Pasar al contenido principal

Materiales ferroeléctricos y antiferromagnéticos para la electrónica

RYC-2017-22531

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi
  • Quintana, Alberto
  • Martí, Xavier
  • Sánchez Barrera, Florencio
  • Foerster, Michael
  • Aballe, Lucía
  • Sort, Jordi
  • Fontcuberta, Josep
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions., Financial support by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R, MAT2015-64110-C2-2-R and MAT2017-86357-C3-1-R, and associated FEDER], the Generalitat de Catalunya (2017-SGR-1377, 2017-SGR-292), and the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement nº 648454) is acknowledged. We also acknowledge support from EU ERC Advanced Grant No. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2011026, from the Grant Agency of the Czech Republic Grant no. 14-37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV- 2015-0496). I.F. acknowledges Ramon y Cajal contract RYC-2017-22531., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band gap tuning of solution-processed ferroelectric perovskite BiFe1-xCoxO3 thin films

  • Machado, Pamela
  • Scigaj, Mateusz
  • Gázquez, Jaume
  • Rueda, Estel
  • Sánchez-Díaz, A.
  • Fina, Ignasi
  • Gibert Roca, Martí
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Campoy Quiles, Mariano
  • Coll, Mariona
Ferroelectric perovskite oxides are emerging as a promising photoactive layer for photovoltaic applications because of their very high stability and their alternative ferroelectricity-related mechanism for solar energy conversion that could lead to extraordinarily high efficiencies. One of the biggest challenges so far is to reduce their band gap toward the visible region while simultaneously retaining ferroelectricity. To address these two issues, herein an elemental composition engineering of BiFeO3 is performed by substituting Fe by Co cations, as a means to tune the characteristics of the transition metal–oxygen bond. We demonstrate by solution processing the formation of epitaxial, pure phase, and stable BiFe1–xCoxO3 thin films for x ≤ 0.3 and film thickness up to 100 nm. Importantly, the band gap can be tuned from 2.7 to 2.3 eV upon cobalt substitution while simultaneously enhancing ferroelectricity. As a proof of concept, nonoptimized vertical devices have been fabricated and, reassuringly, the electrical photoresponse in the visible region of the Co-substituted phase is improved with respect to the unsubstituted oxide, This research was supported by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and FIP-NANOSOLE-2016, MAT2017-83169-R, MAT2014-51778-C2-1-R, MAT2015-70850-P, MAT2017-85232-R (AEI/FEDER, EU)), the Generalitat de Catalunya (2017-SGR-1519, 2017 SGR-1377), the European Research Council-ERC (FOREMAT under grant agreement no. 648901), and “L’Oreal UNESCO For Women in Science”. M.C., J.G., and I.F. acknowledge RyC contracts (2013-12448, 2012-11709, and RYC-2017-22531). I.F. is grateful to MINECO for MAT2015-73839-JIN project. The HRTEM microscopy work was conducted at the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory, which is a DOE Office of Science User Facility.We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael
  • Menéndez, Enric
  • Coy, Emerson
  • Quintana, Alberto
  • Gómez Olivella, Carles
  • Esqué de los Ojos, Daniel
  • Vallcorba, Oriol
  • Frontera, Carlos
  • Aballe, Lucía
  • Nogués, Josep
  • Sort, Jordi
  • Fina, Ignasi
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (DT* B 20 8C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of predefined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices., Dr Patxi Lopez-Barbera is acknowledged for his assistance with the MOKE experiments. Vicente Garcia-Juez from Real Casa de la Moneda – Fabrica Nacional de Moneda y Timbre is acknowledged for his scientific advice. Dr Florencio Sa´nchez is acknowledged for the growth of the samples. Dr Bernat Bozzo is acknowledged for the electric transport characterization. ALBA synchrotron is acknowledged for the provision of beamtime at the MSPD (proposal number 2017092412) and CIRCE (proposal numbers 2017092462 and 2018022818) beamlines. Financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and SEV-2017-0706) and the MAT2017-85232-R, RTI2018-095303-B-C53. MAT2014-56063-C2-1-R, MAT2017-86357-C3-1-R (and associated FEDER) and MAT2015-73839-JIN projects, the Generalitat de Catalunya (2014 SGR 734 and 2017 SGR 292), AGAUR (2018 LLAV 00032 and 2019 LLAV 00050) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 665919 is acknowledged. This work was supported by the European Research Council under the SPIN-PORICS 2014-Consolidator Grant, Agreement No. 648454 and the MAGICSWITCH 2019-Proof of Concept Grant, Agreement No. 875018. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. I. F. acknowledges his RyC contract RYC-2017-22531. E. C. acknowledges the partial financial support from the National Science Centre of Poland (NCN) by the PRELUDIUM project UMO-2015/17/N/ST5/01988 and the SONATA Project No. UMO-2016/23/D/ST3/02121., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Disentangling Highly Asymmetric Magnetoelectric Effects in Engineered Multiferroic Heterostructures

  • Menéndez, Enric|||0000-0003-3809-2863
  • Sireus, Verònica
  • Quintana, Alberto|||0000-0002-9813-735X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Casals, Blai|||0000-0002-2941-1861
  • Cichelero, Rafael
  • Kataja, Mikko
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Catalan, Gustau|||0000-0003-0214-4828
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
One of the main strategies to control magnetism by voltage is the use of magnetostrictive-piezoelectric hybrid materials, such as ferromagnetic-ferroelectric heterostructures. When such heterostructures are subjected to an electric field, piezostrain-mediated effects, electronic charging, and voltage-driven oxygen migration (magnetoionics) may simultaneously occur, making the interpretation of the magnetoelectric effects not straightforward and often leading to misconceptions. Typically, the strain-mediated magnetoelectric response is symmetric with respect to the sign of the applied voltage because the induced strain (and variations in the magnetization) depends on the square of the ferroelectric polarization. Conversely, asymmetric responses can be obtained from electronic charging and voltage-driven oxygen migration. By engineering a ferromagnetic-ferroelectric hybrid consisting of a magnetically soft 50-nm thick Fe75Al25 (at. %) thin film on top of a (110)-oriented Pb(Mg1/3Nb2/3)O3-32PbTiO3 ferroelectric crystal, a highly asymmetric magnetoelectric response is obtained and the aforementioned magnetoelectric effects can be disentangled. Specifically, the large thickness of the Fe75Al25 layer allows dismissing any possible charge accumulation effect, whereas no evidence of magnetoionics is observed experimentally, as expected from the high resistance to oxidation of Fe75Al25, leaving strain as the only mechanism to modulate the asymmetric magnetoelectric response. The origin of this asymmetric strain-induced magnetoelectric effect arises from the asymmetry of the polarization reversal in the particular crystallographic orientation of the ferroelectric substrate. These results are important to optimize the performance of artificial multiferroic heterostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Local manipulation of metamagnetism by strain nanopatterning

  • Foerster, Michael|||0000-0002-4147-6668
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coy, Emerson|||0000-0002-4149-9720
  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez-Olivella, Carles|||0000-0002-1656-2951
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Frontera, Carlos|||0000-0002-0091-4756
  • Aballe, Lucía|||0000-0003-1810-8768
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Fina, Ignasi|||0000-0003-4182-6194
Among metamagnetic materials, FeRh alloys are technologically appealing due to their uncommon antiferromagnetic-to-ferromagnetic metamagnetic transition which occurs at a temperature T* just above room temperature. Here, a controlled increase of T* (ΔT* ∼ 20 °C) is induced in pre-selected regions of FeRh films via mechanical strain nanopatterning. Compressive stresses generated at the vicinity of pre-defined nanoindentation imprints cause a local reduction of the FeRh crystallographic unit cell parameter, which leads to an increase of T* in these confined micro-/nanometric areas. This enhances the stability of the antiferromagnetic phase in these localized regions. Remarkably, generation of periodic arrays of nanopatterned features also allows modifying the overall magnetic and electric transport properties across large areas of the FeRh films. This approach is highly appealing for the design of new memory architectures or other AFM-spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reversible and magnetically unassisted voltage-driven switching of magnetization in FeRh/PMN-PT

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Martí, Xavier
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Sort, Jordi|||0000-0003-1213-3639
  • Fontcuberta, Josep|||0000-0002-7955-2320
Reversible control of magnetization by electric fields without assistance from a subsidiary magnetic field or electric current could help reduce the power consumption in spintronic devices. When increasing temperature above room temperature, FeRh displays an uncommon antiferromagnetic to ferromagnetic phase transition linked to a unit cell volume expansion. Thus, using the strain exerted by an adjacent piezoelectric layer, the relative amount of antiferromagnetic and ferromagnetic regions can be tuned by an electric field applied to the piezoelectric material. Indeed, large variations in the saturation magnetization have been observed when straining FeRh films grown on suitable piezoelectric substrates. In view of its applications, the variations in the remanent magnetization rather than those of the saturation magnetization are the most relevant. Here, we show that in the absence of any bias external magnetic field, permanent and reversible magnetization changes as high as 34% can be induced by an electric field, which remain after this has been zeroed. Bulk and local magnetoelectric characterization reveals that the fundamental reason for the large magnetoelectric response observed at remanence is the expansion (rather than the nucleation) of ferromagnetic nanoregions.