Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gomez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia-Bermejo, Ricardo
  • Oró-Solé, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gazquez, Jaume
  • Rodriguez-Carvajal, Juan
  • Carretero-Genevrier, Adrián
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the crystal growth of quartz on silicon for patterning epitaxial piezoelectric films

  • Zhang, Qianzhe
  • Sánchez Fuentes, David
  • Gómez Rodríguez, Andrés
  • Desgarceaux, Rudy
  • Charlot, Benoit
  • Gázquez, Jaume
  • Carretero Genevrier, Adrian
  • Gich, Martí
Epitaxial films of piezoelectric alpha-quartz could enable the fabrication of sensors with unprecedented sensitivity for prospective applications in electronics, biology and medicine. However, the prerequisites are harnessing the crystallization of epitaxial alpha-quartz and tailoring suitable film microstructures for nanostructuration. Here, we bring new insights into the crystallization of epitaxial alpha-quartz films on silicon (100) from the devitrification of porous silica and the control of the film microstructures: we show that by increasing the quantity of devitrifying agent (Sr) it is possible to switch from an alpha-quartz microstructure consisting of a porous flat film to one dominated by larger, fully dense alpha-quartz crystals. We also found that the film thickness, relative humidity and the nature of the surfactant play an important role in the control of the microstructure and homogeneity of the films. Via a multi-layer deposition method, we have extended the maximum thickness of the alpha-quartz films from a few hundreds of nm to the mu m range. Moreover, we found a convenient method to combine this multilayer approach with soft lithography to pattern silica films while preserving epitaxial crystallization. This improved control over crystallization and the possibility of preparing patterned films of epitaxial alpha-quartz on Si substrates pave the path to future developments in applications based on electromechanics, optics and optomechanics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micro/Nanostructure Engineering of Epitaxial Piezoelectric α-Quartz Thin Films on Silicon

  • Zhang, Qianzhe
  • Sánchez Fuentes, David
  • Desgarceaux, Rudy
  • Escofet Majoral, Pau
  • Oró, Judith
  • Gázquez, Jaume
  • Larrieu, Guilhem
  • Charlot, Benoit
  • Gómez Rodríguez, Andrés
  • Gich, Martí
  • Carretero Genevrier, Adrian
The monolithic integration of sub-micron quartz structures on silicon substrates is a key issue for the future development of piezoelectric devices as prospective sensors with applications based on the operation in the high-frequency range. However, to date, it has not been possible to make existing quartz manufacturing methods compatible with integration on silicon and structuration by top-down lithographic techniques. Here, we report an unprecedented large-scale fabrication of ordered arrays of piezoelectric epitaxial quartz nanostructures on silicon substrates by the combination of soft-chemistry and three lithographic techniques: (i) laser interference lithography, (ii) soft nanoimprint lithography on Sr-doped SiO2 sol–gel thin films, and (iii) self-assembled SrCO3 nanoparticle reactive nanomasks. Epitaxial α-quartz nanopillars with different diameters (from 1 μm down to 50 nm) and heights (up to 2 μm) were obtained. This work demonstrates the complementarity of soft-chemistry and top-down lithographic techniques for the patterning of epitaxial quartz thin films on silicon while preserving its epitaxial crystallinity and piezoelectric properties. These results open up the opportunity to develop a cost-effective on-chip integration of nanostructured piezoelectric α-quartz MEMS with enhanced sensing properties of relevance in different fields of application., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program, project SENSiSOFT (no. 803004); the French Agence Nationale pour la Recherche (ANR), project Q-NOSS ANR ANR-16-CE09-0006-01; the Spanish Ministry of Science Innovation and Universities in cofunding with European social funds through the Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496) and the Ramón y Cajal program (RyC-2012-11709 to J.G.); and the Generalitat de Catalunya (2017SGR00765). Q.Z. was financially supported by the China Scholarship Council (CSC) with no. 201506060170. Q.Z.’s work was done as a part of the PhD program in Materials Science at Universitat Autònoma de Barcelona. The authors thank the “Laboratorio de Microscopías Avanzadas-Instituto de Nanociencia de Aragón” for offering their expertise in the preparation of TEM cross sections. A. Crespi from XRD diffraction service is acknowledged for pole figure measurements. FEG-SEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (IMPC FR2482) and was funded by Sorbonne Université, CNRS and by the C’Nano projects of the Région Ile-de-France. We thank David Montero for performing the FEG-SEM images., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Soft‐Chemistry‐Assisted On‐Chip Integration of Nanostructured α‐Quartz Microelectromechanical System

  • Jolly, Claire
  • Gómez Rodríguez, Andrés
  • Sánchez Fuentes, David
  • Cakiroglu, Dilek
  • Rathar, Raïssa
  • Maurin, Nicolas
  • Garcia Bermejo, Ricardo
  • Charlot, Benoit
  • Gich, Martí
  • Bahriz, Michael
  • Picas, Laura
  • Carretero Genevrier, Adrian
The development of advanced piezoelectric α‐quartz microelectromechanical system (MEMS) for sensing and precise frequency control applications requires the nanostructuration and on‐chip integration of this material on silicon material. However, the current quartz manufacturing methods are based on bonding bulk micromachined crystals on silicon, which limits the size, the performance, the integration cost, and the scalability of quartz microdevices. Here, chemical solution deposition, soft‐nanoimprint lithography, and top‐down microfabrication processes are combined to develop the first nanostructured epitaxial (100)α‐quartz/(100)Si piezoelectric cantilevers. The coherent Si/quartz interface and film thinness combined with a controlled nanostructuration on silicon–insulator–silicon technology substrates provide high force and mass sensitivity while preserving the mechanical quality factor of the microelectromechanical systems. This work proves that biocompatible nanostructured epitaxial piezoelectric α‐quartz‐based MEMS on silicon can be engineered at low cost by combining soft‐chemistry and top‐down lithographic techniques., This project had received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (project SENSiSOFT No.803004). L.P. acknowledges the ATIP–Avenir program for financial support. The authors thank C. André for providing the transfected HT1080 cell line and C. Cazevielle (MRI‐COMET, Montpellier) for assistance with biological SEM images. The authors thank D. Montero for performing the FEG–SEM images and chemical analysis. The FEG–SEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (Grant No. IMPC FR2482) and was funded by Sorbonne Université, CNRS and by the C'Nano projects of the Région Ile‐de‐France. The authors thank Frederic Pichot, David Bourrier, and Guilhem Larrieu for the expertise and advice during the cantilever lithographic processes. The authors also thank Wioletta Trzpil, Frank Augereau, and Eric Rosenkrantz for the advice during vibrometry measurements. A.G and M.G acknowledge funding from the Spanish Ministerio de Ciencia e Innovacion through the severo Ochoa program (CEX2019‐000917‐S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal engineering and ferroelectricity at the nanoscale in epitaxial 1D manganese oxide on silicon

  • Gómez Rodríguez, Andrés
  • Vila Fungueiriño, José Manuel
  • Jolly, Claire
  • Garcia Bermejo, Ricardo
  • Oró, Judith
  • Ferain, Etienne
  • Mestres, Narcís
  • Magén, César
  • Gázquez, Jaume
  • Rodriguez Carvajal, Juan
  • Carretero Genevrier, Adrian
Ferroelectric oxides have attracted much attention due to their wide range of applications, particularly in electronic devices such as nonvolatile memories and tunnel junctions. As a result, the monolithic integration of these materials into silicon technology and their nanostructuration to develop alternative cost-effective processes are among the central points in the current technology. In this work, we used a chemical route to obtain nanowire thin films of a novel Sr1+δMn8O16 (SMO) hollandite-type manganese oxide on silicon. Scanning transmission electron microscopy combined with crystallographic computing reveals a crystal structure comprising hollandite and pyrolusite units sharing the edges of their MnO6 octahedra, resulting in three types of tunnels arranged along the c axis, where the ordering of the Sr atoms produces natural symmetry breaking. The novel structure gives rise to ferroelectricity and piezoelectricity, as revealed by local direct piezoelectric force microscopy measurements, which confirmed the ferroelectric nature of the SMO nanowire thin films at room temperature and showed a piezoelectric coefficient d33 value of 22 ± 6 pC N−1. Moreover, we proved that flexible vertical SMO nanowires can be harvested providing an electrical output energy through the piezoelectric effect, showing excellent deformability and high interface recombination. This work indicates the possibility of engineering the integration of 1D manganese oxides on silicon, a step which precedes the production of microelectronic devices., A. C.-G., C. J., R. G.-B. and J. M. V.-F. acknowledge the financial support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (No. 803004) and the French Agence Nationale de la Recherche (ANR), project Q-NOSS ANR ANR-16-CE09-0006-01. This project has received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by ICMAB-CSIC in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3, the Spanish Ministry of Economy and Competitivity through Project MAT2017-82970-C2-2-R, and the Aragon Regional Government through Project No. E13_20R (with European Social Fund). We acknowledge SOLEIL for provision of synchrotron radiation facilities, and we would like to thank Pierre Fertey for assistance in using beamline Cristal. J. G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The authors thank D. Montero for providing the FEGSEM images. N. M. acknowledges the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa FUNFUTURE (CEX2019-000917-S) and SUMATE (RTI2018-095853-B-C21) projects, co-financed by the European Regional Development Fund. The FEGSEM instrumentation was facilitated by the Institut des Matériaux de Paris Centre (IMPC FR2482). The authors thank Frederic Pichot for his expertise and advice during the nanowire lithographic process. The STEM microscopy work was conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable wafer-scale integration of epitaxial ZnO on silicon for piezoelectric devices

  • Sanchez-Fuentes, David
  • Garcia Bermejo, Ricardo
  • Magén, César
  • Carretero Genevrier, Adrian
Adrian Carretero-Genevrier: et al., To sustainably support the ongoing energetic transition, we need metal oxides capable of converting energy and produce sensing devices. However, these materials suffer from a high economic cost of manufacturing, and their production in a sustainable way is, to date, a milestone. Additionally, the technical challenges, such as scalability and integration on silicon for industrial processing using microelectronic technologies, impose strict conditions for the entire materials process. In this work, we engineer α-quartz virtual substrates up to 4 inches, facilitating the large-scale and sustainable integration of epitaxial ZnO microwire films on silicon. These materials are manufactured on silicon by using solution chemistry, providing single-chip solutions that can meet strict economic constraints for developing sustainable devices at a lower cost. Through this integrative technology, we demonstrate the microfabrication of epitaxial (110)ZnO/(100)α-quartz/(100)silicon piezoelectric membrane resonators at the wafer scale with potential applications in energy conversion and sensing. We combined four-dimensional (4D) STEM diffraction and piezoelectric force microscopy (PFM) to establish a correlation between out-of-plane crystalline strain and piezoelectric response in epitaxial (110)ZnO at the microscale. Finally, we proved the fabrication of 800 nm thick (110)ZnO suspended membranes that can be transferred to flexible substrates, making them suitable for flexible devices., This project received funding from the European Research Council (ERC) through the European Union’s Horizon 2020 program (project SENSiSOFT No. 803004). We also thank Project No. PID2020-118479RBI00 and PID2023-147211OB-C22 for their financial support. Frederic Pichot provided valuable expertise and advice during the membrane lithography processes at the CTM platform, and we appreciate his help. The U.S. Department of Energy’s Office of Science, Materials Sciences and Engineering Division supported the electron microscopy work at ORNL. The Institut des Matériaux de Paris Centre (IMPC FR2482) facilitated the FEGSEM instrumentation, with funding from Sorbonne Université, CNRS, and the C’Nano projects of the Île-de-France region. We also thank David Montero for taking the FEGSEM images. We would like to thank Mariana Trifonova for preparing the TEM lamellae, as well as the Scientific and Technical Resources Service at Rovira i Virgili University. The microscopy work was done at the Center for Nanophase Materials Sciences, a facility supported by the DOE Office of Science., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sustainable Wafer-Scale Integration of Epitaxial ZnO on Silicon for Piezoelectric Devices

  • Sánchez-Fuentes, David
  • Rahal, Abbes
  • Desgarceaux, Rudy
  • García, Lorenzo
  • Bouisri, Samir
  • Ding, Sijie
  • Camara, Nicolás
  • Pascal, Fabien
  • García-Bermejo, Ricardo
  • Guillaume, Nicolas
  • Ardila, Gustavo
  • Gazquez, Jaume
  • Magén, César
  • Plana-Ruiz, Sergi
  • Guasch, Cathy
  • Carretero-Genevrier, Adrian
To sustainably support the ongoing energetic transition, we need metal oxides capable of converting energy and produce sensing devices. However, these materials suffer from a high economic cost of manufacturing, and their production in a sustainable way is, to date, a milestone. Additionally, the technical challenges, such as scalability and integration on silicon for industrial processing using microelectronic technologies, impose strict conditions for the entire materials process. In this work, we engineer α-quartz virtual substrates up to 4 inches, facilitating the large-scale and sustainable integration of epitaxial ZnO microwire films on silicon. These materials are manufactured on silicon by using solution chemistry, providing single-chip solutions that can meet strict economic constraints for developing sustainable devices at a lower cost. Through this integrative technology, we demonstrate the microfabrication of epitaxial (110)ZnO/(100)α-quartz/(100)silicon piezoelectric membrane resonators at the wafer scale with potential applications in energy conversion and sensing. We combined four-dimensional (4D) STEM diffraction and piezoelectric force microscopy (PFM) to establish a correlation between out-of-plane crystalline strain and piezoelectric response in epitaxial (110)ZnO at the microscale. Finally, we proved the fabrication of 800 nm thick (110)ZnO suspended membranes that can be transferred to flexible substrates, making them suitable for flexible devices.