Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 44
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Single-molecule transport of fullerene-based curcuminoids

  • Dulić, Diana
  • Rates, Alfredo
  • Castro, Edison
  • Labra-Muñoz, Jacqueline
  • Aravena Ponce, Daniel Alejandro
  • Etcheverry-Berrios, Alvaro
  • Riba López, Daniel
  • Ruiz Sabín, Eliseo
  • Aliaga-Alcalde, Núria
  • Soler, Mònica
  • Echegoyen, Luis
  • van der Zant, Herre S. J.
We present experimental and theoretical studies of single-molecule conductance through nonplanar fullerocurcuminoid molecular dyads in ambient conditions using the mechanically controllable break junction technique. We show that molecular dyads with bare fullerenes form configurations with conductance features related to different transport channels within the molecules, as identified with filtering and clustering methods. The primary channel corresponds to charge transport through the methylthio-terminated backbone. Additional low-conductance channels involve one backbone side and the fullerene. In fullerenes with four additional equatorial diethyl malonate groups attached to them, the latter transport pathway is blocked. Density functional theory calculations corroborate the experimental observations. In combination with nonequilibrium green functions, the conductance values of the fullerocurcuminoid backbones are found to be similar to those of a planar curcuminoid molecule without a fullerene attached. In the nonplanar fullerocurcuminoid systems, the highest-conductance peak occurs partly through space, compensating for the charge delocalization loss present in the curcuminoid system.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-Engineered Ferromagnetism in LaMnO3 Thin Films

  • Roqueta, Jaume
  • Pomar, Alberto
  • Balcells Argemi, Lluis
  • Frontera, Carlos
  • Valencia, Sergio
  • Abrudan, Radu
  • Bozzo Closas, Bernat
  • Konstantinović, Z.
  • Santiso, José
  • Martínez Perea, Benjamín
A systematic study of the growth process of LaMnO3 (LMO) thin films, by pulsed laser deposition, on top of SrTiO3 substrates under different oxygen partial pressures (PO2) is reported. It is found that the accommodation of the orthorhombic LMO phase onto the cubic STO structure, i.e. the amount of structural strain, is controlled by background oxygen pressure. We demonstrate that magnetic behaviour can be continuously tuned from robust ferromagnetic (FM) ordering to an antiferromagnet. These results strongly point to a strain-induced selective orbital occupancy as the origin of the observed FM behaviour, in agreement with recent theoretical calculations., We acknowledge financial support from the Spanish MINECO (MAT2011-29081 and MAT2012-33207), CONSOLIDER (CSD2007-00041), and FEDER program. We thank P. García for his kind assistance during x-ray experiments. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant - SEV 2013-0295). ZK thanks the support from the Ministry of Education, Science, and Technological Development of Republic of Serbia through Project III45018., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-arranged misfit dislocation network formation upon strain release in La0.7Sr0.3MnO3/LaAlO3(100) epitaxial films under compressive strain

  • Santiso, José
  • Roqueta, Jaume
  • Bagués, Núria
  • Frontera, Carlos
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Pomar, Alberto
  • Balcells, Lluis
  • Sandiumenge, Felip
Santiso, José et al., Lattice-mismatched epitaxial films of LaSrMnO (LSMO) on LaAlO (001) substrates develop a crossed pattern of misfit dislocations above a critical thickness of 2.5 nm. Upon film thickness increases, the dislocation density progressively increases, and the dislocation spacing distribution becomes narrower. At a film thickness of 7.0 nm, the misfit dislocation density is close to the saturation for full relaxation. The misfit dislocation arrangement produces a 2D lateral periodic structure modulation (Λ≈ 16 nm) alternating two differentiated phases: one phase fully coherent with the substrate and a fully relaxed phase. This modulation is confined to the interface region between film and substrate. This phase separation is clearly identified by X-ray diffraction and further proven in the macroscopic resistivity measurements as a combination of two transition temperatures (with low and high T). Films thicker than 7.0 nm show progressive relaxation, and their macroscopic resistivity becomes similar than that of the bulk material. Therefore, this study identifies the growth conditions and thickness ranges that facilitate the formation of laterally modulated nanocomposites with functional properties notably different from those of fully coherent or fully relaxed material., This research was funded by the Spanish MINECO (projects: MAT2011-29081-C02, MAT2012-33207 and MAT2013-47869-C4-1-P, Consolider-Ingenio CSD2008-00023) and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658. We also acknowledge financial aid from the Generalitat de Catalunya (2014 SGR 501 and 2014 SGR 1216). J. S. thanks the support of Ministry of Education and Science through program “Salvador de Madariaga” for a grant (ref: PRX14/00297) to perform a stay at MIT. Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project III45018. Q.L. and B.Y. thank the National Science Foundation for support through the MIT Center of Materials Science and Engineering MRSEC under grant no. DMR-1419807. This work made use of the Shared Experimental Facilities supported in part by the MRSEC Program of the National Science Foundation under award number DMR – 1419807. We thank Dr. Belén Ballesteros (ICN2, Barcelona) and Prof. Marie-Jo Casanova (CEMES, Toulouse) for their assistance with transmission electron microscopy experiments. We are grateful to J. Rubio-Zuazo and the ESRF for providing assistance in using beamline BM25. We also thank HZB for the allocation of synchrotron radiation beamtime at Bessy., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of self-organized Mn3O4 nanoinclusions in LaMnO3 films

  • Pomar, Alberto
  • Konstantinović, Z.
  • Bagués, Núria
  • Roqueta, Jaume
  • López Mir, Laura
  • Balcells, Lluis
  • Frontera, Carlos
  • Mestres, Narcís
  • Sandiumenge, Felip
  • Martínez Perea, Benjamín
  • Santiso, José
et al., We present a single-step route to generate ordered nanocomposite thin films of secondary phase inclusions (Mn3O4) in a pristine perovskite matrix (LaMnO3) by taking advantage of the complex phase diagram of manganese oxides. We observed that in samples grown under vacuum growth conditions from a single LaMnO3 stoichiometric target by Pulsed Laser Deposition, the most favorable mechanism to accommodate Mn2+ cations is the spontaneous segregation of self-assembled wedge-like Mn3O4 ferrimagnetic inclusions inside a LaMnO3 matrix that still preserves its orthorhombic structure and its antiferromagnetic bulk-like behavior. A detailed analysis on the formation of the self-assembled nanocomposite films evidences that Mn3O4 inclusions exhibit an epitaxial relationship with the surrounding matrix that it may be explained in terms of a distorted cubic spinel with slight (~9°) c-axis tilting. Furthermore, a Ruddlesden-Popper La2MnO4 phase, helping to the stoichiometry balance, has been identified close to the interface with the substrate. We show that ferrimagnetic Mn3O4 columns influence the magnetic and transport properties of the nanocomposite by increasing its coercive field and by creating local areas with enhanced conductivity in the vicinity of the inclusions., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence in R&D (SEV-2015-0496 and SEV 2013-0295), Projects MAT2011-29081 and MAT2015-71664-R and Ministry of Education and Science of Serbia (Grant—III45018) is acknowledged. This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). NB thanks the Spanish MINECO for financial support through the FPI program., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Step Route to Iron Oxide Hollow Nanocuboids by Cluster Condensation: Implementation in Water Remediation Technology

  • Balcells, Lluis
  • Martínez Boubeta, Carlos
  • Cisneros Fernández, José
  • Simeonidis, Konstantinos
  • Bozzo, Bernat
  • Oró, Judith
  • Bagués, Núria
  • Arbiol, Jordi
  • Mestres, Narcís
  • Martínez Perea, Benjamín
The fabrication procedure of hollow iron oxide nanoparticles with a large surface to volume ratio by a single-step gas condensation process at ambient temperature is presented. Fe clusters formed during the sputtering process are progressively transformed into hollow cuboids with oxide shells by the Kirkendall mechanism at the expense of oxygen captured inside the deposition chamber. TEM and Raman spectroscopy techniques point to magnetite as the main component of the nanocuboids; however, the magnetic behavior exhibited by the samples suggests the presence of FeO as well. In addition, these particles showed strong stability after several months of exposure to ambient conditions, making them of potential interest in diverse technological applications. In particular, these hierarchical hollow particles turned out to be very efficient for both As(III) and As(V) absorption (326 and 190 mg/g, respectively), thus making them of strong interest for drinking water remediation., We kindly acknowledge the assistance of Guillaume Sauthier, from ICN2, for helping us with valuable X-ray photoelectron investigations. Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence in R&D (SEV- 2015-0496), MAT2015-71664-R, FEDER, and funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) is acknowledged. N.B. thanks the Spanish MINECO for financial support through the FPI program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Misfit dislocation guided topographic and conduction patterning in complex oxide epitaxial thin films

  • Sandiumenge, Felip
  • Bagués, Núria
  • Santiso, José
  • Paradinas, Markos
  • Pomar, Alberto
  • Konstantinović, Z.
  • Ocal, Carmen
  • Balcells, Lluis
  • Casanove, Marie-Jo
  • Martínez Perea, Benjamín
Interfacial dissimilarity has emerged in recent years as the cornerstone of emergent interfacial phenomena, while enabling the control of electrical transport and magnetic behavior of complex oxide epitaxial films. As a step further toward the lateral miniaturization of functional nanostructures, this work uncovers the role of misfit dislocations in creating periodic surface strain patterns that can be efficiently used to control the spatial modulation of mass transport phenomena and bandwidth-dependent properties on a ≈20 nm length scale. The spontaneous formation of surface strain-relief patterns in La0.7Sr0.3MnO3/LaAlO3 films results in lateral periodic modulations of the surface chemical potential and tetragonal distortion, controlling the spatial distribution of preferential nucleation sites and the bandwidth of the epilayer, respectively. These results provide insights into the spontaneous formation of strain-driven ordered surface patterns, topographic and functional, during the growth of complex oxide heterostructures on lengths scales far below the limits achievable through top-down approaches., The authors thank Dr. Belén Ballesteros for her assistance with electron microscopy experiments. This research was sponsored by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D: SEV- 2015-0496, MAT2015-71664-R, FEDER program, MAT2012-33207, and MAT2013-47869-C4-1-P), and the European Union Horizon 2020 research and innovation program under the Marie Sklodowska–Curie grant agreement No. 645658. The authors also acknowledge fi nancial aid from the Generalitat de Catalunya (2014 SGR 501). N.B. and F.S. also acknowledge funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative I3) for providing access to aberration corrected electron microscope at CEMES (Toulouse). N.B. thanks the Spanish MINECO for fi nancial support through the FPI program. F.S. acknowledges support from the Labex (Excellence Laboratory) NEXT for a visiting scientist fellowship at CEMES (Toulouse, France). Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project III45018., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiscale approach to the study of the electronic properties of two thiophene curcuminoid molecules

  • Etcheverry Berríos, Álvaro
  • Diaz Torres, Raul
  • Zant, Herre S. J. van der
  • Aliaga Alcalde, Nuria
  • Soler Jaumá, Mónica
et al., We studied the electronic and conductance properties of two thiophene–curcuminoid molecules, 2-thphCCM (1) and 3-thphCCM (2), in which the only structural difference is the position of the sulfur atoms in the thiophene terminal groups. We used electrochemical techniques as well as UV/Vis absorption studies to obtain the values of the HOMO–LUMO band gap energies, showing that molecule 1 has lower values than 2. Theoretical calculations show the same trend. Self-assembled monolayers (SAMs) of these molecules were studied by using electrochemistry, showing that the interaction with gold reduces drastically the HOMO–LUMO gap in both molecules to almost the same value. Single-molecule conductance measurements show that molecule 2 has two different conductance values, whereas molecule 1 exhibits only one. Based on theoretical calculations, we conclude that the lowest conductance value, similar in both molecules, corresponds to a van der Waals interaction between the thiophene ring and the electrodes. The one order of magnitude higher conductance value for molecule 2 corresponds to a coordinate (dative covalent) interaction between the sulfur atoms and the gold electrodes., This work has been funded by the FONDECYT REGULAR grants 1110206,1140770, and 1140199, PAI-CONICYT 79150041, Conicyt PFCHA 21140734, ANILLO project Act 1117, Millenium Project RC120001, the Dutch funding agencies FOM and NWO/OCW, by the EU through a RISE (DAFNEOX) project, SEP-210165479 by the MICINN of Spain (projects CTQ2012-32247 and MAT2013-47869- C4-2-P). N.A.-A. and R.D.-T. also acknowledge financial support from MINECO through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge transport through a single molecule of trans-1-bis-diazofluorene [60]fullerene

  • Stefani, Davide
  • Soler Jaumá, Mónica
  • Zant, Herre S. J. van der
  • Dulić, Diana
et al., Fullerenes have attracted interest for their possible applications in various electronic, biological, and optoelectronic devices. However, for efficient use in such devices, a suitable anchoring group has to be employed that forms well-defined and stable contacts with the electrodes. In this work, we propose a novel fullerene tetramalonate derivate functionalized with trans-1 4,5-diazafluorene anchoring groups. The conductance of single-molecule junctions, investigated in two different setups with the mechanically controlled break junction technique, reveals the formation of molecular junctions at three conductance levels. We attribute the conductance peaks to three binding modes of the anchoring groups to the gold electrodes. Density functional theory calculations confirm the existence of multiple binding configurations and calculated transmission functions are consistent with experimentally determined conductance values., The work at TUDelft was supported by the EU through an advanced ERC grant (Mols@Mols); device fabrication was done at the Kavli Nanolab at Delft. The work at University of Chile was supported by Fondecyt Regular Project 1161775 (M.S. and J.L.M.), Fondecyt Regular Project 1140770, EU RISE (DAFNEOX) project SEP-210165479 (D.D.), and CONICYT/Fondecyt Postdoctoral Project 3150674 (C.G.C.). D.A. thanks CONICYT + PAI ‘Concurso nacional de apoyo al retorno de investigadores/as desde el extranjero, convocatoria 2014 82140014’ for financial support. Powered@NLHPC: This research was partially supported by the supercomputing infrastructure of the NLHPC (ECM-02). L.E. thanks the National Science Foundation [grant CHE-1408865] and the PREM Program [grant DMR-1205302] as well as the Robert A. Welch Foundation [grant AH-0033] for generous financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembled line network in BiFeO3 thin films

  • Colson, Baptiste
  • Fuentes, Víctor
  • Konstantinović, Z.
  • Colson,D.
  • Forget, A.
  • Lazarević, Nenad
  • Šćepanović, M.
  • Popović, Z. V.
  • Frontera, Carlos
  • Balcells, Lluis
  • Martínez Perea, Benjamín
  • Pomar, Alberto
In this work we report on the controlled fabrication of a self-assembled line network in highly epitaxial BiFeO3 thin films on top of LaAlO3 in the kinetically limited grown region by RF sputtering. As previously shown in the case of manganite thin films, the remarkable degree of ordering is achieved using vicinal substrates with well-defined step-terrace morphology. Nanostructured BiFeO3 thin films show mixed-phase morphology. Besides typical formation following (100) and (010) axes, some mixed phase nanodomains are detected also in-between the regular line network. These particular microstructures open a playground for future applications in multiferroic nanomaterials., This work has received funding from the European Union’s Horizon 2020 research and innovation under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). A.P., V. F. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments. E. P.-M. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496), and project MAT2015-71664 and SPINCURIOX (RTI2018-099960-B-I00). N. L., M. S., Z. K. and Z.V.P. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No III45018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An in operando study of chemical expansion and oxygen surface exchange rates in epitaxial GdBaCo2O5.5 electrodes in a solid-state electrochemical cell by time-resolved X-ray diffraction

  • Chatterjee, Arindom
  • Caicedo, José Manuel
  • Ballesteros, Belén
  • Santiso, José
This report explores the fundamental characteristics of epitaxial thin films of a mixed ionic electronic conducting GdBaCo2O5.5±δ (GBCO) material with a layered perovskite structure, relevant for use as an active electrode for the oxygen reduction and evolution reactions in electrochemical devices. Time-resolved X-ray diffraction in combination with voltage step chrono-amperometric measurements in a solid state electrochemical cell provides a deeper insight into the chemical expansion mechanism in the GBCO electrode. The chemical expansion coefficient along the c-axis, αc, shows a negative value upon the compound oxidation contrary to standard perovskite materials with disordered oxygen vacancies. Chemical expansion also shows a remarkable asymmetry from αc = −0.037 to −0.014 at δ < 0 and δ > 0, respectively. This change in chemical expansion is an indication of a different mechanism of the structural changes associated with the variable Co cation oxidation state from Co2+ → Co3+ → Co4+. Since redox reactions are dominated by oxygen surface exchange between the GBCO electrode and gas atmosphere, monitoring the time response of the structural changes allows for direct determination of oxygen reduction and evolution reaction kinetics. The reaction kinetics are progressively slowed down upon reduction in the δ < 0 oxygen stoichiometry region, while they maintain a high catalytic activity in the δ > 0 region, in agreement with the structural changes and the electronic carrier delocalization when crossing δ = 0. This work validates the time-resolved XRD technique for fast and reversible measurements of electrode activity in a wide range of oxygen non-stoichiometry in a solid-state electrochemical cell operating under realistic working conditions., The authors acknowledge the support from projects: MINECO ref. MAT2016-77100-C2-1-P; CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295). A. C. particularly acknowledges the support of Severo Ochoa programme for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

De-embedding zero-field signal in high-frequency magneto-impedance measurements of soft ferromagnetic materials

  • Kilinc, M.
  • García García, Carlos
  • Eginligil, M.
  • Wang, J.
  • Huang, W.
Devices based on soft ferromagnetic materials are promising for high-frequency flexible electronics. Especially, wide-range tunable ferromagnetic resonance response of ferromagnetic microwires and ribbons can be functionalized in the form of magneto-impedance sensors in stretchable, bendable and twistable environments. A vector network analyzer calibrated by standard techniques is required to characterize the high-frequency properties of such devices. However, most of the calibration techniques necessitate calculations, computer simulations, and/or fabricating calibration kits in the shape of various test fixtures. Here, we employ a fixture calibration method for high-frequency (up to 4 GHz) impedance measurements of CoFeSiB microwires and melt-spun ribbons taking zero applied magnetic field as the reference. This method is based on a virtual de-embedding procedure, in which a reference signal is subtracted from all the subsequent measurements, which reduces the time for the total calibration procedure down to few minutes. Applications of the method are not limited to the cases where applied magnetic field varies. Any external parameter (strain, temperature, pressure etc.) that can change the impedance is allowed by this method., This work is supported in part by the “Six Talent Peaks Project” in Jiangsu Province (XYDXX-022), the 100 Foreign Talents Project in Jiangsu Province (JSA2016003), Primary Research & Development Plan of Jiangsu Province (BE2016770), the National Natural Science Foundation of China (11774170), the Major Research Plan of the National Natural Science Foundation of China (91733302), the Joint Research Program between China and European Union (2016YFE0112000), the National Science Fund for Distinguished Young Scholars (61725502), and Fundamental Studies of Perovskite Solar Cells (2015CB932200). C. Garcia acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and from Proyecto Basal FB 0821., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Misfit Dislocation Core Phase in Complex Oxide Heteroepitaxy

  • Bagués, Núria
  • Santiso, José
  • Esser, Bryan D.
  • Williams, Robert E.A.
  • McComb, Dave W.
  • Konstantinović, Z.
  • Balcells, Lluis
  • Sandiumenge, Felip
Misfit dislocations form self‐organized nanoscale linear defects exhibiting their own distinct structural, chemical, and physical properties which, particularly in complex oxides, hold a strong potential for the development of nanodevices. However, the transformation of such defects from passive into potentially active functional elements necessitates a deep understanding of the particular mechanisms governing their formation. Here, different atomic resolution imaging and spectroscopic techniques are combined to determine the complex structure of misfit dislocations in the perovskite type La0.67Sr0.33MnO3/LaAlO3 heteroepitaxial system. It is found that while the position of the film–substrate interface is blurred by cation intermixing, oxygen vacancies selectively accumulate at the tensile region of the dislocation strain field. Such accumulation of vacancies is accompanied by the reduction of manganese cations in the same area, inducing chemical expansion effects, which partly accommodate the dislocation strain. The formation of oxygen vacancies is only partially electrically compensated and results in a positive net charge q ≈ +0.3 ± 0.1 localized in the tensile region of the dislocation, while the compressive region remains neutral. The results highlight a prototypical core model for perovskite‐based heteroepitaxial systems and offer insights for predictive manipulation of misfit dislocation properties., The authors thank Dr. Belén Ballesteros for her assistance in TEM experiments with the FEI Tecnai F20 S/TEM microscope. This research was funded by the Spanish MINECO through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and MAT2015‐71664‐R, and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska‐Curie Grant Agreement No. 645658. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2013‐0295) and by the CERCA Programme (Generalitat de Catalunya). The authors also acknowledge financial aid from the Generalitat de Catalunya (2014 SGR 501 and 2014 SGR 1216). N.B. thanks the Spanish MINECO for the financial support through the FPI program. Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project No. III45018. B.D.E. and D.W.M. acknowledge support from the Center for Emergent Materials at the Ohio State University, a National Science Foundation Materials Research Science and Engineering Center (Grant No. DMR‐1420451)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous cationic ordering in chemicalsolution- grown La2CoMnO6 double perovskite thin films

  • Wang, Hailin
  • Gázquez, Jaume
  • Frontera, Carlos
  • Chisholm, Matthew F.
  • Pomar, Alberto
  • Martínez Perea, Benjamín
  • Mestres, Narcís
Double perovskite oxides are of interest because of their electric, magnetic, and elastic properties; however, these properties are strongly dependent on the ordered arrangement of cations in the double perovskite structure. Therefore, many efforts have been made to improve the level of cationic ordering to obtain optimal properties while suppressing antisite defect formation. Here, epitaxial double perovskite La2CoMnO6 thin films were grown on top of (001)-STO oriented substrates by a polymer-assisted deposition chemical solution approach. Confirmation of the achievement of full Co/Mn cationic ordering was found by scanning transmission electron microscopy (STEM) measurements; EELS maps indicated the ordered occupancy of B–B′ sites by Co/Mn cations. As a result, optimal magnetic properties (Msat ≈ 6 µB/f.u. and Tc ≈ 230 K) are obtained. We show that the slow growth rates that occur close to thermodynamic equilibrium conditions in chemical solution methods represent an advantageous alternative to physical deposition methods for the preparation of oxide thin films in which complex cationic ordering is involved., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), COACHSUPENERGY project (MAT2014-51778-C2-1-R) and MAT2015-71664-R, cofinanced by the European Regional Development Fund. Support from the European Union′s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 645658 (DAFNEOX Project) is also acknowledged. H.W. acknowledges financial support from the China Scholarship Council (CSC). J.G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The STEM–EELS analysis was sponsored by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The authors would like to thank Anna Crespi and Francesc Xavier Campos for assistance with the 3D reciprocal space tomography and reciprocal space map measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Trapping and electrical characterization of single core/shell iron-based nanoparticles in self-aligned nanogaps

  • Labra Muñoz, Jacqueline
  • Konstantinović, Z.
  • Balcells, Lluis
  • Pomar, Alberto
  • Zant, Herre S. J. van der
  • Dulić, Diana
We report on the fabrication and measurements of platinum-self-aligned nanogap devices containing cubed iron (core)/iron oxide (shell) nanoparticles (NPs) with two average different sizes (13 and 17 nm). The nanoparticles are deposited by means of a cluster gun technique. Their trapping across the nanogap is demonstrated by comparing the current vs voltage characteristics (I-Vs) before and after the deposition. At low temperature, the I-Vs can be well fitted to the Korotkov and Nazarov Coulomb blockade model, which captures the coexistence of single-electron tunneling and tunnel barrier suppression upon a bias voltage increase. The measurements thus show that Coulombblockaded devices can be made with a nanoparticle cluster source, which extends the existing possibilities to fabricate such devices to those in which it is very challenging to reduce the usual NP agglomeration given by a solution method., This study was supported by the EU Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie Grant Agreement No. 645658 (DAFNEOX Project), by two FONDECYT REGULAR Grant Nos. 1181080 and 1161775, and by two FONDEQUIP Grant Nos. EQM140055 and EQM180009. We thank the Spanish Ministry of Science, Innovation and Universities (Project Nos. MAT2015-71664-R and RTI2018-099960-B-I00) and the Serbian Ministry of Education, Science and Technological Development (Project No. III45018) for their support. A.P. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resistive Switching in Semimetallic SrIrO3 Thin Films

  • Fuentes, Víctor
  • Vasić, Borislav
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Balcells, Lluis
  • Pomar, Alberto
Local electrical properties, measured by conductive atomic force microscopy, of semimetallic SrIrO3 thin films are reported. The appearance of an Anderson-type metal–insulator transition (MIT) triggered by disorder and spatial localization due to film thickness reduction is analyzed as well as their influence on the resistive switching behavior. For thin enough films (below ∼3 nm) samples are insulating with hysteretic I–V curves indicative of reversible resistive switching behavior between two states of clearly different resistance at room temperature. A sharp transition into a low resistance state (LRS), i.e., an abrupt increase of the current intensity, is detected above a well-defined threshold voltage indicative of localization of charge carriers. On the other hand, thicker samples exhibit a semimetallic character, and I–V curves show progressive changes of the local resistance without a clearly defined threshold voltage, thus evidencing the absence of a MIT transition with a well-defined resistance jump between the different resistance states., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R (HETEROCS), and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 645658 (DAFNEOX Project) and FEDER Program. B.V. and Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (projects OI171005 and III45018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous in-flight assembly of magnetic nanoparticles into macroscopic chains

  • Balcells, Lluis
  • Stanković, Igor
  • Konstantinović, Z.
  • Alagh, Aanchal
  • Fuentes, Víctor
  • López Mir, Laura
  • Oró, Judith
  • Mestres, Narcís
  • García Izquierdo, Carlos
  • Pomar, Alberto
  • Martínez Perea, Benjamín
Knowing the interactions controlling aggregation processes in magnetic nanoparticles is of strong interest in preventing or promoting nanoparticles’ aggregation at wish for different applications. Dipolar magnetic interactions, proportional to the particle volume, are identified as the key driving force behind the formation of macroscopic aggregates for particle sizes above about 20 nm. However, aggregates’ shape and size are also strongly influenced by topological ordering. 1-D macroscopic chains of several micrometer lengths are obtained with cube-shaped magnetic nanoparticles prepared by the gas-aggregation technique. Using an analytical model and molecular dynamics simulations, the energy landscape of interacting cube-shaped magnetic nanoparticles is analysed revealing unintuitive dependence of the force acting on particles with the displacement and explaining pathways leading to their assembly into long linear chains. The mechanical behaviour and magnetic structure of the chains are studied by a combination of atomic and magnetic force measurements, and computer simulation. The results demonstrate that [111] magnetic anisotropy of the cube-shaped nanoparticles strongly influences chain assembly features., The authors acknowledge the financial support from European Commission H2020 project DAFNEOX (Grant No. 645658). I. S. and Z. K. acknowledge the support of Ministry of Education, Science, and Technological Development of Republic of Serbia – projects ON171017 and III45018. Financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), RTI2018-099960-B-I00, and MAT2015-71664-R, co-financed by the European Regional Development Fund, is gratefully acknowledged. I.S. and C.G. acknowledge the financial support received from Proyecto CONICYT PIA/Basal FB 0821 and CONICYT MEC80170122. A.P., V.F. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments. Numerical calculations were run on the PARADOX supercomputing facility at the Scientific Computing Laboratory of the Institute of Physics Belgrade., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonstoichiometry Driven Ferromagnetism in Double Perovskite La2Ni1−xMn1+xO6 Insulating Thin Films

  • Bernal Salamanca, Mónica E.
  • Konstantinović, Z.
  • Balcells, Lluis
  • Pannunzio Miner, Elisa V.
  • Sandiumenge, Felip
  • López Mir, Laura
  • Bozzo, Bernat
  • Herrero Martín, Javier
  • Pomar, Alberto
  • Frontera, Carlos
  • Martínez Perea, Benjamín
In this work we report on the epitaxial growth of La2NiMnO6 double perovskite thin films on top of (001) oriented SrTiO3 substrates by RF magnetron sputtering. The influence of oxygen pressure (PO2 ) and growth temperature on the microstructure, stoichiometry of the films, and magnetic and transport properties is thoroughly investigated. It is found that high oxygen pressure promotes the growth of stoichiometric films, with a Ni/Mn ratio almost equal to 1. However, these films exhibit poor ferromagnetic properties with respect to the expected optimum values corresponding to ferromagnetic ordering mediated by superexchange interaction between Mn4+ and Ni2+ according to the Goodenough-Kanamori rules. Most interestingly, films grown at low PO2 exhibit Ni/Mn ratios below 1, but ferromagnetic properties close to the optimal ones. The valence balance between Ni and Mn ions in nonstoichiometric sample has been elucidated by X-ray absorption spectroscopy. The results indicate that Ni deficiency plays a crucial role in the puzzling insulating ferromagnetic behavior observed in nonstoichiometric samples., M.B.-S., Ll.B., F.S., B.B., C.F., B.M., and A.P. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and Project MAT2015-71664-R. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 645658 (DAFNEOX Project). Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (III45018). Authors thank ALBA synchrotron (Spain) for the provision of beamtime., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic magnetic properties and spin pumping in polymer-assisted-deposited La0.92MnO3 thin films

  • Wang, Hailin
  • Pomar, Alberto
  • Martin Rio, Sergi
  • Frontera, Carlos
  • Mestres, Narcís
  • Martínez Perea, Benjamín
Complex oxide thin films grown by using chemical methods are of strong interest because of their low-cost, environment friendly fabrication and easy scalability. However, their introduction in spintronic applications or magnetic devices is still scarce mainly because of concerns regarding their interfacial quality. Here, we report on the preparation by polymer-assisted-deposition (PAD) of epitaxial La0.92MnO3 (LMO) thin films. We demonstrate that ferromagnetic conducting LMO thin films with smooth surfaces (rms ∼ 0.2 nm) can be prepared by PAD. By means of temperature-dependent broadband ferromagnetic resonance (FMR), we show that the LMO film exhibits a four-fold in-plane anisotropy, with [110] being the easy in-plane axis, compatible with strain release from the rhombohedral bulk phase. It has also been found that the isotropic Gilbert damping, α, determined from the broadening of the FMR linewidth, does not show a relevant extrinsic contribution and it exhibits an intraband-like temperature dependence, i.e. it increases as temperature decreases. By capping LMO thin films with a 10 nm thick Pt layer deposited ex situ, damping is substantially enhanced, from a value at 150 K of αLMO ∼ 1 × 10−2 for the bare LMO film to αLMO+Pt ∼ 2.5 × 10−2 for the Pt capped film. This strong increase of magnetic damping is indicative of the transfer of spin momentum from LMO to the Pt layer by spin pumping. Our results demostrate that LMO films grown by PAD may be used as efficient spin source systems in heterostructures for spintronic devices., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (SEV-2015-04969), HETEROCS (MAT2015-71664-R), SUMATE (RTI2018-095853-B-C21) and SPINCURIOX (RTI2018-099960-B-I00) projects cofinanced by the European Regional Development Fund. This project has received funding from the European Union through the Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 645658 (DAFNEOX Project) and through the FEDER Program. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the PhD programme in Materials Science of the Universitat Autònoma de Barcelona, through the China Scholarships Council (CSC)/Universitat Autònoma de Barcelona (UAB) Joint Scholarship. Authors thank Dr B. Bozzo and F. J. Campos for their technical support during magnetic and X-ray diffraction measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale mechanical control of surface electrical properties of manganite films with magnetic nanoparticles

  • Vasić, Borislav
  • Konstantinović, Z.
  • Pannunzio Miner, Elisa V.
  • Valencia, Sergio
  • Abrudan, Radu
  • Gajić, Rados
  • Pomar, Alberto
Mechanical control of electrical properties in complex heterostructures, consisting of magnetic FeOx nanoparticles on top of manganite films, is achieved using atomic force microscope (AFM) based methods. Under applied pressure of the AFM tip, drop of the electrical conductivity is observed inducing an electrically insulating state upon a critical normal load. Current and surface potential maps suggest that the switching process is mainly governed by the flexoelectric field induced at the sample surface. The relaxation process of the electrical surface potential indicates that the diffusion of oxygen vacancies from the bulk of the manganite films towards the sample surface is the dominant relaxation mechanism. The magnetic FeOx nanoparticles, staying attached to the sample surface after the rubbing, protect the underlying manganite films and provide stability of the observed resistive switching effect. The employed mechanical control gives a new freedom in the design of resistive switching devices since it does not depend on the film thickness, and biasing is not needed., B. V. and Z. K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No. OI171005 and III45018). E. P.-M. and A. P. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and project MAT2015-71664 R. This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). B. V. thanks Dimitrije Stepanenko for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic resolution imaging and quantitative elemental mapping of the misfit dislocation core phase in multicomponent oxides

  • Bagués, Núria
  • Santiso, José
  • Esser, Bryan D.
  • Williams, Robert E. A.
  • McComb, Dave W.
  • Konstantinović, Z.
  • Balcells, Lluis
  • Sandiumenge, Felip
N.B. thanks the Spanish MINECO for the financial support through the FPI program. This research was funded by Spanish MINECO (Grant Numbers: SEV-2015-0496, MAT2015-71664-R, SEV-2013-0295), European Union Horizon 2020 research and innovation programme (Grant Number: 645658), Generalitat de Catalunya (Grant Numbers: 2014 SGR 501, 2014 SGR 1216). B.D.E. and D.W.M. acknowledge support from the Center for Emergent Materials at the Ohio State University, a National Science Foundation Materials Research Science and Engineering Center (Grant Number: DMR1420451)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Molecule Transport of Fullerene-Based Curcuminoids

  • Dulić, Diana
  • Rates, Alfredo
  • Castro, Edison
  • Labra Muñoz, Jacqueline
  • Aravena, Daniel
  • Etcheverry Berríos, Álvaro
  • Riba López, Daniel
  • Ruiz, Eliseo
  • Aliaga Alcalde, Nuria
  • Soler, Mònica
  • Echegoyen, Luis
  • Zant, Herre S. J. van der
We present experimental and theoretical studies of single-molecule conductance through nonplanar fullerocurcuminoid molecular dyads in ambient conditions using the mechanically controllable break junction technique. We show that molecular dyads with bare fullerenes form configurations with conductance features related to different transport channels within the molecules, as identified with filtering and clustering methods. The primary channel corresponds to charge transport through the methylthio-terminated backbone. Additional low-conductance channels involve one backbone side and the fullerene. In fullerenes with four additional equatorial diethyl malonate groups attached to them, the latter transport pathway is blocked. Density functional theory calculations corroborate the experimental observations. In combination with nonequilibrium green functions, the conductance values of the fullerocurcuminoid backbones are found to be similar to those of a planar curcuminoid molecule without a fullerene attached. In the nonplanar fullerocurcuminoid systems, the highest-conductance peak occurs partly through space, compensating for the charge delocalization loss present in the curcuminoid system., Financial support from the European Commission (COST Action MOLSPIN CA15128 and EU RISE (DAFNEOX) project SEP-210165479) is gratefully acknowledged. The work at the University of Chile was supported by Fondecyt Regular Project 1181080 (D.D.), Fondecyt Regular Project 1161775 (M.S.), Fondecyt Regular Project 1170524 (D.A.), and Fondequip EQM140055 and EQM180009 (D.D). Powered@NLHPC: this research was partially supported by the supercomputing infrastructure of the NLHPC (ECM-02). E.R. acknowledges MICIIN for grant PGC2018-093863-B-C21 and the Maria de Maeztu Excellence grant MDM-2017-0767, for the computer resources, technical expertise, and assistance provided by the Barcelona Supercomputing Centre and CSUC and to the Generalitat de Catalunya for an ICREA Academia award and grant 2017SGR1289. H.S.J.v.d.Z. acknowledges support from the Dutch Science foundation (NWO). N.A.-A. thanks MEC for grant MAT2016-77852-C2-1-R, to the Generalitat de Catalunya for the grant 2017SGR1277, and the Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement 724981). L.E. thanks the US National Science Foundation (NSF) for generous support of this work under the CHE-1801317 program. The Robert A. Welch Foundation is also gratefully acknowledged for an endowed chair to L.E. (grant AH-0033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectric properties of lightly Nb doped SrTiO3 thin films

  • Bhansali, S.
  • Khunsin, W.
  • Chatterjee, A.
  • Santiso, José
  • Abad, B.
  • Martín-González, Marisol
  • Jakob, Gerhard
  • Sotomayor Torres, C. M.
  • Chávez-Angel, Emigdio
Novel thermoelectric materials developed for operation at room temperature must have similar or better performance along with being as ecofriendly as those commercially used, e.g., BiTe, in terms of their toxicity and cost. In this work, we present an in-depth study of the thermoelectric properties of epitaxial Nb-doped strontium titanate (SrTiNbO) thin films as a function of (i) doping concentration, (ii) film thickness and (iii) substrate type. The excellent crystal quality was confirmed by high resolution transmission electron microscopy and X-ray diffraction analysis. The thermoelectric properties were measured by the three-omega method (thermal conductivity) and van der Pauw method (electrical resistivity), complemented by Seebeck coefficient measurements. A maximum power factor of 8.9 × 10 W m K and a thermoelectric figure of merit of 0.49 were measured at room temperature in 50 nm-thick films grown on lanthanum strontium aluminate. The mechanisms behind this high figure of merit are discussed in terms of a possible two-dimensional electron gas, increase of the effective mass of the electrons, electron filtering and change in strain due to different substrates. The overall enhancement of the thermoelectric properties suggests that SrTiNbO is a very promising n-type candidate for room- to high-temperature applications., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM is also acknowledged. AC and JS acknowledge support from the projects MINECO ref. MAT2016-77100-C2-1-P and CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for support through project 2017SGR.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Switching on superferromagnetism

  • Arora, A.
  • Phillips, L. C.
  • Nukala, P.
  • Ben Hassine, M.
  • Ünal, A. A.
  • Dkhil, B.
  • Balcells, Lluis
  • Iglesias-Freire, Óscar
  • Barthélémy, Agnès
  • Kronast, Florian
  • Bibes, Manuel
  • Valencia, Sergio
Recent results in electric-field control of magnetism have paved the way for the design of alternative magnetic and spintronic devices with enhanced functionalities and low power consumption. Among the diversity of reported magnetoelectric effects, the possibility of switching on and off long-range ferromagnetic ordering close to room temperature stands out. Its binary character opens up the avenue for its implementation in magnetoelectric data storage devices. Here we show the possibility to locally switch on superferromagnetism in a wedge-shaped polycrystalline Fe thin film deposited on top of a ferroelectric and ferroelastic BaTiO 3 substrate. A superparamagnetic to superferromagnetic transition is observed for confined regions for which a voltage applied to the ferroelectric substrate induces a sizable strain. We argue that electric-field-induced changes of magnetic anisotropy lead to an increase of the critical temperature separating the two regimes so that superparamagnetic regions develop collective long-range superferromagnetic behavior., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large thermoelectric power variations in epitaxial thin films of layered perovskite GdBaCo2O5.5±δ with a different preferred orientation and strain

  • Chatterjee, Arindom
  • Chávez-Angel, Emigdio
  • Ballesteros, Belén
  • Caicedo, José Manuel
  • Padilla-Pantoja, Jessica
  • Leborán, Victor
  • Sotomayor Torres, C. M.
  • Rivadulla, Francisco
  • Santiso, José
This work describes the growth of thin epitaxial films of the layered perovskite material GdBaCo2O5.5±δ (GBCO) on different single crystal substrates SrTiO3 (STO), (LaAlO3)0.3(Sr2TaAlO6)0.7 (LSAT) and LaAlO3 (LAO) as an approach to study changes in the thermoelectric properties by means of the induced epitaxial strain. In addition to strain changes, the films grow with considerably different preferred orientations and domain microstructures: GBCO films on STO are purely c-axis oriented (c⊥) with an average 0.18% in-plane tensile strain; GBCO on LSAT is composed of domains with a mixed orientation (c‖ and c⊥) with an average 0.71% in-plane compressive strain; while on LAO it is b-axis oriented (c‖) with an average 0.89% in-plane compressive strain. These differences result in important cell volume changes, as well as in the orthorhombicity of the a–b plane of the GBCO structure, which in turn induce a change in the sign and temperature dependence of the thermopower, while the electrical conductivity remains almost unchanged. In general, compressively strained films show negative S thermopower (n-type) while tensile strained films show a positive S (p-type) at low temperatures, probing the adaptive nature of the GdBaCo2O5.5±δ compound. These results point to the spontaneous generation of oxygen vacancies to partially accommodate the epitaxial stress as the main cause for this effect., This work was supported by the projects: MINECO ref. MAT2016-77100-C2-1-P and CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR327. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). CMS and ECA acknowledge support from the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). AC particularly acknowledges the support of the Severo Ochoa programme and ICN2 for his PhD grant. FR acknowledges support from MAT2016-80762-R, Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09), by the European Union (European Regional Development Fund-ERDF) and the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-2016-Project No. 734187 – SPICOLOST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resistive switching in Strontium iridate based thin films

  • Fuentes, Víctor
  • Vasić, Borislav
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Balcells, Lluis
  • Pomar, Alberto
We report on the local electrical properties, measured by conductive atomic force microscopy, of the Iridate-based Srn+1IrnO3n+1 family of thin films, in particular by comparing the n = 1, Sr2IrO4, and the n = ∞, SrIrO3, phases. We analyze the different resistive switching behavior as a function of the pristine electronic properties of the films. We will show that, for films exhibiting insulating behavior, i.e., films of the n = 1 phase or films below 3 nm of thickness for the n = ∞ phase, hysteretic I–V curves with a sharp transition into a low resistance state (LRS), i.e. an abrupt increase of the current intensity, is detected above a well-defined threshold voltage. This suggests a resistive switching behavior associated to the jump between two resistance states that may be correlated to the activation energy, Δ, obtained by fitting the temperature dependence of the resistivity to a thermal activated Arrhenius law, ρ (T) ~ ρ0exp(−Δ/kBT). On the other hand, thicker samples of the n = ∞ phase exhibit a semimetallic character and I–V curves show progressive changes of the local resistance without a clearly defined threshold voltage. Kelvin Probe Force Microscopy based measurements confirmed that, concomitantly to the resistive switching, an evolution of the electronic states at the surface takes place that may be associated to the migration of oxygen vacancies promoted by the electrical fields under the AFM tip., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R (HETEROCS) and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. B.V. and Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No. OI171005 and III45018). A.P., V.F. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature dependence of spin pumping and inverse spin Hall effect in permalloy/Pt bilayers

  • Martin Rio, Sergi
  • Pomar, Alberto
  • Balcells, Lluis
  • Bozzo, Bernat
  • Frontera, Carlos
  • Martínez Perea, Benjamín
The temperature dependence of the spin pumping process in Fe80Ni20 (Py)/Pt bilayers is analyzed for different Pt capping layer thickness. Samples have been grown by means of dc magnetron sputtering, at room temperature, on top of Si substrates. In order to get an optimized interface between the Py and the Pt layers, the Pt capping layers were deposited In situ. The values of the damping constant, α, obtained for the Py alone samples, around 0.007 at RT, make evident the good quality of the samples. The increase of α due to spin pumping into the Pt layer is clearly appreciated; α values in Py/Pt bilayers are twice the value in Py alone. Spin pumping is confirmed by direct measurements of the inverse spin Hall effect (ISHE) voltage signal (VISHE) measured across the samples. To separate ISHE and spin rectification contributions to VISHE the line shape analysis method has been used and the conditions for its applicability thoroughly discussed. VISHE increases almost linearly on lowering temperature for all the frequencies investigated and smoothly increases as frequency decreases showing roughly a linear dependence with the inverse of the frequency. The Pt layer thickness dependence of α and VISHE suggest a low interfacial spin mixing conductance and high spin memory loss., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R and RTI2018-099960-B-I00 and funding from the EU (European Union) Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of Nickel Oxide Nanocuboids in Ferromagnetic La2Ni1−xMn1+xO6

  • Bernal Salamanca, Mónica E.
  • Konstantinović, Z.
  • Frontera, Carlos
  • Fuentes, Víctor
  • Pomar, Alberto
  • Balcells, Lluis
  • Martínez Perea, Benjamín
The control of the spontaneous formation of nanostructures at the surface of thin films is of strong interest in many different fields, from catalysts to microelectronics, because surface and interfacial properties may be substantially enhanced. Here, we analyze the formation of nickel oxide nanocuboids on top of La2Ni1−xMn1+xO6 double perovskite ferromagnetic thin films, epitaxially grown on SrTiO3 (001) substrates by radio-frequency (RF) magnetron sputtering. We show that, by annealing the films at high temperature under high oxygen partial pressure, the spontaneous segregation of nanocuboids is enhanced. The evolution of the structural and magnetic properties of the films is studied as a function of the annealing treatments at different temperatures. It is shown that the formation of NiOx nanocuboids leads to a nanostructured film surface with regions of locally different electrical transport characteristics., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (CEX2019-000917-S) and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (III45018). This work has been performed in the framework of the PhD program of the Universitat Autonoma de Barcelona (UAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin diffusion length associated with out-of-plane conductivity of Pt in spin pumping experiments

  • González Fuentes, Claudio
  • Henríquez, Ricardo
  • García Izquierdo, Carlos
  • Dumas, Randy K.
  • Bozzo, Bernat
  • Pomar, Alberto
We present a broadband ferromagnetic resonance study of the Gilbert damping enhancement (α) due to spin pumping in NiFe/Pt bilayers. The bilayers, which have negligible interfacial spin memory loss, are studied as a function of the Pt layer thickness (tPt) and temperature (100–293 K). Within the framework of diffusive spin pumping theory, we demonstrate that Dyakonov-Perel (DP) or Elliot-Yaffet (EY) spin relaxation mechanisms acting alone are incompatible with our observations. In contrast, if we consider that the relation between spin relaxation characteristic time (τs) and momentum relaxation characteristic time (τp) is determined by a superposition of DP and EY mechanisms, the qualitative and quantitative agreement with experimental results is excellent. Remarkably, we found that τp must be determined by the out-of-plane electrical resistivity (ρ) of the Pt film and hence its spin diffusion length (λPt) is independent of tPt. Our work settles the controversy regarding the tPt dependence of λPt by demonstrating its fundamental connection with ρ considered along the same direction of spin current flow., This work was supported by FONDECYT Grant No. 3170908, ANID FONDECYT/REGULAR 1201102, ANID PIA/APOYO AFB180002, ANID FONDEQUIP EQM140161, and European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 645658 (DAFNEOX Project)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fractal polymer islands on top of ferromagnetic La2Ni0.6Mn1.4O6 thin films

  • Bernal Salamanca, Mónica E.
  • Konstantinović, Zorica
  • Balcells, Lluis
  • Scepanovic, Maja J.
  • Valencia, Sergio
  • Pannunzio-Miner, Elisa
  • Frontera, Carlos
  • Pomar, Alberto
  • Martínez Perea, Benjamín
The formation of the crystalline organic polymer (OP) islands on top of double perovskite ferromagnetic La2Ni1–xMn1+xO6 (x = 0.4) thin films by RF sputtering is reported. The presence of randomly ramified organic polymer islands for film grown on top of SrTiO3 and LaAlO3 substrates suggest the fractal growth. The stability of fractal OP islands is tested by an in-situ oxygen annealing process as function of the annealing temperature. The evolution of the fractal structure of OP islands is followed in parallel with the evolution of structural and magnetic properties of LNMO thin films. The modification of the manganese valence state due to the presence of organic polymer fractals is studied by means of X-ray photoemission microscopy., This work has received funding from the European Union's Horizon 2020 research and innovation under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). A.P. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments. E. P.-M. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S), and project MAT2015-71664 and SPINCURIOX (RTI2018-099960-B-I00). M. Š. and Z. K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No III45018). This work has been performed in the framework of the PhD program of the Universitat Autonoma de Barcelona (UAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suppression of spin rectification effects in spin pumping experiments

  • Martin Rio, Sergi
  • Frontera, Carlos
  • Pomar, Alberto
  • Balcells, Lluis
  • Martínez Perea, Benjamín
Spin pumping (SP) is a well-established method to generate pure spin currents allowing efficient spin injection into metals and semiconductors avoiding the problem of impedance mismatch. However, to disentangle pure spin currents from parasitic effects due to spin rectification effects (SRE) is a difficult task that is seriously hampering further developments. Here we propose a simple method that allows suppressing SRE contribution to inverse spin Hall effect (ISHE) voltage signal avoiding long and tedious angle-dependent measurements. We show an experimental study in the well-known Py/Pt system by using a coplanar waveguide (CPW). Results obtained demonstrate that the sign and size of the measured transverse voltage signal depends on the width of the sample along the CPW active line. A progressive reduction of this width evidences that SRE contribution to the measured transverse voltage signal becomes negligibly small for sample width below 200 μm. A numerical solution of the Maxwell equations in the CPW-sample setup, by using the Landau-Lifshitz equation with the Gilbert damping term (LLG) as the constitutive equation of the media, and with the proper set of boundary conditions, confirms the obtained experimental results., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (CEX2019-000917-S), RTI2018-099960-B-I00 and funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. CF thanks Prof. M. Kostylev for fruitful communications., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved High Temperature Thermoelectric Properties in Misfit Ca3Co4O9 by Thermal Annealing

  • Chatterjee, Arindom
  • Sachat, Alexandros el
  • Banik, Ananya
  • Biswas, Kanishka
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, C. M.
  • Santiso, José
  • Chávez-Angel, Emigdio
Ca3Co4O9, a p-type thermoelectric material based on transition-metal oxides, has garnered significant interest due to its potential in thermoelectric applications. Its unique misfit-layered crystal structure contributes to low thermal conductivity and a high Seebeck coefficient, leading to a thermoelectric figure of merit (zT) of ≥1 at 1000 K. Conventionally, it has been believed that thermopower reaches its upper limit above 200 K. However, our thermopower measurements on polycrystalline Ca3Co4O9 samples have revealed an unexpected increase in thermopower above 380 K. In this study, we investigate the effects of high oxygen pressure annealing on Ca3Co4O9 and provide an explanation based on the mixed oxide states of cobalt and carrier hopping. Our results demonstrate that annealing induces modifications in the defect chemistry of Ca3Co4O9, leading to a decrease in electron hopping probability and the emergence of a thermal activation-like behavior in thermopower. These findings carry significant implications for the design and optimization of thermoelectric materials based on misfit cobaltates, opening new avenues for enhanced thermoelectric performance., This research was funded by MINECO ref. MAT2016-77100-C2-1-P; CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA program/Generalitat de Catalunya and by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). C.M.S.T. and E.C.-Á. acknowledge support from Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM. A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Thermoelectric Properties of Misfit Bi2Sr2-xCaxCo2Oy: Isovalent Substitutions and Selective Phonon Scattering

  • Chatterjee, Arindom
  • Banik, Ananya
  • Sachat, Alexandros el
  • Caicedo, José Manuel
  • Padilla-Pantoja, Jessica
  • Sotomayor Torres, C. M.
  • Biswas, Kanishka
  • Santiso, José
  • Chávez-Angel, Emigdio
Layered Bi-misfit cobaltates, such as Bi2Sr2Co2Oy, are the natural superlattice of an electrically insulating rocksalt (RS) type Bi2Sr2O4 layer and electrically conducting CoO2 layer, stacked along the crystallographic c-axis. RS and CoO2 layers are related through charge compensation reactions (or charge transfer). Therefore, thermoelectric transport properties are affected when doping or substitution is carried out in the RS layer. In this work, we have shown improved thermoelectric properties of spark plasma sintered Bi2Sr2-xCaxCo2Oy alloys (x = 0, 0.3 and 0.5). The substitution of Ca atoms affects the thermal properties by introducing point-defect phonon scattering, while the electronic conductivity and thermopower remain unaltered., This research was funded by MINECO ref. MAT2016-77100-C2-1-P; CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). C.M.S.T. and E.C.-A. acknowledge support from Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM. A.E.S. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of oxygen stoichiometry on the thermoelectric properties of Bi2Sr2Co2Oy thin films

  • Chatterjee, Arindom
  • El Sachat, Alexandros
  • Sotomayor Torres, C. M.
  • Santiso, José
  • Chávez-Angel, Emigdio
In this study, we present a comprehensive analysis of the thermoelectric (TE) properties of highly c-axis-oriented thin films of layered misfit cobaltates Bi2Sr2Co2Oy. The films exhibit a high c-axis orientation, facilitating precise measurements of electronic transport and TE properties along the a-b crystallographic plane. Our findings reveal that the presence of nearly stoichiometric oxygen content results in high thermopower with metallic conductivity, while the annealing of the films in a reduced oxygen atmosphere eliminates their metallic behavior. According to the well-established Heike's limit, the thermopower tends to become temperature independent when the thermal energy significantly exceeds the bandwidth, which provides a rough estimation of charge carrier density by using the Heike's formula. This observation suggests that the dominant contribution to the thermopower comes from the narrow Co-t2g bands near the Fermi energy. Our study demonstrates that the calculated thermopower value using Heike's formula, based on the Hall electron density of the Bi2Sr2Co2Oy thin films at 300 K, aligns well with the experimental results, shedding light on the intriguing TE properties of this family of layered cobaltate oxide films., This work was supported by the following projects: MINECO ref MAT2016-77100-C2-1-P; CNRS-CSIC PICS project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). AC acknowledges the support from Severo Ochoa programme and ICN2 for his PhD grant. AES acknowledges funding from the EU-H2020 research and innovation program under the ERC grant TheMA (grant no. 101117958). CMST acknowledges the support from Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM. ECA acknowledges the support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Single-molecule transport of fullerene-based curcuminoids

  • Dulić, Diana
  • Rates, Alfredo
  • Castro, Edison
  • Labra-Muñoz, Jacqueline
  • Aravena Ponce, Daniel Alejandro
  • Etcheverry-Berrios, Alvaro
  • Riba López, Daniel
  • Ruiz Sabín, Eliseo
  • Aliaga-Alcalde, Núria
  • Soler, Mònica
  • Echegoyen, Luis
  • van der Zant, Herre S. J.
We present experimental and theoretical studies of single-molecule conductance through nonplanar fullerocurcuminoid molecular dyads in ambient conditions using the mechanically controllable break junction technique. We show that molecular dyads with bare fullerenes form configurations with conductance features related to different transport channels within the molecules, as identified with filtering and clustering methods. The primary channel corresponds to charge transport through the methylthio-terminated backbone. Additional low-conductance channels involve one backbone side and the fullerene. In fullerenes with four additional equatorial diethyl malonate groups attached to them, the latter transport pathway is blocked. Density functional theory calculations corroborate the experimental observations. In combination with nonequilibrium green functions, the conductance values of the fullerocurcuminoid backbones are found to be similar to those of a planar curcuminoid molecule without a fullerene attached. In the nonplanar fullerocurcuminoid systems, the highest-conductance peak occurs partly through space, compensating for the charge delocalization loss present in the curcuminoid system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Misfit Dislocation Guided Topographic and Conduction Patterning in Complex Oxide Epitaxial Thin Films

  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Bagués, Núria|||0000-0002-9360-0915
  • Santiso, José|||0000-0003-4274-2101
  • Paradinas, Markos|||0000-0003-1006-9506
  • Pomar, Alberto|||0000-0002-5855-2356
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Casanove, Marie-Jo
  • Martínez, Benjamín|||0000-0001-9879-7748
Interfacial dissimilarity has emerged in recent years as the cornerstone of emergent interfacial phenomena, while enabling the control of electrical transport and magnetic behavior of complex oxide epitaxial films. As a step further toward the lateral miniaturization of functional nanostructures, this work uncovers the role of misfit dislocations in creating periodic surface strain patterns that can be efficiently used to control the spatial modulation of mass transport phenomena and bandwidth-dependent properties on a ≈20 nm length scale. The spontaneous formation of surface strain-relief patterns in LaSrMnO/LaAlO films results in lateral periodic modulations of the surface chemical potential and tetragonal distortion, controlling the spatial distribution of preferential nucleation sites and the bandwidth of the epilayer, respectively. These results provide insights into the spontaneous formation of strain-driven ordered surface patterns, topographic and functional, during the growth of complex oxide heterostructures on lengths scales far below the limits achievable through top-down approaches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of Self-Organized Mn3O4 Nanoinclusions in LaMnO3 Films

  • Pomar, Alberto|||0000-0002-5855-2356
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Bagués, Núria|||0000-0002-9360-0915
  • Roqueta, Jaume
  • López-Mir, Laura|||0000-0002-5279-8849
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Frontera, Carlos|||0000-0002-0091-4756
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Gutiérrez Llorente, Araceli
  • Scepanovic, Maja
  • Lazarevic, Nenad
  • Popovic, Zoran V.
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Santiso, José|||0000-0003-4274-2101
We present a single-step route to generate ordered nanocomposite thin films of secondary phase inclusions (Mn3O4) in a pristine perovskite matrix (LaMnO3) by taking advantage of the complex phase diagram of manganese oxides. We observed that in samples grown under vacuum growth conditions from a single LaMnO3 stoichiometric target by Pulsed Laser Deposition, the most favorable mechanism to accommodate Mn2+ cations is the spontaneous segregation of self-assembled wedge-like Mn3O4 ferrimagnetic inclusions inside a LaMnO3 matrix that still preserves its orthorhombic structure and its antiferromagnetic bulk-like behavior. A detailed analysis on the formation of the self-assembled nanocomposite films evidences that Mn3O4 inclusions exhibit an epitaxial relationship with the surrounding matrix that it may be explained in terms of a distorted cubic spinel with slight (~9°) c-axis tilting. Furthermore, a Ruddlesden-Popper La2MnO4 phase, helping to the stoichiometry balance, has been identified close to the interface with the substrate. We show that ferrimagnetic Mn3O4 columns influence the magnetic and transport properties of the nanocomposite by increasing its coercive field and by creating local areas with enhanced conductivity in the vicinity of the inclusions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-Arranged Misfit Dislocation Network Formation upon Strain Release in La0.7Sr0.3MnO3/LaAlO3(100) Epitaxial Films under Compressive Strain

  • Santiso, José|||0000-0003-4274-2101
  • Roqueta, Jaume
  • Bagués, Núria|||0000-0002-9360-0915
  • Frontera, Carlos|||0000-0002-0091-4756
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Lu, Qiyang
  • Yildiz, Bilge
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
Lattice-mismatched epitaxial films of LaSrMnO (LSMO) on LaAlO (001) substrates develop a crossed pattern of misfit dislocations above a critical thickness of 2.5 nm. Upon film thickness increases, the dislocation density progressively increases, and the dislocation spacing distribution becomes narrower. At a film thickness of 7.0 nm, the misfit dislocation density is close to the saturation for full relaxation. The misfit dislocation arrangement produces a 2D lateral periodic structure modulation (Λ≈ 16 nm) alternating two differentiated phases: one phase fully coherent with the substrate and a fully relaxed phase. This modulation is confined to the interface region between film and substrate. This phase separation is clearly identified by X-ray diffraction and further proven in the macroscopic resistivity measurements as a combination of two transition temperatures (with low and high T). Films thicker than 7.0 nm show progressive relaxation, and their macroscopic resistivity becomes similar than that of the bulk material. Therefore, this study identifies the growth conditions and thickness ranges that facilitate the formation of laterally modulated nanocomposites with functional properties notably different from those of fully coherent or fully relaxed material.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectric properties of lightly Nb doped SrTiO3 thin films

  • Bhansali, Sweta
  • Khunsin, Worawut
  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Santiso, José|||0000-0003-4274-2101
  • Abad Mayor, Begoña|||0000-0001-7589-7973
  • Martín González, Marisol
  • Jakob, Gerhard|||0000-0001-9466-0840
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Novel thermoelectric materials developed for operation at room temperature must have similar or better performance along with being as ecofriendly as those commercially used, e.g., BiTe, in terms of their toxicity and cost. In this work, we present an in-depth study of the thermoelectric properties of epitaxial Nb-doped strontium titanate (SrTiNbO) thin films as a function of (i) doping concentration, (ii) film thickness and (iii) substrate type. The excellent crystal quality was confirmed by high resolution transmission electron microscopy and X-ray diffraction analysis. The thermoelectric properties were measured by the three-omega method (thermal conductivity) and van der Pauw method (electrical resistivity), complemented by Seebeck coefficient measurements. A maximum power factor of 8.9 × 10 W m K and a thermoelectric figure of merit of 0.49 were measured at room temperature in 50 nm-thick films grown on lanthanum strontium aluminate. The mechanisms behind this high figure of merit are discussed in terms of a possible two-dimensional electron gas, increase of the effective mass of the electrons, electron filtering and change in strain due to different substrates. The overall enhancement of the thermoelectric properties suggests that SrTiNbO is a very promising n-type candidate for room- to high-temperature applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nonstoichiometry driven ferromagnetism in double perovskite La2Ni1-xMn1+ xO6 insulating thin films

  • Bernal Salamanca, Mónica Emperatriz
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Pannunzio-Miner, Elisa
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Lopez-Mir, Laura
  • Bozzo, Bernat
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Pomar, Alberto|||0000-0002-5855-2356
  • Frontera, Carlos|||0000-0002-0091-4756
  • Martínez, Benjamín|||0000-0001-9879-7748
In this work we report on the epitaxial growth of LaNiMnO double perovskite thin films on top of (001) oriented SrTiO substrates by RF magnetron sputtering. The influence of oxygen pressure (P O) and growth temperature on the microstructure, stoichiometry of the films, and magnetic and transport properties is thoroughly investigated. It is found that high oxygen pressure promotes the growth of stoichiometric films, with a Ni/Mn ratio almost equal to 1. However, these films exhibit poor ferromagnetic properties with respect to the expected optimum values corresponding to ferromagnetic ordering mediated by superexchange interaction between Mn and Ni according to the Goodenough-Kanamori rules. Most interestingly, films grown at low P O exhibit Ni/Mn ratios below 1, but ferromagnetic properties close to the optimal ones. The valence balance between Ni and Mn ions in nonstoichiometric sample has been elucidated by X-ray absorption spectroscopy. The results indicate that Ni deficiency plays a crucial role in the puzzling insulating ferromagnetic behavior observed in nonstoichiometric samples.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An in operando study of chemical expansion and oxygen surface exchange rates in epitaxial GdBaCo2O5.5 electrodes in a solid-state electrochemical cell by time-resolved X-ray diffraction

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Santiso, José|||0000-0003-4274-2101
This report explores the fundamental characteristics of epitaxial thin films of a mixed ionic electronic conducting GdBaCoO (GBCO) material with a layered perovskite structure, relevant for use as an active electrode for the oxygen reduction and evolution reactions in electrochemical devices. Time-resolved X-ray diffraction in combination with voltage step chrono-amperometric measurements in a solid state electrochemical cell provides a deeper insight into the chemical expansion mechanism in the GBCO electrode. The chemical expansion coefficient along the c-axis, α, shows a negative value upon the compound oxidation contrary to standard perovskite materials with disordered oxygen vacancies. Chemical expansion also shows a remarkable asymmetry from α = -0.037 to -0.014 at δ < 0 and δ.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Large thermoelectric power variations in epitaxial thin films of layered perovskite GdBaCo2O5.5±δwith a different preferred orientation and strain

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Leborán, Víctor|||0000-0001-9806-3234
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Rivadulla, Francisco|||0000-0003-3099-0159
  • Santiso, José|||0000-0003-4274-2101
This work describes the growth of thin epitaxial films of the layered perovskite material GdBaCoO(GBCO) on different single crystal substrates SrTiO(STO), (LaAlO)(SrTaAlO)(LSAT) and LaAlO(LAO) as an approach to study changes in the thermoelectric properties by means of the induced epitaxial strain. In addition to strain changes, the films grow with considerably different preferred orientations and domain microstructures: GBCO films on STO are purelyc-axis oriented (c) with an average 0.18% in-plane tensile strain; GBCO on LSAT is composed of domains with a mixed orientation (candc) with an average 0.71% in-plane compressive strain; while on LAO it isb-axis oriented (c) with an average 0.89% in-plane compressive strain. These differences result in important cell volume changes, as well as in the orthorhombicity of thea-bplane of the GBCO structure, which in turn induce a change in the sign and temperature dependence of the thermopower, while the electrical conductivity remains almost unchanged. In general, compressively strained films show negativeSthermopower (n-type) while tensile strained films show a positiveS(p-type) at low temperatures, probing the adaptive nature of the GdBaCoOcompound. These results point to the spontaneous generation of oxygen vacancies to partially accommodate the epitaxial stress as the main cause for this effect.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Thermoelectric Properties of Misfit BiSrCaCoO, Isovalent Substitutions and Selective Phonon Scattering

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Banik, Ananya
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Biswas, Kanishka
  • Santiso, José|||0000-0003-4274-2101
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Layered Bi-misfit cobaltates, such as BiSrCoO, are the natural superlattice of an electrically insulating rocksalt (RS) type BiSrO layer and electrically conducting CoO layer, stacked along the crystallographic c-axis. RS and CoO layers are related through charge compensation reactions (or charge transfer). Therefore, thermoelectric transport properties are affected when doping or substitution is carried out in the RS layer. In this work, we have shown improved thermoelectric properties of spark plasma sintered BiSrCaCoO alloys (x = 0, 0.3 and 0.5). The substitution of Ca atoms affects the thermal properties by introducing point-defect phonon scattering, while the electronic conductivity and thermopower remain unaltered.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Improved High Temperature Thermoelectric Properties in Misfit Ca3Co4O9 by Thermal Annealing

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Banik, Ananya
  • Biswas, Kanishka
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Santiso, José|||0000-0003-4274-2101
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
CaCoO, a p-type thermoelectric material based on transition-metal oxides, has garnered significant interest due to its potential in thermoelectric applications. Its unique misfit-layered crystal structure contributes to low thermal conductivity and a high Seebeck coefficient, leading to a thermoelectric figure of merit (zT) of ≥1 at 1000 K. Conventionally, it has been believed that thermopower reaches its upper limit above 200 K. However, our thermopower measurements on polycrystalline CaCoO samples have revealed an unexpected increase in thermopower above 380 K. In this study, we investigate the effects of high oxygen pressure annealing on CaCoO and provide an explanation based on the mixed oxide states of cobalt and carrier hopping. Our results demonstrate that annealing induces modifications in the defect chemistry of CaCoO, leading to a decrease in electron hopping probability and the emergence of a thermal activation-like behavior in thermopower. These findings carry significant implications for the design and optimization of thermoelectric materials based on misfit cobaltates, opening new avenues for enhanced thermoelectric performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of Oxygen Stoichiometry on the Thermoelectric Properties of Bi2Sr2Co2Oy Thin Films

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Santiso, José|||0000-0003-4274-2101
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
In this study, we present a comprehensive analysis of the thermoelectric (TE) properties of highly c-axis-oriented thin films of layered misfit cobaltates BiSrCoO. The films exhibit a high c-axis orientation, facilitating precise measurements of electronic transport and TE properties along the a-b crystallographic plane. Our findings reveal that the presence of nearly stoichiometric oxygen content results in high thermopower with metallic conductivity, while the annealing of the films in a reduced oxygen atmosphere eliminates their metallic behavior. According to the well-established Heike's limit, the thermopower tends to become temperature independent when the thermal energy significantly exceeds the bandwidth, which provides a rough estimation of charge carrier density by using the Heike's formula. This observation suggests that the dominant contribution to the thermopower comes from the narrow Co-t bands near the Fermi energy. Our study demonstrates that the calculated thermopower value using Heike's formula, based on the Hall electron density of the BiSrCoO thin films at 300 K, aligns well with the experimental results, shedding light on the intriguing TE properties of this family of layered cobaltate oxide films.