Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unconventional Ferroelectric Switching via Local Domain Wall Motion in Multiferroic ε‐Fe2O3 Films

  • Guan, Xiangxiang
  • Yao, Lide
  • Rushchanskii, Konstantin Z.
  • Inkinen, Sampo
  • Yu, Richeng
  • Ležaić, Marjana
  • Sánchez Barrera, Florencio
  • Gich, Martí
  • Dijken, Sebastiaan van
Deterministic polarization reversal in ferroelectric and multiferroic films is critical for their exploitation in nanoelectronic devices. While ferroelectricity has been studied for nearly a century, major discrepancies in the reported values of coercive fields and saturation polarization persist in literature for many materials. This raises questions about the atomic‐scale mechanisms behind polarization reversal. Unconventional ferroelectric switching in ε‐Fe2O3 films, a material that combines ferrimagnetism and ferroelectricity at room temperature, is reported. High‐resolution in situ scanning transmission electron microscopy experiments and first‐principles calculations demonstrate that polarization reversal in ε‐Fe2O3 occurs around pre‐existing domain walls only, triggering local domain wall motion in moderate electric fields of 250–500 kV cm−1. Calculations indicate that the activation barrier for switching at domain walls is nearly a quarter of that corresponding to the most likely transition paths inside ε‐Fe2O3 domains. Moreover, domain walls provide symmetry lowering of the polar structure near the domain boundary, which is shown to be necessary for ferroelectric switching in ε‐Fe2O3. Local polarization reversal in ε‐Fe2O3 limits the macroscopic ferroelectric response and offers important hints on how to tailor ferroelectric properties by domain structure design in other relevant ferroelectric materials., This work was supported by the Academy of Finland (Grant Nos. 293929, 304291, 319218 and 316857) and by the European Research Council (ERC‐2012‐StG 307502 and ERC‐2018‐CoG 819623). STEM analysis was conducted at the Aalto University OtaNano‐Nanomicroscopy Center (Aalto‐NMC). ICMAB acknowledges financial support from the Spanish Ministry of Economy, Competitiveness and Universities, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐ 2015‐0496) and the project MAT2017‐85232‐R co‐financed with the EU FEDER program, as well as the Generalitat de Catalunya (projects 2017SGR1377 and 2017SGR765). The authors thank Jaume Gàzquez for discussions about the work and critical reading of the manuscript. K.Z.R. and M.L. gratefully acknowledge the financial support by Deutsche Forschungsgemeinschaft (DFG) through DFG‐ANR GALIMEO project (LE 2504/2‐1), as well as the support of Jülich Supercomputing Centre (JSC, project jiff38) and JARA‐HPC Partition (projects jara0081 and jara0126). R.C.Y. and X.X.G. acknowledge the financial support by the National Key Research Program of China (Grant No. 2017YFA0206200) and the National Natural Science Foundation of China (Grant No. 11874413). We thank Prof. Nathalie Viart for valuable discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic properties of Cr-substituted ε-(Fe1-xCrx)2O3 nanoparticles with epsilon structure

  • Ma, Zheng
  • Romaguera, Arnau
  • Fauth, François
  • Herrero Martín, Javier
  • García Muñoz, Josep Lluís
  • Gich, Martí
ε-Fe2O3 has gained considerable interest due to its intriguing properties and great application potentials. In this work ε-(Fe1−xCrx)2O3 (x = 0, 0.03, 0.075) nanoparticles encapsulated in silica have been successfully prepared by sol–gel chemistry. Synchrotron diffraction confirms that the polar Pna21 structure of ε-Fe2O3 is robust against the substitution of Fe by Cr. The incorporation of chromium is accompanied by a softer magnetic behaviour, and also a gradual decrease in the ferromagnetic signal associated to the super-hard FM2 ferrimagnetic phase. While the Cr substitution has little impact on the low temperature incommensurate transition, it is found that Cr substitution shifts the super-hard and soft ferrimagnetic transitions (respectively, TN2 and TN1) to notably lower temperatures., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. [819623]). We also acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MINCIU), through Project No. RTI2018-098537-B-C21, cofunded by ERDF from EU, and “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496) and from Generalitat de Catalunya through the projects 2017SGR00765 and 2017SGR1632. Z.M. was financially supported by China Scholarship Council (CSC) with No. 201606070094. Z.M’s work was done as a part of the Ph.D program in Materials Science at Universitat Autònoma de Barcelona. We also acknowledge ALBA synchrotron (exp. No. 2018093113) for provision of beam time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic properties of synthetic fluorophlogopite mica crystals

  • Ma, Zheng
  • Skumryev, Vassil
  • Gich, Martí
Micas have recently attracted the interest of materials scientists to be used as flexible substrates for the growth of nanomaterials. Synthetic fluorophlogopite is particularly appealing due to its high thermal stability and a significantly lower level of impurities compared to natural mica. Perhaps because of such high purity, little attention has been given to its magnetic properties, assumed to be diamagnetic. Herein, we report an in-depth study of the magnetic properties of commercial fluorophlogopite mica crystals as a function of magnetic field and temperature. Our study shows that the magnetic response of mica comprises diamagnetic and paramagnetic components. The latter is quite significant at low temperatures and can be analyzed within the framework of Curie's law and the Langevin theory, which indicate that it originates from isolated magnetic cations. Hence, special care must be taken to study the magnetic properties of mica-supported nanostructures. We propose a protocol to correct the magnetic contributions of mica substrates which can be useful in future developments of flexible magnetic devices., The authors thank Michael Mikhov for his useful comments regarding the analysis of the data. This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no. [819623]). We also acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MINCIU), through Project No. RTI2018-098537-B-C21, cofunded by ERDF from EU, and “Severo Ochoa” Programme for Centres of Excellence in R&D (Grant No. SEV-2015-0496) and from Generalitat de Catalunya through the projects 2017SGR00765 and 2017SGR1632. The authors also acknowledge Bernat Bozzo, Maite Simón, Vega Lloveras, Francisco Javier Campos and Anna Crespi from the Scientific Services at ICMAB-CSIC and Ignasi Villarroya from the Chemical Analysis Service at UAB. Z. M. was financially supported by China Scholarship Council (CSC) with No. 201606070094. Z. M.'s work was done as a part of the PhD program in Materials Science at Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetoelastic coupling behaviour of nanocrystalline e-Fe2O3

  • Haines, Charles R.S.
  • Gich, Martí
  • García Muñoz, Josep Lluís
  • Romaguera, Arnau
  • Ma, Zheng
  • Costa, Marcos B.
  • Carpenter, Michael A.
Preparation of a ceramic sample which preserved the nanoscale grain sizes of ∼10–30 nm has allowed elastic and anelastic properties of ε-Fe2O3 to be investigated as functions of temperature and magnetic field strength by Resonant Ultrasound Spectroscopy in the frequency range ∼0.1–1 MHz. Formal analysis of spontaneous strains, e, from previously obtained high resolution lattice parameter data confirmed that magnetic ordering below ∼500 K is accompanied by strains of up to ∼±0.002 due to coupling with the order parameter, m, according to λem2. However, this coupling does not result in elastic softening that would be expected if the order parameter relaxed in response to an induced strain on the timescale of the acoustic resonances. Stiffening or softening during heating through ∼450–480 K of the initial as prepared material, which acquired a distinct magnetisation parallel to the stress applied during Spark Plasma Sintering, is attributed to changes in magnetic domain configurations involving preferred local alignments of individual moments of monodomain crystals. The crystallographic space group, Pna21, and magnetic space group at room temperature, Pna'21', allow ε-Fe2O3 to be both piezoelectric and piezomagnetic. It is postulated that changes in the effective coefficients of these properties for bulk samples are responsible for the observed variations in acoustic resonance frequencies according to the magnetic domain structure present. No elastic or anelastic anomalies were observed at the commensurate-incommensurate transition near 110 K. Instead, acoustic resonance frequencies changed in response to an applied magnetic field, consistent with viscous motion of magnetic domain walls and the effect of poling on piezo coefficients. Ceramic samples of ε-Fe2O3 could have potentially functional piezoelectric and/or piezomagnetic properties that are tunable by choice of magnetic and thermal history., This work was funded by grant no. RPG-2016-298 from the Leverhulme Trust. RUS facilities in Cambridge were established through grants from the Natural Environment Research Council (Grants No. NE/B505738/1 and No. NE/F017081/1) and the Engineering and Physical Sciences Research Council (Grant No. EP/I036079/1) to MAC. We also acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (Grants No. RTI2018-098537-B-C21, cofunded by ERDF from EU, and FUNFUTURE (CEX2019-000917-S)) and funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 819623). ALBA synchrotron is also acknowledged. Support is acknowledged from the European Union Horizon 2020 Research and Innovation Programme under Marie Skłodowska-Curie grant 861046 (BIOREMIA) for MBC., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rare-Earth Silicates as High-Temperature Surfactants for the Controlled Synthesis of ε-Fe2O3 Nanoparticles

  • Khanam, Naureen
  • Ma, Zheng
  • Ortiz Ropero, Sergi
  • Dix, Nico
  • Vila Costa, Ana
  • Oró, Judith
  • García Muñoz, Josep Lluís
  • Faraudo, Jordi
  • Gich, Martí
The functional properties of nanocrystals can be finely tuned through controlled morphology and size. However, this can be challenging for metastable nanostructures that require harsh synthesis conditions, such as high temperatures. Here, we present a method for preparing large ε-Fe2O3 nanorods that are not affected by magnetic relaxation. This study presents a novel growth mechanism in which high-aspect-ratio rods evolve from spherical ε-Fe2O3 particles in a silica matrix containing Y3+. With the presence of Y3+, the glassy matrix undergoes a metastable binodal decomposition yielding the formation of nanodroplets of a Y-rich silicate of composition ∼Y2Si2O7. This Y silicate selectively coats the ε-Fe2O3 planes perpendicular to the rod axis along the [100] direction but is not observed in the rod apexes. Structural optimizations and energy calculations of different crystal faces of ε-Fe2O3 in contact with Y2Si2O7 obtained using machine-learning force fields provide an atomistic interpretation of these observations: the affinity of Y with the oxygen atoms exposed at ε-Fe2O3 surfaces explains the preferential capping of ε-Fe2O3 surfaces that present a large density of oxygen atoms and its absence in surfaces such as (100), where this density is significantly lower. The presence or absence of the silicate capping layer results in different surface energies and/or mass transfer coefficients across the interface, originating two independent Ostwald ripening processes, which drive the high aspect ratio growth. By using La3+ instead of Y3+, ε-Fe2O3 rods with even larger aspect ratios are obtained. Notably, this synthetic approach counteracts the progressive diminution of the average nanoparticle size observed in ε-(Fe1-xCrx)2O3 upon Cr3+ addition, enabling to elucidate the effect of this substitution on the intrinsic magnetic anisotropy and the anisotropy fields that determine the high-frequency ferromagnetic resonances of this phase., This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 and Horizon Europe research and innovation programs, grant agreement nos. #819623 and #101138458, respectively. Financial support from the Spanish Agencia Estatal de Investigación (MICIU/AEI/10.13039/5011000110033) through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2023-001263-S), and projects PID2021124734OB-C22 and PID2021-124297NB-C33, as well as the Generalitat de Catalunya (2021SGR00446), is acknowledged. The authors acknowledge the use of instrumentation and the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16014206 (METCAM-FIB) to ICN2 by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. The METCAM operators K. Gupta and B. Mundet are also acknowledged. The MSPD beamline (BL04) of the ALBA synchrotron provided beamtime access to perform powder XRD measurements (2019093918, 2023027535-2, and 2022097060-3), and we are grateful for the assistance of F. Fauth and C. Popescu. We acknowledge the assistance of the ICMAB-CSIC Scientific & Technical Services: Electron Microscopy service (J. Oró) and X-ray diffraction service (J. Esquius, X. Campos, and A. Crespi). We thank Dr. Pablo Guardia from ICMAB-CSIC for his relevant suggestions concerning reverse micelle synthesis. We are also grateful to Prof. Chris Lorenz from King’s College for insightful advice regarding machine-learning force fields., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the functional properties of ternary Ag@PEG@Mg-ZnFe2O4 nanocomposite for low-frequency electronics, and ferromagnetic resonance (FMR) applications

  • Perveen, Saima
  • Mustafa, Ghulam
  • Dix, Nico
  • Vila Costa, Ana
  • Gich, Martí
  • Azad, Fahad
The pursuit of high-performance low-frequency electronics and magnetically tunable devices has increased the demand for multifunctional nanocomposites with controlled magnetic and dielectric properties. This study explores the potential of ternary Ag@PEG@Mg-ZnFe<inf>2</inf>O<inf>4</inf> nanocomposite in comparison to pristine Mg-ZnFe<inf>2</inf>O<inf>4</inf>, Ag@Mg-ZnFe<inf>2</inf>O<inf>4</inf> and PEG@Mg-ZnFe<inf>2</inf>O<inf>4</inf> for low-frequency energy storage and microwave applications. X-ray diffraction (XRD) was employed to study the phase purity and structural properties of the binary and ternary nanocomposites. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) were utilized to confirm carbon-related functional groups and the electronic state of silver in the nanocomposite, respectively. The morphological analysis disclosed the role of polyethylene glycol in controlling the agglomeration of silver and Mg-ZnFe<inf>2</inf>O<inf>4</inf> phases in the nanocomposite. Functional properties of Ag@PEG@Mg-ZnFe<inf>2</inf>O<inf>4</inf> exhibit substantial dielectric permittivity with minimal tangent loss (δ) and low charge transfer resistance, alongside soft-magnetic superparamagnetic-like behavior with very low coercivity. Given the relevance of magnetic composites in microwave communication applications, ferromagnetic resonance spectroscopy was conducted up to 40 GHz with an external magnetic field applied. Results indicate that the ternary Ag@PEG@Mg-ZnFe<inf>2</inf>O<inf>4</inf> nanocomposite maintains a response comparable to pure Mg-ZnFe<inf>2</inf>O<inf>4</inf>. This investigation envisions the dual use of the synthesized ternary Ag@PEG@Mg-ZnFe<inf>2</inf>O<inf>4</inf> nanocomposite in low-frequency energy storage electronics and ferromagnetic microwave communication applications., Saima Perveen would like to thank the International Research Support Initiative Program (IRSIP) of HEC for their fellowship supporting a research stay at ICMAB-CSIC. We acknowledge the assistance of ICMAB-CSIC Scientific & Technical Services: Electron Microscopy (A.-E. Carrillo and J. Oró), and XPS service of the Catalan Institute of Nanoscience and Nanotechnology (G. Sauthier). This study received funding from the European Research Council (ERC) through the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. [819623])., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed