Pasar al contenido principal

CONTROL MAGNETO-MECANICO DE LA MAGNETIZACION EN SISTEMAS NANOMETRICOS MEDIANTE ONDAS ACUSTICAS

MAT2015-69144-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE BARCELONA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thickness and temperature dependence of the magnetodynamic damping of pulsed laser deposited La0.7Sr0.3MnO3 on (111)-oriented SrTiO3

  • Flovik, Vegard
  • Macià Bros, Ferran
  • Lendínez, Sergi
  • Hernández, Joan Manel
  • Hallsteinsen, Ingrid
  • Tybell, Thomas
  • Wahlström, Erik
We have investigated the magnetodynamic properties of La0.7Sr0.3MnO3 (LSMO) films of thickness 10, 15 and 30 nm grown on (111)-oriented SrTiO3 (STO) substrates by pulsed laser deposition. Ferromagnetic resonance (FMR) experiments were performed in the temperature range 100–300 K, and the magnetodynamic damping parameter α was extracted as a function of both film thickness and temperature. We found that the damping is lowest for the intermediate film thickness of 15 nm with α≈2·10−3, where α is relatively constant as a function of temperature well below the Curie temperature of the respective films., This work was supported by the Norwegian Research Council (NFR), project number 216700. V.F acknowledge partial funding obtained from the Norwegian PhD Network on Nanotechnology for Microsystems, which is sponsored by the Research Council of Norway, Division for Science, under contract no. 221860/F40. F.M. acknowledges financial support from RYC-2014-16515 and from the MINECO through the Severo Ochoa Program (SEV- 2015-0496). J.M and F.M aslo acknowledge funding from MINECO through MAT2015-69144., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation and Imaging of Magnetoacoustic Waves over Millimeter Distances

  • Casals, Blai
  • Statuto, Nahuel
  • Foerster, Michael
  • Hernández Mínguez, Alberto
  • Cichelero, Rafael
  • Manshausen, Peter
  • Mandziak, Anna
  • Aballe, Lucía
  • Hernández, Joan Manel
  • Macià, Ferran
Using hybrid piezoelectric-magnetic systems we have generated large amplitude magnetization waves mediated by magnetoelasticity with up to 25 degrees variation in the magnetization orientation. We present direct imaging and quantification of both standing and propagating acoustomagnetic waves with different wavelengths, over large distances up to several millimeters in a nickel thin film., The authors acknowledge Jordi Prat of ALBA for his help during experiments. F. M. acknowledges support from the MINECO through Grant No. RYC-2014-16515. F. M., B. C., and R. C. acknowledge support from MINECO through Grants No. SEV-2015-0496 and No. MAT2017- 85232-R. F. M., J. M. H., and N. S. acknowledge funding from MINECO through Grant No. MAT2015-69144-P. We thank Werner Seidel and Sander Rauwerdink from PDI for assistance in the preparation of acoustic delay lines on LiNbO3. L. A. and M. F. acknowledge support from MINECO through RTI2018-095303-B-C53. This project was partially supported by the ALBA in-house research program through Projects No. ALBA-IH2015PEEM and ALBAIH2017PEEM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Promotion of Catalytic Reactions by Surface Acoustic Waves

  • Boehn, Bernhard von
  • Foerster, Michael
  • Boehn, Moritz von
  • Prat, Jordi
  • Macià, Ferran
  • Casals, Blai
  • Khaliq, Muhammad W.
  • Hernández Mínguez, Alberto
  • Aballe, Lucía
  • Imbihl, Ronald
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis, sensor and nanotechnology. SAWs were shown to cause a strong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However, the promotion mechanism has not been unambiguously identified. Using stroboscopic X‐ray photoelectron spectro‐microscopy, we were able to evidence a sub‐nanosecond work function change during propagation of 500 MHz SAWs on a 9 nm thick platinum film. We quantify the work function change to 455 μeV. Such a small variation rules out that electronic effects due to elastic deformation (strain) play a major role in the SAW‐induced promotion of catalysis. In a second set of experiments, SAW‐induced intermixing of a five monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be a major cause for catalytic promotion., The authors thank Werner Seidel for technical support in the fabrication of the IDTs, Rolf J. Haug, Hannover, for help in preparation of the samples, and Leo Zhigilei for carefully reading the manuscript. The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. LA and MF acknowledge support from Spanish MINECO through Grant No. RTI2018‐095303‐B‐C53. FM and BC acknowledges support from Spanish MINECO through Grants No. RYC‐2014‐16515, No. MAT2015‐69144‐P, No. SEV‐2015‐0496 and No. MAT2017‐85232‐R. Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic droplet solitons

  • Macià, Ferran
  • Kent, Andrew D.
Magnetic droplet solitons are dynamical magnetic textures that form due to an attractive interaction between spin waves in thin films with perpendicular magnetic anisotropy. Spin currents and the spin torques associated with these currents enable their formation as they provide a means to excite non-equilibrium spin-wave populations and compensate their decay. Recent years have seen rapid advances in experiments that realize and study magnetic droplets. Important advances include the first direct x-ray images of droplets, determination of their threshold and sustaining currents, measurement of their generation and annihilation time, and evidence for drift instabilities, which can limit their lifetime. This perspective discusses these studies and contrasts these solitons to other types of spin-current excitations, such as spin-wave bullets, and static magnetic textures, including magnetic vortices and skyrmions. Magnetic droplet solitons can also serve as current controlled microwave frequency oscillators with potential applications in neuromorphic chips as nonlinear oscillators with memory., We thank our many collaborators over the years that have contributed to the experiments and ideas that have been discussed in this review: J. Albert, S. Bonetti, R. Kukreja, J. Hang, C. Hahn, J. M. Hernàndez, S. Lendínez, H. Ohldag, and N. Statuto. We thank Dan Stein for discussions and comments on this manuscript. Research at NYU related to neuromorphic computing was supported by Quantum Materials for Energy Efficient Neuromorphic Computing (Q-MEEN-C), an Energy Frontier Research Center funded by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES), under No. Award DE-SC0019273. We also acknowledge fruitful discussions with Julie Grollier, Danijela Markovic, and Mark Stiles, which were initiated by Q-MEEN-C. F.M. acknowledges support from the Spanish Government through Grant Nos. RYC-2014-16515, MAT2015-69144-P, SEV-2015-0496, and MAT2017-85232-R. A.D.K. received support to conduct the x-ray microscopy and droplet lifetime experiments from the National Science Foundation under Grant No. DMR-1610416., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the promotion of catalytic reactions by surface acoustic waves

  • von Boehn, Bernhard|||0000-0003-3722-5767
  • Foerster, Michael|||0000-0002-4147-6668
  • von Boehn, Moritz
  • Prat Albert, Jordi|||0000-0002-9708-4831
  • Macià, Ferran|||0000-0001-5972-4810
  • Casals, Blai|||0000-0002-2941-1861
  • Khaliq, Muhammad Waqas|||0000-0002-9696-3498
  • Hernández-Mínguez, Alberto
  • Aballe, Lucía|||0000-0003-1810-8768
  • Imbihl, Ronald|||0000-0002-5155-7250
Surface acoustic waves (SAW) allow to manipulate surfaces with potential applications in catalysis, sensor and nanotechnology. SAWs were shown to cause a strong increase in catalytic activity and selectivity in many oxidation and decomposition reactions on metallic and oxidic catalysts. However, the promotion mechanism has not been unambiguously identified. Using stroboscopic X-ray photoelectron spectro-microscopy, we were able to evidence a sub-nanosecond work function change during propagation of 500 MHz SAWs on a 9 nm thick platinum film. We quantify the work function change to 455 μeV. Such a small variation rules out that electronic effects due to elastic deformation (strain) play a major role in the SAW-induced promotion of catalysis. In a second set of experiments, SAW-induced intermixing of a five monolayers thick Rh film on top of polycrystalline platinum was demonstrated to be due to enhanced thermal diffusion caused by an increase of the surface temperature by about 75 K when SAWs were excited. Reversible surface structural changes are suggested to be a major cause for catalytic promotion. Surface acoustic waves (SAWs) are dynamic lattice distortions, which can be excited on piezoelectric materials. For many years a promotion of the catalytic activity and selectivity by SAWs has been known, but no mechanistic understanding has been established yet. We quantify the effect that SAWs have on the electronic and geometric structure of a model catalyst, providing a basis for discussing the promotion mechanism of SAWs in catalytic surface reactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct imaging of delayed magneto-dynamic modes induced by surface acoustic waves

  • Foerster, Michael|||0000-0002-4147-6668
  • Macià, Ferran|||0000-0001-5972-4810
  • Statuto, Nahuel|||0000-0002-0062-760X
  • Finizio, Simone
  • Hernández-Mínguez, Alberto
  • Lendínez, Sergi
  • Santos, Paulo V.
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Hernàndez, Joan Manel
  • Kläui, Mathias|||0000-0002-4848-2569
  • Aballe, Lucía|||0000-0003-1810-8768
The magnetoelastic effect-the change of magnetic properties caused by the elastic deformation of a magnetic material-has been proposed as an alternative approach to magnetic fields for the low-power control of magnetization states of nanoelements since it avoids charge currents, which entail ohmic losses. Here, we have studied the effect of dynamic strain accompanying a surface acoustic wave on magnetic nanostructures in thermal equilibrium. We have developed an experimental technique based on stroboscopic X-ray microscopy that provides a pathway to the quantitative study of strain waves and magnetization at the nanoscale. We have simultaneously imaged the evolution of both strain and magnetization dynamics of nanostructures at the picosecond time scale and found that magnetization modes have a delayed response to the strain modes, adjustable by the magnetic domain configuration. Our results provide fundamental insight into magnetoelastic coupling in nanostructures and have implications for the design of strain-controlled magnetostrictive nano-devices.