Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hierarchical Surface Pattern on Ni-Free Ti-Based Bulk Metallic Glass to Control Cell Interactions

  • Cai, Fei-Fan|||0000-0002-4857-6274
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Costa, Miguel B.|||0000-0003-0440-3774
  • Schweiger, Lukas
  • Sarac, Baran|||0000-0002-0130-3914
  • Greer, A. Lindsay|||0000-0001-7360-5439
  • Schroers, Jan|||0000-0001-5877-6782
  • Teichert, Christian|||0000-0002-0796-2355
  • Nogués, Carme|||0000-0002-6361-8559
  • Spieckermann, Florian|||0000-0003-4836-3284
  • Eckert, Jürgen|||0000-0003-4112-3181
Ni-free Ti-based bulk metallic glasses (BMGs) are exciting materials for biomedical applications because of their outstanding biocompatibility and advantageous mechanical properties. The glassy nature of BMGs allows them to be shaped and patterned via thermoplastic forming (TPF). This work demonstrates the versatility of the TPF technique to create micro- and nano-patterns and hierarchical structures on TiZrCuPdSn BMG. Particularly, a hierarchical structure fabricated by a two-step TPF process integrates 400 nm hexagonal close-packed protrusions on 2.5 µm square protuberances while preserving the advantageous mechanical properties from the as-cast material state. The correlations between thermal history, structure, and mechanical properties are explored. Regarding biocompatibility, TiZrCuPdSn BMGs with four surface topographies (flat, micro-patterned, nano-patterned, and hierarchical-structured surfaces) are investigated using Saos-2 cell lines. Alamar Blue assay and live/dead analysis show that all tested surfaces have good cell proliferation and viability. Patterned surfaces are observed to promote the formation of longer filopodia on the edge of the cytoskeleton, leading to star-shaped and dendritic cell morphologies compared with the flat surface. In addition to potential implant applications, TPF-patterned Ti-BMGs enable a high level of order and design flexibility on the surface topography, expanding the available toolbox for studying cell behavior on rigid and ordered surfaces. A hierarchical structure integrating nano-scale protrusions on micro-scale protuberances is achieved on Ni-free Ti-based bulk metallic glasses via a two-step thermoplastic forming technique. The patterned materials preserve advantageous mechanical properties and biocompatibility from the as-cast materials. However, the surface features change the cell morphology. Besides implant applications, this work realizes a strategy for studying cell behavior on rigid ordered surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cytocompatibility and antimicrobial properties of silver nanoparticle-decorated hydroxyapatite-coated TiMoNbTa alloy

  • Escobar, Michael|||0000-0002-5813-3370
  • Turner, Adam Benedict|||0000-0002-4485-6738
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Pellicer, Eva|||0000-0002-8901-0998
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Trobos, Margarita|||0000-0002-9253-6771
Titanium and its alloys are widely used for implants, although they have limitations like higher elastic modulus compared to bone, causing stress shielding and potential implant failure. To address these issues, β-Ti alloys and calcium phosphate coatings are being developed to improve the mechanical properties while enhancing bone integration. The risk of infection is another important limitation that can be addressed through the deposition of antibacterial and antibiofilm coatings on the alloys. Here, we present a β-Ti alloy (Ti-18Mo-6Nb-5Ta (wt %)) coated with calcium-deficient hydroxyapatite (CDHA) and decorated with silver nanoparticles intended to be used as antimicrobial orthopedic implants. The experiments revealed that human osteoblasts were able to adhere and proliferate on coating. The presence of silver nanoparticles did not adversely affect human osteoblast differentiation and led to a 50 % increase in type I collagen production. The coating decorated with silver nanoparticles exhibited a significant antibacterial effect against Staphylococcus aureus, reducing biofilm formation by over 40 % after 24 h compared to the undecorated coating. Taken together, these results show the effectiveness of the silver decorated CDHA coating in enhancing osteoblasts proliferation and differentiation while also reducing biofilm growth when compared to CDHA coating.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Role of sodium salicylate in Staphylococcus aureus quorum sensing, virulence, biofilm formation and antimicrobial susceptibility

  • Turner, Adam Benedict
  • Gerner, Erik
  • Firdaus, Rininta
  • Echeverz Sarasúa, Maite
  • Werthén, María
  • Thomsen, Peter
  • Almqvist, Sofía
  • Trobos, Margarita
The widespread threat of antibiotic resistance requires new treatment options. Disrupting bacterial communication, quorum sensing (QS), has the potential to reduce pathogenesis by decreasing bacterial virulence. The aim of this study was to investigate the influence of sodium salicylate (NaSa) on Staphylococcus aureus QS, virulence production and biofilm formation. In S. aureus ATCC 25923 (agr III), with or without serum, NaSa (10 mM) downregulated the agr QS system and decreased the secretion levels of alpha-hemolysin, staphopain A and delta-hemolysin. Inhibition of agr expression caused a downregulation of delta-hemolysin, decreasing biofilm dispersal and increasing biofilm formation on polystyrene and titanium under static conditions. In contrast, NaSa did not increase biofilm biomass under flow but caused one log10 reduction in biofilm viability on polystyrene pegs, resulting in biofilms being twice as susceptible to rifampicin. A concentrationdependent effect of NaSa was further observed, where high concentrations (10 mM) decreased agr expression, while low concentrations (≤0.1 mM) increased agr expression. In S. aureus 8325-4 (agr I), a high concentration of NaSa (10 mM) decreased hla expression, and a low concentration of NaSa (≤1 mM) increased rnaIII and hla expression. The activity of NaSa on biofilm formation was dependent on agr type and material surface. Eight clinical strains isolated from prosthetic joint infection (PJI) or wound infection belonging to each of the four agr types were evaluated. The four PJI S. aureus strains did not change their biofilm phenotype with NaSa on the clinically relevant titanium surface. Half of the wound strains (agr III and IV) did not change the biofilm phenotype in the 3D collagen wound model. In addition, compared to the control, ATCC 25923 biofilms formed with 10 mM NaSa in the collagen model were more susceptible to silver. It is concluded that NaSa can inhibit QS in S. aureus, decreasing the levels of toxin production with certain modulation of biofilm formation. The effect on biofilm formation was dependent on the strain and material surface. It is suggested that the observed NaSa inhibition of bacterial communication is a potential alternative or adjuvant to traditional antibiotics., This research was funded by the Swedish Foundation for Strategic Research (SSF; RMA15-0110 2016), Mölnlycke Health Care AB (Sweden), the European Commission within the H2020-MSCA grant agreement no. 861046 (BIOREMIA-ETN), the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement No: 754412 (MoRE2020— Region Västra Götaland), CARe—Centre for Antibiotic Resistance Research at University of Gothenburg; Swedish Research Council (2018–02891), the Swedish state under the agreement between the Swedish government and the county councils, the ALF agreement (ALFGBG-725641), the IngaBritt and Arne Lundberg Foundation (LU2021- 0048), the Hjalmar Svensson Foundation; the Doctor Felix Neuberghs Foundation, the Adlerbertska Foundation, and the Area of Advance Materials of Chalmers/GU Biomaterials within the Strategic Research Area initiative launched by the Swedish government.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Biofilm morphology and antibiotic susceptibility of methicillin-resistant Staphylococcus aureus (MRSA) on poly-D,L-lactide-co-poly(ethylene glycol) (PDLLA-PEG) coated titanium

  • Turner, Adam Benedict
  • Zermeño-Pérez, David
  • Mysior, Margaritha M.
  • Giraldo-Osorno, Paula Milena
  • García Martínez, Begoña
  • O'Gorman, Elizabeth
  • Oubihi, Shafik
  • Simpson, Jeremy C.
  • Lasa Uzcudun, Íñigo
  • Ó'Cróinín, Tadhg
  • Trobos, Margarita
Biodegradable polymeric coatings are being explored as a preventive strategy for orthopaedic device-related infection. In this study, titanium surfaces (Ti) were coated with poly-D,L-lactide (PDLLA, (P)), polyethylene-glycol poly-D,L-lactide (PEGylated-PDLLA, (PP20)), or multi-layered PEGylated-PDLLA (M), with or without 1 % silver sulfadiazine. The aim was to evaluate their cytocompatibility, resistance to Staphylococcus aureus biofilm formation, and their potential to enhance the susceptibility of any biofilm formed to antibiotics. Using automated high-content screening confocal microscopy, biofilm formation of a clinical methicillin-resistant Staphylococcus aureus (MRSA) isolate expressing GFP was quantified, along with isogenic mutants that were unable to form polysaccharidic or proteinaceous biofilm matrices. The results showed that PEGylated-PDLLA coatings exhibited significant antibiofilm properties, with M showing the highest effect. This inhibitory effect was stronger in S. aureus biofilms with a matrix composed of proteins compared to those with an exopolysaccharide (PIA) biofilm matrix. Our data suggest that the antibiofilm effect may have been due to (i) inhibition of the initial attachment through microbial surface components recognising adhesive matrix molecules (MSCRAMMs), since PEG reduces protein surface adsorption via surface hydration layer and steric repulsion; and (ii) mechanical disaggregation and dispersal of microcolonies due to the bioresorbable/degradable nature of the polymers, which undergo hydration and hydrolysis over time. The disruption of biofilm morphology by the PDLLA-PEG co-polymers increased S. aureus susceptibility to antibiotics like rifampicin and fusidic acid. Adding 1 % AgSD provided additional early bactericidal effects on both biofilm and planktonic S. aureus. Additionally, the coatings were cytocompatible with immune cells, indicating their potential to enhance bacterial clearance and reduce bacterial colonisation of titanium-based orthopaedic biomaterials., This research was funded by the European Commission within the H2020- MSCA grant agreement No. 861046 (BIOREMIA-ETN); Swedish Research Council (2022-00853); the Swedish state under the agreement between the Swedish government and the county councils; the ALF agreement (ALFGBG-978896); the IngaBritt and Arne Lundberg Foundation (LU2021-0048); the Hjalmar Svensson Foundation; the Doctor Felix Neuberghs Foundation; the Adlerbertska Foundation; the Area of Advance Materials of Chalmers/ GU Biomaterials within the Strategic Research Area initiative launched by the Swedish government; the Spanish Ministry of Science, Innovation and Universities grant PID2020-113494RB-I00 (Agencia Española de Investigación / Fondo Europeo de Desarrollo Regional , European Union) to I.L.; and S.O. was funded through the Government of Ireland Postgraduate Scholarship Programme by the Irish Research Council (GOIPG/2023/3290).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetoelastic coupling behaviour of nanocrystalline e-Fe2O3

  • Haines, Charles R.S.
  • Gich, Martí
  • García Muñoz, Josep Lluís
  • Romaguera, Arnau
  • Ma, Zheng
  • Costa, Marcos B.
  • Carpenter, Michael A.
Preparation of a ceramic sample which preserved the nanoscale grain sizes of ∼10–30 nm has allowed elastic and anelastic properties of ε-Fe2O3 to be investigated as functions of temperature and magnetic field strength by Resonant Ultrasound Spectroscopy in the frequency range ∼0.1–1 MHz. Formal analysis of spontaneous strains, e, from previously obtained high resolution lattice parameter data confirmed that magnetic ordering below ∼500 K is accompanied by strains of up to ∼±0.002 due to coupling with the order parameter, m, according to λem2. However, this coupling does not result in elastic softening that would be expected if the order parameter relaxed in response to an induced strain on the timescale of the acoustic resonances. Stiffening or softening during heating through ∼450–480 K of the initial as prepared material, which acquired a distinct magnetisation parallel to the stress applied during Spark Plasma Sintering, is attributed to changes in magnetic domain configurations involving preferred local alignments of individual moments of monodomain crystals. The crystallographic space group, Pna21, and magnetic space group at room temperature, Pna'21', allow ε-Fe2O3 to be both piezoelectric and piezomagnetic. It is postulated that changes in the effective coefficients of these properties for bulk samples are responsible for the observed variations in acoustic resonance frequencies according to the magnetic domain structure present. No elastic or anelastic anomalies were observed at the commensurate-incommensurate transition near 110 K. Instead, acoustic resonance frequencies changed in response to an applied magnetic field, consistent with viscous motion of magnetic domain walls and the effect of poling on piezo coefficients. Ceramic samples of ε-Fe2O3 could have potentially functional piezoelectric and/or piezomagnetic properties that are tunable by choice of magnetic and thermal history., This work was funded by grant no. RPG-2016-298 from the Leverhulme Trust. RUS facilities in Cambridge were established through grants from the Natural Environment Research Council (Grants No. NE/B505738/1 and No. NE/F017081/1) and the Engineering and Physical Sciences Research Council (Grant No. EP/I036079/1) to MAC. We also acknowledge financial support from the Spanish Ministry of Science, Innovation, and Universities (Grants No. RTI2018-098537-B-C21, cofunded by ERDF from EU, and FUNFUTURE (CEX2019-000917-S)) and funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 819623). ALBA synchrotron is also acknowledged. Support is acknowledged from the European Union Horizon 2020 Research and Innovation Programme under Marie Skłodowska-Curie grant 861046 (BIOREMIA) for MBC., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Proliferation and Differentiation of Human Osteoblasts by Remotely Controlled Magnetic-Field-Induced Electric Stimulation Using Flexible Substrates

  • Careta, Oriol
  • Nicolenco, Aliona
  • Perdikos, Filippos
  • Blanquer, Andreu
  • Ibáñez, Elena
  • Pellicer, Eva
  • Stefani, Christina
  • Sepúlveda, Borja
  • Nogués, Josep
  • Sort, Jordi
  • Nogués, Carme
With the progressive aging of the population, bone fractures are an increasing major health concern. Diverse strategies are being studied to reduce the recovery times using nonaggressive treatments. Electrical stimulation (either endogenous or externally applied electric pulses) has been found to be effective in accelerating bone cell proliferation and differentiation. However, the direct insertion of electrodes into tissues can cause undesirable inflammation or infection reactions. As an alternative, magnetoelectric heterostructures (wherein magnetic fields are applied to induce electric polarization) could be used to achieve electric stimulation without the need for implanted electrodes. Here, we develop a magnetoelectric platform based on flexible kapton/FeGa/P(VDF-TrFE) (flexible substrate/magnetostrictive layer/ferroelectric layer) heterostructures for remote magnetic-field-induced electric field stimulation of human osteoblast cells. We show that the use of flexible supports overcomes the clamping effects that typically occur when analogous magnetoelectric structures are grown onto rigid substrates (which preclude strain transfer from the magnetostrictive to the ferroelectric layers). The study of the diverse proliferation and differentiation markers evidence that in all the stages of bone formation (cell proliferation, extracellular matrix maturation, and mineralization), the electrical stimulation of the cells results in a remarkably better performance. The results pave the way for novel strategies for remote cell stimulation based on flexible platforms not only in bone regeneration but also in many other applications where electrical cell stimulation may be beneficial (e.g., neurological diseases or skin regeneration)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreements no. 861046 and no. 861145 (Bioremia and BeMAGIC European Training Networks), grants PID2020-116844RB-C21, PID2020 116844RB-C22, and PID2019-106229RB-I00 funded by MCIN/AEI/10.13039/501100011033 and the Generalitat de Catalunya (2021-SGR-00651, 2021-SGR-00122). We also acknowledge the European Research Council (2021-ERC-Advanced REMINDS grant no. 101054687). A.N. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 892661-MAGNUS. A.B. has received funding from a postdoctoral fellowship within the Beatriu de Pinós programme, funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under Marie Sklodowska-Curie grant agreement no. 801370. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors would like to thank the staff from the Servei de Microscòpia of Universitat Autònoma de Barcelona. The authors also want to thank Iris Nogués for preparing Scheme 1 and Nicolau López-Pintó for his help in growing some of the samples., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Biodegradable porous FeMn(-xAg) alloys, assessment of cytocompatibility, mechanical, magnetic and antibiofilm properties

  • Bartkowska, Aleksandra|||0000-0002-6133-7155
  • Careta, Oriol|||0000-0003-1333-0300
  • Turner, Adam Benedict|||0000-0002-4485-6738
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Trobos, Margarita|||0000-0002-9253-6771
  • Nogués, Carme|||0000-0002-6361-8559
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
In this work, porous FeMn(-xAg) alloys are fabricated through powder metallurgy methods. The effects of porosity and Ag addition on the microstructure, biodegradability, magnetic and mechanical properties of the alloys are investigated. Studies on the cytocompatibility, inflammatory cytokine response and antibacterial effect are also conducted. The fabricated alloys exhibit a macro- and nanoporous structure, with uniformly distributed silver particles. The biodegradability tests reveal that the release of Mn to the Hank's solution is higher than that of Fe, without significant differences between the alloys. The degradation products consist mainly of Fe, Mn, O and compounds enriched in Ca, P and Cl. As-sintered alloys show a low saturation magnetization value (below 1 emu g-1), which does not increase significantly with immersion time. The results on biocompatibility indicate that all tested alloys are non-cytotoxic, but the addition of Ag might interfere with cell proliferation. However, the ions released by the FeMn(-xAg) alloys do not induce an inflammatory response in macrophages. The obtained results on microbiological interactions reveal that although no significant bactericidal effect is observed at 4 h between FeMn control and FeMn-5Ag, a significant reduction in the total biofilm biomass of both live and dead bacteria is observed after 24 h in Ag containing FeMn-5Ag surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface Modified β-Ti-18Mo-6Nb-5Ta (wt%) Alloy for Bone Implant Applications, Composite Characterization and Cytocompatibility Assessment

  • Escobar, Michael|||0000-0002-5813-3370
  • Careta, Oriol|||0000-0003-1333-0300
  • Fernández Navas, Nora
  • Bartkowska, Aleksandra|||0000-0002-6133-7155
  • Ludovico, Andrea Alberta|||0000-0002-6249-1146
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Gemming, Thomas|||0000-0002-7353-595X
  • Gebert, Annett|||0000-0003-2748-3850
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Nogués, Carme|||0000-0002-6361-8559
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Commercially available titanium alloys such as Ti-6Al-4V are established in clinical use as load-bearing bone implant materials. However, concerns about the toxic effects of vanadium and aluminum have prompted the development of Al- and V-free β-Ti alloys. Herein, a new alloy composed of non-toxic elements, namely Ti-18Mo-6Nb-5Ta (wt%), has been fabricated by arc melting. The resulting single β-phase alloy shows improved mechanical properties (Young's modulus and hardness) and similar corrosion behavior in simulated body fluid when compared with commercial Ti-6Al-4V. To increase the cell proliferation capability of the new biomaterial, the surface of Ti-18Mo-6Nb-5Ta was modified by electrodepositing calcium phosphate (CaP) ceramic layers. Coatings with a Ca/P ratio of 1.47 were obtained at pulse current densities, -j, of 1.8-8.2 mA/cm 2, followed by 48 h of NaOH post-treatment. The thickness of the coatings has been measured by scanning electron microscopy from an ion beam cut, resulting in an average thickness of about 5 μm. Finally, cytocompatibility and cell adhesion have been evaluated using the osteosarcoma cell line Saos-2, demonstrating good biocompatibility and enhanced cell proliferation on the CaP-modified Ti-18Mo-6Nb-5Ta material compared with the bare alloy, even outperforming their CaP-modified Ti-6-Al-4V counterparts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Silver-induced γ→ε martensitic transformation in FeMn alloys, an experimental and computational study

  • Bartkowska, Aleksandra|||0000-0002-6133-7155
  • Lekka, Christina|||0000-0001-9737-134X
  • Ludovico, Andrea Alberta|||0000-0002-6249-1146
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Porous FeMn alloys with additions of 0, 1, 3 and 5 wt.% of Ag were fabricated using powder metallurgy and sintering. The microstructure of the fabricated alloys was characterized using X-ray diffraction, transmission electron microscopy and selected area electron diffraction. While equiatomic FeMn and FeMn-1Ag alloys possess a fully austenitic structure, a change in the crystallographic structure is observed upon addition of 3 and 5 wt.% of Ag, where a mixture of γ austenite and ε martensite phases is observed. Compression tests reveal that such structural transition causes an increase of the yield stress. The evolution of microstructure with the Ag content can be understood from theoretical calculations which show that Ag atoms prefer the intrinsic stacking fault (ISF) sites, revealing lower energy for the ε-like atomic plane sequence. This causes local depletion of the electronic charge, therefore weakening the interatomic bonds at the ISF plane and facilitating the phase transition. In addition, the total energy difference between the γ and ε phases decreases upon Ag addition. This enables the coexistence of both phases in the sample with 5 wt.% Ag. Both experimental and theoretical data agree that the magnetization value gradually increases upon Ag addition. This is due to the local stress that is introduced by Ag atoms, which expand the Ag-Fe and Ag-Mn first neighbour interatomic bonds compared to FeMn. This stress results in electronic charge that locally alters the Fe and Mn atomic magnetic moments. These results are appealing for the design of FeMn-based alloys with tuneable phase composition and physical properties for several technological applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Accelerated biodegradation of FeMn porous alloy coated with ZnO, Effect on cytocompatibility and antibiofilm properties

  • Bartkowska, Aleksandra|||0000-0002-6133-7155
  • Turner, Adam Benedict|||0000-0002-4485-6738
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Trobos, Margarita|||0000-0002-9253-6771
  • Nogués, Carme|||0000-0002-6361-8559
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Fe-based alloys are being studied as potential candidates for biodegradable implants; however, their degradation rates remain too slow. To accelerate biodegradation while simultaneously hindering biofilm formation, a ZnO coating was deposited onto porous equiatomic FeMn alloy discs by sol-gel method using dip coating. The effect of the ZnO coating on the microstructure, biodegradability, cytocompatibility, and antibacterial properties were investigated. Biodegradability experiments were performed by immersing the specimens in Hank's balanced salt solution and measuring ion release after up to 28 days of immersion. The experiments showed an increased degradation of the FeMn/ZnO sample due to Fe segregation towards the grain boundaries, formation of iron-manganese oxide, and limited formation of degradation products on ZnO. Further, indirect Saos-2 cell cytotoxicity testing in 24 h sample-conditioned media showed no significant cytotoxicity in concentrations equal to or below 50 %. In addition, the total biofilm biovolume formed by Staphylococcus aureus on the FeMn/ZnO surface was significantly reduced compared to the uncoated FeMn. Taken together, these results show that the ZnO coating on FeMn improves the degradation rate, maintains cytocompatibility, and reduces biofilm accumulation when compared to an uncoated FeMn alloy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

One and two-step electrodeposition of composite films of calcium-deficient hydroxyapatite matrix with nanoscale Ag- and Zn-based particles

  • Escobar, Michael|||0000-0002-5813-3370
  • Hoffmann, Volker|||0000-0001-8084-6476
  • Gemming, Thomas|||0000-0002-7353-595X
  • Kim, Minsoo|||0000-0002-3478-1277
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
A fundamental study regarding the electrochemical synthesis of composite coatings with application in the orthopaedic field has been conducted. In particular, the electrodeposition of calcium phosphate coatings with Ag nanoparticles (AgNPs) from either a single electrolyte (one-step, 1S) or two electrolytes (two-step, 2S) on a β-Ti alloy (Ti-18Mo-6Nb-4Ta in wt%) was investigated. Pulse current deposition was implemented to produce the composite coatings by the 1S approach from a simple solution containing 42 mM Ca(NO3)2·4H2O, 25 mM NH4H2PO4, and 0.5 mM AgNO3 at 65°C. Meanwhile, the calcium phosphate matrix was also deposited by pulse current, and Ag was afterwards grown by direct current from 0.1 M KNO3 + x mM AgNO3 (x = 5, 10) at 25 °C (2S approach). The Ca/P ratio of the matrix was compatible with the formation of calcium-deficient hydroxyapatite (CDHA). The resulting Ag content in the composites could be varied between 4 and 13 wt% as a function of the working conditions. The 2S-derived coatings produced by electroplating Ag at j = -20.8 mA/cm2 from 0.1 M KNO3 + 10 mM AgNO3 furnished an optimal dispersion of the AgNPs on top of the CDHA matrix, while aggregation and/or dendritic growth was observed in other cases. Glow discharge optical emission spectrometry (GDOES) measurements indicated that a given amount of AgNPs becomes engulfed in the CDHA matrix during the 1S electrodeposition, whereas most of them decorate its outer surface in the 2S-derived coatings. The applicability of the two approaches was extended to the case of zinc oxide. ZnO-containing CDHA coatings in which the Zn element was homogeneously distributed across the film surface were obtained from 42 mM Ca(NO3)2·4H2O, 25 mM NH4H2PO4 and 1 mM Zn(NO3)2·6H2O at 65 °C (1S approach). On the contrary, ZnO-NPs could be clearly observed when deposition from 5 mM KNO3 + 5 mM Zn(NO3)2 was performed at 70 °C on top of previously grown CDHA (2S approach). The results indicated that the percentage and location of the antibacterial element (Ag, Zn) in the calcium phosphate matrix can be tuned on demand to a great extent by electrochemical means.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Proliferation and Differentiation of Human Osteoblasts by Remotely Controlled Magnetic-Field-Induced Electric Stimulation Using Flexible Substrates

  • Careta, Oriol|||0000-0003-1333-0300
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Perdikos, Filippos|||0000-0002-3268-6356
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Pellicer, Eva|||0000-0002-8901-0998
  • Stefani, Christina|||0000-0002-8818-075X
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
With the progressive aging of the population, bone fractures are an increasing major health concern. Diverse strategies are being studied to reduce the recovery times using nonaggressive treatments. Electrical stimulation (either endogenous or externally applied electric pulses) has been found to be effective in accelerating bone cell proliferation and differentiation. However, the direct insertion of electrodes into tissues can cause undesirable inflammation or infection reactions. As an alternative, magnetoelectric heterostructures (wherein magnetic fields are applied to induce electric polarization) could be used to achieve electric stimulation without the need for implanted electrodes. Here, we develop a magnetoelectric platform based on flexible kapton/FeGa/P(VDF-TrFE) (flexible substrate/magnetostrictive layer/ferroelectric layer) heterostructures for remote magnetic-field-induced electric field stimulation of human osteoblast cells. We show that the use of flexible supports overcomes the clamping effects that typically occur when analogous magnetoelectric structures are grown onto rigid substrates (which preclude strain transfer from the magnetostrictive to the ferroelectric layers). The study of the diverse proliferation and differentiation markers evidence that in all the stages of bone formation (cell proliferation, extracellular matrix maturation, and mineralization), the electrical stimulation of the cells results in a remarkably better performance. The results pave the way for novel strategies for remote cell stimulation based on flexible platforms not only in bone regeneration but also in many other applications where electrical cell stimulation may be beneficial (e.g., neurological diseases or skin regeneration).