Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Torsional dependence of the critical current in 2G tapes

  • Sotelo, G. G.
  • Granados, X.
  • Carrera i Vilanova, Miquel
  • López López, José
Since the second-generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year, the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field, and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken into account since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications such as fault-current limiters, superconducting magnetic energy storage, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, this paper studies the electrical and mechanical properties of 12-mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU under the Project EU FP7-2013- ICT-609029 FORTISSIMO, Project EU-FP7 NMP-LA-2012-280432 EUROTAPES, Project Eurofusion PPPT-WPMAG 2014, and EU COST ACTIONS MP1201and MP1014; by MINECO under Grant RTC-2014-1740-3 and Grant MAT2014-51778-C2-1-R, by Generalitat de Catalunya (Xarmae), and by CNPq (Ciencia sem Fronteiras).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Torsional Dependence of the Critical Current in 2G Tapes

  • Sotelo, Guilherme Gonçalves
  • Granados, Xavier
  • Carrera, Miquel
  • López López, Josep
Since the second generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken in account, since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications as fault current limiters, SMES, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, the present work studies the electrical and mechanical properties of 12 mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU (EU FP7-2013-ICT-609029 FORTISSIMO project, EU-FP7 NMP-LA-2012-280432 EUROTAPES project, Eurofusion PPPT-WPMAG 2014 and EU COST COST ACTIONS MP1201and MP1014), MINECO (RTC-2014-1740-3 and MAT2014-51778-C2-1-R), Generalitat de Catalunya (Xarmae) and to CNPq (Ciencia sem Fronteiras)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

H-Formulation FEM Modeling of the Current Distribution in 2G HTS Tapes and Its Experimental Validation Using Hall Probe Mapping

  • Sotelo, Guilherme Gonçalves
  • Carrera, Miquel
  • Granados, Xavier
One of the most widespread mathematical formulations applied to simulate the electromagnetic phenomena of coated conductor in the recent literature is the H one. However, the only validation of the model has been indirect by using measurements taken from the applications, as measurements of the energy losses in ac fields, forces developed in levitation systems or any other parameter related to a specific application. Direct validation of the calculation requires the observation of the local out of plane magnetic field over the surface of the sample and this is only accessible under magneto-optical observations and, in a larger scale and better dynamic range, by the Hall scanning microscopy. We propose here the experimental validation of the H-formulation by comparing the simulated results with measurements made by a Hall probe mapping in a second generation (2G) tape sample for several DC transported currents at 77 K. The paper presents a methodology to simulate the 2G tape by using only measured data obtained from a sample and its normalized J(B) experimental curves. Some boundary conditions that allow a faster convergence of the problem are investigated. Simulated results of the 2G tape modelled considering only the 1 μm HTS layer were compared with other that represent the most important layers of the coated conductor structure in the calculations. The simulated and measured results present a good agreement, proving that this model can calculate precisely the magnetic field and, hence, the current distribution in HTS samples., The authors would like to thank the Brazilian Agency CNPq for the grant “Science without Borders” and the financial supported given by the European agencies EU (EU FP7-2013-ICT-609029 FORTISSIMO project, EU-FP7 NMP-LA-2012-280432 EUROTAPES project, Eurofusion PPPT-WPMAG 2014 and EU COST ACTIONS MP1201 and MP1014), MINECO (RTC-2014-1740-3) and the financial support from Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superconducting medium speed synchronous electrical generator for 2MW class wind mills

  • Granados, Xavier
  • López López, Josep
  • Muñoz, A.
  • Rodriguez-Izal, J. L.
  • Salvatierra, C.
  • Martínez Fernández, Elena
  • Angurel, Luis A.
  • Puig Molina, Teresa
  • Obradors, Xavier
Trabajo presentado a la 13th European Conference on Applied Superconductivity (EUCAS), celebrada en Geneva (Suiza) del 17 al 21 de septiembre de 2017., In the context of the National Co-funded Project “Design of a New generation of Generators and Ancillary Equipment for Wind Energy Based on Superconductors”, Gamesa Innovation and Technology S.L.U., ICMAB-CSIC and ICMA-CSIC-UNIZAR have developed and built a first protoype of a Medium Speed generator based in the well proved 2MW DFIG generators which are extensively installed in the Drive Train of the existing 2MW class Wind Turbines. The prototype has been tested in order to determine its thermal and electrical performances and possible cost competitiveness considering the global impact, in the medium size wind generators, considering thermal, mechanical and electrical concerns. Details of the superconducting architecture developed, cryogenics and mechanical concerns are reported.The resulting generator is able to improve the power an simplifies the overall system, Authors acknowledge the support of Spanish Ministry of Economy, Industry and Competitiveness for the Retos Colaboración funding RTC-2014-1740-3, Severo Ochoa Programme Centres of Excellence in R&D (SEV-2015-0496), CONSOLIDER Excellence Network (MAT2015-68994-REDC) and project MAT2014-56063-C2-1-R., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Torsional dependence of the critical current in 2G tapes

  • Sotelo, G. G.
  • Granados, X.
  • Carrera i Vilanova, Miquel
  • López López, José
Since the second-generation (2G) superconducting wires started to be produced in a large scale almost a decade ago, the quality of the materials manufactured has been continually improved. Every year, the manufacturers present new materials with better electrical properties, increasing the critical current density, critical magnetic field, and the total length produced with continuous homogeneity. The mechanical properties of the coated conductor should be taken into account since electro-dynamical forces appear in working conditions as stress in the cooling and heating processes. In applications such as fault-current limiters, superconducting magnetic energy storage, transformers, electromagnets, motors, cables, etc., the consideration of them is mandatory to the project of those devices. In this context, this paper studies the electrical and mechanical properties of 12-mm 2G wires samples under torsion without axial tension. Critical current is measured as a function on the torsion angle. Details of the experiment and their results are here presented., This work was supported in part by EU under the Project EU FP7-2013- ICT-609029 FORTISSIMO, Project EU-FP7 NMP-LA-2012-280432 EUROTAPES, Project Eurofusion PPPT-WPMAG 2014, and EU COST ACTIONS MP1201and MP1014; by MINECO under Grant RTC-2014-1740-3 and Grant MAT2014-51778-C2-1-R, by Generalitat de Catalunya (Xarmae), and by CNPq (Ciencia sem Fronteiras).