Pasar al contenido principal

Síntesis de materiales porosos metal-orgánicos

RYC2020-029749-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recyclable Homogeneous Catalysis Enabled by Dynamic Coordination on Rhodium(II) Axial Sites of Metal-Organic Polyhedra

  • Sánchez-Fuente, Miguel
  • Hernández López, Laura|||0000-0001-6394-2538
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
The activity of catalytic nanoparticles is strongly dependent on their surface chemistry, which controls colloidal stability and substrate diffusion toward catalytic sites. In this work, we studied how the outer surface chemistry of nanostructured Rh(II)-based metal-organic cages or polyhedra (Rh-MOPs) impacts their performance in homogeneous catalysis. Specifically, through post-synthetic coordination of aliphatic imidazole ligands onto the exohedral Rh(II) axial sites of Rh-MOPs, we solubilized a cuboctahedral Rh-MOP in dichloromethane, thereby enabling its use as a homogeneous catalyst. We demonstrated that the presence of the coordinating ligand on the surface of the Rh-MOP does not hinder its catalytic activity in styrene aziridination and cyclopropanation reactions, thanks to the dynamic Rh-imidazole coordination bond. Finally, we used similar ligand exchange post-synthetic reactions to develop a ligand-mediated approach for precipitating the Rh-MOP catalyst, facilitating the recovery and reuse of Rh-MOPs as homogeneous catalysts.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

(Bio)Functionalisation of Metal-Organic Polyhedra by Using Click Chemistry

  • Hernández-López, Laura
  • Baeckmann, Cornelia von
  • Martínez Esaín, Jordi
  • Cortés Martínez, Alba
  • Faraudo, Jordi
  • Caules, Caterina
  • Parella, Teodor
  • Maspoch, Daniel
  • Carné-Sánchez, Arnau
The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP., This work was supported by the Spanish MINECO (project RTI2018-095622-B−I00) and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA Programme /Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from the “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997) L.H.L acknowledges the support from the Spanish State Research Agency (PRE2019-088056). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J 4637. J. F acknowledges the financial support from MCIN/AEI/10.13039/501100011033 agency through Grant PID2021-124297NB-C33 and the “Severo Ochoa” Programme for Centres of Excellence in R\&D (CEX2019-000917-S) awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for Grant 2021SGR01519., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integration of Metal-Organic Polyhedra onto a Nanophotonic Sensor for Real-Time Detection of Nitrogenous Organic Pollutants in Water

  • Calvo-Lozano, Olalla
  • Hernández-López, Laura
  • Gomez, Leyre
  • Carné-Sánchez, Arnau
  • Baeckmann, Cornelia von
  • Lechuga, Laura M.
  • Maspoch, Daniel
The grave health and environmental consequences of water pollution demand new tools, including new sensing technologies, for the immediate detection of contaminants in situ. Herein, we report the integration of metal-organic cages or polyhedra (MOCs/MOPs) within a nanophotonic sensor for the rapid, direct, and real-time detection of small (<500 Da) pollutant molecules in water. The sensor, a bimodal waveguide silicon interferometer incorporating Rh(II)-based MOPs as specific chemical receptors, does not require sample pretreatment and enables minimal expenditure of time and reagents. We validated our sensor for the detection of two common pollutants: the industrial corrosion inhibitor 1,2,3-benzotriazole (BTA) and the systemic insecticide imidacloprid (IMD). The sensor offers a fast time-to-result response (15 min), high sensitivity, and high accuracy. The limit of detection (LOD) in tap water for BTA is 0.068 μg/mL and for IMD, 0.107 μg/mL, both of which are below the corresponding toxicity thresholds defined by the European Chemicals Agency (ECHA). By combining innovative chemical molecular receptors such as MOPs with state-of-the-art photonic sensing technologies, our research opens the path to implement competitive sensor devices for in situ environmental monitoring., This work was supported by the Spanish MCIN (R&D Project PID2019-108105RA-I00). It was also funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). L.G. thanks BIST for the PROBIST fellowship, a Marie Sklodoswska-Curie co-fund grant agreement number 754510. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia Grant (EUR2021-121997)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Post-synthetic modification of aerogels made of covalent cross-linked metal-organic polyhedra

  • Khobotov-Bakishev, Akim
  • Samanta, Partha
  • Roztocki, Kornel
  • Albalad, Jorge
  • Royuela, Sergio
  • Furukawa, Shuhei
  • Zamora, Félix
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Aerogels are porous ultralight materials known for their high porosity, wide range of pore sizes, low density, and good macroscopic mechanical properties, all of which make them promising candidates for shaped adsorbents, catalysts, and insulators, among other applications. Here, this work reports a new approach that enables both the formation of modular aerogels, via dynamic covalent chemistry, and their post-synthetic modification, via coordination chemistry. To demonstrate this strategy, this work first polymerizes porous amino-functionalized Rh(II)-based metal-organic polyhedra (MOPs) with aldehydes, which afforded robust imine-gel networks that is then converted into aerogels. Next, this work functionalizes these aerogels through the coordination of ligands on the axial site of Rh(II) paddlewheels of the MOP. Interestingly, in this chemistry, the local changes in the coordination site of the MOPs are transferred to the overall aerogel, thereby altering its macroscopic physicochemical properties. Importantly, this feature enables the synthesis of optimized adsorbents tailored to specific guests, as this work demonstrates through a series of experiments using ligands of different electrostatic and hydrophobic characters., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00, PID2019-106268GB-C32, and TED2021-129886B-C42)), and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997). K.R. gratefully acknowledges the support of the National Science Centre (NCN), Poland (Grants no. 2020/36/C/ST4/00534)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous and meltable metal-organic polyhedra for the generation and shaping of porous mixed-matrix composites

  • Baeckmann, Cornelia von
  • Martínez Esaín, Jordi
  • Suárez, José Antonio
  • Meng, Lingxin
  • Garcia-Masferrer, Joan
  • Faraudo, Jordi
  • Sort, Jordi
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal–organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO2 uptake relative to the parent film., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (projects 2021 SGR 00458 and 2021 SGR 00651), the CERCA Program/Generalitat de Catalunya, the MCIN/AEI/10.13039/501100011033, and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant SEV-2017-0706). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J4637. We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae III. J.F. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 agency through Grant PID2021-124297NB-C33 and the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for Grant 2021SGR01519. L.M. acknowledges the China Scholarship Council for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant oligomeric porous cage-based molecules

  • Cortés Martínez, Alba
  • Baeckmann, Cornelia von
  • Hernández-López, Laura
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
This article is part of the themed collection: #MyFirstChemSci 2024., Most reported porous materials are either extended networks or monomeric discrete cavities; indeed, porous structures of intermediate size have scarcely been explored. Herein, we present the stepwise linkage of discrete porous metal–organic cages or polyhedra (MOPs) into oligomeric structures with a finite number of MOP units. The synthesis of these new oligomeric porous molecules entails the preparation of 1-connected (1-c) MOPs with only one available azide reactive site on their surface. The azide-terminated 1-c MOP is linked through copper(I)-catalysed azide–alkyne cycloaddition click chemistry with additional alkyne-terminated 1-c MOPs, 4-c clusters, or 24-c MOPs to yield three classes of giant oligomeric molecules: dimeric, tetrameric, or satellite-like, respectively. Importantly, all the giant molecules that we synthesised are soluble in water and permanently porous in the solid state., This work has received funding from the Europa Excelencia grant (EUR2021-121997) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A. C. S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship). C. v. B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J 4637., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recyclable Homogeneous Catalysis Enabled by Dynamic Coordination on Rhodium(II) Axial Sites of Metal-Organic Polyhedra

  • Sánchez-Fuente, Miguel
  • Hernández-López, Laura
  • Maspoch, Daniel
  • Mas-Ballesté, Rubén
  • Carné-Sánchez, Arnau
The activity of catalytic nanoparticles is strongly dependent on their surface chemistry, which controls colloidal stability and substrate diffusion toward catalytic sites. In this work, we studied how the outer surface chemistry of nanostructured Rh(II)-based metal-organic cages or polyhedra (Rh-MOPs) impacts their performance in homogeneous catalysis. Specifically, through post-synthetic coordination of aliphatic imidazole ligands onto the exohedral Rh(II) axial sites of Rh-MOPs, we solubilized a cuboctahedral Rh-MOP in dichloromethane, thereby enabling its use as a homogeneous catalyst. We demonstrated that the presence of the coordinating ligand on the surface of the Rh-MOP does not hinder its catalytic activity in styrene aziridination and cyclopropanation reactions, thanks to the dynamic Rh-imidazole coordination bond. Finally, we used similar ligand exchange post-synthetic reactions to develop a ligand-mediated approach for precipitating the Rh-MOP catalyst, facilitating the recovery and reuse of Rh-MOPs as homogeneous catalysts., M. S.-F. and L. H.-L. contributed equally to this work. This work was supported by the Spanish MINECO (project RTI2018-095622-B−I00, PID2019-110637RB−I00 and PID2022-141016OB−I00) and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA Programme/Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from the “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997) L.H.L acknowledges the support from the Spanish State Research Agency (PRE2019-088056). M.S.-F. thanks Ministerio de Ciencia e Innovación for a FPI contract (PRE2020-092295)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Isoreticular Synthesis of Mesoporous Metal-Organic Polyhedra with Permanent Porosity to Gas and Water

  • Cortés Martínez, Alba
  • Fernández-Seriñán, Pilar
  • Baeckmann, Cornelia von
  • Caules, Caterina
  • Hernández-López, Laura
  • Gutiérrez, María Susana
  • Yang, Yunhui
  • Sánchez-Naya, Roberto
  • Suárez, José Antonio
  • Juanhuix, Judith
  • Imaz, Inhar
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Synthesis of mesoporous metal-organic cages or polyhedra (MOCs or MOPs) that retain their porous functionality in the solid-state remains challenging, given their tendency to collapse upon desolvation. Herein, we report the use of the isoreticular expansion approach to synthesize two permanently porous Rh(II)-based octahedral MOPs within the mesoporous regime. Our mesoporous MOPs, featuring internal cavities of up to 12.5 nm3, withstand the activation process, enabling their use as solid-state adsorbents for gases and water. In particular, the largest mesoporous MOP, named BCN-17, captures up to 0.47 gwater·gMOP -1 and exhibits an S-shaped water-sorption isotherm with a hysteresis loop, characteristic of mesoporous materials., This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 101019003, grant refs. PID2021-124804NB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J 4637. Y.Y. acknowledges the China Scholarship Council for scholarship support. M.S.G acknowledges the CONACyT for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DNA-Based Networks Formed by Coordination Cross-Linking of DNA with Metal-Organic Polyhedra: From Gels to Aerogels to Hydrogels

  • Hernández-López, Laura
  • Khobotov-Bakishev, Akim
  • Cortés Martínez, Alba
  • Garrido-Ribó, Eduard
  • Samanta, Partha
  • Royuela, Sergio
  • Zamora, Félix
  • Maspoch, Daniel
  • Carné-Sánchez, Arnau
Herein, we introduce a supramolecular method to form DNA-based networks by cross-linking DNA with Rh(II)-based metal-organic polyhedra (MOPs), which entails coordination of DNA to the exohedral Rh(II) axial sites of the MOP. The resultant highly connected networks can then be processed into gels, porous aerogels, or hydrogels, exhibiting properties suitable for pollutant removal and drug release., This work was supported by the Spanish MINECO (project RTI2018-095622–B-I00), the Catalan AGAUR (project 2021 SGR 00458), the CERCA Program/Generalitat de Catalunya, the MCIN/AEI/10.13039/501100011033, and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). ICN2 is supported by the Severo Ochoa program (grant CEX2021-001214-S) funded by MCIN/AEI/10.13039.501100011033. The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). A.C.-S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997). P.S. thanks the Generalitat de Catalunya for a Beatriu de Pinós fellowship (2022 BP 00085) (Co-funded by EU under the Marie Skłodowska-Curie Actions grant agreement)., CEX2021-001214-S, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

(Bio)Functionalisation of Metal-Organic Polyhedra by Using Click Chemistry

  • Hernández López, Laura|||0000-0001-6394-2538
  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Cortés-Martínez, Alba|||0000-0003-1679-5955
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Caules, Caterina
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Integration of Metal-Organic Polyhedra onto a Nanophotonic Sensor for Real-Time Detection of Nitrogenous Organic Pollutants in Water

  • Calvo Lozano, Olalla|||0000-0001-5486-2237
  • Hernández López, Laura|||0000-0001-6394-2538
  • Gomez, Leyre|||0000-0002-2926-5665
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Lechuga, Laura M.|||0000-0001-5187-5358
  • Maspoch, Daniel|||0000-0003-1325-9161
The grave health and environmental consequences of water pollution demand new tools, including new sensing technologies, for the immediate detection of contaminants in situ. Herein, we report the integration of metal-organic cages or polyhedra (MOCs/MOPs) within a nanophotonic sensor for the rapid, direct, and real-time detection of small (<500 Da) pollutant molecules in water. The sensor, a bimodal waveguide silicon interferometer incorporating Rh(II)-based MOPs as specific chemical receptors, does not require sample pretreatment and enables minimal expenditure of time and reagents. We validated our sensor for the detection of two common pollutants: the industrial corrosion inhibitor 1,2,3-benzotriazole (BTA) and the systemic insecticide imidacloprid (IMD). The sensor offers a fast time-to-result response (15 min), high sensitivity, and high accuracy. The limit of detection (LOD) in tap water for BTA is 0.068 μg/mL and for IMD, 0.107 μg/mL, both of which are below the corresponding toxicity thresholds defined by the European Chemicals Agency (ECHA). By combining innovative chemical molecular receptors such as MOPs with state-of-the-art photonic sensing technologies, our research opens the path to implement competitive sensor devices for in situ environmental monitoring.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Giant oligomeric porous cage-based molecules

  • Cortés-Martínez, Alba|||0000-0003-1679-5955
  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Hernández López, Laura|||0000-0001-6394-2538
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Most reported porous materials are either extended networks or monomeric discrete cavities; indeed, porous structures of intermediate size have scarcely been explored. Herein, we present the stepwise linkage of discrete porous metal-organic cages or polyhedra (MOPs) into oligomeric structures with a finite number of MOP units. The synthesis of these new oligomeric porous molecules entails the preparation of 1-connected (1-c) MOPs with only one available azide reactive site on their surface. The azide-terminated 1-c MOP is linked through copper(i)-catalysed azide-alkyne cycloaddition click chemistry with additional alkyne-terminated 1-c MOPs, 4-c clusters, or 24-c MOPs to yield three classes of giant oligomeric molecules: dimeric, tetrameric, or satellite-like, respectively. Importantly, all the giant molecules that we synthesised are soluble in water and permanently porous in the solid state.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Post-Synthetic Modification of Aerogels Made of Covalent Cross-linked Metal-Organic Polyhedra

  • Khobotov Bakishev, Akim|||0000-0002-6119-959X
  • Samanta, Partha|||0000-0002-2329-3729
  • Roztocki, Kornel
  • Albalad, Jorge|||0000-0001-5850-6723
  • Royuela, Sergio|||0000-0003-3113-1831
  • Furukawa, Shuhei|||0000-0003-3849-8038
  • Zamora, Félix|||0000-0001-7529-5120
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Aerogels are porous ultralight materials known for their high porosity, wide range of pore sizes, low density, and good macroscopic mechanical properties, all of which make them promising candidates for shaped adsorbents, catalysts, and insulators, among other applications. Here, this work reports a new approach that enables both the formation of modular aerogels, via dynamic covalent chemistry, and their post-synthetic modification, via coordination chemistry. To demonstrate this strategy, this work first polymerizes porous amino-functionalized Rh(II)-based metal-organic polyhedra (MOPs) with aldehydes, which afforded robust imine-gel networks that is then converted into aerogels. Next, this work functionalizes these aerogels through the coordination of ligands on the axial site of Rh(II) paddlewheels of the MOP. Interestingly, in this chemistry, the local changes in the coordination site of the MOPs are transferred to the overall aerogel, thereby altering its macroscopic physicochemical properties. Importantly, this feature enables the synthesis of optimized adsorbents tailored to specific guests, as this work demonstrates through a series of experiments using ligands of different electrostatic and hydrophobic characters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Porous and Meltable Metal-Organic Polyhedra for the Generation and Shaping of Porous Mixed-Matrix Composites

  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Meng, Lingxin
  • Garcia-Masferrer, Joan
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Sort, Jordi|||0000-0003-1213-3639
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal-organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO uptake relative to the parent film.