Pasar al contenido principal

-

RYC-2012-11709

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Contratación e Incorporación de RRHH
Subprograma Subprograma Ramón y Cajal (RYC)
Convocatoria Ramón y Cajal
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gómez Rodríguez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia Bermejo, Ricardo
  • Oró, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gázquez, Jaume
  • Rodriguez Carvajal, Juan
  • Carretero Genevrier, Adrian
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices., A. C.-G., C. J., R. G.-B. and J. M. V.-F. acknowledge the financial support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (No. 803004) and the French Agence Nationale de la Recherche (ANR), project Q-NOSS ANR ANR-16-CE09-0006-01. This project has received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3, the Spanish Ministry of Economy and Competitivity through Project MAT2017-82970-C2-2-R, and the Aragon Regional Government through Project No. E13_20R (with European Social Fund). We acknowledge SOLEIL for provision of synchrotron radiation facilities, and we would like to thank Pierre Fertey for assistance in using beamline Cristal. J. G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The authors thank D. Montero for providing the FEGSEM images. N. M. acknowledges the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa FUNFUTURE (CEX2019-000917-S) and SUMATE (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund. The FEGSEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (IMPC FR2482). The authors thank Frederic Pichot for his expertise and advice during the nanowire lithographic process. The STEM microscopy work was conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Double-cell superstructure and vacancy ordering in tensile-strained metallic thin films of P r0.50 C a0.50Co O3 on LaAl O3

  • Padilla-Pantoja, Jessica
  • Torrelles, Xavier
  • Gazquez, Jaume
  • Rubio-Zuazo, Juan
  • Blasco, Javier
  • Herrero-Martín, Javier
  • García-Muñoz, José Luis
The Pr-based cobaltate Pr0.5Ca0.5CoO3 (PCCO) presents in bulk form a singular simultaneous valence and spin-state transition that turns the metallic state into insulator, and displays a large and ultrafast photoresponse in the insulating phase. Epitaxial thin films of PCCO have been grown by deposition on LaAlO3(001) (LAO) substrate, chosen to minimize the mismatch with the film. The films grow epitaxially with two times the substrate periodicity (2a0×2a0×2a0) and the long perovskite axis perpendicular to the surface. We report a reduction of the structural symmetry from Pnma (bulk) to P212121 (film). The P212121 symmetry revealed by synchrotron x ray remains at low temperatures. These PCCO films are metallic, and ferromagnetic below TC=170K, confirming the stabilization of excited Co3+ spin states and the suppression of the concurrent Co spin-state, valence, and metal-insulator transitions. Z-contrast imaging and electron-energy-loss spectroscopy elemental maps reveal long-range ordered oxygen vacancy planes unexpectedly stacking parallel to the interface, in spite of the tensile character of the PCCO/LAO heterostructure. In contrast to the general tendency reported for strained La0.5Sr0.5CoO3-d (LSCO) films, we show that a nominal tensile strain can be also compatible with the presence of alternating O vacancy planes parallel to the interface, instead of perpendicular to it. That occurs thanks to the double cell of the film and the formation of the (1/2, 1/2, 1/2) superstructure studied in this work. These results expand the possibilities of controlling interfacial physical properties via engineering of ordered oxygen-defect structures in strongly correlated oxides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Control of nanostructure and pinning properties in solution deposited YBaCuO nanocomposites with preformed perovskite nanoparticles

  • Li, Ziliang
  • Coll, Mariona|||0000-0001-5157-7764
  • Mundet, Bernat|||0000-0003-0608-2070
  • Chamorro, Natalia|||0000-0002-9531-1869
  • Vallès, Ferran
  • Palau, Anna|||0000-0002-2217-164X
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Ricart, Susagna
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
Solution deposited YBaCuO (YBCO) nanocomposites with preformed nanoparticles represent a promising cost-effective approach for superior critical current properties under applied magnetic fields. Nonetheless, the majority of YBCO nanocomposites with high nanoparticle loads (>20%) suffer from nanoparticle coalescence and degraded superconducting properties. Here, we study the influence of nanoparticle concentration (0-25% mol), size (5 nm-10 nm) and composition (BaHfO, BaZrO) on the generation of structural defects in the epitaxial YBCO matrix, key parameter for vortex pinning. We demonstrate that flash-heated superconducting nanocomposites with 20 mol% preformed BaHfO or BaZrO perovskite secondary phases feature discrete and small (7 nm) nanoparticles and high density of YBaCuO (Y248) intergrowths. We identify a synergy between Y248 intergrowth density and small nanoparticles to increase artificial vortex pinning centers. Also, we validate the multideposition process to successfully increase film thickness of epitaxial nanocomposites with competitive critical currents I at 77 K.