Pasar al contenido principal

DESARROLLO DE SISTEMAS AUTOORGANIZADOS CON PROPIEDADES FISICAS MEJORADAS Y POLIMEROS PARA APLICACIONES SOSTENIBLES EN CATALISIS Y SEPARACION DE GASES: DE MOLECULAS A MATERIALE

PID2020-118547GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VALLADOLID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas separation membranes obtained by partial pyrolysis of polyimides exhibiting polyethylene oxide moieties

  • Matesanz-Niño, Laura
  • Aguilar-Lugo, Carla
  • Prádanos, Pedro
  • Hernández, Antonio
  • Bartolomé, Camino
  • González de la Campa, José
  • Palacio, Laura
  • González-Ortega, Alfonso
  • Galizia, Michele
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
Aromatic copolyimides (PIx) and aromatic-aliphatic copolyimides (PIxEOy) were synthesized by reacting 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) with mixtures obtained from 2,2′-bis(4-aminophenyl)hexafluoropropane (6FpDA), 5-diaminobenzoic acid (DABA) and Jeffamine ED-2003 (PEO). The selective thermal removal of PEO from PIxEOy yielded membranes with high thermal stability and good mechanical properties. The presence of carboxylic groups minimized the shrinkage during the cross-linking process. The membranes containing 10 mol% DABA exhibited good O2/N2 and CO2/CH4 separation performance, and resistance to CO2 plasticization. PIx/PIxEOy blends containing less than 10 wt% PEO were prepared. The CO2/CH4 selectivity/permeability balance of cross-linked membranes largely exceeded that of PIx. The results highlight a possible strategy for using analogous cross-linkable polymers exhibiting ethylene oxide moieties as mere additive to prepare high free volume polyimide's membranes, exhibiting enhanced separation properties and high resistance to plasticization., This work was supported by the Spanish Government (AEI) through projects PID2019-109403RB-C21, PID2019-109403RB-C22 and PID2020-118547 GB-I00, and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19 and VA224P20). M.G. acknowledges support of this work from the University of Oklahoma (VPR Office, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Matrix Membranes Loaded with a Porous Organic Polymer Having Bipyridine Moieties

  • Rico-Martínez, S.
  • Álvarez, Cristina
  • Hernández, Antonio
  • Miguel, Jesús A.
  • Lozano López, Ángel Emilio
Mixed matrix membranes (MMMs), derived from three aromatic polyimides (PIs), and an affordable porous organic polymer (POP) having basic bipyridine moieties were prepared. Matrimid and two fluorinated polyimides, which were derived from 4,4′-(hexafluoroisopropylidene)diphthalic anhydride and 2,2′-bis(4-aminophenyl)hexafluoropropane (6F6F) or 2,4,6-trimethyl-m-phenylenediamine (6FTMPD), were employed as polymer matrixes. The used POP was a highly microporous material (surface area of 805 m g) with excellent thermal and chemical stability. The MMMs showed good compatibility between the PIs and POP, high thermal stabilities and glass transition temperatures superior to those of the neat PI membranes, and good mechanical properties. The addition of POP to the matrix led to an increase in the gas diffusivity and, thus, in permeability, which was associated with an increase in the fractional free volume of MMMs. The increase in permeability was higher for the less permeable matrix. For example, at 30 wt.% of POP, the permeability to CO and CH of the MMMs increased by 4-and 7-fold for Matrimid and 3-and 4-fold for 6FTMPD. The highest CH permeability led to a decrease in CO/CH selectivity. The CO/N separation performance was interesting, as the selectivity remained practically constant. Finally, the POP showed no molecular sieving effect towards the CH/CH and CH/CH gas pairs, but the permeability increased by about 4-fold and the selectivity was close to that of the matrix. In addition, because the POP can form metal ion bipyridine complexes, modified POP-based MMMs could be employed for olefin/paraffin separations., This work was supported by the Spanish Government (AEI) through projects PID2019- 109403RB-C21, PID2019-109403RB-C22, and PID2020-118547GB-I00, and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19 and VA224P2
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyrrolidine-based catalytic microporous polymers in sustainable C[dbnd]N and C[dbnd]C bond formation via iminium and enamine activation

  • Vargas, E. L.
  • Esteban, Noelia
  • Cencerrero, J.
  • Francés, V.
  • Álvarez, Cristina
  • Miguel, Jesús A.
  • Gallardo Ruiz, Alberto
  • Lozano López, Ángel Emilio
  • Cid, M. B.
A new set of catalytic materials having a pyrrolidine moiety confined in microporous organic polymer networks (POPs) has been attained. These catalytic polymers have been prepared by a straightforward synthesis starting from microporous polymer networks made from isatin (or a mixture of isatin and trifluoroacetophenone) and 1,3,5-triphenylbenzene. The polymers efficiently catalyzed the formation of nitrones under very mild and sustainable conditions using green solvents through an iminium ion activation mechanism. The reactions are scalable, and polymers are easily recycled. Special attention has been paid to understanding all the factors that could affect the efficiency of the confined catalysts. The electronic and conformational characteristics of the pyrrolidine moiety attached to the porous polymers, as well as other features that could affect the transport through the network, such as molecular volume and shape of reactants and products, and even hydrophilic or hydrophobic properties, have been systematically evaluated. In addition, the heterogeneous polymers are also useful in C[dbnd]C bond formation through both iminium ion and enamine activation., We acknowledge the Spanish Government (Agencia Estatal de Investigación projects; CTQ2016-78779-R, PID2019-109403RB-C22, RTI2018-096328-B-I00, CTQ2017-89217-P and PID2020-118547GB- I00), and the Regional Government of Castilla y León (project CyL and EU-FEDER program VA224P20), for financial support. E. L. Vargas thanks University of Costa Rica for a PhD scholarship. We must thank Rebecca Chevillard and Valentina Petrelli for some preliminary experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triphenylene-ethylammonium tetrachlorometallate salts: multicolumnar mesophases, thermochromism and Langmuir films

  • Barcenilla, María
  • Baena, María Jesús
  • Donnio, Bertrand
  • Heinrich, Benoît
  • Gutiérrez, Lucía
  • Coco, Silveiro
  • Espinet, Pablo
This article is part of the themed collection: Journal of Materials Chemistry C HOT Papers., This study reports new mesomorphic benzylethylammonium salts containing a 2,3,6,7,10-pentakis(dodecyloxy)-11-(hexyloxy)triphenylene unit and Cl− or [MCl4]2− (M = Cu, Ni, Co, Mn) as counterions. They show a rich columnar polymesomorphism, characterized by polarized optical microscopy (POM), differential scanning calorimetry (DSC), and small- and wide-angle X-ray scattering (S/WAXS). All the compounds self-organize into multisegregated structures in the solid state and in the mesophases, with the alternation within large superlattices of triphenylene-containing columns and benzylammonium chloride or tetrachorometallate fragments. Interestingly, the nickel derivative displays a continuous and reversible thermochromic behavior in the range of 50–80 °C. Magnetic measurements and UV-Vis data at different temperatures, support changes in the coordination sphere of the Ni(II) atom from octahedral to tetrahedral. Furthermore, these systems form stable and homogeneous Langmuir films at the air–water interface. These films have been successfully transferred onto solid substrates giving rise to nanostructured LB films with a clearly defined bilayer structure in which each layer consists of molecular columns aligned along the surface., This work was sponsored by the Ministerio de Ciencia e Innovación (Project PID2020-118547GB-I00) and the Junta de Castilla y León (Project VA224P20). M. B. thanks the Junta de Castilla y León for a PhD grant. BD and BH thank CNRS and the University of Strasbourg for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aromatic Polyimide Membranes with tert-Butyl and Carboxylic Side Groups for Gas Separation Applications—Covalent Crosslinking Study

  • Esteban, Noelia
  • Juan-y-Seva, Marta
  • Aguilar-Lugo, Carla
  • Miguel, Jesús A.
  • Staudt, Claudia
  • Campa, José G. de la
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
A set of aromatic copolyimides was obtained by reaction of 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), and mixtures of the diamines 1,4-bis(4-amino-2-trifluoromethylphenoxy)-2,5-di-tert-butylbenzene (CFTBAPB) and 3,5-diamino benzoic acid (DABA). These polymers were characterized and compared with the homopolymer derived from 6FDA and CFTBAPB. All copolyimides showed high molecular weight values and good mechanical properties. The presence of carboxylic groups in these copolymers allowed their chemical crosslinking by reaction with 1,4-butanediol. Glass transition temperatures (Tg) were higher than 260 °C, showing the non-crosslinked copolyimides had the highest Tg values. Degradation temperature of crosslinked copolyimides was lower than their corresponding non-crosslinked ones. Mechanical properties of all polymers were good, and thus, copolyimide (precursor, and crosslinked ones) films could be tested as gas separation membranes. It was observed that CO permeability values were around 100 barrer. Finally, the plasticization resistance of the crosslinked material having a large number of carboxylic groups was excellent., This research was funded by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE) and PID2020-118547GB-I00 (AEI/FEDER, UE)) and by the Spanish Junta de Castilla y León (VA224P20), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Insights in the Synthesis of High-Molecular-Weight Aromatic Polyamides-Improved Synthesis of Rod-like PPTA

  • Hernández, Guiomar
  • Ferrero, Sergio
  • Reinecke, Helmut
  • Bartolomé, Camino
  • Martínez-Ilarduya, Jesús M.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
By employing a variation of the polyamidation method using in situ silylated diamines and acid chlorides, it was possible to obtain a rod-type polyamide: poly(p-phenylene terephthalamide) (PPTA, a polymer used in the high-value-added material Kevlar), with a molecular weight much higher than that obtained with the classical and industrial polyamidation method. The optimization of the method has consisted of using, together with the silylating agent, a mixture of pyridine and a high-pKa tertiary amine. The research was complemented by a combination of nuclear magnetic resonance and molecular simulation studies, which determined that the improvements in molecular weight derive mainly from the formation of silylamide groups in the growing polymer., This research was funded by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), and PID2020-118547GB-I00 (AEI/FEDER, UE)) and by the Spanish Junta de Castilla y León (VA224P20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium Catalysts Supported in Microporous Phosphine Polymer Networks

  • Esteban, Noelia
  • Claros, Miguel
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Bartolomé, Camino
  • Martínez-Ilarduya, Jesús M.
  • Miguel, Jesús A.
A new set of microporous organic polymers (POPs) containing diphosphine derivatives synthesized by knitting via Friedel–Crafts has been attained. These amorphous three-dimensional materials have been prepared by utilizing diphosphines, 1,3,5-triphenylbenzene, and biphenyl as nucleophile aromatic groups, dimethoxymethane as the electrophilic linker, and FeCl3 as a promoting catalyst. These polymer networks display moderate thermal stability and high microporosity, boasting BET surface areas above 760 m2/g. They are capable of coordinating with palladium acetate, using the phosphine derivative as an anchoring center, and have proven to be highly efficient catalysts in Suzuki–Miyaura coupling reactions involving bromo- and chloroarenes under environmentally friendly (using water and ethanol as solvents) and aerobic conditions. These supported catalysts have achieved excellent turnover numbers (TON) and turnover frequencies (TOF), while maintaining good recyclability without significant loss of activity or Pd leaching after five consecutive reaction cycles., This research was funded by Spain’s Agencia Estatal de Investigación (AEI) (Projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), and PID2020-118547GB-I00 (AEI/FEDER, UE)) and by the Spanish Junta de Castilla y León (VA224P20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

6FDA-polyimide thin-film composite hollow fiber membranes for hydrofluorocarbons and CO2 separations

  • Gutiérrez-Hernández, S. V.
  • Rico-Martínez, S.
  • Pardo, F.
  • Álvarez, Cristina
  • Miguel, J. A.
  • Zarca, G.
  • Urtiaga, A.
Herein, high molecular weight fluorinated aromatic polyimides were assessed for the first time to recover difluoromethane (R-32) from its blends with other hydrofluorocarbons and hydrofluoroolefins (R-134a: 1,1,1,2-tetrafluoroethane, R-125: pentafluoroethane, and R-1234yf: 2,3,3,3-tetrafluoropropene). First, a screening was performed with thick flat membranes made of the 4,4’-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and three different amines: 2,2′-bis(4-aminophenyl)hexafluoropropane (6FpDA), 2,4,6-trimethyl-m-phenylenediamine (TMPD), and 2,3,5,6-tetramethyl-1,3-phenyldiamine (durene). As a result, 6FDA-TMPD was selected for the fabrication of defect-free hollow fiber-thin film composite membranes (HF-TFCM) due to its superior performance for the separation of R-32. These HF-TFCMs showed excellent separation performance to reclaim high-purity R-32 (permeate concentration >99 vol%) from the commercial binary blends R-410A and R-454B (a mixture of R-32 and R-1234yf). In addition, we report for the first time the membrane recovery of R-32 from the ternary blend R-407C (R-32/R-134a/R-125 38.2:43.8:18 vol%). Eventually, the separation of CO from synthetic gas mixtures of CO/CH (50:50 vol%) and CO/N (15:85 vol%) was performed for benchmarking, showing that the prepared HF-TFCM kept the separation performance of the 6FDA-TMPD thick membranes., We kindly acknowledge the funding of projects PID2019-105827RB- I00, PID2022-138028OB-I00, PID2020-118547GB-100, PID2019- 109403RB-C22, PID2019-109403RB-C21 by the Spanish State Research Agency and partially by the European Fund for Regional Development (EU), and the Regional Government of Castilla y Le´on (project VA224P20). F.P., S.V.G.H. and S.R.M acknowledge the support of the Spanish State Research Agency and the Spanish Ministry of Science and Innovation (grants IJC2020-043134-I, PRE2020-093568 and, FPU2019/ 05446 respectively). All authors kindly thank Dr. ´Angel E. Lozano for his advice with the selection of polymers and his helpful discussions and support. We would also like to thank 3M Company for generous dona- tion of polypropylene hollow fibers
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microporous Polymeric Networks Containing a Long-Term Stable AuI Catalyst for Enyne Cyclization

  • Rico-Martínez, S.
  • Ruiz, A.
  • López-Iglesias, B.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Miguel, J. A.
Two microporous polymer networks having a confined Au carbene catalyst were obtained and tested for the skeletal rearrangement of enynes. These catalysts were obtained from precursor porous organic polymers (POPs), a type of microporous polymer network, synthesized by the reaction of isatin or a mixture of isatin/trifluoroacetophenone (1:1) with triptycene (POP1 and POP2, respectively) through an electrophilic aromatic substitution, EAS, reaction promoted by trifluoromethanesulfonic acid. These precursors could be easily functionalized through the lactam moiety to form Au carbene catalysts (POP1-AuCarbene and POP2-AuCarbene). The confined carbenes proved to be very active for the skeletal rearrangement of dimethyl 2-(3-methyl-2-butenyl)-2-propinylmalonate enyne. A large increase in the stability of the Au catalysts was observed compared to those of most of the homogeneous catalysts described so far in the bibliography. This long-term stability was associated with the separation of Au atoms, induced by their confinement in the microporous networks. In particular, POP2-AuCarbene exhibited outstanding long-term stability, maintaining catalytic activity even after several months., This work was supported by Spain’s Agencia Estatal de Investigación [Projects PID2019-109403RB-C22 (AEI/ FEDER, UE) and PID2020-118547GB-I00 (AEI/FEDER, UE)] and by the Spanish Junta de Castilla y León (VA224P2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasticization resistant gas separation membranes derived from polyimides exhibiting polyethylene-oxide moieties

  • Matesanz-Niño, Laura
  • Webb, M. T.
  • González-Ortega, A.
  • Palacio, L.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Galizia, M.
Despite exhibiting excellent thermal/chemical stability, mechanical robustness, and easy processability, which makes them attractive candidates for gas separation applications, aromatic polyimides are susceptible to plasticization. This study proposes an effective approach to suppress CO-induced plasticization in a high fractional free volume (FFV) polyimide (PI*) derived from 4,4’-(hexafluoroisopropylidene)diphthalic anhydride and 2,4,6-trimethylphenyldiamine. PI* was first modified by incorporating 3,5-diaminobenzoic acid (DABA) and polyethylene oxide segments (PEO) into the polymer backbone, with the goal of partially removing PEO through high temperature (450 °C) pyrolysis, thereby increasing the membrane FFV and, simultaneously, providing enhanced plasticization resistance via DABA cross-linking. To mitigate the effects of themomechanical history, the membranes were aged prior to the thermal treatment process. However, the great enhancement in plasticization resistance was not accompanied by a parallel improvement in the separation performance relative to PI*. To address this shortcoming, a microporous organic polymer (POP) was blended with the polyimides to fabricate mechanically-robust mixed matrix membranes (MMMs). Remarkably, MMM plasticization was suppressed even without the aid of thermal crosslinking for PEO-containing PI*, which was rationalized by molecular simulation invoking the formation of hydrogen bonds between the lactam groups of the POP and PEO moieties., In occasion of his 70th birthday, we would like to dedicate this work to Prof. Gaetano Guerra. Gaetano, a member of the National Academy of “Lincei” of Italy, has been for five decades an eminent source of inspi- ration for the polymer international community. One of us, MG, had the great privilege to collaborate with him for a few years, during his stay in Naples. His contagious enthusiasm, optimism and crisp personality make him a valuable person and scientist. MTW and MG acknowledge financial support from the US National Science Foundation (NSF), Grant # 2005282 (CBET, Interfacial Engi- neering). This work was partially supported by the Spanish Government (AEI) through projects PID2019-109403RB-C21, PID2019-109403RB- C22, PID2020-118547 GB-I00, and by the Regional Government of Castilla y León and the EU-FEDER program (CLU2017-09, UIC082, VA088G19, and VA224P20). L.M.N thanks the University of Valladolid for a mobility grant UVa- 2021. The authors also thank Salvador Azpeleta for the WAXS mea- surements taken at the LTI Facilities of the University of Valladolid, and Dr. Levi López for the NMR CPMAS spectra obtained at the Solid-State NMR facilities of ICTP-CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorinated Biphenyl Aromatic Polyimides for Gas Separation Applications: Real Gas Mixture Study

  • Rico-Martínez, S.
  • Rojas-Rodriguez, M.
  • Esteban, N.
  • Matesanz-Niño, L.
  • Juan y Seva, M.
  • Alexandrova, L.
  • Freeman, B. D.
  • Álvarez, Cristina
  • Lozano López, Ángel Emilio
  • Aguilar-Lugo, C.
Three aromatic polyimides (PIs) based on diamines containing a biphenyl unit and CF-groups in the m-position to amines and 6FDA of high-molecular weights were synthesized. The polymers differed by number of methyl-substituents in the biphenyl moiety, as 6FDA-BFAPB, PI without methyl substituents, 6FDA-4MeBFAPB, PI with four methyl groups, and 6FDA-4MeBFAPB, PI with six methyl groups. The comparative analysis of the polymer properties was performed with focus on their gas transport properties. All PIs demonstrated high thermostability, with decomposition temperature above 450 °C in an inert atmosphere and char yield of 45-50% but were readily soluble at room temperature even in common organic solvents. The T’s of PIs bearing methyl groups were notably higher than that of 6FDA-BFAPB, indicating their more rigid backbone chains. Detailed investigation of the PIs’ gas transport properties was also made for pure gases and real gas mixture in the wide interval of pressures. It was shown that introduction of the methyl substituents in the main polymer chain resulted in an important improvement of the gas transport properties; both methylated PIs were located much closer to the Robeson limit., This work was financially supported by the Mexico’s PAPIIT AG100323 and CONAHCyT CF-2023-G-220 projects. Also, this work was supported by Spain’s Agencia Estatal de Investigación (AEI) [projects: PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), PID2020-118547GB-I00 (AEI/FEDER, UE), and by the Spanish Junta de Castilla y León (VA224P2)]. S.R.-M. thanks Spain’s Ministry of Science Innovation and Universities (MCIU) for a predoctoral FPU grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New rigid aromatic polyimides with nitrogen-rich bipyridine groups for carbon capture

  • Rico-Martínez, S.
  • Seong, J. G.
  • Álvarez, Cristina
  • Miguel, J. A.
  • Lee, Y. M.
  • Lozano López, Ángel Emilio
Over the last few decades, there has been a dramatic increase in CO emissions into the atmosphere, prompting intensified efforts toward CO capture. Membranes play a key role in carbon capture technologies due to their energy-effective separation, offering a promising approach to mitigate greenhouse gas emissions, even though the research continues for new materials with improved properties. Among the approaches to improve gas separation, the introduction of nitrogen (N) atoms in the polymer backbone has been demonstrated to be an efficient methodology for tailoring CO sorption affinity. Here, we propose a novel class of polyimides made from 4,4’-(hexafluoroisopropylidene)diphthalic anhydride (6F) with ortho-methyl diamines derived from N-rich 4,5-diazafluorene (DF) or a mixture of those with 2,2′-bis(4-aminophenyl)hexafluoropropane (6Fp) or 2,4,6-trimethyl-m-phenylenediamine (TMPD) in a 1:1 or 1:3 M ratio. The resulting polymers showed good solubility, excellent thermal stability, high glass transition temperatures, and mechanical properties robust enough. The homopolymer membrane derived from the fluorine-free DF moiety with four ortho methyl groups exhibited a 3-fold increase in CO permeability compared to the reference 6F6Fp membrane with slightly increased CO/N selectivity. More importantly, it showed enhancement in CO/N₂ mixed-gas selectivity by 40 % in a CO/N mixture. The four-month-long physical aging response of the selected DF-containing polyimide was also investigated. This work provides valuable insights on the design of monomers for gas separation materials., This work was financially supported by the Spanish Agencia Estatal de Investigación (Projects AEI/FEDER, UE, PID2023-149594OB-C22, PID2019-109403RB-C22, PID2019-109403RB-C21 and PID2020- 118547 GB-I00, by the Spanish Junta de Castilla y León (VA224P2), and by the Nano Materials Technology Development program (RS-2023- 00235295) through the NRF funded by the Ministry of Science and ICT of South Korea. S.R.-M. thanks Spain’s Ministry of Science, Innovation, and Universities for an FPU grant and a complementary FPU mobility aid.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermally Rearranged (TR) Polybenzoxazoles from o‑Substituted Precursor Polyimides with Phenyl Pendant Groups: Synthesis, Properties, and Thermal Rearrangement Conditions

  • Rojas-Rodriguez, Mario
  • Rico-Martínez, Sandra
  • Prádanos, Pedro
  • Álvarez, Cristina
  • Alexandrova, Larissa
  • Lee, Young Moo
  • Lozano López, Ángel Emilio
  • Aguilar-Lugo, Carla
A series of polyimides (PIs) was synthesized from 6FDA and two o-OH substituted diamines having bulky pendant phenyl, Ph, and trifluoromethyl, CF3, groups as precursors for thermally rearranged polybenzoxazole, TR-PBO, membranes. One diamine had two pendant Ph substituents; in the other, the substituents were Ph and CF3. Applying azeotropic and chemical cyclizations allowed the obtention of four o-hydroxy (o-OH) or/and o-acetoxy (o-OAc) substituted PIs depending on the imidization method. The PIs were labeled as 3Ph-OH, 4Ph-OH, or 3Ph-OAc and 4PH-OAc, respectively. Thermal rearrangements of all four precursors were investigated in the interval from 350 to 450 °C. The conversions to TR-PBO increased with temperature, and almost quantitative conversions were obtained at temperatures close to 450 °C, although o-OH substituted PIs reached conversions slightly higher than those of o-OAc PIs at a given temperature. The TR-polymers’ fractional free volume (FFV) also increased with conversion but was higher for the o-OAc substituted precursors. Despite the high TR-PBO conversions, self-supported uniform TR membranes with reasonable mechanical properties were obtained, except for 4Ph-OH. Gas separation behavior of the membranes significantly improved after the thermal treatment, and the final CO2/CH4 permselectivities lay between the 1991 and 2008 Robeson upper bounds. Particularly, TR-membranes derived from o-OAc precursors and with pendant CF3 group demonstrated better gas transport properties with values of P(CO2) = 1121 barrer and αCO2/CH4 = 29 for 3Ph-OAc derived membrane, which positioned it beyond the 2008 upper limit., This work was financially supported by Mexico’s PAPIIT AG100323 and CONAHCyT CF-2023-G-220 projects. Also, this work was supported by Spain’s Agencia Estatal de Investigación (AEI) (Projects PID2019-109403RB-C22 (AEI/FEDER, UE), PID2019-109403RB-C21 (AEI/FEDER, UE), and PID2020-118547GB-I00 (AEI/FEDER, UE) and by the Spanish Junta de Castilla y León (VA224P2). M.R-R. thanks CONAHCyT for Ph.D. Grant CVU 744153. S.R.-M. thanks to Spain’s Ministry of Science, Innovation, and Universities for the FPU grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Organic Polymers as Ionomers for High- Performance Alkaline Membrane Water Electrolysis

  • Rico-Martínez, Sandra
  • Cho, Hyeon Keun
  • Hu, Chuan
  • Lee, Young Jun
  • Miguel, Jesús A.
  • Lozano López, Ángel Emilio
  • Lee, Young Moo
Sustainable hydrogen production is focused on anion exchange membrane (AEM) water electrolyzers (AEMWEs), which still require more development to achieve high performance and durability. Here, we propose a novel class of porous organic polymers (POPs) as durable solid-ionomers for AEMWEs, which was prepared by reacting the 4-methylpiperidone with trifunctional or a mixture of trifunctional:difunctional aromatic monomers (in a 2 : 3 mol ratio). The resulting POP ionomers exhibited exceptional electrochemical properties and remarkable alkaline stability. Particularly noteworthy are the corresponding AEMWEs, which showed an outstanding current density of 13.4 A cm−2 at 2.0 V under 80 °C in 1 M KOH solution, which is the highest performance reported in the particulate-ionomers AEMWE state of the art. Moreover, they demonstrated durability at a current density of 0.5 A cm−2 for over 500 h with a voltage decay rate of 120 μV h−1. This work offers valuable perspectives on the designing of robust and high-performance solid-state ionomers through low-cost electrophilic aromatic substitution reactions for high-performance energy conversion devices., his work was supported by Spain’s Agencia Estatal de Investigación [Projects PID2019-109403RB-C22 (I/FEDER, UE), PID2019-109403RB-C21 and PID2020-118547GB-I00 (AEI/FEDER, UE)], by the Spanish Junta de Castilla y León (VA224P2). This work was also supported by the Nano·Materials Technology Development program (RS-2023-00235295) through the (NRF) funded by the Ministry of Science and ICT of South Korea. S.R.- M. thanks Spain’s Ministry of Science, Innovation, and Univer- sities for an FPU grant and a complementary FPU mobility ai, Peer reviewed