Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Na Reactivity toward Carbonate-Based Electrolytes: The Effect of FEC as Additive

  • Dugas, Romain
  • Ponrouch, Alexandre
  • Gachot, Grégory
  • David, R.
  • Palacín, M. Rosa
  • Tarascon, Jean-Marie
Na-ion batteries have regained attention because they offer sustainability advantages over the Li-ion technology, hence their interest for massive electrochemical storage. Although the Na-ion electrochemistry is analogous to that of the Li-ion concept, there are a few notable differences such as the stability of carbonated-based electrolytes toward the Li or Na metal anodes. Herein we report on the positive effect of FEC as electrolyte additive on the efficiency of Na-half cells which unfortunately comes with a side effect involving the sudden onset of polarization during discharge at unpredictable capacity values. We show that these anomalies, associated to an inefficient plating-stripping at the sodium metal anode, do not appear in full Na-ion cells. Therefore, FEC-based electrolytes are not the panacea and alternative additives must be sought to enable building of reliable half cells with metal anodes., Authors acknowledge EC for funding through H2020 NAIADES project (LCE10-2014, Contract number 646433), L. Simonin and Y. Chatillon from CEA for sending the Na3V2(PO4)2F3 materials, and members of both the RS2E Na-ion task force and ALISTORE-ERI for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diglyme Based Electrolytes for Sodium-Ion Batteries

  • Westman, Kasper
  • Dugas, Romain
  • Jankowski, Piotr
  • Wieczorek, Wladyslaw
  • Gachot, Grégory
  • Morcrette, Mathieu
  • Irisarri, Enrique
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
  • Tarascon, Jean-Marie
  • Johansson, Patrik
Sodium-ion batteries (SIBs) are currently being considered for large-scale energy storage. Optimization of SIB electrolytes is, however, still largely lacking. Here we exhaustively evaluate NaPF6 in diglyme as an electrolyte of choice, via both physicochemical properties and extensive electrochemical tests including half as well as full cells. Fundamentally, the ionic conductivity is found to be quite comparable to carbonate based electrolytes and to obey the fractional Walden rule with viscosity. We find Na metal to work well as a reference electrode and the electrochemical stability, evaluated potentiostatically for various electrodes and corroborated by DFT calculations, to be satisfactory in the entire voltage range 0–4.4 V. Galvanostatic cycling at C/10 of half and full cells using Na3V2(PO4)3 (NVP) or Na3V2(PO4)2F3 (NVPF) as cathodes and hard carbon (HC) as anodes indicates rapid capacity fading in cells with HC anodes, possibly originating in a lack of a stable SEI or by trapping of sodium. Aiming to understand this capacity fade further, we conducted a GC/MS analysis to determine electrolyte reduction products and to propose reduction pathways, concluding that oligomer and/or alkoxide formation is possible. Overall, the promising results should warrant further investigations of diglyme based electrolytes for modern SIB development, albeit avoiding HC anodes., We acknowledge the European Commission for the financial support for “Na-ion Battery Demonstration for Electric Storage” (NAIADES) under research grant agreement 646433 and especially L. Simonin and Y. Chatillon (CEA, Grenoble, France) for the NVPF material and for sharing high purity NaPF6. We also acknowledge funding from the Swedish Energy Agency from “Batterifonden” under ontract 37671-1 “Next generation batteries” and the ALISTORE-ERI community at large, but especially the SIB brainstorms for many fruitful discussions. Furthermore, we wish to acknowledge the Chalmers Master Card foundation for the travel and accommodation grants for K.W. All calculations were carried out at the Wrocław Centre for Networking and Supercomputing (www.wcss.pl), grant 346., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of Large Scale Produced Hard Carbon Performance in Na-Ion Batteries: Effect of Precursor, Temperature and Processing Conditions

  • Irisarri, Enrique
  • Amini, N.
  • Tennison, S.
  • Matei Ghimbeu, Camelia
  • Gorka, Joanna
  • Vix-Guterl, Cathie
  • Ponrouch, Alexandre
  • Palacín, M. Rosa
Hard carbon materials were prepared from different precursors (phenolic resin and commercially available cellulose and lignin) under different pyrolysis and processing conditions using industrially adapted syntheses protocols. The study of their microstructural features enabled to assess that the nature of the precursor and the temperature of pyrolysis are the major factors determining the carbon yield and the surface area, the latter one having a major effect on the electrochemical capacity. Finally, the presence of surface groups and physisorbed water can also play a role both on the maximum reversible capacity achievable (by influencing the interaction of sodium ions with the hard carbon surface) and the irreversible capacity. Phenolic resin combining high carbon yield (~50%), tap density (0.7 gcm-3) and reversible capacity (249 mAh/g) was found to be the precursor producing the most suitable hard carbon for practical use in Na-ion batteries. Cellulose can be a good candidate as well, the lower carbon yield being counterbalanced by its lower price and higher capacity (280 mAh/g)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SEI Composition on Hard Carbon in Na-Ion Batteries After Long Cycling: Influence of Salts (NaPF6, NaTFSI) and Additives (FEC, DMCF)

  • Fondard, J.
  • Irisarri, Enrique
  • Courrèges, Cécile
  • Palacín, M. Rosa
  • Ponrouch, Alexandre
  • Dedryvère, Rémi
A study of the Solid Electrolyte Interphase (SEI) on hard-carbon (HC) electrodes in sodium half-cells is presented. Electrochemical performances over > 100 cycles were compared with two different salts (NaPF6, NaTFSI) and two different electrolyte additives (FEC, DMCF) in a mixture of EC and DMC solvents. The best electrochemical performances were observed with NaPF6 salt in conjunction with 3% FEC. The DMCF additive had a detrimental effect in all electrolyte combinations. The chemical characterization of the SEI was carried out by X-ray Photoelectron Spectroscopy (XPS) and showed that the best electrochemical behavior was related to an SEI composition based on sodium ethylene dicarbonate and NaF, whereas poorer electrochemical performances were associated to either low NaF or high Na2CO3 content. The results reported herein provide an insight on the SEI chemistry on hard carbon electrodes in sodium cells after long-term cycling, as a complement to previous studies dealing with the first cycles., Authors acknowledge the European Commission for funding through H2020 NAIADES project (LCE10–2014, grant nb. 646433). EI, MRP and AP acknowledge Ministerio de Economía y Competititivad (Spain) for Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). This work has been done in the frame of the Doctoral Degree Program in Chemistry by the Universitat Autònoma de Barcelona. JF, CC and RD acknowledge Agence Nationale de la Recherche (ANR) for its “Investment for the Future” Program through I-SITE E2S-UPPA funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards standard electrolytes for sodium-ion batteries: physical properties, ion solvation and ion-pairing in alkyl carbonate solvents

  • Monti, Damien
  • Jónsson, Erlendur
  • Boschin, Andrea
  • Palacín, M. Rosa
  • Ponrouch, Alexandre
  • Johansson, Patrik
The currently emerging sodium-ion battery technology is in need of an optimized standard organic solvent electrolyte based on solid and directly comparable data. With this aim we have made a systematic study of “simple” electrolyte systems consisting of two sodium salts (NaTFSI and NaPF6) dissolved in three different alkyl carbonate solvents (EC, PC, DMC) within a wide range of salt concentrations and investigated: (i) their more macroscopic physico-chemical properties such as ionic conductivity, viscosity, thermal stability, and (ii) the molecular level properties such as ion-pairing and solvation. From this all electrolytes were found to have useful thermal operational windows and electrochemical stability windows, allowing for large scale energy storage technologies focused on load levelling or (to a less extent) electric vehicles, and ionic conductivities on par with analogous lithium-ion battery electrolytes, giving promise to also be power performant. Furthermore, at the molecular level the NaPF6-based electrolytes are more dissociated than the NaTFSI-based ones because of the higher ionic association strength of TFSI compared to PF6− while two different conformers of DMC participate in the Na+ first solvation shells – a Na+ affected conformational equilibrium and induced polarity of DMC. The non-negligible presence of DMC in the Na+ first solvation shells increases as a function of salt concentration. Overall, these results should both have a general impact on the design of more performant Na-conducting electrolytes and provide useful insight on the very details of the importance of DMC conformers in any cation solvation studies., We acknowledge funding received from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 646433 (NAIADES), the ALISTORE-ERI members for many fruitful discussions, and also the funding received from the Swedish Research Council the Swedish Energy Agency (#37671-1), the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning, the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). DM especially acknowledges the European Union for a H2020 MSCA-IF grant no. 74343. PJ is grateful for the continuous financial support from several of Chalmers Areas of Advance: Materials Science, Energy, and Transport. We also acknowledge the computational resources provided by the Swedish National Infrastructure for Computing (SNIC) at Chalmers Centre for Computational Science and Engineering (C3SE). Author Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2021 roadmap for sodium-ion batteries

  • Tapia Ruiz, Nuria
  • Forero Saboya, Juan
  • Ponrouch, Alexandre
  • Younesi, Reza
Tapia-Ruiz, Nuria et al., Increasing concerns regarding the sustainability of lithium sources, due to their limited availability and consequent expected price increase, have raised awareness of the importance of developing alternative energy-storage candidates that can sustain the ever-growing energy demand. Furthermore, limitations on the availability of the transition metals used in the manufacturing of cathode materials, together with questionable mining practices, are driving development towards more sustainable elements. Given the uniformly high abundance and cost-effectiveness of sodium, as well as its very suitable redox potential (close to that of lithium), sodium-ion battery technology offers tremendous potential to be a counterpart to lithium-ion batteries (LIBs) in different application scenarios, such as stationary energy storage and low-cost vehicles. This potential is reflected by the major investments that are being made by industry in a wide variety of markets and in diverse material combinations. Despite the associated advantages of being a drop-in replacement for LIBs, there are remarkable differences in the physicochemical properties between sodium and lithium that give rise to different behaviours, for example, different coordination preferences in compounds, desolvation energies, or solubility of the solid–electrolyte interphase inorganic salt components. This demands a more detailed study of the underlying physical and chemical processes occurring in sodium-ion batteries and allows great scope for groundbreaking advances in the field, from lab-scale to scale-up. This roadmap provides an extensive review by experts in academia and industry of the current state of the art in 2021 and the different research directions and strategies currently underway to improve the performance of sodium-ion batteries. The aim is to provide an opinion with respect to the current challenges and opportunities, from the fundamental properties to the practical applications of this technology., The authors gratefully acknowledge RS2E and Alistore-ERI for funding their research into Na-ion batteries. The funding received from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 646433 (NAIADES), the Swedish Research Council, the Swedish Energy Agency (#37671-1), and the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning (FORMAS), are all gratefully acknowledged. The many fruitful discussions within ALISTORE-ERI, and especially with M Rosa Palacín, have been most valuable. P J is also grateful for the continuous support from several of the Chalmers Areas of Advance: Materials Science and Energy. Funding from the European Union’s innovation program H2020 is acknowledged: H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397). A Ponrouch is grateful to the Spanish Ministry for Economy, Industry and Competitiveness Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First 18650-format Na-ion cells aging investigation: A degradation mechanism study

  • Nguyen, Long H. B.
  • Sanz Camacho, Paula
  • Fondard, Jérémie
  • Carlier, Dany
  • Croguennec, Laurence
  • Palacín, M. Rosa
  • Ponrouch, Alexandre
  • Courrèges, Cécile
  • Dedryvère, Rémi
  • Trad, Khiem
  • Jordy, Christian
  • Genies, Sylvie
  • Reynier, Yvan
  • Simonin, Loic
Several Hard carbon||Na3V2(PO4)2F3 full-cells in 18650-format are assembled to demonstrate the possible use of SIBs in stationary applications. The cell aging process is investigated in two different conditions: (i) continuous cycling at different current rates, and (ii) storage at different states-of-charge at various temperatures. The obtained results reveal that the cell degradation depends strongly on the temperature, current rates applied in cycling conditions, or state-of-charge of the storage test. Under cycling conditions, the continuous sodiation/desodiation may induce significant mechanical deformation, leading to the detachment of active materials from the current collector. Furthermore, the post-mortem analysis shows that reaction rate and aging process are not homogeneous along the electrode roll. The XRD analysis shows that Na3V2(PO4)2F3 structure is robust; nevertheless, the material cannot recover the initial Na+ content as the cycling progresses, which is the main cause for capacity loss in the positive electrode. The solid-electrolyte interphase present on the hard carbon surface was characterised using XPS. The hard carbon electrode cannot be detected during this study, evidencing the formation of a relatively thick (>5 nm) passivating layer composed of carbonate salts and NaF, which are the main products of electrolyte decomposition., The authors acknowledge the European Commission for funding this work through the H2020 NAIADES project (LCE10-2014, Contract number 646433). LC, DC, PSC and LHBN thank the RS2E Network for the funding of LHBN's PhD thesis as well as the financial support of Région Nouvelle Aquitaine. LC, DC, PSC, LHBN, CC, and RD acknowledge the French National Research Agency (STORE-EX Labex Project ANR-10-LABX-76-01) for financial support. MRP and AP acknowledge Ministerio de Economía y Competititivad (Spain) for Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496). The authors thank E. Garitte (SAFT, France) for her helps to coordinate this project., Peer reviewed