Pasar al contenido principal

NUEVAS FUNCIONALIDADES DIRIGIDAS POR INTERACCIONES ESPIN-ORBITA: TEXTURAS DE ESPINES QUIRALES RAPIDAS Y EFICIENTES

RTI2018-097895-B-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION IMDEA NANOCIENCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large perpendicular magnetic anisotropy in nanometer-thick epitaxial graphene/Co/heavy metal heterostructures for spin–orbitronics devices

  • Blanco-Rey, María
  • Perna, Paolo
  • Gudín, Adrian
  • Díez, Jose Manuel
  • Anadón, Alberto
  • Olleros-Rodríguez, Pablo
  • Melo Costa, Leticia de
  • Valvidares, Manuel
  • Gargiani, Pierluigi
  • Guedeja-Marron, Alejandra
  • Cabero, Mariona
  • Varela, María
  • García-Fernández, Carlos
  • Otrokov, Mikhail M.
  • Camarero, Julio
  • Miranda, Rodolfo
  • Arnau, Andrés
  • Cerdá, Jorge I.
Nanometer-thick epitaxial Co films intercalated between graphene (Gr) and a heavy metal (HM) substrate are promising systems for the development of spin–orbitronic devices due to their large perpendicular magnetic anisotropy (PMA). A combination of theoretical modeling and experiments reveals the origin of the PMA and explains its behavior as a function of the Co thickness. High quality epitaxial Gr/Con/HM(111) (HM = Pt,Ir) heterostructures are grown by intercalation below graphene, which acts as a surfactant that kinetically stabilizes the pseudomorphic growth of highly perfect Co face-centered tetragonal (fct) films, with a reduced number of stacking faults as the only structural defect observable by high-resolution scanning transmission electron microscopy (STEM). Magneto-optic Kerr effect (MOKE) measurements show that such heterostructures present PMA up to large Co critical thicknesses of about 4 nm (20 ML) and 2 nm (10 ML) for Pt and Ir substrates, respectively. X-ray magnetic circular dichroism (XMCD) measurements show an inverse power law of the anisotropy of the orbital moment with Co thickness, reflecting its interfacial nature, that changes sign at about the same critical values. First principles calculations show that, regardless of the presence of graphene, ideal Co fct films on HM buffers do not sustain PMAs beyond around 6 mLs due to the in-plane contribution of the inner bulk-like Co layers. The large experimental critical thicknesses sustaining PMA can only be retrieved by the inclusion of structural defects that promote a local hcp stacking such as twin boundaries or stacking faults. Remarkably, a layer resolved analysis of the orbital momentum anisotropy reproduces its interfacial nature, and reveals that the Gr/Co interface contribution is comparable to that of the Co/Pt(Ir)., Financial support from MINECO (Grant Nos. RTI2018-097895-B-C41, RTI2018-097895-B-C42 and RTI2018-097895-B-C43 (FUN-SOC), PID2019-103910GB-I00, FIS2016-78591-C3-1-R and FIS2016-78591-C3-2-R (SKYTRON), PGC2018-098613-B-C21 (SpOrQuMat), PCI2019-111908-2 and PCI2019-111867-2 (FLAGERA 3 grant SOgraphMEM)], from Regional Government of Madrid (grant number P2018/NMT-4321 (NANOMAGCOST-CM)) and from Gobierno Vasco-UPV/EHU (grant numbers GIU18/138 and IT-1246-19). We acknowledge experiments at ALBA BL29 via proposal no. 2019023333. IMDEA-Nanociencia acknowledges support from the “Severo Ochoa” Program for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Magnetic Anisotropy of Lanthanides on a Metal Substrate by Metal–Organic Coordination

  • Parreiras, S. O.
  • Moreno, Daniel
  • Cirera, Borja
  • Valbuena, Miguel A.
  • Urgel, José I.
  • Paradinas, Markos
  • Ajejas, Fernando
  • Niño, Miguel Ángel
  • Gallego, José M.
  • Valvidares, Manuel
  • Gargiani, Pierluigi
  • Kuch, Wolfgang
  • Martínez, José I.
  • Mugarza, Aitor
  • Camarero, Julio
  • Miranda, Rodolfo
  • Perna, Paolo
  • Écija, David
Taming the magnetic anisotropy of lanthanides through coordination environments is crucial to take advantage of the lanthanides properties in thermally robust nanomaterials. In this work, the electronic and magnetic properties of Dy-carboxylate metal–organic networks on Cu(111) based on an eightfold coordination between Dy and ditopic linkers are inspected. This surface science study based on scanning probe microscopy and X-ray magnetic circular dichroism, complemented with density functional theory and multiplet calculations, reveals that the magnetic anisotropy landscape of the system is complex. Surface-supported metal–organic coordination is able to induce a change in the orientation of the easy magnetization axis of the Dy coordinative centers as compared to isolated Dy atoms and Dy clusters, and significantly increases the magnetic anisotropy. Surprisingly, Dy atoms coordinated in the metallosupramolecular networks display a nearly in-plane easy magnetization axis despite the out-of-plane symmetry axis of the coordinative molecular lattice. Multiplet calculations highlight the decisive role of the metal–organic coordination, revealing that the tilted orientation is the result of a very delicate balance between the interaction of Dy with O atoms and the precise geometry of the crystal field. This study opens new avenues to tailor the magnetic anisotropy and magnetic moments of lanthanide elements on surfaces., The ALBA synchrotron is acknowledged for providing beam time at BOREAS beamline (proposal number 2015091454). This project has received funding from the European Research Council (ERC, grant 766555) and Marie Sklodowska-Curie Actions (MSCA, project 894924) under the European Union's Horizon 2020 research and innovation programme. This work has been financed by the Spanish Ministerio de Economía, Industria y Competitividad (projects FIS2016-78591-C3-1-R, RTI2018-097895-B-C42, MAT2016-78293-C6-2-R, MAT2017-85089-C2-1-R, and PID2019-107338RB-C65); the Comunidad de Madrid (Projects S2013/MIT-2850, P2018/NMT4321, and S2018/NMT-4367); the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI); and “Severo Ochoa” Programme for Centres of Excellence in R&D (grants SEV-2016-0686, and SEV-2017-0706).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct X-Ray Detection of the Spin Hall Effect in CuBi

  • Ruiz-Gómez, Sandra
  • Guerrero, Rubén
  • Khaliq, Muhammad W.
  • Fernández-González, Claudia
  • Prat, Jordi
  • Valera, Andrés
  • Finizio, Simone
  • Perna, Paolo
  • Camarero, Julio
  • Pérez, Lucas
  • Aballe, Lucía
  • Foerster, Michael
13 pags., 12 figs., 8 apps. -- Subject Areas: Condensed Matter Physics, Spintronics, The spin Hall effect and the inverse spin Hall effect are important spin-charge conversion mechanisms. The direct spin Hall effect induces a surface spin accumulation from a transverse charge current due to spin-orbit coupling even in nonmagnetic conductors. However, most detection schemes involve additional interfaces, leading to large scattering in reported data. Here we perform interface-free x-ray spectroscopy measurements at the Cu L3,2 absorption edges of highly Bi-doped Cu (Cu95Bi5). The detected x-ray magnetic circular dichroism signal corresponds to an induced magnetic moment of (2.2±0.5)×10-12 μB A-1 cm2 per Cu atom averaged over the probing depth, which is of the same order of magnitude as found for Pt measured by magneto-optics. The results highlight the importance of interface-free measurements to assess material parameters and the potential of CuBi for spin-charge conversion applications., This work has been partially funded by MCIN/AEI/10.13039/501100011033 through Projects No. FIS2016-78591-C3-1-R, No. MAT2017-87072-C4-2-P, No. RTI2018-097895-BC42, No. RTI2018-095303-B-C53, and No. PID2020–117024GB-C43 and by the Comunidad de Madrid through Project No. NANOMAGCOST-CM P2018/NMT-4321. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (Grants No. SEV-2016-0686 and No. CEX2020-001039-S). The work has been supported by the ALBA inhouse research program. We thank the Spanish National Center of Electron Microscopy for Scanning Electron Microscopy measurements. M. W. K. acknowledges funding from Horizon 2020 Marie Skłodowska-Curie COFUND DOC-FAM, with Grant agreement No. 754397., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Soft magnetism in single phase Fe3Si thin films deposited on SrTiO3(001) by pulsed laser deposition

  • Arnay, Icíar
  • Serrano Rubio, Aída
  • Braza, Verónica
  • Cid, Rosalía
  • Sánchez, Ana M.
  • López-Sánchez, Jesús
  • Castro, Germán R.
  • Rubio-Zuazo, J.
[EN] The development of devices relying on spin phenomena requires of an ideal spin polarized electron source. This can be achieved by taking advantage of half-metallic full Heusler alloy thin films. However, their implementation requires a controlled growth of stoichiometric films with large activation volumes. In this work, we report on the growth of epitaxial Fe3Si ultra-thin films by pulsed laser deposition on SrTiO3(001) substrates, analyzing the effect of deposition temperature in the structural, morphological and magnetic properties of the deposited films. We conclude that optimal compromise between phase purity and interface quality is obtained at 200 ºC, obtaining the best magnetic response under this condition., The authors are grateful to the BM25-SpLine Staff for their valuable help and for the financial support from the Spanish MCIN and Consejo Superior de Investigaciones Científicas [Grant No. 2010–6-OE-013 and 2021 60 E 030]. IA acknowledges support by the Community of Madrid (CM) through Project P2018/NMT4321 (NANOMAGCOST), by MINECO through Project RTI2018–097895-B-C42 (FUN-SOC), PCI2019–111867-2 (FLAG-ERA JTC 2019, SOgraphMEM), and by the “Severo Ochoa” Programme for Centres of Excellence in RD, MINECO grant SEV-2016–0686. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (No. 2017-t2/IND5395)., Supplementary material, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin-orbit torque from the introduction of Cu interlayers in Pt/Cu/Co/Pt nanolayered structures for spintronic devices

  • Anadon, A.
  • Guerrero, R.
  • Jover-Galtier, J.A.
  • Gudín, A.
  • Díez Toledano, J.M.
  • Olleros-Rodríguez, P.
  • Miranda, R.
  • Camarero, J.
  • Perna, P.
Spin currents can modify the magnetic state of ferromagnetic ultrathin films through spin-orbit torque. They may be generated by means of spin-orbit interactions by either bulk or interfacial phenomena. Electrical transport measurements reveal a 6-fold increase of the spin-orbit torque accompanied by a drastic reduction of the spin Hall magnetoresistance upon the introduction of an ultrathin Cu interlayer in a Pt/Cu/Co/Pt structure with perpendicular magnetic anisotropy. We analyze the dependence of the spin Hall magnetoresistance with the thickness of the interlayer, ranging from 0.5 to 15 nm, in the frame of a drift diffusion model that provides information on the expected spin currents and spin accumulations in the system. The results demonstrate that the major responsibility of both effects is spin memory loss at the interface. The enhancement of the spin-orbit torque when introducing an interlayer opens the possibility to design more efficient spintronic devices based on materials that are cheap and abundant such as copper. More specifically, spin-orbit torque magnetic random access memories and spin logic devices could benefit from the spin-orbit torque enhancement and cheaper material usage presented in this study.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Engineering the spin conversion in graphene monolayer epitaxial structures

  • Anadón, A.
  • Gudín, A.
  • Guerrero, R.
  • Arnay, I.
  • Guedeja-Marron, A.
  • Jiménez-Cavero, P.
  • Díez Toledano, J.M.
  • Ajejas, F.
  • Varela, M.
  • Petit-Watelot, S.
  • Lucas, I.
  • Morellón, L.
  • Algarabel, P.A.
  • Ibarra, M.R.
  • Miranda, R.
  • Camarero, J.
  • Rojas-Sánchez, J.C.
  • Perna, P.
Spin Hall and Rashba-Edelstein effects, which are spin-to-charge conversion phenomena due to spin-orbit coupling (SOC), are attracting increasing interest as pathways to manage rapidly and at low consumption cost the storage and processing of a large amount of data in spintronic devices as well as more efficient energy harvesting by spin-caloritronics devices. Materials with large SOC, such as heavy metals (HMs), are traditionally employed to get large spin-to-charge conversion. More recently, the use of graphene (gr) in proximity with large SOC layers has been proposed as an efficient and tunable spin transport channel. Here, we explore the role of a graphene monolayer between Co and a HM and its interfacial spin transport properties by means of thermo-spin measurements. The gr/HM (Pt and Ta) stacks have been prepared on epitaxial Ir(111)/Co(111) structures grown on sapphire crystals, in which the spin detector (i.e., top HM) and the spin injector (i.e., Co) are all grown in situ under controlled conditions and present clean and sharp interfaces. We find that a gr monolayer retains the spin current injected into the HM from the bottom Co layer. This has been observed by detecting a net reduction in the sum of the spin Seebeck and interfacial contributions due to the presence of gr and independent from the spin Hall angle sign of the HM used.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning the magnetic anisotropy of lanthanides on a metal substrate by metal-organic coordination

  • Parreiras, Sofia de Oliveira|||0000-0001-9009-1994
  • Moreno Cerrada, Daniel|||0000-0002-4499-2561
  • Cirera, Borja
  • Valbuena, Miguel Ángel|||0000-0002-0585-5636
  • Urgel, José I.
  • Paradinas, Markos|||0000-0003-1006-9506
  • Panighel, Mirco|||0000-0001-8413-5196
  • Ajejas, Fernando
  • Niño, Miguel A.
  • Gallego, José Maria
  • Valvidares, Manuel|||0000-0003-4895-8114
  • Gargiani, Pierluigi|||0000-0002-6649-0538
  • Kuch, Wolfgang
  • Martínez, José I.
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Camarero, Julio|||0000-0003-0078-7280
  • Miranda, Rodolfo
  • Perna, Paolo
  • Écija, David
Taming the magnetic anisotropy of lanthanides through coordination environments is crucial to take advantage of the lanthanides properties in thermally robust nanomaterials. In this work, the electronic and magnetic properties of Dy-carboxylate metal-organic networks on Cu(111) based on an eightfold coordination between Dy and ditopic linkers are inspected. This surface science study based on scanning probe microscopy and X-ray magnetic circular dichroism, complemented with density functional theory and multiplet calculations, reveals that the magnetic anisotropy landscape of the system is complex. Surface-supported metal-organic coordination is able to induce a change in the orientation of the easy magnetization axis of the Dy coordinative centers as compared to isolated Dy atoms and Dy clusters, and significantly increases the magnetic anisotropy. Surprisingly, Dy atoms coordinated in the metallosupramolecular networks display a nearly in-plane easy magnetization axis despite the out-of-plane symmetry axis of the coordinative molecular lattice. Multiplet calculations highlight the decisive role of the metal-organic coordination, revealing that the tilted orientation is the result of a very delicate balance between the interaction of Dy with O atoms and the precise geometry of the crystal field. This study opens new avenues to tailor the magnetic anisotropy and magnetic moments of lanthanide elements on surfaces.