Pasar al contenido principal

ELEMENTOS OPTICOS DIFRACTIVOS VECTORIALES PARA CIENCIA Y TECNOLOGIA

PID2022-138071OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Experimental analysis of the spectral reflectivity of metallic blazed diffraction gratings in the THz range for space instrumentation

  • García Lozano, Gonzalo
  • Mercant, Guillermo
  • Fernández Rodríguez, Marianela
  • Torquemada, María Carmen
  • González, Luis Miguel
  • Belenguer Dávila, Tomás
  • Cuadrado Conde, Alexander
  • Sánchez Brea, Luis Miguel
  • Alda Serrano, Javier
  • Hamdy Mohamed Elshorbagy, Mahmoud
The core of spectrometers for deep space exploration in the far-infrared spectral range is a diffraction grating optimized for a defined range of wavelengths. This contribution presents an in- depth analysis of the fabrication, morphological characterization, and spectral efficiency verification of this type of gratings operating in the THz range. Two different manufacturing techniques were used: the first one was laser ablation and microstructuring with a five-axis femtosecond laser system, and the second one was a traditional micromachining technique using milling tools. The gratings have a blazed geometry with saw-tooth profiles that enhances the efficiency of the diffracted order of interest, m = 1, at the TM polarization mode, and within a spectral range between 70 and 114 μm. The morphological features of the fabricated gratings were measured by confocal microscopy and analyzed using topographic parameters. The measured averaged profiles were used to compute the diffraction efficiency of the fabricated gratings and to compare the actual manufactured profiles against the experimental results. Our measurement setup fixes the wavelength of the illuminating source to six values between 60 and 120 μm (2.5 and 4.7 THz). At each of these spectral lines, we have scanned the angle of incidence between 20◦ and 75◦ . This angular range includes the nominal value of the angle of incidence, θinc = 57◦ . The experimental values of efficiency can be easily compared with those resulting from computation, where the efficiency is calculated for each one of the available wavelengths as a function of the angle of incidence. This approach has allowed us to validate the design and conclude that gratings fabricated using femtosecond laser ablation perform better than those obtained through micromachining processes. In any case, both manufacturing techniques generate gratings above the validation threshold for diffraction efficiency, η > 0.65.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Validity of Thin Element Approximation in diffractometry of opaque thick objects

  • Sanchez-Brea, Luis Miguel
  • Soria-Garcia, Angela
  • Andres-Porras, Joaquin
  • del Hoyo, Jesus
  • Torcal-Milla, Francisco Jose
  • Elshorbagy, Mahmoud Hamdy
  • Pastor-Villarrubia, Veronica
  • Alda, Javier
The Thin Element Approximation (TEA) is widely used in diffraction analyses since it can be applied in efficient plane-to-plane propagation algorithms. While refinements have been developed for dielectric objects to obtain more accurate results, TEA is assumed precise for opaque objects. However, through numerical simulations presented in this work, based on Wave Propagation Method, we analyze the tendency of TEA to overestimate the dimensions of opaque objects in diffractometry. This effect was acknowledged in the case of cylinders, and we obtain similar results for the case of rectangular thick strips. On the other hand, TEA demonstrates a high level of accuracy when applied to objects with thickness concentrated at the center and thin edges, such as the isosceles triangular obstacle. Finally, we analyze objects whose shape is defined using the superellipse function, which is chosen for its versatility in generating objects of equivalent width and maximum thickness but with different shapes just changing a single parameter. Our results highlight the importance of considering the object geometry when employing this approximation in diffraction studies of opaque three-dimensional objects
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chessboard-based achromatic binary Zone Plate

  • Fernández-Nuñez, Sara
  • Gómez-Pedrero, José Antonio
  • Torcal-Milla, Francisco José
  • Sanchez-Brea, Luis Miguel
We numerically and experimentally demonstrate the performance of a new kind of diffractive binary zone plate for chromatic aberration compensation: the chessboard-based zone plate. The proposed achromatic zone plate consists of two spatially multiplexed zone plates following the geometry given by a chessboard and improved with morphological filters and combination under the Nyquist frequency, to mitigate aliasing effects. The obtained results are compared with those given by a random pixel-based multiplexed zone plate, reported in the literature, showing similar optical behaviour. However, the chessboard-based zone plate presents a smoother appearance without the high-frequency irregularities of the random-based designs that could be more resistant to manufacturing errors. The proposed achromatic zone plate could result of interest in fields such as solar concentration, lithography, imaging systems, visual optics, and so on.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Interferometric method for simultaneous characterization of retardance and fast axis of a retarder

  • Del Hoyo Muñoz, Jesús
  • Porras, Joaquin Andres
  • Soria García, Ángela
  • Sánchez Brea, Luis Miguel
  • Pastor Villarrubia, Veronica
  • Hamdy Mohamed Elshorbagy, Mahmoud
  • Alda Serrano, Javier
In this work, we propose a technique to simultaneously measure the absolute retardance and the fast axis azimuth of a retarder using a Michelson interferometer with polarization control. One of the mirrors is slightly tilted to obtain interference fringes with collimated beams. The sample to measure is rotated and the parameters are obtained from the fringes displacement. The technique does not require the use of additional previously characterized retarders in the measurement process, but only linear polarizers. The experimental results present errors of the order of 2◦ for the retardance and 1◦ for the azimuth of the fast axis.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Validity of thin element approximation in diffractometry of opaque thick objects

  • Sánchez Brea, Luis Miguel
  • Soria García, Angela
  • Andres Porras, Joaquín
  • Del Hoyo Muñoz, Jesús
  • Torcal Milla, Francisco José
  • Hamdy Mohamed Elshorbagy, Mahmoud
  • Pastor Villarrubia, Veronica
  • Alda Serrano, Javier
The Thin Element Approximation (TEA) is widely used in diffraction analyses since it can be applied in efficient plane-to-plane propagation algorithms. While refinements have been developed for dielectric objects to obtain more accurate results, TEA is assumed precise for opaque objects. However, through numerical simulations presented in this work, based on Wave Propagation Method, we analyze the tendency of TEA to overestimate the dimensions of opaque objects in diffractometry. This effect was acknowledged in the case of cylinders, and we obtain similar results for the case of rectangular thick strips. On the other hand, TEA demonstrates a high level of accuracy when applied to objects with thickness concentrated at the center and thin edges, such as the isosceles triangular obstacle. Finally, we analyze objects whose shape is defined using the superellipse function, which is chosen for its versatility in generating objects of equivalent width and maximum thickness but with different shapes just changing a single parameter. Our results highlight the importance of considering the object geometry when employing this approximation in diffraction studies of opaque three-dimensional objects.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Novel durable broadband absorber with hierarchical nano micro photonic structure

  • Elshorbagy, Mahmoud H.
  • Caria, Maria Gil de
  • Martínez Antón, Juan Carlos
  • Cuadrado Conde, Alexander
  • Sánchez Brea, Luis Miguel
  • Alda Serrano, Javier
This study presents an innovative fabrication method that integrates chemical bath etching and anodization to produce a hierarchical nano/micro-structured surface on aluminum substrates. The proposed methodology is simple and uses conventional equipment and chemical components, generating quasi-crystalline nanostructures over a large area of several cm . By successfully anodizing a porous aluminum surface, we combine the beneficial physical properties at both scales: the low density of the rigid porous aluminum structure and the low reflectance of the robust Anodized Aluminum Oxide (AAO) layer. This dual morphology significantly enhances the material’s optical and mechanical performance, resulting in a broadband, highly absorptive, and durable surface. The increase in hardness is linked to the generation of a porous layer through chemical etching, and the reduction in optical reflectivity in the visible and near infrared is mainly caused by the presence of nano-holes produce by anodization. The final sample demonstrates a remarkable improvement in hardness, with a twofold increase in the Vickers hardness number compared to conventional AAO layers, and a threefold increase compared to the porous aluminum layer alone. Additionally, the reflectivity of the fabricated surface is reduced by 25% relative to traditional AAO layers. These findings highlight the potential of this hybrid fabrication technique for applications requiring surfaces with superior light absorption, mechanical durability, and anti-reflective properties, such as in solar energy harvesting, optical devices, and protective coatings.
Docta Complutense
Publicación Artículo científico (JournalArticle)

High accuracy and precision measurement method of the extinction coefficient and retardance of non-perfect linear polarizers

  • Del Hoyo Muñoz, Jesús
  • Soria García, Ángela
  • Andres Porras, Joaquín
  • Alda Serrano, Javier
  • Sánchez Brea, Luis Miguel
Linear polarizers, even high quality ones, may present non-negligible extinction transmission and retardance. The value of the extinction transmission measured using the Malus law is unreliable in most of the cases. Both parameters can be determined using Mueller–Stokes polarimetry but the results are even less trustworthy. In this work we propose a new method for measuring the extinction coefficient and retardance of a polarizer with high accuracy and precision. It requires the use of an auxiliary polarizer and a waveplate, along with circularly polarized and linearly polarized light sources. This method has increased accuracy than previous methods based on Malus law or Mueller–Stokes polarimetry, and is insensitive to background noise fluctuations, increasing precision. We have numerically tested the reliability of the method when several experimental errors are introduced, showing that it is robust to them. Also, the method has been experimentally implemented to characterize commercial polarizers, and a synthetic linear polarizer with a controllable retardance produced by a liquid crystal. We show that our experimental method is more precise than Malus method and Mueller–Stokes polarimetry. The uncertainty in the extinction coefficient is reduced up to 7 times compared with Malus law and two orders of magnitude respect to Mueller–Stokes polarimetry methods. The uncertainty in the extinction ratio decreases up to two orders of magnitude respect to Malus law method and 7 times respect to Mueller–Stokes polarimetry. The uncertainty in the retardance is reduced up to 2 orders of magnitude respect to Mueller–Stokes polarimetry.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Experimental validation of designs for permeable diffractive lenses based on photon sieves for the sensing of running fluids

  • Pastor Villarrubia, Verónica
  • Soria García, Ángela
  • Andres Porras, Joaquin
  • Del Hoyo Muñoz, Jesús
  • Elshorbagy, Mahmoud H.
  • Sánchez Brea, Luis Miguel
  • Alda Serrano, Javier
This study reports the experimental validation of several designs of photon sieves with focusing capabilities. These permeable optical elements were implemented with a spatial light modulator working in pure-amplitude mode. The focal region was scanned using a traveling stage, holding a camera. Using this experimental setup, we characterized the focal region of the photon sieves and determined some parameters of interest, such as the depth of focus and the transverse extent of the focal region. These parameters and their evolution were measured and analyzed to compare the optical performance of different designs. Moreover, the permeability of the mask was also evaluated and is included in the discussion. When the photon sieve is intended to be used as an optical element for the monitoring of running fluids, one of the designs studied, labeled the Ring-by-Ring method, behaves in a quite balanced manner and thus has become the preferred choice. Through simulations for a refractometric sensor, we obtained the Figure of Merit of the Ring-by-Ring mask, which reached a maximum value of 7860 RIU−1, which is competitive with plasmonic sensing devices