo, Jesus
  • Torcal-Milla, Francisco Jose
  • Gomez-Pedrero, Jose Antonio
Angular diffractive lenses have been proven to achieve a narrow beam waist with a long depth of focus. We generalize these type of lenses by defining the angular distribution of the focal length as a Fourier series. The Fourier coefficients of the lens are optimized, using Particle Swarm Optimization algorithm, to minimize the beam width and increase its uniformity for a given depth of focus. In order to obtain a fast simulation during the optimization process, we used Chirp Z-transform algorithm. Finally, we performed an experimental verification of the results using a Spatial Light Modulator. The Fourier series diffractive lens presents a more uniform and narrower beam than previous angular lenses, in both simulations and experiments. These results may find applications in the design of contact and intraocular lenses with extended depth of focus, laser focusing and imaging systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Validity of Thin Element Approximation in diffractometry of opaque thick objects

  • Sanchez-Brea, Luis Miguel
  • Soria-Garcia, Angela
  • Andres-Porras, Joaquin
  • del Hoyo, Jesus
  • Torcal-Milla, Francisco Jose
  • Elshorbagy, Mahmoud Hamdy
  • Pastor-Villarrubia, Veronica
  • Alda, Javier
The Thin Element Approximation (TEA) is widely used in diffraction analyses since it can be applied in efficient plane-to-plane propagation algorithms. While refinements have been developed for dielectric objects to obtain more accurate results, TEA is assumed precise for opaque objects. However, through numerical simulations presented in this work, based on Wave Propagation Method, we analyze the tendency of TEA to overestimate the dimensions of opaque objects in diffractometry. This effect was acknowledged in the case of cylinders, and we obtain similar results for the case of rectangular thick strips. On the other hand, TEA demonstrates a high level of accuracy when applied to objects with thickness concentrated at the center and thin edges, such as the isosceles triangular obstacle. Finally, we analyze objects whose shape is defined using the superellipse function, which is chosen for its versatility in generating objects of equivalent width and maximum thickness but with different shapes just changing a single parameter. Our results highlight the importance of considering the object geometry when employing this approximation in diffraction studies of opaque three-dimensional objects
Docta Complutense
Publicación Artículo científico (JournalArticle)

Interferometric method for simultaneous characterization of retardance and fast axis of a retarder

  • Del Hoyo Muñoz, Jesús
  • Porras, Joaquin Andres
  • Soria García, Ángela
  • Sánchez Brea, Luis Miguel
  • Pastor Villarrubia, Veronica
  • Hamdy Mohamed Elshorbagy, Mahmoud
  • Alda Serrano, Javier
In this work, we propose a technique to simultaneously measure the absolute retardance and the fast axis azimuth of a retarder using a Michelson interferometer with polarization control. One of the mirrors is slightly tilted to obtain interference fringes with collimated beams. The sample to measure is rotated and the parameters are obtained from the fringes displacement. The technique does not require the use of additional previously characterized retarders in the measurement process, but only linear polarizers. The experimental results present errors of the order of 2◦ for the retardance and 1◦ for the azimuth of the fast axis.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Polarization conversion using customized subwavelength laser-induced periodic surface structures on stainless steel

  • Hamdy Mohamed Elshorbagy, Mahmoud
  • Sánchez Brea, Luis Miguel
  • Buencuerpo, Jerónimo
  • Del Hoyo Muñoz, Jesús
  • Soria García, Ángela
  • Pastor Villarrubia, Verónica
  • San-Blas, Alejandro
  • Rodriguez, Ainara
  • Olaizola, Santiago Miguel
  • Alda Serrano, Javier
Stainless steel is a basic raw material used in many industries. It can be customized by generating laser-induced periodic surface structure (LIPSS) as subwavelength gratings. Here, we present the capabilities of an LIPSS on stainless steel to modify the polarization state of the reflected radiation at the IR band. These structures have been modeled using the finite element method and fabricated by femtosecond laser processing. The Stokes parameters have been obtained experimentally and a model for the shape has been used to fit the simulated Stokes values to the experimental data. The birefringence of the LIPSS is analyzed to explain how they modify the polarization state of the incoming light. We find the geometry of the subwavelength grating that makes it work as an optical retarder that transforms a linearly polarized light into a circularly polarized wave. In addition, the geometrical parameters of the LIPSS are tuned to selectively absorb one of the components of the incoming light, becoming a linear axial polarizer. Appropriately selecting the geometrical parameters and orientation of the fabricated LIPSS makes it possible to obtain an arbitrary pure polarization state when illuminated by a pure linearly polarized state oriented at an azimuth of 45°. The overall reflectance of these transformations reaches values close to 60% with respect to the incident intensity, which is the same reflectivity obtained for non-nanostructured stainless steel flat surfaces.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Validity of thin element approximation in diffractometry of opaque thick objects

  • Sánchez Brea, Luis Miguel
  • Soria García, Angela
  • Andres Porras, Joaquín
  • Del Hoyo Muñoz, Jesús
  • Torcal Milla, Francisco José
  • Hamdy Mohamed Elshorbagy, Mahmoud
  • Pastor Villarrubia, Veronica
  • Alda Serrano, Javier
The Thin Element Approximation (TEA) is widely used in diffraction analyses since it can be applied in efficient plane-to-plane propagation algorithms. While refinements have been developed for dielectric objects to obtain more accurate results, TEA is assumed precise for opaque objects. However, through numerical simulations presented in this work, based on Wave Propagation Method, we analyze the tendency of TEA to overestimate the dimensions of opaque objects in diffractometry. This effect was acknowledged in the case of cylinders, and we obtain similar results for the case of rectangular thick strips. On the other hand, TEA demonstrates a high level of accuracy when applied to objects with thickness concentrated at the center and thin edges, such as the isosceles triangular obstacle. Finally, we analyze objects whose shape is defined using the superellipse function, which is chosen for its versatility in generating objects of equivalent width and maximum thickness but with different shapes just changing a single parameter. Our results highlight the importance of considering the object geometry when employing this approximation in diffraction studies of opaque three-dimensional objects.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Experimental validation of designs for permeable diffractive lenses based on photon sieves for the sensing of running fluids

  • Pastor Villarrubia, Verónica
  • Soria García, Ángela
  • Andres Porras, Joaquin
  • Del Hoyo Muñoz, Jesús
  • Elshorbagy, Mahmoud H.
  • Sánchez Brea, Luis Miguel
  • Alda Serrano, Javier
This study reports the experimental validation of several designs of photon sieves with focusing capabilities. These permeable optical elements were implemented with a spatial light modulator working in pure-amplitude mode. The focal region was scanned using a traveling stage, holding a camera. Using this experimental setup, we characterized the focal region of the photon sieves and determined some parameters of interest, such as the depth of focus and the transverse extent of the focal region. These parameters and their evolution were measured and analyzed to compare the optical performance of different designs. Moreover, the permeability of the mask was also evaluated and is included in the discussion. When the photon sieve is intended to be used as an optical element for the monitoring of running fluids, one of the designs studied, labeled the Ring-by-Ring method, behaves in a quite balanced manner and thus has become the preferred choice. Through simulations for a refractometric sensor, we obtained the Figure of Merit of the Ring-by-Ring mask, which reached a maximum value of 7860 RIU−1, which is competitive with plasmonic sensing devices
Docta Complutense
Publicación Artículo científico (JournalArticle)

Spectral and thermal management of hexagonal resonant structures for flexible opto-electronic transducers

  • Hamdy Mohamed Elshorbagy, Mahmoud
  • Torres Lechuga, Luis G.
  • González, Francisco J.
  • Alda Serrano, Javier
  • Cuadrado Conde, Alexander
Efficient on-chip optoelectronic devices in sensing and energy harvesting rely on the combination of subwavelength designs and multiphysical effects. In this contribution, we experimentally analyze and computationally model the optical performance of a hexagonal two-dimensional cluster placed over a silicon substrate and separated by a dielectric layer. Its reflectance has a dip in the long wavelength infrared band. This resonance is due to the generation of localized surface plasmons at the hexagonal surface. Our experimental results validate the multiphysics computational model which can be used to improve its performance as thermal detectors on flexible substrates. In this case, the model combines computational electromagnetism and heat transfer analysis to obtain the temperature distribution in the device. From this analysis, we have designed a thermal transducer based on a metasurface. It consists of a stacked arrangement made of a periodic hexagonal metallic array, a semiconductor ultra-thin layer, a metallic mirror, and a flexible substrate made of polyimide. The structure presented in this work behaves as a spectral selective surface with a resonant wavelength determined by the size of the hexagonal elements and the configuration of the multilayer. Our results show that this device has a time constant in the order of a few milliseconds (2.3 ms). This fast response can be useful in a wide variety of applications such as high speed thermal sensing and energy harvesting.