Pasar al contenido principal

DESARROLLO DE TECNOLOGIAS OPTOMECANICAS PARA PRUEBAS DE EFICACIA DE FARMACOS CONTRA EL CANCER BASADAS EN BIOFISICA CELULAR

PID2021-126993OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Square Membrane Resonators Supporting Degenerate Modes of Vibration for High-Throughput Mass Spectrometry of Single Bacterial Cells

  • Sanz-Jiménez, Adrián
  • Ruz Martínez, José Jaime
  • Gil-Santos, Eduardo
  • Malvar, Óscar
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Cano-Tortajada, Álvaro
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
In nanomechanical mass spectrometry, sensing devices are commonly placed in the vacuum environment and a stream of analytes is directed toward the sensor surface for measurement. Beam structures, such as double-clamped nanobeams and nanocantilevers, are commonly used due to their low inertial mass and the simplicity of the analytical models for mass extraction. The drawback of such structures is their low capture areas, compromising the capture efficiency and throughput of this technique. Bi-axisymmetric resonators, such as ultrathin square or circular membranes, arise as an optimal geometry to maximize capture efficiency while minimizing the device inertial mass. However, these structures present degenerate mechanical modes, whose frequency perturbations upon analyte adsorption are not well described by commonly used models. Furthermore, prior knowledge of the vibration mode shapes of the sensor is crucial for the correct calculation of the analyte’s mass, and the mode shape of degenerate modes may change significantly after every adsorption event. In this work, we present an accurate analytical theory to describe the effect of mass adsorption on the degenerate modes of square membrane resonators and propose two different methods based on the new theory to update the vibration mode shapes after every adsorption event. Finally, we illustrate the problem experimentally obtaining the mass and adsorption position of individual Escherichia coli K-12 bacterial cells on commercial square silicon nitride membranes fabricated with very small tolerances., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 731868 VIRUSCAN, by the ERC CoG grant 681275 “LIQUIDMASS”, and by 101034583-H2020-FETOPEN “VIRAIR”. It has received funding from the Spanish Science and Innovation Ministry through projects AES (DTS21/00136/ISCIII/Unión Europea/FEDER), “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/ 10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (PDC2022-133503-I00/MCIN/AEI/10.13039/ 501100011033/European Union/Next Generation EU/ PRTR), “ONCODEEPLASM” (PLEC2021-007892/MCIN/ AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid Y2020/BIO-65194 scCANCER-CM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring Vibrational Modes in Living Human Cells

  • Puerto Belda, Verónica
  • Ruz Martínez, José Jaime
  • Millá, Carmen
  • Cano-Tortajada, Álvaro
  • Yubero, Marina L.
  • García-López, Sergio
  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
The question of whether human living cells in physiological conditions exhibit mechanical resonances has remained unresolved for more than 70 years. We here construct a theoretical model to predict how these hypothetical vibration modes of a living cell can modify the stochastic response of a supporting micromechanical resonator. The key signatures that demonstrate the existence of these vibration modes are then searched for experimentally. To this aim, single human breast epithelial cells were attached to the surface of compliant small microcantilevers. Close examination of the frequency spectra of the thermal fluctuations of the microcantilever over a high-frequency range of 1 kHz–1 MHz revealed anomalies that are consistent with our theoretical predictions. We identify the stochastic coupling of the first and third vibration modes of the cell with the torsional and flexural vibration modes of the cantilever, respectively. These mechanical resonances are very broad and are located at 10–30 kHz and 150–180 kHz, respectively. The analysis of the experiments allows us to obtain information on the temporal evolution of several physical properties of the cell, in addition to the resonance frequencies, during the adhesion process—such as the mass, viscoelasticity, and contact area. These results open multiple avenues in our understanding of single cell mechanobiology, vibrational spectrometry of living cells and mechanical destruction of cancerous cells by targeting specific cell frequencies., This work was partially supported by the Spanish Science and Innovation Ministry through Projects No. RTI2018-099369-B-I00 [related Doctoral Fellowship No. (FPI) PRE2019-087448], No. AES (DTS21/00136)/ISCIII/ EU/FEDER, No. “CELLBIOPHYS” (PID2021-126993OBI00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (No. PDC2022-133503- I00/MCIN/AEI/ 10.13039/501100011033/European Union/Next Generation EU/PRTR), “ONCODEEPLASM” (No. PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR), and by Comunidad Autónoma de Madrid No. Y2020/BIO-65194 scCANCERCM. This work has also been supported by the private FERO Foundation and Elena Torres Cancer Association funding. We acknowledge the service from the Micro and Nanofabrication Laboratory, an X-SEM laboratory at IMN-CNM funded by the Comunidad de Madrid (Project No. S2018/NMT-4291 TEC2SPACE) and by MINECO (Project No. CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simultaneous Optical and Mechanical Sensing Based on Optomechanical Resonators

  • Sentre Arribas, Elena
  • Aparicio-Millán, Alicia
  • Lemaître, Aristide
  • Favero, Ivan
  • Tamayo de Miguel, Francisco Javier
  • Calleja, Montserrat
  • Gil-Santos, Eduardo
Optical and mechanical resonators have each been abundantly employed in sensing applications, albeit following separate development. Here we show that bringing together optical and mechanical resonances in a unique sensing device significantly improves the sensor performance. To that purpose, we employ nanoscale optomechanical disk resonators that simultaneously support high quality optical and mechanical modes localized in tiny volumes, which provide extraordinary sensitivities. We perform environmental sensing, but the conclusions of our work extend to other sensing applications. First, we determine optical and mechanical responsivities to temperature and relative humidity changes. Second, by characterizing mechanical and optical frequency stabilities, we determine the corresponding limits of detection. Mechanical modes appear more sensitive to relative humidity changes, while optical modes appear more sensitive to temperature ones, reaching, respectively, 0.05% and 0.6 mK of independent resolution. We then prove that simultaneous optical and mechanical monitoring enables disentangling both effects and demonstrates 0.1% and 1 mK resolution, even considering that both parameters may change at the same time. Finally, we highlight the importance of actively tracking the optical mode when optomechanical sensor devices. Not doing so enforces tedious independent calibration, influences the device sensitivity during the experiment, and shortens the sensing range. The present work hence clarifies the requirements for the optimal operation of optomechanical sensors, which will be of importance for chemical and biological sensing., This work was partially supported by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 731868-VIRUSCAN, by the “Fundación BBVA” under the program “Beca Leonardo a Investigadores y Creadores Culturales 2021” through the project DISOM, and by the “Fundación Ramón Areces” under the project OPTOCAP. E.G.-S. acknowledges the financial support by the Spanish Science and Innovation Ministry through Ramón y Cajal grant RYC-2019-026626-I. J.T. and M.C acknowledge the financial support by Spanish Science and Innovation Ministry through the projects “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE) and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR); and by “Comunidad Autónoma de Madrid” through the project Y2020/BIO- 65194 scCANCER-CM.I.F. I.F. acknowledges financial support from ERC NOMLI project (no 770933)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid mechanical phenotyping of breast cancer cells based on stochastic intracellular fluctuations

  • Cano-Tortajada, Álvaro
  • Yubero, Marina L.
  • Millá, Carmen
  • Puerto Belda, Verónica
  • Ruz Martínez, José Jaime
  • Kosaka, Priscila M.
  • Calleja, Montserrat
  • Malumbres, Marcos
  • Tamayo de Miguel, Francisco Javier
Predicting the phenotypic impact of genetic variants and treatments is crucial in cancer genetics and precision oncology. Here, we have developed a noise decorrelation method that enables quantitative phase imaging (QPI) with the capability for label-free noninvasive mapping of intracellular dry mass fluctuations within the millisecond-to-second timescale regime, previously inaccessible due to temporal phase noise. Applied to breast cancer cells, this method revealed regions driven by thermal forces and regions of intense activity fueled by ATP hydrolysis. Intriguingly, as malignancy increases, the cells strategically expand these active regions to satisfy increasing energy demands. We propose parameters encapsulating key information about the spatiotemporal distribution of intracellular fluctuations, enabling precise phenotyping. This technique addresses the need for accurate, rapid functional screening methods in cancer medicine., This work was partially supported by the Spanish Science and Innovation Ministry through projects RTI2018-099369-B-I00 (related doctoral fellowship [FPI] PRE2019-087448), AES (DTS21/00136)/ISCIII/EU/FEDER, “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCOLIGHT” (PDC2022-133503- I00/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR), and “ONCODEEPLASM” (PLEC2021- 007892/MCIN/AEI/10.13039/501100011033/European Union/Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid (Y2020/BIO- 65194 scCANCER-CM). This work has also been supported by private FERO Foundation and Elena Torres Cancer Association funding. We acknowledge the service from the Micro and Nanofabrication Laboratory and X-SEM laboratory at IMN-CNM funded by the Comunidad Autónoma de Madrid (project S2018/NMT-4291 TEC2SPACE) and by MINECO (project CSIC13-4E-1794 with support from FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiparametric quantification of bacterial cells using digital holographic microscopy

  • Cano-Tortajada, Álvaro
  • Sanz-Jiménez, Adrián
  • Malvar, Óscar
  • Ruz Martínez, José Jaime
  • Kosaka, Priscila M.
  • García-López, Sergio
  • Calleja, Montserrat
  • Tamayo de Miguel, Francisco Javier
The detection and quantification of the physical properties of bacterial cells are crucial for advancing precision microbiology. Here, we use digital holographic microscopy (DHM) to measure the dry mass of individual Staphylococcus epidermidis (S. epidermidis) and Escherichia coli (E. coli) cells with high throughput and rapid acquisition. We demonstrate that by processing quantitative phase images with polynomial background correction, Gaussian filtering, and adaptive masking, we are able to obtain, not only the dry mass of individual bacterial cells, but also detailed morphological information. These features allow the discrimination between single and clustered cocci, as well as the identification of elongation patterns in bacilli, that may provide relevant indicators of bacterial growth and physiological state. Finally, we compare the DHM dry mass distribution with those obtained by nanomechanical mass spectrometry (NMS), highlighting the potential and limitations of each technique., This work was supported by the European Union through HORIZON-EIC-2022-PATHFINDEROPEN Project VIRUSONG 101099058, by the Spanish MCIN through projects “CELLBIOPHYS” (PID2021-126993OB-I00/MCIN/AEI/10.13039/501100011033/FEDER, UE), “ONCODEEPLASM” (PLEC2021–007892/MCIN/AEI/10.13039/501100011033/European Union/ Next Generation EU/PRTR) and by Comunidad Autónoma de Madrid (S2022/BMD-7437, i-LUNG 20). This work has also been supported by FERO Fundación Elena Torres Cancer Association funding. We acknowledge the service from MiNa Laboratory at IMN, and founding from EU (FEDER, FSE), MCIN/AEI/10.13039/50110001.1033 and Next Generation EU/PRTR (EQC2021-006944-P)., Peer reviewed