Pasar al contenido principal

THEORY AND SIMULATION OF SOFTMATTER FOR BIOMATERIALS APPLICATIONS

PID2021-124297NB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Lymph-node inspired hydrogels enhance CAR expression and proliferation of CAR T cells

  • Castellote-Borrell, Miquel|||0000-0001-7703-2228
  • Domingo, Marc|||0000-0003-1627-3823
  • Merlina, Francesca|||0000-0001-5040-1687
  • Lu, Huixia|||0000-0003-2731-5283
  • Colell, Salut|||0000-0002-2132-2856
  • Bachiller, Mireia|||0000-0002-6153-4722
  • Juan, Manel|||0000-0002-3064-1648
  • Guedan, Sonia|||0000-0002-9605-0760
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Guasch, Judith|||0000-0002-3571-4711
Chimeric antigen receptor (CAR) T therapy has shown unprecedented results in clinical practice, including long-term complete responses. One of the current challenges of CAR T therapy is to optimize its production in order to lower its cost. Currently, the in vivo activation of T cells by dendritic cells is replicated ex vivo using polymeric magnetic beads coated with antibodies to induce polyclonal T cell activation. However, current practice overlooks the importance of the complex environment that constitutes the lymph nodes, in which T cells activate and proliferate in vivo. Hydrogels are an ideal candidate material for mimicking the properties of natural tissues such as lymph nodes. In this study, key conditions of the composition, stiffness, and microarchitecture of hydrogels were experimentally and theoretically investigated to optimize primary human CAR T cell culture, focusing on CAR expression and proliferation. Poly(ethylene glycol)-heparin hydrogels featuring interconnected pores of 120 μm and an intermediate stiffness of 3.1 kPa were identified as the most suitable conditions for promoting CAR T cell expression and expansion. Specifically, these hydrogels increased the percentage of CAR+ cells by 50% and doubled the replication index compared to suspension cultures. In conclusion, these newly engineered hydrogels are an interesting tool to help improve CAR T cell manufacture and ultimately advance towards a broader clinical implementation of CAR T cell therapy.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Computer Simulation of the interaction between SARS-CoV-2 Spike Protein and the Surface of Coinage Metals

  • Sahihi, Mehdi
  • Faraudo, Jordi
Coinage metals like silver, gold and copper are historically known as materials with anti-infective properties; but the mechanism behind these properties is not yet clear, and several features seem to be effective in this regard. Here, we used an all-atom molecular dynamics simulation method to investigate the interaction of up and down conformations of the S1 subunit of the SARS-CoV-2 spike protein with the (100) surface of Au, Ag and Cu. Our results revealed that spike protein is adsorbed onto the surface of these metals, being the Cu-metal with the highest interaction with the spike and Au, the metal which induces bigger structural changes in the spike. In our simulations, we considered the spike protein in both its up and down conformations. We found that the affinity of the metals for the up-conformation was higher than their affinity for the down conformation of the spike protein due to the interactions with the receptor binding domain that is exposed in the up conformation but hidden in the down conformation. Comparing the present results for metals with those obtained in our previous MD simulations with other materials (cellulose, graphite, and human skin models), we see that Au induces the highest structural change in the spike, larger than those obtained in our previous studies., This work was supported by Grant PID2021-124297NB-C33 funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR” and by the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We thank the Spanish national supercomputing network (BSC-RES) for the award of computer time at the Minotauro supercomputer. M Sahihi is supported by the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Action Individual Fellowship Grant Agreement No. 101026158., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Dynamics Simulations of Adsorption of SARS-CoV-2 Spike Protein on Polystyrene Surface

  • Sahihi, Mehdi
  • Faraudo, Jordi
A prominent feature of coronaviruses is the presence of a large glycoprotein spike (S) protruding from the viral particle. The specific interactions of a material with S determine key aspects such as its possible role for indirect transmission or its suitability as a virucidal material. Here, we consider all-atom molecular dynamics simulations of the interaction between a polymer surface (polystyrene) and S in its up and down conformations. Polystyrene is a commonly used plastic found in electronics, toys, and many other common objects. Also, previous atomic force microscopy (AFM) experiments showed substantial adhesion of S over polystyrene, stronger than in other common materials. Our results show that the main driving forces for the adsorption of the S protein over polystyrene were hydrophobic and π–π interactions with S amino acids and glycans. The interaction was stronger for the case of S in the up conformation, which exposes one highly flexible receptor binding domain (RBD) that adjusts its conformation to interact with the polymer surface. In this case, the interaction has similar contributions from the RBD and glycans. In the case of S in the down conformation, the interaction with the polystyrene surface was weaker and it was dominated by glycans located near the RBD. We do not find significant structural changes in the conformation of S, a result which is in deep contrast to our previous results with another hydrophobic surface (graphite). Our results suggest that SARS-CoV-2 virions may adsorb strongly over plastic surfaces without significantly affecting their infectivity., This work was supported by Grant PID2021-124297NB-C33 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or the “European Union NextGenerationEU/PRTR”, and by the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. The authors thank CESGA Supercomputing Center for technical support and computer time at the supercomputers Finisterrae II and III. M.S. is supported by the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Action Individual Fellowship Grant Agreement No. 101026158., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computer Simulation of the Interaction between SARS-CoV-2 Spike Protein and the Surface of Coinage Metals

  • Sahihi, Mehdi
  • Faraudo, Jordi
A prominent feature of the SARS-CoV-2 virus is the presence of a large glycoprotein spike protruding from the virus envelope. The spike determines the interaction of the virus with the environment and the host. Here, we used an all-atom molecular dynamics simulation method to investigate the interaction of up- and down-conformations of the S1 subunit of the SARS-CoV-2 spike with the (100) surface of Au, Ag, and Cu. Our results revealed that the spike protein is adsorbed onto the surface of these metals, with Cu being the metal with the highest interaction with the spike. In our simulations, we considered the spike protein in both its up-conformation Sup (one receptor binding domain exposed) and down-conformation Sdown (no exposed receptor binding domain). We found that the affinity of the metals for the up-conformation was higher than their affinity for the down-conformation. The structural changes in the spike in the up-conformation were also larger than the changes in the down-conformation. Comparing the present results for metals with those obtained in our previous MD simulations of Sup with other materials (cellulose, graphite, and human skin models), we see that Au induces the highest structural change in Sup, larger than those obtained in our previous studies., This work was supported by Grant PID2021-124297NB-C33 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR” and by the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We thank the Spanish national supercomputing network (BSC-RES) for the award of computer time at the Minotauro supercomputer. M .S. is supported by the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie Action Individual Fellowship grant agreement no. 101026158., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stable nanovesicles formed by intrinsically planar bilayers

  • Köber, Mariana
  • Illa Tuset, Silvia
  • Ferrer Tasies, Lidia P.
  • Moreno Calvo, Evelyn
  • Tatkiewicz, Witold I.
  • Grimaldi, Natascia
  • Piña, David
  • Pérez Pérez, Alejandro
  • Lloveras, Vega
  • Vidal Gancedo, José
  • Bulone, Donatella
  • Ratera, Immaculada
  • Pedersen, Jan Skov
  • Danino, Dganit
  • Veciana, Jaume
  • Faraudo, Jordi
  • Ventosa, Nora
Quatsome nanovesicles, formed through the self-assembly of cholesterol (CHOL) and cetyltrimethylammonium bromide (CTAB) in water, have shown long-term stability in terms of size and morphology, while at the same time exhibiting high CHOL-CTAB intermolecular binding energies. We hypothesize that CHOL/CTAB quatsomes are indeed thermodynamically stable nanovesicles, and investigate the mechanism underlying their formation., This work was supported by funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. The production of quatsomes and part of their characterization has been performed by the ICTS “NANBIOSIS”, more specifically by the Biomaterial Processing and Nanostructuring Unit (U6), Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) located at the Institute of Materials Science of Barcelona (ICMAB-CSIC). ICMAB-CSIC acknowledges support from the MINECO through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S). Authors acknowledge financial support from the Spanish Ministry of Science and Innovation through grants “MOL4BIO” (PID2019-105622RB-I00), “SimBioSoft” (PID2021-124297NB-C33) and the FUNFUTURE-FIP-2020 Severo Ochoa project, from Generalitat de Catalunya through grant 2017-SGR-918, from CSIC through grant 2019AEP133, and from the European Commission through the H2020 PHOENIX project (contract no. 953110). We acknowledge the support of the Israel scienceIsrael science Foundation, grant 1117/2016, and thank Dr. Inbal Ionita for her professional assistance in the cryo-TEM analysis. We thank Jannik Nedergaard Pedersen and Beatrice Plazzotta for help with the SAXS measurements. The simulations reported here were performed using the Cori Supercomputing facility of the National Energy Research Scientific Computing Center (NERSC), a U.S. Department of Energy Office of Science User Facility operated under Contract No. DE-AC02-05CH11231., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of surfactants on SARS-CoV-2: Molecular dynamics simulations

  • Domingo, Marc
  • Faraudo, Jordi
Surfactants are commonly used as disinfection agents in personal care products against bacteria and viruses, including SARS-CoV-2. However, there is a lack of understanding of the molecular mechanisms of the inactivation of viruses by surfactants. Here, we employ coarse grain (CG) and all-atom (AA) molecular dynamics simulations to investigate the interaction between general families of surfactants and the SARS-CoV-2 virus. To this end, we considered a CG model of a full virion. Overall, we found that surfactants have only a small impact on the virus envelope, being inserted into the envelope without dissolving it or generating pores, at the conditions considered here. However, we found that surfactants may induce a deep impact on the spike protein of the virus (responsible for its infectivity), easily covering it and inducing its collapse over the envelope surface of the virus. AA simulations confirmed that both negatively and positively charged surfactants are able to extensively adsorb over the spike protein and get inserted into the virus envelope. Our results suggest that the best strategy for the design of surfactants as virucidal agents will be to focus on those strongly interacting with the spike protein., This work was supported by the Spanish Ministry of Science and Innovation under Grant No. PID2021-124297NB-C33, the “Severo Ochoa” under Grant No. CEX2019-000917-S for Centers of Excellence in R&D awarded to ICMAB, and the FPI under Grant No. PRE2020-093689 awarded to M.D. We also thank the Government of Catalonia (AGAUR) under Grant No. 2021SGR01519. We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interaction-Limited Aggregation: Fine-Tuning the Size of pNIPAM Particles by Association with Hydrophobic Ions

  • Faraudo, Jordi
  • Moncho Jordá, Arturo
  • Bastos González, Delfi
  • Drummond, Carlos
We have investigated the formation of stable clusters of poly(N-isopropylacrylamide) (pNIPAM) chains in water at temperatures above the lower critical solution temperature (LCST), induced by the presence of sodium tetraphenylborate, NaPh4B. The hydrophobic Ph4B- ions interact strongly with the pNIPAM chains, providing them with a net effective negative charge, which leads to the stabilization of pNIPAM clusters for temperatures above the LCST, with a mean cluster size that depends non-monotonically on salt concentration. Combining experiments with physical modeling at the mesoscopic level and atomistic molecular dynamic simulations, we show that this effect is caused by the interplay between the hydrophobic attraction between pNIPAM chains and the electrostatic repulsion induced by the associated Ph4B- ions. These results provide insight on the significance of weak associative anion-polymer interaction driven by hydrophobic interaction and how this anionic binding can prevent macroscopic phase separation. Harvesting the competition between attractive hydrophobic and repulsive electrostatic interaction opens avenues for the dynamic control of the formation of well-calibrated polymer microparticles., A.M.-J. and D.B.-G. are thankful for the financial support provided by the Junta de Andalucía and European Regional Development Fund – Consejería de Conocimiento, Investigación y Universidad (Projects PY20-00241 and A-FQM-90-UGR20). J.F. acknowledges financial support from MCIN/AEI/10.13039/501100011033 through Grant No. PID2021-124297NB-C33 and Generalitat de Catalunya - AGAUR (Grant 2021 SGR 01519). ICMAB is supported by the Spanish Government through the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S). We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ammonia Capture in Rhodium(II)-Based Metal-Organic Polyhedra via Synergistic Coordinative and H-Bonding Interactions

  • Carné-Sánchez, Arnau
  • Martínez Esaín, Jordi
  • Rookard, Tanner
  • Flood, Christopher J.
  • Faraudo, Jordi
  • Stylianou, Kyriakos C.
  • Maspoch, Daniel
Ammonia (NH3) is among the world's most widely produced bulk chemicals, given its extensive use in diverse sectors such as agriculture; however, it poses environmental and health risks at low concentrations. Therefore, there is a need for developing new technologies and materials to capture and store ammonia safely. Herein, we report for the first time the use of metal-organic polyhedra (MOPs) as ammonia adsorbents. We evaluated three different rhodium-based MOPs: [Rh2(bdc)2]12 (where bdc is 1,3-benzene dicarboxylate); one functionalized with hydroxyl groups at its outer surface [Rh2(OH-bdc)2]12 (where OH-bdc is 5-hydroxy-1,3-benzene dicarboxylate); and one decorated with aliphatic alkoxide chains at its outer surface [Rh2(C12O-bdc)2]12 (where C12O-bdc is 5-dodecoxybenzene-1,3-benzene dicarboxylate). Ammonia-adsorption experiments revealed that all three Rh-MOPs strongly interact with ammonia, with uptake capacities exceeding 10 mmol/gMOP. Furthermore, computational and experimental data showed that the mechanism of the interaction between Rh-MOPs and ammonia proceeds through a first step of coordination of NH3 to the axial site of the Rh(II) paddlewheel cluster, which triggers the adsorption of additional NH3 molecules through H-bonding interaction. This unique mechanism creates H-bonded clusters of NH3 on each Rh(II) axial site, which accounts for the high NH3 uptake capacity of Rh-MOPs. Rh-MOPs can be regenerated through their immersion in acidic water, and upon activation, their ammonia uptake can be recovered for at least three cycles. Our findings demonstrate that MOPs can be used as porous hosts to capture corrosive molecules like ammonia, and that their surface functionalization can enhance the ammonia uptake performance., This work was supported by the Spanish MINECO (project PID2021-124297NB-C33); the Catalan AGAUR (project 2017 SGR 238); the CERCA Program/Generalitat de Catalunya; the MCIN/AEI/10.13039/501100011033; and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant SEV-2017-0706). We also thank the “Severo Ochoa” Program for Centers of Excellence in R&D Grant CEX2019-000917-S awarded to ICMAB. The project that generated these results received support from the “la Caixa” Foundation (ID 100010434), through a fellowship (LCF/BQ/PR20/11770011)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

(Bio)Functionalisation of Metal-Organic Polyhedra by Using Click Chemistry

  • Hernández-López, Laura
  • Baeckmann, Cornelia von
  • Martínez Esaín, Jordi
  • Cortés Martínez, Alba
  • Faraudo, Jordi
  • Caules, Caterina
  • Parella, Teodor
  • Maspoch, Daniel
  • Carné-Sánchez, Arnau
The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP., This work was supported by the Spanish MINECO (project RTI2018-095622-B−I00) and the Catalan AGAUR (project 2021 SGR 00458). It was also funded by the CERCA Programme /Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from the “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997) L.H.L acknowledges the support from the Spanish State Research Agency (PRE2019-088056). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J 4637. J. F acknowledges the financial support from MCIN/AEI/10.13039/501100011033 agency through Grant PID2021-124297NB-C33 and the “Severo Ochoa” Programme for Centres of Excellence in R\&D (CEX2019-000917-S) awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for Grant 2021SGR01519., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In silico design of a lipid-like compound targeting KRAS4B-G12D through non-covalent bonds

  • Lu, Huixia
  • Hu, Zheyao
  • Faraudo, Jordi
  • Martí, Jordi
One of the most common drivers in human cancer is the peripheral membrane protein KRAS4B, able to promote oncogenic signalling. To signal, oncogenic KRAS4B not only requires a sufficient nucleotide exchange, but also needs to recruit effectors by exposing its effector-binding sites while anchoring to the phospholipid bilayer where KRAS4B-mediated signalling events occur. The enzyme phosphodiesterase-δ plays an important role in sequestering KRAS4B from the cytoplasm and targeting it to cellular membranes of different cell species. In this work, we present an in silico design of a lipid-like compound that has the remarkable feature of being able to target both an oncogenic KRAS4B-G12D mutant and the phosphodiesterase-δ enzyme. This double action is accomplished by adding a lipid tail (analogous to the farnesyl group of the KRAS4B protein) to an previously known active compound (2H-1,2,4-benzothiadiazine, 3,4-dihydro-,1,1-dioxide). The proposed lipid-like molecule was found to lock KRAS4B-G12D in its GDP-bound state by adjusting the effector-binding domain to be blocked by the interface of the lipid bilayer. Meanwhile, it can tune GTP-bound KRAS4B-G12D to shift from the active orientation state to the inactive state. The proposed compound is also observed to stably accommodate itself in the prenyl-binding pocket of phosphodiesterase-δ, which impairs KRAS4B enrichment at the lipid bilayer, potentially reducing the proliferation of KRAS4B inside the cytoplasm and its anchoring at the bilayer. In conclusion, we report a potential inhibitor of KRAS4B-G12D with a lipid tail attached to a specific warhead, a compound which has not yet been considered for drugs targeting RAS mutants. Our work provides new ways to target KRAS4B-G12D and can also foster drug discovery efforts for the targeting of oncogenes of the RAS family and beyond., We thank financial support by the Margarita Salas grant which is funded by the European Union – NextGenerationEU awarded to the Universitat Politecnica de Catalunya (Huixia Lu). We also thank financial support by grant PID2021-124297NB-C32 and PID2021-124297NB-C33 funded by MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe” and given by the “European Union NextGenerationEU/PRTR”. We also acknowledge financial support from Generalitat de Catalunya – AGAUR (grants 2021 SGR 01519 and 2021 SGR 01411). ICMAB is supported by the Spanish Government through the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S). We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae III supercomputer and the Barcelona Supercomputing Center for support on projects BCV-2023-3-0004 and BCV-2023-3-0005. Molecular graphics made with UCSF Chimera, developed by the Resource for Biocomputing, Visualization, and Informatics at the University of California, San Francisco, with support from NIH P41-GM103311. Zheyao Hu is a Ph.D. fellow from the China Scholarship Council (grant 202006230070)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How a few help all: cooperative crossing of lipid membranes by COSAN anions

  • Malaspina, David C.
  • Teixidor, Francesc
  • Viñas, Clara
  • Faraudo, Jordi
Experimental results show that the presence of a concentration gradient of certain nano-ions (most notably cobaltabisdicarbollide ([o-COSAN]- anions), induce a current across intact artificial phospholipid bilayers in spite of the high Born free energy estimated for these ions. The mechanism underlying this observed translocation of nano-anions across membranes has yet to be determined. Here we show, using molecular dynamics simulations, that the permeation of [o-COSAN]- anions across a lipid bilayer proceeds in a cooperative manner. Single nano-ions can enter the bilayer but permeation is hampered by a free energy barrier of about 8kBT. The interaction between these nano-ions inside a leaflet induces a flip-flop translocation mechanism with the formation of transient, elongated structure inside the membrane. This cooperative flip-flop allows an efficient distribution of [o-COSAN]- anions in both leaflets of the bilayer. These results suggest the existence of a new mechanism for permeation of nano-ions across lipid membranes, relevant for those that have the appropriate self-assembly character., We acknowledge financial support from MCIN/AEI/10.13039/501100011033 agency through Grants PID2021-124297NB-C33 and PID2019-106832RB-I00, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for Grants 2021SGR01519 and 2021SGR442. We thank the Spanish national supercomputing network (BSC-RES) for the award of computer time at the Minotauro supercomputer. D. C. Malaspina is supported by the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No. 6655919., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous and meltable metal-organic polyhedra for the generation and shaping of porous mixed-matrix composites

  • Baeckmann, Cornelia von
  • Martínez Esaín, Jordi
  • Suárez, José Antonio
  • Meng, Lingxin
  • Garcia-Masferrer, Joan
  • Faraudo, Jordi
  • Sort, Jordi
  • Carné-Sánchez, Arnau
  • Maspoch, Daniel
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal–organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO2 uptake relative to the parent film., This work was supported by the Spanish MINECO (project RTI2018-095622-B-I00), the Catalan AGAUR (projects 2021 SGR 00458 and 2021 SGR 00651), the CERCA Program/Generalitat de Catalunya, the MCIN/AEI/10.13039/501100011033, and by the European Union “NextGenerationEU”/PRTR (EUR2020-112294). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant SEV-2017-0706). The project that gave rise to these results received the support of a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). A.C.S. is indebted to the Ramón y Cajal Program (RYC2020-029749-I Fellowship) and the Europa Excelencia grant (EUR2021-121997). C.v.B. thanks the Austrian Science Fund (FWF), Erwin Schrödinger fellowship for supporting the project J4637. We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae III. J.F. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 agency through Grant PID2021-124297NB-C33 and the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S) awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for Grant 2021SGR01519. L.M. acknowledges the China Scholarship Council for scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrostatic interaction between SARS-CoV-2 and charged surfaces: Spike protein evolution changed the game

  • Domingo, Marc
  • Guzmán, Horacio
  • Kanduc, Matej
  • Faraudo, Jordi
Previous works show a key role of electrostatics for the SARS-CoV-2 virus in aspects such as virus-cell interactions or virus inactivation by ionic surfactants. Electrostatic interactions depend strongly on the variant since the charge of the Spike protein (responsible for virus - environment interactions) evolved across the variants from the highly negative Wild Type (WT) to the highly positive Omicron variant. The distribution of the charge also evolved from diffuse to highly localized. These facts suggest that SARS-CoV-2 should interact strongly with charged surfaces in a way that changed during the virus evolution. This question is studied here by computing the electrostatic interaction between WT, Delta and Omicron Spike proteins with charged surfaces using a new method (based on Debye-Huckel theory) that provides efficiently general results as a function of the surface charge density σ. We found that the interaction of the WT and Delta variant spikes with charged surfaces is dominated by repulsive image forces proportional to σ2 originated at the protein/water interface. On the contrary, the Omicron variant shows a distinct behaviour, being strongly attracted to negatively charged surfaces and repelled from positively charged ones. Therefore, the SARS-CoV-2 virus has evolved from being repelled by charged surfaces to being efficiently adsorbing to negatively charged ones., This work was supported by Grant No. PID2021-124297NB-C33 funded by MICIU/AEI/ 10.13039/501100011033, the “Severo Ochoa” Grant No. CEX2023-001263-S for Centers of Excellence awarded to ICMAB, and the FPI under Grant No. PRE2020-093689 awarded to M.D.We also thank the Government of Catalonia (AGAUR) under Grant No. 2021SGR01519. H.V.G. acknowledges financial support from the Maria Zambrano Grant No. CA6/RSUE/2022- 00108 and Ramon y Cajal grant No. RYC2022-038082-I. M.K. acknowledges financial support from the Slovenian Research and Innovation Agency ARIS (contracts P1-0055 and J1-4382). We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer. We thank Dr. Fiona L. Kearns (UCSD) for discussions regarding the spike protein structures. M.D. is enrolled in the Material Sciences Ph.D. program of the Universitat Aut`onoma de Barcelona., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrostatic Interaction between SARS-CoV-2 and Charged Surfaces: Spike Protein Evolution Changed the Game

  • Domingo, Marc
  • Guzmán, Horacio
  • Kanduc, Matej
  • Faraudo, Jordi
Previous works show the key role of electrostatics in the SARS-CoV-2 virus in aspects such as virus-cell interactions or virus inactivation by ionic surfactants. Electrostatic interactions depend strongly on the variant since the charge of the Spike protein (responsible for virus-environment interactions) evolved across the variants from the highly negative Wild Type (WT) to the highly positive Omicron variant. The distribution of the charge also evolved from diffuse to highly localized. These facts suggest that SARS-CoV-2 should interact strongly with charged surfaces in a way that changed during the virus evolution. This question is studied here by computing the electrostatic interaction between WT, Delta and Omicron Spike proteins with charged surfaces using a new method (based on Debye-Hückel theory) that provides efficiently general results as a function of the surface charge density σ. We found that the interaction of the WT and Delta variant spikes with charged surfaces is dominated by repulsive image forces proportional to σ2 originating at the protein/water interface. On the contrary, the Omicron variant shows a distinct behavior, being strongly attracted to negatively charged surfaces and repelled from positively charged ones. Therefore, the SARS-CoV-2 virus has evolved from being repelled by charged surfaces to being efficiently adsorbing to negatively charged ones., This work was supported by grant no. PID2021-124297NB-C33funded by MICIU/AEI/10.13039/501100011033, the “SeveroOchoa” grant no. CEX2023-001263-S for Centers of Excellenceawarded to ICMAB, and the FPI under grant no. PRE2020-093689 awarded to M.D. We also thank the Government ofCatalonia (AGAUR) under grant no. 2021SGR01519. H.V.G.acknowledges financial support from the Maria Zambrano grantno. CA6/RSUE/2022-00108 and Ramon y Cajal grant no.RYC2022-038082-I. M.K. acknowledges financial support fromthe Slovenian Research and Innovation Agency ARIS (contractsP1-0055 and J1-4382). We thank the CESGA supercomputingcenter for computer time and technical support at the Finisterraesupercomputer. We thank Dr. Fiona L. Kearns (UCSD) fordiscussions regarding the spike protein structures. M.D. isenrolled in the Material Sciences Ph.D. program of theUniversitat Autònoma de Barcelona, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lymph-Node Inspired Hydrogels Enhance CAR Expression and Proliferation of CAR T Cells

  • Castellote Borrell, Miquel
  • Domingo, Marc
  • Merlina, Francesca
  • Lu, Huixia
  • Colell, Salut
  • Bachiller, Mireia
  • Juan, Manel
  • Guedan, Sonia
  • Faraudo, Jordi
  • Guasch, Judith
Chimeric antigen receptor (CAR) T therapy has shown unprecedented results in clinical practice, including long-term complete responses. One of the current challenges of CAR T therapy is to optimize its production in order to lower its cost. Currently, the in vivo activation of T cells by dendritic cells is replicated ex vivo using polymeric magnetic beads coated with antibodies to induce polyclonal T cell activation. However, current practice overlooks the importance of the complex environment that constitutes the lymph nodes, in which T cells activate and proliferate in vivo. Hydrogels are an ideal candidate material for mimicking the properties of natural tissues such as lymph nodes. In this study, key conditions of the composition, stiffness, and microarchitecture of hydrogels were experimentally and theoretically investigated to optimize primary human CAR T cell culture, focusing on CAR expression and proliferation. Poly(ethylene glycol)-heparin hydrogels featuring interconnected pores of 120 μm and an intermediate stiffness of 3.1 kPa were identified as the most suitable conditions for promoting CAR T cell expression and expansion. Specifically, these hydrogels increased the percentage of CAR+ cells by 50% and doubled the replication index compared to suspension cultures. In conclusion, these newly engineered hydrogels are an interesting tool to help improve CAR T cell manufacture and ultimately advance toward a broader clinical implementation of CAR T cell therapy., This research was supported by “La Caixa” Foundation through the program “CaixaImpulse” (grant no. CI23-20216) and the Spanish Government through grants CNS2023-144236 (MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR), 2024ICT149, PID2020-115296RA-I00 and PID2021-124297NB-C33 (MICIU/AEI/10.13039/501100011033), the “Severo Ochoa” program for Centers of Excellence awarded to ICMAB (CEX2023-001263 S), the FPI fellowships PRE2021-098161 and PRE2020-093689 awarded to M.C-B. and M.D., respectively, and the “Ramón y Cajal” program (RYC-2018-024442-I) granted to S.G. We also thank the Government of Catalonia (AGAUR) for the grant 2021SGR01519 as well as the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rare-Earth Silicates as High-Temperature Surfactants for the Controlled Synthesis of ε-Fe2O3 Nanoparticles

  • Khanam, Naureen
  • Ma, Zheng
  • Ortiz Ropero, Sergi
  • Dix, Nico
  • Vila Costa, Ana
  • Oró, Judith
  • García Muñoz, Josep Lluís
  • Faraudo, Jordi
  • Gich, Martí
The functional properties of nanocrystals can be finely tuned through controlled morphology and size. However, this can be challenging for metastable nanostructures that require harsh synthesis conditions, such as high temperatures. Here, we present a method for preparing large ε-Fe2O3 nanorods that are not affected by magnetic relaxation. This study presents a novel growth mechanism in which high-aspect-ratio rods evolve from spherical ε-Fe2O3 particles in a silica matrix containing Y3+. With the presence of Y3+, the glassy matrix undergoes a metastable binodal decomposition yielding the formation of nanodroplets of a Y-rich silicate of composition ∼Y2Si2O7. This Y silicate selectively coats the ε-Fe2O3 planes perpendicular to the rod axis along the [100] direction but is not observed in the rod apexes. Structural optimizations and energy calculations of different crystal faces of ε-Fe2O3 in contact with Y2Si2O7 obtained using machine-learning force fields provide an atomistic interpretation of these observations: the affinity of Y with the oxygen atoms exposed at ε-Fe2O3 surfaces explains the preferential capping of ε-Fe2O3 surfaces that present a large density of oxygen atoms and its absence in surfaces such as (100), where this density is significantly lower. The presence or absence of the silicate capping layer results in different surface energies and/or mass transfer coefficients across the interface, originating two independent Ostwald ripening processes, which drive the high aspect ratio growth. By using La3+ instead of Y3+, ε-Fe2O3 rods with even larger aspect ratios are obtained. Notably, this synthetic approach counteracts the progressive diminution of the average nanoparticle size observed in ε-(Fe1-xCrx)2O3 upon Cr3+ addition, enabling to elucidate the effect of this substitution on the intrinsic magnetic anisotropy and the anisotropy fields that determine the high-frequency ferromagnetic resonances of this phase., This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 and Horizon Europe research and innovation programs, grant agreement nos. #819623 and #101138458, respectively. Financial support from the Spanish Agencia Estatal de Investigación (MICIU/AEI/10.13039/5011000110033) through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023-001263-S), and projects PID2021124734OB-C22 and PID2021-124297NB-C33, as well as the Generalitat de Catalunya (2021SGR00446), is acknowledged. The authors acknowledge the use of instrumentation and the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16014206 (METCAM-FIB) to ICN2 by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. The METCAM operators K. Gupta and B. Mundet are also acknowledged. The MSPD beamline (BL04) of the ALBA synchrotron provided beamtime access to perform powder XRD measurements (2019093918, 2023027535-2, and 2022097060-3), and we are grateful for the assistance of F. Fauth and C. Popescu. We acknowledge the assistance of the ICMAB-CSIC Scientific & Technical Services: Electron Microscopy service (J. Oró) and X-ray diffraction service (J. Esquius, X. Campos, and A. Crespi). We thank Dr. Pablo Guardia from ICMAB-CSIC for his relevant suggestions concerning reverse micelle synthesis. We are also grateful to Prof. Chris Lorenz from King’s College for insightful advice regarding machine-learning force fields., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Probing the structural dynamics of the unbound MAX protein: insights from well-tempered metadynamics

  • Lu, Huixia|||0000-0003-2731-5283
  • Martí Rabassa, Jordi|||0000-0002-3721-9634
  • Faraudo Gener, Jordi
One of most relevant challenges in tumorigenesis is the association of MYC and MAX proteins, whose related cancers remain undrugged. In particular, the disordered regions shown by those oncogenes make their structural characterization and the development of new drugs a truly hard task. To address these challenges, we employed the enhanced-sampling well-tempered metadynamics method to systematically explore the conformational space of the unbound MAX protein. Our results revealed, for the first time, a well-defined and thermodynamically favorable conformation of monomeric MAX. This is a remarkable finding, as it demonstrates that regions of MAX previously considered persistently disordered are capable of adopting stable, folded structures under specific conditions. Moreover, our findings also suggest that the metastable structural motifs observed in this work may harbor druggable sites, particularly relevant for strategies aiming to target MAX directly or to disrupt its interaction with MYC, thereby modulating oncogenic signaling pathways. The present study establishes a new structural framework for understanding the dynamics of MAX and provides a foundation for future structure-based drug design targeting the MYC/MAX axis. Finally, our work offers a strategic blueprint for investigating similarly challenging drug targets., This work was supported by grants PID2021-124297NB-C32, PID2021-124297NB-C33, PID-2024-157478NB-C32 and PID2024-157478NB-C33 funded by MCIN/AEI/10.13-039/501100011033 and the “Severo Ochoa” grant CEX2023-001263-S for Centers of Excellence awarded to ICMAB-CSIC. J.M. thanks the Generalitat de Catalunya for the support through the grant Grup de Recerca SGR-Cat2021 Condensed, Complex and Quantum Matter Group reference 2021SGR-01411 and to the Polytechnic University of Catalonia-Barcelona Tech through the funding AGRUPS. The authors thankfully acknowledge computer resources from MareNostrum5 supercomputer as well as technical support provided by BSC under project number RES-BCV-2025-1-0008., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Probing the structural dynamics of the unbound MAX protein: insights from well-tempered metadynamics

  • Lu, Huixia
  • Martí Rabassa, Jordi
  • Faraudo Gener, Jordi
One of most relevant challenges in tumorigenesis is the association of MYC and MAX proteins, whose related cancers remain undrugged. In particular, the disordered regions shown by those oncogenes make their structural characterization and the development of new drugs a truly hard task. To address these challenges, we employed the enhanced-sampling well-tempered metadynamics method to systematically explore the conformational space of the unbound MAX protein. Our results revealed, for the first time, a well-defined and thermodynamically favorable conformation of monomeric MAX. This is a remarkable finding, as it demonstrates that regions of MAX previously considered persistently disordered are capable of adopting stable, folded structures under specific conditions. Moreover, our findings also suggest that the metastable structural motifs observed in this work may harbor druggable sites, particularly relevant for strategies aiming to target MAX directly or to disrupt its interaction with MYC, thereby modulating oncogenic signaling pathways. The present study establishes a new structural framework for understanding the dynamics of MAX and provides a foundation for future structure-based drug design targeting the MYC/MAX axis. Finally, our work offers a strategic blueprint for investigating similarly challenging drug targets., This work was supported by grants PID2021-124297NB-C32, PID2021-124297NB-C33, PID-2024-157478NB-C32 and PID2024-157478NB-C33 funded by MCIN/AEI/10.13-039/501100011033 and the “Severo Ochoa” grant CEX2023-001263-S for Centers of Excellence awarded to ICMAB-CSIC. J.M. thanks the Generalitat de Catalunya for the support through the grant Grup de Recerca SGR-Cat2021 Condensed, Complex and Quantum Matter Group reference 2021SGR-01411 and to the Polytechnic University of Catalonia-Barcelona Tech through the funding AGRUPS. The authors thankfully acknowledge computer resources from MareNostrum5 supercomputer as well as technical support provided by BSC under project number RES-BCV-2025-1-0008., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ammonia capture in rhodium(II)-based metal-organic polyhedra via synergistic coordinative and H-bonding interactions

  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Rookard, Tanner
  • Flood, Christopher J.
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • Maspoch, Daniel|||0000-0003-1325-9161
Ammonia (NH) is among the world's most widely produced bulk chemicals, given its extensive use in diverse sectors such as agriculture; however, it poses environmental and health risks at low concentrations. Therefore, there is a need for developing new technologies and materials to capture and store ammonia safely. Herein, we report for the first time the use of metal-organic polyhedra (MOPs) as ammonia adsorbents. We evaluated three different rhodium-based MOPs: [Rh(bdc)] (where bdc is 1,3-benzene dicarboxylate); one functionalized with hydroxyl groups at its outer surface [Rh(OH-bdc)] (where OH-bdc is 5-hydroxy-1,3-benzene dicarboxylate); and one decorated with aliphatic alkoxide chains at its outer surface [Rh(CO-bdc)] (where CO-bdc is 5-dodecoxybenzene-1,3-benzene dicarboxylate). Ammonia-adsorption experiments revealed that all three Rh-MOPs strongly interact with ammonia, with uptake capacities exceeding 10 mmol/g. Furthermore, computational and experimental data showed that the mechanism of the interaction between Rh-MOPs and ammonia proceeds through a first step of coordination of NH to the axial site of the Rh(II) paddlewheel cluster, which triggers the adsorption of additional NH molecules through H-bonding interaction. This unique mechanism creates H-bonded clusters of NH on each Rh(II) axial site, which accounts for the high NH uptake capacity of Rh-MOPs. Rh-MOPs can be regenerated through their immersion in acidic water, and upon activation, their ammonia uptake can be recovered for at least three cycles. Our findings demonstrate that MOPs can be used as porous hosts to capture corrosive molecules like ammonia, and that their surface functionalization can enhance the ammonia uptake performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

(Bio)Functionalisation of Metal-Organic Polyhedra by Using Click Chemistry

  • Hernández López, Laura|||0000-0001-6394-2538
  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Cortés-Martínez, Alba|||0000-0003-1679-5955
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Caules, Caterina
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
The surface chemistry of Metal-Organic Polyhedra (MOPs) is crucial to their physicochemical properties because it governs how they interact with external substances such as solvents, synthetic organic molecules, metal ions, and even biomolecules. Consequently, the advancement of synthetic methods that facilitate the incorporation of diverse functional groups onto MOP surfaces will significantly broaden the range of properties and potential applications for MOPs. This study describes the use of copper(I)-catalysed, azide-alkyne cycloaddition (CuAAC) click reactions to post-synthetically modify the surface of alkyne-functionalised cuboctahedral MOPs. To this end, a novel Rh(II)-based MOP with 24 available surface alkyne groups was synthesised. Each of the 24 alkyne groups on the surface of the "clickable" Rh-MOP can react with azide-containing molecules at room temperature, without compromising the integrity of the MOP. The wide substrate catalogue and orthogonal nature of CuAAC click chemistry was exploited to densely functionalise MOPs with diverse functional groups, including polymers, carboxylic and phosphonic acids, and even biotin moieties, which retained their recognition capabilities once anchored onto the surface of the MOP.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Porous and Meltable Metal-Organic Polyhedra for the Generation and Shaping of Porous Mixed-Matrix Composites

  • von Baeckmann, Cornelia|||0000-0002-2337-9063
  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Suárez del Pino, Jose Antonio|||0000-0001-5469-8959
  • Meng, Lingxin
  • Garcia-Masferrer, Joan
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Sort, Jordi|||0000-0003-1213-3639
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Maspoch, Daniel|||0000-0003-1325-9161
Here, we report the synthesis of BCN-93, a meltable, functionalized, and permanently porous metal-organic polyhedron (MOP) and its subsequent transformation into amorphous or crystalline, shaped, self-standing, transparent porous films via melting and subsequent cooling. The synthesis entails the outer functionalization of a MOP with meltable polymer chains: in our model case, we functionalized a Rh(II)-based cuboctahedral MOP with poly(ethylene glycol). Finally, we demonstrate that once melted, BCN-93 can serve as a porous matrix into which other materials or molecules can be dispersed to form mixed-matrix composites. To illustrate this, we combined BCN-93 with one of various additives (either two MOF crystals, a porous cage, or a linear polymer) to generate a series of mixed-matrix films, each of which exhibited greater CO uptake relative to the parent film.