Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric performance boost by chemical order in epitaxial L21 (100) and (110) oriented undoped Fe2VAl thin films: an experimental and theoretical study

  • Domínguez-Vázquez, José María
  • Caballero-Calero, Olga
  • Lohani, Ketan
  • Plata, José J.
  • Marquez, Antonio M.
  • Manzano, Cristina V.
  • Tenaguillo Arrese, Miguel Ángel
  • Ohta, Hiromichi
  • Cebollada, Alfonso
  • Conca, André
  • Martín-González, Marisol
This study demonstrates the direct correlation between the presence of the L21 ordered phase and the significant enhancement in the thermoelectric performance of Fe2VAl thin films deposited on MgO and Al2O3 substrates at temperatures varying between room temperature and 950 °C. We employ both experimental techniques and computational modeling to analyze the influence of crystallographic orientation and deposition temperature on the thermoelectric properties, including the Seebeck coefficient, electrical conductivity, and thermal conductivity. Our findings indicate that the presence of the L21 phase significantly enhances the power factor (PF) and figure of merit (zT), surpassing previously reported values for both bulk and thin film forms of Fe2VAl, achieving a PF of 480 μW m-1 K-2 and a zT of 0.025., The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). This work was funded by projects THERMHEUS grant TED2021-131746B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and ERC Adv. POWERbyU grant agreements ID: 101052603 funded by European Research Council (ERC), and grant PID2022-138063OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. We gratefully acknowledge the computer resources at Lusitania (Cenits-COMPUTAEX), Red Española de Supercomputaci´on, RES (QHS-2023-1-0028) and Albaic´ın (Centro de Servicios de Inform´atica y Redes de Comunicaciones – CSIRC, Universidad de Granada)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Thermoelectric performance boost by chemical order in epitaxial L21 (100) and (110) oriented undoped Fe2VAl thin films: an experimental and theoretical study [Dataset]

  • Domínguez-Vázquez, José María
  • Caballero-Calero, Olga
  • Lohani, Ketan
  • Plata, José J.
  • Marquez, Antonio M.
  • Manzano, Cristina V.
  • Tenaguillo Arrese, Miguel Ángel
  • Ohta, Hiromichi
  • Cebollada, Alfonso
  • Conca, André
  • Martín-González, Marisol
According to the open access nature and its exceptions in the datasets regulation of the Call ERC-2021-ADG, and having reflected the following statements in the Data Management Plan of such project (ID: 101052603; POWERbyU; ERC-2021-ADG), the authors of the data associated with this publication state the following: The datasets associated with this publication will be available upon request, due to these datasets being subjected to Intellectual Property Restrictions; requests by externals for the use of these datasets will be approved by the project coordinator. Please, contact Prof. Marisol Martín-González: marisol.martin@csic.es This modus operandi will remain in effect, at least until the end of the project., This Dataset refers to the following study which demonstrates the direct correlation between the presence of the L21 ordered phase and the significant enhancement in the thermoelectric performance of Fe2VAl thin films deposited on MgO and Al2O3 substrates at temperatures varying between room temperature and 950 °C. The researchers employ both experimental techniques and computational modeling to analyze the influence of crystallographic orientation and deposition temperature on the thermoelectric properties, including the Seebeck coefficient, electrical conductivity, and thermal conductivity. Their findings indicate that the presence of the L21 phase significantly enhances the power factor (PF) and figure of merit (zT), surpassing previously reported values for both bulk and thin film forms of Fe2VAl, achieving a PF of 480 μW m−1 K−2 and a zT of 0.025., The authors would also like to acknowledge the service from the MiNa Laboratory at IMN, and its funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). This work was funded by projects THERMHEUS grant TED2021-131746B-I00 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and ERC Adv. POWERbyU grant agreements ID: 101052603 funded by European Research Council (ERC), and grant PID2022-138063OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. We gratefully acknowledge the computer resources at Lusitania (Cenits-COMPUTAEX), Red Española de Supercomputación, RES (QHS-2023-1-0028) and Albaicín (Centro de Servicios de Informática y Redes de Comunicaciones – CSIRC, Universidad de Granada)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dip-in Nanomechanical Probes for Mass Characterization of Nanoparticles in Ultra-Low Volume Liquid Suspensions

  • Molina, Juan
  • Escobar, Javier E.
  • Kosaka, Priscila M.
  • Malvar, Óscar
  • Ruz, José J.
  • Tamayo, Javier
  • San Paulo, Álvaro
  • Calleja, Montserrat
The mass of nanoparticles has a critical influence on their phenomenology and functional performance, driving the need for measurement tools that combine high-throughput with high-resolution single-particle analysis. Mass characterization of large nanoparticle populations under such demands remains a persistent challenge, particularly for nanoparticles of large mass, where consolidated techniques encounter limitations. Here, a dip-in nanomechanical probe sensing approach for weighing nanoparticles in liquid suspensions which simultaneously provides high mass resolution and sensing rate is demonstrated. The method relies on nanoparticle transfer to nanowire resonator probes via iterative immersion into the suspension, requiring minimal volume and resulting in negligible losses. It also introduces ionic liquids as suspension media, enabling vacuum operation for optimizing mass resolution through single-mode resonance frequency tracking of the probes. Additionally, implementing acoustofluidic actuation on the suspension regulates nanoparticle adsorption/desorption during immersion, significantly enhancing the sensing rate. Measurements of 30 nm gold nanoparticles demonstrate accurate characterization of their mass distribution with a probe resolution of 0.1 ag, a sensing rate of 38 NPs min-1, and a sample volume of a few nanoliters. The concurrent advances in all these performance characteristics reveal the potential of dip-in nanomechanical probes for precise and fast characterization of individual nanoparticles over a wide mass range., This work was supported by the European Union (HORIZON-EIC-2022-PATHFINDEROPEN Project VIRUSONG 101099058 and ERC-2023-PoC Project VIR-Quantify 101157423) and by the Spanish MCIN (project AEROMECH PID2021-128395OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER-UE with related predoctoral grant PRE2022-101661; project VIROMECH PDC2022-133944-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/ PRTR). We acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiparametric quantification of bacterial cells using digital holographic microscopy

  • Cano-Tortajada, Álvaro
  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
The detection and quantification of the physical properties of bacterial cells are crucial for advancing precision microbiology. Here, we use digital holographic microscopy (DHM) to measure the dry mass of individual Staphylococcus epidermidis (S. epidermidis) and Escherichia coli (E. coli) cells with high throughput and rapid acquisition. We demonstrate that by processing quantitative phase images with polynomial background correction, Gaussian filtering, and adaptive masking, we are able to obtain, not only the dry mass of individual bacterial cells, but also detailed morphological information. These features allow the discrimination between single and clustered cocci, as well as the identification of elongation patterns in bacilli, that may provide relevant indicators of bacterial growth and physiological state. Finally, we compare the DHM dry mass distribution with those obtained by nanomechanical mass spectrometry (NMS), highlighting the potential and limitations of each technique., This work was supported by the European Union through HORIZON-EIC-2022-PATHFINDEROPEN Project VIRUSONG 101099058, by the Spanish MCIN through projects “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCODEEPLASM” (PLEC2021–007892/MCIN/AEI/10.13039/501100011033/European Union/ Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid (S2022/BMD-7437, i-LUNG 20). This work has also been supported by FERO Fundación Elena Torres Cancer Association funding. We acknowledge the service from MiNa Laboratory at IMN, and founding from EU (FEDER, FSE), MCIN/AEI/10.13039/50110001.1033 and Next Generation EU/PRTR (EQC2021-006944-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanocolumnar ZnO/Fe Magnetic Composites

  • Kaidatzis, Andreas
  • Garrido-Segovia, María
  • García-Martín, José Miguel
  • Diamantopoulos, Nikolaos C.
  • Theodoropoulos, Dimitrios-Panagiotis
  • Poulopoulos, Panagiotis
This article belongs to the Section Magnetic Materials, Composite ZnO/Fe nanostructured thin films are synthesized via physical vapor deposition using radio frequency magnetron sputtering in conventional, as well as in glancing angle deposition (GLAD) geometries. ZnO is employed as a compact nanocolumnar template to direct Fe growth in bilayer and multilayer architectures. Morphological analysis reveals well-defined ZnO/Fe interfaces for normal deposition geometry, with diminished interface clarity and reduced layer thickness in GLAD samples. Crystallographic characterization indicates clear ZnO-{002} and α-Fe-{110} texture. Magnetostatic characterization investigates the effects of morphology on coercivity and domain nucleation. GLAD-deposited Fe films exhibit clear in-plane magnetic anisotropy, with remanence to saturation magnetization (MREM/MSAT) equal to 1 for the easy axis and equal to 0.24 for the hard axis, consistent with inclined nanocolumn morphology. Our findings show that deposition geometry, rather the ZnO template, mostly affects the morphology of Fe films. The above, highlight the potential of engineered ZnO/Fe nanocomposites for magnetic, spintronic, and magnetoplasmonic applications, by tuning morphology and interface quality through deposition parameters., This research has been funded by the funding programme “MEDICUS” (project 83887), of the University of Patras. J.M.G.-M. acknowledges the grant PID2021-126524NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A Way of Making Europe”. We acknowledge the service from the MiNa Laboratory at IMN, and the funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). The Ministerio de Universidades has also supported this work through a Formación de Profesorado Universitario (FPU21/00272) grant (M.G.-S.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Template-Assisted 3D-PVDF Nanonetworks for Passive Daytime Radiative Cooling

  • Iglesias-Elcano, Amaia
  • Moreno-Sanabria, Luis
  • Martín-González, Marisol
  • Manzano, Cristina V.
Passive daytime radiative cooling (PDRC), which dissipates heat through infrared emission to outer space while reflecting solar radiation, represents a promising strategy for reducing energy consumption in cooling technologies. Here, a template-assisted strategy is introduced to fabricate nanostructured polyvinylidene fluoride (PVDF) radiative coolers via polymer infiltration into three-dimensional anodic aluminum oxide (3D-AAO) nanoporous templates. The optical properties and cooling performance of the 3D-PVDF nanostructures are investigated with and without the AAO template. To tune the crystalline phase composition and its influence on optical response, three post-infiltration cooling methods—natural, fast, and ultra-fast—are applied. A UV treatment further enhances solar reflectance through photo-oxidation-induced whitening. The optimized free-standing 3D-PVDF obtained via ultra-fast cooling exhibits an average solar reflectance of 82.4% (0.32–2.5 μm) and an infrared emissivity of 96.7% within the 8–13 μm atmospheric window. These properties correspond to a theoretical daytime cooling power density of 182.3 W m<sup>−2</sup> under a solar irradiance of 1000 W m<sup>−2</sup>. Outdoor measurements demonstrate a daytime temperature reduction of 12.9°C under peak solar irradiance of 962 W m<sup>−2</sup> relative to an empty reference box. This work establishes a scalable strategy for engineering three-dimensional polymer nanostructures for high-performance radiative cooling and energy-efficient building technologies., We acknowledge financial support from “ERC Consolidator Grant No. 101087974 COOLed”. We acknowledge the service from the MiNa Laboratory at IMN and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Template‐Assisted 3D‐PVDF Nanonetworks for Passive Daytime Radiative Cooling [Dataset]

  • Iglesias-Elcano, Amaia
  • Moreno-Sanabria, Luis
  • Martín-González, Marisol
  • Manzano, Cristina V.
Passive daytime radiative cooling (PDRC), which dissipates heat through infrared emission to outer space while reflecting solar radiation, represents a promising strategy for reducing energy consumption in cooling technologies. This Dataset is from the study in which we introduced a template-assisted strategy to fabricate nanostructured polyvinylidene fluoride (PVDF) radiative coolers via polymer infiltration into three-dimensional anodic aluminum oxide (3D-AAO) nanoporous templates. The optical properties and cooling performance of the 3D-PVDF nanostructures are investigated with and without the AAO template. To tune the crystalline phase composition and its influence on optical response, three post-infiltration cooling methods—natural, fast, and ultra-fast—are applied. A UV treatment further enhances solar reflectance through photo-oxidation-induced whitening. The optimized free-standing 3D-PVDF obtained via ultra-fast cooling exhibits an average solar reflectance of 82.4% (0.32–2.5 μm) and an infrared emissivity of 96.7% within the 8–13 μm atmospheric window. These properties correspond to a theoretical daytime cooling power density of 182.3 W m−2 under a solar irradiance of 1000 W m−2. Outdoor measurements demonstrate a daytime temperature reduction of 12.9°C under peak solar irradiance of 962 W m−2 relative to an empty reference box. This work establishes a scalable strategy for engineering three-dimensional polymer nanostructures for high-performance radiative cooling and energy-efficient building technologies., We acknowledge financial support from “ERC Consolidator Grant No. 101087974 COOLed”. We acknowledge the service from the MiNa Laboratory at IMN and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable thermoelectric materials based on metallic alloys and intermetallic compounds

  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
This review provides an overview of recent advances in metallic and intermetallic alloys, which have emerged as promising alternatives to traditionalsemiconductorthermoelectricsfor power generation and active solid-state cooling. Driven by the abundance, low toxicity, mechanical robustness, and manufacturability of these materials, we examine current trends in metallic (e.g., Cu–Ni, Ni–Fe, Ni–Au) and intermetallic (Heuslers, skutterudites, Zintl phases, silicon-rich silicides, clathrates, stannides, etc.) families to gain insight into the physical basis of their performance and to inform future developments. Unlike the traditional focus on high-zT semiconductors, we highlight the importance of high-power factor (PF = σ ⋅ S 2 ) in these materials for achieving compelling device-level performance, particularly for Peltier cooling under realistic thermal-resistance constraints. We also discuss phonon-engineering strategies to reduce lattice thermal conductivity while preserving electrical transport. The review concludes by exploring opportunities in thin films and microfabrication to unlock nanostructured architectures, conformal modules, and material-efficient devices. While some of the systems discussed (e.g., Ni–Au or Hf-rich half-Heuslers) are not intrinsically sustainable in terms of elemental abundance or cost, they are included to illustrate key physical mechanisms that can be translated to more sustainable material platforms, The authors would like to acknowledge financial support from “ERC Advanced Grant No. 01052602 PowerbyU.” We acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033, and Next Generation EU/PRTR (Grant No. EQC2021-006944-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Material Sustainable thermoelectric materials based on metallic alloys and intermetallic compounds [Dataset]

  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Martín-González, Marisol
Additional tables (SI and SII) and alternative text descriptions, This review provides an overview of recent advances in metallic and intermetallic alloys, which have emerged as promising alternatives to traditional semiconductor thermoelectrics for power generation and active solid-state cooling. Driven by the abundance, low toxicity, mechanical robustness, and manufacturability of these materials, we examine current trends in metallic (e.g., Cu–Ni, Ni–Fe, Ni–Au) and intermetallic (Heuslers, skutterudites, Zintl phases, silicon-rich silicides, clathrates, stannides, etc.) families to gain insight into the physical basis of their performance and to inform future developments. Unlike the traditional focus on high-zT semiconductors, we highlight the importance of high-power factor (PF = σ·S2) in these materials for achieving compelling device-level performance, particularly for Peltier cooling under realistic thermal-resistance constraints. We also discuss phonon-engineering strategies to reduce lattice thermal conductivity while preserving electrical transport. The review concludes by exploring opportunities in thin films and microfabrication to unlock nanostructured architectures, conformal modules, and material-efficient devices. While some of the systems discussed (e.g., Ni–Au or Hf-rich half-Heuslers) are not intrinsically sustainable in terms of elemental abundance or cost, they are included to illustrate key physical mechanisms that can be translated to more sustainable material platforms., The authors would like to acknowledge financial support from “ERC Advanced Grant No. 01052602 PowerbyU.” We acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033, and Next Generation EU/PRTR (Grant No. EQC2021-006944-P)., Peer reviewed