Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Biomimetic Synthesis of Sub-20 nm Covalent Organic Frameworks in Water

  • Franco, Carlos
  • Rodríguez-San-Miguel, David
  • Sorrenti, Alessandro
  • Sevim, Semih
  • Pons, Ramon
  • Platero Prats, Ana Eva
  • Parlovic, Marko
  • Szilágyi, Istvan
  • Ruiz Gonzalez, M. Luisa
  • González-Calbet, José M.
  • Bochicchio, Davide
  • Pesce, Luca
  • Pavan, Giovanni M.
  • Imaz, Inhar
  • Cano-Sarabia, Mary
  • Maspoch, Daniel
  • Pané, Salvador
  • Mello, Andrew J. de
  • Zamora Abanades, Félix Juan
  • Puigmartí-Luis, Josep
This document is the Accepted Manuscript version of a Published Work that appeared in final form in Journal of the American Chemical Society, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/jacs.9b12389, Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas, This work was supported by the European Union (ERC-2015-STG microCrysFact 677020), the Swiss National Science Foundation (Project No. 200021_181988), ETH Zürich and Ministry of Science, Innovation and Universities MICINN (MAT2016-77608-C3-1P). R.P. acknowledges the Spanish MINECO (Grant No. CTQ2017—88948-P). A.E.P.P. acknowledges a TALENTO grant (2017-T1/IND5148) from Comunidad de Madrid. I.S. acknowledges the Ministry of Human Capacities of Hungary (20391-/2018/FEKUSTRAT). G.M.P. acknowledges the funding received by the Swiss National Science Foundation (SNSF grant number 200021_175735) and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 818776 - DYNAPOL). D.M. acknowledges financial support from the European Union (ERC-Co 615954). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). S.P. acknowledges funding from a Consolidator Grant from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 771565). We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Synchrotron X-ray diffraction experiments with COF-TAPB-BTCA were carried out at the beamline P02.1 PETRA III under the proposal I-20170717 EC. We acknowledge Jaume Caelles for SAXS/WAXS measurements performed at IQAC–CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomimetic Synthesis of Sub-20 nm Covalent Organic Frameworks in Water

  • Franco, Carlos
  • Rodríguez-San-Miguel, David
  • Alessandro Sorrenti
  • Sorrenti, Alessandro
  • Sevim, Semih
  • Pons Pons, Ramon
  • Platero-Prats, Ana E.
  • Pavlovic, Marko
  • Szilágyi, Istvan
  • González Calbet, José M.
  • Ruiz Gonzalez, M. Luisa
  • Bochicchio, Davide
  • Pesce, Luca
  • Pavan, Giovanni M.
  • Imaz, Inhar
  • Cano-Sarabia, Mary
  • Maspoch, Daniel
  • Pané, Salvador
  • de Mello, Andrew J.
  • Zamora, Felix
  • Puigmartí-Luis, Josep
Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas., This work was supported by the European Union (ERC-2015-STG microCrysFact 677020), the Swiss National Science Foundation (Project No. 200021_181988), ETH Zürich and Ministry of Science, Innovation and Universities MICINN (MAT2016-77608-C3-1P). R.P. acknowledges the Spanish MINECO (Grant No. CTQ2017—88948-P). A.E.P.P. acknowledges a TALENTO grant (2017-T1/IND5148) from Comunidad de Madrid. I.S. acknowledges the Ministry of Human Capacities of Hungary (20391-/2018/FEKUSTRAT). G.M.P. acknowledges the funding received by the Swiss National Science Foundation (SNSF grant number 200021_175735) and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 818776 - DYNAPOL). D.M. acknowledges financial support from the European Union (ERC-Co 615954). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). S.P. acknowledges funding from a Consolidator Grant from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 771565). We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Synchrotron X-ray diffraction experiments with COF-TAPB-BTCA were carried out at the beamline P02.1 PETRA III under the proposal I-20170717 EC. We acknowledge Jaume Caelles for SAXS/WAXS measurements performed at IQAC–CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain gradient mediated magnetoelectricity in Fe-Ga/P(VDF-TrFE) multiferroic bilayers integrated on silicon

  • Nicolenco, Aliona
  • Gómez Rodríguez, Andrés
  • Chen, Xiang-Zhong
  • Menéndez, Enric
  • Fornell, Jordina
  • Pané, Salvador
  • Pellicer, Eva
  • Sort, Jordi
The primary advantage of magnetoelectric heterostructures exhibiting direct magnetoelectric effect is the possibility to induce and modulate the electrical response of the ferroelectric phase directly with an external magnetic field (i.e., wirelessly, without applying electric field). Nevertheless, the magnetoelectric coupling in such heterostructures is commonly limited by substrate clamping which hinders effective strain propagation. In this work, 1 μm thick ferromagnetic Fe-Ga layers were electrodeposited onto rigid Si/Cu substrates and subsequently coated with ferroelectric P(VDF-TrFE). Under magnetic field, the (110) textured Fe-Ga alloy is compressed along the z-direction by 0.033%, as demonstrated by X-ray diffraction. The experimental results suggest that while the bottom of the Fe-Ga layer is clamped, its air side exhibits a pronounced tetragonal deformation thanks to the residual nanoporosity existing between the columnar grains, that is, a strain gradient develops across the thickness of the Fe-Ga film. This strain gradient in Fe-Ga induces a change in the piezoresponse of the adjacent ferroelectric P(VDF-TrFE) layer. These results pave the way to the design of high-performance microelectromechanical systems (MEMS) with magnetoelectric response integrated on rigid substrates., This work was supported by the Spanish Government (MAT2017-86357-C3-1-R and associated FEDER), the Generalitat de Catalunya (2017-SGR-292), the European Research Council (ERC) under the SPIN-PORICS 2014-Consolidator Grant (Agreement № 648454) and the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement nº 665919. Authors also acknowledge networking support by COST Action MP1407-STSM grant COST-STSM-MP1407-43917. J.F. acknowledges the “Juan de la Cierva” (IJCI-2015-27030) contract by the Spanish Government. S.P. acknowledges support from the ERC-2017-CoG HINBOTS Grant No. 771565., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A simple in situ marker guiding shape-controlled synthesis of iron oxide nanoparticles

  • Llacer-Wintle, Joaquin
  • Hertle, Lukas
  • Ziegler, Salomon
  • Pellicer, Eva
  • Roca, Alejandro G.
  • Nogués, Josep
  • Puigmartí Luis, Josep
  • Nelson, Bradley J.
  • Chen, Xiang-Zhong
  • Pané, Salvador
Thermal decomposition of iron oleate is a simple and widespread method for synthesizing monodispersed iron oxide nanoparticles (IONPs) with well-defined morphology. However, the complexity of the underlying mechanism makes this method rather sensitive to variations in experimental conditions, and the lack of simple techniques to monitor the reaction progress in situ usually results in poor reproducibility and time-consuming optimizations. Here, a simple, robust, and versatile in situ marker to monitor particle formation based on a sudden change in the temperature during reflux is reported. A linear relationship between the onset of particle formation and the concentration of surfactants is unveiled, corroborating a ‘chemically activated’ burst nucleation mechanism. Using this linear relationship as a guide, highly uniform spherical, cubic, and star-shaped particles between 12 and 30 nm can be obtained. This temperature marker and the derived linear relationship not only deepen the understanding of the reaction process, but also provide a powerful tool for the straightforward optimization of IONPs., S.P. acknowledges funding from a Consolidator Grant from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement No. 771565) and Swiss National Science Foundation (SNF) (No. 192012). B.N. acknowledges funding from Swiss National Science Foundation (SNF) (No. 198643). X.C. was partially supported by SNF (No. CRSK-2_190451). J.L.L. acknowledges his Ph.D. grants in the framework of the project BeMAGIC funded by the European Union's Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie (grant agreement No. 861145). J.P.-L. acknowledges support from the Agencia Estatal de Investigación (AEI) for the María de Maeztu, project no. CEX2021-001202-M, the grant PID2020-116612RB-C33 funded by MCIN/AEI/10.13039/501100011033, and the Generalitat de Catalunya for the project 2021-SGR-00270. E.P., A.G.R., and J.N. acknowledge the Generalitat de Catalunya through the 2021-SGR-00651 grant and A.G.R. and J.N acknowledge the Ministry of Science, Innovation and Universities through grants RTI2018-095495-J-I00, PID2022-138588OB-C32 and RYC2019-027449-I funded by MCIN/AEI/10.13039/501100011033. ICN2 was funded by the CERCA programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, grant funded by MCIN/AEI/10.13039./501100011033., Open access funding provided by Eidgenossische Technische Hochschule Zurich., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001202-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain gradient mediated magnetoelectricity in Fe-Ga/P(VDF-TrFE) multiferroic bilayers integrated on silicon

  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Gómez, Andrés|||0000-0003-2847-0138
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Menéndez, Enric|||0000-0003-3809-2863
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The primary advantage of magnetoelectric heterostructures exhibiting direct magnetoelectric effect is the possibility to induce and modulate the electrical response of the ferroelectric phase directly with an external magnetic field (i.e., wirelessly, without applying electric field). Nevertheless, the magnetoelectric coupling in such heterostructures is commonly limited by substrate clamping which hinders effective strain propagation. In this work, 1 μm thick ferromagnetic Fe-Ga layers were electrodeposited onto rigid Si/Cu substrates and subsequently coated with ferroelectric P(VDF-TrFE). Under magnetic field, the (110) textured Fe-Ga alloy is compressed along the z-direction by 0.033%, as demonstrated by X-ray diffraction. The experimental results suggest that while the bottom of the Fe-Ga layer is clamped, its air side exhibits a pronounced tetragonal deformation thanks to the residual nanoporosity existing between the columnar grains, that is, a strain gradient develops across the thickness of the Fe-Ga film. This strain gradient in Fe-Ga induces a change in the piezoresponse of the adjacent ferroelectric P(VDF-TrFE) layer. These results pave the way to the design of high-performance microelectromechanical systems (MEMS) with magnetoelectric response integrated on rigid substrates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Biomimetic synthesis of sub-20 nm covalent organic frameworks in water

  • Franco, Carlos|||0000-0003-3385-2851
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Sorrenti, Alessandro
  • Sevim, Semih
  • Pons, Ramon|||0000-0003-4273-9084
  • Platero-Prats, Ana Eva|||0000-0002-2248-2739
  • Pavlovic, Marko
  • Szilágyi, Istvan
  • Ruiz Gonzalez, M. Luisa
  • González-Calbet, José M.
  • Bochicchio, Davide|||0000-0002-3682-9086
  • Pesce, Luca
  • Pavan, Giovanni M.
  • Imaz, Inhar|||0000-0002-0278-1141
  • Cano-Sarabia, Mary|||0000-0003-4254-8157
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • De Mello, Andrew J.
  • Zamora, Félix|||0000-0001-7529-5120
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Biodegradable small-scale swimmers for biomedical applications

  • Llacer-Wintle, Joaquin|||0000-0002-2504-7548
  • Rivas-Dapena, Antón
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Most forms of biomatter are ephemeral, which means they transform or deteriorate after a certain time. From this perspective, implantable healthcare devices designed for temporary treatments should exhibit the ability to degrade and either blend in with healthy tissues, or be cleared from the body with minimal disruption after accomplishing their designated tasks. This topic is currently being investigated in the field of biomedical micro- and nanoswimmers. These tiny devices have the ability to move through fluids by converting physical or chemical energy into motion. Several architectures of these devices have been designed to mimic the motion strategies of nature's motile microorganisms and cells. Due to their motion abilities, these devices have been proposed as minimally invasive tools for precision healthcare applications. Hence, a natural progression in this field is to produce motile structures that can adopt, or even surpass, similar transient features as biological systems. The fate of small-scale swimmers after accomplishing their therapeutic mission is critical for the successful translation of small-scale swimmers' technologies into clinical applications. In this review, recent research efforts are summarized on the topic of biodegradable micro- and nanoswimmers for biomedical applications, with a focus on targeted therapeutic delivery.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The magnetopyroelectric effect, heat-mediated magnetoelectricity in magnetic nanoparticle-ferroelectric polymer composites

  • Llacer-Wintle, Joaquin|||0000-0002-2504-7548
  • Renz, Jan
  • Hertle, Lukas
  • Veciana, Andrea|||0000-0003-0060-0949
  • von Arx, Denis
  • Wu, Jiang
  • Bruna, Pere|||0000-0002-7411-1278
  • Vukomanovic, Marija|||0000-0001-7034-0471
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Magnetoelectricity enables a solid-state material to generate electricity under magnetic fields. Most magnetoelectric composites are developed through a strain-mediated route by coupling piezoelectric and magnetostrictive phases. However, the limited availability of high-performance magnetostrictive components has become a constraint for the development of novel magnetoelectric materials. Here, we demonstrate that nanostructured composites of magnetic and pyroelectric materials can generate electrical output, a phenomenon we refer to as the magnetopyroelectric (MPE) effect, which is analogous to the magnetoelectric effect in strain-mediated composite multiferroics. Our composite consists of magnetic iron oxide nanoparticles (IONPs) dispersed in a ferroelectric (and also pyroelectric) poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) matrix. Under a high-frequency low-magnitude alternating magnetic field, the IONPs generate heat through hysteresis loss, which stimulates the depolarization process of the pyroelectric polymer. This magnetopyroelectric approach creates a new opportunity to develop magnetoelectric materials for a wide range of applications.