Pasar al contenido principal

MEMBRANAS DE MATRIZ MIXTA PARA SEPARACION EFICIENTE DE MEZCLAS OLEFINA/PARAFINA Y PARA CAPTURA DE CO2

PID2019-109403RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas separation by mixed matrix membranes with porous organic polymer inclusions within o-hydroxypolyamides containing m-terphenyl moieties

  • Soto, Cenit
  • Torres-Cuevas, Edwin S.
  • González-Ortega, Alfonso
  • Palacio, Laura
  • Lozano López, Ángel Emilio
  • Freeman, Benny D.
  • Prádanos, Pedro
  • Hernández, Antonio
A hydroxypolyamide (HPA) manufactured from 2,2-bis(3-amino-4-hydroxy phenyl)-hexafluoropropane (APAF) diamine and 5-terbutyl-m-terphenyl-4,4-dicarboxylic acid chloride (tBT-pCl), and a copolyimide produced by stochiometric copolymerization of APAF and 4,4-(hexafluoroiso-propylidene) diamine (6FpDA), using the same diacid chloride, were obtained and used as polymeric matrixes in mixed matrix membranes (MMMs) loaded with 20% (w/w) of two porous polymer networks (triptycene-isatin, PPN-1, and triptycene-trifluoroacetophenone, PPN-2). These MMMs, and also the thermally rearranged membranes (TR-MMMs) that underwent a thermal treatment process to convert the o-hydroxypolyamide moieties to polybenzoxazole ones, were characterized, and their gas separation properties evaluated for H, N, O, CH, and CO. Both TR process and the addition of PPN increased permeability with minor decreases in selectivity for all gases tested. Excellent results were obtained, in terms of the permeability versus selectivity compromise, for H/CH and H/N separations with membranes approaching the 2008 Robeson’s trade-off line. The best gas separation properties were obtained when PPN-2 was used. Finally, gas permeation was characterized in terms of chain intersegmental distance and fraction of free volume of the membrane along with the kinetic diameters of the permeated gases. The intersegmental distance increased after TR and/or the addition of PPN-2. Permeability followed an exponential dependence with free volume and a quadratic function of the kinetic diameter of the gas., This work was supported by the Spanish Government (AEI) through projects PID2019- 109403RB-C21 and PID2019-109403RB-C22 and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19, and PhD grant of Cenit Soto). Cenit Soto thanks the University of Valladolid for mobility grant UVa-2019
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogen Recovery by Mixed Matrix Membranes Made from 6FCl-APAF HPA with Different Contents of a Porous Polymer Network and Their Thermal Rearrangement

  • Soto, Cenit
  • Torres-Cuevas, Edwin S.
  • González-Ortega, Alfonso
  • Palacio, Laura
  • Prádanos, Pedro
  • Freeman, Benny D.
  • Lozano López, Ángel Emilio
  • Hernández, Antonio
Mixed matrix membranes (MMMs) consisting of a blend of a hydroxypolyamide (HPA) matrix and variable loads of a porous polymer network (PPN) were thermally treated to induce the transformation of HPA to polybenzoxazole (β-TR-PBO). Here, the HPA matrix was a hydroxypolyamide having two hexafluoropropyilidene moieties, 6FCl-APAF, while the PPN was prepared by reacting triptycene (TRP) and trifluoroacetophenone (TFAP) in a superacid solution. The most probable size of the PPN particles was 75 nm with quite large distributions. The resulting membranes were analyzed by SEM and AFM. Up to 30% PPN loads, both SEM and AFM images confirmed quite planar surfaces, at low scale, with limited roughness. Membranes with high hydrogen permeability and good selectivity for the gas pairs H2/CH4 and H2/N2 were obtained. For H2/CO2, selectivity almost vanished after thermal rearrangement. In all cases, their hydrogen permeability increased with increasing loads of PPN until around 30% PPN with ulterior fairly abrupt decreasing of permeability for all gases studied. Thermal rearrangement of the MMMs resulted in higher permeabilities but lower selectivities. For all the membranes and gas pairs studied, the balance of permeability vs. selectivity surpassed the 1991 Robeson’s upper bound, and approached or even exceeded the 2008 line, for MMMs having 30% PPN loads. In all cases, the HPA-MMMs before thermal rearrangement provided good selectivity versus permeability compromise, similar to their thermally rearranged counterparts but in the zone of high selectivity. For H2/CH4, H2/N2, these nonthermally rearranged MMMs approach the 2008 Robeson’s upper bound while H2/CO2 gives selective transport favoring H2 on the 1991 Robeson’s bound. Thus, attending to the energy cost of thermal rearrangement, it could be avoided in some cases especially when high selectivity is the target rather than high permeability., This work was supported by the Spanish Government (AEI) through projects PID2019-109403RBC21/AEI/10.13039/501100011033, PID2019-109403RBC22/AEI/10.13039/501100011033 and EQC2019-006481-P, and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19 and PhD grant of C.S.). C.S. thanks University of Valladolid for a mobility grant UVa-2019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Permeable Mixed Matrix Membranes of Thermally Rearranged Polymers and Porous Polymer Networks for Gas Separations

  • Aguilar-Lugo, Carla
  • Lee, W. H.
  • Miguel, Jesús A.
  • Campa, José G. de la
  • Prádanos, Pedro
  • Bae, J. Y.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
Mixed matrix membranes (MMMs) have been obtained by blending an aromatic ortho-hydroxypolyimide (PIOH) or an ortho-acetylpolyimide (PIOAc) with different loading amounts (15 and 30 wt %) of a microporous polymer network (PPN), which was obtained from the reaction of triptycene and isatin. The excellent thermal resistance of the PPN (above 500 °C) allowed it to be used as a filler to successfully prepare thermally rearranged polybenzoxazole (TR-PBO)-MMMs obtained from the thermal treatment of the above MMMs. Moreover, PPN showed relatively good compatibility with the polyimide matrix, which improved the TR-PBO formation. The gas separation performances of these MMMs before and after the thermal process were studied for five representative gases (He, O2, N2, CO2, and CH4). For the MMMs derived from ortho-functional polyimides, the gas permeability considerably increased for all of the gases, whereas the selectivity for gas pairs, such as CO2/N2 and CO2/CH4, remained similar. Thus, the selectivity-permeability performance of PIOH- and PIOAc-MMMs containing 30 wt % of PPN (PIOH30 and PIOAc30) surpassed the 1991 Robeson limit for the CO2/CH4 gas pair. In the case of TR-PBO-MMMs (TROH and TROAc-MMMs), the thermal rearrangement process led to an increase in the gas permeability, showing values much better than those observed for the TR-PBO material employed as a MMM matrix. The selectivity values were a little bit lower than the pristine TR-PBO membranes. The CO2 permeability of TROAc30 was 1036 barrer with a CO2/CH4 selectivity of 28, surpassing the 2008 Robeson limit., This work was supported by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB-C22 (AEI/FEDER, UE), CTQ2017-89217-P (AEI/FEDER, UE), and PID2019-109403RB-C21 (AEI/FEDER, UE)) and by theSpanish Junta de Castilla y León (VA224P20). This research was partially supported by the Technology Development Program to Solve Climate Change through the National Research Foundation of Korea (NRF), funded by the Ministry of Science and ICT (NRF-2018M1A2A2061979) and by a Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Ministry of Trade, Industry & Energy (MOTIE) (20202020800330) of South Korea.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas separation membranes obtained by partial pyrolysis of polyimides exhibiting polyethylene oxide moieties

  • Matesanz-Niño, Laura
  • Aguilar-Lugo, Carla
  • Prádanos, Pedro
  • Hernández, Antonio
  • Bartolomé, Camino
  • González de la Campa, José
  • Palacio, Laura
  • González-Ortega, Alfonso
  • Galizia, Michele
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
Aromatic copolyimides (PIx) and aromatic-aliphatic copolyimides (PIxEOy) were synthesized by reacting 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) with mixtures obtained from 2,2′-bis(4-aminophenyl)hexafluoropropane (6FpDA), 5-diaminobenzoic acid (DABA) and Jeffamine ED-2003 (PEO). The selective thermal removal of PEO from PIxEOy yielded membranes with high thermal stability and good mechanical properties. The presence of carboxylic groups minimized the shrinkage during the cross-linking process. The membranes containing 10 mol% DABA exhibited good O2/N2 and CO2/CH4 separation performance, and resistance to CO2 plasticization. PIx/PIxEOy blends containing less than 10 wt% PEO were prepared. The CO2/CH4 selectivity/permeability balance of cross-linked membranes largely exceeded that of PIx. The results highlight a possible strategy for using analogous cross-linkable polymers exhibiting ethylene oxide moieties as mere additive to prepare high free volume polyimide's membranes, exhibiting enhanced separation properties and high resistance to plasticization., This work was supported by the Spanish Government (AEI) through projects PID2019-109403RB-C21, PID2019-109403RB-C22 and PID2020-118547 GB-I00, and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19 and VA224P20). M.G. acknowledges support of this work from the University of Oklahoma (VPR Office, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas Permeability, Fractional Free Volume and Molecular Kinetic Diameters: The Effect of Thermal Rearrangement on ortho-hydroxy Polyamide Membranes Loaded with a Porous Polymer Network

  • Soto, Cenit
  • Torres-Cuevas, Edwin S.
  • Palacio, Laura
  • Prádanos, Pedro
  • Freeman, Benny D.
  • Lozano López, Ángel Emilio
  • Hernández, Antonio
  • Comesaña-Gándara, B.
Mixed-matrix membranes (MMMs) consisting of an ortho-hydroxy polyamide (HPA) matrix, and variable loads of a porous polymer network (PPN) were thermally treated to induce the transformation of HPA to polybenzoxazole (β-TR-PBO). Two different HPAs were synthesized to be used as a matrix, 6FCl-APAF and tBTpCl-APAF, while the PPN used as a filler was prepared by reacting triptycene and trifluoroacetophenone. The permeability of He, H, N, O, CH and CO gases through these MMMs are analyzed as a function of the fraction of free volume (FFV) of the membrane and the kinetic diameter of the gas, allowing for the evaluation of the free volume. Thermal rearrangement entails an increase in the FFV. Both before and after thermal rearrangement, the free volume increases with the PPN content very similarly for both polymeric matrices. It is shown that there is a portion of free volume that is inaccessible to permeation (occluded volume), probably due to it being trapped within the filler. In fact, permeability and selectivity change below what could be expected according to densities, when the fraction of occluded volume increases. A higher filler load increases the percentage of inaccessible or trapped free volume, probably due to the increasing agglomeration of the filler. On the other hand, the phenomenon is slightly affected by thermal rearrangement. The fraction of trapped free volume seems to be lower for membranes in which the tBTpCl-APAF is used as a matrix than for those with a 6FCl-APAF matrix, possibly because tBTpCl-APAF could approach the PPN better. The application of an effective medium theory for permeability allowed us to extrapolate for a 100% filler, giving the same value for both thermally rearranged and non-rearranged MMMs. The pure filler could also be extrapolated by assuming the same tendency as in the Robeson’s plots for MMMs with low filler content., This work was supported by the Spanish Government (AEI) through projects PID2019- 109403RBC21/AEI/10.13039/501100011033, PID2019-109403RBC22/AEI/10.13039/501100011033 and EQC2019-006481-P; by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19 and PhD grant of C.S.); and by the University of Valladolid (PROYEMER-2021-05). C.S. thanks the University of Valladolid for the mobility grant UVa-2019, and B.C-G. thanks A.E.I. for the Juan de la Cierva-Incorporation Grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Matrix Membranes Loaded with a Porous Organic Polymer Having Bipyridine Moieties

  • Rico-Martínez, S.
  • Álvarez, Cristina
  • Hernández, Antonio
  • Miguel, Jesús A.
  • Lozano López, Ángel Emilio
Mixed matrix membranes (MMMs), derived from three aromatic polyimides (PIs), and an affordable porous organic polymer (POP) having basic bipyridine moieties were prepared. Matrimid and two fluorinated polyimides, which were derived from 4,4′-(hexafluoroisopropylidene)diphthalic anhydride and 2,2′-bis(4-aminophenyl)hexafluoropropane (6F6F) or 2,4,6-trimethyl-m-phenylenediamine (6FTMPD), were employed as polymer matrixes. The used POP was a highly microporous material (surface area of 805 m g) with excellent thermal and chemical stability. The MMMs showed good compatibility between the PIs and POP, high thermal stabilities and glass transition temperatures superior to those of the neat PI membranes, and good mechanical properties. The addition of POP to the matrix led to an increase in the gas diffusivity and, thus, in permeability, which was associated with an increase in the fractional free volume of MMMs. The increase in permeability was higher for the less permeable matrix. For example, at 30 wt.% of POP, the permeability to CO and CH of the MMMs increased by 4-and 7-fold for Matrimid and 3-and 4-fold for 6FTMPD. The highest CH permeability led to a decrease in CO/CH selectivity. The CO/N separation performance was interesting, as the selectivity remained practically constant. Finally, the POP showed no molecular sieving effect towards the CH/CH and CH/CH gas pairs, but the permeability increased by about 4-fold and the selectivity was close to that of the matrix. In addition, because the POP can form metal ion bipyridine complexes, modified POP-based MMMs could be employed for olefin/paraffin separations., This work was supported by the Spanish Government (AEI) through projects PID2019- 109403RB-C21, PID2019-109403RB-C22, and PID2020-118547GB-I00, and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19 and VA224P2
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyrrolidine-based catalytic microporous polymers in sustainable C[dbnd]N and C[dbnd]C bond formation via iminium and enamine activation

  • Vargas, E. L.
  • Esteban, Noelia
  • Cencerrero, J.
  • Francés, V.
  • Álvarez, Cristina
  • Miguel, Jesús A.
  • Gallardo Ruiz, Alberto
  • Lozano López, Ángel Emilio
  • Cid, M. B.
A new set of catalytic materials having a pyrrolidine moiety confined in microporous organic polymer networks (POPs) has been attained. These catalytic polymers have been prepared by a straightforward synthesis starting from microporous polymer networks made from isatin (or a mixture of isatin and trifluoroacetophenone) and 1,3,5-triphenylbenzene. The polymers efficiently catalyzed the formation of nitrones under very mild and sustainable conditions using green solvents through an iminium ion activation mechanism. The reactions are scalable, and polymers are easily recycled. Special attention has been paid to understanding all the factors that could affect the efficiency of the confined catalysts. The electronic and conformational characteristics of the pyrrolidine moiety attached to the porous polymers, as well as other features that could affect the transport through the network, such as molecular volume and shape of reactants and products, and even hydrophilic or hydrophobic properties, have been systematically evaluated. In addition, the heterogeneous polymers are also useful in C[dbnd]C bond formation through both iminium ion and enamine activation., We acknowledge the Spanish Government (Agencia Estatal de Investigación projects; CTQ2016-78779-R, PID2019-109403RB-C22, RTI2018-096328-B-I00, CTQ2017-89217-P and PID2020-118547GB- I00), and the Regional Government of Castilla y León (project CyL and EU-FEDER program VA224P20), for financial support. E. L. Vargas thanks University of Costa Rica for a PhD scholarship. We must thank Rebecca Chevillard and Valentina Petrelli for some preliminary experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Free Volume and Permeability of Mixed Matrix Membranes Made from a Terbutil-M-terphenyl Polyamide and a Porous Polymer Network

  • Soto, Cenit
  • Carmona, J.
  • Freeman, Benny D.
  • Palacio, Laura
  • González-Ortega, Alfonso
  • Prádanos, Pedro
  • Lozano López, Ángel Emilio
  • Hernández, Antonio
A set of thermally rearranged mixed matrix membranes (TR-MMMs) was manufactured and tested for gas separation. These membranes were obtained through the thermal treatment of a precursor MMM with a microporous polymer network and an o-hydroxypolyamide,(HPA) created through a reaction of 2,2-bis(3-amino-4-hydroxyphenyl)-hexafluoropropane (APAF) and 5′-terbutil-m-terfenilo-3,3″-dicarboxylic acid dichloride (tBTmCl). This HPA was blended with different percentages of a porous polymer network (PPN) filler, which produced gas separation MMMs with enhanced gas permeability but with decreased selectivity. The thermal treatment of these MMMs gave membranes with excellent gas separation properties that did not show the selectivity decreasing trend. It was observed that the use of the PPN load brought about a small decrease in the initial mass losses, which were lower for increasing PPN loads. Regarding the glass transition temperature, it was observed that the use of the filler translated to a slightly lower Tg value. When these MMMs and TR-MMMs were compared with the analogous materials created from the isomeric 5′-terbutil-m-terfenilo-4,4″-dicarboxylic acid dichloride (tBTpCl), the permeability was lower for that of tBTmCl, compared with the one from tBTpCl, although selectivity was quite similar. This fact could be attributed to a lower rigidity as roughly confirmed by the segmental length of the polymer chain as studied by WAXS. A model for FFV calculation was proposed and its predictions compared with those evaluated from density measurements assuming a matrix-filler interaction or ideal independence. It turns out that permeability as a function of FFV for TR-MMMs follows an interaction trend, while those not thermally treated follow the non-interaction trend until relatively high PPN loads were reached., This work was supported by the Spanish Government (AEI) through projects PID2019- 109403RB-C21/AEI/10.13039/501100011033 and PID2019-109403RB-C22/AEI/10.13039/501100011033; and by the Regional Government of Castilla y León and the EU-FEDER programme (CLU2017-09, UIC082). C.S acknowledges the Spanish Government (AEI) for the Ph. D. grant. The University of Valladolid is also acknowledged for the mobility grant UVa 2019 given to C. Soto.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermally Rearranged Mixed Matrix Membranes from Copoly(o-hydroxyamide)s and Copoly(o-hydroxyamideamide) s with a Porous Polymer Network as a Filler¿A Comparison of their Gas Separation Performances

  • Soto, Cenit
  • Comesaña-Gándara, Bibiana
  • Marcos-Fernández, Ángel
  • Cuadrado, Purificación
  • Palacio, Laura
  • Lozano López, Ángel Emilio
  • Álvarez, Cristina
  • Prádanos, Pedro
  • Hernández, Antonio
Copoly(o-hydroxyamide)s (HPA) and copoly(o-hydroxyamide-amide)s (PAA) have been synthesized to be used as continuous phases in mixed matrix membranes (MMMs). These polymeric matrices were blended with different loads (15 and 30 wt.%) of a relatively highly microporous porous polymer network (PPN). SEM images of the manufactured MMMs exhibited good compatibility between the two phases for all the membranes studied, and their mechanical properties have been shown to be good enough even after thermal treatment. TheWAX results show that the addition of PPN as a filler up to 30% does not substantially change the intersegmental distance and the polymer packing. It seems that, for all the membranes studied, the free volume that determines gas transport is in the high end of the possible range. This means that gas flow occurs mainly between the microvoids in the polymer matrix around the filler. In general, both HPA- and PAA-based MMMs exhibited a notable improvement in gas permeability, due to the presence of PPN, for all gases tested, with an almost constant selectivity. In summary, although the thermal stability of the PAA is limited by the thermal stability of the polyamide side chain, their mechanical properties were better. The permeability was higher for the PAA membranes before their thermal rearrangement, and these values increased after the addition of moderate amounts of PPN., This work was supported by the Spanish Government (AEI) through projects PID2019- 109403RB-C21/AEI/10.13039/501100011033 and PID2019-109403RB-C22/AEI/ 10.13039/501100011033 and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, CL-EI-2021-07, UIC082). C.S. acknowledges the Regional Government of Castilla y Leon for her Ph.D contract
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aromatic Polyimide Membranes with tert-Butyl and Carboxylic Side Groups for Gas Separation Applications—Covalent Crosslinking Study

  • Esteban, Noelia
  • Juan-y-Seva, Marta
  • Aguilar-Lugo, Carla
  • Miguel, Jesús A.
  • Staudt, Claudia
  • Campa, José G. de la
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
A set of aromatic copolyimides was obtained by reaction of 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), and mixtures of the diamines 1,4-bis(4-amino-2-trifluoromethylphenoxy)-2,5-di-tert-butylbenzene (CFTBAPB) and 3,5-diamino benzoic acid (DABA). These polymers were characterized and compared with the homopolymer derived from 6FDA and CFTBAPB. All copolyimides showed high molecular weight values and good mechanical properties. The presence of carboxylic groups in these copolymers allowed their chemical crosslinking by reaction with 1,4-butanediol. Glass transition temperatures (Tg) were higher than 260 °C, showing the non-crosslinked copolyimides had the highest Tg values. Degradation temperature of crosslinked copolyimides was lower than their corresponding non-crosslinked ones. Mechanical properties of all polymers were good, and thus, copolyimide (precursor, and crosslinked ones) films could be tested as gas separation membranes. It was observed that CO permeability values were around 100 barrer. Finally, the plasticization resistance of the crosslinked material having a large number of carboxylic groups was excellent., This research was funded by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE) and PID2020-118547GB-I00 (AEI/FEDER, UE)) and by the Spanish Junta de Castilla y León (VA224P20), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Insights in the Synthesis of High-Molecular-Weight Aromatic Polyamides-Improved Synthesis of Rod-like PPTA

  • Hernández, Guiomar
  • Ferrero, Sergio
  • Reinecke, Helmut
  • Bartolomé, Camino
  • Martínez-Ilarduya, Jesús M.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
By employing a variation of the polyamidation method using in situ silylated diamines and acid chlorides, it was possible to obtain a rod-type polyamide: poly(p-phenylene terephthalamide) (PPTA, a polymer used in the high-value-added material Kevlar), with a molecular weight much higher than that obtained with the classical and industrial polyamidation method. The optimization of the method has consisted of using, together with the silylating agent, a mixture of pyridine and a high-pKa tertiary amine. The research was complemented by a combination of nuclear magnetic resonance and molecular simulation studies, which determined that the improvements in molecular weight derive mainly from the formation of silylamide groups in the growing polymer., This research was funded by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), and PID2020-118547GB-I00 (AEI/FEDER, UE)) and by the Spanish Junta de Castilla y León (VA224P20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Isomeric Aromatic Polyimides Containing Biphenyl Moieties for Gas Separation Applications

  • Matesanz-Niño, Laura
  • Cuellas, David
  • Aguilar-Lugo, Carla
  • Palacio, Laura
  • González-Ortega, Alfonso
  • Campa, José G. de la
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
An optimized synthesis of the monomer 2,2′3,3′-biphenyltetracarboxylic dianhydride, iBPDA, was performed to obtain high molecular weight polymers. This monomer has a contorted structure that produces a non-linear shape, hindering the packing of the polymer chain. Aromatic polyimides of high molecular weight were obtained by reaction with the commercial diamine 2,2-bis(4-aminophenyl) hexafluoropropane, 6FpDA, which is a very common monomer in gas separation applications. This diamine has hexafluoroisopropylidine groups which introduce rigidity in the chains, hindering efficient packing. The thermal treatment of the polymers processed as dense membranes had two targets: on the one hand, to achieve the complete elimination of the solvent used, which could remain occluded in the polymeric matrix, and on the other hand to ensure the complete cycloimidization of the polymer. A thermal treatment exceeding the glass transition temperature was performed to ensure the maximum degree of imidization at 350 °C. The good mechanical properties of these materials allow for their use in high-pressure gas purification applications. Moreover, models of the polymers exhibited an Arrhenius-like behavior characteristic of secondary relaxations, normally associated with local motions of the molecular chain. The gas productivity of these membranes was high., This research was funded by the Spanish Government (AEI) through projects PID2019-109403RB-C21 and PID2019-109403RB-C22, and by Spain’s Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082 and VA088G19), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium Catalysts Supported in Microporous Phosphine Polymer Networks

  • Esteban, Noelia
  • Claros, Miguel
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Bartolomé, Camino
  • Martínez-Ilarduya, Jesús M.
  • Miguel, Jesús A.
A new set of microporous organic polymers (POPs) containing diphosphine derivatives synthesized by knitting via Friedel–Crafts has been attained. These amorphous three-dimensional materials have been prepared by utilizing diphosphines, 1,3,5-triphenylbenzene, and biphenyl as nucleophile aromatic groups, dimethoxymethane as the electrophilic linker, and FeCl3 as a promoting catalyst. These polymer networks display moderate thermal stability and high microporosity, boasting BET surface areas above 760 m2/g. They are capable of coordinating with palladium acetate, using the phosphine derivative as an anchoring center, and have proven to be highly efficient catalysts in Suzuki–Miyaura coupling reactions involving bromo- and chloroarenes under environmentally friendly (using water and ethanol as solvents) and aerobic conditions. These supported catalysts have achieved excellent turnover numbers (TON) and turnover frequencies (TOF), while maintaining good recyclability without significant loss of activity or Pd leaching after five consecutive reaction cycles., This research was funded by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), and PID2020-118547GB-I00 (AEI/FEDER, UE)) and by the Spanish Junta de Castilla y León (VA224P20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas adsorption isotherm, pore size distribution, and free volume fraction of polymer-polymer mixed matrix membranes before and after thermal rearrangement

  • Soto, C.
  • Cicuttin, N.
  • Viuda, M. de la
  • Tena, A.
  • Lozano López, Ángel Emilio
  • Hernández, A.
  • Palacio, L.
  • Prádanos, Pedro
In this work, CO adsorption at 273.15 K and N adsorption at 77 K of mixed matrix membranes has been studied, as a method to directly determine their fractional free volume (FFV). These membranes consist of a continuous phase of copoly(o-hydroxyamide)s (HPA) or copoly(o-hydroxyamide-amide)s (PAA) and a relatively highly porous polymer network filler (PPN1). Both the pure copolymers and the mixed matrix membranes (MMMs) have been analyzed before and after a thermal rearrangement (TR) process. The CO adsorption results have allowed characterizing the pore size distribution of the studied membranes in the 3–15 Å range, by using the Non-Local Density Functional Theory (NLDFT). Whereas the N adsorption has allowed determining the pore size distributions in the range between 20 and 250 Å. The experimental determination of the pore volume and the density allows the direct calculation of the membranes’ free volume fractions, which were in good agreement with the most usual FFV evaluation methods. In addition, part of the pore volume detected by N adsorption was associated with defects and poor integration of the membrane components. This correction has allowed us to make a new evaluation of the density of these materials., This work was supported by the Spanish Government (AEI) through projects PID2019-109403RB-C21/AEI/10.13039/501100011033 and PID2019-109403RB-C22/AEI/10.13039/501100011033; and by the Regional Government of Castilla y León and the EU-FEDER programme (CL-EI-2021-07, UIC082). C.S acknowledges the Regional Government of Castilla y Leon for her Ph. D. contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Matrix Membranes Using Porous Organic Polymers (POPs)—Influence of Textural Properties on CO2/CH4 Separation

  • Matesanz-Niño, L.
  • Moranchel-Pérez, J.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Casado-Coterillo, C.
Mixed matrix membranes (MMMs) provide the opportunity to test new porous materials in challenging applications. A series of low-cost porous organic polymer (POPs) networks, possessing tunable porosity and high CO uptake, has been obtained by aromatic electrophilic substitution reactions of biphenyl, 9,10-dihydro-9,10-dimethyl-9,10-ethanoanthracene (DMDHA), triptycene and 1,3,5-triphenylbenzene (135TPB) with dimethoxymethane (DMM). These materials have been characterized by FTIR, C NMR, WAXD, TGA, SEM, and CO uptake. Finally, different loadings of these POPs have been introduced into Matrimid, Pebax, and chitosan:polyvinyl alcohol blends as polymeric matrices to prepare MMMs. The CO/CH separation performance of these MMMs has been evaluated by single and mixed gas permeation experiments at 4 bar and room temperature. The effect of the porosity of the porous fillers on the membrane separation behavior and the compatibility between them and the different polymer matrices on membrane design and fabrication has been studied by Maxwell model equations as a function of the gas permeability of the pure polymers, porosity, and loading of the fillers in the MMMs. Although the gas transport properties showed an increasing deviation from ideal Maxwell equation prediction with increasing porosity of the POP fillers and increasing hydrophilicity of the polymer matrices, the behavior of biopolymer-based CS:PVA MMMs approached that of Pebax-based MMMs, giving scope to not only new filler materials but also sustainable polymer choices to find a place in membrane technology., This research was funded by IVACE program, Generalitat Valenciana, at the University of Cantabria, grant number PRO-81. THE APC was funded by the University of Cantabria. Also, this research was funded by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB- C22 (AEI/FEDER, UE), and PID2019-109403RB-C21 (AEI/FEDER, UE))
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalizadores heterogéneos, reciclables y de elevada eficiencia, confinados en redes de polímeros porosos

  • Pérez-Vidal, L.
  • Sánchez-MolPeceres, R.
  • Lozano López, Ángel Emilio
  • Martin, L.
  • Álvarez, C.
Ejemplar dedicado a: Polímeros en energía, [EN] This work provides an overview about the use of porous organic polymers (POPs) networks as efficient and easily recyclable heterogeneous catalysts in a wide diversity of chemical transformations, especially in organocatalysis, both in batch operations and in long-duration continuous flow processes. These heterogeneous catalysts can be easily obtained by incorporating the organic or metallic catalyst in the structures of POPs through different strategies. Furthermore, the possibility of using these heterogeneous catalysts in continuous operations is a key approach for these materials to be considered sustainable and they can be used on an industrial scale. In the field of asymmetric catalysis, the preparation of new chiral catalysts that allow enantiomers to be selectively discriminated to obtain numerous products with high added value or biologically activity is highly sought after, and even more so if they can be used in flow chemistry processes., [ES] Este artículo presenta una visión del uso de las redes de polímeros orgánicos porosos (POPs) como catalizadores heterogéneos eficientes y fácilmente reciclables en una amplia diversidad de transformaciones químicas, especialmente en organocatálisis, tanto en operaciones por lotes (batches) como en operaciones en continuo de larga duración. Estos catalizadores heterogéneos pueden obtenerse fácilmente por incorporación del catalizador orgánico o metálico en las estructuras de los POPs a través de diversas estrategias. Además, la posibilidad de usarlos en operaciones en continuo es clave para que estos materiales sean considerados sostenibles y puedan ser utilizados a escala industrial. En el ámbito de la catálisis asimétrica, la preparación de nuevos catalizadores quirales que permitan discriminar enantiómeros selectivamente para obtener numerosos productos de alto valor añadido o biológicamente activos es de gran interés, y más si tecnológicamente pueden emplearse en la química de flujo., Los autores agradecen la financiación recibida en el proyecto PID2019-109403RB-C22 concedido por la Agencia Estatal de Investigación (AEI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

6FDA-polyimide thin-film composite hollow fiber membranes for hydrofluorocarbons and CO2 separations

  • Gutiérrez-Hernández, S. V.
  • Rico-Martínez, S.
  • Pardo, F.
  • Álvarez, Cristina
  • Miguel, J. A.
  • Zarca, G.
  • Urtiaga, A.
Herein, high molecular weight fluorinated aromatic polyimides were assessed for the first time to recover difluoromethane (R-32) from its blends with other hydrofluorocarbons and hydrofluoroolefins (R-134a: 1,1,1,2-tetrafluoroethane, R-125: pentafluoroethane, and R-1234yf: 2,3,3,3-tetrafluoropropene). First, a screening was performed with thick flat membranes made of the 4,4’-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and three different amines: 2,2′-bis(4-aminophenyl)hexafluoropropane (6FpDA), 2,4,6-trimethyl-m-phenylenediamine (TMPD), and 2,3,5,6-tetramethyl-1,3-phenyldiamine (durene). As a result, 6FDA-TMPD was selected for the fabrication of defect-free hollow fiber-thin film composite membranes (HF-TFCM) due to its superior performance for the separation of R-32. These HF-TFCMs showed excellent separation performance to reclaim high-purity R-32 (permeate concentration >99 vol%) from the commercial binary blends R-410A and R-454B (a mixture of R-32 and R-1234yf). In addition, we report for the first time the membrane recovery of R-32 from the ternary blend R-407C (R-32/R-134a/R-125 38.2:43.8:18 vol%). Eventually, the separation of CO from synthetic gas mixtures of CO/CH (50:50 vol%) and CO/N (15:85 vol%) was performed for benchmarking, showing that the prepared HF-TFCM kept the separation performance of the 6FDA-TMPD thick membranes., We kindly acknowledge the funding of projects PID2019-105827RB- I00, PID2022-138028OB-I00, PID2020-118547GB-100, PID2019- 109403RB-C22, PID2019-109403RB-C21 by the Spanish State Research Agency and partially by the European Fund for Regional Development (EU), and the Regional Government of Castilla y Le´on (project VA224P20). F.P., S.V.G.H. and S.R.M acknowledge the support of the Spanish State Research Agency and the Spanish Ministry of Science and Innovation (grants IJC2020-043134-I, PRE2020-093568 and, FPU2019/ 05446 respectively). All authors kindly thank Dr. ´Angel E. Lozano for his advice with the selection of polymers and his helpful discussions and support. We would also like to thank 3M Company for generous dona- tion of polypropylene hollow fibers
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microporous Polymeric Networks Containing a Long-Term Stable AuI Catalyst for Enyne Cyclization

  • Rico-Martínez, S.
  • Ruiz, A.
  • López-Iglesias, B.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Miguel, J. A.
Two microporous polymer networks having a confined Au carbene catalyst were obtained and tested for the skeletal rearrangement of enynes. These catalysts were obtained from precursor porous organic polymers (POPs), a type of microporous polymer network, synthesized by the reaction of isatin or a mixture of isatin/trifluoroacetophenone (1:1) with triptycene (POP1 and POP2, respectively) through an electrophilic aromatic substitution, EAS, reaction promoted by trifluoromethanesulfonic acid. These precursors could be easily functionalized through the lactam moiety to form Au carbene catalysts (POP1-AuCarbene and POP2-AuCarbene). The confined carbenes proved to be very active for the skeletal rearrangement of dimethyl 2-(3-methyl-2-butenyl)-2-propinylmalonate enyne. A large increase in the stability of the Au catalysts was observed compared to those of most of the homogeneous catalysts described so far in the bibliography. This long-term stability was associated with the separation of Au atoms, induced by their confinement in the microporous networks. In particular, POP2-AuCarbene exhibited outstanding long-term stability, maintaining catalytic activity even after several months., This work was supported by Spain’s Agencia Estatal de Investigación [Projects PID2019-109403RB-C22 (AEI/ FEDER, UE) and PID2020-118547GB-I00 (AEI/FEDER, UE)] and by the Spanish Junta de Castilla y León (VA224P2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasticization resistant gas separation membranes derived from polyimides exhibiting polyethylene-oxide moieties

  • Matesanz-Niño, Laura
  • Webb, M. T.
  • González-Ortega, A.
  • Palacio, L.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Galizia, M.
Despite exhibiting excellent thermal/chemical stability, mechanical robustness, and easy processability, which makes them attractive candidates for gas separation applications, aromatic polyimides are susceptible to plasticization. This study proposes an effective approach to suppress CO-induced plasticization in a high fractional free volume (FFV) polyimide (PI*) derived from 4,4’-(hexafluoroisopropylidene)diphthalic anhydride and 2,4,6-trimethylphenyldiamine. PI* was first modified by incorporating 3,5-diaminobenzoic acid (DABA) and polyethylene oxide segments (PEO) into the polymer backbone, with the goal of partially removing PEO through high temperature (450 °C) pyrolysis, thereby increasing the membrane FFV and, simultaneously, providing enhanced plasticization resistance via DABA cross-linking. To mitigate the effects of themomechanical history, the membranes were aged prior to the thermal treatment process. However, the great enhancement in plasticization resistance was not accompanied by a parallel improvement in the separation performance relative to PI*. To address this shortcoming, a microporous organic polymer (POP) was blended with the polyimides to fabricate mechanically-robust mixed matrix membranes (MMMs). Remarkably, MMM plasticization was suppressed even without the aid of thermal crosslinking for PEO-containing PI*, which was rationalized by molecular simulation invoking the formation of hydrogen bonds between the lactam groups of the POP and PEO moieties., In occasion of his 70th birthday, we would like to dedicate this work to Prof. Gaetano Guerra. Gaetano, a member of the National Academy of “Lincei” of Italy, has been for five decades an eminent source of inspi- ration for the polymer international community. One of us, MG, had the great privilege to collaborate with him for a few years, during his stay in Naples. His contagious enthusiasm, optimism and crisp personality make him a valuable person and scientist. MTW and MG acknowledge financial support from the US National Science Foundation (NSF), Grant # 2005282 (CBET, Interfacial Engi- neering). This work was partially supported by the Spanish Government (AEI) through projects PID2019-109403RB-C21, PID2019-109403RB- C22, PID2020-118547 GB-I00, and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19, and VA224P20). L.M.N thanks the University of Valladolid for a mobility grant UVa- 2021. The authors also thank Salvador Azpeleta for the WAXS mea- surements taken at the LTI Facilities of the University of Valladolid, and Dr. Levi López for the NMR CPMAS spectra obtained at the Solid-State NMR facilities of ICTP-CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Morphological Study before and after Thermal Treatment of Polymer-Polymer Mixed-Matrix Membranes for Gas Separations

  • Prádanos, Pedro
  • Soto, Cenit
  • Carmona, Francisco Javier
  • Lozano, Ángel E.
  • Hernández, Antonio
  • Palacio, Laura
A good integration of the polymer materials that form a mixed-matrix membrane (MMM) for gas separation is essential to reaching interesting permselective properties. In this work, a porous polymer network (PPN), obtained by combining triptycene and trifluoroacetophenone, has been used as a filler, which was blended with two o-hydroxypolyamides (HPAs) that act as polymer matrices. These polymer matrices have been thermally treated to induce a thermal rearrangement (TR) of the HPAs to polybenzoxazoles (β-TR-PBOs) through a solid-state reaction. For its structural study, various techniques have been proposed that allow us to undertake a morphological investigation into the integration of these materials. To access the internal structure of the MMMs, three different methods were used: a polishing process for the material surface, the partial dissolution of the polymer matrix, or argon plasma etching. The argon plasma technique has not only revealed its potential to visualize the internal structure of these materials; it has also been proven to allow for the transformation of their permselective properties. Force modulation and phase contrast in lift-mode techniques, along with the topographic images obtained via the tapping mode using a scanning probe microscope (SPM), have allowed us to study the distribution of the filler particles and the interaction of the polymer and the filler. The morphological information obtained via SPM, along with that of other more commonly used techniques (SEM, TGA, DSC, FTIR, WASX, gas adsorption, and permeability measurements), has allowed us to postulate the most probable structural configuration in this type of system., This research was funded by the Spanish Government (AEI) through projects PID2019-109403RB-C21/AEI/10.13039/501100011033, PID2019-109403RB-C22/AEI/10.13039/501100011033, and TED2021-129340B-I00, as well as by the Regional Government of Castilla y León and the EU-FEDER program (CL-EI-2021-07, UIC082)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorinated Biphenyl Aromatic Polyimides for Gas Separation Applications: Real Gas Mixture Study

  • Rico-Martínez, S.
  • Rojas-Rodriguez, M.
  • Esteban, N.
  • Matesanz-Niño, L.
  • Juan y Seva, M.
  • Alexandrova, L.
  • Freeman, B. D.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Aguilar-Lugo, C.
Three aromatic polyimides (PIs) based on diamines containing a biphenyl unit and CF-groups in the m-position to amines and 6FDA of high-molecular weights were synthesized. The polymers differed by number of methyl-substituents in the biphenyl moiety, as 6FDA-BFAPB, PI without methyl substituents, 6FDA-4MeBFAPB, PI with four methyl groups, and 6FDA-4MeBFAPB, PI with six methyl groups. The comparative analysis of the polymer properties was performed with focus on their gas transport properties. All PIs demonstrated high thermostability, with decomposition temperature above 450 °C in an inert atmosphere and char yield of 45-50% but were readily soluble at room temperature even in common organic solvents. The T’s of PIs bearing methyl groups were notably higher than that of 6FDA-BFAPB, indicating their more rigid backbone chains. Detailed investigation of the PIs’ gas transport properties was also made for pure gases and real gas mixture in the wide interval of pressures. It was shown that introduction of the methyl substituents in the main polymer chain resulted in an important improvement of the gas transport properties; both methylated PIs were located much closer to the Robeson limit., This work was financially supported by the Mexico’s PAPIIT AG100323 and CONAHCyT CF-2023-G-220 projects. Also, this work was supported by Spain’s Agencia Estatal de Investigación (AEI) [projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), PID2020-118547GB-I00 (AEI/FEDER, UE), and by the Spanish Junta de Castilla y León (VA224P2)]. S.R.-M. thanks Spain’s Ministry of Science Innovation and Universities (MCIU) for a predoctoral FPU grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New rigid aromatic polyimides with nitrogen-rich bipyridine groups for carbon capture

  • Rico-Martínez, S.
  • Seong, J. G.
  • Álvarez, Cristina
  • Miguel, J. A.
  • Lee, Y. M.
  • Lozano López, Ángel Emilio
Over the last few decades, there has been a dramatic increase in CO emissions into the atmosphere, prompting intensified efforts toward CO capture. Membranes play a key role in carbon capture technologies due to their energy-effective separation, offering a promising approach to mitigate greenhouse gas emissions, even though the research continues for new materials with improved properties. Among the approaches to improve gas separation, the introduction of nitrogen (N) atoms in the polymer backbone has been demonstrated to be an efficient methodology for tailoring CO sorption affinity. Here, we propose a novel class of polyimides made from 4,4’-(hexafluoroisopropylidene)diphthalic anhydride (6F) with ortho-methyl diamines derived from N-rich 4,5-diazafluorene (DF) or a mixture of those with 2,2′-bis(4-aminophenyl)hexafluoropropane (6Fp) or 2,4,6-trimethyl-m-phenylenediamine (TMPD) in a 1:1 or 1:3 M ratio. The resulting polymers showed good solubility, excellent thermal stability, high glass transition temperatures, and mechanical properties robust enough. The homopolymer membrane derived from the fluorine-free DF moiety with four ortho methyl groups exhibited a 3-fold increase in CO permeability compared to the reference 6F6Fp membrane with slightly increased CO/N selectivity. More importantly, it showed enhancement in CO/N₂ mixed-gas selectivity by 40 % in a CO/N mixture. The four-month-long physical aging response of the selected DF-containing polyimide was also investigated. This work provides valuable insights on the design of monomers for gas separation materials., This work was financially supported by the Spanish Agencia Estatal de Investigación (Projects AEI/FEDER, UE, PID2023-149594OB-C22, PID2019-109403RB-C22, PID2019-109403RB-C21 and PID2020- 118547 GB-I00, by the Spanish Junta de Castilla y León (VA224P2), and by the Nano Materials Technology Development program (RS-2023- 00235295) through the NRF funded by the Ministry of Science and ICT of South Korea. S.R.-M. thanks Spain’s Ministry of Science, Innovation, and Universities for an FPU grant and a complementary FPU mobility aid.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidating the Molecular Mechanisms by which Porous Polymer Networks Affect Structure, Aging Propensity, and Selectivity of Microporous Glassy Polymer Membranes using a Multiscale Approach

  • Condes, L. C.
  • Webb, M. T.
  • Le, T. T. B.
  • Box, W. J.
  • Doherty, C. M.
  • Gali, A.
  • Garrido, Leoncio
  • Deng, J.
  • Matesanz-Niño, L.
  • Lozano López, Ángel Emilio
  • Álvarez, Cristina
  • Buongiorno Nardelli, M.
  • Striolo, A.
  • Hill, A. J.
  • Galizia, M.
Microporous glassy polymer membranes suffer from physical aging, which adversely affects their performance in the short time frame. We show that the aging propensity of a model microporous polymer, poly(1-trimethylsilyl-1-propyne) (PTMSP), can be effectively mitigated by blending with as little as 5 wt % porous polymer network (PPN) composed of triptycene and isatin. The aging behavior of these materials was monitored via N pure gas permeability measurements over the course of 3 weeks, showing a 14% decline in PTMSP blended with 5 wt % PPN vs a 41% decline in neat PTMSP. Noteworthy, PPNs are 2 orders of magnitude cheaper than the porous aromatic frameworks previously used to control PTMSP aging. A variety of experimental and computational techniques, such as Positron Annihilation Lifetime Spectroscopy (PALS), free volume measurements, cross-polarization/magic angle spinning (CP/MAS) C NMR, transport measurements and molecular dynamics (MD) simulations were used to uncover the molecular mechanisms leading to enhanced aging resistance. We show that partial PTMSP chain adsorption into the PPN porosity reduces the PTMSP local segmental mobility, leading to improved aging resistance. Permeability coefficients were broken into their elementary sorption and diffusion contributions, to elucidate the mechanism by which the reduced PTMSP local segmental mobility affects selectivity in gas separation applications. Finally, we demonstrate that in these systems, where both chemical and physical interactions take place, transport coefficients must be corrected for thermodynamic nonidealities to avoid erroneous interpretation of the results., M.G., A.S., T.T.B.L. and M.B.N. acknowledge financial support from the US Department of Energy (DOE, Office of Basic Energy Sciences) under grant No. DE-SC0024554. A.S. also acknowledges support from the Asahi Glass Chair of Chemical Engineering at the University of Oklahoma. Molecular simulations were performed at the Oklahoma Supercomputer Center for Education and Research (OSCER). The thermog- ravimetric analyzer setup used in this study was supported by the University of Oklahoma SEIP (Strategic Equipment Investment Program) Program. LCC acknowledges support from the National Science Foundation Graduate Research Fellowship Program (NSF-GRFP) under Grant No. 10557390. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation. L.M.N. and A.E.L. acknowledge support from the Spanish Government (AEI) through projects PID2019- 109403RB-C22/AEI/10.13039/501100011033, PID2019- 108552GB-I00, and PID2019-109403RB-C22/AEI/ 10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermally Rearranged (TR) Polybenzoxazoles from o‑Substituted Precursor Polyimides with Phenyl Pendant Groups: Synthesis, Properties, and Thermal Rearrangement Conditions

  • Rojas-Rodriguez, Mario
  • Rico-Martínez, Sandra
  • Prádanos, Pedro
  • Álvarez, Cristina
  • Alexandrova, Larissa
  • Lee, Young Moo
  • Lozano López, Ángel Emilio
  • Aguilar-Lugo, Carla
A series of polyimides (PIs) was synthesized from 6FDA and two o-OH substituted diamines having bulky pendant phenyl, Ph, and trifluoromethyl, CF3, groups as precursors for thermally rearranged polybenzoxazole, TR-PBO, membranes. One diamine had two pendant Ph substituents; in the other, the substituents were Ph and CF3. Applying azeotropic and chemical cyclizations allowed the obtention of four o-hydroxy (o-OH) or/and o-acetoxy (o-OAc) substituted PIs depending on the imidization method. The PIs were labeled as 3Ph-OH, 4Ph-OH, or 3Ph-OAc and 4PH-OAc, respectively. Thermal rearrangements of all four precursors were investigated in the interval from 350 to 450 °C. The conversions to TR-PBO increased with temperature, and almost quantitative conversions were obtained at temperatures close to 450 °C, although o-OH substituted PIs reached conversions slightly higher than those of o-OAc PIs at a given temperature. The TR-polymers’ fractional free volume (FFV) also increased with conversion but was higher for the o-OAc substituted precursors. Despite the high TR-PBO conversions, self-supported uniform TR membranes with reasonable mechanical properties were obtained, except for 4Ph-OH. Gas separation behavior of the membranes significantly improved after the thermal treatment, and the final CO2/CH4 permselectivities lay between the 1991 and 2008 Robeson upper bounds. Particularly, TR-membranes derived from o-OAc precursors and with pendant CF3 group demonstrated better gas transport properties with values of P(CO2) = 1121 barrer and αCO2/CH4 = 29 for 3Ph-OAc derived membrane, which positioned it beyond the 2008 upper limit., This work was financially supported by Mexico’s PAPIIT AG100323 and CONAHCyT CF-2023-G-220 projects. Also, this work was supported by Spain’s Agencia Estatal de Investigación (AEI) (Projects PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), and PID2020-118547GB-I00 (AEI/FEDER, UE) and by the Spanish Junta de Castilla y León (VA224P2). M.R-R. thanks CONAHCyT for Ph.D. Grant CVU 744153. S.R.-M. thanks to Spain’s Ministry of Science, Innovation, and Universities for the FPU grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Organic Polymers as Ionomers for High- Performance Alkaline Membrane Water Electrolysis

  • Rico-Martínez, Sandra
  • Cho, Hyeon Keun
  • Hu, Chuan
  • Lee, Young Jun
  • Miguel, Jesús A.
  • Lozano López, Ángel Emilio
  • Lee, Young Moo
Sustainable hydrogen production is focused on anion exchange membrane (AEM) water electrolyzers (AEMWEs), which still require more development to achieve high performance and durability. Here, we propose a novel class of porous organic polymers (POPs) as durable solid-ionomers for AEMWEs, which was prepared by reacting the 4-methylpiperidone with trifunctional or a mixture of trifunctional:difunctional aromatic monomers (in a 2 : 3 mol ratio). The resulting POP ionomers exhibited exceptional electrochemical properties and remarkable alkaline stability. Particularly noteworthy are the corresponding AEMWEs, which showed an outstanding current density of 13.4 A cm−2 at 2.0 V under 80 °C in 1 M KOH solution, which is the highest performance reported in the particulate-ionomers AEMWE state of the art. Moreover, they demonstrated durability at a current density of 0.5 A cm−2 for over 500 h with a voltage decay rate of 120 μV h−1. This work offers valuable perspectives on the designing of robust and high-performance solid-state ionomers through low-cost electrophilic aromatic substitution reactions for high-performance energy conversion devices., his work was supported by Spain’s Agencia Estatal de Investigación [Projects PID2019-109403RB-C22 (I/FEDER, UE), PID2019-109403RB-C21 and PID2020-118547GB-I00 (AEI/FEDER, UE)], by the Spanish Junta de Castilla y León (VA224P2). This work was also supported by the Nano·Materials Technology Development program (RS-2023-00235295) through the (NRF) funded by the Ministry of Science and ICT of South Korea. S.R.- M. thanks Spain’s Ministry of Science, Innovation, and Univer- sities for an FPU grant and a complementary FPU mobility ai, Peer reviewed