Pasar al contenido principal

SIMETRIA Y BAJA DIMENSIONALIDAD COMO PLATAFORMA PARA MATERIALES ESPINTRONICOS Y FOTOCONVERSION

PID2020-118479RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Band Alignment and Photoresponse of LaFe O3 -Based Heterojunctions

  • Sheng, Yunwei|||0000-0001-8173-0483
  • Mirjolet, Mathieu|||0000-0002-8471-3184
  • Villa Navas, Mario|||0000-0003-2949-5628
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Santiso, José|||0000-0003-4274-2101
  • Klein, Andreas
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Fontcuberta, Josep|||0000-0002-7955-2320
Epitaxial LaFeO3 (LFO)-based photocells, of different thicknesses (50-200 nm) have been grown on cubic LSAT (001) [(LaAlO3)0.3(Sr2TaAlO6)0.7] single-crystal substrates, using a La2/3Sr1/3MnO3 (LSMO) bottom electrode and different top electrodes [Pt,Ba0.95La0.05SnO3 (BLSO)], to determine their photoresponse. The measured short-circuit photocurrent first increases with LFO thickness and then decreases, and it is larger or smaller, when Pt or BLSO electrodes are used, respectively. The corresponding open-circuit voltage displays the opposite trend, being smaller or larger for Pt and BLSO, respectively, which is in excellent agreement with the electronic band alignments determined by x-ray photoelectron spectroscopy and also consistent with the rectifying character of the dark current-voltage data. It turns out that the films display a complex microstructure containing different variants, strained and relaxed, of the orthorhombic LaFeO3, that evolves with film thickness and entails the presence of strain gradients and, possibly, flexoelectric fields. We discuss these data and propose that the unavoidable grain boundaries between differently textured LaFeO3 crystallites play a significant role on the observed responsivity (2.6 × 10-4 A W-1), found to be larger than in related LFO-based structures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Anionic and Magnetic Ordering in Rare Earth Tantalum Oxynitrides with an n = 1 Ruddlesden-Popper Structure

  • Guarín, Jhonatan R.
  • Frontera, Carlos|||0000-0002-0091-4756
  • Oró-Solé, Judith|||0000-0002-3755-4950
  • Colombel, Bastian
  • Ritter, Clemens
  • Fauth, François|||0000-0001-9465-3106
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Fuertes, Amparo|||0000-0001-5338-9724
The new compounds RTaON with R = La, Ce, Nd, and Eu and 1.20 ≤ x ≤ 2.81 have been obtained by a solid-state reaction between metal nitrides and oxides or oxynitrides under N gas at temperatures between 1200 and 1700 °C. They are the first examples of rare earth transition metal oxynitrides with an n = 1 Ruddlesden-Popper structure and show different anion stoichiometries, crystal structures, and magnetic properties. Synchrotron X-ray powder diffraction and electron diffraction indicate that the lanthanum, cerium, and neodymium compounds crystallize in the orthorhombic space group Pccn, with cell parameters a = 5.72949(2), b = 5.73055(5), and c = 12.77917(6) Å for LaTaON, a = 5.70500(5), b = 5.71182(4), and c = 12.61280(7) Å for CeTaON, and a = 5.70466(3), b = 5.70476(5), and c = 12.32365(5) Å for NdTaON. In contrast, EuTaON shows a tetragonal I 4/ acd superstructure doubling the c axis, with parameters a = 5.71867(2) and c = 25.00092(19) Å. Refinement of neutron powder diffraction data of CeTaON indicated the nitrogen order in the two equatorial positions of the tantalum octahedron, with refined N/O occupancies of 0.930(7)/0.070 and 0.876(13)/0.124, and the axial position is occupied by 50% of each anion. This anion ordering agrees with the distribution predicted by Pauling's second crystal rule. Magnetization measurements show that the cerium and europium compounds are ordered magnetically at low temperatures, while the neodymium compound remains paramagnetic down to 2 K, as a consequence of suppression of the effective magnetic moment of the latter when reducing the temperature.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient spin pumping into metallic SrVO3 epitaxial films

  • Macià, Ferran
  • Mirjolet, Mathieu
  • Fontcuberta, Josep
Spin pumping across interfaces between metallic SrVO3, where V is a 3d1 ion, epitaxial thin films and ferromagnetic Ni80Fe20 is reported. Data shows an efficient spin pumping with a spin mixing conductance value ( 11.8 × 1018 m−2) similar to that reported in metallic Vanadium but significantly larger than that measured in isoelectronic (3d1) VO2, which displays a Mott transition. Data are rationalized in terms of the relevance of density of states at the Fermi level and the relative strength of electron–electron correlations and electron-lattice coupling as toggles to tune spin-mixing conductance across interfaces., Financial support from the Spanish Ministry of Science and Innovation, through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), MAT2017-85232-R (AEI/FEDER, EU), and PID2020-118479RB-I00 projects, and from Generalitat de Catalunya (2017 SGR 1377) is acknowledged. F.M. acknowledges funding from MCIN/AEI/10.13039/501100011033 through grant number: PID2020-113024GB-100. We are thankful to Dr. J. Santiso for support on X-ray diffraction data collection., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Orbital occupancy and hybridization in strained SrV O 3 epitaxial films

  • Mirjolet, Mathieu
  • Vasili, Hari Babu
  • Valadkhani, Adrian
  • Santiso, José
  • Borisov, Vladislav
  • Gargiani, Pierluigi
  • Valvidares, Manuel
  • Valenti, Roser
  • Fontcuberta, Josep
Oxygen packaging in transition metal oxides determines the metal-oxygen hybridization and electronic occupation at metal orbitals. Strontium vanadate (SrVO3), having a single electron in a 3d orbital, is thought to be the simplest example of strongly correlated metallic oxides. Here, we determine the effects of epitaxial strain on the electronic properties of SrVO3 thin films, where the metal-oxide sublattice is corner connected. Using x-ray absorption and x-ray linear dichroism at the VL2,3 and O K edges, it is observed that tensile or compressive epitaxial strain change the hierarchy of orbitals within the t2g and eg manifolds. Data show a remarkable 2p−3d hybridization, as well as a strain-induced reordering of the V3d(t2g, eg) orbitals. The latter is itself accompanied by a consequent change of hybridization that modulates the hybrid π ∗ and σ ∗ orbitals and the carrier population at the metal ions, challenging a rigid band picture., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R project, from the AEI/FEDER, UE (PID2020-118479RB-I00), and from Generalitat de Catalunya (2017 SGR 1377), is acknowledged. The work of M.M. has been done as a part of the Ph.D. program in Physics at Universitat Autònoma de Barcelona and was financially supported by the Spanish Ministry of Science, Innovation and Universities (BES-2015-075223). A.V. and R.V. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) for funding through TRR 288-422213477 (Project B05). J.S. acknowledges support from Project No. 2017 SGR 579 from AGAUR, Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Temperature Synthesis and Dielectric Properties of LaTaON2

  • Castets, Augustin
  • Fina, Ignasi
  • Guarín, Jhonatan R
  • Oró, Judith
  • Frontera, Carlos
  • Ritter, Clemens
  • Fontcuberta, Josep
  • Fuertes, Amparo
The development of new synthetic methodologies of perovskite oxynitrides is challenging but necessary for the search of new compounds and the investigation of new properties. Here, we report a new method of preparation of the perovskite LaTaON2 that has been investigated as a pigment and photocatalyst for water splitting. The synthesis proceeds through the solid-state reactions under N2 at 1500 °C between La2O3, LaN, and Ta3N5 or between LaN and TaON, which are completed after 3 h and lead to sintered, highly crystalline samples with particle sizes up to 1 μm. Nitrogen-deficient samples LaTaO1+xN2-x with x ≤ 0.35 are prepared by changing the N/O ratio in the mixture of reactants. Electron diffraction, synchrotron diffraction, and neutron diffraction studies on stoichiometric and nitrogen-deficient compounds indicate that they crystallize in the monoclinic space group I2/m with lattice parameters for LaTaON2 of a = 5.71458(7), b = 8.05987(10), c = 5.74772(6) Å, and β = 89.982(3)°. The three anion sites of the I2/m structure are partially occupied by oxygen and nitrogen, with a preference of nitride for two positions with occupancies of 77 and 88%. This anion distribution is different from that reported in previous studies of samples prepared by ammonolysis at lower temperature, suggesting that the synthesis conditions affect the anion order of this perovskite. Optical measurements indicate a band gap of about 1.9 eV, which is close to that observed in samples prepared by other methods. The determined dielectric permittivity for LaTaON2 εr ≈ 200, reported for the first time for a highly nitrided pseudocubic perovskite, is similar to that observed in perovskites with one nitrogen per formula., This work was supported by the Ministerio de Ciencia e Innovación, Spain [MAT2017-86616-R, MAT2017-85232-R, PID2019-107727RB-I00, PID2020-113805GB-I00, PID2020-118479RB-I00, and CEX2019-000917-S], from Generalitat de Catalunya (2017SGR1377 and 2017SGR581) and from CSIC through the i-LINK (LINKA20338) program. The authors thank Alba and ILL for beam time provision (experiments 2017092391 and 5-21-1113, respectively), Dr. François Fauth for assistance in data collection at Alba, and Dr. Bernat Bozzo (ICMAB-CSIC) for performing electrical measurements. The project was also supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. I.F. acknowledges the Ramón y Cajal contract RYC-2017-22531 and JRG acknowledges the AEAT predoctoral fellowship PRE2018-085204., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Orbital occupancy and hybridization in strained SrV O3 epitaxial films

  • Mirjolet, Mathieu
  • Vasili, Hari Babu
  • Valadkhani, Adrian
  • Santiso, José
  • Borisov, Vladislav
  • Gargiani, Pierluigi
  • Valvidares, Manuel
  • Valentí, Roser
  • Fontcuberta, Josep
Oxygen packaging in transition metal oxides determines the metal-oxygen hybridization and electronic occupation at metal orbitals. Strontium vanadate (SrVO3), having a single electron in a 3d orbital, is thought to be the simplest example of strongly correlated metallic oxides. Here, we determine the effects of epitaxial strain on the electronic properties of SrVO3 thin films, where the metal-oxide sublattice is corner connected. Using x-ray absorption and x-ray linear dichroism at the VL2,3 and O K edges, it is observed that tensile or compressive epitaxial strain change the hierarchy of orbitals within the t2g and eg manifolds. Data show a remarkable 2p-3d hybridization, as well as a strain-induced reordering of the V3d(t2g,eg) orbitals. The latter is itself accompanied by a consequent change of hybridization that modulates the hybrid π∗ and σ∗ orbitals and the carrier population at the metal ions, challenging a rigid band picture., Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R project, from the AEI/FEDER, UE (PID2020-118479RB-I00), and from Generalitat de Catalunya (2017 SGR 1377), is acknowledged. The work of M.M. has been done as a part of the Ph.D. program in Physics at Universitat Autònoma de Barcelona and was financially supported by the Spanish Ministry of Science, Innovation and Universities (BES-2015-075223). A.V. and R.V. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) for funding through TRR 288-422213477 (Project B05). J.S. acknowledges support from Project No. 2017 SGR 579 from AGAUR, Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced electroresistance endurance of capped Hf0.5Zr0.5O2 ultrathin epitaxial tunnel barriers

  • Long, Xiao
  • Tan, Huan
  • Estandía, Saúl
  • Gázquez, Jaume
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
Electroresistance in ultrathin Hf0.5Zr0.5O2 (HZO) films is pivotal toward the implementation of hafnia-based ferroelectrics in electronics. Here, we show that the electroresistance yield and endurance of large capacitors (∼314 μm2) of epitaxial HZO films only 2.2 nm thick grown on SrTiO3 or GdScO3 can be improved using 1 nm SrTiO3 capping layers. It is argued that the main role of the capping layer is to minimize charge transport along grain boundaries, and, thus, a similar strategy can be explored in polycrystalline films., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa FUNFUTURE (Grant No. CEX2019-000917-S) and Grant Nos. PID2019-107727RB-I00, PID2020-112548RB-I00, and PID2020-118479RB-I00; the Consejo Superior de Investigaciones Científicas through i-LINK (Grant No. LINKA20338) program; and the Generalitat de Catalunya (Grant No. 2017 SGR 1377) are acknowledged. This project was supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. Xiao Long and Huan Tan are financially supported by the China Scholarship Council (CSC) under Grant Nos. 201806100207 and 201906050014. The work of Xiao Long and Huan Tan was done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. Saúl Estandía acknowledges the Spanish Ministry of Economy, Competitiveness and Universities for his Ph.D. Contract (No. SEV-2015-0496-16-3) and its cofunding by the ESF., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-gap s± -wave superconductivity at an oxide interface

  • Singh, Gyanendra
  • Venditti, G.
  • Saiz, Guilhem
  • Herranz, Gervasi
  • Sánchez Barrera, Florencio
  • Jouan, Alexis
  • Feuillet-Palma, Chéryl
  • Lesueur, Jerome
  • Grilli, Marco
  • Caprara, Sergio
  • Bergeal, ‪Nicolas
After half a century of debate, superconductivity in doped SrTiO3 has come to the fore again with the discovery of interfacial superconductivity in the LaAlO3 /SrTiO3 heterostructures. While these interfaces share the interesting properties of bulk SrTiO3, quantum confinement generates a complex band structure involving bands with different orbital symmetries whose occupancy is tunable by electrostating doping. Multigap superconductivity has been predicted to emerge in LaAlO3 /SrTiO3 at large doping, with a Bose-Einstein condensation character at the Lifshtiz transition. In this article, we report on the measurement of the upper critical magnetic field Hc2 of superconducting (110)-oriented LaAlO3 /SrTiO3 heterostructures and evidence a two-gap superconducting regime at high doping. Our results are quantitatively explained by a theoretical model based on the formation of an unconventional s±-wave superconducting state with a repulsive coupling between the two condensates., This work was supported by the ANR PRC (QUANTOP), by the QuantERA ERA-NET Cofund in Quantum Technologies (Grant Agreement No. 731473) implemented within the European Union’s Horizon 2020 Program (QUANTOX) and the Île de France SESAME program, by the PID2020-118479RB-I00, PID2020-112548RB-100 and Severo Ochoa FUNFUTURE (CEX2019-000917-S) projects of the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), by the Generalitat de Catalunya (2017 SGR 1377), by Sapienza Università di Roma, through the projects, Ateneo 2018 (Grant No. RM11816431DBA5AF), Ateneo 2019 (Grant No. RM11916B56802AFE), Ateneo 2020 (Grant No. RM120172A8CC7CC7), and by the Italian Ministero dell’Istruzione, dell’Università e della Ricerca, through the Project No. PRIN 2017Z8TS5B. G.S. acknowledges financial support from the Beatriu de Pinós Programme and the Ministry of Research and Universities of the Government of Catalonia, with research Grant No. 2019 BP 00207., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bulk photovoltaic effect modulated by ferroelectric polarization back-switching

  • Sheng, Yunwei
  • Fina, Ignasi
  • Gospodinov, Marin
  • Fontcuberta, Josep
Short-circuit photocurrent due to bulk photovoltaic effect displays an oscillatory dependence on the polarization state of light. Here, we explore how the ferroelectric polarization direction in h-LuMnO3 crystals affects the oscillating short-circuit photocurrent. It is shown that after prepoling the crystal at saturation, at remanence, the direction and amplitude of photocurrent oscillations are no longer dictated by prepoling voltage but are largely modulated by polarization back-switching, here ruled by the imprint field. Thus, the light polarization dependence of photocurrent is also ruled by the imprint field. The impact of these effects on the determination of the Glass coefficients of the material is discussed., Financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033), through the Severo Ochoa FUNFUTURE (No. CEX2019-000917-S); the TED2021-130453B-C21 (AEI/FEDER, EU), PID2020-118479RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects; and from CSIC through the i-LINK (No. LINKA20338) program is acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. Y.S. is financially supported by China Scholarship Council (CSC) through No. 201806410010. The work of Y.S. has been done as part of her Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic control of octahedral rotation in perovskites by defect engineering

  • Jia, Jiahui
  • He, Xu
  • Akhtar, Arsalan
  • Herranz, Gervasi
  • Pruneda, Miguel
Engineering oxygen octahedra rotation patterns in ABO3 perovskites is a powerful route to design functional materials. Here we propose a strategy that exploits point defects that create local electric dipoles and couple to the oxygen sublattice, enabling direct actuation on the rotational degrees of freedom. This approach, which relies on substituting an A site with a smaller ion, paves a way to couple dynamically octahedra rotations to external electric fields. A common antisite defect, AlLa, in rhombohedral LaAlO3 is taken as a prototype to validate the idea, with atomistic density functional theory calculations supported with an effective lattice model to simulate the dynamics of switching of the local rotational degrees of freedom to long distances. Our simulations provide an insight of the main parameters that govern the operation of the proposed mechanism, and allow to define guidelines for screening other systems where this approach could be used for tuning the properties of the host material., J.J., X.H., A.A., and M.P. acknowledge financial support from Grant No. PGC2018-096955-B-C43, funded by MCIN/AEI/10.13039/501100011033 and by ERDF, A way of making Europe, and Generalitat de Catalunya (Grant No. 2017SGR1506). We also acknowledge the European Union MaX Center of Excellence (EU-H2020 Grant No. 824143), and INTERSECT (H2020-NMBP-TO-IND Project GA No. 814487). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV- 2017-0706) and the CERCA Program of Generalitat de Catalunya. J.J. and G.H. acknowledge the financial support from PID2020-118479RB-I00 and Severo Ochoa FUNFUTURE (CEX2019-000917-S) projects of the Spanish Ministry of Science and Innovation (Grant No. MCIN/AEI/10.13039/501100011033). X.H. acknowledges financial support from F.R.S.-FNRS through the PDR Grants PROMOSPAN (Grant No. T.0107.20). J.J. acknowledges financial support from China Scholarship Council (CSC) with Grant No. 201904910557.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-collinear and asymmetric polar moments at back-gated SrTiO<inf>3</inf> interfaces

  • Lyzwa, Fryderyk
  • Pashkevich, Yurii G.
  • Marsik, Premysl
  • Sirenko, Andrei
  • Chan, Andrew
  • Mallett, Benjamin P.P.
  • Yazdi-Rizi, Meghdad
  • Xu, Bing
  • Vicente-Arche, Luis M.
  • Vaz, Diogo C.
  • Herranz, Gervasi
  • Cazayous, Maximilien
  • Hemme, Pierre
  • Fürsich, Katrin
  • Minola, Matteo
  • Keimer, Bernhard
  • Bibes, Manuel
  • Bernhard, Christian
The mechanism of the gate-field-induced metal-to-insulator transition of the electrons at the interface of SrTiO3 with LaAlO3 or AlOx is of great current interest. Here, we show with infrared ellipsometry and confocal Raman spectroscopy that an important role is played by a polar lattice distortion that is non-collinear, highly asymmetric and hysteretic with respect to the gate field. The anomalous behavior and the large lateral component of the underlying local electric field is explained in terms of the interplay between the oxygen vacancies, that tend to migrate and form extended clusters at the antiferrodistortive domain boundaries, and the interfacial electrons, which get trapped/detrapped at the oxygen vacancy clusters under a positive/negative gate bias. Our findings open new perspectives for the defect engineering of lateral devices with strongly enhanced and hysteretic local electric fields that can be manipulated with various parameters, like strain, temperature, or photons., F.L. and C.B. acknowledge enlightening discussions with S. Das, J. Maier, R. Merkle, A. Dubroka, and B. I. Shklovskii. Work at the University of Fribourg was supported by the Schweizerische Nationalfonds (SNF) by Grant No. 200020-172611. M.B. acknowledges support from the ERC Advanced grant n° 833973 “FRESCO” and the QUANTERA project “QUANTOX”. G.H. acknowledges financial support from Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) and Grant No. PID2020-118479RB-I00, and Generalitat de Catalunya (2017 400 SGR 1377)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MnTa2N4: A Ternary Nitride Spinel with a Strong Magnetic Frustration

  • Trócoli, Rafael
  • Frontera, Carlos
  • Oró, Judith
  • Ritter, Clemens
  • Alemany, Pere
  • Canadell, Enric
  • Palacín, M. Rosa
  • Fontcuberta, Josep
  • Fuertes, Amparo
Magnetic frustration results from competing magnetic interactions and leads to unusual ground states, ranging from non-collinear magnetic orders to spin liquids (SLs), opening the path to new physics and emerging properties. We report the engineered magnetic interaction design and synthesis of the new ternary nitride MnTa2N4 with a normal spinel structure, where the magnetic cations Mn2+ occupy exclusively the tetrahedral sites forming a diamond lattice. Although the magnetic interactions are strongly antiferromagnetic (θCW ≈ -140 K), a long-range magnetic order is not established, but a smooth magnetic anomaly is observed at T∗ ≈ 5.1 K, fingerprinting a large magnetic frustration. A short-range helicoidal magnetic order emerges at low temperatures. The ordered moment is ≈70% of the expected magnetic moment of Mn2+ ions and a large part (≈28%) of the spin entropy remains at 400 mK, signaling the coexistence of a helicoidal order with spin-glass-like or SL textures. First-principles calculations unveil an unexpected large direct Mn-Mn exchange interaction that balances the superexchange and accounts for the magnetic frustration. These findings open new avenues toward the design of quantum materials., This work was supported by the Ministerio de Ciencia e Innovación, Spain (PID2020-113805GB-I00, PID2020-118479RB-I00 (AEI/FEDER, EU), PGC2018-096955-B-C44 ,PGC2018-093863-B-C22, CEX2019-000917-S and MDM-2017-0767) and from Generalitat de Catalunya (2017SGR1377, 2017SGR581, 2017SGR1506, and 2017SGR1289). We thank Alba and ILL for beam time provision (experiments 2019023454 and 5-31-2713, respectively), Dr. François Fauth for assistance in data collection at Alba, and Dr. Bernat Bozzo (ICMAB-CSIC) for performing magnetic measurements. The authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A transversal approach to predict surface charge compensation in piezoelectric force microscopy

  • Tan, Huan
  • Lyu, Jike
  • Sheng, Yunwei
  • Machado, Pamela
  • Song, Tingfeng
  • Bhatnagar, Akash
  • Coll, Mariona
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Fina, Ignasi
Piezoelectric force microscopy (PFM) has demonstrated to be a powerful tool to characterize ferroelectric materials. However, extrinsic effects, most notably, those resulting from surface charges, often mask or mirror genuine piezoelectric response, challenging PFM data understanding. The contribution of surface charges to PFM signal is commonly compensated by using appropriate external bias voltage, which is ad-hoc selected and sample dependent. Here, we determine the compensating voltage in thin films of different ferroelectric materials and we compare with the corresponding I-V characteristics recorded using suitable electrodes. It turns out that the sign and magnitude of the bias voltage required to compensate the surface charges are related to the asymmetry of the I-V characteristics. We propose that this relation results from the fact that the semiconducting properties of the material determine both the I-V dependence, and the sign of charged adsorbates. We show how to make use of this correlation to predict the required compensation voltage of a non-ferroelectric material and we show that spurious piezoelectric-like contributions are largely cancelled. The results provide guidelines to mitigate common extrinsic contributions in PFM imaging., Financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033), through the Severo Ochoa FUNFUTURE (project CEX2019-000917-S funded by MCIN/AEI), project TED2021-130453B-C21 funded by MCIN/AEI and European Union NextGenerationEU/PRTR, and projects PID2020-118479RB-I00, PID2020-112548RB-I00, PID2020-114224RB-I00 and PID2019-107727RB-I00 funded by MCIN/AEI, and from CSIC through the i-LINK (LINKA20338) program are acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. HT, TS and YS are financially supported by China Scholarship Council (CSC) with No. 201906050014, 201807000104, and 201806410010. PM is financially supported by FPI fellowship PRE2018-084618. The work of HT, TS, PM and YS has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical characterization and extraction of activation energies of the defect states in the LaAlO3/SrTiO3 heterostructure

  • Lechaux, Yoann
  • Chen, Yu
  • Minj, Albert
  • Sánchez Barrera, Florencio
  • Herranz, Gervasi
  • Méchin, Laurence
  • Guillet, Bruno
In this work, we study the electronic properties of defects in the LaAlO3/SrTiO3 heterostructure, which is known to host a high mobility two-dimensional electron gas (2DEG) at the interface. This 2DEG also shows photoconductance, which could be related to defects that act as deep center trapping and releasing carriers by interaction with light. This phenomenon has raised an interest for the identification of deep energy levels in the LaAlO3/SrTiO3 heterostructure. We have studied the defect state properties using electrical characterization such as capacitance-voltage (C-V), current-voltage (I-V) measurements, and deep-level transient Fourier spectroscopy (DLTFS). From C-V and I-V analyses, a hysteresis was observed indicating an effect of mobile charges in the LaAlO3. Using DLTFS, we identify three defect states located at around 0.17 eV below conduction band and at 0.23 and 0.26 eV above the valence band. These defect states were attributed to defects in SrTiO3 such as strontium vacancies or titanium vacancies. We identify a fourth defect state having an energy of about 0.69 eV below the conduction band that could be related to oxygen vacancies in LaAlO3 or in SrTiO3. In addition, the observation of an effect of the electric field with DLTFS indicated that oxygen vacancies might be involved in Fowler-Nordheim or trap-assisted tunneling through the LaAlO3 layer., We acknowledge the financial support from the Spanish Ministry of Science and Innovation (No. MCIN/AEI/10.13039/501100011033) through the Severo Ochoa FUNFUTURE (Grant No. CEX2019-000917-S) and Grant Nos. PID2020-118479RB-I00 and PID2020-112548RB-I00, and by the European Regional Development Fund “A way of making Europe.”, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling electronic and thermal contributions to light-induced resistance switching in BaTiO3 ferroelectric tunnel junction

  • Long, Xiao
  • Tan, Huan
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
In the presence of asymmetric potential barriers, such as those created by imprint fields, ferroelectric polarization can be reversed by light due to the photoinduced suppression of polarization. Both thermal effects and photocarrier-induced polarization screening may agree with this experimental observation, challenging its understanding. Here, we explore light-induced ferroelectric polarization switching in BaTiO3 thin films. Time-dependent photocurrent and photoresistance experiments at different wavelengths indicate that the optical switch of polarization is mainly driven by photocarriers rather than thermal effects. The effect of light on sample polarization is found to be relatively slow and that an illumination period as long as ≈100 s is required to achieve complete switching when using a 405 nm light wavelength and 1.4 W/cm2 power density. It is shown that this response is governed by the concentration of photo-generated charges, which is low due to the reduced light absorption of BaTiO3 films at the explored wavelengths. Our conclusions can help us to better design optically switching devices based on ferroelectric materials., Financial support from the Spanish Ministry of Science and Innovation (No. 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (Project No.CEX2019-000917-S funded by MCIN/AEI), Project No. TED2021-130453B-C21 funded by MCIN/AEI and European Union NextGenerationEU/PRTR, and Project Nos. PID2020-118479RB-I00, PID2020-112548RB-I00, and PID2019-107727RB-I00 funded by MCIN/AEI, and from CSIC through the i-LINK (No. LINKA20338) program are acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. Xiao Long and Huan Tan are financially supported by the China Scholarship Council (CSC) under Grant Nos. 201806100207 and 201906050014. X.L. and H.T.’s work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectric Electroresistance after a Breakdown in Epitaxial Hf0.5Zr0.5O2 Tunnel Junctions

  • Long, Xiao
  • Tan, Huan
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
The recent discovery of ferroelectricity in doped HfO2 has opened perspectives on the development of memristors based on ferroelectric switching, including ferroelectric tunnel junctions. In these devices, conductive channels are formed in a similar manner to junctions based on nonferroelectric oxides. The formation of the conductive channels does not preclude the presence of ferroelectric switching, but little is known about the device ferroelectric properties after conduction path formation or their impact on the electric modulation of the resistance state. Here, we show that ferroelectricity and related sizable electroresistance are observed in pristine 4.6 nm epitaxial Hf0.5Zr0.5O2 (HZO) tunnel junctions grown on Si. After a soft breakdown induced by the application of suitable voltage, the resistance decreases by about five orders of magnitude, but signatures of ferroelectricity and electroresistance are still observed. Impedance spectroscopy allows us to conclude that the effective ferroelectric device area after the breakdown is reduced, most likely by the formation of conducting paths at the edge., Financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033) through the Severo Ochoa FUNFUTURE (No. CEX2019-000917-S); the TED2021-130453B-C21 (AEI/FEDER, EU), PID2020-118479RB-I00 (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects; from Generalitat de Catalunya through 2021 SGR 00445 and 2021 SGR 00804 projects; and from CSIC through the i-LINK (No. LINKA20338) program is acknowledged. X.L. and H.T. are financially supported by the China Scholarship Council (CSC) through No. 201806100207 and 201906050014. The work of X.L. and H.T. has been done as part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band Alignment and Photoresponse of LaFe O3 -Based Heterojunctions

  • Sheng, Yunwei
  • Mirjolet, Mathieu
  • Villa, Mario
  • Gázquez, Jaume
  • Santiso, José
  • Klein, Andreas
  • Fraxedas, J.
  • Fontcuberta, Josep
Epitaxial LaFeO3 (LFO)-based photocells, of different thicknesses (50-200 nm) have been grown on cubic LSAT (001) [(LaAlO3)0.3(Sr2TaAlO6)0.7] single-crystal substrates, using a La2/3Sr1/3MnO3 (LSMO) bottom electrode and different top electrodes [Pt,Ba0.95La0.05SnO3 (BLSO)], to determine their photoresponse. The measured short-circuit photocurrent first increases with LFO thickness and then decreases, and it is larger or smaller, when Pt or BLSO electrodes are used, respectively. The corresponding open-circuit voltage displays the opposite trend, being smaller or larger for Pt and BLSO, respectively, which is in excellent agreement with the electronic band alignments determined by x-ray photoelectron spectroscopy and also consistent with the rectifying character of the dark current-voltage data. It turns out that the films display a complex microstructure containing different variants, strained and relaxed, of the orthorhombic LaFeO3, that evolves with film thickness and entails the presence of strain gradients and, possibly, flexoelectric fields. We discuss these data and propose that the unavoidable grain boundaries between differently textured LaFeO3 crystallites play a significant role on the observed responsivity (2.6 × 10-4 A W-1), found to be larger than in related LFO-based structures., We are grateful to Dr Ignasi Fina for his advice when building the experimental setup. Financial support from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and the MAT2017-85232-R project, from the AEI/FEDER, UE (PID2020-118479RB-I00), and from Generalitat de Catalunya (2021 SGR 00445), is acknowledged. J.S. acknowledges support from Generalitat de Catalunya (2017 SGR 579 project) and AEI/FEDER, UE (PID2019-108573GB-C21). ICTS-CNME at UCM is acknowledged for offering access to STEM microscopy and expertise. ICN2 is funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program of MINECO (Grant No. SEV-2017-0706). The work of Y.S. and M.M. is done as a part of the corresponding Ph.D. programs in Materials Science and Physics of Universitat Autònoma de Barcelona. Y.S. is financially supported by China Scholarship Council (CSC), with No. 201806410010. M.M. is financially supported by the Spanish Ministry of Science, Innovation and Universities (BES-2015-075223)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust Antiferromagnetic FeRh Films on Mica

  • Quintana, Alberto
  • Zarco, Carlos
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
FeRh shows an antiferromagnetic to ferromagnetic phase transition above room temperature, which permits its use as an antiferromagnetic memory element. However, its antiferromagnetic order is sensitive to small variations in crystallinity and composition, challenging its integration into flexible devices. Here, we show that flexible FeRh films of high crystalline quality can be synthesized by using mica as a substrate, followed by a mechanical exfoliation of the mica. The magnetic and transport data indicate that the FeRh films display a sharp antiferromagnetic to ferromagnetic phase transition. Magnetotransport data allow for the observation of two distinguishable resistance states, which are written after a field-cooling procedure. It is shown that the memory states are robust under the application of magnetic fields of up to 10 kOe., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033) through the Severo Ochoa FUNFUTURE (No. CEX2019-000917-S); the TED2021-130453B-C21 (AEI/FEDER, EU), PID2020-118479RB-I00 (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects; from Generalitat de Catalunya through 2019 LLAV 00050, 2021 SGR 00445, and 2021 SGR 00804 projects. A.Q. acknowledges the Spanish Ministry of Science, Innovation, and Universities for the Juan de la Cierva Formación Contract (No. FJC2019-039780-I). The work of C.Z. has been done as part of his Bachelor’s Degree in Physics + Bachelor’s Degree in Chemistry at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced spin current transmissivity in Pt/ CoFe2 O4 bilayers with thermally induced interfacial magnetic modification

  • Gamino, Matheus
  • Oliveira, A. B.
  • Maior, D. S.
  • Ribeiro, Pablo R. T.
  • Machado, Fernando Luis de Araujo
  • Mori, Thiago J.A.
  • Correa, M. A.
  • Bohn, Felipe
  • Rodríguez-Suárez, R. L.
  • Fontcuberta, Josep
  • Rezende, Sergio. M.
We report on processes of generation of spin current and conversion into charge current in CoFe2O4/Pt bilayers by means of spin Hall magnetoresistance (SMR) and spin Seebeck effect (SSE) experiments. Specifically, we explore (001) full-textured CoFe2O4 (CFO) thin films grown onto (001)-oriented SrTiO3 substrates, covered with Pt layers deposited under two different conditions: one at room temperature and another at high temperature (400°C). The x-ray absorption spectroscopy measurements indicate that the Pt layer deposited at high temperature induces an interfacial magneticlike phase (Fe,Co)-Pt alloy, which influences the magnetic behavior of the structure and is responsible for the enhancement of the spin transmission at the interface. By analyzing the SMR data, we conclude that collinear and noncollinear magnetic domains coexist at the CFO-(Fe,Co)-Pt interface. By combining the data from the SMR and SSE measurements, we obtain the ratios between the values of the spin Hall angle (θSH) and between the ones of the spin-mixing conductance (geff↑↓) in the two samples. We demonstrate that while the value of θSH decreases by one-half with the heat treatment, the value of geff↑↓ increases by more than one order of magnitude. We interpret the increase of geff↑↓ in terms of unexpected magnetic reconstructions, which produce an enhancement of the magnetic moment arisen at the interface. Since the spin-mixing conductance determines the efficiency of the spin current transmission through the interface, the spinel ferrite cobalt in contact with a normal metal with a suitable heat treatment becomes a promising material for spintronics device applications., This research was supported in Brazil by Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), Financiadora de Estudos e Projetos (FINEP), Fundação de Amparo à Promoção da Ciência, Tecnologia e Inovação do Estado do Rio Grande do Norte (FAPERN), Fundação de Amparo à Ciência e Tecnologia do Estado de Pernambuco (FACEPE), and Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Grant No. 2022/04496-0; and in Chile by Fondo Nacional de Desarrollo Científico y Tecnológico (FONDECYT) Grant No. 1210641 and FONDEQUIP EQM180103. Ministerio de Ciencia, Universidades e Investigación (SPAIN) (Grants No. PID2020-118479RB-I00/AEI/10.13039/501100011033 and No. TED2021-129857B-I00. The authors acknowledge support of the INCT of Spintronics and Advanced Magnetic Nanostructures (INCT-SpinNanoMag), CNPq 406836/ 2022–1., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Temperature Synthesis of Ferromagnetic Eu3Ta3(O,N)9 with a Triple Perovskite Structure

  • Guarin, Jhonatan R.
  • Frontera, Carlos
  • Oró, Judith
  • Gàzquez, Jaume
  • Ritter, Clemens
  • Fontcuberta, Josep
  • Fuertes, Amparo
Europium tantalum perovskite oxynitrides were prepared by a new high-temperature solid-state synthesis under N2 or N2/H2 gas. The nitrogen stoichiometry was tuned from 0.63 to 1.78 atoms per Eu or Ta atom, starting with appropriate N/O ratios in the mixture of the reactants Eu2O3, EuN and Ta3N5, or Eu2O3 and TaON, which was treated at 1200 °C for 3 h. Two phases were isolated with compositions EuTaO2.37N0.63 and Eu3Ta3O3.66N5.34, showing different crystal structures and magnetic properties. Electron diffraction and Rietveld refinement of synchrotron radiation X-ray diffraction indicated that EuTaO2.37N0.63 is a simple perovskite with cubic Pm3̅m structure and cell parameter a = 4.02043(1) Å, whereas the new compound Eu3Ta3O3.66N5.34 is the first example of a triple perovskite oxynitride and shows space group P4/mmm with crystal parameters a = 3.99610(2), c = 11.96238(9) Å. The tripling of the c-axis in this phase is a consequence of the partial ordering of europium atoms with different charges in two A sites of the perovskite structure with relative ratio 2:1, where the formal oxidation states +3 and +2 are respectively dominant. Magnetic data provide evidence of ferromagnetic ordering developing at low temperatures in both oxynitrides, with saturation magnetization of about 6 μB and 3 μB per Eu ion for EuTaO2.37N0.63 and the triple perovskite Eu3Ta3O3.66N5.34 respectively, and corresponding Curie temperatures of about 7 and 3 K, which is in agreement with the lower proportion of Eu2+ in the latter compound., This work was supported by grants PID2020-113805GB-I00, PID2020-118479RB-I00, and CEX2019-000917-S funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación) and by “ERDF A way of making Europe” and European Union, and grant 2021SGR00439 funded by the Generalitat de Catalunya. It has been developed under the PhD program in Materials Science at the UAB. We thank ALBA synchrotron and Institut Laue-Langevin (experiment numbers AV-2021024982 and 5-23-748, respectively) for the provision of beam time; we also thank Dr. François Fauth (ALBA) for assistance during data collection and Dr. Bernat Bozzo (ICMAB-CSIC) for performing the magnetic measurements. JRG acknowledges AEAT predoctoral fellowship PRE2018-085204., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the superconducting performance of YBa2Cu3O7-δ films through field-induced oxygen doping

  • Alcalà, Jordi
  • Fernández Rodríguez, Alejandro
  • Günkel, Thomas
  • Barrera, Aleix
  • Cabero, Mariona
  • Gázquez, Jaume
  • Balcells, Lluis
  • Mestres, Narcís
  • Palau, Anna
The exploration of metal-insulator transitions to produce field-induced reversible resistive switching effects has been a longstanding pursuit in materials science. Although the resistive switching effect in strongly correlated oxides is often associated with the creation or annihilation of oxygen vacancies, the underlying mechanisms behind this phenomenon are complex and, in many cases, still not clear. This study focuses on the analysis of the superconducting performance of cuprate YBa2Cu3O7-δ (YBCO) devices switched to different resistive states through gate voltage pulses. The goal is to evaluate the effect of field-induced oxygen diffusion on the magnetic field and angular dependence of the critical current density and identify the role of induced defects in the switching performance. Transition electron microscopy measurements indicate that field-induced transition to high resistance states occurs through the generation of YBa2Cu4O7 (Y124) intergrowths with a large amount of oxygen vacancies, in agreement with the obtained critical current density dependences. These results have significant implications for better understanding the mechanisms of field-induced oxygen doping in cuprate superconductors and their role on the superconducting performance., The authors acknowledge financial support from Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033/ through the “Severo Ochoa” Programme for Centres of Excellence in CEX2019-000917-S, HTSUPERFUN PID2021-124680OB-I00 co-financed by ERDF A way of making Europe, the PID2020-118479RB-I00 (AEI/FEDER, EU) project and NANOLITO, RED2022-134096-T. The Catalan Government Grant 2021-SGR-00440 and the EU COST action SUPERQUMAP CA21144 are also acknowledged. We also acknowledge the Scientific Services at ICMAB, the SEM-FIB microscopy service of the Universidad de Málaga and the ICTS-CNME, for offering access to their instruments and expertise, and the UAB PhD program in Materials Science. AB and TG acknowledge support from MICIN Predoctoral Fellowship (PRE2019-09781) and AGAUR Catalan Government Predoctoral Fellowship (2022 FISDU 00115)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anionic and Magnetic Ordering in Rare Earth Tantalum Oxynitrides with an n = 1 Ruddlesden-Popper Structure

  • Guarín, Jhonatan R.
  • Frontera, Carlos
  • Oró, Judith
  • Colombel, Bastian
  • Ritter, Clemens
  • Fauth, François
  • Fontcuberta, Josep
  • Fuertes, Amparo
The new compounds R2TaO4-xNx with R = La, Ce, Nd, and Eu and 1.20 ≤ x ≤ 2.81 have been obtained by a solid-state reaction between metal nitrides and oxides or oxynitrides under N2 gas at temperatures between 1200 and 1700 °C. They are the first examples of rare earth transition metal oxynitrides with an n = 1 Ruddlesden-Popper structure and show different anion stoichiometries, crystal structures, and magnetic properties. Synchrotron X-ray powder diffraction and electron diffraction indicate that the lanthanum, cerium, and neodymium compounds crystallize in the orthorhombic space group Pccn, with cell parameters a = 5.72949(2), b = 5.73055(5), and c = 12.77917(6) Å for La2TaO1.31N2.69, a = 5.70500(5), b = 5.71182(4), and c = 12.61280(7) Å for Ce2TaO1.19N2.81, and a = 5.70466(3), b = 5.70476(5), and c = 12.32365(5) Å for Nd2TaO1.46N2.54. In contrast, Eu2TaO2.80N1.20 shows a tetragonal I41/acd superstructure doubling the c axis, with parameters a = 5.71867(2) and c = 25.00092(19) Å. Refinement of neutron powder diffraction data of Ce2TaO1.19N2.81 indicated the nitrogen order in the two equatorial positions of the tantalum octahedron, with refined N/O occupancies of 0.930(7)/0.070 and 0.876(13)/0.124, and the axial position is occupied by 50% of each anion. This anion ordering agrees with the distribution predicted by Pauling's second crystal rule. Magnetization measurements show that the cerium and europium compounds are ordered magnetically at low temperatures, while the neodymium compound remains paramagnetic down to 2 K, as a consequence of suppression of the effective magnetic moment of the latter when reducing the temperature., This work was supported by grants PID2020-113805GB-I00, PID2020-118479RB-I00, and CEX2019-000917-S funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación) and by “ERDF A way of making Europe” and European Union and grant 2021SGR00439 funded by the Generalitat de Catalunya. It has been developed under the PhD program in Materials Science of the UAB. The authors thank ALBA synchrotron and Institut Laue Langevin (Experiments numbers AV- 2022097011 and EASY1232 respectively) for the provision of beam time; the authors also thank Dr. Bernat Bozzo (ICMAB-CSIC) for performing the magnetic measurements. J.R.G. acknowledges the AEAT predoctoral fellowship PRE2018-085204. The authors acknowledge the assistance of ICMAB Scientific and Technological services: Laboratory of Low Temperature and Magnetism and Electron Microscopy., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stoichiometric control of electron mobility and 2D superconductivity at LaAlO3-SrTiO3 interfaces

  • Singh, Gyanendra
  • Guzmán, Roger
  • Saïz, Guilhem
  • Zhou, Wu
  • Gázquez, Jaume
  • Masoudinia, Fereshteh
  • Winkler, Dag
  • Claeson, Tord
  • Fraxedas, Jordi
  • Bergeal, Nicolas
  • Herranz, Gervasi
  • Kalaboukhov, Alexei
SrTiO3-based conducting interfaces, which exhibit coexistence of gate-tunable 2D superconductivity and strong Rashba spin-orbit coupling (RSOC), are candidates to host topological superconductive phases. Yet, superconductivity is usually in the dirty limit, which tends to suppress nonconventional pairing and therefore challenges these expectations. Here we report on LaAlO3/SrTiO3 (LAO/STO) interfaces with large mobility and mean free paths comparable to the superconducting coherence length, approaching the clean limit for superconductivity. We further show that the carrier density, mobility, and formation of the superconducting condensate are controlled by the fine-tuning of La/Al chemical ratio in the LAO film. We find a region in the superconducting phase diagram where the critical temperature is not suppressed below the Lifshitz transition, at odds with previous experimental investigations. These findings point out the relevance of achieving a clean-limit regime to enhance the observation of unconventional pairing mechanisms in these systems., The authors thank Kyle Shen and Jak Chakhalian for useful discussions. We acknowledge financial support from Projects No. PID2020-118479RB-I00, Severo Ochoa FUNFUTURE (No. CEX2019-000917-S) of the Spanish Ministry of Science and Innovation (Grant No.MCIN/AEI/10.13039/501100011033), project TED2021-129857B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR and financial support by the Generalitat de Catalunya (2021 SGR00445). We also acknowledge support from the Swedish infrastructure for micro- and nanofabrication - MyFab. G.S. acknowledges financial support from the Beatriu de Pinós Programme with research Grant No. 2019 BP 00207 from the Secretariat for Universities and Research of the Department of Business and Knowledge of the Generalitat de Catalunya, and the support of the Marie Sklodowska-Curie program COFUND (BP3, contract no. 801370) of the H2020 programme. N.B. acknowledge the funding received by the ANR PRC (QUANTOP), by the QuantERA ERA-NET Cofund in Quantum Technologies (Grant Agreement N. 731473) implemented within the European Union’s Horizon 2020 Program (QUANTOX), and by the French ANR PRC (SURIKAT ANR-23-CE30-0036). The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. R.G. & W.Z. acknowledge financial support from National Key RD Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitride tuning of magnetic frustration in the double Perovskite Ba2MnWO6

  • Oró, Judith
  • Frontera, Carlos
  • Guarín, Jhonatan R.
  • Gázquez, Jaume
  • Mundet, Bernat
  • Ritter, Clemens
  • Fontcuberta, Josep
  • Fuertes, Amparo
Published as part of Chemistry of Materials special issue “In Memory of Prof. Francis DiSalvo”., The new double perovskite oxynitride Ba2MnWO4.42N1.58 has been obtained by topochemical ammonolysis at 700 °C of B-site ordered Ba2MnWO6 using a high NH3 flow rate of 600 cm3/min. The relatively low synthesis temperature hinders the cation mobility, allowing the order of Mn and W cations of the precursor oxide to be unperturbed in the oxynitride. Synchrotron X-ray diffraction, electron diffraction, and neutron diffraction indicate that Ba2MnWO4.42N1.58 crystallizes in the Fm3̅m space group with a larger parameter of 8.2434(5) Å compared to Ba2MnWO6 [8.20337(1) Å]. Magnetic susceptibility measurements show that Ba2MnWO4.42N1.58 orders antiferromagnetically below TN = 3.8 K, and the observed Curie–Weiss temperature θCW = −70(3) K indicates a frustrated Mn lattice with frustration parameter f = |θCW|/TN ≈ 18, which is significantly larger than for the oxide (f ≈ 7.2). The substitution of oxide by the nitride anion induces the oxidation of Mn2+ to Mn3+/4+ and a subsequent decrease of the paramagnetic effective moment from 6.28 to 5.16 μB/f.u. The observation in the oxynitride of a frustration parameter which is larger than twice that of the oxide precursor is rationalized as caused by the relative enhancement of the nearest neighbors’ magnetic interactions (J1) Mn–(O/N)–(O/N)–Mn at 90°, compared to next-nearest neighbors’ interactions at 180° (J2) Mn–(O/N)–W–(O/N)–Mn, due to the smaller electronegativity of nitrogen compared to oxygen that increases the covalency of bonding. These results expand the chemical and structural diversity of complex transition metal oxynitrides and provide a new route to tailor spin frustration in transition metal double perovskites., This work was supported by grants PID2020-113805GB-I00, PID2020-118479RB-I00, CEX2023-001263 S, and PRTR-C17.I1 funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación) and by “ERDF A way of making Europe” and European Union, and grant 2021SGR00439 funded by the Generalitat de Catalunya. It has been developed under the PhD program in Materials Science of the UAB. We thank ALBA synchrotron and Institut Laue Langevin (Experiments numbers AV- 2022025729 and 5-23-789, respectively) for the provision of beam time; we also thank Dr. François Fauth (ALBA) for assistance during data collection and Dr. Bernat Bozzo (ICMAB-CSIC) for performing the magnetic measurements. JRG acknowledges AEAT predoctoral fellowship PRE2018-085204. We thank the assistance of ICMAB Scientific and Technological services of X-ray Diffraction, Low Temperature, and Magnetism and Electron Microscopy. We acknowledge the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 from the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grain boundaries and the photoresponse of epitaxial LaFe O3 films

  • Villa, Mario
  • Luca, Gabriele de
  • Sheng, Yunwei
  • Plana-Ruíz, S.
  • Santiso, José
  • Fontcuberta, Josep
  • Gázquez, Jaume
Centrosymmetric LaFeO3 (LFO) shows a photovoltaic effect when sandwiched between asymmetric electrodes, which stems from the built-in potential induced by the different work functions of the top and bottom electrodes, interfacial polar discontinuity, or even flexoelectric fields. However, the complex microstructure of epitaxial LFO film contributes to its photoresponse differently depending on the crystallographic domain landscape and the nature of the grain boundaries originating between them. In this work, to minimize the presence of strain gradients and isolate the substrate-induced lattice mismatch effects on microstructure and photoresponse, ultrathin (10 nm) LFO films are grown on substrates with different compressive and tensile in-plane strain. Structural characterization allows us to disentangle the contributions of the domain distribution and strain state to the measured photocurrent of the LFO films. Four-dimensional scanning transmission electron microscopy orientation mapping proves a strong correlation between the strain imposed by the substrate, the LFO domain distribution, and the photocurrent performance. Films grown on substrates imposing a compressive strain [SrTiO3 (STO) (001), (LaAlO3)0.3(Sr2TaAlO6)0.7(001), and LaAlO3(001)] exhibit predominantly twin boundaries with low disorder, whereas films grown on substrates imposing tensile strain (DyScO3 (DSO) (110)) display grain boundaries formed by crystallites with orthogonal c-axis orientations, which we hypothesize are associated with the observed enhanced photocurrent. Further validation is provided by LFO films grown on STO(110), where controlled grain boundary formation replicates the crystallite texture observed in films grown on DSO(110) and concomitantly show a large short-circuit photocurrent (JSC ≈ 50 mA/cm2). This work highlights grain boundary engineering as a strategy for optimizing the photoelectronic properties of oxide thin films, as well as an experimental approach applicable to other orthorhombic Pbnm systems to investigate the performance of perovskite-based optoelectronic devices through crystallographic domain configurations., The authors acknowledge financial support from Projects No. PID2023-152225NB-I00 and No. PID2020-118479RB-I00 and Severo Ochoa MATRANS42 (Project No. CEX2023-001263-S) of the Spanish Ministry of Science, Innovation and Universities/AEI (Grant No. MICIU/AEI/10.13039/501100011033 and the European Regional Development Fund of the European Union). G.D.L. acknowledges Grant No. RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/Plan de Recuperación, Transformación y Resiliencia. J.S. acknowledges the support of the Severo Ochoa program from the Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and the CERCA program (Generalitat de Catalunya), as well as the European Union for funding through project H2020-MSCA-RISE-2014 reference 645658. EM02-METCAM at ALBA and ICTS-CNME at Universidad Complutense de Madrid are acknowledged for providing access to STEM and expertise. The authors acknowledge the TEM facilities of the Scientific & Technical Resources Service (SRCiT) of Universitat Rovira i Virgili, where the TEM was partially funded by the operative program FEDER Catalunya 2014-2020 (IU16-015844)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable wafer-scale integration of epitaxial ZnO on silicon for piezoelectric devices

  • Sanchez-Fuentes, David
  • Garcia Bermejo, Ricardo
  • Magén, César
  • Carretero Genevrier, Adrian
Adrian Carretero-Genevrier: et al., To sustainably support the ongoing energetic transition, we need metal oxides capable of converting energy and produce sensing devices. However, these materials suffer from a high economic cost of manufacturing, and their production in a sustainable way is, to date, a milestone. Additionally, the technical challenges, such as scalability and integration on silicon for industrial processing using microelectronic technologies, impose strict conditions for the entire materials process. In this work, we engineer α-quartz virtual substrates up to 4 inches, facilitating the large-scale and sustainable integration of epitaxial ZnO microwire films on silicon. These materials are manufactured on silicon by using solution chemistry, providing single-chip solutions that can meet strict economic constraints for developing sustainable devices at a lower cost. Through this integrative technology, we demonstrate the microfabrication of epitaxial (110)ZnO/(100)α-quartz/(100)silicon piezoelectric membrane resonators at the wafer scale with potential applications in energy conversion and sensing. We combined four-dimensional (4D) STEM diffraction and piezoelectric force microscopy (PFM) to establish a correlation between out-of-plane crystalline strain and piezoelectric response in epitaxial (110)ZnO at the microscale. Finally, we proved the fabrication of 800 nm thick (110)ZnO suspended membranes that can be transferred to flexible substrates, making them suitable for flexible devices., This project received funding from the European Research Council (ERC) through the European Union’s Horizon 2020 program (project SENSiSOFT No. 803004). We also thank Project No. PID2020-118479RBI00 and PID2023-147211OB-C22 for their financial support. Frederic Pichot provided valuable expertise and advice during the membrane lithography processes at the CTM platform, and we appreciate his help. The U.S. Department of Energy’s Office of Science, Materials Sciences and Engineering Division supported the electron microscopy work at ORNL. The Institut des Matériaux de Paris Centre (IMPC FR2482) facilitated the FEGSEM instrumentation, with funding from Sorbonne Université, CNRS, and the C’Nano projects of the Île-de-France region. We also thank David Montero for taking the FEGSEM images. We would like to thank Mariana Trifonova for preparing the TEM lamellae, as well as the Scientific and Technical Resources Service at Rovira i Virgili University. The microscopy work was done at the Center for Nanophase Materials Sciences, a facility supported by the DOE Office of Science., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stoichiometric control of electron mobility and 2D superconductivity at LaAlO3-SrTiO3 interfaces

  • Singh, Gyanendra|||0000-0002-7502-9241
  • Guzmán Aluja, Roger|||0000-0002-5580-0043
  • Saïz, Guilhem
  • Zhou, Wu|||0000-0002-6803-1095
  • Gázquez Alabart, Jaume|||0000-0002-2561-328X
  • Masoudinia, Fereshteh
  • Winkler, Dag|||0000-0001-8332-3742
  • Claeson, Tord
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Bergeal, Nicolas|||0000-0002-9016-5305
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Kalaboukhov, Alexei
SrTiO-based conducting interfaces, which exhibit coexistence of gate-tunable 2D superconductivity and strong Rashba spin-orbit coupling (RSOC), are candidates to host topological superconductive phases. Yet, superconductivity is usually in the dirty limit, which tends to suppress nonconventional pairing and therefore challenges these expectations. Here we report on LaAlO/SrTiO (LAO/STO) interfaces with large mobility and mean free paths comparable to the superconducting coherence length, approaching the clean limit for superconductivity. We further show that the carrier density, mobility, and formation of the superconducting condensate are controlled by the fine-tuning of La/Al chemical ratio in the LAO film. We find a region in the superconducting phase diagram where the critical temperature is not suppressed below the Lifshitz transition, at odds with previous experimental investigations. These findings point out the relevance of achieving a clean-limit regime to enhance the observation of unconventional pairing mechanisms in these systems.