Pasar al contenido principal

ESTUDIO DE LOS MECANISMOS DE DEGRADACION DE MATERIALES MAGNETO-ELECTRICOS SIMULANDO CONDICIONES DE TRABAJO REALES Y ESCALADO DE MATERIALES SELECCIONADOS

PID2020-116844RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION CIDETEC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hydrogen Evolution Reaction of Electrodeposited Ni-W Films in Acidic Medium and Performance Optimization Using Machine Learning

  • de Paz Castany, Roger|||0000-0003-4211-2636
  • Eiler, Konrad|||0000-0001-8648-6395
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Lekka, Maria|||0000-0001-6811-3843
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Brunin, Guillaume|||0000-0002-5685-4668
  • Rignanese, Gian-Marco|||0000-0002-1422-1205
  • Waroquiers, David|||0000-0001-8943-9762
  • Collet, Thomas|||0000-0002-5503-6444
  • Hubin, Annick
  • Pellicer, Eva|||0000-0002-8901-0998
Ni-W alloy films were electrodeposited from a gluconate aqueous bath at pH=5.0, at varying current densities and temperatures. While there is little to no difference in composition, i. e., all films possess ~12 at.% W, their activity at hydrogen evolution reaction (HER) in acidic medium is greatly influenced by differences in surface morphology. The kinetics of HER in 0.5 M HSO indicates that the best performing film was obtained at a current density of -4.8 mA/cm and 50 °C. The Tafel slopes (b) and the overpotentials at a geometric current density of -10 mA/cm (η) obtained for 200 cycles of linear sweep voltammetry (LSV) from a set of films deposited using different parameters were fed into a machine learning algorithm to predict optimum deposition conditions to minimize b, η, and the degradation of samples over time. The optimum deposition conditions predicted by the machine learning model led to the electrodeposition of Ni-W films with superior performance, exhibiting b of 33-45 mV/dec and an η of 0.09-0.10 V after 200 LSVs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mesoporous Ni-Pt nanoparticles on Ni foam by electrodeposition, Dual porosity for efficient alkaline hydrogen evolution

  • Eiler, Konrad|||0000-0001-8648-6395
  • Alcaide, Francisco|||0000-0002-3373-3978
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In order to maximise electrochemically active surface area for water splitting, mesoporous Ni-Pt nanoparticles (NPs) are electrodeposited onto open-cell Ni foam to obtain a dual (macro- and meso-) porosity. Homogeneous deposition of the NPs is achieved by the use of a cylindrical Pt-coated mesh counter electrode, establishing a uniform electric field around the Ni foam substrate during electrodeposition. The Ni/Pt ratio is tunable with the electrodeposition parameters and all NPs are single-phase face-centred cubic solid solution and nanocrystalline, with a pore size of approx. 10 nm. Ni foam decorated with the Ni-rich particles, with mean particle sizes ranging from 50 to 80 nm, shows significantly higher activity at hydrogen evolution reaction (HER) in alkaline media with respect to the bare Ni foam. The highest HER efficiency was found fora relatively low Pt content of the NPs of about 26 at% (i. e., at 74 at% Ni) with an improvement of a factor 8 over bare Ni foam after durability assessment. These improvements are attributed to the higher surface area thanks to the NP structure, the dual porosity, and the alloying with Pt.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PS-b-P4VP block copolymer micelles as a soft template to grow openly porous nickel films for alkaline hydrogen evolution

  • Fagotto Clavijo, Roberto
  • Riba Moliner, Marta
  • González Campo, Arántzazu
  • Sort, Jordi
  • Pellicer, Eva
  • Eiler, Konrad
Highly porous Ni films have been potentiostatically synthesised by micelle-assisted electrodeposition using custom-made PS-b-P4VP block copolymer micelles as a soft template. Two PS-b-P4VP block copolymers with PS/P4VP block ratios of 1:1 and 1:4 were used for the micelle-assisted electrodeposition, resulting in Ni films with large pores of diameters varying from 25 to 600 nm (1:1), and from 10 to 230 nm (1:4). As a result of the interconnected porosity, and hence the drastic increase of the surface-to-volume ratio, the electrocatalytic performance at hydrogen evolution reaction (HER) in alkaline media is significantly improved in comparison to a dense Ni film, and—more importantly—even in comparison to a highly mesoporous Ni film with monodisperse 10 nm wide pores. Most remarkably, it is discovered that the openly porous Ni electrocatalysts not only lead to a simple increase in HER current density, but also to a lower overpotential and a better long-term performance. While the bulk of the films is metallic, Ni(OH)2 is formed on the surfaces of all Ni films during HER. This effect leads to an initial decrease of the catalytic activity, but provides excellent stability in alkaline media. The presented synthesis process for pure Ni may be readily adopted to any other electroplatable metals and alloys., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101058076 and the Marie Skłodowska-Curie grant agreement No 764977. Additional funding was obtained from the Generalitat de Catalunya under project 2017-SGR-292 and the Spanish Government under PID2019–108794 GB-I00, PID2020–116844RB-C21, and associated FEDER Project. KE acknowledges the Spanish Ministerio de Universidades for a Margarita Salas fellowship, financed by the European Union – NextGenerationEU. AGC acknowledges financial support from the Spanish Ministry of Science through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE, 2020–2023)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Proliferation and Differentiation of Human Osteoblasts by Remotely Controlled Magnetic-Field-Induced Electric Stimulation Using Flexible Substrates

  • Careta, Oriol
  • Nicolenco, Aliona
  • Perdikos, Filippos
  • Blanquer, Andreu
  • Ibáñez, Elena
  • Pellicer, Eva
  • Stefani, Christina
  • Sepúlveda, Borja
  • Nogués, Josep
  • Sort, Jordi
  • Nogués, Carme
With the progressive aging of the population, bone fractures are an increasing major health concern. Diverse strategies are being studied to reduce the recovery times using nonaggressive treatments. Electrical stimulation (either endogenous or externally applied electric pulses) has been found to be effective in accelerating bone cell proliferation and differentiation. However, the direct insertion of electrodes into tissues can cause undesirable inflammation or infection reactions. As an alternative, magnetoelectric heterostructures (wherein magnetic fields are applied to induce electric polarization) could be used to achieve electric stimulation without the need for implanted electrodes. Here, we develop a magnetoelectric platform based on flexible kapton/FeGa/P(VDF-TrFE) (flexible substrate/magnetostrictive layer/ferroelectric layer) heterostructures for remote magnetic-field-induced electric field stimulation of human osteoblast cells. We show that the use of flexible supports overcomes the clamping effects that typically occur when analogous magnetoelectric structures are grown onto rigid substrates (which preclude strain transfer from the magnetostrictive to the ferroelectric layers). The study of the diverse proliferation and differentiation markers evidence that in all the stages of bone formation (cell proliferation, extracellular matrix maturation, and mineralization), the electrical stimulation of the cells results in a remarkably better performance. The results pave the way for novel strategies for remote cell stimulation based on flexible platforms not only in bone regeneration but also in many other applications where electrical cell stimulation may be beneficial (e.g., neurological diseases or skin regeneration)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreements no. 861046 and no. 861145 (Bioremia and BeMAGIC European Training Networks), grants PID2020-116844RB-C21, PID2020 116844RB-C22, and PID2019-106229RB-I00 funded by MCIN/AEI/10.13039/501100011033 and the Generalitat de Catalunya (2021-SGR-00651, 2021-SGR-00122). We also acknowledge the European Research Council (2021-ERC-Advanced REMINDS grant no. 101054687). A.N. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 892661-MAGNUS. A.B. has received funding from a postdoctoral fellowship within the Beatriu de Pinós programme, funded by the Secretary of Universities and Research (Government of Catalonia) and by the Horizon 2020 programme of research and innovation of the European Union under Marie Sklodowska-Curie grant agreement no. 801370. ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. The authors would like to thank the staff from the Servei de Microscòpia of Universitat Autònoma de Barcelona. The authors also want to thank Iris Nogués for preparing Scheme 1 and Nicolau López-Pintó for his help in growing some of the samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composition-Dependent Voltage-Driven OFF-ON Switching of Ferromagnetism in Co-Ni Oxide Microdisks

  • Arredondo-López, Aitor
  • Eiler, Konrad
  • Quintana, Alberto
  • Rius, Gemma
  • Spasojevic, Irena
  • Salicio, Asier
  • Nicolenco, Aliona
  • Lekka, Maria
  • García-Lecina, Eva
  • Brunin, Guillaume
  • Waroquiers, David
  • Rignanese, Gian-Marco
  • Pellicer, Eva
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionics, which refers to the modification of the magnetic properties of materials through electric-field-induced ion migration, is emerging as one of the most promising methods to develop nonvolatile energy-efficient memory and spintronic and magnetoelectric devices. Herein, the controlled generation of ferromagnetism from paramagnetic Co-Ni oxide patterned microdisks (prepared upon thermal oxidation of metallic microdisks with dissimilar Co-Ni ratios, i.e., Ni25Co75 and Ni50Co50) is demonstrated under the action of voltage. The effect is related to the partial reduction of the oxide phases to their metallic forms. Samples richer in Co show stronger magneto-ionic activity, which manifests in lower-onset threshold voltages, faster switching rates, and larger values of the attained saturation magnetization. By means of scanning electron microscopy, a cobalt segregation phenomenon has been experimentally observed upon thermal oxidation, which has been theoretically discussed from the diffusivities' viewpoint. X-ray diffraction characterization has revealed transitions between purely mixed Ni and Co oxides, in the OFF state, to a mixture of oxide and metallic phases, in the ON state, because of the oxygen ion motion outward/inward the Co-Ni oxide microdisks, depending on the voltage polarity. Ab initio calculations reveal that the energy barrier for oxygen vacancy migration is lower in CoO than in NiO, in agreement with the obtained magneto-ionic responses. The observation of magneto-ionic effects in patterned disks (and not only in archetypical continuous films) is a step further for the practical utilization of this phenomenon in real miniaturized devices., The authors also acknowledge financial support from PID2020-116844RB-C21, PID2020 116844RB-C22, 2021-SGR-00651, MCIN/AEI/10.13039/501100011033 and European Union NextGeneration/PRTR (grant CNS2022-135230), PDC2021-121276-C31, PDC2021-121276-C32 and the European Research Council (2021-ERC-Advanced “REMINDS” N° 101054687) grants. E.M. is a Serra Húnter Fellow. G.R. acknowledges Ayudas Ramon y Cajal ref. RyC-2026-21412 and access to the Spanish ICTS Network MICRONANOFABS. The IMB-CNM-CSIC is supported by the María de Maetzu Centres of Excellence programme ref. CEX2023-001397-M funded by MCINN-AEI. We also acknowledge the equipment and service provided by the Surface Analysis Unit of the CCiTUB in the work for the XPS analysis carried out. The HRTEM characterization was performed at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Motion analysis and real-time trajectory prediction of magnetically steerable catalytic Janus micromotors

  • Wu, Jiaen|||0000-0001-5020-873X
  • Folio, David|||0000-0001-9430-6091
  • Zhu, Jiawei
  • Jang, Bumjin
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Feng, Junxiao
  • Gambardella, Pietro|||0000-0003-0031-9217
  • Sort, Jordi|||0000-0003-1213-3639
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Ergeneman, Olgaç
  • Ferreira, Antoine
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Chemically driven micromotors display unpredictable trajectories due to the rotational Brownian motion interacting with the surrounding fluid molecules. This hampers the practical applications of these tiny robots, particularly where precise control is a requisite. To overcome the rotational Brownian motion and increase motion directionality, robots are often decorated with a magnetic composition and guided by an external magnetic field. However, despite the straightforward method, explicit analysis and modeling of their motion have been limited. Here, catalytic Janus micromotors are fabricated with distinct magnetizations and a controlled self-propelled motion with magnetic steering is shown. To analyze their dynamic behavior, a dynamic model that can successfully predict the trajectory of micromotors in uniform viscous flows in real time by incorporating a form of state-dependent-coefficient with a robust two-stage Kalman filter is theoretically developed. A good agreement is observed between the theoretically predicted dynamics and experimental observations over a wide range of model parameter variations. The developed model can be universally adopted to various designs of catalytic micro-/nanomotors with different sizes, geometries, and materials, even in diverse fuel solutions. Finally, the proposed model can be used as a platform for biosensing, detecting fuel concentration, or determining small-scale motors' propulsion mechanisms in an unknown environment.